371

6.0

BIBLIOGAPHIE

1- Viala, J.C., Bouix, J., Gonzalez, G., Esnouf, C , Chemical reactivity of aluminium with

boron carbide, Journal of Materials Science, 32, p.4559-4573,1997.

2- Beidler, C.J., Hauth III, W.E., Goel, A., Development of a B4C/AI Cermet use as an

improved structural neutron absorber, Journal of testing and evaluation, p.67-70,

1992.

3- Smith, C.A., Discontinuous reinforcements for metal matrix composites, (Materials

Park, Ohio: ASM International), volume 21, Composites, p.51-55,2001.

4- Campbell, J., Castings, (Oxford, Great Britain: Butterworth-Heinemann), p.74, 1999.

5- Chen, X.-G., Interface reaction of boron carbide in aluminum matrix composites and

its control, EDP Congress 2005, Mark Schlesinger, Ed., TMS, p.101-106, 2005.

6- Zhang, Z., Chen, X.-G., Charette, A., Ghomashchi, R., Effect of titanium on

solidification microstructure of Al-16%B4C composites, 44th annual conference of

metallurgists of CM, J.-P. Martin, Ed., Light metals 2005, Calgary, Canada, p.447-456,

2005.

7- Zhang, Z., Chen, X.-G., Charette, A., Microstructure characterization of Al-7%Si-

10%B4C die casting composites, Solidification Processing of metal matrix composites

- Rohatgi honorary symposium, Gupta, N. and Hunt, W.H., Ed., TMS, 2006.

372

8- Kennedy, A.R., The microstructure and mechanical properties of Al-Si-B4C metal

matrix composites, Journal of Materials Science, 37, p.317-323; 2002.

9- Chemyshova, T.A., Rebrov, A.V., Interaction kinetics of boron carbide and silicon

carbide with liquid aluminum, Journal of the less-common metals, 117, p.203-207,

1986.

10-Chemyshova, T.A., Rebrov, A.V., Kobela, L.I., Products of interaction in contact of

molten aluminum with boron fibers with a B4C coating, Metal Science and Heat

Treatment, 27 (3-4), p.320-324, 1985.

11-Lee, K.B., Sim, H.S., Cho, S.Y., Kwon, H., Reaction products of Al-Mg/B4C

composite fabricated by pressureless infiltration technique, Material Science and

Engineering, A302, p.227-234, 2001.

12-Jung, J., Kang, S., Advances in manufacturing boron carbide-aluminum composites,

J. Am. Ceram. Soc, 87 (1), p.47-54, 2004.

13-Kouzeli, M., San Marchi, C , Mortensen, A., Effect of reaction on the tensile

behaviour of infiltrated boron carbide-aluminum composites, Material Science and

Engineering, A337, p.264-273,2002.

14-Pysik, A.J., Beaman, D.R., Al-B-C phase development and effects on mechanical

properties of B4C/Al-derived composites, Journal of the American Ceramic Society, 78

(2),p.305-312, 1995.

15-Halverson, D.C., Pysik, A.J., Aksay, LA., Snowden, W.E., Processing of boron

carbide-aluminum composites, Journal of the American Ceramic Society, 75 (5),

p.775-780, 1989.

373

16- Shorowordi, K.M., Laoui, T., Haseeb, A.S.M.A., Celis, J.P., Froyen, L., Microstructure

and interface characteristics ofB4C, SiC and AI2O3 reinforced Al matrix composites:

a comparative study, Journal of Materials Processing Technology, 142, p.738-743,

2003.

17-Arslan, G., Kara, F., Turan, S., Quantitative X-ray diffraction analysis of reactive

infiltrated boron carbide-aluminium composites, Journal of the European Ceramic

Society, 23, p.1243-1255, 2003.

18-Arslan, G., Kara, F., Turan, S., Phase studies of reactive infiltrated boron carbide-

aluminium composites by quantitative XRD, Key Engineering Materials, Vols 206-

213, p.759-762, 2002.

19-Frage, N., Levin, L., Frumin, N., Gelbstein, M. Dariel, M.P., Manufacturing B4C-(Al-

Si) composite materials by metal alloy infiltration, Journal of Materials Processing

Technology 143-144, p.486-490, 2003.

20-Arslan, G., Kara, F., Turan, S., Reaction model for the boron carbide/aluminium

system, Key Engineering Materials, Vols 264-268, p. 1059-1062,2004.

