30,36and 48 Prefessiena Vent Hoods...covered raider the Wm'ra(]tv: Dl(e to the x_eight and size of...
Transcript of 30,36and 48 Prefessiena Vent Hoods...covered raider the Wm'ra(]tv: Dl(e to the x_eight and size of...
30",36"and 48"Prefessiena_Vent Hoods
Modens:ZV48T,ZV48SZV36T,ZV36SZV30T,ZV30S
Monogram;_½9 bring go_Jflthings to life,
mnstamiation mnstructions
BEFORE YOU BEGmNRead these instructions completely and carefully.
®IMPORTANT- S.veth i. .Ctiloc_4 im_spector's i_se.
®IMPORTANT- Obse,ve.11governh gcodesand ordinm]ces.
* Note to Installer- Be sl*re to leave these h]strl*ctions
_]th the Consm))er.
* Note to Consumer - Keep th ese h/sir wtion s flwhmlre re}brem]ce,
* Skill Level - Installat]o_] of this veto hood reqlx]resbasic mechm]]cal and electrical skills.
* Completion time- ] to 3 horn's,
* Proper im]sta]]ation is the respo_]s]bi]ity o} the his(allen
* Pro(b_ct fhi]m'e (b_e to improper his(alia(loll is m)t
covered raider the Wm'ra(]tv:
Dl(e to the x_eight and size of these vent hoods mid to
red(we the risk ot perso]ia] iqim'yo(" damage to the
product, _I_O PEOPLE ARE REQUIRED FORPROPER INSTALIATION.
PRUDENCE,_ cm(se (b( poids et de ]a tai]]e de ces holies et pore.
reduh'e ]e Hsque de b]essm'es et de dommages, IL FAUT
DEUX PERSONNES POUR FAIRE L'INSTAd_IATIONCORRECTEMEN'E
WARNmNG:To reduce the risk of fire or electrical shock, do m)t I_se
this ra(]ge hood _it]] rely exteri]a] so(hi-state speed
com]tro] device. Ally sl_ch a]teratiom] h'om original fhctorv
_]rh]g col_]d result h] damage to the m]]t mid/or create
an electrical salbtv hazard.
ADVERTmSSEMENTPore" rS(b_]re ]e risque d'h]ce]]die ol_ de choc 5]ectrique,
i] role tm_t pas (_t]]iser cette hotte w,'ec I(m] rSg_]atem" de
\itesse 5]ectrom]]que exteH]e. T(mte modificatiom] de ce
type du branchement d'l_sh]e pel_te e]]dommager
('apparel( ol_ cr&er m] Hsque de choc &]ectriql_e.
TO REDUCE THE RISK OF FIRE, USE ONIX METAd_DUC_PNORK.
2
TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK OR INJURY TO PERSONS, OBSERVE THEFOLLOWING:A. []se this m]]t on(Iv im]the mam]er im]te]]ded bv the
mm] (lfhctm'er. If yola h ave any qlaesti oils, coral tact th eman U.fh( tu.rer.
g. Befiwe servich]g or c]em_hig mill s_itch po_er offatthe service pro]el amid lock service pane] to preventpo_ er fl'om be] n g s_i tch ed (m acc] de_] talE. If th eserSce pmie] camlot be locked, thste]l a tag orprom h_e_ t wam]n g label to th e pan el.
ADVERT SSEMENTPOUR RItIDUIRE LE RISQUE D'INCENDIE, DECHOC f_LECTRIQUE OU DE BLESSURES, IL FAUTOBSERVER LES REGLES SUIVANTES:
A. [Jti]iser cet apparei] mii(p(eme]]t de ]a man]i&re
prt_vl(e par ]e thb(']cm]t. Ell cas de ql(estio]L co]]sl(]te("]e eft)ri cm ] t.
g. Axm]t to(tie i_]ter_e_]tio]] o_( nettoyage, co(q0er
]'a]ime_ltatio]] &lectriq_(e a_( db!jo]lctem" et
xerr(mi]]er ]e pa_l]]eaH dH d]sjo]lctel((" [boH(" 1_;iter ]a
raise so_(s tension a(cide]]te]]e. S'i] _]'est pas possible
de ; erro_(i]]er ]e pamlea_( (b( disc(mctem; atta( her
la] p]aca('d ol( line &tiq_(ette t('t_s visible a_( paili/ealL
Fo(" genera] ve]lti]ati_]o i(se on]]'_. Do _]ot i(se to exhm(st
hazard(ms or exph)sh e materials or vapors.
