22 December 2011
description
Transcript of 22 December 2011
[ 1 ]
22 December 2011
Notes on jet-clump interaction targets (Black 1 – Black 4) for NLUF shots of 20 January 2011
Compilation of radiographs received from Robert Stamm on 21 December 2010, with approximate dimensions added.
Red lines are outline of jet-forming washer and axis of jet. Black lines and figures show approximate positions of bottom, top, and centre-of-gravity of clump of particles.
Pre-shot radiography axes are -45, 0, +45 degrees. Radiography axes in experiment are -36 and +36 degrees.
End view of target does not have sufficient dynamic range to show ball positions in pre-shot radiographs.
Slides 2 – 5 are pre-shot radiographs.Slide 6 is email from Robert Stamm.Slides 7 – 12 are target request.
The manufactured targets are a good approximation to what was requested, although the ball cluster is about 0.25 – 0.75 mm further downstream than requested.
Need decision on order of preference for these targets, and choice of backlighter times.
[ 2 ]
Black_1_RF101018-3(C-2) 2X -45Deg.jpg Black_1_RF101018-3(C-2) 2X 0Deg.jpg Black_1_RF101018-3(C-2) 2X 45Deg.jpg
Black_1_RF101018-3(C-2) 4X Sphere.jpgBlack_1_RF101018-3(C-2) 4X Hohlraum.jpg
1.22.
5
0.3 0.3
[ 3 ]
Black_2_RF101022-5(C-4) 2X 0Deg.jpgBlack_2_RF101022-5(C-4) 2X -45Deg.jpg Black_2_RF101022-5(C-4) 2X 45Deg.jpg
Black_2_RF101022-5(C-4) 4X Hohlraum.jpg Black_2_RF101022-5(C-4) 4X Sphere.jpg
1.11.
6
0.4
[ 4 ]
Black_3_RF101101-4(C-5) 2X -45Deg.jpg Black_3_RF101101-4(C-5) 2X 0Deg.jpg Black_3_RF101101-4(C-5) 2X 45Deg.jpg
Black_3_RF101101-4(C-5) 4X Hohlraum.jpg Black_3_RF101101-4(C-5) 4X -Sphere.jpg
1.02.
5
0.30.4
[ 5 ]
Black_4_RF101018-4(C-3) 2X -45Deg.jpg Black_4_RF101018-4(C-3) 2X 0Deg.jpg Black_4_RF101018-4(C-3) 2X 45Deg.jpg
Black_4_RF101018-4(C-3) 4X Sphere.jpgBlack_4_RF101018-4(C-3) 4X Hohlraum.jpg Black_4_RF101018-4(C-3) 4X -Sphere85keV.jpg
1.02.
5
0.2 0.3
[ 6 ]
Email from Robert Stamm, 21 December 2010
Stamm, Robert M [[email protected]]
Hi John,
Attached are the radiographs of the “Type A” 300 um offset foam assemblies (Jet and multi-ball interaction : OMG-ASM-0164 (nominally 4 targets with approx 25 balls, set 300 um off center) :Use components C-2, C-3, C-4, C-5.
It was difficult to penetrate through the titanium and gold ablators to see the offset balls in the foam. Let me know if these are acceptable. If not, we can try a much longer exposure when we come back the week of 1/3/11 after the holiday shutdown and see if that will work.
I will be out of office 12/22 through 1/3/11.
We will send the rest with the QA report to you by ~ 1/12/11.
Thanks,
Robert Stamm
Schafer Corporation at Sandia National Labs1515 Eubank SE RM.1241 BLDG.962 MS1196Albuquerque, NM 87123Desk 505 284 8385 Pager 505 951 5605 FAX 505 844 0573http://www.schafercorp.com/Company/sl/icf.htm
[ 7 ]
NLUF AstroShkClmp-11A : Jet and multi-ball targets
Drawings SK-2010-11-08-A (001 – 005), version 2
Requirement is :
4 targets with approx. 25 number balls of 125 µm dia.
[ 8 ]
1100(tol. -100, +200)
4000 dia. nominal
1000 dia. spherical region containing embedded particles. Centre of sphere is radially offset 300 from centre line of hohlraum.
RF foam (0.3 g/cc)
4000 nominal
4000
dia
.
1600
dia
.
1200
dia
. LE
H
1200
50 end-wall thickness
50 side-wall thickness
SK-2010-11-08-A-001Target components for NLUF AstroShkClmp-11A, jet and multi-ballDimensions in µm8 November 2010
100
125
700
CL
Gold and titanium disks supplied by AWE
Hohlraum
Hohlraum and experimental package
[ 9 ]
45.0° 45.0°
1.5 mm (3 positions, as shown)
Alignment fibres, 3 positions as shown. Confirm fibres are visible in XTVS and YTVS views (see SK-2010-11-08-A-005)
A
A
View on B
B
Fiducial grid
P7
Mounting stalk10.8°
P6
Section AA
SK-2010-11-08-A-002-ver2Target components for NLUF AstroShkClmp-11A, jet and multi-ball : alignment fibre positionsThird angle projectionDimensions in µm9 November 2010
H2
[ 10 ]
P7
H2
P6
36°
300 radial offset from centre line of hohlraum
LOS to TIM3 in H18
View on CSection AA
1100 (tol. -100, +200)
A
A
C
Fiducial grid
SK-2010-11-08-A-003-ver2Target components for NLUF AstroShkClmp-11A, jet and multi-ball : embedded particle positionsThird angle projectionDimensions in µm9 November 2010
[ 11 ]
3300
Cut off corner of grid, to avoid left-right uncertainty in pre-shot radiographs
B
View on AView on B
A
Fiducial grid
SK-2010-11-08-A-004-ver2Target components for NLUF AstroShkClmp-11A, jet and multi-ball : fiducial grid positionThird angle projectionDimensions in µm9 November 2010
[ 12 ]
SK-2010-11-08-A-005Target components for NLUF AstroShkClmp-11A, jet and multi-ball : XTVS and YTVS views and backlightersDimensions in mm8 November 2010