32AV93G 32/40LV93G 26/32EL93G 32/40HL93G...

32AV93*G32/40LV93*G26/32EL93*G32/40HL93*G

DIGITALSeries

2

Engli

sh ContentsSafety Precautions ................... 5

Installation and important information ................................ 6

Where to install.................................... 6When using a Wall Bracket ................. 6

The Remote Control ................. 8

Inserting batteries and effective range of the remote ....................................... 8

Connecting External Equipment ................................. 9

REGZA-LINK Connections ....... 11

Connecting an HDMI or DVI device to the HDMI input .......... 12

To connect an HDMI device ................ 12To connect a DVI device...................... 14

Connecting a Computer ........... 16

To connect a PC to the HDMI terminal................................................ 16Acceptable Video signals through HDMI terminals .................................... 18Acceptable PC signals through HDMI terminals .............................................. 18

Using the Controls ................... 19

Switching On ....................................... 20Using the Remote Control ................... 20Using the Side-Key Controls ............... 20

Tuning the Television ............... 21

First Time Using .................................. 21

Setting the Channels ................ 23

Auto Tuning ......................................... 23

Manual Tuning ..................................... 24Automatic Power Down ....................... 26Reset TV ............................................. 26

DTV Settings ............................. 27

Channels ............................................. 27Channel Options.................................. 28Subtitle and Audio ............................... 29Password............................................. 29Parental ............................................... 29Standby Channel Update .................... 29Common Interface ............................... 30Favorite Control ................................... 30Favorite Program................................. 30Channel Grouping ............................... 31

Digital On-Screen Information and Programme Guide ............. 32

Information .......................................... 32On-Screen Information Icons .............. 32Guide ................................................... 32

General Controls ...................... 33

Selecting Channels ............................. 33Stereo and Bilingual Transmissions .... 33Quick Access Menu ............................. 33Subtitles............................................... 33Picture Still .......................................... 33Input Selection..................................... 33

Sound Controls ......................... 34

Volume Controls and Mute Sound....... 34Dual ..................................................... 34Bass, Treble and Balance ................... 34Stable Sound ....................................... 34Surround Sound .................................. 34Bass Boost .......................................... 34Dynamic Range Control ...................... 34

3

English

Digital Audio Output............................. 35Audio Description ................................ 35

Widescreen Viewing ................. 36

Available Picture Size and Position Control ................................................. 37

Picture Controls ........................ 38

Picture Position ................................... 38Picture Mode ....................................... 38Picture Preferences ............................. 38Black/White Level ................................ 39Cinema Mode ...................................... 39Colour Temperature ............................. 39Static Gamma...................................... 39Reset ................................................... 39Active Backlight Control ...................... 393D Colour Management ...................... 39Base Colour Adjustment ...................... 40Digital Noise Reduction ....................... 40MPEG NR – Noise Reduction ............. 40

Enjoy Photos through USB Port .................................... 41

View Photo Files .................................. 41Using Slide Show ................................ 42Repeat Settings for Slideshow ............ 42Set Interval Time ................................. 42Using the Play List............................... 42Background Music ............................... 42Photo Info ............................................ 43

Enjoy Music through USB Port .................................... 44

Play Music Files .................................. 44Repeat Settings ................................... 45Using the Play List............................... 45Music Info ............................................ 45

Enjoy Videos through USB Port .................................... 46

Play Video Files ................................... 47Repeat Settings ................................... 48Set ...................................................... 48Using the Play List............................... 48Slow Forward ...................................... 48Step Forward ....................................... 48Video Info ............................................ 48Aspect Ratio ........................................ 48Picture Mode ....................................... 48Goto Time ............................................ 49

REGZA-LINK Controls .............. 50

Equipment Control............................... 50Select REGZA-LINK Device ................ 50

REGZA-LINK Menus ................. 51

One Touch Play ................................... 51System Standby .................................. 51System Audio Control .......................... 51Enable REGZA-LINK........................... 51Auto Power On .................................... 52Auto Standby ....................................... 52�� .................................. 52Speaker Preference ............................ 52REGZA-LINK Playback Device Control ................................................. 53

Preference Controls ................. 54

On Timer .............................................. 54Sleep Timer ......................................... 54EPG ..................................................... 55Panel Lock........................................... 56Auto Format (Widescreen) .................. 564:3 Stretch ........................................... 56Blue Screen ......................................... 56Side Panel ........................................... 56

4

Engli

sh DivX Registration................................. 57DivX Deregistration ............................. 57System Information ............................. 57System Upgrade.................................. 57

Text Services and Text Information ................................ 58

Setting the Modes ............................... 58Navigating Pages using Auto .............. 58Navigating Pages using LIST .............. 58Control Buttons.................................... 58

PC Settings ............................... 59

Horizontal and Vertical Position........... 59Horizontal Width .................................. 59Clock Phase ........................................ 59Reset ................................................... 59

Input Selection and AV Connections .............................. 60

Lip Sync Mode .................................... 60Input Signal Selection.......................... 60

Frequently Asked Questions ... 61

�� Accessories .............................. 63

License Information ................. 65

5

EnglishSafety PrecautionsThis equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured.Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.The Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.

Air CirculationLeave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.

Heat DamageDamage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.

Mains SupplyThe mains supply required for this equipment is 220-240v AC 50Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead.DO NOT cut off the mains plug from this equip-ment, this incorporates a special Radio Interfer-ence Filter, the removal of which will impair its �� is approved by ASTA or BSI to BS1362.It should only be replaced by a correctly rated and �� IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.

DoDO read the operating instructions before you at-tempt to use the equipment.DO ensure that all electrical connections (including the mains plug, extension leads and inter-connec-tions between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.DO be careful with glass panels on equipment.WARNING: To prevent injury, this apparatus must ��!"�� -ance with the installation instructions. See page 6.

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.THE MAINS PLUG IS USED AS A DISCON-NECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Do NotDO NOT obstruct the ventilation openings of the equipment with items such as newspapers, table-cloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.DO NOT allow electrical equipment to be exposed �� #��"��$��such as vases, to be placed on the equipment.DO NOT��#�� %��sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt ��

WARNING: To prevent the spread of ��%�� away from this product at all times.

DO NOT��%�� &'*'+�;legs with wood screws. To ensure complete safety, ��"�� <�� %��"��;� �� to the instructions.DO NOT leave equipment switched on when it �� it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities.DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.WARNING – excessive sound pressure from ear-phones or headphones can cause hearing loss.ABOVE ALL – NEVER let anyone, especially chil-dren, push or hit the screen, push anything into holes, slots or any other openings in the case.These actions will damage screen or internal parts.NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.

6

Engli

sh Installation and important informationWhere to install

Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.Place the TV set on a stable, level surface that can support the weight of the TV. As an additional safety measure you secure the TV to the level surface or a wall, as shown in the illustration, using sturdy strap.Otherwise secure the TV on the level surface using the mounting screw.The LCD display panels are manufactured using an extremely high level of precision technology, how-ever sometimes some parts of the screen may be

1 2 3 4 5

Sturdy tie (as short as possible)

Stand clip Screw(not supplied)

Fixing strap Fixing strap

= The screw type is dependent on the actual mounting surface. The metric thread size is 3.8-4.1mm.

= Place the stand on a stable, level surface and secure the TV set by using a single screw (not supplied) through the fall prevention screw hole.

= >�%��?*�� $��%surface.

*Stand style is dependent on modelmissing picture elements or have luminous spots. This is not a sign of a malfunction.Make sure the television is located in a position it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack over time from the combi-nation effects of chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious injury and/or permanent damaged to TV and TV pedestal.

Cleaning the screen and cabinet...Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

When using a Wall BracketPlease use a wall bracket appropriate for the size and weight of the LCD TV.= Two people are required for installation.= To install a wall-mount from another manufacturer.1. Unplug and remove any cables and/or other component connectors from the rear of the TV.2. �� " � �� $�� %��3. Follow the instructions provided with your wall bracket. Before proceeding, make sure the appro-

priate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

4. Always use the screws supplied or recommended by the wall mount manufacturer.

Removing the Pedestal Stand:1. Carefully lay the front of the unit face down on

�� "�� over the edge.

32AV93*G | 32/40LV93*G x 4 26EL93*G x 3 32EL93*G x 4 |

32/40HL93*G x 4

2. Remove the screws.3. After the screws are removed, hold the pedestal

stand in place, then remove it from the TV by sliding away from the bottom of the TV.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid dam-age to the LCD panel.

9~10mm

10mm

J[\]��

metal washer Panhead Screw: advised Roundhead / Ovalhead Screw:

a washer is required Flathead screw: cannot be used

7

EnglishPlease take noteEXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:i) ��îi) ��$��%�îii) �� îv) � �� ^v) �� ^vi) �� !��"�� ^

vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the in-�� " �<�� ^

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when �� "��$�� ^

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or �� "� �� recorded data whether caused during normal operation or misuse of the product.= The digital reception function of this television is only effective in the countries listed in the Country

section of the SETUP menu. Depending on country/area, some of this television’s functions may not be ��+�� "��

= �� _`{��;�� displays, video games, on-screen menus, etc. are left on the television-screen for any length of time they could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.

= Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manu-facturers warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent retention.

NOTE: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV.

SYMBOL SYMBOL DEFINITIONDANGEROUS VOLTAGE:?�� "��"��"�� equilateral triangle is intended to alert the user to the presence of un-insulated }��&�'+��*�J?��'�"�� <�� magnitude to constitute a risk of electric shock to persons.INSTRUCTIONS: The exclamation point within on equilateral triangle to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.

WARNING:?�� %�� "��from this product at all times.

8

Engli

sh

12 In TV mode: Display on-screen information In Text mode: Access the index page

13 Mute the sound14 Display the QUICK access menu15 Exit the menu system16 Display EPG17 Go to the previous level of the menu18 Display the on-screen menu19 >� � �� `��`

In Text mode: Change the page ��

20 Colour button: Text control buttons Reveal concealed text Hold a wanted page Enlarge text display size

Select a page while viewing a normal picture

1 Toggle between TV ON or Standby2 Toggle between external input sources3 Still Picture4 To display the teletext screen5 TEXT subtitle pages if available6 Stereo/Bilingual transmissions7 Number buttons8 Audio Description9 Switch between ATV and DTV10 Change the volume11 Change the channel

The Remote ControlSimple at-a-glance reference of your remote control.

