2D AND 3D APPLICATIONS AND DIGITAL MODELS
Transcript of 2D AND 3D APPLICATIONS AND DIGITAL MODELS
EN
2D AND 3D APPLICATIONS AND DIGITAL MODELSfor autoSIM-200
EN
www.smctraining.com • [email protected]
ES 3D APPLICATIONS for autoSIM-200
autoSIM-200 has a series of 3D applications from real equipment, ready to be run in the system.
Program, control and monitor the simulation of the automated process.
autoSIM-200 or autoSIM-200 ADVANCED is required.
DIGITAL MODELS
Program from the PLC programming environment.
Simulate your program on the digital model.
autoSIM-200 or autoSIM-200 ADVANCED, version 4.08 or higher, is required.
3D APPLICATIONS FAS-200
FEATURES• Compatibility with simulation software in automation applica-
tions.• Independent window with 3D model, keypad and control com-
mands.• Access to the table of symbols for the generated program.• Access to the libraries and to the simulation panel for compo-
nents in pneumatics, electro-pneumatics, hydraulics, electro-hy-draulics and electrics.
• Access to the generated programs that control the simulation. Possibility of adding LADDER and GRAFCET programs.
FAS-201FAS-202FAS-203FAS-204FAS-205FAS-206FAS-207FAS-208FAS-209
FAS-210FAS-211FAS-212 FAS-213FAS-214FAS-215FAS-216FAS-220
DIGITAL MODEL
3D APPLICATIONS FAS-200 SPECIAL EDITION - INDUSTRY 4.0
MAP-201MAP-202
MAP-203MAP-204
** REQUIRED SOFTWARE NO INCLUDED
REMEMBERSMC International Training recommends keeping
autoSIM-200 and autoSIM-200 ADVANCED software updated.Download the latest version www.smctraining.com
train
ing
PLC’s PROGRAMMING PLC’s PROGRAMMING SOFTWARE(**)SOFTWARE(**)
Options:Options:
SIEMENSSIEMENS
• • TIA PORTAL Version 14 or higher.TIA PORTAL Version 14 or higher.• • PLCSim Advanced Version 1PLCSim Advanced Version 1 or higher. or higher.
ALLEN-BRADLEY (ROCKWELL)ALLEN-BRADLEY (ROCKWELL)
• • Connected Components Workbench - Connected Components Workbench - Version 12 Version 12 or higher. or higher.
3D APPLICATIONS FMS-200 3D APPLICATIONS MAP-200FMS-201FMS-202FMS-203FMS-204FMS-205FMS-206FMS-207FMS-208
MAP-201MAP-202MAP-203MAP-204MAP-207
3D APPLICATIONS MAS-200 3D APPLICATIONS AUTOMATE-200
AUTOMATE-200A
3D APPLICATIONS IPC-200IPC-201C
MAS-201MAS-202MAS-203MAS-204MAS-205
train
ing
DISPLAY2 3
45
6
1General display screen
1
3D environment2
Motion controls in the 3D environment
3
Digital machine indicator4
Simulation status (Accessible/Not accessible)
5
Control, visualization and simulation commands
6
www.smctraining.com • [email protected]
ES2D APPLICATIONS for autoSIM-200
autoSIM-200 features 2D simulations of the basic technology trainers to be run in the system.
Design and simulate your pneumatic, hydraulic and electrical circuits.
AutoSIM-200 or autoSIM-200 ADVANCED, version 4.08 or higher, is required for use.
PRATICAL ACTIVITY
Access the proposed activity statement from the simulation screen.
HOW TO ORDER
* other quantities, please consult.
The contents of this document may change without notice.
** programming software required (Siemens PLCs TIA PORTAL Version 14 or higher / Siemenes PLCSim Advanced Version 1 or higher / Connected Components Workbench Version 12 or higher).
3D APPLICATIONS INCLUDED No. LICENCES* 1 YEAR PERMANENT
FAS-201, FAS-202, FAS-203, FAS-204, FAS-205, FAS-206, FAS-207,FAS-208, FAS-209, FAS-210, FAS-211,
FAS-212, FAS-213,FAS-214, FAS-215, FAS-216,FAS-220
1 SAI1971-1 SAI2536
8 SAI1971-8 SAI2537
16 SAI1971-16 SAI2538
FAS-200 SPECIAL EDITION - INDUSTRY 4.0
1 SAI1972-1 SAI2536S
8 SAI1972-8 SAI2537S
16 SAI1972-16 SAI2538S
FMS-201, FMS-202, FMS-203, FMS-204, FMS-205, FMS-206, FMS-207, FMS-208
1 SAI1973-1 SAI2523
8 SAI1973-8 SAI2524
16 SAI1973-16 SAI2525
MAS-201, MAS-202, MAS-203, MAS-204, MAS-205
1 SAI1970-1 SAI2547
8 SAI1970-8 SAI2548
16 SAI1970-16 SAI2549
MAP-201, MAP-202, MAP-203, MAP-204, MAP-207
1 SAI1959-1 SAI2527
8 SAI1959-8 SAI2528
16 SAI1959-16 SAI2529
AUTOMATE-200A
1 SAI1968-1 SAI2530
8 SAI1968-8 SAI2531
16 SAI1968-16 SAI2532
IPC-201C
1 SAI1969-1 SAI2533
8 SAI1969-8 SAI2534
16 SAI1969-16 SAI2535
2D APPLICATION PACK No. LICENCES* 1 YEAR PERMANENT
PNEUMATE-200, PNEUTRAINER-400, ICT-200, HYDROTRAINER-200, HYDROMODEL-200, BEMATE-200
1 SAI1958-1 SAI1957-1
8 SAI1958-8 SAI1957-8
16 SAI1958-16 SAI1957-16
PLC’s PROGRAMMING SOFTWARE(**) No. LICENCES* REFERENCE
PACK STUDENT STEP 7 TIA PORTAL 20 LICENCES COMBO - 1 YEAR 20 SAI7556
CCW WORKBENCH - DEVELOPER MED SOFTWARE 1 SAI7590
DIGITAL MODEL(1 YEAR LICENSE)**
SIEMENSALLEN-
BRADLEYDIGITAL MODEL
(1 YEAR LICENSE)**SIEMENS
ALLEN-BRADLEY
MAP-201 SAI1960 SAI1961 MAP-203 SAI1964 SAI1965
MAP-202 SAI1962 SAI1963 MAP-204 SAI1966 SAI1967
1
2D APPLICATIONSBEMATE-200
2D APPLICATIONSHYDROMODEL-200
2D APPLICATIONSICT-200
2D APPLICATIONSPNEUMATE-200
2D APPLICATIONSHYDROTRAINER-200
2D APPLICATIONSPNEUTRAINER-400
www.smctraining.com • [email protected]
www.smctraining.com
IT-SIMULA-V1-1