220.2 - FF CEILING LAYOUT - Mintek · 2015-10-30 · out of shop drawings. the design shown on this...
1
RECEPTION AND WAITING AREA GF-02 PASSAGE GF-04 OFFICE GF-05 INDUCTION ROOM GF-08 KITCHEN GF-07 VAULT GF-06 FEMALE LOCKERS GF-09 MALE LOCKERS GF-10 FEM. ABL. GF-15 MALE ABL. GF-14 PARA. ABLUTIONS GF-12 FIRE EQUIPMENT STORAGE GF-11 STORAGE GF-13 PASSAGE GF-04 INDUCTION/MEETING ROOM GF-03 SECURITY MONOTORING ROOM FF-02 SECURITY OFFICE FF-01 PASSAGE FF-04 SERVER ROOM FF-03 W2 W1 W1 W1 W1 W1 W1 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W1 RECEPTION AND WAITING AREA GF-02 PASSAGE GF-04 KITCHEN GF-07 VAULT GF-06 FEMALE LOCKERS GF-09 FIRE EQUIPMENT STORAGE GF-11 MALE LOCKERS GF-10 INDUCTION ROOM GF-08 OFFICE GF-05 FEM. ABL. GF-15 MALE ABL. GF-14 PARA. ABLUTIONS GF-12 STORAGE GF-13 New Concrete surface bed on 200 micron dpm layer on compacted ground fill. New Concrete surface bed on 200 micron dpm layer on compacted ground fill. -510 0 -510 W3 New Ramp @1:12 min slope. Feature Wall: refer to drw. no. MGH15047-600 new canopy above B1 B1 B1 B1 W3 600 4 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 600 5 B1 B1 B1 SECURITY MONOTORING ROOM FF-02 SECURITY OFFICE FF-01 PASSAGE FF-04 SERVER ROOM FF-03 NEW WALL FINISHES W1 Finish:Matt 300x600mm Ceramic Tile Supplier: ItalTile Tile Name: Ti Stone Carbon Natural Code: NA W2 W3 W4 Finish:Matt 300x600mm Ceramic Tile Supplier: ItalTile Tile Name: "Feature Wall" Code: NA General paint colour Dulux Code. 30YY 78/018 Name: Neutral 38. Finish:1 coat primer, 2 coats of trade 100 low sheen for drywalls and non plastered brickwork surfaces, weatherguard light textured exterior coating for plastered brickwork surfaces. EDGE TRIMS Type: Flat line Lestello LFA 100 Size:10x8mm Finish: 94 Brushed Effect NEW CEILINGS CEILING: 2740 AFFL Flush plastered ceiling 6.5mm Gypsum board with skim coat finish fixed to new 38x50mm brandering fixed to existing Concrete Soffit BULKHEAD: 2550 AFFL Flush plastered ceiling 6.5mm Gypsum board with skim coat finish fixed to new 38x50mm brandering SHADOWLINE CORNICE: 50mm Shadowline cornice by CAPCO OSA NEW FLOOR FINISHES TILES CARPET: Supplier: ItalTile Tile name:TiStone Bianco Pol Code: Supplier: BelgoTex : Carpet name: Equiniox Aquirius CARPET: 600X600mm Ceramic tiles TILES Supplier: ItalTile Tile name: Uptown White Code: 600X600mm Ceramic tiles Finish: Standard Finish: textured/Non-slip Custom TRIMS: Supplier: Genisis Type: Aluminium Access Ramp Code: RAA104 Finish: 81 Matt Silver STAIR NOSING: Supplier: Genisis Type: Stainless steel nosing with Silicone Carbide Insert Code: NRS360 Finish: 16 Black ACCES FLOOR: 200mm AFFL Supplier: To be determined Type: To later specification Code: To later specification Finish:To later specification WINDOW COVERINGS BLINDS LUXAFLEX 25mm ALUMINIUM VENETIAN. COLOUR:OLD PEWTER, (To fit inside window reveals:Confirm measurements on site) B1 GENERAL NOTES: THIS DRAWING MUST NOT BE SCALED. DIMENSIONS AND LEVELS ARE TO BE CHECKED. THE LATTER ON SITE, BY THE CONTRACTOR BEFORE COMMENCEMENT OF ANY WORK OR SETTING OUT OF SHOP DRAWINGS. THE DESIGN SHOWN ON THIS DRAWING IS COPYRIGHT AND REMAINS THE PROPERTY OF THE ARCHITECT. QUALITY OF MATERIALS AND WORKMANSHIP TO COMPLY WITH THE LATEST RELEVANT CODES AND SPECIFICATIONS OF SANS AND SABS AND THE MINIMUM STANDARDS OF STANDARD