MEASURING

AND

LEVELING

TOOLS

2

F R O M B U I L D I N G

Earth moving, laying of floors, interior design and set up; all applications for our laser and optical levels to prove their accuracy, efficiency and easy to use.Stanley leveling tools are reliable, suitable for short and long range leveling inside and outside of a building. In most of application a single person is able to operate a device. Stanley leveling tools are easy to set up and use. Based on its experience and expertise in building Stanley prepared whole range of high quality leveling tools along with customer service organization and service at an optimal level.

LASER LEVELING

FEATURES

leveling - alignmentplumbing - alignment floor

to ceiling setting a right anglesetting an angles

and inclination

- preparation of building site- excavating for foundations- determination of foundations- civil engineering

- determination of inclination- landscape engineering- fencing alignment

- alignment horizontal and vertical- supports layout- making of a floor and ceiling

- masonry- angle measurement- carpentry

EXCAVATION - LEVELING CONSTRUCTION

1 2

FAST AND ACCURATE LEVELING

3

T O I N T E R I O R D E S I G N

- carpentry: doors, stairs- dry wall building

- plumbing, electrical installation, vents and heating

- air-conditioning

- laying tiles- covering floors- interior finishing- painting

- wall paper- decoration alignment- interior management

INTERIOR ARRANGEMENT FINISH

3 4

FEATURES

distance measuring surface calculation volume calculation height estimation

Accurate, efficient and user friendly laser distance meter DME allows you to save your time. Makes measuring at building site,interior and exterior, nice and easy.Simple to use Stanley DME tools guarantee high efficiency and productivity. Its accuracy and features make it ideal for preparingoffers, controlling and measuring of dimension of houses, apartments and other. It may be used for interior design, dry wall set up, electrical and plumbing works. Stanley DME distance meters are truly versatile measuring devices.

LASER MEASURING TOOLS

EASY TO MEASURE

4

PAGE 6 PAGE 7 PAGE 7

PAGE 10 PAGE 16

PAGE 8

LASER LEVELING AND MEASURING TOOLS:

EXCAVATION - LEVELING CONSTRUCTION

1 2

5

PAGE 10 PAGE 11

PAGE 12 PAGE 15 PAGE 14

PAGE 8 PAGE 9

PAGE 13 PAGE 13

PAGE 11 PAGE 12

PAGE 16

WHICH PRODUCT FOR WHICH APPLICATION?

INTERIOR ARRANGEMENT

3

FINISH

4

6

OPTICAL LEVEL

AL 24 DVPTechnical specification:

Leveling Accuracy: +/- 1,6 mm at 45 mRange: 90 mLeveling Type: magnetically damped pendulum self-leveling Use type: exterior, weather resistantEnlargement: x 24

No. 1-77-160

Leveling with use of level rod.

EXCAVATION - LEVELING

Self-leveling

In package:AL24 DVP, tripod adaptor,tripod aluminum 1,6 mplumb, telescopic level rod 4 m hard carrying case.

Self-leveling - guarantee accuracyWide angle of vision and small minimum range (0,3 m)Distance estimation (stadia 100)Robust design - weather resistant

7

SINGLE GRADE SELF LEVELING VISIBLE BEAM LASER

Self-leveling

RL 200GRTechnical specification:

Leveling Accuracy: +/- 1,6 mm at 30 mOperating Range: up to 200 m with laser detectorLeveling Type: motor assisted self leveling +/-5 degrees off gradeUse Type: exterior; job site tough IP54 waterproof,1 m dropLaser Diode: 635 nm, class II < 1 mWOperating temperatures: from -6°C to +49°CTime of operation: up to 25 hoursPower: NiCd batteries included

Inclination setting.

No. 1-77-158

EXCAVATION - LEVELING - CONSTRUCTION - INTERIOR ARRANGEMENT

Leveling.

Servo assisted self leveling - maximum accuracyand speed of useAnti-Drift Indicator - warns when unit is "off-Grade"One button per function - easy to useLED battery level indicator - protects from runningout of powerTotally enclosed rotating head - durability in extreme working conditions

In package:RL 200 GR , remote control unit -for single person operation, dual LCD remote receiver with extra laud grade tones,

surveyors style hard carrying case.

Level with use of leveling rod and laserdetector.