* Str_(ctm'a] fl'ami_]g, i_]sta]]atio_] v, ork mid electrical
_iring m(_st be done b} q_mlilied perso_](s), h]
acco('dm] ce x_i th all appIicab] e codes m]d start dards
inc]udi_]g th'e-rated CO]]StYI(ctio]]_* %(fliciei]t air is n]eeded t'o]" proper co]]]b_(stio]] mid
exha_(sti_]g of ,gases th('om,h_., the fi_(e (chi]m]e3) of f_(e]
bm'n]i_]g equipment to p('e_ eiit back dralting. Fo]]ox_
the heati_]g ecpdpme_]t mam(fhctm'e(" s guide]i_]e and
saletv stm]dards such as those p_(b]ished by theNatiom(] Fire Protectiol] Association (NFPA), and the
America_] Society for Heating, RelHgeratio_] and Air
Co]]dilioni_]g E_]gi_]eers (ASHRAE), and the localcode m(thorities.
* Ix)ca( codes vat*. Instal(at(o]] electrical co]]]]ecthms
mid _o('omldi_ig, ira(st comp]} "_ith applicable codes, h]the absei]ce of local codes, the vent shou.]d be i_]-
sta]] e d i_] ac c ord a_]c e _ai t h N at i o __a] El e ct('i ca] (i( _d e
,AN SI/NFPA 70-1990 or latest editio]].
UTION: ,)re(b(cerisk (,_ fire and to
proper]} exhm(st air, be sure to (b(ct air o_aside - Donot vent exhm(st air imo spa(es within walls or cei]i_gso]" i_]to attics, c]'av,] spaces, or garages.
PR U DE NCEI] fh(_t p('e_]dre soin d'i_]sta]]er
m] conduit vers ]'ext&riem" po_r r&duire ]e risq_e
d'h]ce]]die et po_voir _',_(c_er ]'air correcteme]]t. I] _]e
flint pas _vac_er ]'air correctem e]]t. I] ]] e tm_t pas
&vac(mr ] 'air dm] s ]' espace ell Ire ] es patois d' UJ] m m; UJ]
p]ahmd o_ m] grenier, m] espa(e sam(mire o_ m]
garage.
mnstaJiation mnstructions
Product Dimensions ......................................................... 3
]_stal]ation Clem'm_ces ..................................................... 4
Opdon;d Duct Co_ er Accessories .................................... 4
A&_mce Plmming ............................................................. ,5
Po_ er Supply .................................................................... 5Duct Fitth_gs ...................................................................... 6
Using Duct Cover Accessories .......................................... 7
Tools m_d MmeHals Requii_d .......................................... 8Remove t]_e packaging ..................................................... 8
Pm't_ Provided ................................................................... 9
Step 1, DetermiHe Ducrwork m_d Wiling LocadoD_s .... ]i0
Step 2A, I_smH Hood O_lto Wall .......................
Step 2B, |nscd] Hood Be]/emb Soffit ............................ 12
Stop 3, Com_ect Duct_ork ............................................. 13
Step 4, Co_mect Electrical .............................................. 13
Step 5, he4aH Duct Covers ............................................. 13
Step 6, Instal! Motor. ...................................................... 14
Step 7, histaH Filters ....................................................... 14
Step 8, h_sm]] Imp]emem Rods ..................................... 15
PRODUCT DIMENSIONS
Mode! ZV48S WitlB Straight Sides Model ZV48TWithTaperedSides
Mode! ZV36S WitlB Straight Sides Model ZV36T With Tapered Sides
_2
i/16' L;25 • 291 j16 .Mode! ZV30SWitl_ Straight Sides Model ZV30TWith Tapered Sides
3
Advance Planning
iNSTALLATiON CLEARANCESThese yen t ]]oods ;_]'e design ed to be in stall ed on to ;__;_]] o_" bene;_th a sol]it ol" cabinet.
• ]nsm]] these hoods:": 30" Min. to 317' Max. above the
cooking sm%_t e.
":These hoods mav be installed 24" mira above a gas o__
e]ect]ic d_x_p-in st_He cooktop. Ah_ays obse_we the 311"
t o 36" c] era'an ce _r ]_ ell ] _1 St_] ] e (1 (}V e_ _ a_] y p _xdessi on a]
style cooktop o_ __'ange.
Note: Clearances may vary due to type of cooking product andlocal codes, Check with local inspectors to be sure standard is
applicable,
Soffit Installation
SOFFIT
30" MIN
36" MAX.