Inserting batteries and effective range of the remote

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove dead bat-teries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 66 of this manual. Warning: batteries must not be exposed to excessive heat such as sunlight ��The performance of the remote control will �� or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing.

9

EnglishConnecting External EquipmentBefore connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

HDMI 1 INPUTSOCKET

RGB/ PC

POWER CORD

*a decoder could

be Digital Satellite or any other compatible decoder.*Model will determine power code position.

HDMI 2 INPUTSOCKET

USB SOCKET

For 32AV93*G | 32/40LV93*G

HDMI 1 INPUTSOCKET

RGB/ PC

POWER CORD

*a decoder could

be Digital Satellite or any other compatible decoder.*Model will determine power code position.

HDMI 2 INPUTSOCKET

USB SOCKET

For 26/32EL93*G | 32/40HL93*G

10

Engli

sh

Aerial cables: - - - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television.

If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television.

SCART cables: - - - -- - - - - - - - - - - - - - -

Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC. socket.

Before running Auto Tuning put your decoder and media recorder to Standby.HDMI®�� >�� "��*��$�� "�� "��]�]�� video signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also support VGA, SVGA, XGA, WXGA and SXGA.NOTE: Although this television is able to connect to HDMI equipment it is possible that some equip-

ment may not operate correctly.A wide variety of external equipment can be connected to the back of the television, there-fore the relevant owners manuals for all additional equipment must be referred to.If the television automatically switches over to monitor external equipment, return to normal televi-sion by pressing the desired channel button. To recall external equipment, press to select.

11

EnglishREGZA-LINK ConnectionsThe basic functions of connected audio/video equipment can be controlled using the television’s remote control if a REGZA-LINK compatible device is connected.

The back of your television

AV amplifier

HDMI out

Playback equipment

HDMI outHDMI in

Playback equipmentHDMI out

For 32AV93*G | 32/40LV93*G

The back of your television

AV amplifier

HDMI out

Playback equipment

HDMI outHDMI in

Playback equipmentHDMI out

For 26/32EL93*G | 32/40HL93*G

12

Engli

sh Connecting an HDMI or DVI device to the HDMI inputThe HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-rial in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 18.NOTE:

= Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard.

= Supported Audio format: Linear PCM and Dolby Digital, sampling rate 32/44.1/48kHz.

To connect an HDMI deviceConnect an HDMI cable (type A connector) from the device to the HDMI terminal.For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ®).= If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates

greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.

= HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).

HDMIcableHDMI device

HDMI out(not supplied)

For 32AV93*G | 32/40LV93*G

13

English

HDMIcableHDMI device

HDMI out(not supplied)

For 26/32EL93*G | 32/40HL93*G

To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.

14

Engli

sh

To connect a DVI deviceConnect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1.= The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m).= An HDMI-to-DVI adapter cable transfers video only.= Separate analogue audio connection are not supported for audio receivers.

DVI device

HDMI-to-DVI adapter cable(not supplied)

For 32AV93*G | 32/40LV93*G

15

English

DVI device


For 26/32EL93*G | 32/40HL93*G

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:= �� >��

DVI device.= �� >��*��

television.[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, �� !"��!"�#�� !�� "�� $�� $��!"�#��##%��&��'� ��

16

Engli

sh Connecting a ComputerWith either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television.

To connect a PC to the HDMI terminalWhen connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable.If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate ana-logue cable is not necessary.

the back of your television


2

Computer

For 32AV93*G | 32/40LV93*G

17

English

the back of your television


2

Computer

For 26/32EL93*G | 32/40HL93*G

For acceptable PC and video signal formats, see page 18.NOTE:

= The edges of the images may be hidden.= If connecting a certain PC model with a unique PC signal, the PC signal may not be

detected correctly.

18

Engli

sh Acceptable Video signals through HDMI terminals

Resolution H. Frequency (KHz) V. Frequency (Hz)480i 15.734 60.000

480p 31.500 60.000

576i 15.625 50.000

576p 31.250 50.000

720p 37.500 50.000

720p 45.000 60.000

1080i 28.125 50.000

1080i 33.750 60.000

1080p 27.000 24.000

1080p 28.125 25.000

1080p 33.750 30.000

1080p 56.250 50.000

1080p 67.500 60.000

Acceptable PC signals through HDMI terminals

Resolution H (KHz) V(Hz) Pixel Clock (MHz) H-Polarity V-Polarity H-Total V-Total

640 x 480 31.369 59.940 25.175 Negative Negative 800 525



800 x 600 35.160 56.250 36.000 Positive Positive 1024 625






1280 x 768 47.776 59.870 79.500 Negative Positive 1664 798





19

EnglishUsing the ControlsWhile all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

HDMI 2 INPUTSOCKET

Common Interface

USB

Headphone

Power

Up / down(Volume or channel)

Programme / Volume / Source

RED LED − StandbyGREEN LED − Power on

GREEN LED − On Timer

IR SENSOR

For 32AV93*G | 32/40LV93*G

HDMI 2 INPUTSOCKET

Common Interface

USB

Headphone

Power

Up / down(Volume or channel)

Programme / Volume / Source

RED LED − StandbyGREEN LED − Power on

GREEN LED − On Timer

IR SENSOR

For 26/32EL93*G | 32/40HL93*G

20

Engli

sh

Switching OnIf the RED Stand By LED is unlit, check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments.

To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear.For energy saving:We recommend that you use the television with the factory settings. The factory settings are for energy saving.Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday.+�� "�� ' �� -sumption and thus saves money by reducing electricity bills.NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw

some power.

Using the Remote ControlTo set up the television you will now need to use the on screen menus. Press MENU on the remote control to see the menus.?�� on the navigation ring on the remote control.To use the options, press �� ?�� move up and down through the menu and use to select the required choice. Follow the on-screen instructions. The functions of each menu are described in detail throughout this manual.

Using the Side-Key ControlsPress to adjust volume.Press to change programme selection, then press to adjust programme selection.Press and hold until Source List is displayed, then press to scroll through the list until desired input source is located.

(� �� )�� *��

NOTE: Inserting the headphone plug will mute the sound from all speakers.

21

English

Before switching on the television put your decoder and media recorder to Standby if they are con-nected. To set up the television use the buttons on the remote control as detailed on page 8.

Tuning the Television

First Time Using�� and press the button.The Language menu will appear.

Language

Select EnterOK

EnglishEspañolNederlandsNorskslovenščinaČeskýбългapcкиHrvatski

DeutschPortuguêsDanskPolskiSlovenskyRomânăEλληvıκάУкраїнське

FrançaisItalianoSvenskaSuomiMagyarPyccкийSrpskiTürkçe

NOTE: This function is accessed in the SETUP � Quick Setup menu.

��language (English, Français, Deutsch, Español, Italiano, Português, Neder-lands, Svenska, Dansk, Norsk, Suomi, ��%�� >�� %��%��+�� ¡¢£¤��%��'¥¥¦�§¨©��%��?ª%«��¬�¯±²³´�µ��

Press to enter Quick Setup menu.

��Country and �� -try (Austria, Belgium, Bulgaria, Croatia, Czech, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, Netherlands, Norway, Others, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, UK or Ukraine).

Quick SetupCountryDigital Subtitle LanguageDigital Subtitle Language 2ndAudio LanguageAudio Language 2nd

GermanyGermanTurkishGermanTurkish

Select Tuner ModeOK

��Digital Subtitle Language� �� select your preferred language.

��Digital Subtitle Language 2nd� �� to select your preferred language.

��Audio Lan-guage� �� your preferred language.

��Audio Lan-guage 2nd� �� select your preferred language.

Press to select Tuner Mode.NOTE: ?��

the Quick Setup menu.

Tuner Mode

BackRETURNSelect LocationOK

Antenna

��Antenna or Cable.

22

Engli

sh

Press to select Location.

Location

Store

To use the TV for the display in a store showroom,please select [Store].[Home] mode is recommended for normal use.

BackRETURNSelect Auto tuningOK

��Home or Store. For normal home use, select Home.

When Store�� -tion window appears.

Location

NO

BackRETURNSelect Auto tuningOK

You have selected [Store].This mode consumes more energy.Are you sure you want to set to this mode?

��YES or NO.

Press to enter the Auto tuning menu.

NOTE: Please make sure the aerial is connected to the TV before tuning.

Previous settings will be lost !Press EXIT for no change.

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

BackRETURNEdit

��Tuning Mode � �� ATV, DTV or ATV and DTV.��Start Scan and press .

Auto tuning

ATVDTV

StopEXIT

Progress 1 % 0 %Channel: C3 Station:

Found00

The search will begin for all available stations. The slide bar will move along the line as the search progresses.You must allow the television to complete the search.When the search is complete the television will automatically select channel 1. This may not be a clear picture or the signal may be weak, so the station order can be changed using ATV/DTV Manual Tuning in the SETUP menu.

23

English

Setting the ChannelsNOTE: When Parental Block is activated, the 4-digit password is needed.

Auto TuningThe Auto tuning function will completely re-tune the television and can be used to update the channel list.NOTE: It is recommended that Auto tuning is

run periodically to ensure that all new services are added.

NOTE: All the current channels and settings, for example, the locked channels, will be lost.

Tuner Mode - AntennaPress MENU��SETUP and press to enter the submenu.

PICTURE SOUND SETUP APPLICATIONS PREFERENCES

��Auto tuning, and press to enter the submenu.

EnterOK BackRETURN

1/2SETUPLanguageCountryTuner ModeAuto tuningATV Manual TuningDTV Manual TuningDTV SettingsAV connectionPicture PositionQuick Setup

EnglishGermanyAntenna

OK

OK

OK

OK

OK

��Tuning Mode � ��ATV, DTV or ATV and DTV.

Auto tuning

Tuning Mode

Start Scan

ATV and DTV

OK

Previous settings will be lost !Press EXIT for no change.

BackRETURNEdit

��Start Scan and press to start Auto Tuning.

Auto tuning

ATVDTV

StopEXIT

Progress 2 % 0 %Channel: C4 Station:

Found00

Tuner Mode - CableSwitching between tuner modes will change the features available on your television. All the current channels and settings, for ex-ample, the locked channels, will be lost.In the SETUP�� Tuner Mode and press .��YES or NO.

