26-1200 Series · 26-12 6 t - 3 16 2 - 076 basic series body material diaphragm/ o-ring seat...
Transcript of 26-1200 Series · 26-12 6 t - 3 16 2 - 076 basic series body material diaphragm/ o-ring seat...
TESCOM 26-1200 Series dome loaded, high flow pressure reducing regulator is externally loaded with 6000 psig / 414 bar maximum inlet and outlet pressures. The 26-1200 Series offers three orifice sizes and Cv ratings, balanced main valve, and available external sensing.
Applications• Rocket engine testing
• Fueling
• Facilities supply
Features and Benefits• Diaphragm sensed and highly sensitive
• Modular construction for easy service
• External sensing available for improved accuracy
• Balanced main valve increases seat life
• Mounts in any position
• Low droop and lockup
SpecificationsFor other materials or modifications, please consult TESCOM.
OPERATING PARAMETERS Pressure rating per criteria of ANSI/ASME B31.3
Maximum Inlet Pressure3600 and 6000 psig
248 and 414 bar
Outlet PressureTo maximum inlet
Design Proof Pressure150% maximum rated operating
LeakageBubble-tight
Flow CapacityCv = 3.3, 6.0, or 12.0*
MEDIA CONTACT MATERIALSBody
303, 316 Stainless Steel
SeatCTFE or Vespel®
DiaphragmBuna-N or Viton®
O-RingsBuna-N or Viton®
Back-up RingsTeflon®
Remaining Parts300 Series Stainless Steel
OTHERCleaning
CGA 4.1 and ASTM G93
Teflon®, Tefzel®, Vespel®, and Viton® are registered trademarks of E.I. du Pont de Nemours and Company.
*A secondary pressure drop due to the outlet cross-hole can significantly affect the rated flow capacity. Contact TESCOM for flow curve data when outlet pressure is less than 1000 psig / 69.0 bar.
Cv = 12.0
Cv = 3.3
Cv = 6.0
PILOT PRESSURE REGULATOR
EXTERNAL REFERENCE LINE
26-1200 PROCESS PRESSURE REGULATOR
TYPICAL APPLICATION
www.tescom.com
26-1200 SeriesRegulators - Pressure Reducing D26120540X012
2
26-1200 Series Regulator Specifications
*For extended temperature applications, consult TESCOM.
Cv = 12.0
OPERATING PARAMETERS Pressure rating per criteria of ANSI/ASME B31.3
Maximum Inlet Pressure6000 psig / 414 bar
Operating Temperature*-15°F to 165°F / -26°C to 74°C
Flow CapacityCv = 12.0
MEDIA CONTACT MATERIALSBody
316 Stainless Steel
SeatVespel®
DiaphragmViton®
O-RingsViton®
Back-up RingsTeflon®
ValveNitronic 60
Remaining Parts300 Series Stainless Steel
OTHERWeight
Stainless Steel: 60 lbs / 27.2 kg
Cv = 6.0
OPERATING PARAMETERS Pressure rating per criteria of ANSI/ASME B31.3
Maximum Inlet PressureVespel: 6000 psig / 414 bar
CTFE or Tefzel®: 3600 psig / 248 bar
Operating Temperature*Buna-N: -40°F to 165°F / -40°C to 74°C
Viton®: -15°F to 165°F / -26°C to 74°C
Flow CapacityCv = 6.0
MEDIA CONTACT MATERIALSBody
316 Stainless Steel
SeatCTFE or Vespel®
DiaphragmBuna-N or Viton®
O-RingsBuna-N or Viton®
Back-up RingsTeflon®
Connecting Rod17-4 Stainless Steel
ValveNitronic 60
Remaining Parts300 Series Stainless Steel
OTHERWeight
Stainless Steel: 40 lbs / 18.1 kg
Cv = 3.3
OPERATING PARAMETERS Pressure rating per criteria of ANSI/ASME B31.3
Maximum Inlet PressureStainless Steel Body:
6000 psig / 414 bar
Operating Temperature*-40°F to 165°F / -40°C to 74°C
Flow CapacityCv = 3.3
MEDIA CONTACT MATERIALSBody
303 or 316 Stainless Steel
SeatCTFE or Vespel®
DiaphragmBuna-N
O-RingsBuna-N
Back-up RingsTeflon®
GasketCTFE
Retaining Ring15-7 Stainless Steel
Valve Cap17-4 Stainless Steel
Remaining Parts300 Series Stainless Steel
OTHERWeight
Stainless Steel: 25 lbs / 11.3 kg
3
26-1200 Series Regulator Drawings
All dimensions are reference & nominal Metric [millimeter] equivalents are in brackets
Cv = 12.0 - 1" [25.4] ORIFICE
Cv = 3.3 - 1/2" [12.7] ORIFICE
Cv = 6.0 - 5/8" [15.9] ORIFICE
4
For more information on how to read flow curves, please refer to the Flow Curves and Calculations document (debul2007x012) in the TESCOM catalog or on www.tescom.com.
