3D-MA2 design by Giovanni Bellini design alike · PDF file3D-MA2 _ design by Giovanni Bellini...
Transcript of 3D-MA2 design by Giovanni Bellini design alike · PDF file3D-MA2 _ design by Giovanni Bellini...
3D-MA2 _ design by Giovanni Bellini
3D-MA2 by Giovanni Bellini is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Permissions beyond the scope of this license may be available at http://www.designalike.org. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/.
design alike www.designalike.org
Il materiale utilizzato è stato gentilmente concesso da Leroy Merlin.Thanks to Leroy Merlin for the material supply.
3d-MA2 è un supporto lampada flessibile dai mille utilizzi. Leggerissima ma resistente e semplice da riporre: si monta senza colla ne viti! Insieme alla lampada K-R-7UC ti per-metterà di divertirti ad illuminare creativamente i tuoi spazi.
3d-MA2 is a 1000 uses lamp stand. It is lightweight but tough and simple to disas-semble when not used: there’s no need for screws or glue for its assembling. Using it together with K-R-7UC lamp you will be going to have fun in lighting up your personal spaces in a creative way.
3D-MA2 _ design by Giovanni Bellini
3D-MA2 by Giovanni Bellini is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Permissions beyond the scope of this license may be available at http://www.designalike.org. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/.
design alike www.designalike.org
Il materiale utilizzato è stato gentilmente concesso da Leroy Merlin.Thanks to Leroy Merlin for the material supply.
Lista degli attrezzi e dei materiali necessari:List of tools and bill of materials:
Usare una punta da trapano per il legno da 6 mm e una fresa a tazza da 25 mm.Use 6 mm diameter drill bids and a hole-saw of 25 mm in diameter.
Immagineimage
ref. pezzoelement
caratteristichespecifications
N° costo unitàunit cost
tot.
a tondo di legno d.20 mmhardwood dowel d.20mm
bastone a progilo tondo di legno diam. 20mm x 2450mmhardwood dowel d.25x2450mm
3 € 3.90 € 11.70
b tavola di abete 500x1000lumber 500x1000mm
tavola listellare di abete spess. 18 mm lumber 500x1000mm
1 € 5.30 € 5.30
c cordino coloratocoloured cord
corda colorata in polipropilene o altro materiale con diametro 2,8 -‐ 3,5 mm.coloured pp cord d. 2,8-‐ 3,5mm.
1 m € 4,40 per 20 m
€ 4.40
f1 tasselli in faggiowood dowel pins
tasselli in faggio d.6x30mmwood dowel pins d.6x30mm
3 €1,60 x 50 pz.
€ 1.60
f2 piedini in gommarubber feet
piedini in gomma avvolgenti d.20mmrubber feet d. 20mm
3 €3,10 per 4 piedini
€ 3.10
f3 gancio a ss-‐hook
gancio a s s-‐hook
1 €0,70 4pcs. € 0.70
tot. € 26.80
3D-MA2 _ design by Giovanni Bellini
3D-MA2 by Giovanni Bellini is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Permissions beyond the scope of this license may be available at http://www.designalike.org. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/.
design alike www.designalike.org
Il materiale utilizzato è stato gentilmente concesso da Leroy Merlin.Thanks to Leroy Merlin for the material supply.
2045
344
421
470
381
3D-MA2 _ design by Giovanni Bellini
3D-MA2 by Giovanni Bellini is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Permissions beyond the scope of this license may be available at http://www.designalike.org. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/.
design alike www.designalike.org
Il materiale utilizzato è stato gentilmente concesso da Leroy Merlin.Thanks to Leroy Merlin for the material supply.
d.25
d.440
3222
0
3601380320
d.6 d.6A
B
C
(spessore/thickness)d.440
d.2,8
(cordino/thread)
c
B b1
110
206d.20
C
aA
1
3
18
sezionecross section
quantitáquantity
lunghezzalenght
ref.
3D-MA2 _ design by Giovanni Bellini
3D-MA2 by Giovanni Bellini is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Permissions beyond the scope of this license may be available at http://www.designalike.org. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/.
design alike www.designalike.org
Il materiale utilizzato è stato gentilmente concesso da Leroy Merlin.Thanks to Leroy Merlin for the material supply.
f1
A
f1
B
A
f2
f1
C
f2
f2
A
Guarda il video tutorial per eseguire il nodo.Watch the video tutorial for making the knot.
3D-MA2 _ design by Giovanni Bellini
3D-MA2 by Giovanni Bellini is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Permissions beyond the scope of this license may be available at http://www.designalike.org. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/.
design alike www.designalike.org
Il materiale utilizzato è stato gentilmente concesso da Leroy Merlin.Thanks to Leroy Merlin for the material supply.
Declinazione di responsabilità
Designalike ed i designer declinano ogni responsabilità relativa alla realizzazione ed all’utilizzo di oggetti derivati dai design a disposizione su http://www.designalike.org. L’utilizzatore accetta che Designalike ed i designer non sono da ritenersi responsabili per l’esito positivo o negativo delle azioni relative alla realizzazione, all’assemblaggio ed all’utilizzo dei prodotti.
L’utilizzatore espressamente accetta di non considerare Designalike ed i designer responsabili per alcun danneggiamento di cose, infortuni e/o decesso o ogni altra perdita o danneggiamento relativi all’utilizzo delle istruzioni e/o dei design forniti.
L’utilizzatore, inoltre, accetta che l’utilizzo dei design, dei prodotti o dei contenuti del sito http://www.designalike.org è da ritenersi a proprio rischio e pericolo e privo di qualsiasi garanzia.
Disclaimer
The use of Designalike designs should be based on your own due diligence and you agree that Designalike and the designers are not liable for any success or failure of your actions you take to produce or assemble your products.
You expressly agree to hold Designalike and the designers harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or designs provided.
You further agree that use of this design and all products or content contained herein are at your own risk and there is no warranty expressly made herein.