21-Arslan, G., Kara, F., Turan, S., Microstructural characterisation of melt infiltrated

boron carbide-aluminium composites, Electron Microscopy and Analysis Group Conf.

2001, Institute of Physics Conference Series, No 168, p.311-314,2001.

22-Zhang, F., Trumble, K.P., Bowman, K.J., Low - Temperature infiltrated of boron

carbide � aluminum composites, Advances in Ceramic Matrix Composites VIII, 139,

p.27-38,2002.

374

23-Pysik, A.J., Aksay, LA., Microdesigning of B4C-AI cermets, Proceedings of the

international symposium on advances in processing of ceramic and metal matrix

composites, Halifax, August 20-24, p.269-280, 1989.

24-Kennedy, A.R., Brampton, B., The reactive wetting and incorporation of B4Cparticles

into molten aluminium, Scripta mater., 44, p. 1077-1082, 2001.

25- Lucas, J.P., Stephens, J.J., Greulich, F.A., The effect of reinforcement stability on

composition redistribution in cast aluminum metal matrix composites, Materials

Science and Engineering, A131, p.221-230, 1991.

26-Mogilevsky, P., Gutmanas, E.Y., Gotman, I., Telle, R., Reactive formation of coatings

at boron carbide interface with Ti and Cr powders, Journal of the European Ceramic

Society, 15, p.527-535, 1995.

27-Lee, B.-S., Kang, S., Low-temperature processing of B4C-AI composites via

infiltration technique, Materials Chemistry and Physics, 67, p.249-255, 2001.

28- Kevorkijan, V. Kosmac, T., Kristoffer, K., Spontaneous reactive infiltration of porous

ceramic performs with Al-Mg in the presence of both magnesium and nitrogen � new

experimental evidence, Materials and manufacturing processes, 17 (3), p.307-322,

2002.

29-Lee, K.B., Sim, H.S., Cho, S.Y., Kwon, H., Tensile properties of 5052 Al matrix

composites reinforced with B4C particles, Metallurgical and materials transactions A,

Vol. 32A, p.2142-2147, 2001.

30-Flemings, M C; Solidification processing, McGraw-Hill, USA, 1974.

375

31-Flemings, M.C., Fluidity of metals � techniques for producing ultra-thin section

castings, The British Foundryman, 57, p.312-325, 1964.

32-Niesse, J.E., Flemings, M.C., Taylor, H.F., Application of theory in understanding

fluidity of metals, Transaction of the American foundryman's society, 67, p.685-697,

1959.

33-Flemings, M.C., Niiyama, E., Taylor, H.F., Fluidity of aluminium alloys: An

experimental and quantitative evaluation, Transaction of the American foundryman's

society, 69, p.625-635, 1961.

34-Rohatgi, P.K. ., Sathyamoorthy, R., Narendranath, C.S., Nath, D., Studies on casting

characteristics and settling behaviour of Al-base SiC-particle metal matrix

composites, AFS transaction, 121, p.579-604, 1993.

35-Yarandi, F.M., Rohatgi, P.K., Ray, S., Settling, casting fluidity and solidification

behaviour of aluminum-SiC particle composite, Key Engineering Materials, 79-80,

p.91-104,1993.

36-Rohatgi, P., Cast metal-matrix composites, Metals Handbook, Ninth Edition, Volume

15: Casting, (Metals Park, Ohio: ASM International), 1978.

37-Ravi, V.A., Frydrych, D.J., Nagelberg, A.S., Effect of particle size, shape and loading

on fluidity of SiC-Reinforced aluminum MMCs, AFS transactions, 177, p.891-895,

1994.

38-Surappa, M.K., Rohatgi, P.K., Fluidity of aluminium-silicon-alumina composite,

Metallurgical transactions B, 12B, p.327-332,1981.

376

39-Lloyd, D.J., The solidification microstructure of particulate reinforced

aluminium/SiC composites, Composites Science and Technology, 35, p. 159-179, 1989.

40-Wang, J., Guo, Q., Nishio, M , Ogawa, H., Shu, D., Li, K., He, S., Sun, B., The

apparent viscosity of fine particle reinforced composite melt, Journal of Materials

Processing Technology, 136, p.60-63,2003.

41-Lloyd, D.J., Particle reinforced aluminium and magnesium matrix composites,

International Materials Reviews, 39 (1), p. 1-23, 1994.

42-Hashim, J., Looney, L., Hashmi, M.S.J., Particle distribution in cast metal matrix

composites - Part I, Journal of Materials Processing Technology, 123, p.251-257,

2002.

