2EZ12D5
-
Upload
raul-andres -
Category
Documents
-
view
212 -
download
0
Transcript of 2EZ12D5
-
7/28/2019 2EZ12D5
1/4
Silicon 2 Watt Zener Diode
MicrosemiScottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1Copyright 20037-12-2003 REV 0
S C O T T S D A L E D I V I S I O N
2EZ3.6D5 thru 2EZ200D5
DESCRIPTION APPEARANCE
The 2EZ3.6D5 thru 2EZ200D5 series of axial-leaded 2.0 watt Zenersprovides voltage regulation selections with 5% tolerances from 3.6 to 200volts in a DO-41 plastic package size. Other Zener voltage tolerances arealso available by changing the suffix number to the tolerance desired suchas 1 and 2 for tighter tolerances or 10 for wider tolerance. These plasticencapsulated Zeners have moisture classification of Level 1 with no drypack required and are also available in various military equivalentscreening levels by adding a prefix identifier as also described in theFeatures section. They may be operated at high maximum dc currents orfull power rating with adequate heat. Microsemi also offers numerous otherZener products to meet higher and lower power applications.
DO-41 orDO-204ALPlastic
IMPORTANT: For the most current data, consult MICROSEMIs website: http://www.microsemi.com
FEATURES APPLICATIONS / BENEFITS
Zener voltage available 3.6 V to 200 V
Standard voltage tolerances are plus/minus 5%with a 5 suffix and 10 % with 10 suffix identification
Tight tolerances available in plus or minus 2% or1% with 2 or 1 suffix respectively
Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANSare available by adding MQ, MX, MV, or MSPprefixes respectively to part numbers.
Surface mount equivalents available asSMBJ2EZ3.6D5 to SMBJ2EZ200D5 in the DO-
214AA package, or SMBG2EZ3.6D5 toSMBG200D5 in the DO-215AA package
Regulates voltage over a broad operating current andtemperature range
Wide selection from 3.6 to 200 V
Flexible axial-lead mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method 1020
Withstands surge stresses
High specified maximum current (IZM) whenadequately heat sunk
Moisture classification is Level 1 per IPC/JEDECJ-STD-020B with no dry pack required
MAXIMUM RATINGS MECHANICAL AND PACKAGING Power dissipation at 25
C: 3.0 watts (also see
derating in Figure 1).
Operating and Storage temperature: -65C to
+150C
Thermal Resistance: 45C/W junction to lead at
3/8 (10 mm) lead length from body, or 105C/W
junction to ambient when mounted on FR4 PCboard (1oz Cu) with 4 mm
2copper pads and track
width 1 mm, length 25 mm
Steady-State Power: 2 watts at TL < 60oC 3/8 inch(10 mm) from body, or 1.19 watts at TA = 25
C
when mounted on FR4 PC described for thermalresistance (also see Figure 1)
Forward voltage @200 mA: 1.2 volts (maximum)
Solder Temperatures: 260C for 10 s (max)
CASE: Void-free transfer molded thermosettingepoxy body meeting UL94V-0
TERMINALS: Leads, tin-lead plated solderable perMIL-STD-750, method 2026
POLARITY: Cathode indicated by band where diodeis to be operated with the banded end positive withrespect to the opposite end for Zener regulation.