8

MOTOR ASSISTED SELF LEVELING ROTARY LASER

RL-300Technical specification:

Leveling Accuracy: +/- 1,6 mm at 30 mOperating Range: interior up to 90 mexterior up to 600 m with laser detectorLeveling Type: motor assisted self leveling +/-5 degrees off gradeUse Type: exterior and interior; job site toughIPX4 all weather standardLaser Diode: 635 nm, class II < 1 mWOperating temperatures: from -6°C to +49°CTime of operation: up to 25 hoursPower: NiCd batteries included

Servo assisted self leveling - maximumaccuracy and speed of useAnti-Drift Indicator - warns when unit is "off-Grade"One button per function - easy to useLED battery level indicator - protects from running out of powerVariable speed rotating head - for maximumvisibility in poor light conditionsSpot mode for 90 degree point - setscorners Totally enclosed rotating head - durability in extreme working conditions

No. 1-77-157

Oblique lines. Plumb and corner setting.

EXCAVATION - LEVELING - CONSTRUCTION - INTERIOR ARRANGEMENT

Self-leveling

Straight line setting.

In package:RL 300, remote control unit - for single person operation, laser targetand glasses - better laser light visibility,

wallmount unit - essential for suspended

ceilings, surveyors style hardcarrying case.

9

Interior leveling with use of wallmount. Plumb and corner setting.

RL-100Technical specification:

Leveling Accuracy: +/- 6 mm at 30 mOperating Range: interior up to 60 mexterior up to 250 m with Laser DetectorLeveling Type: manualVial sensitivity: level vial +/- 5’, vertical +/- 10’Use Type: exterior and interior; weather proofLaser Diode: 635 nm, class II < 1 mWOperating temperatures: from -6°C to +49°CTime of operation: up to 60 hoursPower: 4x Alkaline batteries included

One button per function - easy to useDual beam rotary head with point & shootsweep - avoids costly errors Variable speed rotating head - for maximumvisibility in poor light conditionsChalkline Mode for maximum operatingvisibility - short and long sweep optionSpot mode for 90 degree point - sets cornersLED battery level indicator - protects from running out of powerBuilt-in adjustable trivet - easy & quickleveling in both horizontal and verticalTwo precision vials - helps user set accurateand quick leveling Level setting.

No. 1-77-156

MANUAL ROTARY LASER LEVELING SYSTEM

INTERIOR ARRANGEMENT

In package:RL 100, remote control unit - for single person operation, laser targetand glasses - better laser light visibility,

wallmount unit - essential for suspended

ceiling, surveyors style hard carryingcase.

10

No. 1-77-154

5 BEAM SELF - LEVELING LASER LINE LEVEL

CONSTRUCTION - INTERIOR ARRANGEMENT

SP-5Technical specification:

Leveling Accuracy: +/- 6 mm at 30 mRange: up to 30 mSelf Leveling tolerance: +/- 5 degreesLeveling Type: magnetically damped pendulumself levelingUse Type: interior level and plumb applicationsLaser Diode: 650 nm, class 2 < 1 mWPower: 3 X AA alkaline batteries included

5 Independent self leveling chalk lines -rapid and accurate layout of many applications& maximum beam visibilityMagnetically dampened self levelingmechanism - rapid and accurate self levelingAutomatic "Out-of-Level" detection - avoidscostly errorsTough rubber housing - Job-Site tough

In package:SP-5, universal mount and moun-ting strap - for tripod and vertical set up,

plumb trivet - for accurate set up of interior

walls, laser target - for better day light beam

visibility, supplied with nylon carrycase, supplied with 3 AA alkalinebatteries.

Self-leveling

Setting of a plumb according to floorreference point.

Use of a magnetic mount.

Simultaneous setting of a plumb, level andright angle.

CL-90Technical specification:

Leveling Accuracy: +/- 3 mm at 9 mLine Accuracy: 2 mm at 3 mSelf Leveling tolerance: +/- 5 degreesLeveling Type: magnetically damped pendulumself levelingUse Type: interior level and plumb applicationsLaser Diode: 650 nm, Class 2 < 1 mWPower: 3 X AA alkaline batteries included

TWIN BEAM, SELF LEVELING, CROSS BEAMINTERIOR LASER LEVELING SYSTEM

In package:CL-90, adjustable mountingpole - also available as an option,

supplied with nylon carry case,supplied with 3 AA alkalinebatteries.

Heavy duty, magnetically dampened self levelingmechanism - rapid and accurate self leveling with Job-SitedurabilityAutomatic "Out-of-Level" detection - avoids costly errorsTwin lasers provide two constant beam styles simultaneouslythrough the two windowsMain Laser Window has 3 modes - vertical, horizontal or cross beam - maximum brightness and accuracySecondary Laser window - single vertical beam set at 90degrees to main windowAdjustable mounting pole - 2.5 m fully extended/mountingbracket included/rubber feet for maximum security in use

No. 1-77-155

INTERIOR ARRANGEMENT - FINISH

2,50

m

Setting level for assembly job.

Perpendicular lines.