El If
In] this installation the <il_ct_oH_ _'mming from the top
of the hood _rd]] be concealed in the soffit m" uppe_"
Wall MountInstallation
30" MIN.36" MAX.
II Jl
Fo_" this insta]]ation_ a deco_'ative divot cox e_" is n_ai]-
able to conceal the dl_ct_ao]'k _'m]i]]ng f}'om the top of
the hood. llse of the divot cove_" _'eq!_i_'es special
coils]de_'atioi] to the installation height above the
co m] te_'top.
OPTIONAL DUCT COVER
Deco_'ative duct cove_'s a]'e a_ti]ab]e hi 6" an d ] 2"
heights. Duct cove_'s may be star ked, in vm'iol_s
combinations, to conceal the d_lct_ olq_ _'mm]ng f}'om
the top of the hood to the ceiling.
gefo_'e v<m begin, yo_ sho_]d deteH_ine the insta]]a-
ti on ]]eigh t of th e hood an d o]'de_" th e coH'ect size
duct coven The duct cove]'s sh o_]d be o_'de_'ed at the
same time as the vent hood and be on site be%_'e
installation. O]'de_" the d_ct cove_" coH'espoilding tovoui-mode].
_6" DuctCover
12"DuctCover
@O
_" Duet COVerSHoo_ Mo_el 6" Duct Cover Dimensions
ZV48T, ZV48S ZX48DC6 6"H x 19-11/16"W x 11-7/8"D
ZV36T, ZV36S ZX36DC6 6"H x 15-3/4"W x 11-7/8"D
ZV30T, ZV30S ZX36DC6 6"H x 15-3/4"W x 11-7/8"D
12" D_ct Covers
Heed Model 12" O_ot (;over _imensiens
ZV48T, ZV48S ZX48DCI2 12"H x 19-11/16"W x 11-7/8"D
ZV36T, ZV36S ZX36DC12 12"H x 15-3/4"W x 11-7/8"D
ZV30T, ZV30S ZX36DC12 12"H x 15-3/4"W x 11-7/8"D
4
Advance Planning
ADVANCE PLANNINGDuctwork Phamlhr_g
* These \rel/t hoods m'e equipped fo_" 10" round
duct_ork_ Fin" best perfoHmmce, use 10" _'ound) _TTduct_orkcq] the 48" _ide hoods. 30"ando6 hoods
• _TT
* This hood ma) be _,ented veYt]ca]]v t]U'Oligh Up]._eY
cabhlets_ sol{it o] _ ce]]im]g. ,5 diB.ct t]'am]sitiim piece is
supplied ho]" xe]'tica] exhausL [!se ]oca]]) supplied
e]bo_,_ s to \relit hoI']z(}llta]]} thlX)l_.gh the Yea]l" _Aa]].
* Determine the exact location oh the vent hood.
e P]ai] the ]'oHte bOY veilthlg ex]laHst to the oIKdoo]'s.
* [Jse the shoi'test mid st]'aightest duct ]xage possible.
Fo_ _ satisfhcto_ _) pe_'l'ormam]ce duct _'m] should
not exceed 150 ft. equha]em]t length for mix duct
* Rehex" to "Dt_ct Fittings" chm't to compute the maxi-
mm_ peH_issib]e ]em]gth fo_ _ (h_ct x'm]s to the om-
doo1"s.
. [ Ise m eta] (h_ct_ o_'k imh.
* Install a _aH cap ox" roof cap with dampex" at the
ex teri ox" opeiiim] g. Ox'dex" the _ a]] ox" _'oof cap am]d anv
ti'ansitioi] m]eeded hi advance.
Wahl Framhng for Adequate Support
* These veto hoods are hea_v_ Adeqtmte stx'tactm'a]
stq0po_'t mt_st be p_'ovided. Hoods mt_st be secm'ed to
ve_'tica] studs hi the _a]]
* [t ]S StI"OI] g]y 1"eCOrn m ell d th at th e veil t h oo d w] th
duct cove_" be oil site befb_'e hh]a] f_'amh]g mid wail
fi_ishh]g_ This wi]] also help to acctu'ate]y locate the
dtlct_aoi"]< a_]d e]ect_'ica] se_'vice.