Tuner Mode

NO

This may change the features available on yourTV. Continue?

BackRETURNEdit EnterOK

Press MENU��SETUP and press to enter the submenu.

��Auto tuning, and press to enter the submenu.

EnterOK BackRETURN


EnglishGermany

Cable

OK

OK

OK

OK

24

Engli

sh ��Tuning Mode � ��ATV, DTV or ATV and DTV.

Auto tuning

Tuning ModeStart ScanOperator SelectionScan TypeStart Frequency (MHz)End FrequencyModulationSymbol RateNetwork ID

ATV and DTV

Quick ScanAutoAutoAutoAutoAuto

OK

BackRETURNEdit

Previous settings will be lost! Press EXIT for no change.

��Operator Selec-tion�� Others, Ziggo or UPC.

NOTE: Operator Selection can only be adjusted when Country is Netherlands.

��Scan Type, and ��Full Scan or Quick Scan.NOTE: Channels with a weak signal may

be missed by Quick Scan.

��Operator Selec-tion, Scan Type, Start Frequency (MHz), End Frequency, Modulation, Symbol Rate or Network ID, and use ��%�� the information or select Auto for tuning.

��Start Scan and press to start tuning.

NOTE: = The information should be

given by your cable provider.= Network ID is only available

for Quick Scan.

Manual TuningThere are two TV modes: ATV and DTV that can be tuned-in manually using Manual Tun-ing.

ATV mode - Antenna/CablePress MENU��SETUP and press to enter the submenu.

��ATV Manual Tuning and press to enter the sub-menu.

EnterOK BackRETURN



OK

OK

OK

OK

OK

��position you want to arrange and then ��

ATV Manual TuningPosition

123456

ChannelC1C2C3C4C5C6

Station−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

BackRETURNSort EnterOK

��your preferred position. As you do so the other stations will move to make room.��

ATV Manual TuningPosition

123456

ChannelC2C1C3C4C5C6

Station−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

BackRETURNStore

25

EnglishDTV mode - AntennaPress MENU��SETUP and press to enter the submenu.

��DTV Manual Tuning and press to enter the sub-menu.

EnterOK BackRETURN



OK

OK

OK

OK

��RF Channel and �� key pad on the remote to enter a channel.

DTV Manual Tuning

OK

RF Channel

Start Scan

5

Signal StrengthQuality

Weak Average Strong

Poor

BackRETURNEditInput0−9


Press to display the breakdown �� shown below.

ATV Manual TuningManual fine tuning

1 BG P C 69 0 − − − − −

BackRETURNSelect Change SaveOK

A B C D E F G H I

A Position:The number to be pressed on the remote control.

B System:��

C Colour system:Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

D Skip: means nothing has been stored or

the facility to skip the channel is On.

E Signal Class:?��

F Channel:The channel number on which a station is being broadcast.

G Searching:Search up and down for a signal.

H �� ?� � ��;�� ?� ��;�� function.

I Station:�� characters.

Press to save.

26

Engli

sh DTV mode - CablePress MENU��SETUP and press to enter the sub-menu.

��DTV Manual Tuning and press to enter the sub-menu.

EnterOK BackRETURN


EnglishGermany

Cable

OK

OK

OK

OK

��Frequency, Modulation or Symbol Rate, and use ��%�� the information or select Auto for tuning.

DTV Manual Tuning

OK

FrequencyModulationSymbol RateStart Scan

113.000 MHzQAM 16

4000 KS/s

Signal StrengthQuality

Weak Average Strong

Poor

BackRETURNEditInput0−9


Automatic Power DownThe TV will automatically turn itself off (standby) within 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel. It will also automatically turn off if no input signal is detected after ap-proximately 15 minutes.

In the SETUP�� select Automatic Power Down.

Press �� to select Off, 4h, 6h or 8h.

BackRETURN

2/2SETUP

OK

OK

OK

Edit

Automatic Power DownLocationSoftware UpgradeSystem InformationReset TV

OffHome

Reset TVSelecting Reset TV will reset all TV settings to their original factory values.

In the SETUP�� select Reset TV and press .

��YES�� or select NO to exit and press .

Reset TV

NO

Previous settings will be lost ! Press EXIT for no change.

BackRETURNSelect EnterOK

27

EnglishDTV SettingsChannels

The channel order may be changed to suit your personal preference.NOTE: This function is only available in DTV

mode.



��DTV Settings and press to enter the submenu.

��Channels and press .

DTV SettingsChannelsChannel Options Subtitle and AudioPasswordParentalLocal Time SettingStandby Channel UpdateFavorite ControlFavorite ProgramFavorite NetworkChannel GroupingCommon Interface

22:17OffOn

On

OK

OK

OK

OK

OK

OK

EnterOK BackRETURN

OK

��Channels.

Channels TV

BackRETURNRe−number Skip

Position803804805806807273

NameRossia 1Rossia 24NTVTRK 5 kamalBibigonService Information Radio Three

SortOK

Re-numberPress the button on the remote to renumber the highlighted channel.

Edit the channel number using the num-ber keys on the remote and press .

Channels

BackRETURN

Position

804805806807273


EnterOK

8 − − −

Input0−9

TV

SkipPress the button on the remote. A

icon appears.

Channels TV

BackRETURNRe−number SkipSortOK

Position803804805806807273


28

Engli

sh ��%��( ) box.

Channel Options


TVCH800

NameDEEJAY TV

Press to select. A tick appears in the box.

NOTE: Skipped channels cannot be selected by P or P but still be accessed by direct entry (when tuned a icon will be displayed in the banner to indicate as a skipped channel).

Parental ControlLocking channels stops the viewing of digital channels, and they can only be accessed by entering the password.

In the DTV Settings�� Channel Options, and press to enter the submenu.

��%( ) box.

Press to select. A tick appears in the box.If the password has already been set, password entry will be required to set the locked channels.

Channel Options


TVCH800

NameDEEJAY TV

From this point on, when any of the channels in the Channel Options list are selected, the password must be entered before they can be accessed.

Sort��channel and then press . A tick icon appears.

Channels TVPosition

803804805806807273


BackRETURNStoreOK

�� wish to swap with the one selected in Step 8 and then press .The positions of the two channels are swapped.

Channels TVPosition

804803805806807273


BackRETURNStoreOK

Channel OptionsThis function is to setup the Skip or Lock for currently watched channel.Skip ChannelsThe feature allows you to set channel that will be skipped when P or P are used to tune.

In the DTV Settings�� Channel Options, and press

to enter the submenu.


22:17OffOn

On

OK

OK

OK

OK

OK

OK

EnterOK BackRETURN

OK

29

English

Enter a new 4-digit password, and re-enter the new password again to ��

PasswordNew PasswordConfirm Password

NOTE: ”0000” cannot be used.

ParentalThis function blocks channels or programmes that you do not want to or that you do not want your children to watch.A password is required to access this function.The factory default password is “0000”.NOTE: When Parental Control is activated,

you will need to enter the 4-digit password before you enter the DTV Settings submenu under the SETUP menu. After auto tuning, all the channel blocks will be cleared.

In the DTV Settings�� Parental, and press to enter the submenu.

Enter the 4-digit password.

�� age 4~18 or select None to turn this function off or Block All.

NOTE: This function is available for pro-grammes with Age Rating information.

Standby Channel UpdateIf the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed and any new chan-nels are saved.

In the DTV Settings�� Standby Channel.

��On or Off.

Subtitle and AudioYou can choose the Subtitle Type or Audio Type from Normal or Hearing Impaired. If the Hearing Impaired is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions.Subtitle Language or Audio Language allow ��"��"��of soundtrack language, provided they are cur-rently being broadcast.

In the DTV Settings�� Subtitle And Audio, and press to enter the submenu.

��Subtitle Display � ��On or Off.��Subtitle Type or Audio Type� ��Normal or Hearing Impaired.

��Digital Subtitle Language, Digital Subtitle Language 2nd, Audio Language or Audio Lan-guage 2nd� ��your preferred language.

PasswordChange the 4-digit parental control password.The factory default password is “0000”.

In the DTV Settings�� Password, and press to enter the submenu.


22:17OffOn

On

OK

OK

OK

OK

OK

OK

EnterOK BackRETURN

OK

30

Engli

sh

Common InterfaceThe Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider.

Insert the CAM and card into the Com-mon Interface Slot, following the instruc-tions provided with the CAM. A box will �� CAM has been inserted.

In the DTV Settings menu, ��Common Interface, and press to enter the submenu.

Details of the CAM should now be avail-able.

NOTE: The software updating of CI Plus CAM may be automatically executed. At this time, any Recording/Reminder pro-gramme timer will be cancelled.

Favorite ControlThis function is used to disable or enable the favorite channel list.

In the DTV Settings�� Favorite Control.

��On or Off.


22:17OffOn

On

OK

OK

OK

OK

OK

OK

OK

BackRETURNEdit

When Favorite Control is On, the favorite channel list appears when press-ing .

Favorite List

800 Maori Television

Favorite ProgramThe favorite channel list supports maximum 9 favorite channels.

In the DTV Settings�� Favorite Program, and press to enter the submenu.


22:17OffOn

On

OK

OK

OK

OK

OK

OK

EnterOK BackRETURN

OK

NOTE: Favorite Network function is only available for Norwegian models.

31

EnglishChannel GroupingThere are Video, Radio and Text services combined in a channel list for DTV services, The function provides the selection of channel change with one service group or among all services by pressing P and P .

In the DTV Settings�� Channel Grouping.

��On or Off.


22:17OffOn

On

OK

OK

OK

OK

OK

OK

OK

BackRETURNEdit

When Channel Grouping is On, the channel change by P and P will be within a single service group, press ATV/DTV on the remote control can be still used for change services among ATV, DTV Video, DTV Radio and DTV Text.

��channel and press to edit.NOTE: Press the button on the re-

mote to delete the channel.

Favorite List

BackRETURNDelete


EditOK

��Service Type, � �� (TV),

(Radio) or (TEXT).

Favorite List

BackRETURNSaveOK

Favorite Program

Service TypeChannel

800


ChangeSelect

��Channel, and ��channel.

Press to save the settings.

