Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method...

25
http://www.gratisexam.com/ VCS-277.exam Number : VCS-277 Passing Score : 800 Time Limit : 120 min File Version : 1.0 http://www.gratisexam.com/ VCS-277 Administration of Veritas NetBackup 8.0 and NetBackup Appliances 3.0 Version 1.0

Transcript of Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method...

Page 1: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

VCS-277.exam

Number: VCS-277Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

VCS-277

Administration of Veritas NetBackup 8.0 and NetBackup Appliances 3.0

Version 1.0

Page 2: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Exam D

QUESTION 1Which information is validated during an image verification operation?

A. data on the master server is validated with data in the NetBackup catalog

B. data on the client is validated with data in the NetBackup catalog

C. data on the backup storage is validated with data in the NetBackup catalog

http://www.gratisexam.com/

D. data on the client and the backup storage is validated with data in the NetBackup catalog

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

QUESTION 2An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes.

How can the administrator modify the time between backup attempts?

A. modify the Job retry delay host property

B. modify the Policy update interval host property

C. modify the Schedule backup attempts host property

D. modify the Take checkpoint every value in the backup policy

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

Page 3: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

QUESTION 3Which feature is enabled after adding a master server to the Trusted Master Servers tab?

A. backup of clients in other master server domains

B. remote console to another master server

C. targeted Auto Image Replication

D. remote catalog backups

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

QUESTION 4An administrator has a backup policy with the following policy attributes:

3 paths listed in the Backup Selections list5 clients listed in the Clients listAllow multiple data streams is selectedLimit jobs per policy is set to 4

How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to handle the expected jobs?

A. 3

B. 4

C. 12

D. 15

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 5An AdvancedDisk storage unit consistently reaches capacity, causing older, staged backups to expire.

Page 4: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

How can the administrator control the prioritization of images that get removed?

A. change the priority for secondary storage lifecycle operations

B. use Data Classification

C. change the priority of relocation jobs in the staging schedule

D. modify Retention Levels

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 6Refer to the exhibit.

A backup policy uses a Full Backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:

The administrator runs a manual backup at 10:00 on Thursday.

When would the next backup run, if all prior backups completed successfully?

A. Friday at 2:00

B. Friday at 10:00

C. Monday at 2:00

D. Monday at 10:00

Correct Answer: CSection: (none)

Page 5: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Explanation

Explanation/Reference:

QUESTION 7Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH), under Settings > Security >Authentication, to configure and manage Network Information Service (NIS) user registration?

http://www.gratisexam.com/

A. LDAP

B. ActiveDirectory

C. Kerberos

D. LocalUser

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.000115505

QUESTION 8An administrator needs to recover the NetBackup master server catalog at a disaster recovery site, but the DR files are unavailable.

Which command should the administrator use to recreate the DR file?

A. bprecover

B. nbcatsync

C. bpimport

D. cat_import

Correct Answer: CSection: (none)Explanation

Page 6: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.000064623

QUESTION 9VMware type backups of a newly added Windows Server 2008 guest virtual machine are failing with the following status:

The associated bpfis process log indicates that the attempt to quiesce this virtual machine failed.

Which two steps should the administrator perform to resolve the issue? (Select two.)

A. enable VMware Tools in the virtual machine

B. disable Block-Level Incremental Backup in the policy

C. install the NetBackup plug-in for vSphere Web Client on the guest virtual machine

D. confirm Microsoft Volume Shadow Copy Service within the guest virtual machine is performing properly

E. ensure the virtual machine display name contains ASCII characters

Correct Answer: CDSection: (none)Explanation

Explanation/Reference:

QUESTION 10Which action is performed by the NetBackup deduplication plug-in?

A. writing data segments into the MSDP containers

B. processing MSDP transaction logs

C. performing file fingerprinting actions

D. performing queue processing

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Reference: http://itdoc.hitachi.co.jp/manuals/oem/veritas/JP1V101VERINBU02500/NetBackup7.6_Dedupe_Guide_e.PDF

Page 7: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

QUESTION 11A NetBackup master server has commenced writing four long-running duplication jobs to an AdvancedDisk disk pool. The value of Maximum concurrent jobs forthe storage unit and Limit I/O streams for the disk pool are both set to 4.

There are 35 jobs queued on the master server that require this disk pool:5 replication jobs with priority 999910 backup jobs with priority 99920 duplication jobs with priority 99

Two restore jobs that require this disk pool are then submitted with a default priority.

Which job type goes active next?

A. Backup

B. Duplication

C. Replication

D. Restore

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

QUESTION 12An administrator has a job that has failed. See the contents of the job’s Detailed Status tab from the NetBackup Administration Console Activity Monitor providedbelow:

Page 8: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

What may be the cause for the failure?

