10 Series2510 & 2510H

Branson_TRAC_10Series_090518.indd 1 9/17/18 11:21 AM

From Horses to Hobby Farm

Whether you’re raising horses or heirloom tomatoes,

the 10 series compact tractor, the newest in the

Branson Tractor family, is prefect for you. This sleek

utility tractor features a 25-HP Branson diesel engine.

It’s perfect for both large landscape jobs as well as

working in tight spaces around a hobby farm.

Branson Tractors are designed with dependability in

mind by our best at Branson Manufacturing of South

Korea, a leader in the field of agricultural equipment

with over fifty years experience. So, you can rest

assured in knowing you’re getting a quality built

tractor, assembled right here in the United States at

our plants in Georgia, Oregon, and Texas.

TRULY WORRY FREE

BRANSON TRACTORS

BACKED BY A

6-YEAR LIMITED WARANTY

Two-Year Bumper-to -bumper Warranty & a 4-year

engine and drive train warranty (6-years or up to

2,000 hours, whichever is first)

See our dealer for complete warranty information.

Branson_TRAC_10Series_090518.indd 2 9/17/18 11:21 AM

Clean Power

The 2510 engine is built by Branson.

It meets and exceeds all EPA Tier 4

regulations. They run clean and quiet

and do not need a DPF Filter, DOC, or

SCR to achieve this

Low Profile

The 10 Series tractors are only 88”

tall at the top of the roll bar with 13”

of ground clearance. This unit is very

maneuverable in tight spaces

Comfort for the Ride

Drive in comfort with the 10 Series

Tractor. The wide platform gives you

the legroom you need, while the deluxe

adjustable flip-up seat is comfortable for

the whole ride

Easy Maintenance

Maintenance on the 10 Series is

easier than ever with its removable

radiator screen and easy access engine

compartment

Built-To-Last

One piece metal hood raised by dual

gas struts secured with a positive lock

latch. Powder coat finish prevents UV

damage to the paint, bringing longevity

to the look of the unit. Steel, unlike

fiberglass or plastic, will not crack in

cold climates

Heavy Metal, Heavy Duty

Cast Iron rear housing, transmission

and front axle are built-to-last.

That’s because ductile cast iron

is the strongest and best housing

manufactured, making this tractor one

of the heaviest in its class. Look for cast

iron

ROPS

Standard on the 10 Series is our

foldable roll-over protective structure

(ROPS). Not only does it protect the

operator, the structure folds easily

so you can store it in just about any

garage

Deluxe Comfort, Easy to Use.Perfect Tractor, No Matter What the Job

Branson_TRAC_10Series_090518.indd 3 9/17/18 11:21 AM

Dimensions

• Wheelbase: 60”

• Length: 106”

• Width: 45”

• Height with ROPS: 88”

• Height with folded ROPS: 60”

• Ground clearance: 13”

• Wheelbase: 60”

• Weight: 1810 lbs.

Fold down ROPS

3-Range Transmission

Loader Control Valve with Float Position

Wet Disc Brakes

When you think of Branson tractors, one word comes to mind -

Dependability. That’s because Branson has been building solid tractors

for over 50-years. With eco-friendly, tier 4 diesel engines, these tractors

are perfect for any job, big or small. With Loader and Backhoe options,

these tractors can tackle everything.

Eco-Friendly, built-to-last

Branson_TRAC_10Series_090518.indd 4 9/17/18 11:21 AM

Industrial, Agricultural, or Turf Tires available

Hydrostatic Steering, fingertip ease

Steel Hood, Fenders with Powder Coat Finish

1314 lb. Lift Capapcity to Max Lift Height (88 in)

Skid-Steer Quick Connect Bucket (50 in) • Optional Bolt-on Cutting Edge• Optional Pallet Forks (1250 lb cap)

Branson_TRAC_10Series_090518.indd 5 9/17/18 11:21 AM

Hydro-Max Transmission

Smooth, quiet and easy to operate. The

engine RPM automatically increases or

decreases as you move the forward or

reverse foot pedals, cruise control is

standard.

Exclusive to the Branson 2510H

Three Range Transmission

Dual Pumps for Smooth Operation

The 10 Series tractors come with dual

hydraulic pumps, one for steering and

one for the loader and 3-point hitch,

assuring fingertip control no matter

how hard the loader and rear 3 point

hitch is being used.

