CERTIFICATECertified Passive House Component

Passive House InstituteDr. Wolfgang Feist64283 Darmstadt

GermanyComponent-ID 0885wi03 valid until 31st December 2018

www.passivehouse.com

Category: Window FrameManufacturer: FANZOLA SNC,

Rosta,Italy

Product name: EVO NULL 68

This certificate was awarded based on the followingcriteria for the cool, temperate climate zone

Comfort UW = 0.79 ≤ 0.80 W/(m2 K)UW ,installed ≤ 0.85 W/(m2 K)with Ug = 0.70 W/(m2 K)

Hygiene fRsi=0.25 ≥ 0.70

CERTIFIEDCOMPONENTPassive House Institute

cool, temperate climate

phAPassive House

efficiency class phE phD phC phB phA

FANZOLA SNCVia Stazione 4, 10090 Rosta, ItalyT + 39 0119540148 |B info@fanzola.it | Í http://www.fanzola.it |

20 o

C

18 o

C

16 o

C

14 o

C

12 o

C

10 o

C

8 o

C

6 o

C

4 o

C

2 o

C

0 o

C

-2 o

C

-4 o

C

-6 o

C

-8 o

C

-10 o

C

Calculation model Isothermal

Description

Timberframe with installation frame of dense PIR-foam (λ = 0.086 W/(mK)) and insulation of cork (λ =0,040 W/(mK)). Integrated drainage through installation system. Pane thickness: 49 mm (6,36/16/4/16/6,36),rebate depth: 18mm, spacer: Swisspacer ULTIMATE

Explanation

The window U-values were calculated for the test window size of 1.23 m× 1.48 m with Ug = 0.70 W/(m2 K).If a higher quality glazing is used, the window U-values will improve as follows:

Glazing Ug = 0.70 0.64 0.58 0.52 W/(m2 K)↓ ↓ ↓ ↓

Window UW = 0.79 0.74 0.70 0.65 W/(m2 K)

Transparent building components are classified into efficiency classes depending on the heat lossesthrough the opaque part. The frame U-Values, frame widths, thermal bridges at the glazing edge, andthe glazing edge lengths are included in these heat losses. A more detailed report of the calculationsperformed in the context of certification is available from the manufacturer.

The Passive House Institute has defined international component criteria for seven climate zones. Inprinciple, components which have been certified for climate zones with higher requirements may alsobe used in climates with less stringent requirements. In a particular climate zone it may make senseto use a component of a higher thermal quality which has been certified for a climate zone with morestringent requirements.

Further information relating to certificationcan be found on www.passivehouse.com and passipedia.org.

2/4 EVO NULL 68

www.passivehouse.com

Frame width U-value frame Ψ -panel edge Temp. Factorbf Uf Ψg fRsi=0.25

Framevalues mm W/(m2 K) W/(m K) [-]

Top (to) 89 0.73 0.031 0.76

Side (s) 89 0.73 0.031 0.76

Bottom (bo) 92 0.72 0.032 0.76

Mullionflying

(fm) 136 0.79 0.029 0.74

Spacer: SWISSPACER Ultimate Secondary seal: Polysulfide

Validated installations

Insulated formwork blocks

UWall = 0.15 W/(m2 K)

Ψinstall W/(m K)Top 0.006Side 0.006Bottom 0.015

UW ,installed = 0.81 W/(m2 K)

Timber frame

UWall = 0.13 W/(m2 K)

Ψinstall W/(m K)Top 0.020Side 0.020Bottom 0.026

UW ,installed = 0.85 W/(m2 K)

EIFS

UWall = 0.13 W/(m2 K)

Ψinstall W/(m K)Top 0.005Side 0.005Bottom 0.011

UW ,installed = 0.81 W/(m2 K)

3/4Component-ID: 0885wi03

www.passivehouse.com

www.passivehouse.com