A. The version of NetBackup installed on the master server and media server is higher than the version installed on the client.

B. The media server is unable to resolve the hostname of the client to any IP address.

C. The required NetBackup processes need to be started on the client.

D. The media server failed to perform a reverse name lookup of the IP address associated with the client.

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 13An administrator has a scheduled policy that backs up 20 clients, each with multiple mount points and multiple data streams enabled. One of the jobs has failed andis in an Incomplete state in the Activity Monitor.

Page 9: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

How should the administrator verify the incomplete job runs prior to the next scheduled backup?

A. run a manual job for the client

B. resume the job

C. run a manual job for the mount point

D. resume the parent job

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 14A NetBackup environment suffers from intermittent network outages between the Media Server Deduplication Pool (MSDP) media server and clients during thebackup window. The results in multiple backup failures.

How should an administrator overcome the backup failure issue?

A. enable Network Resiliency

B. configure client-side deduplication

C. increase the client connect timeout

D. increase the CR_STATS_TIMER interval

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 15Which event can cause a NetBackup appliance to proactively shut down?

Page 10: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

http://www.gratisexam.com/

A. multiple disk failures that may put data at risk

B. a fan failure

C. RAID battery backup failure

D. power supply input voltage overload

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 16An administrator needs to prevent users on all client systems from performing user-directed restores while ensuring they are able to view the contents of all previousbackup images.

What should the administrator configure to accomplish this goal?

A. remove the client from the Restore Failover list in the master server host properties

B. modify the auth.conf file on the master server to exclude the line:* ADMIN=JBP=ENDUSER+BU+ARC

C. de-select the Allow server file writes parameter in the master server host properties

D. de-select the Allow client restore parameter in the master server host properties

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 17An administrator has a backup for client Linux1 using the LinuxClients policy complete successfully. Even though the policy Backup Selections are NOTmodified, the backup job fails the next day with the following status code:

What is a possible reason the job failed?

Page 11: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

A. The Enable granular recovery option was unset.

B. The client was added to another backup policy.

C. The file systems have been unmounted on the client.

D. The client was temporarily shut down.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

QUESTION 18An administrator needs to store secure tape copies of protected data to an offsite location.

How can the administrator automatically eject tape media daily and create detailed reports?

A. encrypt the tapes using software encryption and use a storage lifecycle policy to perform automatic ejects and create reports

B. enable the encryption attribute on the vault policy to perform automated ejects and create reports

C. use tape drives that support hardware encryption and use a vault policy to perform automated ejects and create reports

D. use tape drives that support hardware encryption and use a storage lifecycle policy to perform automated ejects and create reports

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 19Refer to the exhibit.

Page 12: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

The following storage lifecycle policy was used to back up data from a client. All duplication jobs have completed, and none of the backups have expired.

How should an administrator restore data from the tape using NetBackup?

A. from the BAR console, select the tape backup to restore from

B. from the NetBackup Administration Console, promote copy 1 to the primary copy

C. from the NetBackup Administration Console, promote copy 2 to the primary copy

D. from the NetBackup Administration Console, promote copy 3 to the primary copy

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 20Which two performance scenarios benefit from seeding the MSDP pool? (Select two.)

A. new client backups over WAN

B. new application backups over SAN

C. new VADP VMware backups using media server as the backup host

D. new replication to a new DR site

E. new clients with large file systems containing small files

Correct Answer: AESection: (none)Explanation

Page 13: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.v71187860_nbu-msdp-web-deliverable

QUESTION 21A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by anyother policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.

Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?

A. set the Allow multiple data streams policy attribute

B. enable the Limit Jobs per policy attribute

C. set the Maximum jobs per client host property

D. enable multiplexing for the storage unit and set the value

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.DOC2799

QUESTION 22Veritas recommends that TLS (Transport Layer Security) be enabled for security purposes when using appliance syslog forwarding.

Which step must the administrator perform first to upload the certificate files which are required for TLS Anonymous Authentication configuration?

A. copy the certificate and private key files: ca-server.pem, nba-rsyslog.pem and nba-rsyslog.key to a non-appliance location

B. run Settings > LogForwarding Share Open to open NFS and CIFS shares on the appliance

C. mount an NFS or a CIFS share to appliance_name/inst/logforwarding on the server where the certificates reside

D. upload the certificate and private key files to /inst/logforwarding

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.000117153

QUESTION 23After creating a NBU-Catalog type backup policy, an administrator receives the following message:

Page 14: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Which two options are available to an administrator to ensure the DR file is available for future use? (Select two.)

