Binks Model 81-820STAINLESS STEEL

DRIP-PROOF 1-QUART SIPHON CUP ASSEMBLY

3/8 NPS THREAD SWIVEL NUT

PARTS LISTWhen ordering, please specify Part No.

ITEM PARTNO. NO. DESCRIPTION QTY.

1 81-821* COVER ASSEMBLY ............................ 12 82-375 SS CUP ASSEMBLY ............................ 13 54-4325 CONNECTOR .................................... 2

* 81-821 Cover Assembly may be purchased separately. Item Nos. 3, 4 and 5 (qty. 1) are also included with 81-821.

ITEM PARTNO. NO. DESCRIPTION QTY.

4 81-803� DRIP PROOF TUBE (Plus one spare) .... 25 TGC-9� GASKET ............................................ 1

� Available in quantity pack. For Drip Proof Tubes order 81-803-K5 (qty. 5). For Gaskets order TGC-9-K5 (qty. 5).

CAUTIONKeep tube and tube connectors cleanof paint. Accumulation of paint in thetube or connectors can plug them andprevent material flow.

!

Replaces Part Sheet 77-2821R

Part Sheet

77-2821R-1

U.S.A./Canada Customer Service

195 Internationale Blvd. Glendale Heights, IL 60139 630-237-5000

Toll Free Customer Service and Technical Support 800-992-4657

Toll Free Fax 888-246-5732

Binks Sales and Service: www.binks.com

WARRANTY This product is covered by Binks’ 1 Year Limited Warranty.

3/12 ©2012 Binks All rights reserved. Printed in U.S.A.

77-2821R-1 Revisions: (P2) Added Prop 65 warning;updated contact information.

WARNING!

In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as follows:

CAUTIONHazards or unsafe practices which couldresult in minor personal injury, productor property damage.

!WARNINGHazards or unsafe practices which couldresult in severe personal injury, death orsubstantial property damage.

! NOTEImportant installation, operation ormaintenance information.

Read the following warnings before using this equipment.

FOR FURTHER SAFETY INFORMATION REGARDING BINKS AND DEVILBISS EQUIPMENT, SEE THE GENERAL EQUIPMENT SAFETY BOOKLET (77-5300).

READ THE MANUALBefore operating finishing equipment, read andunderstand all safety, operation and maintenanceinformation provided in the operation manual.

AUTOMATIC EQUIPMENTAutomatic equipment may start suddenly withoutwarning.

INSPECT THE EQUIPMENT DAILYInspect the equipment for worn or broken partson a daily basis. Do not operate the equipmentif you are uncertain about its condition.

NEVER MODIFY THE EQUIPMENTDo not modify the equipment unless themanufacturer provides written approval.

KNOW WHERE AND HOW TO SHUT OFF THEEQUIPMENT IN CASE OF AN EMERGENCY

PRESSURE RELIEF PROCEDURE Always follow the pressure relief procedure in theequipment instruction manual.

NOISE HAZARDYou may be injured by loud noise. Hearingprotection may be required when using thisequipment.

STATIC CHARGEFluid may develop a static charge that must bedissipated through proper grounding of theequipment, objects to be sprayed and all otherelectrically conductive objects in the dispensingarea. Improper grounding or sparks can cause ahazardous condition and result in fire, explosionor electric shock and other serious injury.

FIRE AND EXPLOSION HAZARDNever use 1,1,1-trichloroethane, methylenechloride, other halogenated hydrocarbon solventsor fluids containing such solvents in equipmentwith aluminum wetted parts. Such use couldresult in a serious chemical reaction, with thepossibility of explosion. Consult your fluidsuppliers to ensure that the fluids being used arecompatible with aluminum parts.

WEAR SAFETY GLASSESFailure to wear safety glasses with side shieldscould result in serious eye injury or blindness.

OPERATOR TRAININGAll personnel must be trained before operatingfinishing equipment.

EQUIPMENT MISUSE HAZARDEquipment misuse can cause the equip ment torupture, malfunction, or start unexpectedly andresult in serious injury.

KEEP EQUIPMENT GUARDS IN PLACEDo not operate the equipment if the safetydevices have been removed.

PROJECTILE HAZARDYou may be injured by venting liquids or gasesthat are released under pressure, or flying debris.

PINCH POINT HAZARDMoving parts can crush and cut. Pinch points arebasically any areas where there are moving parts.

DE-ENERGIZE, DEPRESSURIZE, DISCONNECT AND LOCK OUT ALL POWER SOURCES DURINGMAINTENANCEFailure to De-energize, disconnect and lock outall power supplies before performing equipmentmaintenance could cause serious injury or death.

TOXIC FLUID & FUMESHazardous fluid or toxic fumes can cause seriousinjury or death if splashed in the eyes or on the skin,inhaled, injected or swallowed. LEARN and KNOWthe specific hazards of the fluids you are using.

WEAR RESPIRATORToxic fumes can cause serious injury or death ifinhaled. Wear a respirator as recommended bythe fluid and solvent manufacturer’s MaterialSafety Data Sheet.

PROP 65 WARNINGWARNING: This product contains chemicals knownto the State of California to cause cancer andbirth defects or other reproductive harm.

CA PROP

65