2017 Marine & Landbased Technical Brochurefluinamics.com/es/documentacion/catalogo/dossier.pdf ·...

fluinamicsEngineering and facilities

20

17 Ma

rine

& La

nd

ba

se

d Te

ch

nic

al B

roc

hu

re

MARINE & OFFSHORE EQUIPMENT

Ma

rine

Ind

us

trial

Offs

ho

reW

as

tew

ate

r


2

ENGINEERING SOLUTIONS FOR WATER

FLUINAMICS is an european based company specialized in water treatment and energy. Although we are a very young company, we all have long time experience in the world of water treatment and energy services.

We design and develop solutions for water filtration, desalination and in general water purification or adaptation, based specially on reverse osmosis technology.

Due to our continuous effort in R&D, we’re a global company achieving high performance with

state-of-the-art engineering capabilities.

MARINE & OFFSHORE

We are specialized in fresh water makers by

reverse osmosis. We design and manu-facture tailor made systems for seawater desalination, to be installed onboard ves-sels, rigs/platforms, etc. We are introduc-ing as well, a new ultrasonic antifouling system for vessels and even drydocks.

INDUSTRIAL

Design and implementation of solutions for industries where for adapting water in some way: desalination, demineralization, purification, etc. (water for boilers, for cooling towers, technical water for diverse industrial processes, mining, etc.)Water treatment solutions & systems, off the grind in remote or isolated areas, solar or wind powered.

HEALTHCARE

Ultra-pure water, water for haemodialysis, technical water for laboratories and hospitals.

Industrial filtration processes for the water treatment.

Filtration of suspended solids

Acidity removal

Activated Carbon Filtration

Iron and Manganese removal

Arsenic and Heavy Metals s removal

Ultrafiltration for ultrapure water over colloids,enzymes, microorganisms and endotoxin.

Ultrafiltration membranes

Membrane Bioreactor MBR

Reverse osmosis equipment for production of potable water from tap water, brackish or saline. Removes over 90% of the ionic contamination, most nearly all organic contamination and molecular contamination.

Ion exchange resins and elec-trodeionization for dissolved ions removal.

Softeners - Removal Ca & Mg

Demineralisation plants

Mixed Bed Polishing plants

Removal of heavy metals

UV disinfection used as a bac-tericide and to break down and photo-oxidize organic pollutants. Chance of autonomous systems using renewable energies.

Pharmaceuticals

Drinking water & ballast water

Food and beverage production

WATER TREATMENT EQUIPMENT

We offer a wide range of optional

equipment essential for water

treatment or water generation

on board. Our carefully selected

components ensure reliability

and long service life, minimum

maintenance required:

Sized to fit in minimum space,

modular, multipart options availa-

ble to facilitate installation, into a

robust steel skid and framework

coated for offshore service and

equipped with eye bolts for easy

transport and handling on site.

• Pretreatment (microfiltration,

chemical conditioning, pollut-

ants removal, etc...) to protect

the systems parts from any

damage, and to maximize the

performance of the process.

• High-pressure pump built from

high-end materials (AISI316,

Duplex Stainless Steel, etc..)

• Control System Cabinet

(automatic or manual start-up,

backwash, shutdown, state

alarms, monitoring conductiv-

ity of the product water.....)

• Postreatment to make fresh

water from the RO system

suitable for drinking (mineral-

izer, a chlorination unit and

even a pH adjustment unit)

• No ferric materials are part of the pipelines and

fittings. All is made of seawater resistant material

(PVC-U, AISI316, AISI904L,CuNi 90-10%...).

• For Reverse Osmosis sytems we mount side-

port membrane pressure vessels to allow vertical

or horizontal configurations to reduce footprint for

both normal operation and maintenance.