NOTE: ?�� delete the desired channel.

32

Engli

sh Digital On-Screen Information and Programme GuideWhen viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels.

GuideSelect the on-screen guide by pressing GUIDE. The guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.

�� programmes scheduled for the channel selected.

For details of other programmes cur-� �� up and down the channel list.

NOTE: In order for the recording operation to work properly, the media recorder must be set to the same time as the TV. Regarding the process for recording, please refer to the owner’s manual of the recording equipment.

InformationPress , and the information screen will appear giving details of the channel and programme currently being viewed.

1 BBC Parliament

Westminster HallPrime Minister's Questions

Recorded coverage of questions in the House of Commons to PrimeMinister Gordon Brown from Wednesday 26 November.

07:00 − 11:3011:30 − 12:00

News/Current.. 72 Minutes Left

10:18 Sun, 30 Nov

ExitEXITChange

��Now or Next information guide.

On-Screen Information IconsIcons will appear on the Information screen giving details about the programmes being broadcast. Details of these icons are listed below:

Icon Description

Service info

Service type (TV, Radio, TEXT)

Skip

Audio info

Mono

StereoDual mono

Multichannel

Dolby DigitalDolby Digital+

Audio/ Subtitle info Hearing Impaired

Event info

HD, SD Video format (HD, SD)

16:9, 4:3 Video AspectTeletext

Subtitle

(Single, Multi)Multi-audio track

AD Audio Description4 - 18 Parental rating

Encrypted

33

English

Selecting ChannelsTo select a channel use the numbered buttons on the remote control.Channels can also be selected using P and P .

Stereo and Bilingual TransmissionsIf stereo or dual language broadcasts are transmitted the word Stereo or Dual will ap-pear on the screen each time channels are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear.Stereo: Press to select Stereo or Mono.Bilingual: If a bilingual programme is offered, the word Dual will display on screen. To change between languages, press to switch between Dual 1 and Dual 2.

Quick Access MenuQuick access helps you access some options quickly such as Picture Size, Picture Mode, Media Player, Sleep timer, System Informa-tion and REGZA-LINK. Press the QUICK button to display the Quick access menu and �� "��%�to change.

Quick accessPicture SizePicture ModeMedia PlayerSleep TimerSystem InformationREGZA−LINK

WideStandard

00:00OK

OK

NOTE: Quick access items are different depending on the current mode.

SubtitlesIf Subtitles are available for your current pro-gramme, pressing the SUBTITLE button will toggle Subtitles on or off.

Picture StillThis feature is used to hold a still image on the screen. Press to hold an image on the screen, press again to cancel.

Input SelectionUse the Input Selection feature if the televi-sion does not switch over automatically when using an external device.

Pressing , a list will appear on-screen show-ing all external equipment. �� to select.

TV 1 2 3CHDMI1HDMI2MEDIAPC

Inputs

HDMI® displays equipment connected to Input HDMI on the back of the television. It is de-signed for best performance with 1080i/1080p ��

General ControlsThe General Controls will allow you to select channels and information, use the sound controls, per-sonalise the picture style, and select external equipment.

34

Engli

sh Sound Controls

Volume Controls and Mute SoundVolumePress or to adjust the volume.

Sound MutePress on the remote once to turn the sound off and again to cancel.

Dual�� "��a soundtrack in more than one language, the DUAL feature allows selection between them.

Press MENU��SOUND and press to enter the submenu.


��Dual, and press ��"�� Dual1 or Dual2.

SOUND

OKOK

DualBassTrebleBalanceBass BoostSurround SoundStable SoundDynamic Range ControlDigital Audio OutputAudio Description

Dual10004

OffOffOn

BackRETURNEnterOK

Bass, Treble and BalanceThe sound controls are accessible in digital and analogue modes.


��Bass, Treble or Balance� �� the setting.

Stable SoundThe Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a com-mercial.


��Stable Sound, � ��On or Off.

Surround SoundSurround Sound enhances depth of the sound.


��Surround Sound�� On or Off.

Bass BoostBass Boost enhances depth of the sound.


��Bass Boost, � ��

Dynamic Range ControlThis feature allows control of audio compres-sion for some digital TV programmes (MPEG-1 and MPEG-2 audio programmes are not sup-ported).


��Dynamic Range Control�� On or Off.

35

EnglishDigital Audio OutputPress MENU��SOUND and press to enter the submenu.

��Digital Audio Output and press to enter the sub-menu.

��Audio Format, � ��PCM or Auto.

Digital Audio OutputAudio FormatAudio DelayAudio Delay Time (ms)

PCMAuto

0

BackRETURNEdit

��Audio Delay, � ��Auto or Manual. ��Audio Delay Time (ms)�� the setting.

NOTE: Audio Delay Time (ms) is only available when Audio Delay is Manual.

Audio DescriptionAudio Description is an additional narration describing on-screen action, body language, expressions and movements for people with visual disabilities while watching the TV. This function enables you to choose the type of narrations.


��Audio Descrip-tion and press to enter the submenu.

��Audio Descrip-tion�� On or Off.

Audio DescriptionAudio DescriptionMixing Level

On80

Edit BackRETURN

��Mixing Level, � �� NOTE: Mixing Level can only be ad-

justed when Au dio Description is On.

NOTE: Press the AD button on the remote control to switch the Audio Descrip-tion On or Off.

36

Engli

sh

Subtitle

Wide (Expect PC)

Use this setting when watching a widescreen DVD, widescreen video tape

or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible

on the top and bottom of the screen.

Wide (PC only)This setting will show the picture without

over scan and side panel when watching a PC signal source via HDMI

or PC terminal.

4:3 Use this setting to view a true 4:3 broadcast.

Super Live

This setting will enlarge a 4:3 image to ��

horizontally and vertically, holding better proportions at the centre of the image.

Some distortion may occur.

Cinema

�� "�� ;��! video tapes, this setting will eliminate or

reduce the black bars at the top and bottom of the screen by zooming in and selecting

the image without distortion.

SubtitleWhen subtitles are included on a letterbox

format broadcast, this setting will raise the picture to ensure that all the text is

displayed.

14:9 Use this setting when watching a 14:9 broadcast.

Native

When using a PC connected via HDMI this setting will show the picture without over

scan, i.e. WYSIWYG. This option is only available when

watching video signal source via HDMI.

Widescreen ViewingDepending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.

37

English

Press QUICK to display the Quick access �� Picture Size, � ��

Quick accessPicture SizePicture ModeMedia PlayerSleep TimerSystem InformationREGZA−LINK

WideStandard

00:00OK

OK

You can choose the picture size from Wide, 4:3, Super Live, Cinema, Subtitle, 14:9, Native, Normal or Dot by Dot.Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.

Available Picture Size and Position Control

Wide 4:3 Super Live Cinema Subtitle 14:9 Native Normal Dot by

DotATV o o o o o o x x x

DTVSD o o o o o o x x x

HD o o o o x o o x x

Scart o o o o o o x x x

CVBS o o o o o o x x x

YPbPrSD o o o o o o x x x

HD o o o o x x x x x

HDMISD o o o o o o o x x

HD o o o o x x o x x

D-SUB o x x x x x x o o

DVI o x x x x x x o o

Normal

This setting will show the picture without over scan, i.e. WYSIWYG.

This option is only available when watching a PC signal source via HDMI

or PC terminal.

Dot by Dot

“Dot by Dot” is a non-scaling display. Depending on the input signal format, the setting will display the picture with side panels and/or bars at the top and

bottom (i.e VGA input source).

38

Engli

sh

Picture PositionThe Picture Position may now be adjusted to suit personal preference.

Press MENU��SETUP and press to enter the sub-menu.


��Picture Position and press to enter the submenu.

EnterOK BackRETURN



OK

OK

OK

OK

OK

�� "� ��#�� adjust the settings as required.

Picture PositionHorizontal positionVertical positionReset

00

Edit BackRETURN

OK

Picture ModeYou can adjust the picture appearance by se-lecting the preset value in picture mode based on the programme category.

Press MENU��PICTURE and press to enter the submenu.


��Picture Settings and press to enter the submenu.

Picture Settings

OK

Picture ModeActive Backlight ControlBack LightContrastBrightnessColourTintSharpnessBlack/White LevelCinema ModeColour TemperatureStatic GammaReset

StandardHigh70955050050

MiddleOn

Medium0

Edit BackRETURN

��Picture Mode � ��Dynamic, Standard, Mild, Movie, Game or User.NOTE: Game is not available for the TV

input mode.

Picture PreferencesYou can customise current picture mode set-tings while selecting User.

In the Picture Settings�� Back Light, Contrast, Brightness, Colour, Tint, Sharpness.

��

Picture ControlsMost of the picture controls and functions are available in both digital and analogue modes.NOTE: Features not available will be greyed out.

39

EnglishBlack/White LevelThis function increases the strength of dark areas of the picture, which improves picture ��

In the Picture Settings�� Black/White Level.��#��Off, Low, Middle or High. The effect depends on the broadcast and is most noticeable on dark colours.

Cinema Mode��<�� \_��-ond, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the Cinema Mode.

In the Picture Settings�� Cinema Mode.

��On or Off.

Colour TemperatureColour Temperature increases the ‘warmth’ or “coolness” of a picture by increasing the red or blue tint.

In the Picture Settings�� Colour Temperature and ��

��Colour Tem-perature� ��Medium, Warm or Cool to suit your preference.

Colour TemperatureColour TemperatureRed LevelBlue LevelGreen Level

Medium000

��Red Level, Blue Level or Green Level� ��to adjust the settings as required.

Static GammaThe static gamma feature allows you to adjust the levels of black in the picture.

In the Picture Settings�� Static Gamma.

�� Static Gamma (-5~+5).

ResetThis feature resets all picture settings to the factory settings.In the Picture Settings�� to select Reset and press to reset settings.NOTE: If any picture settings have not been

changed, Reset is not available.

Active Backlight ControlWhen the Active Backlight Control feature is activated, High mode will control the backlight-ing levels depending on various scenes such as picture motion, bright scene or dark scene. Low mode will control the backlighting level on dark scene.

In the Picture Settings menu, press ��Active Backlight Control.��Off, Low or High.