Features

1

4

87

2

5

9

3

6

10

1. Pin-type telescoping hitch stabilizer bars2. Hitch Flow Control3. Optional Bolt-on heavy duty cutting edge4. Skid steer quick attach bucket5. Pallet fork Attachment (optional) (1250 lb cap)6. Hitch Position Control and 4WD lever7. Dual Hydraulic Pumps8. Differential Lock Lever9. Recessed grease fitting with pin boss10. 3 Range Hydrostatic transmission or 9 speed manual transmission

Branson_TRAC_10Series_090518.indd 6 9/17/18 11:21 AM

FRONT END LOADER (BL100)

Max Lift Height in. 88.3Depth of attachment (to back of inner shell)

in. 18.3

Clearance w/ Attachment level

in. 83.1 Height of attachment in. 18.9

Clearance w/ Attachment Dumped

in. 68.9Depth of attachment (to Pivot pin)

in. 23.1

Max Reach Height in. 15.5Lift capacity to full height @ Pivot Pin

lbs. 1314

Max Dump Angle degrees 43Breakout Force @ Ground level, pivot pin

lbs. 1960

Reach w/ Attachment on Ground

in. 58.3Relief Valve Setting (loader control valve)

psi 2276

Attachment Rollback Angle

degrees 38Lift Cylinders (Bore x Rod)

in. 1.77 x 1.18

Digging Depth Below Grade

in. 4.2Bucket Cylinders (Bore x Rod)

in. 1.97 x 1.18

Overall Height in Carry Position

in. 45.7 Bucket Mount-TypeStandard Pin-On;

Skid Steer Optional

Bucket Width in. 50

BACKHOE (BH100)

Digging Depth in. 76Stablizer Spread (Down Position)

in. 52

Reach from Center Line of Swing Pivot

in. 104Stablizer Spread (Up Position)

in. 12

Loading Height (Bucket at 60º) in. 63 Undercut in. 12

Swing Arc degrees 150Bucket Cylinder Digging Force

lbs. 2050

Transport Height (Maximum) in. 70Dipper Stick Cylinder Digging Force

lbs. 1256

Transport Overhang in. 36Hydraulic PressureRequirements

psi 2050

Bucket Rotation degrees 180

Attachment Specifications

Ready for Any Job

Whether you’re working on a small

hobby farm or raising livestock, 10

Series tractors are perfect for any job.

Featuring a Category 1 three-point

hitch, as well as a pin-type 3-point

hitch stabilizer, hydraulic remotes, and

mid-mount PTO these tractors make it

easy to attach whatever implement is

needed for the job

Attach and Go

The 10 Series tractors feature loaders

with a skid steer system and quick

attach; so whether you need a pallet

fork or a bucket, getting ready for the

job is quick-and-easy

On the Level

Branson loaders feature built-in bucket

level indicators, eliminating the guess

work, helping make the job easier from

the start

Branson_TRAC_10Series_090518.indd 7 9/17/18 11:21 AM

2510 2510H

TRANSMISSION

Type Mechanical Hydrostatic

No. of Ranges 3 3

Gear Shifting (F&R) 9F / 9R Hydrostatic / 3R

Travel Speed (F&R) MPH 0.69 - 9.5 0 - 11.0

PTO

Type Transmission PTO (over running clutch)

Speed (RPM) RPM 540 / 960

Power PTO hp 20 18

HYDRAULIC SYSTEM

Type Position

3-Point Hitch Category 1 / Position

Lift Capacity @ Lift Point lbs 1500

Lift Capacity @ 24” past lift point lbs 975

Steering Pump Flow - GPM @ 2800 RPM 4.8 (cc)

Main Pump Flow - GPM @ 2800 RPM 3.4 (cc)

TIRE OPTIONS Front Rear

Agricultural Tires 6-12-4 9.5-16-6

Industrial Tires 23 x 8.5-12 12x16.5-6

Turf Tires 23 x 8.5-12-4 33x12.50x16.5

2510 2510H

ENGINE

Model A1100N2 A1100N2

Type Vertical, 4 Cycle, Water Cooled, Diesel

Combustion System Swirl Chamber

Aspiration Naturally

Engine Output / HP (KW) @ Rated RPM 24 (17.6)

Engine RPM 2600

No. of Cylinders 3

Bore x Stroke mm 78x82

Displacement cc 1175

Displacement cubic in 71.7

Compression Ratio 21:1

Type of Air Cleaner Dry Filter Elements

Fuel Tank Capacity gal 6.08

MISC

Steering Hydrostatic

Clutch Dry, Single

Battery 12V

Brakes Wet Disc

Rollover Protection System (ROPS) height 60”

Specifications

Learn more at bransontractor.com

Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas. Contact your local Branson dealer for more information.

Branson Machinery LLC2100 Cedartown Highway

Rome, GA 30161Printed in the USA • September 2018

Branson_TRAC_10Series_090518.indd 8 9/17/18 11:21 AM