32( 53 )URQW 32( 53 Security Files - Do NOT delete/Sp… · wr wr (= 32( ([whqvlrq 6roxwlrq 32( 53...
Transcript of 32( 53 )URQW 32( 53 Security Files - Do NOT delete/Sp… · wr wr (= 32( ([whqvlrq 6roxwlrq 32( 53...
1-to-2(1-to-1) EZ POE Extension SolutionPOE-RP102(RP101) is a Power-over-Ethernet (PoE) Repeater. providing a100Mbps Ethernet transmission for 330ft distance and with 2(1) Ethernet switch ports extend another 330ft with power over Ethernet. It forwards both Ethernet and PoE for another 330ft (100m) using an innovative power-processing scheme and multiple units can be deployed in series for even scheme and multiple units can be deployed in series for even longer distances, with no degradation in network speed or latency.
Self-Powered AdvantagePOE-RP102(RP101) itself is powered by an Ethernet PoE switch (or PoE injector) and so requires no separate power connection in the middle of the cable, making it extremely easy to connect and power Ieasy to connect and power IP cameras two or three times further than previously possible without going to fiber or installing midspan power sources.
Easiest Extension Solution EverIn the simplest application, a POE-RP102(RP101) allows to connect two PoE Devices (PDs) located 660ft away from the In the simplest application, a POE-RP102(RP101) allows to connect two PoE Devices (PDs) located 660ft away from the POE switch. The switch delivers power over the first 330ft of Cat5 cable to the POE-RP102(RP101). The POE-RP102(RP101) restores the Ethernet signal and forwards remaining POE power to the PDs 330ft away. The POE-RP102(RP101) requires no local power supply, and the POE-RP102(RP101) presents no restriction to the Ethernet network connection. Typically, the PoE switch would be confined to a central equipment room, and would connect to several PDs dis-tributed through out the area. With POE-RP102(RP101), each PD may have its own dedicated connection to the switch, and power cable installation to remote switches would not be required.
POE-RP102
POE-RP101
2-port PoE Repeater
1-port PoE Repeater
POE-RP102 Front
POE-RP101 Front
POE-RP101 RearPOE-RP102 Rear
• Extends Ethernet cable installations for another 100 meters • 2-Port Ethernet Power Sourcing Equipment (PSE) • No power cable installation required• Fully Ethernet protocol transparent – no restrictions to network traffic • 100Mbps Ethernet Wire Speed • Compatible with IEEE 802.3af PoE standard•• IP66 Weather-Proof for RP102-ODU(RP101-ODU) outdoor unit• Simple to install – Plug & Play
PRODUCT ADVANTAGES
224-619-7888 [email protected]
1551 Carmen Dr. Elk Grove Village, IL 60007
PRODUCT DESCRIPTION
Outdoor Option
PoE RP101 Repeater
224-619-7888 [email protected]
1551 Carmen Dr. Elk Grove Village, IL 60007
Ethernet Interface:• IEEE 802.3x, Auto-Detection for 10/100BaseT and full/half duplex• Automatic MDIX function• PoE Input Port: RJ-45 Connector x 1 • PoE Output Port : RJ-45 Connector x 2 (POE-RP102) RJ-45 Connector x 1 (POE-RP101)•• Port-based VLAN function for LAN port
POWER:• IEEE 802.3af Compliant with voltage within 44-57Volt• Maximum Power Dissipation: 2.5 Watts
LED Indicators:• POWER: Power is ON POE OUT1: Data Activity of POE Out1 Port• POE IN: Data Activity of POE in Port POE OUT2: Data Activity of POE Out2 Port (Only for POE-RP102)
Regulations &Regulations & Approvals:• FCC Rules Part 15 • CE
Physical Dimension:• POE-RP102(RP101) WxDxH: 4.8 x 3.6x 1.2 (in) POE-RP102-ODU(RP101-ODU) WxDxH: 7 x 6.5 x 3.8 (in)
Operating Environment:• Humidity: 5% to 95% non-condensing Temperature: 32 ~ 122 °F
PRODUCT SPECIFICATION
POE-RP101POE-RP102
POE-RP101POE-RP102
POE-RP101-ODUPOE-RP102-ODU
Outdoor Solution
APPLICATION DIAGRAM