3D Colour ManagementWhen 3D Colour Management is set to On, it allows the Base Colour Adjustment feature to become available.You can adjust the picture colour quality by se-lecting from 6 base colour adjustments : Red, Green, Blue, Yellow, Magenta or Cyan.

In the PICTURE�� select 3D Colour Management.

��On or Off.

NOTE: When a DVD movie with subtitle is playing back, this mode may not work correctly.

40

Engli

sh

Base Colour AdjustmentThe Base Colour Adjustment feature allows the adjustment of individual colours to suit per-sonal preference. This can be useful when using an external source. It only can be adjusted when 3D Colour Management is set to On.

In the PICTURE�� to select Base Colour Adjustment and press to enter the submenu.

�� "� �to adjust and press .

Base Colour AdjustmentBrightnessHue Saturation

RedGreenBlueYellowMagentaCyanReset

000000

000000

000000

OK

EditOK BackRETURN

��Hue, Saturation or Brightness.

Base Colour AdjustmentBrightnessHue Saturation

0 Red

��#�� required.

NOTE: In the PC Input mode, this function is not available.

Digital Noise ReductionDNR (Digital Noise Reduction) enables you to “soften” the screen representation of a weak signal to reduce the noise effect.

In the PICTURE�� select DNR.

��Off, Low, Mid-dle or High.

NOTE: This function is not available for HDMI input.

MPEG NR – Noise ReductionWhen watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated.Using the MPEG NR feature reduces this ef-fect by smoothing out the edges.

In the PICTURE�� select MPEG NR.

��Off, Low, Mid-dle or High.

41

English

View Photo FilesInsert a USB storage device and press

on the remote.��MEDIA and press

.


Inputs

Enjoy Photos through USB Port?��*��"��"��%��·��

Image Photo Resolution(Mstat suggest)

Required DRAM size(Mbytes) Remark

JPEGBase-line 15360x8704

(1920x8x1088x8) 3.96 Depends on RAM size

Progressive 1024x768 6.00

PNGnon-interface 9600x6400 3.66

interface 1200x800 3.66

BMP 9600x6400 3.66

NOTE: = Resolution is a reference design, limited only by DRAM (Dynamic Random Access Memory)

size and performance= The larger the resolution, the more memory required= The smaller the resolution, the less performance required (decrease the time required to

display a picture)= A JPEG decoder is a hardware decoder, with a max resolution of 15360 x 8704= A PNG/BMP decoder is a software decoder (running on a co-processor), with a max resolu-

tion that depends on DRAM size

��Photo and press to enter the submenu.

USB 2.0

Photo Music Movie

Move SelectOK

��you wish to view and press to enter.Press P or P to page up or down.

Move SelectOK

USB:\Return

PageP

1 \ 1

BackRETURN

42

Engli

sh ��-sired photo and press to view.

Press MENU to change the settings when viewing a photo.

788 X 1157

00001 / 00004

0000−1.jpg

Off

On

15 sec

−−−−/−−/−− −−:−−

Previous

Move SelectOK BackRETURN

0

��`= : Go to the previous photo= : Go to the next photo= : Select slide show mode= : Select repeat mode= : Select the desired interval time= : Clockwise rotation 90°= : Counterclockwise rotation 90°= : Show play list= : Set the background music= : Photo information

and press ��

Using Slide ShowThis view allows you to watch a slide show of the photos. In this view mode, the only content that locates on the same directory shall be played.


�� and press to turn On or Off.

NOTE: Slide show stops at the last photo in the directory.

Repeat Settings for SlideshowPress MENU to change the settings when viewing a photo.

�� and press to turn On or Off.

Set Interval TimePress MENU to change the settings when viewing a photo.

�� and press to select the desired interval time

(3/5/10/15/30/60/90 Sec).

NOTE: If Repeat is On, slide show starts ��"� ��

Using the Play ListPress MENU to change the settings when viewing a photo.

�� and press .

�� press to show the photo.Press RETURN on the remote to col-lapse the list.

788 X 1157

00001 / 00004

0000−1.jpg

Off

On

15 sec

−−−−/−−/−− −−:−−

Play List


0

PageP

0000−1.jpg0000−2.jpg0000−3.jpg0000−4.jpg

0000−1.jpgj g

1 / 1

Background MusicSet the background music when viewing photo.


�� and press .

788 X 1157

00001 / 00004

0000−1.jpg

Off

On

15 sec

−−−−/−−/−− −−:−−

Background Music


0

43

English�� and press .


Play List

Background Music

0

�� to play music.

Press RETURN on the remote to col-lapse the list.

USB:\ 1 \ 1

Move SelectOKPageP BackRETURN

Return

Music

Photo

Video

�� and press to select One or Folder.

Photo InfoInfo�� -tent number, photo title, shooting date and time, resolution etc.).


�� and press .

00001 / 000040000−1.jpg

Off

On

15 sec

−−−−/−−/−− −−:−− 788 X 1157 Info.

0000−1.jpg

Resolution:Size:Date:Time:

788 X1157323 KBytes−−−− / −− / −−−− : −− : −−

EXITEXIT

The information will be removed by time-out (about 15 sec) or press to exit.

44

Engli

sh Enjoy Music through USB Port?��>�{��"��%��·��

Audio Codec File Extension Bit Rate Remark

MPEG1 Layer2 MP3 32Kbps~ 448Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate)

MPEG1 Layer3 MP3 32Kbps ~ 320Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate)

Play Music FilesInsert a USB storage device and press


.


Inputs

��Music and press to enter the submenu.

USB 2.0

Photo Music Movie

Move SelectOK

��wish to play and press to enter.Press P or P to page up or down.

USB:\ 1 \ 1


Return

Music

Photo

Video

��music and press to play.

00001 / 00003001.MP3

00:00:02 / 00:02:42 16

Folder

Pause

Play


�� `= / : Play or pause the selected

music= : Rewind the selected music= : Fast forward the selected music= : Go to the previous music= : Go to the next music= : Stop play= : Select the desired repeat

interval: - Repeat Off - Repeat One: Repeat the selected

music once - Repeat Folder: Repeat all music

�� = : Show play list= : Music information

and press ��

45

EnglishRepeat Settings

�� .

Press to select Off, One or Folder.

Using the Play List

�� and press .

�� to play music.

Press EXIT on the remote to collapse the list.

00001 / 00003001.MP3

00:00:02 / 00:02:42 16

Folder

Play List

Pause001.MP3002.MP3003.MP3

001.MP3

1 / 1

Move SelectOK BackRETURNPageP

Music InfoInfo�� number, music title, Bit Rate, Artist, Sampling, Year, and size).

�� and press .

00001 / 00003001.MP3

00:00:02 / 00:02:42 16

Folder

Info


001.MP3

Album:Title:Bit Rate:Artist:Sampling:Year:Size:

Music01

320KSinger44K2010

6366 KBytes


46

Engli

sh Enjoy Videos through USB Port?��*��*��"��"��%��·��

File Extension Container Video Codec SPEC Bit Rate

(Mbit/sec) �� Remark

dat, mpg, mpeg MPEG

MPEG1MPEG2

1080P@ 30fps 20 >�'�\`>�� ºHigh Level

MP4: GMC is not supported

»��may not be played.

ts, trp, tpMPEG2-TSH.264-TS

H.264MPEG2

1080P@ 30fps 20

��\¼_`>�� ºJ��_�]>�'�\`>�� ºHigh Level

vob MPEG2-PS MPEG2 1080P@ 30fps 20 >�'�\`>�� ºHigh Level

mp4, m4v MP4H.264MPEG4

1080P@ 30fps 20

��\¼_`>�� ºJ��_�]>�'�_`��and Advanced Simple ��ºJ��½

mkv MKV

H.264MPEG1MPEG2MPEG4

1080P@ 30fps 20

�\¼_`>�� ºJ��_�]>�'�\`>�� ºHigh Level>�'�_`��and Advanced Simple ��ºJ��½

divx, divAVI(1.0, 2.0)

DMF0,1,2

DivX 3.11DivX 4.12DivX 5.xDivX 6

1080P@ 30fps 20>�'�_`��and Advanced Simple ��

avi

AVI(1.0, 2.0)DMF0,1,2

H.264MPEG1MPEG2MPEG4DivX 3.11DivX 4.12DivX 5.xDivX 6

1080P@ 30fps 20

��\¼_`>�� ºJ��_�]>�'�\`>�� º��>�'�_`��and Advanced Simple ��ºJ��½

AVI(1.0, 2.0) MJPG (Motion JPEG) 640x480@ 30fps 10

�� H.264Sorenson H.263

1080P@ 30fps 20 ��\¼_`>�� ºJ��_�]

47

English

Press MENU to change the settings when viewing a video.

00001 / 00001001.avi

00:00:08 / 00:02:28 16

Standard

16:9

Folder

Pause

Play


��`= / : Play or pause the selected

video

= : Fast back the selected video

= : Fast forward the selected video

= : Go to the previous video

= : Go to the next video

= : Stop play

= : Select the desired repeat interval: - Repeat Off - Repeat One: Repeat the selected

video once - Repeat Folder: Repeat all video

��

= : Repeat from A to B - Set A: A-Set

Repeat and Start - Set B: B-Set

Repeat and repeat from A to B

= : Show play list

= : Video information

= : Slow forward the selected video

= : Step forward the selected video

= : Aspect Ratio

= : Picture Mode

= : Allows you to input a search time

and press ��

Play Video FilesInsert a USB storage device and press


.


Inputs

��Movie and press to enter the submenu.

USB 2.0

Photo Music Movie

Move SelectOK

��wish to view and press to enter.Press P or P to page up or down.

USB:\ 1 \ 1


Return

Music

Photo

Video

��and press to play.

48

Engli

sh

Step ForwardThe feature allows you to view a video one frame at a time.


�� and press to play step by step.

Video InfoInfo�� number, video title, audio track, subtitle, pro-gram, size, etc.).


�� and press .

00001 / 00001001.avi

00:00:08 / 00:02:28 16

Standard

16:9

Folder

Info

Play

Move Select BackRETURN

001.aviResolution:AudioTrack:Subtitle:Program:Size:

320 x 2141 / 1−− / 0−− / 0

1862 KBytes

Close


Aspect RatioPress MENU to change the settings when viewing a video.

�� and press to select Native, 4:3 or 16:9.

