· 3650 Dilsen - Stokkem (BE) In order to be able to pick up the Lots, the total amount due has to...
Transcript of · 3650 Dilsen - Stokkem (BE) In order to be able to pick up the Lots, the total amount due has to...
1708. Vehicles, Containers, Cranes
Sale Information
Number of items : 61
Location : Dilsen - Stokkem (Belgium)
Start date : 03 March 2020 as from 17:00
End date : 17 March 2020 as from 18:50
Viewing day : 10 March 2020 from 10:00 to 12:00
Bekaertlaan, 30
3650 Dilsen - Stokkem (BE)
Removal day : BY APPOINTMENT ONLY
Bekaertlaan, 30
3650 Dilsen - Stokkem (BE)
BY APPOINTMENT ONLY
Bekaertlaan, 30
3650 Dilsen - Stokkem (BE)
WWW.AUCTELIA.COM
The General Terms and Conditions and the Specific conditions of sale apply to this online Auction
SPECIFIC CONDITIONS - 1708. Vehicles, Containers, Cranes
START DATE 03 March 2020 as from 17:00
END DATE 17 March 2020 as from 18:50
VIEWING10 March 2020 from 10:00 to 12:00
Bekaertlaan, 30
3650 Dilsen - Stokkem (BE)
REMOVALBY APPOINTMENT ONLY
Bekaertlaan, 30
3650 Dilsen - Stokkem (BE)
BY APPOINTMENT ONLY
Bekaertlaan, 30
3650 Dilsen - Stokkem (BE)
In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows
on the removal day the proforma invoice and signs the delivery note.
WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots.
WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and
transport costs will be charged.
AUCTION FEES Auction Fees (based on Final Selling Price per Piece)- Amounts less than €15,000 17% of the final selling price
- Amounts more than €15,000 12% of the final selling price
VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees
PAYMENTWithin 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the
bank account below and mention the invoice number:
Auctelia
ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB
BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB
ORGANIZERAUCTELIA
Rue Emile Francqui 6/3 B-1435 Mont-Saint-Guibert, Belgique, 6
1435 Mont-Saint-Guibert (BE)
SUPERVISION This online Auction sale is held under the supervision of court Bailiffs Etude Bordet, 4031 Angleur-Liège.
EXTENSION OF
ONLINE AUCTION If there is at least one Bid within the last 5 minutes of a sale, the closing time is extended by 5 minutes until there is no more
Bid.
If no Bid has been placed on a Lot, then the closing time of the sale of this Lot is extended by 20 minutes.
ATTRIBUTION OF LOTS Within 48 hours of the closing of the Auction (Saturdays, Sundays and Belgian public holidays not included), the Candidate-
Buyer receives confirmation of purchase by e-mail on behalf of the Seller that the Sales contract has been materialised. If the
Candidate-Buyer has not received an e-mail of confirmation within this delay, this means that their Bid did not result in an
Attribution.
TERMS AND
CONDITIONSThe General Terms and Conditions and the Specific conditions apply to this online Auction, as you can find on the website
www.auctelia.com.
TO THE ATTENTION OF
THE CANDIDAT-
BUYER/BUYER
Lots are sold as they are, in the state they are in on the date of Attribution or of the Sales contract, with all the benefits and
burdens attached thereto. Auctelia SA and/or the Seller provide no guarantee relating to hidden or visible defects, nor does it
provide guarantees relating to the wholeness, quantities, the working and/or the usefulness. Defects of any nature
whatsoever, the disappointed expectations of the Buyer or third party buyers do not give right to compensations, damages
and/or settlement. Given that Lots can be viewed before the Sale or the Auction and that the Terms and Conditions are
known to the Buyer, the Buyer is deemed to have carefully examined the Lots, prior to purchase. The Buyer examines the
Lots at his own risk.
TRANSLATION In the case of a discrepancy between translations of these Specific conditions and the original French version of these
Specific conditions, the French version prevails.