A. ensure the folder DR file is on a non-root volume

B. ensure the DR file is created on a volume other than the NetBackup volume

C. ensure the NetBackup catalog is on a non-root volume

D. configure a valid email address of the administrator in the Send email option

E. configure Auto Image Replication to send the DR file to a remote master server

Correct Answer: BCSection: (none)Explanation

Explanation/Reference:

QUESTION 24Which type of backup schedules are available when using the After each backup session schedule type for an NBU-Catalog policy type?

http://www.gratisexam.com/

A. Full

B. Differential Incremental

C. Vault Catalog Backup

D. Application Backup

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Reference: http://systemmanager.ru/nbadmin.en/ch31s03s01s01.htm

Page 15: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

QUESTION 25A new storage shelf is added to an existing appliance.

Which command under Manage > Storage must the administrator perform first after a new shelf is connected to the appliance and the appliance is powered on?

A. Add operation to add a new disk

B. Scan operation to scan for new storage

C. Resize operation to resize the data partitions

D. Edit operation to edit the data partitions

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Reference: https://vox.veritas.com/t5/NetBackup/Netbackup-appliance-New-disk-shelf-Add/td-p/756083

QUESTION 26Which command should an administrator use to generate a list of all files backed up on a client for a specific backup job?

A. bpimage

B. bplist

C. bpimagelist

D. bpdbjobs

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 27An administrator has a job that has failed. Upon reviewing the Detailed Status tab for the job, the administrator sees the following information:

Page 16: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Which setting value prevented the job from running during the backup window?

A. the Global Attributes > Maximum jobs per client master server host property

B. the Timeout > Client read timeout master server host property

C. the Maximum concurrent jobs storage unit setting

D. the Limit jobs per policy policy setting

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Reference: https://vox.veritas.com/t5/NetBackup/196-because-limit-has-been-reached-for-requested-resource/td-p/769711

QUESTION 28Which configuration file should and administrator modify to seed the local fingerprint caching configuration on a NetBackup MSDP client?

A. spa.cfg

B. pd.conf

C. contentrouter.cfg

D. agent.cfg

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Reference: http://itdoc.hitachi.co.jp/manuals/oem/veritas/JP1V110VERINBU04700/NetBackup7.7.1_Dedupe_Guide_e.PDF (page 178)

QUESTION 29Which user account(s) is allowed remote login access directly to the NetBackup Appliance Shell Menu (CLISH)?

Page 17: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

A. admin

B. NetBackupCLI users

C. admin and root

D. admin and NetBackupCLI users

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.000115385

QUESTION 30An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.

Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?

A. set Enable unrestricted media sharing for all media servers

B. increase Restore retires

C. increase Delay on multiplexed restores

D. add the client IP addresses to Resilient Networks

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 31Which schedule can be configured as a synthetic backup in addition to the full backup schedule type?

A. Differential incremental backup

B. Cumulative incremental backup

C. User backups

D. Automatic backup

Correct Answer: B

Page 18: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Section: (none)Explanation

Explanation/Reference:

QUESTION 32Which two NetBackup features are available to protect the Media Server Deduplication Pool (MSDP) catalog? (Select two.)

http://www.gratisexam.com/

A. NetBackup catalog backups

B. MSDP catalog policy

C. Optimized Catalog Duplication

D. MSDP shadow copies

E. Checkpoint

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Reference https://www.veritas.com/support/en_US/article.v100016542_nbu-msdp-web-deliverable

QUESTION 33Which two restore types must be initiated from a client system rather than the NetBackup Administration Console on the master server? (Select two.)

A. Oracle

B. MS-SharePoint

C. MS-Exchange

D. MS-SQL-Server

E. VMware

Correct Answer: CDSection: (none)

Page 19: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Explanation

Explanation/Reference:Reference https://www.veritas.com/support/en_US/article.000081333

QUESTION 34Storage lifecycle policy SLP1 is used to perform a backup and duplication. The backup is always a small, 100MB backup. The master server host properties for SLP

Parameters are set to the default values.

How can the administrator ensure the duplications run as soon as possible after the backup completes?

A. reduce the Job submission interval setting to 0

B. reduce the Minimum size per duplication job setting to 50 MB

C. right-click SLP1 and select Manual Relocation to Final Destination

D. increase the Priority for secondary operations in the SLP

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 35An administrator has downloaded a patch from the NetBackup appliance support website to a Windows client. The administrator plans to move the patch to theappliance through a file share. Accessing the \\<appliance-name>\incoming patches folder from the Windows client fails.

Which action should the administrator perform?

A. login to Windows as a NetBackupCLI user

B. manually map the share using the local Windows credentials

C. use the Share Open command in the NetBackup Appliance Shell Menu

D. use the cat (Unix) command to join the split tar files

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Reference https://www.veritas.com/support/en_US/article.000095813

Page 20: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

QUESTION 36In which scenario is Use Accelerator unavailable in a backup policy?