Decorative Duct Covers:
Decorative (h_ct cove_'s_ 6" a_]d 12" high_ a_'e a_i]ab]e to
fit a]] m odels_ The d_ct cox e_" co_] ceals th e dt_ct_ o_'k
1"tm_lhlg h}'om the top (if the hood to the cei]i_]g or
so{tit. Stack ol/e oi" mo1"e dllct cove_'s ove_" the top of
the hood to I'each vom" cei]i_g height.
POWER SUPPLYIMPORTANT- (Please _'ead tastefully)
F )ix _ERS )NAI, SAFETL THIS A_ _IAAN ,E M[JSTBE _:]x )[ ERi,S (R)[ NDED.
P()[ JR DES P,AISONSDE SE(_[ JRITE, CET APPARE]I_ DOlT I_TP,E( OP,RE('_TEMENT MIS ,_ iA TEP, RE.
Remme house huse o] open chcuh lu'eake1" befo]'ebegim_i_g i_sta]]atiom
Do not use a_] extensitm cord or adapte_" plug x_ith this
app]iance. Fo]]ox_ N ation a] e] ectI'i ca] codes o]" [)]ffe\'}ld]-
ing local codes mid o]'dinances.
Electrica_ suppig
and clmnected to an individual, p_'ope_'])groin]deal
branch ci_'ctdt, and p_'otected b_ a 15 or 211 amp ci_'ctdt
bi'eakei" o]" time delav fuse.
* _ h'ing must be 2 _i]'e _ith gl'otmd_
* If the electrical supp]} does m_t meet the aboverequirements, ca]] a licensed electrician before
* R orate h o_se w] _'1_]g as c] ose to th e hi stall ati o_]
1ocati(m as p ossi b]e on the back _r_]] _" cei]i _g.
* ('.om]ect the _d_'i_g to the hot_se wi_'i_]g i_ acco>dance _ith local codes.
Grounding instructionsThe g_'om]dino conductor must be com]ected to a
,g1"(amd metal, [3ei'l]_a_le_lt w]i']_lom s_ stem of a_] equip-
ment-_g]xm_/di_lg te]q/_imt] o]" lead o_] the hood.
WARNI NG: The imp]'ope]" comlectio,] of
the eqtdpme_]t-gmtmding conductox" cm] x'em]t i_] a
x'isk of e] ectx'i c sh ock_ Ch eck wit h a q ua]ifi ed e] ectx'ician
o_" se_'vice _'ep_'ese_]tative if vot_ m'e in dot_bt _hethe_"
the app]ia_ cei s px'ope_']y gx'otm ded.
ADVERTISSEIVIENTi,e mam'ais bmnchement du fh] de raise 5 ]a teH'e peut
cause]" m] choc 5]ect]'ique. E_] cas de d(mte_ co_]su]te]"
m] &]ecti'icien qualifi5 ou m] tec]micien pore"
dSteH_i_]e]" si ] appa]'ei] est 5 ]a teH'e.
5
Advance Planning
DUCT FiTTiNGS
[ !,_e this chayt to co]_pllte
permissab]e lengths for duct rm]s to
ol_td{>o]'s.
Note: Do not exceed maximum penTfissable
equivalent lengths!
lViaximmn recommended duct
lengthfor these heeds: 150 feet
Flexible ducting:
If flexible metal ducting is used, all
the eq u]va] en t {b'et wt] ues h/ the tab] e
should be doubled. The flexible
metal duct should be straight midsmooth m] d exten deal as much as
[)<> NOT use flexible plastic ducting.
No*e: Anyhomevel]tilation system,suchas a
veHtilationhood.mayiHterruptthe properflow ofcombustionair andexhaustrequiredbyfireplaces.gasfurnaces,gaswater heatersand othernaturallyv@ted systems Torrfi,hoizethe chanceof interruptionof suchnaturallyventedsystems,follow the heatingequipma]t mamfacturer'sguideIMesand safetystandardssuchasthosepublishedbyNFPAaridASHRAE
_Hoodsare supplied with a 10"round transition, A locallysupplied transition is requiredfor other sizes,
Note: Outletontop of hoodis8-1/8"x 82
*Actual length of straight duct plus duct fitting
equivalent, Equivalent length of duct pieces
are based on actual tests conducted by GE
Evaluation Engineering and reflect require-
merits for good venting performance with
any ventilation hood,
Total Duct Run
6
Advance Planning
USING DUCT COVER ACCESSORIESTo avoid unsightly gaps, plan the hood installation
height for duct cover use. Use the foRowing formumato cMculate the need for one or more duct covers
and to ensure a trouble free installation.