Picture ModePress MENU to change the settings when viewing a video.

�� and press to select Standard, Mild, Movie or

Dynamic.

Repeat SettingsPress MENU to change the settings when viewing a video.

�� and press to select Off, One or Folder.

Set Press MENU to change the settings when viewing a video.

�� and press to select Set A, Set B or None.

Using the Play ListPress MENU to change the settings when viewing a video.

�� and press .

�� press to play the video.Press RETURN on the remote to col-lapse the list.

00001 / 00001001.avi

00:00:08 / 00:02:28 16

Standard

16:9

Folder

Play List

Play

1 / 1

001.avi

Move SelectOK BackRETURNPageP

Slow ForwardThe feature changes forward speeds.


�� and press to select SF2X, SF4X, SF8X, SF16X or Play.

49

EnglishGoto TimeThe feature allows you to view a selected time during the video.


�� and press .

Use the number key pad on the remote to enter time. Press to go to the input time.

00001 / 00001001.avi

00:00:08 / 00:02:28 16

Standard

16:9

Folder

Goto Time

Play


Input search time:

0 0 : 0 0 : 0 0

OK

50

Engli

sh

Equipment ControlThe REGZA-LINK mode on the television’s remote control allows the control of connected REGZA-LINK equipment being watched.To control the REGZA-LINK� ��select the equipment with REGZA-LINK input source selection, then switch the mode on the remote control to REGZA-LINK and press any buttons.The available functions are dependent on the equipment connected. Not all the remote con-trol keys may be available. Please refer to the operation manual for each piece of equipment connected.NOTE: The television features that can be con-

trolled by the connected equipment are: Standby, Volume and Sound Mute.

REGZA-LINK ControlsThis feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba REGZA-LINK compatible equipment from the television’s remote control.NOTE: Not all Toshiba products currently support REGZA-LINK.

Select REGZA-LINK DevicePress . A list appears on screen showing modes and all stored external equipment.

The REGZA-LINK icon appears auto-matically after detected with REGZA-LINK compatible equipment. �� shown with the REGZA-LINK icon.


Inputs

REGZA−LINK

�� appears showing all connected REGZA-LINK equipment.

��REGZA-LINK equipment, and then press to select.


Inputs

REGZA−LINK

Quick SetupDisc PlayerHDMI1

51

English

One Touch PlayThe function of REGZA-LINK will automatically power on the television that was in standby mode and switch the television’s input source to the port connected with the audio/video equipment by powering-on or playing from the audio/video equipment.NOTE: This feature is dependent on the

connected equipment and television setting.

System StandbyThis feature automatically switches the con-nected equipment into standby when the television goes into standby and conversely for the television to switch into standby when connected equipment goes into standby. It is selected in the REGZA-LINK Setup menu.NOTE: This feature is dependent on the

connected equipment and television setting.

System Audio ControlUsing the Speaker Preference feature allows the television’s remote control to adjust the volume or mute the sound of the speakers con- �� *��' �� *�� REGZA-LINK equipment are selected in the input source selection and that the Speaker Preference is set to Audio Receiver in the REGZA-LINK Setup menu.NOTE: �� *��"��

its input source changed or the volume adjusted, the sound will be output from ��*��<��%�� ?*speakers has been selected. Turn the television off then on again to output the sound from the TV’s speakers.

The full function may not work and is depend-� ��

Enable REGZA-LINKWhen the Enable REGZA-LINK is set to On, it allows the other functions to be enabled.

Press MENU��PREFERENCES and press to enter the submenu.


��REGZA-LINK Setup, and press to enter the sub-menu.

EnterOK BackRETURN

PREFERENCESREGZA−LINK SetupTeletextPanel LockAuto Format4:3 StretchBlue ScreenSide PanelDivX RegistrationDivX Deregistration

AutoOffOnOffOn1

OK

OK

��Enable REGZA-LINK�� select On or Off.

REGZA-LINK SetupEnable REGZA−LINKAuto Power OnAuto StandbyAmplifier ControlSpeaker Preference

OnOnOnOn

TV Speakers

Edit BackRETURN

REGZA-LINK MenusBy activating the Enable REGZA-LINK feature in the REGZA-LINK Setup menu, individual REGZA-LINK features can then be activated.

52

Engli

sh

Auto Power OnThe Auto Power On setting allows the televi-sion to be automatically switched On or Off if a REGZA-LINK device is turned on or off.

In the REGZA-LINK Setup menu, press ��Auto Power On.

��On or Off.

Auto StandbyWhen the Auto Standby is enabled, switching off the television will automatically switch off all connected REGZA-LINK equipment.

In the REGZA-LINK Setup menu, press ��Auto Standby.

��On or Off.

�� When �� is set to On, it allows the Speaker Preference feature to become available.

In the REGZA-LINK Setup menu, press �� .

��On or Off.

Speaker PreferenceThis feature allows the audio output prefer-ence to be set to the TV speakers or Ampli-��%��?�� television’s remote control adjust or mute the volume of the audio.

In the REGZA-LINK Setup menu, press ��Speaker Preference when �� is On.

��TV Speakers or ��.

NOTE: This function is only available when the TV is connected to audio receivers that support CEC function.

53

EnglishREGZA-LINK Playback Device ControlThis is a new feature that uses CEC technology and allows you to control REGZA-LINK compatible devices from the TV remote control via HDMI connection.When there are two or more REGZA-LINK devices connected to the television, the device selection menu appears. Highlight the desired device, and then press to select.

GUIDE EXIT

MENU

MENUCONTENTSROOT TOP DVD

RETURN

3

6

21

3

21

879

4 5

68

79

4 5

Remote Control Pass-Through Control Panel

NOTE: = ��REGZA-LINK in the Quick access menu, and then press . The

Pass-Through Control Panel appears.= Some functions are only available when the Pass-Through Control Panel is displayed on

the screen. Please refer to the following procedure.= Please refer to the Remote Control�� "� ��%��

the Pass-Through Control Panel.= MENU and RETURN buttons on the remote control are unavailable when the

Pass-Through Control Panel is on.

No Item Description1 GUIDE Turn off the desired REGZA-LINK device.2 EXIT Close the Pass-Through Control Panel.3 In contents menu:

�� Navigate contents menu.Enter contents menu, ect.

When viewing the video:� Pause.� Stop.� Rewind.� Forward.

Play.4 MENU Skip Reverse.5 RETURN Skip Forward.6 ROOT Root key.7 DVD DVD key.8 CONTENTS Contents key.9 TOP Top key.

NOTE: These functions depend on the devices connected.

54

Engli

sh Preference Controls

On TimerThis feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. When On timer is set to On, the green On Timer indicator on the front of the television is lit.

Press MENU��APPLICATIONS and press to enter the submenu.


��On timer and press to enter the submenu.

EnterOK BackRETURN

APPLICATIONSEPGOn timerSleep TimerDemo

00:00OK

OK

��Enable On Timer� ��On or Off.

On timerEnable On TimerEnable DTV ClockPower On TimeRepeatInputChannelVolumeTime Until Power On

OnOn

00:00ONCEATV

030

00:00

Edit BackRETURN

NOTE: The settings are only available when Enable On Timer is On.

��Enable DTV Clock� ��On or Off.NOTE: Power On Time and Repeat are

only available when Enable DTV Clock is On.

��Power On Time � �� key pad on the remote to enter the time.

��Repeat and ��ONCE, DAILY, Mon.~Fri., Mon.~Sat. or Sat.~Sun.

��Input and press ��ATV, EXT 1, EXT 2, EXT 3, HDMI 1, HDMI 2, PC or DTV.

��Channel and �� number or use the number key pad on the remote to enter the channel number.

NOTE: = Channel is only available

when the Input is ATV or DTV.

= Blank screen will appear if not tuned.

��Volume and ��use the number key pad on the remote to enter the volume.

��Time Until Power On� ��number key pad on the remote to enter the time for the TV to turn on automati-cally.NOTE: Time Until Power On is only

available when Enable DTV Clock is Off.

Sleep TimerThe television can be set to turn itself Off after a certain length of time.

Press MENU� ��APPLICATIONS.

��Sleep Timer (Turn off the TV).

��?*should turn off, or use the number key pad on the remote to enter the time.

55

EnglishEPGEPG (Electronic Programme Guide) supports 9 sets of timers. You can set or cancel a timer for a selected programme within the guide. When the TV is on and the timer activates, a dialogue box is shown informing you that the programme is about to start. When the TV is in standby mode and the timer activates, the TV will wake up with backlight off, speaker mute on, and change to the channel selected.You must set the time correctly before using this function. All set timers are cleared when performing a new channel scan.

Press GUIDE on the remote to display the Programme Guide.

Programme Guide 4 Rossia K

09:04−10:5810:59−11:0211:02−11:0711:07−12:2912:33−12:5713:00−13:0313:03−13:0713:07−13:1713:18−13:44

Deejay Chiama Italia

Deejay HitsThe ClubDeejay Tg

Deejay News BeatDeejay News Beat

27 Aug 08:54:17 Fri, 27 Aug

44567891011

Rossia KRadio RossiaNTVRossia 2TRK 5 KanalBibigonService Information..Service Information..SIT 5

BackRETURNMore Info Timer List TIMEROKMove

��channel and press to enter the pro-gramme schedule.

��programme and press to enter the TIMER menu.

Programme Guide 4 Rossia K

09:04−10:5810:59−11:0211:02−11:0711:07−12:2912:33−12:5713:00−13:0313:03−13:0713:07−13:1713:18−13:44

Deejay Chiama Italia

Deejay HitsThe ClubDeejay Tg

Deejay News BeatDeejay News Beat

27 Aug 08:54:17 Fri, 27 Aug

44567891011

Rossia KRadio RossiaNTVRossia 2TRK 5 KanalBibigonService Information..Service Information..SIT 5

BackRETURNSaveOKEdit

Programme Timers4 Rossia K

"Deejay Chiama Italia".09:04−10:58 27 Aug 2010

ONCEOff

RepeatSubtitle

07:42:12 Fri, 27 Aug

��Repeat or �� #��settings as required.


Press the button on the remote to enter the Timer List menu.