Photos Description Start price
ID : 1708-001 Pinguely-Haulotte H25 TPX Telescopic boom liftMake : Pinguely-haulotte
Model : H25 TPX
Telescopic boom lift
Make: Pinguely-Haulotte
Model: H25 TPX
Year: 2001
Nominal Power: 38.8 kW
Maximum load capacity: 250 kg or 2 pers + 90 kg
Weight: 13850 kg
Hours: 2763 H
Maximum lifting height: 23.3 m
Overall dimensions: 255 cm x 1200 cm x 370 cm
Thermal Engine
Make: HATZ
Model: 3L41C
Power: 33.3 kW
Rolled: 2574 cm ³
Condition: Tested
Remark: Loading and removal to be borne by the buyer
5 500,00 €
ID : 1708-002 Mercedes Actros (2002-318423 km) Container truckMake : Mercedes
Model : Actros
Container truck
Make: Mercedes
Model: Actros
Mileage: 318423
1st registration date: 18/09/2002
Vin number: WDB9501431K511547
Motorization:
Gear box: Automatic
Suspension: Pneumatic
Number of seating: 2
Number of axles: 3
Tires Wear:
Maximum authoriezed mass: 26000 kg
Tare Weight: 11840 kg
Train Smass: 44000 kg
Total truck Dimensions: 850 cm x 255 cm x 340 cm
Documents:
-Registration certificate part I and II
-Certificate of conformity
-Certificate of Visit to the technical inspection (valid until 3/10/2020)
-Technical specifications sheet
-Identification report
Condition: Tested
7 500,00 €
Photos Description Start price
ID : 1708-003 EDER M805 Excavator on wheelsMake : EDER
Model : M805
Excavator on wheels
Make: EDER
Model: M805
Identification No.: 701395
Hours: 6373 H
Weight: 13300 kg
Year: 1998
Lifting capacity: 8000 kg
Overall dimensions: 355 cm x 420 cm x 350 cm
Condition: Tested
Remark: Included with sand grapple, rotating bin with a 250 cm leveling blade. Loading
and removal to be borne by the buyer.
1 500,00 €
Photos Description Start price
ID : 1708-004 Shredder for rigid plastics and wood installed on semi trailer Langendorf,
Caterpillar generatorMake : Langendorf
Model : SAT 10/12
Helical Knife mill for rigid plastics and wood
Voltage: 380 V three-phase
Power: 66 kW
Shredderr dimensions: 250 cm x 360 cm x 280 cm
Dimensions of disposer: 130 cm x 150 cm
Evacuation under the crusher on conveyor belt
Bagging conveyor belt
Carpet Length: 420 cm
Staircase included
Bagging Hopper in Big bin
Dimensions: 195 cm x 195 cm x 355 cm
Semi trailer tarped side and roof
Make: Langendorf
Model: SAT 10/12
Year: 1997
Vin number: WLASAT118VWF52186
MMA: 18000 kg
Number of axles: 1, Twin wheels
Trailer dDimensions: 250 cm x 1030 cm x 365 cm
Platform height: 80 cm
Document included
Generator
Make: Caterpillar
Model: GEPX150
Power: 150 kVA
Hours: 2891.4 H
Thermal Engine
Make: Perkins
Dimensions of the group: 110 cm x 330 cm x 195 cm
Overall dimensions: 350 cm x 1450 cm x 365 cm
Remark: Removal and dismantling to be borne by the purchaser, gear available on site
with maximum lifting capacity of 2250 kg
4 500,00 €
Photos Description Start price
ID : 1708-005 Pühler Helical Knife GrinderMake : Pühler
Helical Knife Shredder for PVC and Wood
Make: Pühler
Year: 1986
Voltage: 380 V three-phase
Grinder dimensions: 255 cm x 350 cm x 355 cm
Dimensions of disposer: 255 cm x 275 cm
Evacuation under the crusher on conveyor belt
Length: 760 cm
Total width: 150 cm
Height: 260 cm
Footbridge + Staircase
Dimensions: 270 cm x 375 cm x 345 cm
Condition: Not tested
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
4 500,00 €
ID : 1708-006 Shredder crusher, bucket conveyor, automatic bagging systemRefining Shredder
Shredder Dimensions: 150 cm x 180 cm x 340 cm
Dimensions of disposer: 75 cm x 40 cm
Evacuation under the grinder
Dimensions: 40 cm x 300 cm x 70 cm
Bucket conveyor
Transport Dimensions: 65 cm x 80 cm x 750
Automatic bagging system
Overall dimensions: 240 cm x 700 cm x 400 cm
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
4 500,00 €
ID : 1708-007 Guillotine, hydraulic group RexrothMake : Rexroth
Guillotine
Blade lengthe: 350 cm
Overall dimensions: 216 cm x 410 cm x 620 cm
Hydraulic Group
Make: Rexroth
Year: 1981
Hhydraulic oil capacity: 350 L
Hydraulic group dimensions + Table command:
100 cm x 120 cm x 190 cm
Condition: Not tested
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
900,00 €
Photos Description Start price
ID : 1708-008 Metal jibcrane, Demag chain hoistMake : Demag
Model : PK10N
Metal stem
Length between axles: 560 cm
Height: 830 cm
Chain hoist
Make: Demag
Model: PK10N
Year: 1984
Capacity: 1000 kg
Voltage: 220 V-380 V three-phase
Power: 2.3 kW
Length of Chains:?