CeilingHeight
_\'e reco]?? m eH d [h at [h e vem] [ hood am/d decora[ive
divot cover (if I_sed) be on site betiwe th]al f?'amim]g and
_ all fi nish h_g, Thi s will h el p to accm'atdv locat e st uds,ductwork am_d el ectH ca] service.
* Read these examples carefl_]]y to determine the needf()r o_/e or more (_" or ] 2" dllct covers.
// 1| HeightI_ ®® • I __l_t_
A = Countertop to ceiling height.
B = Gap at the top of the hood to the ceiling,
C = Hood installation height =Plus 18" hood height.
I1
A=B=C
NOTE: Dim. (: sholaid be betweel_ 48" and 54" (flw a
30" to 36" im_staiiation l_eigi_t). Raise or lo_er tile l_ood
im_stai iati o_] l_eigl_ t to aii<u_ use of on e or m ore 6" an d
] 2" dllct covers.
8 ft. Ceiling
/ 1_2"
L oo!130"
iNSTALLATiON EXAMPLES
g ft. Ceiling
®® ll
30"
10 ft. Ceiling
86"
qr bl
8 ft. ceiliilgs: When the hood is installed30"above the cooking surface and there isno soffit or upper cabinetry, order one 12"duct cover accessor,i.
II Ji lr II
9 ft, ceiii,gs: When the hood is installed 30"above the cooking surface, order two 12"ductcover accessories.
1@R, ceilings: When the hood is installed36"above the cooking surface, order two 12"and one 6"duct cover accessories.
mnstamiation Preparation
TOOLS AND MATERIALS REQUIREDtNOT SUPPLIED
Duct tape _
Wire cutter/stripper
Pencil and tape measure
Spirit level
Metal Snips
Safety glasse/__
i
Step ladderSaber sawor Sawsall
Key Hole Saw
_D
Wire nuts
Flashlight
Electric or battery operated drilland 1/0", 3/0" bits
10" round metalduct, length tosuit insta!lation.
Phillips and flat
blade
wdrdivers Strain relief for
iunction cover.
120V 60Hz. 15 or 20 Amp,2-wire with ground= Properlygrounded branch circuit=
REMOVE THE PACKAGING• P,emove packages h'om the "\"' shaped _a]'dboa]'d
sect]oil. P,emove shippim]g pads.• i,ift the hood ola of the box.
IM PORTANT: ,..tthe,,,,,1,,1,,the <mtside edges of the e×haust opening on the top.
Wood_MountingSupport
', .... Duct ',,,
",,',, :--Transition--ii
"''i Parts',Hood ',,
' Motor ", ",; Mounted
on Skid
ShippingCarton
* The xem]t hoo d m ot_" is sh ipped secm'e d to the ski d x_ith4 sc]'ex_s, i,ocate and ]'emme 2 sc]'ews oral eath shle of the
moto]'.Disca]'dtheshil/o_im]g, skidm]d sc]'e_s.
m
_* F_'om the h]shie of the hood, ]oosem] (do mint _'emove)
the 2 sc]'e_ s ho]d]ng the _ ood m om] t]m]g suppo_'t to the
back of the hood. Remove and set aside the mom]th]g
suppoi't _]th sc_'e_ s %_" ]ate_" hi sta]]ation. DO NOT
DISCARD.
* Rein ove tape an d park] n g m ate_ia] i]'om the hood an d
a]] supplied pa_'ts.
8
Installation Preparation
PARTS PROVIDEDI ,oc"ate th e p_'ts p_cked "_i th the h ood.
Duct Transition
with Damper
Wood Supportwith Original Screws
(__ Heat Lamp(2with 48" models}
2 Stainless Steel Grease Filters(3filters with 48"models)
Allen WrenchFor Implement Rods
OOOO2 Implement Rods and 4 Stand-offs
2 Grease Filter Trays(3 supports with 48"models,}
PACKAGE] x_c_te _m_dch ecl<
COlitel't IS. ScI'e_,k S
sho_l'l _(tH_l size.
2 (3/16"thollow wall anchorswith screws to secure hood
to the wall atthe bottom
4_ 4 Phillips head screws tosecure the transition to the
hood outlet on the top
2 flat washersforwa!l anchors
-7
4 screws to secure the wood
support to the wallPOZIDRIV3
6 Phillips head screws to _ _ I safety screw and loci<secure hood to the wood _ (_ washer, to secure thesupport: (2 secured to blower: (screw is markedwood supportt with red paintt
9
mnstaJiation mnstructions
ISTEP 11DETERMINE HOOD, DUCTWORK AND WiRiNG LOCATIONS
• []se a level to drm_ the cooktop centerlim]e location.