• Raw water inlet & permeate water cast acrylic

variable area flow meters

• Membrane cleaning system incudes heater and

stirrer to ensure an effective cleaning for an extra

long life of the system

• IEC Standard compliance for safety and effec-

tiveness of the systems

• High efficiency systems with a lower energy con-

sumption per m³ of permeate water produced

MAIN COMPETITIVE ADVANTAGES


3

MODEL TRYPTON 2 TRYPTON 4 TRYPTON 6

Nominal flow (m3/day) 25ºC - 35.000 ppm 2 4 6

Feed water flow (m3/h) 0,69

Minimum feed water pressure (bar) 3 3 3

Operational system pressure (bar) 51 51,5 51

Maximum system pressure (bar) 69 69 69

Maximum permeate back-pressure (bar) 2 2 2

Power consumption (kW) 1,25 1,29 1,25

Effciency (kWh/m¶) 14,04 7,76 5,10

Average Recovery (%) 12,9 23,33 35,51

Nominal product conductivity (mS/m) ≤ 75 mS/m ≤ 75 mS/m ≤ 75 mS/m

Maximum product conductivity (mS/m) ≤ 100 mS/m ≤ 100 mS/m ≤ 100 mS/m

Membranes Number 1 2 3

Membranes Type 2540 2540 2540

Product water connection 1/2 ” BSP 1/2 ” BSP 1/2 ” BSP

Concentrate connection 1/2 ” BSP 1/2 ” BSP 1/2 ” BSP

Feed water connection 3/4” BSP 3/4” BSP 3/4” BSP

Unit dimension (m) (LxWxH) 1,15x0,60x0,90

Unit dry weight (kg) 55 65 75

SEAWATER REVERSE OSMOSIS WATERMAKERS

TRYPTONY NNONONOONNNNONON

TRYPTON series basic pack includes:

• Prefiltration system of 20 and 5 microns(µm)

• Inlet and permeate water flowmeter

• High pressure regulating valve

• High and low pressure switches & gauges

• Conductivity meter sensor

• Control panel with the system´s key parameters

See optional accessories to customize your

system


MODEL THESEUS 10 THESEUS 13 THESEUS 15

Nominal flow (m3/day) 25ºC - 35.000 ppm 10 13 15

Feed water flow (m3/h) 1,38

Minimum feed water pressure (bar) 3 3 3

Operational system pressure (bar) 56 61 62

Maximum system pressure (bar) 69 69 69

Maximum permeate back-pressure (bar) 2 2 2

Power consumption (kW) 2,72 2,99 3,0

Effciency (kWh/m¶) 6,63 5,29 4,6

Average Recovery (%) 29,7 41 47,8

Nominal product conductivity (mS/m) ≤ 75 mS/m ≤ 75 mS/m ≤ 75 mS/m

Maximum product conductivity (mS/m) ≤ 100 mS/m ≤ 100 mS/m ≤ 100 mS/m

Membranes Number 2 3 4

Membranes Type 4040 4040 4040

Product water connection 1/2 ” BSP 1/2 ” BSP 1/2 ” BSP

Concentrate connection 1/2 ” BSP 1/2 ” BSP 1/2 ” BSP

Feed water connection 3/4” BSP 3/4” BSP 3/4” BSP

Unit dimension (m) (LxWxH) 1.27x1,12x0,50

Unit dry weight (kg) 65 75 85

THESEUS series basic pack includes:

• Inlet and permeate water flowmeter

• High pressure regulating valve

• High and low pressure switches & gauges

• Conductivity meter sensor



system

Theseussssss

4

SEAWATER REVERSE OSMOSIS WATERMAKERS

TEKNIWAT series basic pack includes:

• 25 & 5 µm PP micro filtration

• Automatic back flushing


• Membrane and horizontal or vertical pressure

vessels module.

• High pressure pump & high efficiency motor.


system


POSEIDON series basic pack includes:

• 60 µm hydrocyclone filter disc

• Automatic back flushing


• Membrane and horizontal or vertical pressure

vessels module.

