4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers...
Transcript of 4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers...
![Page 1: 4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro A udio. NOTE: To prevent damage](https://reader036.fdocuments.us/reader036/viewer/2022071422/611bdcd2c636ff5e6b6ce9c3/html5/thumbnails/1.jpg)
MiniView™ Micro Audio4 Port KVM Switch with Built-in KVM Cables
Quick Start Guide (GCS614A)
®
![Page 2: 4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro A udio. NOTE: To prevent damage](https://reader036.fdocuments.us/reader036/viewer/2022071422/611bdcd2c636ff5e6b6ce9c3/html5/thumbnails/2.jpg)
Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro Audio.
NOTE: To prevent damage to your equipment due to static electric discharge, please make sure that all devices on the installation are properly grounded.
Step. 1
1. Connect your monitor to the female VGA port on your MiniView™ Micro Audio.
2. Connect your PS/2 keyboard into the PS/2 keyboard port on your MiniView™ Micro Audio.
3. Connect your PS/2 mouse into the PS/2 keyboard port on your MiniView™ Micro Audio.
4. Connect your speakers directly into the audio port on your MiniView™ Micro Audio.
![Page 3: 4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro A udio. NOTE: To prevent damage](https://reader036.fdocuments.us/reader036/viewer/2022071422/611bdcd2c636ff5e6b6ce9c3/html5/thumbnails/3.jpg)
1. Connect the VGA cable that is built into the KVM cable of your MiniView™ Micro Audio to the VGA port on your computer.
2. Connect the PS/2 keyboard cable that is built into the KVM cable of your MiniView™ Micro Audio to the PS/2 key-board port on your computer.
3. Connect the PS/2 mouse cable that is built into the KVM cable of your MiniView™ Micro Audio to the PS/2 mouse port on your computer.
4. Connect the speaker cable that is built into the KVM cable of your MiniView™ Micro Audio to the speaker port on your computer.
Step. 2
![Page 4: 4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro A udio. NOTE: To prevent damage](https://reader036.fdocuments.us/reader036/viewer/2022071422/611bdcd2c636ff5e6b6ce9c3/html5/thumbnails/4.jpg)
Repeat step 2 for the rest of you computers.
Turn on the power to the computers.
OperationAccessing all of your computers from a single console could not be easier. The GCS614A uses Hotkey combinations to give the KVM focus to the computer of your choice.
The GCS614A provides the following Hotkey features:
• Selecting the Active Port• Auto Scan Mode
Please refer to Page 11 of the GCS614A user manual for details on Hotkey operations.
Step. 3
Step. 4
![Page 5: 4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro A udio. NOTE: To prevent damage](https://reader036.fdocuments.us/reader036/viewer/2022071422/611bdcd2c636ff5e6b6ce9c3/html5/thumbnails/5.jpg)
Congratulations!
Congratulations! You have completed installing the IOGEAR® MiniView™ Micro Audio.
![Page 6: 4 Port KVM Switch with Built-in KVM Cables€¦ · Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro A udio. NOTE: To prevent damage](https://reader036.fdocuments.us/reader036/viewer/2022071422/611bdcd2c636ff5e6b6ce9c3/html5/thumbnails/6.jpg)
MiniView™ Micro Audio4 Port KVM Switch with Built-in KVM Cables
Quick Start Guide (GCS614A)
IOGEAR23 Hubble DriveIrvine, CA 92618
866.946.4327949.453.8785Web-site: www.iogear.comE-mail: [email protected]
Entire contents copyright 2003 IOGEAR®
All rights reserved. Reproduction in whole or in part without permission is prohibited. MiniView™ is a trademark of IOGEAR®. All other trade marks are the property of their respective owners.PKG-M0089/QS
®