3 Dimensional Services Group - Prototype Metal Stamping And Assembly
description
Transcript of 3 Dimensional Services Group - Prototype Metal Stamping And Assembly
Prototype Manufacturing
Welded Assemblies * Stampings * Castings * Injection Molding * Precision Machining
200,000 Sq. ft. Of Manufacturing
Over 250 skilled employees
Over 100 Stamping Presses
53 CNC Machines
23 Laser Cutting Systems 3 and 5 Axis
15 robotic Weld arms, 39 Manual weld stations
MIG, TIG, and Laser Welding
15 Spot Weld Machines
15 Injection Mold Presses
Manufacture Of parts and
Complete Robot Welded Assembly done in-house
Our ExpertisePrototype and short run production for metal stampings, welded assemblies, plastic injection molding, castings, and high precision cnc machining
Urgent Requests And Quick Turn Around Projects
Around The Clock Service 24/7
Equipment & Technical Expertise
Experience and ability to get the job done right and on time
Founded in 1992
privately owned small business
4 locations: Headquartered in Rochester Hills MiEuropean Sales and Engineering Center in Germany
Total operation is over 200,000 Square feet
Employ over 250 skilled employees
Known for our ability to react to all situations
About 3-Dimensional
Metal Stampings
Over 100 Stamping Presses
Large Metal Stamping
13 presses over 1000 tons
Large Metal Stamping
13 presses over 1000 tons
Seating Assemblies
Manufacture of parts and assembly
Metal Stampings
3-4 Week Delivery
Production Intent Robotic welding
15 robotic weld arms
Complete Weld Study
Production Weld Wire
Production Gas Mixture
Cut + Etch on each Weld
Certified Weld Inspector approval for Assembly
( NAMeS ) Weld Software is used to verify all welds
NAMeS Weld Software
15 robotic weld arms
Robotic welding
Robotic Weld Sub-Assy
Chassis Assemblies
40-50 Components : 4-6 week delivery
Banjo Axle Assembly
Stampings, Castings, Robotic Welding, Machining
Frame / module assembly
2 Gantry weld systems
Full truck frame
Stamping, Laser Cutting, Robotic Welding: 200 part numbers
Spot Welding
15 Spot Weld Machines
(15 ) 5-Axis Lasers ( 8 ) 3-Axis Lasers
Laser Cutting
CNC Machining
53 CNC machines : up to 11’ x 17’ Travel
Machined Castings
All high precision machining done in-house
High Definition Stampings
Presses up to 7000 Tons
CNC Tube Bending
Y-Axis Feed for Minimal Material Thinning
High Pressure Hydroforming
Up to 58,000 PSI
In-House Capability
Tooling Design and ManufacturingCNC Machining3-Axis Laser Cutting5-Axis Laser CuttingMetal StampingCNC Tube BendingHydroformingProduction Intent Robotic MIG WeldingSpot WeldingInjection MoldingPatterns and CastingsWire EDM
Alan Peterson - Vice President PH (248) [email protected]
3-Dimensional Sales & Engineering Contacts
Shane Denton - Senior Sales EngineerPH (248) 852-1333 Cell (248) [email protected]