2367 PB HomeBoosterPumps
Transcript of 2367 PB HomeBoosterPumps
7/28/2019 2367 PB HomeBoosterPumps
http://slidepdf.com/reader/full/2367-pb-homeboosterpumps 1/2
Wilo-PB series.
Home Booster Pumps.
7/28/2019 2367 PB HomeBoosterPumps
http://slidepdf.com/reader/full/2367-pb-homeboosterpumps 2/2
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
[m3 /h]
[l/m]
0 2 4 6 8 10 12 14 16
0 1 2 3 4
[Gal/m]
PB-088EA
PB-200EA
PB-400EA
20
18
16
14
12
10
8
6
4
2
0
70
60
50
40
30
20
10
0
Ft m
T o t a l H e a d
Flow Rate
Technical Data
PB-088EA PB-200EA PB-400EA
Approved fluids: Clean water with no solids
Power source: 230V, 50Hz, Single phase
Max. flowrate: 2.4m3 /h 3.2m3 /h 4.5m3 /h
Max. head: 9m 16m 20m
Rated speed (rpm): 2900
Fluid temperature: 0°C to +80°C 0°C to +90°C 0°C to +80°C
Ambient working Up to +40°C temperature:
Max. working pressure: 3bar 4bar 6bar
Flow switch ‘on’ flowrate: 0.12m3 /h 0.1m3 /h 0.1m3 /h
Degree of protection IP44 IP44 IP44(Motor):
Motor insulation class: B
Voltage tolerance: ±10%
Performance Curves
E D S 2 3 6 7 . 0
3 1 1
PB-088EA (50Hz)
Application• Pressure boosting• Storage tank or mains fed water
Advantages• Stable water pressure due to Flow
switch inside of casing
• Inline installation
• Auto/Off/Manual optional operation
• Motor with in-built Thermal Protectionfor safety
• Motor protection IP44• Low motor operation temperature
• Corrosion-resistant using catephoresisedcoated pump housing
Wilo-PB Series
Home Booster PumpsThe “home booster” pumps of the Wilo-PB series are suitable for boosting (hot and cold water) where ever low pressure is aproblem in the home. The PB pumps are made using a catephoresised cast iron pump housing giving them resistance againstcorrosion. PB pumps should not be used to pump water containing solids and should NOT be used to pump drinking water. Localregulations relating to water and electrical installations to be observed. Precautions against water damage should be taken if unitsare installed inside buildings.
PB-200EA (50Hz)
Application• Pressure boosting• Storage tank or mains fed water
Advantages• Stable water pressure due to Flow
switch inside of casing
• Inline installation
• Auto/Off/Manual optional operation
• Motor with in-built Thermal Protectionfor safety
• Motor protection IP44• Low motor operation temperature
• Corrosion-resistant using catephoresisedcoated pump housing
Wilo Engineering Ltd, Unit B1, Corcanree Business Park, Dock Road, Limerick, IrelandT: +353 (0)61 227 566 F: +353 (0)61 229 017 E: [email protected] www.wilo.ie
PB-400EA (50Hz)
Application• Pressure boosting• Storage tank or mains fed water
Advantages• Stable water pressure due to Flow
switch inside of casing
• Inline installation
• Auto/Off/Manual optional operation
• Motor with in-built Thermal Protectionfor safety
• Motor protection IP44• Low motor operation temperature
• Corrosion-resistant using catephoresisedcoated pump housing