Drm_ the lim]e to ceilim]g height.
• Measm_e desired distm]ce fl'om the bottom of the
hood to the cookh]g sm'fhce_ 30" mh]. to 36" max.
Note: If you are installing the hood with duct covers, be sure to read
"Using Duct Dover Accessories" page 7. Exact installation height
may be determined by use of one or more duct covers.
* llse a ]eve] to drm_ a straight horizo]]ta] pencil line
iN]dicatim]g the bottom of the hood.
e From die (hie h]dicath]g the bottom of the hood,
measm'e ]5-3/8" up amid drm_ mmther ]im]e for the
]ocatiom] of the _ ood support. See i]]l(stratiom
FOR VERTICAL (Straight Up) DUCTING:* llse a ]eve] to drm_ a center(hie fl'om the bottom of
the hood to cei]im_g or so{]]t.
* I{ ventim_g om tile ceiling, extend tile center]ine
fbr_ ard on the cei]h]g or script.
* Locate the ce]]ter]h]e o{ a ] 0-1/2" hole om] the cei]h]___
or soflit by m easm'h]g 6" f}'om th e _ a]].
15-9/8" Support 18"
/Bottom of Hood I
i
*Depending onHoodwidth and
Installation Height.
FOR DUCTING THROUGH RFAR WALL:
* Measm'e the supplied dltct transiti(m with m() straight
run ]em(gth of duct Itsed, phts 90 ° e]bo_ height_ ]L)ra_
horizontal line oN( the _a]] intersecting the center(inc.
House Wiring Location:* The ]unctiom] box is fastened to the back of the hood
on the ri-ht side.
18-1/16"for 48" Models12-1/16"for 36" Models9-1/16"for 90" Models
ElectricalArea 18-13/16"for 48" Models
12-13/16"for 36" Models9-13/16"for 30" Models
* The recessed back side o_ the hood provides a large
area for the ]louse _ir]ng to exit the _a]] mid be
rol(ted to the rear ki]ockol(t and jm]ctio]( box.
* The location for the house _h'h]g depends on the
in sta]]ation h eigh t of th e h ood a_]d th e _ i(it h of th ehood.
* Remove jm(ction box cover mid ki]ockout, h]sta]]strah] relief.
Amtemate Knockout Locations
If the hi stall ati o_( re q u] res, th e,j m] cti oil box cm_ be
relocated from the back to the top of the hood. Rein ove
3 scre_ s_a]igi] box to top k]] ockout m] d secrete _ i thoriginal scre_ s_
* Remove junction box cover m_d knockom, h_sta]] strai_relief.
10
[nstaimation [nstmctions
ISTEP . .lz l iNSTALL HOOD ONTO WALL IMPORTANT'. Framingmustbe capabme ofsupporting up to 150 ibs.
SKIP THHSSTEP HFINSTALLING BENEATH A SOFFHTOR CABINET, GO TO STEP 2B.
+ I,ocate at ]east 2 xerfica] studs at the wood support.
+ ( e]]te_ _ the supplied _ood suppo]'t, ]eft to fight and
be]o++_ the 15-[}/8" ma]+ked line.
Support
' ' 'r_Centerli
InstaHai0n I
Space l_
+ Secm+e the _ god suppo_x to 2 o_+ mo_+e ve_+tica] studs_
usirlg at least 2 of the 4 supplied lo]]g sc]'e_s+
]IMPORTANT: Sc_+e_ s must pei] eta+ate at ]east 1-1 / 2"
hi to ve_'t] ca] st uds+ Co un te_'sim] k sc_'e_ s hi to sup]+>o_'t+
Note: The mountingscrews must remain iF+
their original shippinglocation, These screws
are positioned to engage
the keyhole slots in theback of the hood.
OriginalMountingScrewsas Shipped
mnstammTransition Onto Top of Hood
IMPORTANT: Remove
shipping tape fromdamper and check that
damper moves freely.
DuctTransition
+ [>]ace the O+aN]s]tio]] piece oveI + the hood exhaust a[](]
secm'e _ i t]] 4 sc_'e_ s p_+ovided+
+ [Ise duct tape m sea] the com]ectio]]+ Check to be sm'e
the dam pe_ +moves fl+ee]}.
