23 Louvolite Maestro® vertical blind system Hardware...
Transcript of 23 Louvolite Maestro® vertical blind system Hardware...
Louvolite Maestro® vertical blind system Hardware specification
Your Maestro® Distributor:
Part
Cod
e: S
2502
02-M
2
9.01
.13
• Maestro® is a smooth running, robust and reliable vertical blind system designed to last for many years
• Made using quality materials such as stainless steel and aluminium, with corrosion resistant finishes
• British manufactured to the highest standards for over 20 years
• 10 year life cycle tested giving reliability and durability
• Tracks are supplied up to 5000mm wide (16’ 3”) in a smooth powder coated finish
• Tracks come with fully enclosed end caps, which house the operating cord and chain
• UV stabilised prime plastics used to guard against ultra violet degradation
• Direct drive tilt operation for positive control when opening and closing the louvers
• Self-aligning carrier trucks have limit stops, providing louvre rotation to 1850
• Carrier Truck spacing controlled by stainless steel spacer links for extra durability
ArCHiTeCTS
SPeCifierS
ConTrACTorS
Vertical Blinds should be manufactured using the Louvolite Maestro® System with aluminium headrail 48mm x 28mm and include Louvolite wheeledcarriertruckswithstabilisingfinsandUVstabilisedself-aligningpeghooks.TheoperatingchainshouldbeNo6sizemetaltoensurereliableperformance.Thebracketsusedshouldbemadefrommildsteel,zincplatedandpowdercoatedandbesuitablefortoporfacefixing.The material used for the vertical louvre will be creased and punched so that a Louvolite UV stabilised hanger – also with a hole – can be stitched orweldedintothetopofthelouvre.
General applicationsVertical blinds incorporating the Maestro® headrail system provide a contemporary and extremely practical commercial installation andareavailablefromapprovedmanufacturersworldwide.Itisarobustandreliablesystemthathasbeenspecifiedforover20years.Thesystemiseasilyfittedandprovidesanextremelyefficientmethodoflightcontrol.Alargerangeofattractiveflameretardantfabrics,andsomefeaturinganti-glareSPC®andblackoutcoatingsmaketheseblindstheidealchoiceforprojectslargeorsmall.Thefabricsaredesignedspecificallyforwindowblinds.
Headrail TheMaestro®aluminiumheadrailextrusionismadefromprimealuminiumandisavailableinawhitepowdercoatedfinish,whichmakesitcorrosionresistant.Bracketsarezincplatedorpowdercoatedandmanufacturedwithastrengtheningcreaseforincreasedstrengthandsafety.
Carrier TrucksToensureapositiveandsmoothoperationwithintheheadrail,allcarriersaremanufacturedusingprimequalityplasticmaterials.ThisalsoprovidesdurabilityandprotectionfromembrittlementandUVrays.Thegearsinthecarriertrucksthatrotatethelouvresareself-aligningwithlimitstops.Thisrestrictslouvrerotationto185º.Whichallowsanefficientclosurewithoutstrainonthemechanism.Thespacingbetweenthecarriertrucksiscontrolledbyhigh-gradestainlesssteelspacerlinks.Thestandardspacingiseither77mmfor89mmlouversor115mmfor127mmlouvres,althoughalternativespacingoptionsareavailable.UVstabilisedlouvrehangersaremanufacturedusingNylonNo.6plastic.
operationOperationisbyeitherNo6sizechainoratiltanddrawwandcontrol.Maestro®tracksaresmoothrunningandrobust.Thecomponentsaremadeinaluminium,primeplasticorstainlesssteel.Thedesignofthecomponentsminimisesdamagecausedbyoperatormisuse.
MaintenanceAlloftheMaestro®componentsaremanufacturedusingaluminium,plasticorstainlesssteel.Theydonotpresentanycorrosionproblemsinnormalenvironments.Thesystemhasbeendesignedforasmoothoperation,togetherwitharigiditytoprolongthewindowblind’s workinglife.Anydamagewhichdoesoccur,cannormallyberectifiedonsite.
LouvresAvailableas89mmor127mmwidth.Alllouvresareweightedandinterlinked,frontandbackwithballand‘C’clipconnectors.