26-1200 Series Regulator Flow ChartO
UT
LET
PR
ES
SU
RE
- ps
ig [
bar]
FLOW RATE - SCFM [SLPM] Nitrogen
0 900[25,485]
1800[50,970]
P1 = 6000 psig [414 bar]
60004500[310]
45003000[207]
6000
450030001500[103]
6000
2700[76,455]
3600[101,940]
4500[127,425]
5400[152,910]
6300[178,395]
1500[103]
3000[207]
4500[310]
6000[414]
26-1221-3161 CurvesModel No. 26-126T-3162-076
Cv = 3.3
5
For more information on how to read flow curves, please refer to the Flow Curves and Calculations document (debul2007x012) in the TESCOM catalog or on www.tescom.com.
26-1200 Series Regulator Flow Charts
OU
TLE
T P
RE
SS
UR
E -
psig
[ba
r]
FLOW RATE - SCFM [SLPM] Nitrogen
0 5000[141,584]
P1 = 6000 psig [414 bar]
6000
60004500
4500 and 600030001500[103]
4500[310]
3000[207]
10,000[283,168]
15,000[424,752]
1000[69.0]
2000[138]
3000[207]
4000[276]
5000[345]
6000[414]
7000[483]
OU
TLE
T P
RE
SS
UR
E -
psig
[ba
r]
FLOW RATE - SCFM [SLPM] Nitrogen
0 10,000[283,168]
20,000[566,336]
30,000[849,504]
40,000[1,132,672]
P1 = 6000 psig [414 bar]
6000
6000
4500 and 6000
4500[310]
45003000[207]
30001500[103]
1000[69.0]
2000[138]
3000[207]
4000[276]
5000[345]
6000[414]
7000[483]
Model No. 26-126T-3162-076Cv = 6.0
Model No. 26-1261-2163-083Cv = 12.0
The curves above were generated using analytical methods - error is estimated at ±10%
6
26-1200 Series Regulator Part Number Selector
Repair Kits, Accessories & Modifications may be available for this product. Please contact TESCOM for more information.
Example for selecting a part number:
Cv = 3.3
26-12 2 1 - 3 16 1
BASICSERIES BODY MATERIAL LOADING METHOD INLET AND OUTLET
PORT TYPEDOME PORT PORT SIZE ORIFICE SIZE
26-12 2 – 303 Stainless Steel 6 – 316 Stainless Steel
1 – External 1 – SAE2 – NPTF3 – MS33649
1/4" MS33649 1/4" NPTF 1/4" MS33649
12 – 3/4" 16 – 1"
1 – 1/2" 12.7 mm
Cv = 6.0
26-12 6 T - 3 16 2 - 076
BASICSERIES
BODY MATERIAL
DIAPHRAGM/ O-RING SEAT TEMPERATURE INLET AND OUTLET
PORT TYPEDOME PORT
INLET AND OUTLET PORT SIZE
INNER VALVE SIZE
MOD. NUMBER
26-12 6 – 316 Stainless Steel
A – Buna-N B – Buna-N D – Buna-N E – Viton®
T – Viton®
V – Viton®
W – Viton®
Vespel® SP1
Vespel® SP21
CTFE
Vespel® SP1
CTFE
Vespel® SP21
Tefzel®
-40°F to 165°F -40°C to 74°C -40°F to 165°F -40°C to 74°C -40°F to 165°F -40°C to 74°C -15°F to 300°F -26°C to 149°C -15°F to 165°F -26°C to 74°C -15°F to 300°F -26°C to 149°C -15°F to 165°F -26°C to 74°C
1 – SAE 2 – NPTF 3 – MS33649
1/4" MS33649 1/4" NPTF 1/4" MS33649
12 – 3/4" * 16 – 1" 20 – 1-1/4" SAE or
MS only
2 – 5/8" 15.9 mm
076
*3/4" ports reduce overall Cv to 5.0
MANDATORY FOR Cv = 6.0
Cv = 12.0
26-12 6 1 - 2 16 3 - 083
BASICSERIES BODY MATERIAL LOADING METHOD INLET AND OUTLET
PORT TYPEDOME PORT
INLET AND OUTLET PORT SIZE SENSE TYPE MODEL NUMBER
26-12 6 – 316 Stainless Steel 1 – External 1 – SAE 2 – NPTF 3 – MS33649
1/4" MS33649 1/4" NPTF 1/4" MS33649
16 – 1" 20 – 1-1/4"
3 – Internal 4 – External
083
MANDATORY FOR Cv = 12.0 MODEL
WARNING! Do not attempt to select, install, use or maintain this product until you have read and fully understood the TESCOM Safety, Installation and Operation Precautions.
D26120540X012 © 2014 Emerson Process Management Regulator Technologies, Inc. All rights reserved. 09/2014.Tescom, Emerson Process Management, and the Emerson Process Management design are marks of one of the Emerson Process Management group of companies. All other marks are the property of their respective owners.
www.tescom.com