Condition: Not tested
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
200,00 €
ID : 1708-009 Rubber conveyor, shredder with rotary screw outputRubber conveyor
Transport Dimensions:
1 x 850 cm x 100 cm x 85 cm
1 x 700 cm x 180 cm x 420 cm
Shredder dimensions: 220 cm x 450 cm x 375 cm
Engine Shredder
Voltage: 380 V three-phase
Power: 550 kW
Needle screw valve, waste washing system aftter the shredder
Voltage: 380 V three-phase
Power: 11kW
Length of wash screw: 250 cm
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
350,00 €
ID : 1708-010 PVC Waste Wash StationPVC Waste Wash Station
Composition
Dimensions 1st bin: 345 cm x 210 cm x 250 cm
Dimensions2nd bin : 410 cm x 210 cm x 250 cm
Condition: Not tested
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg, provide necessary to empty bins
250,00 €
Photos Description Start price
ID : 1708-011 Drying Tunnel, feed augerDrying Tunnel
Dimensions: 800 cm x 150 cm x 160 cm
Feed auger
Length: 440 cm
Condition: Not tested
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
250,00 €
ID : 1708-012 Cardboard/plastic press, conveyorMake : HB Persen
Model : HBC-50
Cardboard/plastic press
Make: HB Persen
Model: HBC-50
Serial Number: 907391.2
Voltage: 380 V three-phase
Power: 36 kW
Bale Dimensions: 105 cm x 90 cm x 140 cm
Press Dimensions: 940 cm x 280 cm
Height under conveyor belts: 415 cm
Condition: Not tested
Conveyor Belts
Dimensions of the funnel shredder: +/-165 cm x 190 cm x 200 cm
Dimensions slanting side: 1200 cm x 170 cm x 150 cm
Dimensions right side: 900 cm x 170 cm x 150 cm
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
450,00 €
ID : 1708-014 Matbro Telescopic LoaderMake : Matbro
Telescopic Loader
Make: Matbro
Load capacity: 2600 kg
Maximum lifting height: 700 cm
Overall dimensions: 230 cm x 540 cm x 235 cm
Condition: Not tested
Included fork positioner
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
2 900,00 €
Photos Description Start price
ID : 1708-015 Conveyor, crusher for polystyreneConveyor
Overall dimensions: 110 cm x 530 cm x 225 cm
Compression shredder for polystyrene
Voltage: 380 V three-phase
Dimensions: 150 cm x 660 cm x 245 cm
Bale outlet section: 40 cm x 40 cm
Condition: Not tested
Remark: Removal and dismantling to be borne by the purchaser. Gear available on site
with maximum lifting capacity of 2250 kg
250,00 €
ID : 1708-016 Shredder, buckets conveyor carpet, bagging systemShredder
Voltage: 380 V three-phase
Power: 18.5 kW
Overall dimensions: 145 cm x 300 cm x 230 cm
Hopper Dimensions at the base of the cone: 85 cm x 105 cm
Bucket conveyor
Dimensions: 75 cm x 350 cm x 60 cm
Bagging support
Dimensions: 100 cm x 160 cm x 330 cm
Container Dimensions: 240 cm x 640 cm x 450 cm
Remark: Removal, dismantling and load of the purchaser. Gear available on site with
maximum lifting capacity of 2250 kg
250,00 €
ID : 1708-017 Knife crusherKnife crusher
Overall dimensions: 104 cm x 250 cm x 190 cm
Hopper dimensions: 50 cm x 75 cm
Lot as on the pictures
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-018 Wifo THC200 Bin for ChargerMake : Wifo
Model : THC200
Bin for Charger
Make: Wifo
Model: THC200
Capacity: 665 L
Weight: 515 kg
Overall dimensions: 205 cm x 120 cm x 95 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
150,00 €
Photos Description Start price
ID : 1708-019 Forklift RotatorsForklift Rotators
Overall dimensions: 130 cm x 110 cm x 85 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
90,00 €
ID : 1708-020 Sand Bin for craneSand Bin for crane
Overall dimensions: 120 cm x 65 cm x 160 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
20,00 €
ID : 1708-021 Portotecnica Lion 8000MEII BrushMake : Portotecnica
Model : Lion 8000MEII
Scrubber
Make: Portotecnica
Model: Lion 8000MEII
Year: 1998
Voltage Batteries: 12 V-150 A
Power: 0.65 hP
Weight: 85 kg
Condition: Not tested
Included with Charger
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
30,00 €
ID : 1708-022 Forklift forks supportForklift forks support