PRELIMINARIES (JBCC) AND MODEL PREAMBLES FOR TRADES (2008-ASQS) AND WERE APPLICABLE. PROJECT SPECIFICATIONS. ALL BOUNDARIES, DIMENSIONS AND LEVELS ARE TO BE CHECKED ON SITE BEFORE CONSTRUCTION AND ANY DISCREPANCIES ARE TO BE REPORTED TO THE ARCHITECT. FOR THE PURPOSE OF COORDINATION, ALL RELAVANT PARTIES MUST CHECK THIS INFORMATION PRIOR TO IMPLEMENTATION. ANY DISCREPANCIES TO BE REPORTED TO THE ARCHITECT. DO NOT SCALE THIS DRAWING. PARTIAL SERVICE: ANY DISCREPANCIES WITH SITE OR OTHER INFORMATION IS TO BE ADVISED TO THE ARCHITECT AND DIRECTION OR APPROVAL IS TO BE SOUGHT BEFORE THE IMPLEMENTATION OF THE DETAIL. CONTRACTOR TO PROVIDE SAMPLES OF FINISHES FOR ARCHITECTS APPROVAL. WHERE DEVIATIONS TO SPECIFICATIONS ARE CONTEMPLATED THE CONTRACTOR MUST REQUEST APPROVAL FROM THE ARCHITECT. Revision No Project No Date Drawings Project Drawn Scale Project Address (Farm name/Portion no): Klipfontein/203-IQ. Randburg, City of Johannesburg ARCHITECTS: PRAKASEN GOVENDER SACAP : 5278 SIGNATURE: Purpose of Drawing: Cell: 083 777 2627 • Tel: (031) 584 7200 • Fax: (031) 584 7203 Email: [email protected] • www.pgaarchitects.co.za Drawing No STAMPS AND NOTES: TENDER MURRAY HARDMAN SACAP: CANT 24750393 CLIENT SIGNATURE DATE: / / 1 : 50 21-Oct-15 5:08:27 PM MGH - 15047 220-230 MINTEK PROPOSED NEW INTERIOR REFURBISHMENTS - MINTEK GATEHOUSE CEILING & FINISHES LAYOUTS JDV 1 : 50 220.1 - GF CEILING LAYOUT 1 1 : 50 220.2 - FF CEILING LAYOUT 2 1 : 50 230.1 - GF WALL & FLOOR FINISHES 3 1 : 50 230.2 - FF WALL & FLOOR FINISHES 4 Revision Schedule Revision Number Revision Date Revision Description
Transcript of 220.2 - FF CEILING LAYOUT - Mintek · 2015-10-30 · out of shop drawings. the design shown on this...
RECEPTION AND WAITING AREA
GF-02 PASSAGE
GF-04
OFFICE
GF-05
INDUCTION ROOM
GF-08
KITCHEN
GF-07
VAULT
GF-06
FEMALE LOCKERS
GF-09
MALE LOCKERS
GF-10
FEM. ABL.
GF-15
MALE ABL.
GF-14
PARA. ABLUTIONS
GF-12
FIRE EQUIPMENT STORAGE
GF-11
STORAGE
GF-13
PASSAGE
GF-04
INDUCTION/MEETING ROOM
GF-03
SECURITY MONOTORING ROOM
FF-02
SECURITY OFFICE
FF-01
PASSAGE
FF-04
SERVER ROOM
FF-03
W2
W1W1
W1
W1
W1
W1
W3
W3
W3
W3
W3
W3
W3W3
W3
W3
W3 W3
W3
W3
W3
W3
W3
W3
W3
W3
W3 W3
W3 W3
W3
W3W3
W3W3
W3W3W3W3
W3
W3
W3
W3
W3
W3
W1
RECEPTION AND WAITING AREA
GF-02
PASSAGE
GF-04
KITCHEN
GF-07
VAULT
GF-06
FEMALE LOCKERS
GF-09
FIRE EQUIPMENT STORAGE
GF-11
MALE LOCKERS
GF-10
INDUCTION ROOM
GF-08
OFFICE
GF-05FEM. ABL.
GF-15
MALE ABL.
GF-14
PARA. ABLUTIONS
GF-12
STORAGE
GF-13
New Concrete surface bedon 200 micron dpm layer oncompacted ground fill.
New Concrete surface bedon 200 micron dpm layer oncompacted ground fill.
-5100
-510
W3
New Ramp @1:12 min slope.
Featu
re W
all:
refe
r to
drw
. no. M
GH
15047-6
00
new canopy above
B1
B1B1 B1
W3
600 4W3
W3W3
W3
W3
W3
W3
W3W3
W3
W3
W3
W3
6005
B1
B1
B1
SECURITY MONOTORING ROOM
FF-02
SECURITY OFFICE
FF-01
PASSAGE
FF-04
SERVER ROOM
FF-03
NEW WALL FINISHES
W1
Finish:Matt
300x600mm Ceramic Tile
Supplier: ItalTile
Tile Name: Ti Stone Carbon Natural
Code: NA
W2
W3
W4
Finish:Matt
300x600mm Ceramic Tile
Supplier: ItalTile
Tile Name: "Feature Wall"
Code: NA
General paint colour Dulux Code. 30YY 78/018Name: Neutral 38.Finish:1 coat primer, 2 coats of trade 100low sheen for drywalls and non plasteredbrickwork surfaces, weatherguard lighttextured exterior coating for plasteredbrickwork surfaces.