Programme Timers 07:42:58 Fri, 27 Aug

BackRETURNEditOK

4611

Rossia KRossia 2SIT 5

Channel DateFri, 27 AugFri, 27 AugFri, 27 Aug

Time07:52−07:5808:05−08:3509:45−11:55

RepeatONCEONCEONCE

Delete

��programme and press to edit.NOTE: Press the button on the

remote to delete the timer.

Programme Timers 07:35:39 Fri, 27 Aug

4611

Rossia KRossia 2SIT 5

Channel DateFri, 27 AugFri, 27 AugFri, 27 Aug

Time07:52−07:5808:05−08:3509:45−11:55

RepeatONCEONCEONCE

BackRETURNSaveOKEdit

Programme Timers801 Rossia K

801 Rossia K2010/08/27

08:0508:35ONCE

Off

ChannelDateStart TimeEnd TimeRepeatSubtitle

��Channel, Date, Start Time, End Time, Repeat or Subtitle� ��#��settings as required.


NOTE: = When the timer is set, the Timer LED

on the front panel lights on.= After adjustment, the TV clock

may not match the time in the EPG Programme Guide. The EPG Programme Guide time follows the broadcast stream time which can not be adjusted.

56

Engli

sh

4:3 StretchWhen 4:3 Stretch is activated, this function will switch 4:3 format programmes into a full screen picture.

In the PREFERENCES�� 4:3 Stretch.

��On or Off.

NOTE: In HDMI signal format, this function is available.

Blue ScreenWhen Blue Screen is selected, the screen will turn blue when no signal is received.

In the PREFERENCES�� Blue Screen.

��On or Off.

NOTE: This function is not available in DTV mode.

Side PanelThe Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps prevent image reten-tion of the band and can also make viewing in bright or dark conditions more comfortable.

In the PREFERENCES�� Side Panel.��#�� required.

Panel LockPanel Lock disables the buttons on the televi-sion. All buttons on the remote control can still be used.

Press MENU��PREFERENCES and press to enter the submenu.


��Panel Lock and ��On or Off.


AutoOffOnOffOn1

OK

OK

Edit BackRETURN

When Panel Lock is On, a reminder will appear when the buttons on the television are pressed. If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control.

Auto Format (Widescreen)When this television receives a true Wides-creen picture and Auto format is On, it will au-tomatically be displayed in Widescreen format, irrespective of the television’s previous setting.

In the PREFERENCES�� Auto Format.

��On or Off.

57

EnglishDivX RegistrationView the registration code that is required to ��"��DivX® VOD (Video On Demand) service on the TV. DivX® VOD is a video delivery service that lets you rent or purchase video content re-corded in DivX®��?��are compatible with the DivX® VOD service, the TV needs to be registered as a DivX® player.In the PREFERENCES�� select DivX Registration and press .

You must register your device toplay DivX® protected videos.

Registration code:XXXXXXXXXX

Register athttp://vod.divx.com

OK

DivX DeregistrationIn the PREFERENCES�� to select DivX Deregistration and press to delete the registration.��OK�� Cancel to exit and press .

Deregistration code:XXXXXXXX

Deregister athttp://vod.divx.com

Continue with registration?

OK Cancel

System InformationIn the SETUP�� System Information and press to display �� "��

System Information

TOSHIBA2012

Dec 13 2011, 19:52:05, FW: v0.14 (PR)

StrongWeak

530 MHz Good

Average

BackRETURNEnterOK

System UpgradePress MENU��SETUP and press to enter the submenu.


��System Upgrade and press to enter the submenu.

��Auto Upgrade � ��On or Off.

Software UpgradeAuto UpgradeAuto InstallManual OADUSB Upgrade

OnOff

Edit BackRETURN

OK

OK

Insert a USB storage device.��USB Upgrade and press to start upgrading the ��"��

USB Upgrade

0 %

BackRETURNEnterOK

NOTE: Firmware upgrading is suggested to be done by the professional service personnel.

58

Engli

sh

Control ButtonsBelow is a guide to the functions of the remote control text buttons.

Displays the index/initial page:Press to access the index/initial page. The page displayed is dependant on the broad-caster.

Reveals concealed text:To discover the solutions on quiz and joke pages press the button.

Holds a wanted page:At times it is convenient to hold a page of text.Press and will appear in the top left of the screen. The page will be held on-screen until the button is pressed again.

Enlarges the text display size:Press once to enlarge the top half of the page, press again to enlarge the bottom half of the page. Press again to revert to normal size.

Selects a page while viewing a normal picture:Enter the page number then press , a nor-mal picture will be displayed. The television will indicate when the page is present by display-ing the page number at the top of the screen.

To display �� "�� text service (see the index page of your text service).By pressing � �"��"��-played as and when they are broadcast. Press

again to cancel the display.How to change the page:�� "�� sub page is available.?�� "�� changing channels.

Setting the ModesIn the PREFERENCES�� Teletext.

EnterOK BackRETURN


AutoOffOnOffOn1

OK

OK

��Auto or LIST.

Navigating Pages using AutoIf Fastext is available, four coloured titles will appear at the base of the screen.To access one of the four given subjects, press the relevant coloured button on the remote control.For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer.

Navigating Pages using LISTIf Fastext is available, four coloured titles with numbers 100, 200, 300 and 400 have been programmed into the television’s memory.To view these pages press the relevant col-oured buttons.To change these stored pages press the rel-evant coloured button and enter a new 3 digit number. This number will change in the top left of the screen and in the coloured highlight. Press to store. The bars at the bottom of �� "��"�� is pressed all four page numbers showing at the bottom will be stored and the previous ones will be lost. If is not pressed the selection will be forgot-ten when text is cancelled.Other pages may be viewed by entering the 3 digit page number – but DO NOT press or these pages will be stored.

Text Services and Text InformationThis television has a multi-page text memory, which takes a few moments to load.

59

EnglishPC Settings= Most of the picture controls and functions are available. However features not available will be

greyed out.= In the PC input mode, the Manual Setting is not displayed.= First press � �� in

order to select the PC input mode.= This function may not be available for some signal or if no signal is received.= The optimum points of the clock phase and sampling clock adjustments may be incomprehensible

according to the input signals.

Horizontal and Vertical PositionConnect the PC (as shown in the “Connecting a Computer” section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference.



��PC Setting, and press to enter the submenu.

EnterOK BackRETURN

SETUPLanguageCountryAV connectionPC SettingAuto AdjustAutomatic Power DownLocationSoftware Upgrade

EnglishGermany

OffHome

OK

OK

OK

OK

��Horizontal Posi-tion or Vertical Position� ��#�� $��

PC Setting

OK

Horizontal positionVertical positionHorizontal widthClock phaseReset

0000

Edit BackRETURN

Horizontal WidthIn the PC Setting�� to select Horizontal width.

��#�� required.

Clock PhaseThe Clock phase matches the PC signal with the LCD display. Adjusting this can clear horizontal stripes and picture blur.

In the PC Setting�� to select Clock phase.

��

ResetThis feature resets all PC settings to the fac-tory settings.NOTE: If any PC settings have not been

changed, Reset is not available.

In the PC Setting�� to select Reset.

Press .

NOTE: = When a PC is connected using

HDMI none of these functions will be available.

= The screen is disrupted momentarily when adjusting PC setting. This is not a sign of malfunction.

= The default settings and adjustment ranges may vary depending on the input signal format.

60

Engli

sh Input Selection and AV ConnectionsUse the Input Selection feature if the television does not switch over automatically when using an external device.

Input Signal SelectionYou can select source of AV or S-VIDEO from this function.



��AV connection, and press to enter the submenu.

��EXT1 input and ��AV or S-VIDEO.

AV connectionLip SyncEXT1 input

OnAV

Edit BackRETURN

Lip Sync Mode This option activates an auto audio/video display timing adjustment function that allows HDMI source devices to accurately perform synchronization automatically.All of the above HDMI settings require a proper HDMI source device.If HDMI source products do not support these functions, the TV may not work properly when activating these functions.

NOTE: = In a non-HDMI signal mode, this

function is not available.= In your HDMI connection is capable

of 1080p and/or your TV is capable of refresh rates greater than 60Hz or supports Deep Colour, you will need a Category2 cable. Conventional HDMI/DVI cables may not work properly with this mode.

61

EnglishFrequently Asked Questions

Q +��.

A Check that the television is on and that all connections are made properly.

Q 0�� .

AThe colour is factory set to Auto to auto-matically display the best colour system.When using an external source, if there is little or no colour, improvements may sometimes be achieved.

0�� 2

With the external source playing, select Manual setting in the SETUP menu.

�� Auto, NTSC 4.43, NTSC 3.58, SECAM or PAL.

Manual setting

EXT 1

Colour system: Auto

A


Q +��)��3�4�� .

AMake sure the VCR or DVD player is connected to the television, then select the correct input by pressing .

Q +�� .

ACheck all cable connections and that the volume has not been turned down or that the sound has not been muted.

Q +� �� .

AInterference or a weak signal. Try a �� >� �� tuning may help:

Select the ATV Manual Tuning in the SETUP menu.Highlight the station and press , then �� tuning.

ATV Manual TuningManual fine tuning

1 BG P C 69 0 − − − − −


�� #��picture and sound. Press and then RETURN.

Q +��)��$.

A Check that the batteries aren’t dead or inserted incorrectly.

Q +�� 5�.

A

Good performance of text depends on a strong broadcast signal. If the text is unreadable or garbled, check the aerial, satellite or cable connection. Go to the main index page of the text service and look for the User Guide. This will explain the basic operation of text in some detail.

Q +�� 5��5�.

AText has been selected while viewing an external source. No text will appear on-screen or a box may appear stating no information is available. Select a broadcasting channel and press to access.

62

Engli

sh

Q +�� 70'%�� .

AConnect the source via a SCART cable and play. Select Manual setting from the SETUP menu and set the Colour System to Auto.

Manual setting

EXT 1

Colour system: Auto

A


Q +� �� .

A Use the universal password 1276, then change to a new number of your choice.

Q +��)�� !"�� .

AMake sure to use cables with the HDMI logo ( ®). Some early HDMI equipment may not work properly with the latest HDMI TV products, due to adoption of new standards.

Q +��4%93�4�� $� ��.

A Check the correct input has been cho-sen: S-VIDEO or AV.

Q +��04��.

AAfter roughly 15 minutes without any input video signal at TV mode, the TV will turn off to save power.