Forks Length: 120 cm
Overall dimensions: 125 cm x 90 cm x 120 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
80,00 €
ID : 1708-023 Forks for telescopic forkliftForks for telescopic forklift
Forks Length: 120 cm
Forks for Bales
Overall dimensions: 175 cm x 65 cm x 125 cm
Length of teeth: 100 cm
Fork a tooth
Overall dimensions: 135 cm x 85 cm x 165 cm
Length of teeth: 145 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
Photos Description Start price
ID : 1708-024 30 Tires with and without rimsVarious tires with and without rims
Total Quantity: 30
Lot as on the pictures
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-025 Bale clamp for telescopic trolleyBale clamp for telescopic trolley
Overall dimensions: 110 cm x 80 cm x 150 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-026 Bin for forkliftBin for forklift
Overall dimensions: 135 cm x 170 cm x 145 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-027 Reznor Gas HeaterMake : Reznor
Gas heater
Make: Reznor
Dimensions: 137 cm x 80 cm x 92 cm
Blue leg dimensions: 125 cm x 110 cm x 103 cm
Support console for gas heater: 140 cm x 115 cm x 115 cm
Condition: Not tested
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
20,00 €
ID : 1708-028 Transportb bin with chains, lifting slings, shackles, tensionersTransport Bin with chains, lifting slings, shackles, tensioners
Bin dimensions: 125 cm x 85 cm x 98 cm
Lot as on the pictures
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
40,00 €
ID : 1708-029 Wire mesh containersWire mesh containers
Dimensions:
1 x 125 cm x 85 cm x 98 cm
1 x 151 cm x 104 cm x 92 cm
Contents: glasses, lights,...
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
40,00 €
Photos Description Start price
ID : 1708-030 Plastic buckets with lidPlastic buckets with lid
Lots on 8 pallets
Approximate Volume: +/-9 m³
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
10,00 €
ID : 1708-031 Cardboard Press, 2 containers for cardboardMake : Kiggen
Model : 1000.0
Cardboard Press
Make: Kiggen
Model: 1000
Voltage: 380 V three-phase
Power: 7.5 kW
Overall dimensions: 240 cm x 350 cm x 240 cm
Funnel dimensions: 180 cm x 160 cm x 120 cm
Condition: Not tested
Cardboard Containers
Quantity and dimensions:
1 x 250 cm x 660 cm x 260 cm
1 x 250 cm x 630 cm x 250 cm
Hook height: 140 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-032 Trailer for semi with tailgateMake : SEG
Model : SR334GS
Trailer for Semi
Make: SEG
Model: SR334GS
Vin number: VK1SR334DAP3W1207
Capacity (MMA): 38000 kg
Dimensions: 263 cm x 1390 cm x 375 cm
Included Documents:
-Certificate of conformity
-Registration certificate
Condition:
Tailgate
Make: Dhollandia
Model: DHSM2
Year: 1998
Capacity: 1500 kg
Shelf Length: 170 cm
Remark: Removal to be borne by the buyer, content not included
190,00 €
Photos Description Start price
ID : 1708-033 Cold boxCold box
Overall dimensions: 220 cm x 490 cm x 188 cm
Condition: Not tested
Remark: Removal to be borne by the buyer
20,00 €
ID : 1708-034 Hekamp Volumebak spécial 250 Bin Manitou LoaderMake : Hekamp
Model : Volumebak spécial 250
Bin for Manitou Loader
Make: Hekamp
Model: Volumebak Special 250
Volume: 1.9 m³
Year: 2005
Weight: 683 kg
Dimensions: 250 cm x 100 cm x 135 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-035 Bin for LoaderBin for loader
Dimensions: 230 cm x 90 cm x 85 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-036 Bin for loaderBin for loader
Dimensions: 230 cm x 150 cm x 100 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-037 Compressed air tank BrandtMake : Brandt
Compressed air tank
Make: Brandt
Year: 1985
Walking pressure: 10 bar
Capacity: 1000 L
Diameter: 75 cm
Total Height: 250 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
40,00 €
Photos Description Start price
ID : 1708-038 Metal TankMetal Tank
Diameter: 145 cm
Total Height: 335 cm
No visible plate
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
20,00 €
ID : 1708-039 Chip suction cycloneDepression Cyclone