Hang Hood On Wood Support+ Lift the hood a,]d hold close to the irtsta]]atio]] location.
Route house v+i]+ing thI+ough the k]]ockout aN]d imo the
+ P]ace the hood ove_ +the wood suppo_+t+ Be sm+e the
mom]th]g sc_+e_s engage the kevho]e s]ots hi the bat]+, of
the hood+
Cheek to be sm+e the h god is ]ex e] a/d cen te_+ed.
30"
to36"
Test Duct Cover Fit
Centerline ofInstallation
+ Hate duct cover(s) ove_ + the top of the hood to check
for a"a+>s+A(!just the hood up o] + (1o_]] if rmcessa_+_++
+ A(i]ust depth o[ ofigh]a] moumi_]g scre_ s i_] the
%_<><>(1support umil they p]+ot]+_,.de 1/4" fo]+v:a]+d+ This
1/4" gap "+q]] p]+o+,'ide c]ea]+a_]ce to ha]]£ the hood+
mnstammBottom Mounting Screws+ D]+i]] 1/S" pilot holes imo the t_o 1owe] +moumi_]g
ho]es+ E]]]arge, the ho]es if" the++ did m>t e]'tte] +studs to
/8 + h]selx a_/chors {of _a]] f_/stene]'s imo bottom
]10] es. ]-_e[)) o\e a[] c]) o] + sci+e_k s a[] d add J_] at _k as]) ei+s
l+x+(>xideal+ Drive sc]+e_s imo ancho_+s a_]d tightem
+ Install 4 addifio_a] screws the+gush the back of the
hood and imo the wood suppo]+t+
11
mnstaaiation mnstructions
ISTEP 2B] AJtemate Mounting MethodiNSTALL HOOD TO SOFNT OF{ BENEATH CABINETS
• The 2 x 4 studs must be located as sho_]] im] the chart,
Dh//. A. to accept moHmlt]mlg screws.
"A" "B"Centerliee to Stud Hood Width
and KeyhomeSlots At the Top
ZV48T 19-9/1if' 40"
ZV48S 23-9/1ff' 47-15/16"
ZV36T 13-9/1ff' 28"
ZV36S 17-9/1ff' 35-15/W'
ZV30T 10-9/1if' 22"
ZV30S 14-9/1ff' 29-15/W'
7-1/2"
Back of Hood
• [)]'ill l/8" pilot holes intotl/esmdsattl/elocathms
sho_m] im] the top _ie_ illustration.
mMPORTANT: Soffit framing must be capabme
of supporting up to 150 mbs.
mnstammTransition Onto Top of Hood
IN PO£TANT: Remove
s!-fipping tape from
damper and check thatdamper moves freely,
DuctTransition
• Place the O'ansition piece over the hood exhaust mid
secure _ ]th 4 scre_ s provided.
Use d_ct tape to seal the com]ect]oi]. C]/eck to be sm'e
the damper m ores f}'ee]v.
Mount Hood onto Soffit or Cabinet
Note: }[[ mom]ti_]g to the u_]de]'side of a cabi]let ",_it]/ a
EngageTopKeyholeSlots 1/4" Gap
PushBack_1_to Wall
ii
Add Shims
I If Bottoml ls Recessed
Drive mom]ti_]g scre_sinto the studs m]ti] thev
protrude 1/4". The 1/4" gap _111 provide c]earance to
e_]gage the kev]]o]e slots hi the top of the hood_
i,ift hood to insta]]atio_] positiou. Locate h<mse _]rh]g
mldro_te thro_gh thek]]ocko_t ({}'ore the back or
top of the hood).
* I,]ft hood onto mom/ting scre_s. S]]de back agah]st
the rear _ a]].
* Tigh tell 0/O _1_1 [i _1 g sere'v, s.
][MPORT_T: For additional support and to mini-
mize %bration during operation, the hood must besecured to the back wall, Use wall anchors to fasten
bottom back of bood to the wall.
12
JnstaJJation instructions
[STEP 41 CONNECT ELECTRICALISTEP 31CONNECT DUCTWORK• h_stall duct_o]&_ m_ddng com]ections in dh'ectiom_ of
ab41o]l as ]llusm_ted.
•Secm, e,joim]t s im] ductwo_'k with sheetmetal sc_'e_l s.
• Wrap a]] duct,joi m]ts wi th dl_ct tape flu" m] ai_'tigh t seal
• l]se duct tape to seal the {lange co]u]ectio]]. Reach
im_side the hood and push the dampe]" up to be sm'e itmoves {]_eel%
DuctTapeOverSeamandScrew
...... AirFi0w
Screw
DuctTapeOverPransition
Verify that power is turned off at the source.
