CX-R810 MAGNESIUM and MULTI MATERIAL METALWORKING FLUID CONCENTRATE

APPLICATIONS CX-R810 metalworking fluid is a premium blended metalworking fluid designed for machining magnesium, ferrous and other non ferrous materials. CX-R810 can be used in individual machines or central systems Materials: Magnesium, Aluminium, Carbon Steels, High Speed Steel, Cast Steels, Alloy Steels, Tool Steel, Bronze, Brass and Copper Duty Range: For moderate to heavy-duty operations FEATURES & BENEFITS

MAGNESIUM COMPATIBILITY* - Laboratory tests confirmed that CX-R810 machining magnesium produces extremely low levels of hydrogen evolution and reduces magnesium dust creation MIX STABILITY - Excellent mix stability, even in the presence of high levels of magnesium ions EXCELLENT LUBRICITY – CX-R810 can perform a variety of machining applications on magnesium, aluminium and steel CLEANLINESS - Good mix cleanliness, even in the presence of magnesium GOOD CORROSION CONTROL - Good corrosion control on magnesium, ferrous and other nonferrous metals GOOD RANCIDITY CONTROL - Contains a microbial control package to extend fluid life for long lasting, trouble-free performance LOW FOAMING - Can be used in high turnover, high pressure applications WASTE TREATABLE - Compatible with most conventional waste treatment methods OPERATOR FRIENDLY - Mild to skin - Easy to mix * - OTHER PRECAUTIONS: When using this product on magnesium or alloys of magnesium, proper safety procedures must be followed. These include: 1) providing ample flooding of the part with the metalworking fluid; 2) minimizing magnesium chip accumulation in machines, sumps and tanks; 3) promptly separating magnesium chips from the fluid; and 4) providing ventilation for hydrogen gas. For more information on machining of magnesium with water based metalworking fluids please refer to the "Hydro Magnesium" website, http://www.hydromagnesium.com. Refer to the section; “Machining Magnesium”. Additional information can be found on the International Magnesium Association brochure “Safe Machining and Handling of Magnesium Chips, Turnings & Grindings”. Please refer to the "Publication and Video" section of their website, http://www.intlmag.org/brochures.aspx .

RECOMMENDED STARTING DILUTIONS FOR INDUSTRIAL USE ONLY Use between 5.0% (1:20) and 10.0% (1:10) for machining and grinding ferrous and nonferrous metals including magnesium and magnesium alloys. CX-R810 is to be mixed with water for use (add concentrate to water). Add no other substances to the concentrate or mix unless approved by CIMCOOL® Technical Services. For concentration analysis, use the MI Titration Procedure, Non- Solvent Titration Procedure, Total Alkalinity Titration Procedure, or Refractometer. TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

1. Physical state: Liquid

2. Appearance and odor: Clear / Chemical

3. Colors available: Undyed

4. Solubility in water: 100% Miscible

5. Specific gravity, (H2O = 1): 0.98

6. Boiling point, °F (°C): Not applicable

7. Freezing point, °F (°C): < 0 (<-18)

8. pH, concentrate: 9.3

9. pH, 5.0% mix, typical operating conditions: 9.2

10. Total chlorine/chloride, wt%, calculated: 0/< 50 ppm

11. DEA, DCHA, NIRITE, PCB, PCP, PCT, TCDD, TRIAZINE - None

PACKAGING

Available in 20 litre pails, 200 litre drums, and bulk containers. REFRACTOMETER FACTOR = 1.2 - Multiply the scale reading obtained on your CIMCOOL® Metalworking Fluid or other acceptable refractometer by the Refractometer Factor to obtain the mix concentration as a percentage. NOTE:

Remove gross contaminants from the sample mix before testing.

Before testing the sample, calibrate the refractometer so that it reads 0.0 with water.

For additional information concerning CX-R810, refer to its MSDS or contact CIMCOOL®

Technical Service Support at tss@cincinnatimilacron.net. Reprints/updates of this Product Information Flyer (PIF) can be found on our web site, www.cincinnatimilacron.net or from your CM Fluid Technology representative. This product is sold by Cincinnati Milacron Fluid Technology Asia Pacific, a Milacron Marketing Company, Cincinnati, Ohio 45209. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.