Manufactured in the UK
Mae
stro
® V
erti
cal
Maestro® Bracket Dimensions
B ( 1 : 1 )
89
39
B ( 1 : 1 )40
89
12
53
face fix Brackets
Top fix Brackets (screw)
Top fix Brackets (spring)
Shallow frame face fix Brackets
A ( 1 : 1 )
87
23
112
31
90(110)110 (150)
31(12)
51
89(127)
110 (150)90(110)
23
32
41
53 (53)12
40
B ( 1 : 1 )
73
162
138
89
B ( 1 : 1 )
7
36
38
3Min mm
B ( 1 : 1 )
146
89
210
53
235
Adjustable face fix Brackets
extension Top fix Brackets
Side fix Brackets
Pelmet Brackets
B ( 1 : 1 )
185
210
121
53
89
142 - 185 (142 - 185)
Min 3mm
7(7)
36
38
73(54)
146 (127)
53
(4)
89(127)
(31)
89(127)
89(127)
89(127)
89(127)
105 (125)
130 (130)
170 - 210 (170-210)
A ( 1 : 1 )
87
23
112
31
A ( 1 : 1 )
87
23
112
31
Key89mmLouvreDimensions127mmLouvreDimensions
Shaped Blind options
Bunching options and Stacking Distances
ANGLED TOP ANGLED BOTTOM
SHAPED STEPPED BOTTOM EDGE
TOP AND BOTTOM TRACKS (minimum drop of 500mm) Multiple connected tracks
ANGLED TOP ANGLED BOTTOM
SHAPED STEPPED BOTTOM EDGE
TOP AND BOTTOM TRACKS (minimum drop of 500mm) Multiple connected tracks
ANGLED TOP ANGLED BOTTOM
SHAPED STEPPED BOTTOM EDGE
TOP AND BOTTOM TRACKS (minimum drop of 500mm) Multiple connected tracks
ANGLED TOP ANGLED BOTTOM
SHAPED STEPPED BOTTOM EDGE
TOP AND BOTTOM TRACKS (minimum drop of 500mm) Multiple connected tracks
ONE WAY BUNCH SPLIT BUNCH
CENTRE BUNCH TWO BLINDS ON ONE TRACK
ONE WAY BUNCH SPLIT BUNCH
CENTRE BUNCH TWO BLINDS ON ONE TRACK
ONE WAY BUNCH SPLIT BUNCH
CENTRE BUNCH TWO BLINDS ON ONE TRACK
OneWay 225mm (83/4”) for 1st metre(3‘3”)widthofblind.175mm(7”)foreachadditional metre
190mm(71/2”)for1stmetre(3‘3”)widthofblind.115mm (41/2”) for each additional metre
Split 225mm (8 3/4”) for 1st metre(3‘3”)widthofblind.175mm(7”)foreachadditional metre
135mm (51/2”) for 1st metre(3‘3”)widthofblind.55mm (21/4”) for each additional metre
Centre 165mm (61/2”) for 1st metre(3‘3”)widthofblind.165mm (61/2”) for each additional metre
115mm (41/2”) for 1st metre(3‘3”)widthofblind.115mm (41/2”) for each additional metre
Bunching 89mm(31/2”)Louvres 127mm(5”)Louvres
Angled Top Angled Bottom
Shaped Stepped Bottom Edge
One Way Bunch
Split Bunch
Centre Bunch
Maestro® Vertical Components
Bracket options
Maestro® Headrail Product specification100% aluminiumDimensions: 48mm (1 3/4”) x 28mm (1 1/8”)Lengths: 5m (5.5 yard) maximumColour: white
Tilt RodProduct specificationAluminium
Headrail Section
Control EndProduct specificationColour: white
Idle EndProduct specificationColour: white
end Sets
Available in nickel plated brass, stainless steel or plastic. The pitch of the operating chain is designed to provide a smooth and silent operation. Each chain system allows for child safe operation where required.