43-Kolsgaard, A., Brusethaug, S., Fluidity of aluminium alloy AlSi7Mg-SiC particulate

composite melts, Materials Science and Technology, 10 (6), p.545-551, 1994.

44-Lin, C.B., Hung, Y.W., Liu, W.-C, Kang, S.-W., Machining and fluidity of

356Al/SiC(P) composites, Journal of Materials Processing Technology, 110, p. 152-159,

2001.

45-Yarandi, F.M., Rohatgi, P.K., Ray, S., Fluidity and microstructure formation during

flow of Al-SiC particle composites, Journal of materials engineering and performance,

2 (3), p.359-364,1993.

46- Lloyd, D.J., Jin, I., Melt processed aluminum matrix particle reinforced composites,

Alcan International Limited, Kingston, ON, Canada, p.555-577, Année de publication

inconnue.

377

47-Rohatgi, P., Asthana, R., Solidification science in cast MMCs: The influence of

Merton Flemings, JOM, 53 (9), p.9-13, 2001.

48- Samuel, A.M., Samuel, F.H., On the castability of Al-Si / SiC particle-reinforced

metal-matrix composites: Factors affecting fluidity and soundness, Composites

Science and Technology, 47, p. 1-12,1993.

49-Lloyd, D.J., Jin, I., Weatherly, G.C., Controlling the interface reaction in alumina

reinforced aluminum composites, Scripta Metallurgica et Materialia, 31 (4), p. 393-

396,1994.

50-Lloyd, D.J., Jin, I., A method of assessing the reactivity between SiC and molten Al,

Metallurgical Transactions A, 19A, p. 3107-3109, 1988.

51- Shahverdi, H.R., Ghomashchi, M.R., Shabestari, S., Hejazi, J., Kinetics of interfacial

reaction between solid iron and molten aluminium, Journal of Materials Science, 37,

p. 1061-1066,2002.

52- Ragone, D.V., Adams, CM., Taylor, H.F., A new method for determining the effect of

solidification range on fluidity, Transaction of the American Foundryman's Society,

64, p.653-657, 1956.

53-Gokhale, A.M., Quantitative characterization and representation of global

microstructural geometry, ASM Handbook, Volume 9, p.429, 2004.

54-Smith, C.S., Guttman, L., Measurement of internal boundaries in three-dimensional

structures by random sectioning, Transaction AIME, vol. 97, p.81-87, 1953.

378

55- Schuster, J.C., A reinvestigation of thermal decomposition of aluminium carbide and

the constitution of the Al-C system, Journal of phase equilibria, 12 (5), p.546-549,

1991.

56-Van Hom, K.R., Aluminium VoLl Properties, physical metallurgy and phase

diagrams, American society for metals, Metals Park, Ohio, p.368, 1968.

57-Zhang Z., Chen X.-G., Charette, A. Particle distribution and interfacial reactions of

Al-7%Si-10%B4C die casting composite, À être publié.

58-FactSage 5.4, © 1976-2005 Thermfact Ltd, Montréal, Canada, www.crct.polymtl.ca.

59-Ribeiro, R.A., Bud'ko, S.L., Petrovic, C , Canfield, P.C., Carbon doping of

superconducting magnesium diboride, Physica C, 384, p.227-236, 2003.

60- Mollard, F.R., Flemings, M.C., Niyam, E.F., Understanding aluminum fluidity, the

key to advanced cast products, Transaction of the American Foundrymen's Society, 95,

p.647-652, 1987.

61-Easton, M., StJohn, D., Grain refinement of aluminium alloys: Part II. Confirmation

of, and mechanism for, the solute paradigm, Metallurgical and materials transactions

A, Vol. 30A (6), p. 1625-1633, 1999.

62-Lide, D.R., CRC Handbook of Chemistry and Physics, 84th edition, CRC Press LLC,

2003.

63-Gale, W.F., Totemeier, T.C., Smithells Metals Reference Book, 8th edition, Elsevier

Inc, 2004.

64-Xiao-Lin, Z., Ke, L., Xiang-Rong, C , Jun, Z., Structural and thermodynamic

properties ofAlB2 compound, Chinese Physics Society, Vol 15(12), 2006.

379

65-Raznjevic, K., Handbook of Thermodynamic tables and charts, McGraw-Hill Book

Company, 1976.

66-Meyer, F.D., Hillebrecht, H., Synthesis and crystal structure of A13BC, the first

boridecarbide of aluminium, Journal of alloys and compounds, vol. 252, p. 98-102,

1997.