3 Essen Denki

1
Current Voltage Voltage variation Insulation resistance Dielectric test voltage Illuminated method Ambient temperature Available colour Material Terminal Cut-out required Ingress protection 10mA to 15mA (voltage dependant) 6, 12, 24, 48, 110, 220V AC 6, 12, 24, 48V DC ±20% of operating voltage > 500 Mohms 2.5 KV AC for 1 minute Light emitting diodes controlled by electronic circuitry -25°C to +75°C Red, Amber, Green, Blue and White Thermoplastic with polycarbonate lens Touch-proof terminals with M2.5 captive screws 13.2 mm. dia IP20 (rear), IP65 (front) TECHNICAL DATA www.essendeinki.com LED MODULE PILOT LIGHTS LM13 - SERIES Excellent illumination Long life, 1,00,000 hours Low current consumption Incorporate solid-state devices Shock proof and vibration resistant Modular in construction Fine serrated lens Compact in size and can be directly connected across 220V AC supply Available in Red, Green, Amber, Blue and White colour lens with diffuser Touch-proof terminals with captive screws (IP20 protection) Characteristics Ordering code LM13( )D LM13( )D LM13( )D LM13( )D LM13( )D LM13( )D LM13( )D LM13( )D LM13( )D LM13( )D Voltage 6V 12V 24V 48V 110V 220V 6V 12V 24V 48V AC AC AC AC AC AC DC DC DC DC AC AC AC AC AC AC DC DC DC DC 6V 12V 24V 48V 110V 220V 6V 12V 24V 48V ( ) Colour : Red - R, Green - G, White - W, Amber - A, Blue - B 18.0 8.6 15.8 36.3 M13x1.0 9 All dimensions are in mm. Due to continuous improvement in products, we reserve the right to alter specifications without prior notice Note : Adaptor plate suitable for 14.5 mm. cutout is also available, ordering code is AD14 Panel cut out Ø13.0

Transcript of 3 Essen Denki

Page 1: 3 Essen Denki

CurrentVoltage

Voltage variationInsulation resistanceDielectric test voltageIlluminated methodAmbient temperature Available colourMaterialTerminalCut-out requiredIngress protection

10mA to 15mA (voltage dependant)6, 12, 24, 48, 110, 220V AC6, 12, 24, 48V DC±20% of operating voltage> 500 Mohms2.5 KV AC for 1 minuteLight emitting diodes controlled by electronic circuitry-25°C to +75°CRed, Amber, Green, Blue and WhiteThermoplastic with polycarbonate lensTouch-proof terminals with M2.5 captive screws13.2 mm. diaIP20 (rear), IP65 (front)

TECHNICAL DATA

www.essendeinki.com

LED MODULE PILOT LIGHTSLM13 - SERIES

Excellent illuminationLong life, 1,00,000 hoursLow current consumptionIncorporate solid-state devicesShock proof and vibration resistantModular in constructionFine serrated lensCompact in size and can be directly connected across 220V AC supplyAvailable in Red, Green, Amber, Blue and White colour lens with diffuserTouch-proof terminals with captive screws (IP20 protection)

Characteristics

Ordering code

LM13( )DLM13( )DLM13( )DLM13( )DLM13( )DLM13( )DLM13( )DLM13( )DLM13( )DLM13( )D

Voltage

6V

12V

24V

48V

110V

220V

6V

12V

24V

48V

AC

AC

AC

AC

AC

AC

DC

DC

DC

DC

ACACACACACACDCDCDCDC

6V12V24V48V

110V220V

6V12V24V48V

( ) Colour : Red - R, Green - G, White - W, Amber - A, Blue - B

18.0

8.6

15.8

36.3

M13x1.0

9

All dimensions are in mm.Due to continuous improvement in products, we reserve the right to alter specifications without prior notice

Note : Adaptor plate suitable for 14.5 mm. cutout is also available, ordering code is AD14

Panel cut out

Ø13.0