Leveling.

Self-leveling

11

12

CL-2Technical specification:

Leveling accuracy: +/- 4 mm at 9 mLine accuracy: 2 mm at 3 mSelf leveling tolerance: +/- 5 degreesLeveling Type: magnetically damped pendulumself levelingUse Type: interior applications, tiling and interiorwallsLaser Diode: 650 nm, class 2 < 1 mWPower: 3 X AA alkaline batteries included

SELF - LEVELING LASER CROSS LINE

WITH 4 OPERATING MODES

No. 1-77-153

INTERIOR ARRANGEMENT - FINISH

In package:CL-2, Nylon carry case,3 AA alkaline batteries.

Plumb setting. Level setting. Perpendicular lines (right angle).

Self-leveling

One button mode selector - easy to usePendulum type self levelling - accuracy and durability4 different operating modes -horizontal/vertical/laser cross/tilt mode (Manual Lock)Tough rubber housing - comfort & site toughruggedness

13

TORPEDO DOT LASER

SP-2Technical specification:

Leveling Accuracy: +/- 6 mm at 15 mRange: up to 30 mLeveling Type: manual - base leveling screw & swing out feetUse Type: interior applicationsLaser Diode: 650 nm, Class 2 < 1 mWPower: 3 X AA alkaline batteries included

SP-1Technical specification:

Leveling Accuracy: +/- 6 mm at 15 mRange: up to 30 mLeveling Type: manual - base leveling screw & swing out feetUse Type: interior applicationsLaser Diode: 650 nm, class 2 < 1 mWPower: 3 X AA alkaline batteries included

No. 0-77-152

No. 0-77-151

Right angle setting. Oblique lines.

FINISH

Rotary base - rapid & accurate set up of level and right anglesFixing pins - secure fixing to wallsBase levelling screw - precision levellingSwing out levelling feet - precision levellingPlumb vial - for accurate vertical levellingPrecision vial - precision levellingMagnetic base - secure clamping to metal stud and pipe workBeam spreader - generates laser chalk lineBattery case - simple battery change (batteries included)5/8" x 11 thread mount - fits to camera tripod

Level setting. Plumb setting.Base levelling screw - precision levellingSwing out levelling feet - precision levellingPlumb vial - for accurate vertical levellingPrecision vial - precision levellingMagnetic Base - secure clamping to metal studand pipe workBeam spreader - generates laser chalk lineMetal laser lens ring - easy to fit and change lensBattery case - simple battery change

(batteries included)5/8" x 11 thread mount - fits to camera tripod

No. 0-77-260

IntelliLaser

PROTechnical specification:

Leveling Accuracy: +/- 1 mm/mRange: up to 10 mLaser Diode: 635 - 650 nm, class 2 < 1 mWDetection depth: up to 19 mmDetects: wood, metal, hot electrical wiresDetection accuracy: +/- 3mm (wood), +/- 6 mm (metal)Power: 9V battery

Single device that shows properplace for drill and helps decoraterooms.

TWO IN ONELASER LEVEL

AND STUD DETECTOR

IN ONE CONVENIENT

BODY

180 degrees pivoting laser plane with leveland plumb vials.

LASER LEVELS

14

No. 0-77-009

FatMaxTechnical specification:

Leveling Accuracy: +/- 6 mm at 30 mRange: up to 30 mUse Type: interior applicationsLaser Diode: 635 - 650 nm, Class 2 < 1 mWPower: 2 X AA alkaline batteries included

PLUS

Technical specification:

Body: made of aluminum with magnetic base3 vials: horizontal, vertical, 0-180 degrees, 1/4”thread mountLeveling Accuracy: +/- 6 mm at 30 mRange: up to 30 mDot or cross laser beam projection

No. 0-77-012

FINISH

15

No. 0-77-250

IntelliSensor

DigiScanTechnical specification:

Detection depth: up to 38 mm Detects: wood, metal, hot electrical wiresDetection accuracy: +/- 3 mm Read-out: visible and audible signalsPower: 9V battery

IntelliSensorTechnical specification:

Detection depth: up to 19 mm Detects: wood, metal in dry wallsDetection accuracy: +/- 3 mm Read-out: visible and audible signalsPower: 9V battery

Easy to read LCD displayOne button operation - easy to useDeep Read featureDetects hot electrical wires

1

2

3

STUD FINDERS

FINISH

No. 0-77-110

Diodes signaling stud centreOne button operation - easy to use

Back-light LCD display - easy reading in dim lightTimer - for measures in hard to reach places

LASER DISTANCE METER

DME-50Technical specification:

Accuracy: +/- 3 mmRange: 0,2 to 200 mUse Type: interior and exterior, weather proofLaser Diode: 620 - 690 nm, class 2 < 1 mWPower: 2 X AA alkaline batteries included

No continuous measure nor hight estimation (available in DME-100).