• High pressure pump & high efficiency motor.


system

TEKNIWATTTATATWAATTTTATAATATT

MODEL TEKNIWAT

22

TEKNIWAT

28

TEKNIWAT

40

TEKNIWAT

55

Nominal flow (m3/day) 25ºC - 35.000 ppm 22 28 40 55

Feed water flow (m3/h) 4,08 5,70

Minimum feed water pressure (bar) 3 3 3 3

Operational system pressure (bar) 49 45 47,5 59,2

Maximum system pressure (bar) 69 69 69 69

Maximum permeate back-pressure (bar) 2 2 2 2

Power consumption (kW) 7,1 6,42 9,61 11,98

Effciency (kWh/m3) 7,9 5,49 5,6 5,3

Average Recovery (%) 22 28,7 28,7 39,46

Nominal product conductivity (mS/m) ≤ 75 mS/m ≤ 75 mS/m ≤ 75 mS/m ≤ 75 mS/m

Maximum product conductivity (mS/m) ≤ 100 mS/m ≤ 100 mS/m ≤ 100 mS/m ≤ 100 mS/m

Membranes Number 1 2 2 3

Membranes Type 8040 8040 8040 8040

Product water connection 3/4” BSP 3/4” BSP 3/4” BSP 3/4” BSP

Concentrate connection 3/4” BSP 3/4” BSP 3/4” BSP 3/4” BSP

Feed water connection 1 1/4” BSP 1 1/4” BSP 1 1/4” BSP 1 1/4” BSP

Unit dimension (m) (LxWxH) max. 1,50x1,40x1,00

Unit dry weight (kg) 410 430 450 495

MODEL POSEIDON

65

POSEIDON

80

POSEIDON

100

POSEIDON

150

Nominal flow (m3/day) 25ºC - 35.000 ppm 65 80 100 150

Feed water flow (m3/h) 5,70 8 10 13,5

Minimum feed water pressure (bar) 3 3 3 3

Operational system pressure (bar) 59,2 52,4 57,5 56,6

Maximum system pressure (bar) 69 69 69 69

Maximum permeate back-pressure (bar) 2 2 2 2

Power consumption (kW) 11,98 15,2 24.2 30

Effciency (kWh/m3) 5,3 4,9 5,1 4,52

Average Recovery (%) 39,46 33,7 40,5 45,5

Nominal product conductivity (mS/m) ≤ 75 mS/m ≤ 75 mS/m ≤ 75 mS/m ≤ 75 mS/m

Maximum product conductivity (mS/m) ≤ 100 mS/m ≤ 100 mS/m ≤ 100 mS/m ≤ 100 mS/m

Membranes Number 4 4 5 8

Membranes Type 8040 8040 8040 8040

Product water connection 1” BSP 1” BSP 1” BSP 1 1/2” BSP

Concentrate connection 1” BSP 1” BSP 1” BSP 1 1/2” BSP

Feed water connection 1 1/2” BSP 1 1/2” BSP 1 1/2” BSP 2” BSP

Unit dimension (m) (LxWxH) 1,6x1,4x1,7 1,6x1,5x1,8 2,0x1,5x1,8 2,6x1,5x1,8

Unit dry weight (kg) 560 710 1150 1750

POSEIDONNNNNONNNNNN

5

TECHNICAL WATER R.0 SYSTEMS (<= 4 ppm TDS or 6.25 µS/cm) TECHNICAL WATER R.0 SYSTEMS (<= 4 ppm TDS or 6.25 µS/cm)


For applications that require even higher purity

water, such as technical water for boilers, heaters,

electrostatic dehydrator, power generator sys-

tems or heamodial filtration, without the need of

fresh water generators.

In comparison with the Fresh Water genrator

(evaporators), double pass systems offer the fol-

lowing advantages

•No waste heat neccesary

•Cheap & easy maintenance

•Easy operation & start up

•Low energy requirement

•Low capital & water cost

•Low on-site requirements

The basic package includes:

•25 & 5 µm PP melt blown microfiltration

•Panel of instruments with pressure gauges,

flowmeters and two high pressure

regulating valves.

