3sectional projection (Engineering Graphics Drawing)
-
Upload
mit -
Category
Engineering
-
view
236 -
download
14
Transcript of 3sectional projection (Engineering Graphics Drawing)
![Page 1: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/1.jpg)
Section Views
![Page 2: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/2.jpg)
TOPICS
Introduction
Terminology & common practices
Kind of sections
Dimensioning
![Page 3: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/3.jpg)
Projection Systems
![Page 4: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/4.jpg)
Introduction
![Page 5: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/5.jpg)
ObjectObject
GRAPHICS COMMUNICATION WITH ENGINEERING DRAWING
WorkingdrawingWorkingdrawing
Clear ?
Orthographicprojection
(convention)
Section viewsconvention
Section Views
Orthographic Projection
Finish
Yes
No
Dimensioning
![Page 6: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/6.jpg)
PURPOSES OFSECTION VIEWS
Clarify the views by
Facilitate the dimensioning.
reducing or eliminating the hidden lines.
revealing the cross sectional’s shape.
Let See the example
![Page 7: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/7.jpg)
EXAMPLE : Advantage of using a section view.
![Page 8: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/8.jpg)
Terminology andcommon practices
![Page 9: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/9.jpg)
Cuttingplane
CUTTING PLANE
Cutting plane line
Cutting plane is a plane that imaginarily cuts
the object to reveal the internal features.
Section lines
![Page 10: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/10.jpg)
Cutting plane line is an edge view of the cutting
plane.
CUTTING PLANE LINE
Indicate the pathof cutting plane.
![Page 11: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/11.jpg)
ANSIstandard
Thick line
Thick line
JIS & ISOstandard
Thin line
CUTTING PLANE LINESTYLES
Viewingdirection
Viewingdirection
Viewingdirection
This course
![Page 12: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/12.jpg)
SECTION LINING
Section lines or cross-hatch lines are used to
indicate the surfaces that are cut by the cutting
plane.
Sectionlines
Drawn with 4H pencil.
![Page 13: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/13.jpg)
SECTION LINES SYMBOLS
The section lines are different for each of
material’s type.
Cast iron,Malleable iron
Steel Concrete Sand Wood
For practical purpose, the cast iron symbol is
used most often for any materials.
![Page 14: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/14.jpg)
Hatch Patterns
![Page 15: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/15.jpg)
SECTION LINING PRACTICE
The spaces between lines may vary from 1.5 mm
for small sections to 3 mm for large sections.
COMMON MISTAKE
![Page 16: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/16.jpg)
SECTION LINING PRACTICE
It should not be drawn parallel or perpendicular
to contour of the view.
COMMON MISTAKE
![Page 17: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/17.jpg)
Kinds of Sections
![Page 18: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/18.jpg)
KIND OF SECTIONS
1. Full section
2. Offset section
3. Half section
4. Broken-out section
5. Revolved section (aligned section)
6. Removed section (detailed section)
7. Aligned Section
![Page 19: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/19.jpg)
FULL SECTION VIEW
The view is made by passing the straight cutting
plane completely through the part.
![Page 20: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/20.jpg)
OFFSET SECTION VIEWThe view is made by passing the bended cutting
plane completely through the part.
Do not show the edge viewsof the cutting plane.
![Page 21: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/21.jpg)
TREATMENT OF HIDDEN LINES
Hidden lines are normally omitted from section
views.
![Page 22: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/22.jpg)
HALF SECTION VIEWThe view is made by passing the cutting plane halfway
through an object and remove a quarter of it.
![Page 23: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/23.jpg)
HALF SECTION VIEW
A center line is used to separate the sectioned half
from the unsectioned half of the view.
Hidden line is omitted in unsection half of the view.
![Page 24: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/24.jpg)
The view is made by passing the cutting plane normal
to the viewing direction and removing the portion of an
object in front of it.
BROKEN-OUT SECTION VIEW
![Page 25: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/25.jpg)
A break line is used to separate
the sectioned portion from the
unsectioned portion of the view.
BROKEN-OUT SECTION VIEW
There is no cutting plane line.
Break line is a thin continuous
line (4H) and is drawn freehand.
![Page 26: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/26.jpg)
EXAMPLE : Comparison among several section techniques
![Page 27: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/27.jpg)
Revolved sections show cross-sectional features of a part.
No need for additional orthographic views.
This section is especially helpful when a cross-section varies.
REVOLVED SECTION VIEW
![Page 28: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/28.jpg)
REVOLVED SECTION VIEW
Basic concept
![Page 29: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/29.jpg)
REVOLVED SECTION VIEW
Basic concept
![Page 30: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/30.jpg)
Given
Step 1
a. Assign position of cutting plane.
b. Draw axis of rotation in front view.
Steps in construction
REVOLVED SECTION VIEW
Edge view of Edge view of cross-sectioncross-section
![Page 31: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/31.jpg)
Steps in construction
Given
a. Transfer the depth dimension to
the front view.
REVOLVED SECTION VIEW
Step 2
![Page 32: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/32.jpg)
Steps in construction
Given
REVOLVED SECTION VIEW
a. Draw the revolved section.
Step 3
b. Add section lines.
![Page 33: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/33.jpg)
Steps in construction
Given
REVOLVED SECTION VIEW
FINAL PICTURE
![Page 34: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/34.jpg)
Placement of revolved section
1. Superimposed to orthographic view.
SuperimposedBreak
2. Break from orthographic view.
REVOLVED SECTION VIEW
![Page 35: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/35.jpg)
6. Removed section
Removed section is revolved section.
Used where space does not enough for revolved section
Can be located elsewhere on a drawing with properly labeled
REMOVED SECTION VIEW
Section view is shown outside the view.
![Page 36: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/36.jpg)
Example : Revolved vs. removed sections.
Revolved section Removed section
REMOVED SECTION VIEW
![Page 37: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/37.jpg)
Example : Situation that removed section is preferred.REMOVED SECTION VIEW
PreferredPoor
Too messy !!
![Page 38: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/38.jpg)
Example : Multiple removed section viewsREMOVED SECTION VIEW
A
A
B
B
SECTION A – A
SECTION B – B
![Page 39: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/39.jpg)
Aligned Sections
Aligned sections use an angled cutting plane to pass through angled features. The plane and feature are then imagined to be revolved into the original plane and the section projected from there
![Page 40: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/40.jpg)
Aligned Sections
![Page 41: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/41.jpg)
Dimensioningin Section View
![Page 42: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/42.jpg)
In most cases, dimensioning of the section views
follows the typical rules of dimensioning.
GOODPOOR
![Page 43: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/43.jpg)
GOODPOOR
50
10
50
10
DIMENSIONING
![Page 44: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/44.jpg)
For a half-section view,
use dimension line with
only one arrowhead that
points to the position inside
the sectioned portion.
50
DIMENSIONING
![Page 45: 3sectional projection (Engineering Graphics Drawing)](https://reader034.fdocuments.us/reader034/viewer/2022042510/5589abd5d8b42ab3448b456d/html5/thumbnails/45.jpg)
PARTS IN WHICH SECTIONS ARE NOT TO BE SHOWN