No. 1-77-013

No. 1-77-017

CONSTRUCTION - INTERIOR ARRANGEMENT - FINISH

Perimeter calculation.Distance measure, surface and volume calculation.

Perimeter calculation.Continuous measurement(min. and max.).

Height estimation (2- and 3- point).

Distance measure, surface andvolume calculation.

DME-100Technical specification:

Accuracy: +/- 3 mmRange: 0,2 to 200 mUse Type: interior and exterior, weather proofLaser Diode: 620 - 690 nm, class 2 < 1 mWPower: 2 X AA alkaline batteries included

Back-light LCD display - easy reading in dim lightMultipurpose base plate - for stabilizing device during measurementTimer - for measures in hard to reach places

16

DISTANCE METERS

17

IntelliMeasure Technical specification:

Accuracy: +/- 0,5 %Range: 0,6 to 15 mMeasurement time: 2 - 6 sec.Features: distance, surface, volumeMemory functionRead-out: metric, imperialPower: 9V battery, battery indicator

CONSTRUCTION - INTERIOR ARRANGEMENT - FINISH

Perimeter calculation.Distance measuring, surface and volumecalculation.

LCD display - easy work in dim lightRobust design - for building site use

No. 0-77-007

No. 1-77-174

No. 1-77-175No. 1-77-176

MW40MTechnical specification:

Wheel diameter: 318 mmResolution: 1 dm (0,1 m)Range: 10000 m

MW20MTechnical specification:

Wheel diameter: 98 mmResolution: 1 cmRange: 1000 m

ODOMETERS

NEW!DMW30

Technical specification:

Wheel diameter: 254 mmResolution: 1 cmRange: 10000 mPower: 3 x AAA batteryFeatures: units convertion (metric-imperial),memory (8 measurements)

18

No. 0-77-166splitter

No. 0-77-167spreader

No. 1-77-169

INCLINATION ADAPTOR- Inclination from 0-90 degrees- To be mounted on tripods with 5/8” thread mount

No. 1-77-168

TELESCOPIC LEVEL ROD- Telescopic level rod made of aluminum- 5 m in 5 sections- Easy readout; centimeters on one, millimeters on other side

No. 1-77-161

TRIPOD ADAPTOR- Allows easy leveling adjustment- Fits on tripods with 5/8” and 1/4”- Can be used for tabletop application

No. 1-77-165

TRIPOD- Made of aluminum- Double column (1-77-164)- Fast and effective "quick clamps" system- Height range from 1,02 m to 1,60 m (with column up to 2,92 m)- Carrying strap- 5/8” thread mount

No. 1-77-164with column

No. 1-77-163standard

LASER BEAM SPLITTER/SPREADER- For Torpedo Laser levels- Beam spreader supplied with 2 vials

LASER LCD REMOTE RECEIVER - Visible and invisible rotating laser beam leveling- Dual LCD display with laud grade tones- 7 level display- Universal mount- Range 300 m

LASER TARGET- Increase visibility of laser beam- 100 x 70 mm

No. 1-77-170

ACCESORIES FOR LASER LEVELS

19

ACCESORIES FOR LASER LEVELS

No. 1-77-177for RL 100

No. 1-77-178for RL200/300

LEVEL ROD CARRY BAG- For AR51 level rod No. 1-77-173

RECHARGEABLE BATTERY PACK- For RL 200/300 No. 1-77-179

BATTERY CHARGER- 220V- For rechargeable battery pack

No. 1-77-180

ADJUSTABLE MOUNTING POLE- 4 solid sections, 1 telescopic- 2.5 m fully extended- Mounting bracket included with 5/8” thread mount - Rubber feet for maximum security in use- For: CL90, RL100, SP5, CL2

No. 1-77-184

WALLMOUNT- For RL 100/300 - Composite based design- 5/8” thread mount- Horizontal position with additional 5/8” thread mount

No. 1-77-172

ADJUSTABLE BASE- For SP5- For drywall construction- 2 knobs for precise adjustment

No. 1-77-185

REMOTE CONTROL FOR RL SERIES- For single person operation

GLASSES- For better laser beam visibility No. 1-77-171

© THE STANLEY WORKS

Stanley Sales and Marketing Poland Sp. z o.o.ul. Modliƒska 190, 03-119 Warszawa

tel.: +48 22 510 36 55, 57, 58; faks: +48 22 510 36 56e-mail: stanley@stanley.com.pl; http://www.stanley.com.pl

©Stanley Europe 2004

available at: