300ES CW Details
Transcript of 300ES CW Details
-
8/22/2019 300ES CW Details
1/20
23
300ES CurtainwDescript
Uc = 0.46*
CRF = 72
-
8/22/2019 300ES CW Details
2/20
23.02300ES Series CurtainwallGuide Specifications
General
Description
Furnish all necessary materials, labor and
equipment for the complete installation of aluminum
curtainwall framing as shown on the drawings and
specified herein.
Curtainwall framing shall be 300ES Series Cur-
tainwall as manufactured by Tubelite Inc., Walker,
Michigan. Whenever substitute products are to be
considered, supporting technical literature, samplesdrawings and performance data must be submitted
ten (10) days prior to bid in order to make a valid
comparison of the products involved.
Test reports certified by an independent labora-
tory will be submitted upon request.
Performance Requirements
Air infiltration shall not exceed 0.06 CFM/Ft2
when tested in accordance with ASTM E-283-04"Rate of Air Leakage Through Exterior Windows" at
a test pressure of 6.24 PSF.
There shall be no uncontrolled water entry when
tested in accordance with ASTM E-331-00 "Water
Penetration of Exterior Windows, Curtainwalls and
Doors by Uniform Static Air Pressure Difference" at a
The system shall have a Sound Transmission
Class (STC) rating of 32 and an Outdoor-IndoorTransmission Class (OITC) rating of 26 when tested
in accordance with ASTM E90-97, ASTM E413-87
(reapproved 1994) and ASTM E1332-90.
Products
Materials
Extrusions shall be of aluminum alloy 6063-T5
or 6063-T6 (as required), manufactured within com-mercial tolerances and free from defects impairing
strength and/or durability.
Screws, bolts and all other accessories to be
compatible with the aluminum under normal service
conditions.
Thermal barrier shall be a dual glass fiber insul-
bar crimped in place separating interior from exterior
surfaces for efficient thermal performance of door
and frame members.
Finish
All exposed framing surfaces shall be free of
scratches and other serious blemishes.
Finish to be: (architect select)
Et h d d l di d
-
8/22/2019 300ES CW Details
3/20
23.300ES Series Curtainw
Key Elevat
3
1
1 1AA
2 2AA
3 3AA
4
7
5 6 4
2
H
I
S
Outside Glazed
Inside Glazed
-
8/22/2019 300ES CW Details
4/20
23.04300ES Series CurtainwallIsometric Assembly Details - Head
P25002500
A610906610906
S403403
P25002500
A611416611416
E61086108A611406611406
E61016101
P20282028E61086108
P10941094
Inside Glazed
-
8/22/2019 300ES CW Details
5/20
23.300ES Series Curtainw
Isometric Assembly Details - Intermedia
P25042504A610906610906
A611406611406S403403
E61016101
P25042504
A610906610906
E61086108
P10941094
P20632063P25072507
P10941094E61086108
Inside Glazed
-
8/22/2019 300ES CW Details
6/20
23.06300ES Series CurtainwallIsometric Assembly Details - Sills
E61016101A611406611406
E61016101
E61016101
A611406611406
P25002500P10941094
S403403P20632063
P25072507P10941094
P25002500
A611406611406P25062506
P25052505
P12671267
Inside Glazed
-
8/22/2019 300ES CW Details
7/20
-
8/22/2019 300ES CW Details
8/20
-
8/22/2019 300ES CW Details
9/20
-
8/22/2019 300ES CW Details
10/20
-
8/22/2019 300ES CW Details
11/20
-
8/22/2019 300ES CW Details
12/20
-
8/22/2019 300ES CW Details
13/20
-
8/22/2019 300ES CW Details
14/20
-
8/22/2019 300ES CW Details
15/20
-
8/22/2019 300ES CW Details
16/20
-
8/22/2019 300ES CW Details
17/20
-
8/22/2019 300ES CW Details
18/20
-
8/22/2019 300ES CW Details
19/20
-
8/22/2019 300ES CW Details
20/20