EDGE TRIMS
Type: Flat line Lestello LFA 100Size:10x8mmFinish: 94 Brushed Effect
NEW CEILINGS
CEILING: 2740 AFFLFlush plastered ceiling 6.5mm Gypsumboard with skim coat finish fixed to new38x50mm brandering fixed to existingConcrete Soffit
BULKHEAD: 2550 AFFLFlush plastered ceiling 6.5mm Gypsumboard with skim coat finish fixed to new38x50mm brandering
SHADOWLINE CORNICE:50mm Shadowline cornice by CAPCOOSA
NEW FLOOR FINISHES
TILES
CARPET:
Supplier: ItalTile
Tile name:TiStone Bianco Pol
Code:
Supplier: BelgoTex :
Carpet name: Equiniox Aquirius
CARPET:
600X600mm Ceramic tiles
TILES
Supplier: ItalTile
Tile name: Uptown White
Code:
600X600mm Ceramic tiles
Finish: Standard
Finish: textured/Non-slip
Custom
TRIMS:
Supplier: GenisisType: Aluminium Access RampCode: RAA104Finish: 81 Matt Silver
STAIR NOSING:
Supplier: GenisisType: Stainless steel nosing with Silicone Carbide InsertCode: NRS360Finish: 16 Black
ACCES FLOOR: 200mm AFFL
Supplier: To be determinedType: To later specificationCode: To later specificationFinish:To later specification
WINDOW COVERINGS
BLINDS
LUXAFLEX 25mm ALUMINIUM VENETIAN.COLOUR:OLD PEWTER,(To fit inside window reveals:Confirmmeasurements on site)
B1
GENERAL NOTES:
THIS DRAWING MUST NOT BE SCALED. DIMENSIONS AND LEVELS ARE TO BE CHECKED. THELATTER ON SITE, BY THE CONTRACTOR BEFORE COMMENCEMENT OF ANY WORK OR SETTINGOUT OF SHOP DRAWINGS. THE DESIGN SHOWN ON THIS DRAWING IS COPYRIGHT AND REMAINSTHE PROPERTY OF THE ARCHITECT.
QUALITY OF MATERIALS AND WORKMANSHIP TO COMPLY WITH THE LATEST RELEVANT CODESAND SPECIFICATIONS OF SANS AND SABS AND THE MINIMUM STANDARDS OF STANDARDPRELIMINARIES (JBCC) AND MODEL PREAMBLES FOR TRADES (2008-ASQS) AND WEREAPPLICABLE. PROJECT SPECIFICATIONS.
ALL BOUNDARIES, DIMENSIONS AND LEVELS ARE TO BE CHECKED ON SITE BEFORECONSTRUCTION AND ANY DISCREPANCIES ARE TO BE REPORTED TO THE ARCHITECT.
FOR THE PURPOSE OF COORDINATION, ALL RELAVANT PARTIES MUST CHECK THISINFORMATION PRIOR TO IMPLEMENTATION. ANY DISCREPANCIES TO BE REPORTED TO THEARCHITECT.
DO NOT SCALE THIS DRAWING.
PARTIAL SERVICE: ANY DISCREPANCIES WITH SITE OR OTHER INFORMATION IS TOBE ADVISED TO THE ARCHITECT AND DIRECTION OR APPROVAL IS TO BE SOUGHTBEFORE THE IMPLEMENTATION OF THE DETAIL.
CONTRACTOR TO PROVIDE SAMPLES OF FINISHES FOR ARCHITECTS APPROVAL.
WHERE DEVIATIONS TO SPECIFICATIONS ARE CONTEMPLATED THE CONTRACTOR MUSTREQUEST APPROVAL FROM THE ARCHITECT.
Revision NoProject No
Date
Drawings
Project
Drawn Scale
Project Address (Farm name/Portion no): Klipfontein/203-IQ. Randburg, City of Johannesburg
ARCHITECTS: PRAKASEN GOVENDER SACAP : 5278
SIGNATURE:
Purpose of Drawing:
Cell: 083 777 2627 • Tel: (031) 584 7200 • Fax: (031) 584 7203Email: [email protected] • www.pgaarchitects.co.za
Drawing No
STAMPS AND NOTES:
TENDER
MURRAY HARDMAN SACAP: CANT 24750393
CLIENT SIGNATURE DATE: / /
1 : 5021-Oct-155:08:27 PM
MGH - 15047 220-230
MINTEK
PROPOSED NEW INTERIOR REFURBISHMENTS -MINTEK GATEHOUSE
CEILING & FINISHES LAYOUTS
JDV
1 : 50
220.1 - GF CEILING LAYOUT1
1 : 50
220.2 - FF CEILING LAYOUT2
1 : 50
230.1 - GF WALL & FLOOR FINISHES3
1 : 50
230.2 - FF WALL & FLOOR FINISHES4
Revision Schedule
RevisionNumber Revision Date Revision Description