•Control panel with the system´s key

parameters

•High pressure pump & high efficiency

motor

•Multimedia Sand filter

•Carbon filter for odour and flavour removal

•Automatic backflushing

6

PLATE TYPE FRESH WATER GENERATOR


FLUINAMICS FLUVAC series are single-stage freshwater generator with a

capacity up to 35 t/d, for marine,offshore & onshore applications. consists of a

chamber with two titanium plate packs acting as an evaporator and a condenser

respectively.

A vacuum of 85-95% is maintained in the system by a brine/air ejector.

Seawater evaporates at a temperature of approximately 40°C due to the

vacuum condition as it passes between the plates of evaporator heated by hot

fresh water from the engine jacket cooling system, or by steam.

The basic pack includes:

• Casing with cover & Demister in stainless steel.

• 25 µm PP micro filtration

• Titanium Condenser and evaporator plates.

• Bronze combined air and brine ejector.

• Chemical dosing unit with tank.


• Instrument panel of control (pressure gauge, flown meters, safety valve...)

• IE3 high efficiency motor.

• Conductivity monitor with valve arrangement.

• Unsafe water returned to suction line of sea water ejector.

• Two (2) instructions & maintenance manuals in English language.

• Factory Acceptance Test Certification

Optional accessories to customize your system:

• Bronze Seawater pump including electrical motor.

• Rehardener & pH adjustment filter for the distillate water.

• UV / Chlorination dosing unit for disinfection of the distillate water.

• Pre-heater.

MODEL FLUVAC

5

FLUVAC

10

FLUVAC

16

FLUVAC

24

FLUVAC

30

FLUVAC

35

Distillate capacity (m3/day) 1-4 5-9 10-16 17-24 25-30 31-35

Residual salt content (ppm NaCl) <=4

Heat requirement (kW@32ºC) 235 313 440 553 755 875

Heating water flow (m3/h) 12,5 22,5 35 41 54 66,5

Heating water temperature in (ºC) 80,0 80,0 80,0 80,0 80,0 80,0

Heating water max. pressure (bar) 4,0 4,0 4,0 4,0 5,5 5,5

Pressure drop of heating water (bar) 0,2 0,2 0,2 0,2 0,5 0,5

Heating water temperature out (ºC) 65,9 65,9 65,9 65,9 65,9 65,9

Seawater flow (m3/h) 15,3 29,3 42 56 61 66,3

Seawater temperature in (ºC) 32 32 32 32 32 32

Seawater min. pressure (bar) 3,5 3,5 3,5 3,5 5,5 5,5

Seawater max. pressure (bar) 6,5 6,5 6,5 6,5 6,5 6,5

Seawater Pump Consumption (kW) 1,5 2,5 7,5 12,5 15 17

Seawater+brine temperature out (ºC) 43 43 45,9 45,9 48,9 48,9

Seawater+brine discharge pressure (bar) 1,5

Q_spec spez. heat consumption (kW/t) 58 35,8 27,5 26,8 25,1 25

Dimension (LxHxD in mm) 990 x 1000 x 1700 1289 x 1065 x 1700 1489 x 1165 x 1795

Weight in Dry / Working (kg) 575/595 615/645 655/715 720/795 975/1075 1100/1215

7

HYDROPHORES & CALORIFIERS


MODELFLUHYD

1

FLUHYD

5

FLUHYD

10

FLUHYD

15

FLUHYD

25

FLUHYD

50

System nominal flow (m3/h) 1 5 10 15 25 50

Tank Volume (m3) 0.2 0.7 1.3 2 3 4

Pump type Vertical single stage centrifugal

Number of pumps 1 2 3

Pump head (m) 40 50 60

Pump power (kW) 1.5 2.5 3.5 5.5 7.5 9.5

Water inlet flange (inch) 1 1.5 2 3

Water outlet flange (inch) 1 1.5 2 3

Dimension (LxHxD in mm) 700 x 1400 x 820 1250 x 2215 x 965 1550 x 2215 x 1165

Weight empty / service (kg) 200/400 450/1050 550/1800 560/2260 850/3500 1200/5000

FLUINAMICS FLUHYD series are designed to store sea water and supply

it at a pressure of 6 bars to all of the intakes at different points in the vessel

that use this service.

