7/29/2019 2SD1651C

1/4

2SD1651C

No.7086-1/4

Color TV Horizontal DeflectionOutput Applications

Features High speed.

High breakdown voltage(VCBO=1500V).

High reliability(Adoption of HVP process).

Adoption of MBIT process.

On-chip damper diode.

Specifications

Absolute Maximum Ratingsat Ta=25C

Parameter Symbol Conditions Ratings Unit

Collector-to-Base Voltage VCBO 1500 V

Collector-to-Emitter Voltage VCEO 800 V

Emitter-to-Base Voltage VEBO 6 V

Collector Current IC 6 A

Collector Current (Pulse) ICP 15 A

Collector Dissipation PC3.0 W

Tc=25C 60 W

Junction Temperature Tj 150 C

Storage Temperature Tstg --55 to +150 C

Electrical Characteristics at Ta=25C

RatingsParameter Symbol Conditions

min typ maxUnit

Collector Cutoff Current ICBO VCB=800V, IE=0 10 A

Collector Cutoff Current ICES VCE=1500V, RBE=0 1.0 mA

Collector Sustain Voltage VCEO(sus) IC=100mA, IB=0 800 V

Emitter Cutoff Current IEBO VEB=4V, IC=0 40 130 mA

DC Current GainhFE1 VCE=5V, IC=0.5A 10

hFE2 VCE=5V, IC=3.5A 5 8

Collector-to-Emitter Saturat ion Voltage VCE(sat) IC=3.15A, IB=0.63A 3 V

Base-to-Emitter Saturation Voltage VBE(sat) IC=3.15A, IB=0.63A 1.5 V

Continued on next page.

SANYO Electric Co.,Ltd. Semiconductor CompanyTOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Ordering number : ENN7086

2SD1651C

Package Dimensionsunit : mm

2174A

[2SD1651C]

N1501 TS IM TA-3439

NPN Triple Diffused Planar Silicon Transistor

1 : Base2 : Collector3 : Emitter

SANYO : TO-3PMLH

21.

0

5.

0

22.

0

0.

8

20.

4

4.

0

16.03.4

2.0

2.8

2.1

5.45

5.45

0.7 0.9

3.

5

8.

0

5.6

3.1

1 2 3

Any and all SANYO products described or contained herein do not have specifications that can handleapplications that require extremely high levels of reliability, such as life-support systems, aircraft'scontrol systems, or other applications whose failure can be reasonably expected to result in seriousphysical and/or material damage. Consult with your SANYO representative nearest you before usingany SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values thatexceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or containedherein.

7/29/2019 2SD1651C

2/4

2SD1651C

No.7086-2/4

Collector-to-Emitter Voltage, VCE -- V

CollectorCurrent,IC

--A

Collector Current, IC -- A

VCE(sat) -- IC

Collector-to-Emitter

Satu

rationVoltage,

VCE(sat)--V

Collector Current, IC -- A

hFE -- IC

DCCurrentGain,

hFE

Base-to-Emitter Voltage, VBE -- V

IC -- VBE

CollectorCurrent,IC

--A

IC -- VCE

0 1 3 5 7 90 2 4 6 8

1

2

3

4

5

6

10

0.1

0.01

0.1

1.0

2

3

5

2

3

5

7

2

3

5

7

2 3 5 7 2 3 5 71.0 10

0.20 0.4 0.6 0.8 1.0 1.2

2

3

4

5

6

7

0

1

3

2

1.0

10

0.1 1.0 102 3 5 7 2 3 5 7

5

7

3

2

5

IT01908

IT01910

IT01909

IT01911

0.2A

0.05A

0.4A

0.6A

0.8A

1.0A

2.0A 1.2A1.4A

1.6A

1.8A

-40C

25

C

Ta=12

0C

IB=0

VCE=5V

VCE=5V

25C

--40

C

Ta=120

C

IC/IB=5

25C

120C

Ta=--40C

25

C

120C

Ta=

--4

0C

Continued from preceding page.

RatingsParameter Symbol Conditions

min typ maxUnit

Fall Time tf IC=2A, IB1=0.4A, IB2=--0.8A 0.3 s

Diode Forward Voltage VF IEC =6A 2 V

Switching Time Test Circuit

VRRB

VCC=200VVBE= --2V

+ +50

INPUT

OUTPUT

RL=100

100F 470F

PW=20sIB1

D.C.1% IB2

7/29/2019 2SD1651C

3/4

2SD1651C

No.7086-3/4

Ambient Temperature, Ta -- C

CollectorDissipation,PC--W

PC -- Ta

Case Temperature, Tc -- C

CollectorDissipation,PC--W

PC -- Tc

0

0

20 40 60 80 100 120 140 160

3.0

3.5

0.5

1.0

1.5

2.0

2.5

IT01916

Noheatsink

0

0

20 40 60 80 100 120 140 160

10

20

30

40

50

60

70

IT01917

Collector-to-Emitter Voltage, VCE -- V

CollectorCurrent,IC--

A

Collector-to-Emitter Voltage, VCE -- V

Reverse Bias A S O

CollectorCurrent,IC--

A

Forward Bias A S OCollector Current, IC -- A

SwitchingTime,

SWT

ime--s

SW Time -- IC SW Time -- IB2

Base Current, IB2 -- A

SwitchingTime,

SWT

ime--s

10 100 1000

0.1

1.0

10

2

3

5

7

2

3

5

7

2

3

5

2 3 5 7 2 3 5 7 2 3

IT01915

0.1

1.0

0.1

7

5

3

2

7

5

3

2

5 1.0 102 3 7 52 3 7

IT01912

1.00.1 2 3 52 3 75

IT01913

1.0

0.1

5

3

2

7

5

3

2

7

10

0.01

0.1

1.0

10

2

3

57

2

3

57

235

7

2

3

5

1.0 10 100 10003 5 72 3 5 72 3 5 72

IT01914

tstg

tf

tstg

tf

VCC=200V

IC=2A

IB1=0.4A

R load

DCoperation

1ms

10ms

300s

PT=

100s

L=500H

IB2= --1AICP=15A

IC=6A PC=60W

VCC=200V

IC/IB1=5

IB2/IB1=2

R load

Tc=25C

Single pulseTc=25C

Single pulse

7/29/2019 2SD1651C

4/4

2SD1651C

No.7086-4/4

Specifications of any and all SANYO products described or contained herein stipulate the performance,characteristics, and functions of the described products in the independent state, and are not guaranteesof the performance, characteristics, and functions of the described products as mounted in the customer'sproducts or equipment. To verify symptoms and states that cannot be evaluated in an independent device,the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and allsemiconductor products fail with some probability. It is possible that these probabilistic failures couldgive rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,or that could cause damage to other property. When designing equipment, adopt safety measures sothat these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.In the event that any or all SANYO products(including technical data,services) described orcontained herein are controlled under any of applicable local export control laws and regulations,such products must not be exported without obtaining the export l icense from the authorit iesconcerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic ormechanical, including photocopying and recording, or any information storage or retrieval system,or otherwise, without the prior written permission of SANYO Electric Co., Ltd.

Any and all information described or contained herein are subject to change without notice due toproduct/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is notguaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rightsor other rights of third parties.

This catalog provides information as of November, 2001. Specifications and information herein are subject

to change without notice.

PS