Product specificationPlastic - colour: white, grey, beige and black.Metal - colour: Silver, Gold, Black
Chain
Self-aligning carrier trucks with stainless steel spacer links.89mm, 127mm
Product specificationColour: white
Carrier Trucks
Product specificationColour: white
Maestro® Monocommand®
Maestro® Vertical Blind Systemexploded diagrams:
fabric Louvre
Channel Section
Carrier Truck
OperatingWand
Stabilising Chainwith C Clip
end Caps
Louvre inserts
CHIL
D SA
FE CHILD
SAFE •
CordWeights
Available in Standard 80g, Teardrop 76g
Product specificationColour: white or light grey
Cord Tidies
Double Cord & Chain Tidy
Product specificationColour: white, brown or black
BallastWeight
Ballast Weights, Moulded, Compact89mm, 127mmProduct specificationColour: white, beige or black
Ballast Weights, Moulded, Plain 89mm, 127mmProduct specificationColour: white
Ballast Weights, Moulded, Standard 89mm, 127mmProduct specificationColour: white or beige
LouvreBallastWeights
Single Slotted Hole, Plastic89mm, 127mmProduct specificationColour: white or black
Double Slotted Hole, Plastic 89mm, 127mm Product specificationColour: white
Louvre inserts
127mm Pelmet Bracket
20
55
105 (125)Pelmet brackets, 89mm or 127mmProduct specificationColour: silver
Dimensions: 53mm (2”) x 20mm (3/4”) x 105mm (4 1/4”) for 89mm (31/2”) louvres. 53mm (2”) x 20mm (3/4”) x 125mm (5 1/4”) for 127mm (5”) louvres
20
51
75(90)Side fix brackets, 89mm or 127mmProduct specificationMild steel, zinc plated and powder coated Colour: white
Dimensions: 20mm (3/4”) x 51mm (2”) x 75mm (3”) for 89mm (31/2”) louvres. 20mm (3/4”) x 51mm (2”) x 90mm (31/2”) for 127mm (5”) louvres
20
130
Extension Top fix bracketsProduct specificationMild steel, zinc plated and powder coated Colour: white or silver
Dimensions: short arm 20mm (3/4”) x 130mm (51/8”), long arm 20mm (3/4”) x 165mm (61/2”)
20 145 - 185
53(170-210)
Adjustable face fix brackets, 145mm - 185mm or 170mm - 210mmProduct specificationMild steel, zinc plated and powder coated Colour: white
Dimensions: short arm 20mm (3/4”) x 53mm (21/8”) x 145 - 185mm (51/2” x 71/4”), long arm 20mm (3/4”) x 53mm (21/8”) x 170 - 210mm (611/16” x 81/4”)
25 53
10
Top fix brackets, springProduct specificationMild steel, zinc plated and powder coated Colour: white
Dimensions: 25mm (1”) x 10mm (3/8”) x 53mm (21/8”)
25 45
10
Top fix brackets, screwProduct specificationMild steel, zinc plated and powder coated Colour: white
Dimensions: 25mm (1”) x 10mm (3/8”) x 45mm (13/4”)
32
45 90(110) Shallow frame face fix brackets, 89mmor127mmProduct specificationMild steel, zinc plated and powder coated Colour: white
Dimensions: 45mm (11/2”) x 32mm (11/4”) x 90mm (31/2”) for 89mm (31/2”) louvres45mm (11/2”) x 32mm (11/4”) x 110mm (43/8”) for 127mm (5”) louvres
51
2090(110)
Face fix brackets, 89mm or 127mmProduct specificationMild steel, zinc plated and powder coated Colour: white
Dimensions: 20mm (3/4”) x 51mm (2”) x 90mm (31/2”) for 89mm (31/2”) louvres 20mm (3/4”) x 51mm (2”) x 110mm (43/8”) for 127mm (5”) louvres
2 Brackets required for blinds up to 1 metre width,1 further bracket required for every additional metre.
fabric Louvre
CordWeights
face fix
Shallow frame face fix
Top fix (spring)
Top fix (screw)
Headrail Section
Carrier Truck
Stabilising Chainwith C Clip
end Caps
Louvre inserts
Cord Tidy
BallastWeight
Bracket options
face fix
Shallow frame face fix
Top fix (spring)
Top fix (screw) Bracket options
48mm (13/4”)
28
mm
(11/8
”)
Headrail profile:
WithMonocommandWandOperation
WithCord&ChainOperation