A galvanized or stainless steel shell capable of supporting more than the

operating pressure (the tank has been tested to 9 bars).

Two electrically powered pumps, controlled by pressure switches, used for

pressurizing the tank with water from the storage tanks. The pumps will be

supplied with the isolating valves and instrumentation required.

Pressure vessels, circulation pumps and other equipment can be provided

separately or as complete, ready-mounted unit with control cabinet piping

and valves.

An electric control panel containing the module’s power supply, protection

and controls. Control panel includes starters for the motors (DOL), relays,

timers, etc... for the correct operation of the equipment.

The following signals will be given to the central control system by means

of tension free relay contacts:

• RUNNING/STOP INDICATION FOR PUMP Nº1 AND Nº2

• FAILURE PUMP Nº 1 AND Nº2

• GENERAL FAILURE ALARM

• LOW PRESSURE ALARM

The equipment is fitted with a calibrated safety valve.

For monitoring and maintenance, the equipment is fitted with,

pressure gauges isolating and drain valves

• Minimal space requirements.

• Inlet and outlet manifolds permit left or right connections.

• Reliable multi-stage pumps with corrosion resistant.

• System supplied as stand-alone or modular form for retrofit.

8

FLUINAMICS FLUSTP sewage treatment plant series are a cost-effective

and compact sized treatment plant. These plant can be installed in all ocean-

going vessels, accomadting 10 or more people.

Our system maintain the quality of the world’s oceans complying with regula-

tions since has been designed to meet the new IMO MEPC 227(64) effluent

quality standards, which introduce a dilution compensation factor and desig-

nate the Baltic Sea as a “Special Area”.

Our plants are compatible with gravity and vacuum collection systems

and use the activated sludge system, which accelerates natural biological

processes. Chemical chlorination and UV disinfection reduce the residual

chlorine in the treated water, producing a clean, safe, effluent suitable for

discharging overboard.


• IMO & MED certified

• Modular construction optional.

• Automatic Pump and Blower mounted on the skid

• Minimal maintenance requirement

• Solids handling centrifugal discharge pump

• Chemical or UV disinfection and dechlorination

Optional accessories to customize your system:

• Fitted vacuum equipment

• Conditioning water flow meter

• Standby compressor & discharge pump

• Separate sewage feed system

SEWAGE TREATMENT PLANT


MODEL FLUSTP 1 FLUSTP 2 FLUSTP 3 FLUSTP 4

Number of persons/day 15 25 40 65

Black Water volume (l/day) 1100 1800 2600 4200

Max. peak of sewage volume (l/h) 125 313 440 553

BOD load (g/day) 210 22,5 35 41

Discharge pump capacity (m3/h) 4

Discharge pump head (m) 25

Discharge power (kW) 1,5 2,5

Air blower flow (m3/min) 0,20 0,30 0,40 0,60

Air blower pressure (MPa) 0,018 0,02

Air blower power (kW) 0,5 0,75 1 1,25

Dimension (LxHxD in mm) 1370 x 1530 x 1050 1750 x 1530 x 1050

Weight in Dry / Working (kg) 575/595 615/645 655/715 720/795

9

OILY WATER SEPARATORS & OIL PURIFIERS


MODELFLUOWS

5

FLUOWS

10

FLUOWS

20

FLUOWS

30

FLUOWS

40

FLUOWS

50

FLUOWS

100

System capacity (m3/h) 0.5 1 2 3 4 5 10

Discharge Standard <15mg/L, IMO MEPC.107(49)

Pump type Vertical single screw

Electrical supply AC3 - 380/440 V 50 / 60 Hz

Pump head (m) 40 50 60

Pump power (kW) 1.1 1.5 1.5 2.5 2.5 5.5 11.5

Oil discharge control method Automatic / Manual

Electrical heating method (kW) 1 2 3 4 5

Steam heating method (m2/kW) --- --- 1/30 1/45 2/60 5/150 10/300

Weight service (kg) 450 750 1100 1300 1500 2100 4100

FLUINAMICS FLUOWS series are an environmental protection product designed based on International Maritime

Organization IMO MEPC107(49) standard, the oil content in effluent water ≤ 15ppm. with standard capacities from

0.5m3/h to 10 m3/h.

