8/10/2019 4 Foundation .pdf

1/5

20

FOUNDATION.

8/10/2019 4 Foundation .pdf

2/5

8/10/2019 4 Foundation .pdf

3/5

8/10/2019 4 Foundation .pdf

4/5

23

FOUNDATION

REINFORCEDCONCRETEPILE E S

Pile Cap Detailings

Pile Cap Construction Process

1.Shuttering and ReinforcingPlacing the Re-bar inside the frame work before pouring in the cement. The materials used are long

twisted steel bars between piles held in shape by thinner tie wires.

2. Setting up FrameworkOnce the steel mat is laid, timber is attached around the perimeter to contain the wet concrete

mixture.

3.Pouring in the ConcreteThe concrete contains an aggregate of small rocks and cement. Once poured, The concrete is

stirred to remove any air pockets that might weaken the structure when set. The concrete undergoes

an exothermic chemical change as it hardens and this produce a lot of heat.

Column

Expansionjoint

Pile Cap

Pile

Floor Slab

Crushed Stones

Pile Cap

Reinforce Bar N3

Reinforce Bar N2

Reinforce Bar N1

Pile

Mud Slab

N1N2/N3

Pile Cap Plan

Pile Cap Section

Pile Cap Elevation

8/10/2019 4 Foundation .pdf

5/5

24

FOUNDATIONREINFORCEDCONCRETEPILE

E S

Column Load

Spaced 2-6 to 4-0

Load Bearing Wall

Reinforced Concrete

Grade

Standing Pile Foundation

Piles depend on the bearing

resistance of the rock or soil layer

beneath their feet for support

Pile Section

Steel Shoe

or

Rock Shoe

Reinforce Steel BarConcrete

Pile FoundationElevationThikness

:3

Thickness :6Thickness may vary from

column load

Types of Pointed PileShoe

X-pointed shoe: Moderate to hard driving Fabricated Pointed Shoe: Normal hard driving

Cast-iron Pointed Shoe: Normal hard driv-

ingOlso Point: Hard Driving