WARNiN6: ,,h,,.se_l i th a gm m]d _li_'e, a gm m]d m I_st be pmvi deal by the
im]sta]] el'. Wh eli h oIB.se v, i_'i m'_g i s a] m]/im] m]/, be sla'e t o
I_se l I I,. app]'oved amIti-oxi da_] t corn pom] d an d a] m]/i-
m/um-to-coppe_" co]]]]ectox's.
ATTE NTJON ,e ,e,amaison m]'est pas (h_ t}pe 5 del_x ills a\'ec m] fil de
tell'e, l'im]stallatem" dolt flmHfi_" m] ci_'cuit de teH'e.
Quart d I e s ti Is de Ia m ai son so]] ten al m]/in i m]/, i1
p]'endl'e soim] d utilise]" de la pfite amioxidation
app_xmv6e pro" 111, et des com]ectem's pore"
1'a1m]/im]im]/-cl_iv_'e.
,_ Remove I] InsertPowerJunctionBox ConduitThru
Cover StrainReliefandTighten
White
C UseULListedWire Nuts
• [Ise _lh'e m]llts to com]ect im]co]]/im]_2__1"ollm]d to g1"ee]],
_l1]ire to _l hire and b]a_k to b]ack.
@ Push ]vi]'es hmLjmlction box mid _'ep]ace coven Be
sm'e ]l i]'es a_'e not pi _ch ed.
]STEP 5] iNSTALL DUCT COVERS
Note: Fo]" easier" h an d]in]g, _'em ove cm'dboa]xi in se]'t
after" film is peeled off.
Remove p]_otective fi]m _i_om d_ct cove]_s. If moire thm]
on]e duct cove_" is used, secm'e eath piece togethe]" _ith
sc_'e]l s p]xwided.
* Place the duct cove_'(s) on top of the hood.
* F_'om i_]side the hood_ secm'e the duct cove_" to the
top ]_i th the sma]] Ph]]]i ps head sc_'e_l s supp]]ed w] ththe cove]_s.
13
JnstaJJation instructions
[STEP 61 iNSTALL MOTOR
Outlet
\
AttachmentSlot
/
SpringClip
* F_'om the his]de of the hood_ slip motor" into theatta_ hme]]t slot om] the le{t_
e Rotate motor" Iq_m'(is Imti] it smq_s ira]to the sp_'im]g
clip on the Hg]]t_e Secm'e the motor to the hood _Hth the machhle
sc]'ew an (1 lock _ ash e_'. ( Sc_'ew i s m m'ke(] wi t h _'ed
AttachmentScrew
IMPORTANT:Connector ends
are designed to mate onlyone way. Match flat andround connectors as sflown.
SpringClip
• p] I_ _o]1]] ectof im]to t]/e m otol'.
[STEP ?j iNSTALL FILTERS
• Place fi] tel" (]]'i p t]'a_ s im]to the ]'em" of the hood.
!
• ]]]se_t the g_'ease fi]te_ _h]to the openh]g aN](] d_op
ira]to the t_'avs.
• To _'em ore th e fi] te_'s_ g_'asp the h am]d] e_ pl_sh the
filter" iq_ m](] lift out.
14
mnstaliation mnstructions
[STEP 8] INSTALL IMPLEMENT
e
• [Jse a fiat blade scre_ driver to install stand-offs into
the bottom o_ the hood.
• A]ig]] implement ]'od to stm]d-ot['s with the sc]'ew holetO_,_'_]'ds the inside of the hood. Secu_'e the _'od to the
stand-oil's with the supplied Allen wrench.
• Follo_ the same p_'ocedm'e (m the opposite side.
FINALIZE INSTALLATION* I_stal] the supplied imffrm'ed bulb (s).* See the (7)_,kr]]e]" S ]_'l;:lt[]ll_]_] foil" inst]'l_ctions to test
o]0ei'_]ffi ()]].
15
Note: While performing installations described in this book,
safety glasses or goggles should be worn,
t4_ M};_zog'l-_tl _/o_'_l _1_, _'_i_ ),_J_l_*_, _'_ll
Webringgoodthingsto life,
Pub.No.49-80151-2Dwg.No.164D4290P108(ND762) 5/03
General Electric Companyr.Louls_ifle KY4022,_
Printed in Italy