Overall dimensions: 140 cm x 110 cm x 290 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
10,00 €
ID : 1708-040 Bin for loaderBin for loader
Dimensions: 200 cm x 120 cm x 85 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
40,00 €
ID : 1708-041 Ingersoll Rand P100W CompressorMake : Ingersoll Rand
Model : P100W
Compressor
Make: Ingersoll Rand
Model: P100W
Year: 1988
Hours: 1701 H
Pressure: 9 Bar
Overall dimensions: 130 cm x 280 cm x 125 cm
Condition: Not tested
Thermal Engine
Make: Deutz
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
250,00 €
ID : 1708-042 Galvanized waste containerGalvanized waste container
Quantity: 3
Overall dimensions: 130 cm x 98 cm x 140 cm
Condition: Oxidized
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
20,00 €
Photos Description Start price
ID : 1708-043 Platform for forkliftPlatform for forklift
Overall dimensions: 120 cm x 100 cm x 110 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
40,00 €
ID : 1708-044 Stackable plastic bins MECMake : Vem
Stackable plastic bins
Make: MEC
Quantity: 20
Dimensions One bin: 97 cm x 97 cm x 104 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
20,00 €
ID : 1708-045 PVC Pallets, wire mesh containers, plastic drumsPallets PVC, wire mesh containers, plastic drums
Dimensions: 80 cm x 120 cm, 100 cm x 120 cm
Approximate Volume: 40 m³
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
50,00 €
ID : 1708-046 Bales clampBales clamp
Transport Dimensions: 130 cm x 190 cm x 90 cm
Remark: Loading and removal to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
40,00 €
ID : 1708-047 Danckaert mortise and planerMake : Danckaert
Mortise and planer
Make: Danckaert
Voltage: 380 V three-phase
Power: 3.7 kW
Planing Width: 40 cm
Maximum thickness of planing: 22 cm
Overall dimensions: 170 cm x 140 cm x 115 cm
Condition: Untested, to be reconditioned, corner of table broke-chip present
Remarks: Removal and loading are to be borne by the buyer. Gear available on site with
maximum lifting capacity of 2250 kg
150,00 €
Photos Description Start price
ID : 1708-048 Weber Genesis Gas BarbecueMake : Weber
Model : Genesis
Gas Barbecue
Make: Weber
Model: Genesis
Overall dimensions: 150 cm x 70 cm x 120 cm
Condition: Not tested
Remarks: Removal and loading are to be borne by the buyer
10,00 €
ID : 1708-050 Column drilling machine REWER CF-16Make : Rewer
Model : CF-16
Column drilling machine
Make: REWER
Model: CF-16
Year: 1982
Voltage: 220 V single phase
Power: 0.5 kW
Total Dimensions: 37 cm x 70 cm x 105 cm
Conditions: Not tested
Remarks: removal and loading are to be borne by the buyer
20,00 €
ID : 1708-051 Column drilling machine BROWNMake : Brown
Column drilling machine
Make: BROWN
Voltage: 220 V
Power: 1.1 kW
Total Dimensions: 40 cm x 80 cm x 175 cm
Conditions: untested, oxidation present
Remarks: removal and loading are to be borne by the buyer
20,00 €
ID : 1708-052 Welding machine ERFI MIC2500Make : Erfi
Model : MIC2500
Welding machine
Make: ERFI
Model: MIC2500
Year:
Voltage: 380 V three-phase
Power: 9 kVA
Conditions: Untested, to be reconditioned
Remarks: included with sledge hammer, torch, manometer
Loading and removal to be borne by the buyer
20,00 €
Photos Description Start price
ID : 1708-053 Angle grinderAngle grinder
Voltage: 380 V three-phase
Dimensions: 64 cm x 40 cm x 110 cm
Diameter of Grinding wheels: 30 cm
Conditions: Not tested
Remark: Removal, dismantling and load loading of the purchaser
20,00 €
ID : 1708-054 Welding tableWelding table
Dimensions: 300 cm x 151 cm x 86 cm
Shelf Thickness: 0.8 cm
With 2 fixed metal vices
Weight estimated at 800 kg
Conditions: Oxidized
Remark: Loading and removal to be borne by the buyer. Content on the table is not
included in the lot
40,00 €
ID : 1708-055 AnvilAnvil on metal support
Square hole Size: 2.5 cm x 2.5 cm
Round hole Dimension: 1.5 cm diam
Length anvil: 65 cm
Total frame size included: 65 cm x 32 cm x 85 cm
Remark: Loading and removal to be borne by the buyer.