A. for VMware virtual machines with a Linux guest OS

B. for virtual machines hosted on a Hyper-V Host using WMI

C. for a NetApp NDMP filer

D. for an Exchange database availability group (DAG)

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

QUESTION 37Which command can an administrator run to test and analyze connections between master servers, media servers, and clients for multiple NetBackup ports?

A. bperror

B. bpconfig

C. bpresolver

D. bptestnetconn

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Reference: https://download.veritas.com/resources/content/live/DOCUMENTATION/8000/DOC8605/en_US/NetBackup77_Network_Ports_Reference_Guide.pdf?__gda__=1499998217_7a5254cd690116c179a03075be434917 (Page 8)

QUESTION 38Which supported step should an administrator perform to ensure all operating system logs are sent from an appliance to a central logging server running Linux?

A. configure access to the appliance logs with the share open command

B. configure syslog forwarding in the appliance CLISH

C. configure syslog forwarding in OpsCenter

D. configure a cron job on the appliance to copy the logs

Page 21: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 39Which interface is pre-configured with the 192.168.229.233 IP address in a NetBackup appliance?

A. lo

B. eth0

C. eth1

D. IPMI

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Reference: https://vox.veritas.com/t5/NetBackup-Appliance/Change-of-management-port-after-NBU-appliance-upgrade/td-p/703029

QUESTION 40An administrator is comparing the NetBackup Accelerator and NetBackup FlashBackup features to determine which feature should be used for backup of a verylarge file system with millions of files.

Which consideration is irrelevant when determining whether to use NetBackup Accelerator or NetBackup FlashBackup in the situation?

A. the file system change rate

B. the file system storage capacity

C. the type of file system being used

D. the file system folder depth

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

Page 22: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

QUESTION 41An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. Whenrestores are performed for data that was backed up by mediaA, the restores fail.

Which setting must the administrator modify to allow successful restores?

A. from the master server, run bpimage to change the name of the media server from mediaA to mediaB

B. set Enable unrestricted media sharing for all media servers in the master server host properties in the Media section

C. in the Bar console, change the Server to use for backup and restores setting to mediaB

D. verify both media servers are set up in the master server host properties in the Restore Failover section

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 42To reduce network use by limiting the number of parallel backup streams, which cloud setting should be modified under the Scalable Storage host property?

http://www.gratisexam.com/

A. Metering > Metering interval

B. Network Connections > Maximum concurrent jobs

C. Throttling > Total available bandwidth

D. Throttling > Sampling interval

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.000121447

Page 23: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

QUESTION 43When powering an appliance on, it fails to complete the Power On Self Test (POST).

Which two monitoring tools should the administrator use to gather information regarding the problem? (Select two.)

A. CLISH

B. LED Indicators

C. Data Collect bundle

D. Appliance logs

E. Alarms

Correct Answer: BESection: (none)Explanation

Explanation/Reference:Reference: https://knnubt06oc.kuenn.co:9443/products/veritas/NetBackup_52xx_and_5330_Appliance/NetBackup_52xx_and_5330_Appliance_Troubleshooting_Guide-2.7.3.pdf (page 76)

QUESTION 44A NetBackup appliance administrator observes poor performance on backups to an MSDP pool. The job details indicate bpbkar is waiting for empty buffers.

Where should the administrator tune the appliance?

A. Main_Menu > Settings > NetBackup DataBuffers > Size > Defaults

B. the bp.conf file’s NUMBER_DATA_BUFFERS setting

C. the bp.conf file’s NUMBER_DATA_BUFFERS_DISK setting

D. Main_Menu > Settings > NetBackup DataBuffers > Size > Disk

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Reference https://www.veritas.com/support/en_US/article.000010401

QUESTION 45An administrator wishes to modify the Override default job priority option for an MS-Windows type restore job before the restore job begins.

Page 24: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Where in the Microsoft Windows Backup, Archive, and Restore console can the administrator configure this option?

A. after clicking the Restore button, in the Restore Marked Files dialog box

B. at the bottom of the options listed in File > NetBackup Client Properties > Network

C. in the Backup, Archive, and Restore window, under the Restore Files tab

D. within File > Specify NetBackup Machines and Policy Type

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Reference: https://www.veritas.com/support/en_US/article.000123107

QUESTION 46An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.

What is preventing the administrator from suspending the job?

A. Child jobs are still active

B. The parent job is still active.

C. Multiplexing is enabled.

D. Checkpoint restart is disabled.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 47Which backup storage is unsupported with media server load balancing?

A. BasicDisk

B. Media Server Deduplication Pool

C. AdvancedDisk

D. Media Manager storage

Page 25: Veritas.Actualtests.VCS-277.v2017-08-18.by.Henrick · 2019-11-09 · Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH),

http://www.gratisexam.com/

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

http://www.gratisexam.com/