MARKING: Part number
TAPE & REEL option: Standard per EIA-296 (addTR suffix to part number)
WEIGHT: 0.4 grams
See package dimensions on last page
http://www.microsemi.com/http://www.microsemi.com/ -
7/28/2019 2EZ12D5
2/4
Silicon 2 Watt Zener DiodeS C O T T S D A L E D I V I S I O N
2EZ3.6D5 thru 2EZ200D5
ELECTRICAL CHARACTERISTICS @ 25oC
NOMINAL ZENERVOLTAGE(Note 2)
MAXIMUM ZENER IMPEDANCE(Note 3)
MAXIMUMREVERSECURRENT
MAXIMUM
RATEDZENER
CURRENT@ 100
oC
MAXIMUMSURGE
CURRENT(Note 4)
VZ @ IZ ZZT @ IZT ZZK @ IZK IR @ VR IZM IZSM
MICROTYPE
NUMBER(Note 1)
VOLTS mA OHMS OHMS mA A VOLTS mA A
2EZ3.6D52EZ3.9D52EZ4.3D52EZ4.7D52EZ5.1D5
3.63.94.34.75.1
13912811610698
5.05.04.54.53.5
400400400550600
1.01.01.01.01.0
8030205.05.0
1.01.01.01.01.0
504468434386356
4.64.44.13.33.5
2EZ5.6D52EZ6.2D52EZ6.8D52EZ7.5D52EZ8.2D5
5.66.26.87.58.2
89.580.573.566.561
2.51.52.02.02.3
500700700700700
1.01.01.00.50.5
5.05.05.05.05.0
2.03.04.05.06.0
324292266242220
3.33.12.92.662.44
2EZ9.1D52EZ10D52EZ11D52EZ12D52EZ13D5
9.110111213
555045.541.538.5
2.53.54.04.55.0
700700700700700
0.50.250.250.250.25
3.03.01.01.00.5
7.07.68.49.19.9
200182166152138
2.22.01.821.661.54
2EZ14D52EZ15D52EZ16D52EZ17D52EZ18D5
1415161718
35.733.431.229.427.8
5.57.08.09.010
700700700750750
0.250.250.250.250.25
0.50.50.50.50.5
10.611.412.213.013.7
130122114107100
1.431.331.251.181.11
2EZ19D52EZ20D52EZ22D52EZ24D52EZ27D5
1920222427
26.325
22.820.818.5
1111121318
750750750750750
0.250.250.250.250.25
0.50.50.50.50.5
14.415.216.718.220.6
9590827668
1.051.00.910.830.74
2EZ30D52EZ33D5
2EZ36D52EZ39D52EZ43D5
3033
363943
16.615.1
13.912.811.6
2023
253035
10001000
100010001500
0.250.25
0.250.250.25
0.50.5
0.50.50.5
22.525.1
27.429.732.7
6055
504743
0.670.61
0.560.510.45
2EZ47D52EZ51D52EZ56D52EZ62D52EZ68D5
4751566268
10.69.89.08.17.4
4048556075
15001500200020002000
0.250.250.250.250.25
0.50.50.50.50.5
35.838.842.647.151.7
3936322927
0.420.390.360.320.29
2EZ75D52EZ82D52EZ91D52EZ100D52EZ110D5
758291100110
6.76.15.55.04.5
90100125175250
20003000300030004000
0.250.250.250.250.25
0.50.50.50.50.5
5662.269.276.083.6
2422201817
0.270.240.220.200.18
2EZ120D52EZ130D52EZ140D5
2EZ150D52EZ160D5
120130140
150160
4.23.83.6
3.33.1
325400500
575650
450050005500
60006500
0.250.250.25
0.250.25
0.50.50.5
0.50.5
91.298.8106.4
114121.6
151413
1211
0.160.150.14
0.130.12
2EZ170D52EZ180D52EZ190D52EZ200D5
170180190200
2.92.82.62.5
675725825900
7000700080008000
0.250.250.250.25
0.50.50.50.5
130.4136.8144.8152
1110109
0.120.110.100.10
NOTES: 1. Suffix 1 indicates +/-1% tolerance, suffix 2 indicates +/-2% tolerance, suffix 5 indicates +/-5% tolerance. Suffix 10 indicates +/-10%,no suffix indicates +/-20%.
2. The VZ is measured after allowing a 90 second stabilization period when mounted with a 3/8 minimum lead length from body.Ambient temperature, TA = 25
oC (+8
oC/-2
oC).
3. The Zener impedance is derived from 60 cycle ac voltage resulting from an ac current having an rms value equal to 10%of the dc Zener current (IZT or IZK ) is superimposed on IZT or IZK.
4. Maximum Surge Current IZSM is a non-recurrent maximum peak reverse surge with a pulse width of 8.3 ms.
MicrosemiScottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2Copyright 20037-12-2003 REV 0
-
7/28/2019 2EZ12D5
3/4
Silicon 2 Watt Zener Diode
MicrosemiScottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3Copyright 20037-12-2003 REV 0
S C O T T S D A L E D I V I S I O N
2EZ3.6D5 thru 2EZ200D5
2EZ 110 D 5
GRAPHS
TL, Lead temperature (oC) at 3/8 from body
or TA on FR4 PC Board
FIGURE 1POWER DERATING CURVE
PACKAGE DIMENSIONS
TA on FR4 PC board
TL
2 WATTMOLDEDZENERDIODE
DEVICE
% TOLERANCE
NOMINALZENER
VOLTAGE
Pd,
Maxim
umRatedPowerDissipation(mW)
-
7/28/2019 2EZ12D5
4/4
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.
http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/