20,00 €
ID : 1708-056 Motorcycle-Fan, smoke chip extractor unit ELETTRO ASPIRATORE CB 25CMake : ELETTRO ASPIRATORE
Model : CB 25C
Motorcycle-Fan
Input Diameter: 30 cm
Output Diameter: 28 cm
Total size: 67 cm x 65 cm x 90 cm
Smoke Chip extractor unit
Make: ELETTRO ASPIRATORE
Model: CB 25C
Power: 0.75 Hp
Total size: 58 cm x 58 cm x 52 cm
Conditions not tested and to be reconditioned
Remark: Loading and removal to be borne by the buyer.
40,00 €
ID : 1708-057 Dust TunnelDust Tunnel
Total size: 230 cm x 137 cm x 142 cm
Diameter Tunnel: 95 cm
Cleaning frame Dimension: 0.6 cm x 2.1 cm
Remark: Loading and removal to be borne by the buyer.
20,00 €
Photos Description Start price
ID : 1708-058 Roller TabelsRoller Tabels
Dimensions: 110 cm x 120 cm x 100 cm
Usable width: 105 cm
Roll Length: 50 cm
Oxidized Conditions
Remark: Loading and removal to be borne by the buyer.
20,00 €
ID : 1708-059 Tarped Container with sorting carpetTarped Container with sorting carpet
Container Dimensions: 620 cm x 240 cm x 260 cm
Carpet Dimensions: 600 cm x 130 cm x 120 cm
Conditions: Not tested
Remark: Loading and removal to be borne by the buyer. The container is 180 cm high,
placed on framing.
150,00 €
ID : 1708-061 Office ContainerOffice Container
Dimensions: 307 cm x 210 cm x 253 cm
Conditions: used, 2 glass broke, to be repaired door, lot as pictured
Remark: Loading and removal to be borne by the buyer. Content not included.
50,00 €
ID : 1708-062 Plastic Hot Granulator ZHANGJIAGANG ZL160Make : ZHANGJIAGANG
Model : ZL160
Plastic Hot Granulator
Make: ZHANGJIAGANG
Model: ZL160
Year: 2007
Voltage: 380 V three-phase
Weight: 13850 kg
Input Dimensions: 80 cm x 53 cm
Dimensions of loading Mat: 66 cm x 420 cm x 240 cm
Overall dimensions: 500 cm x 240 cm x 260 cm
Conditions: Not tested
Remark: Removal, dismantling and load loading of the purchaser.
250,00 €
Photos Description Start price
ID : 1708-063 Trailer Single Axle ANCARMake : ANCAR
Single Axle Trailer
Make: ANCAR
Vin number: 75135
Year: 1995
First Date registered: 15/09/1977
Dimensions Tray: 244 cm x 160 cm x 30 cm
Overall dimensions: 400 cm x 160 cm x 93 cm
Included Documents:
-Certificate of conformity
-Registration certificate
Conditions: tires to replace
Remark: Loading and removal to be borne by the buyer. Content not included
50,00 €
ID : 1708-064 PVC POLI TraysMake : POLI
Transparent PVC Trays
Make: POLISHED
Dimensions Tray: 18.7 cm x 13.7 cm x 6.5 cm
Quantity by pallet: approx. 10000 PCs
Pallets Quantity: 15
Conditions new
Remark: Loading and removal to be borne by the buyer.
20,00 €
WHY SELL YOUR USED EQUIPMENT WITH AUCTELIA ?
QUALITY DEALS
Auctelia is deal-focused:95% of listed equipment have been sold. We only earn our fee if you make a sale.
BEST PRICE
Online auction is one of the best way to reach the market price.
You always win.
SHORT TIME
Online auction accelerates sales so you save time and stay focused
on your own business.
+31-85-4002222
+32-10-620660
www.auctelia.com/sell
Contact us!
References
95%
45.000+
of listed equipmenthave been sold
buyers & sellers
40 targetedcountries
+33-9-75-18-00-09