FLEXI FRANCE

STRUCTURE 2.5 - TECHNICAL DATA SHEET Page : 1 / 1

Job n° :

REFERENCE: 203.71139 REV. 0 Name : MGARAH

IN DATABASE SINCE 9/14/2011 Date : 16/12/2011

CONFIDENTIAL - NOT TO DISCLOSE WITHOUT AUTHORIZATION TECHNIP GROUP - This document contains confidential information - Property of TECHNIP FRANCE S.A.S. - Copyright TECHNIP FRANCE – All rights reserved.

PED_Imp_025 – Rev. 6

INTERNAL DIAMETER 8.00" SWEET SERVICE DESIGN PRESSURE 2016 psi 139 bars DESIGN TEMPERATURE 85 °C FACTORY TEST PRESSURE 3031 psi 209 bars FTP/DP 1.50

N° LAYER DESCRIPTION UTS

(MPa) MYS (MPa)

Mass (Kg/m)

I.D. (mm)

Th. (mm)

SDP (MPa)

1 INTERLOCKED CARCASS 60.0 x 1.5 x 7.5 DUPLEX 2101 (FE 11)

650 - 23.91 203.20 7.50

2 PRESSURE SHEATH CROSSFLEX (TP 10) 5.09 218.20 7.00 3 FIRST ARMOUR LAY. FI 09

34 Flat wires: 12 x 5 at -55.9 deg. 850 750 26.67 232.20 5.00 271

4 ANTI-WEAR TAPE 75.0 x 1.5 PIPELON (BF 01)

1.09 242.20 1.50

5 SECOND ARMOUR LAY FI 09 35 Flat wires: 12 x 5 at 55.1 deg.

850 750 26.90 245.20 5.00 253

6 HIGH STRENGTH TAPE G2/G2/G2/KV230/KV230/ESTER/ESTER

0.99 255.20 2.55

7 EXTERNAL SHEATH TP-FLEX TP26 Yellow 5.16 260.30 6.50 THEORETICAL CHARACTERISTICS IMPERIAL METRIC

DIAMETER inside 8.00 in 203.20 mm DIAMETER outside 10.76 in 273.30 mm VOLUME internal 0.370 cf/ft 34.33 l/m VOLUME external 0.631 cf/ft 58.66 l/m WEIGHT in air empty 60.35 lbf/ft 89.82 kgf/m WEIGHT in air full of seawater 84.00 lbf/ft 125.00 kgf/m WEIGHT in seawater empty 19.95 lbf/ft 29.68 kgf/m WEIGHT in seawater full of seawater 43.59 lbf/ft 64.87 kgf/m SPECIFIC GRAVITY in sea water empty 1.49 1.49 PRESSURE Nominal bursting 5554 psi 383 bars HYDROSTATIC collapse pressure lay 2 826 psi 57 bars DAMAGING PULL in straight line 162665 lbf 723.57 kN MINIMUM BENDING RADIUS for STORAGE 5.82 ft 1.77 m BENDING STIFFNESS at 20°C 116930 lbf.ft2 48.32 kN.m2 RELATIVE ELONGATION for 100 kN 0.144613 % 0.144613 % THERMAL EXCHANGE COEFFICIENT at 20°C 6.51 Btu/hftF 11.27 W/m.K