27_Mean of Sample3 1006 3
2
rptSample# Individual Sample Fuel Mixture Composition Data fuel mixture : Lubricating and Motor Oils sample # : 27/Mean of Sample 3-1006-3 from : Eisenberg, W.C., K. Taylor, and G.J. Lepinske, Polynuclear Aromatic Hydrocarbons: A Decade of Progress, M. Cooke and A.J. Dennis, eds., Battelle Press, Columbus, OH. pp. 231-248, 1988 weight number of compound class carbon # compound percent dat a poi nts fl ag (s ) Diaromatics (Except Naphthalenes) 13 Fluorene 1.2E-03% 1 4 Polynuclear Aromatics 14 Anthracene 9.5E-04% 1 4 14 Phenanthrene 4.7E-03% 1 4 16 Fluoranthene 2.0E-04% 1 4 16 Pyrene 2.5E-04% 1 4 18 Benz(a)anthracene 6.8E-05% 1 4 18 Chrysene 3.2E-04% 1 4 20 Benzo(a)pyrene 2.3E-05% 1 4 20 Benzo(b)fluoranthene 4.3E-05% 1 4 20 Benzo(k)fluoranthene 1.9E-05% 1 4 22 Benzo(g,h,i)perylene 8.5E-05% 1 4 flag(s) 4 Data was converted using formula WT%=ug/g*10-4. Page 1 of 1 file:////timber/data/AEHS/Netfile1/AEHS.com Old Site/AEHS.c...s.com/publications/tphtables/27_Mean_of_Sample3-1006-3.html6/11/2010 9:29:27 AM
-
Upload
aehsfoundation -
Category
Documents
-
view
214 -
download
0
Transcript of 27_Mean of Sample3 1006 3
8/9/2019 27_Mean of Sample3 1006 3
http://slidepdf.com/reader/full/27mean-of-sample3-1006-3 1/1
ptSample#
ndividual Sample Fuel Mixture Composition Datafuel mixture : Lubricating and Motor Oils
sample # : 27/Mean of Sample 3-1006-3
from : Eisenberg, W.C., K. Taylor, and G.J. Lepinske, Polynuclear AromaticHydrocarbons: A Decade of Progress, M. Cooke and A.J. Dennis, eds., BattellePress, Columbus, OH. pp. 231-248, 1988
weight number of
ompound class carbon # compound percent data points flag(s)
aromatics (Except Naphthalenes) 13 Fluorene 1.2E-03% 1 4
olynuclear Aromatics 14 Anthracene 9.5E-04% 1 4
14 Phenanthrene 4.7E-03% 1 4
16 Fluoranthene 2.0E-04% 1 4
16 Pyrene 2.5E-04% 1 4
18 Benz(a)anthracene 6.8E-05% 1 4
18 Chrysene 3.2E-04% 1 4
20 Benzo(a)pyrene 2.3E-05% 1 4
20 Benzo(b)fluoranthene 4.3E-05% 1 4
20 Benzo(k)fluoranthene 1.9E-05% 1 4
22 Benzo(g,h,i)perylene 8.5E-05% 1 4
g(s)
4 Data was converted using formula WT%=ug/g*10-4.
Page 1 of 1
le:////timber/data/AEHS/Netfile1/AEHS.com Old Site/AEHS.c...s.com/publications/tphtables/27_Mean_of_Sample3-1006-3.html6/11/2010 9:29:27 AM