63

English

= ?�� "�� "��

DVB-T Broadcast systems/channels Broadcast systems/channels

UK UHF 21-68 PAL-I UHF UK21-UK69France VHF 05-10

(VHF 01-05)UHF 21-69

PAL-B/G UHF E21-E69VHF E2-E12, S1-S41

Germany VHF 05-12UHF 21-69

SECAM-L UHF F21-F69VHF F1-F10, B-Q

Austria VHF 05-12UHF 21-69

SECAM-D/K UHF R21-R69VHF R1-R12

Switzerland VHF 05-12UHF 21-69

Italian VHF 05-12 (D,E,F,G,H,H1,H2)UHF 21-69

Spain UHF 21-69

Nederlands VHF 05-12UHF 21-69

Sweden VHF 05-12UHF 21-69

Finland VHF 05-12UHF 21-69

Greece VHF 05-12UHF 21-69

Video Input PAL, SECAM, NTSC 3.58/4.43

External connectionsEXT1 Input/Output 21-pin SCART Auto, Mixed, RGB,

Composite, S-Vídeo / TV Out

EXT2/EXT3 Input RCA jacksRCA jacks

(EXIT2) Video (EXIT3) Y, PB/CB/PR/CR

RGB/PC Input D-sub RGBHDMI 1/2 Input HDMI®

AudioEXT2/EXT3 RCA jacks Audio L + R (shared)Digital Audio Output

(S/PDIF)Coaxial

USB Port Interface version: USB Class: File system:

USB 2.0USB Flash DriverFAT32

Stereo Nicam2 Carrier System

�� 32AV93*G B Class32LV93*G B Class40LV93*G B Class26EL93*G A Class32EL93*G A+ Class32HL93*G A+ Class40HL93*G A+ Class

Visible Screen Size(approx.)

32AV93*G 80cm32LV93*G 80cm40LV93*G 102cm26EL93*G 66cm32EL93*G 80cm32HL93*G 80cm40HL93*G 102cm

On mode power consumption**(approx.)

32AV93*G 55.9W32LV93*G 54.5W40LV93*G 87.2W26EL93*G 27.0W32EL93*G 29.6W32HL93*G 31.5W40HL93*G 46.8W

Annual power consumption***(approx.)

32AV93*G 81.6KWh/y32LV93*G 79.6KWh/y40LV93*G 127.3KWh/y26EL93*G 39.4KWh/y32EL93*G 43.3KWh/y32HL93*G 46.0KWh/y40HL93*G 68.3KWh/y

** Tested in accordance with IEC 62087-BD Ed. 2.0:2008 in default settings.*** Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

Standby power consumption(approx.)

32AV93*G <0.3W32LV93*G <0.3W40LV93*G <0.3W26EL93*G <0.3W32EL93*G <0.3W32HL93*G <0.3W40HL93*G <0.3W

Screen Resolution(pixels)

32AV93*G 1366 x 76832LV93*G 1920 x 108040LV93*G 1920 x 108026EL93*G 1366 x 76832EL93*G 1366 x 76832HL93*G 1920 x 108040HL93*G 1920 x 1080

Display 16:9

Sound Output(At 10% Distortion)

32AV93*G 5W + 5W32LV93*G 5W + 5W40LV93*G 7W + 7W26EL93*G 5W + 5W32EL93*G 5W + 5W32HL93*G 5W + 5W40HL93*G 7W + 7W

64

Engli

sh Power consumption(approx.)

32AV93*G 130W32LV93*G 126W40LV93*G 218W26EL93*G 60W32EL93*G 68W32HL93*G 76W40HL93*G 101W

Weight(approx.)

TV with stand 32AV93*G 9.5kg32LV93*G 9.0kg40LV93*G 14.0kg26EL93*G 6.0kg32EL93*G 9.0kg32HL93*G 9.5kg40HL93*G 14.5kg

Gross weight 32AV93*G 12.5kg32LV93*G 12.5kg40LV93*G 18.5kg26EL93*G 8.5kg32EL93*G 12.5kg32HL93*G 12.5kg40HL93*G 18.5kg

TV without stand 32AV93*G 8.7kg32LV93*G 8.2kg40LV93*G 13.0kg26EL93*G 5.5kg32EL93*G 8.5kg32HL93*G 8.9kg40HL93*G 13.7kg

Dimensions(H x W x D mm) (approx.)

32AV93*G 785 x 528 x 20532LV93*G 785 x 528 x 20540LV93*G 980 x 641 x 24026EL93*G 620 x 426 x 17532EL93*G 746 x 507 x 20532HL93*G 736 x 497 x 20540HL93*G 924 x 604 x 225

Headphone Socket R3.5mm stereo

Operating Conditions Temperature: 5oC - 35oC (41oF - 94oF)

Humidity: 20% - 80% (non-condensing)

Accessories Remote control2 batteries (AAA, IEC R03 1.5V)User Manual

�� #�� "��

65

EnglishLicense Information= DivX®��:�%��® and associated logos

�� $��9��%�� %��&�'�� 2�;�<=>�?;@B�;�F?G�??HB�;�>J>�;JGB�;�>J=�<;F

K�L&0��"4:�4"�ML2��:® is a digital �� :��##%�� 9��%�� 0�� :�%��®�� :��4��5�� -�� :��K�L&0��"4:�4"�ML�L7��M!K7�2�0��:�%��® device must be registered in �� :�4�� N4L�O��0�� :�4L��P��5��

= ! �� # �� -�� $��# ��

= ��!"��!"�� !�� "�� $��-�� $��!"�#��##%��&��'� ��

= !(MP�# ��@� ��Q� ��""'� ��0��

= 0�"'�(9L�&%0�"'�#"%M7'M��&7�M9�0�M�!(MP�F�4"'&K#�(K0M70�(L90QL#"L�#"%M7'M�QL9�0�M�(M9-'L7K#�K7��7L7%L!!M9%"K#�&'M�LQ�K�%L7'&!M9�QL9�N�O�M7%L�"7P�4"�ML�"7�%L!(#"K7%M�+"0��0�M�!(MP�F�4"'&K#�'0K7�K9��NR!(MP�F�4"�MLTO�K7�3L9�N��O��M%L�"7P�!(MP�F�4"�ML�0�K0�+K'�M7%L�M��U�K�%L7'&!M9�M7PKPM��"7�K�(M9'L7K#�K7��7L7�%L!!M9%"K#�K%0"4"0U�K7�3L9�+K'�L�0K"7M��Q9L!�K�4"�ML�(9L4"�M9�#"%M7'M��U�!(MP�#K�0L�(9L4"�M�!(MP�F�4"�ML��7L�#"%M7'M�"'�P9K70M��L9�'�K##��M�"!(#"M��QL9�K7U�L0�M9�&'M��K��"-0"L7K#�"7QL9!K0"L7�"7%#&�"7P�0�K0�9M#K0"7P�0L�(9L!L0"L7K#��"70M97K#�K7��%L!!M9%"K#�&'M'�K7��#"%M7'"7P�!KU��M�L�0K"7M��Q9L!�!(MP�#K��#�#�%��'MM��00(233+++�!(MP#K�%L!

= 0�"'�(9L�&%0�"'�#"%M7'M��&7�M9�0�M�K4%�(K0M70�(L90QL#"L�#"%M7'M�QL9�0�M�(M9'L7K#�K7��7L7�%L!!M9%"K#�&'M�LQ�K�%L7'&!M9�0L�N�OM7%L�M�4"�ML�"7�%L!(#"K7%M�+"0��0�M�K4%�'0K7�K9��NRK4%�4"�MLO�K7�3L9�N��O�M%L�M�K4%�4"�ML�0�K0�+K'�M7%L�M��U�K�%L7'&!M9�M7PKPM��"7�K�(M9'L7K#�K7��7L7�%L!!M9%"K#�K%0"4"0U�K7�3L9�+K'�L�0K"7M��Q9L!�K�4"�ML�(9L4"�M9�#"%M7'M��0L�(9L4"�M�K4%�4"�ML��7L�#"%M7'M�"'�P9K70M��L9�'�K##��M�"!(#"M��QL9�K7U�L0�M9�&'M�K��"0"L7K#�"7QL9!K0"L7�!KU��M�L�0K"7M��Q9L!�!(MP�##K�#�#�%�'MM��00(233+++�!(MP#K�%L!

66

Engli

sh

DVB is a registered trademark of the DVB Project

© TOSHIBA Television Central Europe Sp. z o.o. 2012All rights reserved.

Reproduction in whole or part without written permission is strictly prohibited.

TOSHIBA Television Central Europe Sp. z o.o.ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland

�� #�� "��

Cleaning the screen and cabinet…0�� +��

Disposal…0�� M&�� 2

Disposal of products0�� "�� 0�� 0�� $�� $�� K��J@��<GG>�� assure the proper disposal of products and batteries and thus help to prevent potential negative ��*�� Q��

Disposal of batteries and/or accumulators0�� 3�� "�� N(�O�� N��O�� 3�� N%�O�� N<GG?3??3M%O�� N(�O��N��O� �3�� N%�O�� *�� Q��

EU

In conformity with the EEE Regulation.

EU Conformity Statement

“This product is marked with “CE” and complies therefore with the applicable harmonized European standards listed under the Low Volt-age Directive 2006/95/EC and the EMC Directive 2004/108/EC.”

Responsible for CE-marking is TOSHIBA EUROPE GMBHHammfelddamm 8 D41460 Neuss. Germany

© TOSHIBA Television Central Europe Sp. z o.o. 2012All rights reserved.

Reproduction in whole or part without written permission is strictly prohibited.

Specification is subject to change without notice.ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland

TOSHIBA Television Central Europe Sp. z o.o.

32AV93G 32/40LV93G 26/32EL93G 32/40HL93G...

Documents

Transcript of 32AV93G 32/40LV93G 26/32EL93G 32/40HL93G...

32AV93*G 32/40LV93*G 26/32EL93*G 32/40HL93*G...

Documents

Transcript of 32AV93*G 32/40LV93*G 26/32EL93*G 32/40HL93*G...

32AV93G 32/40LV93G 26/32EL93G 32/40HL93G...

Transcript of 32AV93G 32/40LV93G 26/32EL93G 32/40HL93G...