The smallest type can be installed on ship less than 1000DWT. The biggest type can be installed on ship more than

500 thousand DWT.


• One Pump.

• Pneumatic piston operated valves for the following services:

- Oil Discharge

- Sea Discharge

- Re-circulation to Bilge

- By-pass adsorption tank

- Adsorption system in service

• Solenoid valve for flushing water inlet.

• Safety valves.

• System for automatic discharge of oil, including electrodes, sensor relay and accessories.

• Isolating valves, pressure indicators, etc...

• Control panel.

• Two Emengency stop buttons (local and remote as option)

• 15ppm Bilge Alarm Monitor

10

OPTIONAL EQUIPMENT: PRE & POST TREATMENT OPTIONAL EQUIPMENT: PRE & POST TREATMENT


TAILOR MADE SYSTEMSThe system can be customize upon the water re-

quirements: pretreatment, post-treatment, energy re-

covery, PLC with remote monitoring (SCADA, TCP/

IP, etc..)

• Offshore and support vessel water equip-

ment (ATEX and Norsok regulations)

• Fresh water from tap water, brackish or saline.

• Industrial filtration processes (suspended sol-

ids, iron, manganese, arsenic removal...)

• Ultrafiltration to ensure quality over colloids,

enzymes, microorganisms and endotoxins

• Ion exchange resins and electrodeionization for

dissolved ions removal

• UV disinfection for used as a bactericide and

to break down and photo-oxidize organic pollut-

ants

CLEAN IN PLACE SYSTEMS

Regular cleaning of the mem-

brane elements maintain sys-

tem performance at a higher

level.

• 250 / 500 litre tank with low

level tank safeguard

• 20 “ BIGBLUE CarbonBlock

• On/Off Switch

• AISI316 Centrifugal Pump

• Quick Disconnect Fittings

• TEFC Pump Motor

• Recycle Loop with Valve

UV DISINFECTION & ANTIFOULING

UV & Advanced oxidation pro-

cesses (AOPs) with UV irradia-

tion and photocatalyst titanium

dioxide (TiO2) that prevents

biofilm from entering the water

system.

• High quality stainless steel

(AISI316L)

• Up to 400 m³/h flow rate

• Quartz sleeves

• Long life & low power con-

sumption UV Lamps

•UV Intensity Monitor

MICROFILTRATION MODULAR SYSTEMS

Modular system for micro filtra-

tion and water pretreatment up

to 10 m³/h:

• 60 µm hydrociclonic filter

disc

• 25 & 5 µm PP melt blown

microfiltration

• Panel of instruments with

pressure gauges

MULTIMEDIA FILTERS

Multimedia filters are used as

pretreatment in different setups,

like:

• Sand Filters

• Iron&heavy metals removal

• Carbon filters

• Water softeners

CHEMICAL DOSING UNITS

The dosing unit is meant to

dose a chemical into water.

• Pre-chlorination

• Dechlorination

• Coagulation / Flocculation

• Antiscalant

• Post-chlorination

• pH adjustment

REHARDENER/MINERALIZERS

A post-treatment to raise the

hardness and adjust the pH.

• High quality stainless steel

(AISI316L)

or Fibreglass Reinforced

Plastics (FRP)

• Panel of Instruments

• Manual or automatic opera-

tion available

11

T E C H N I C A L S U P P O R T

To support our products and solutions, we

offer both commissioning and training.

T E

ToTo

ofof

E N G I N E E R I N G

We bring you engineering services for turn-

key marine and industrial projects

E N

WeWe

keke

C O N S U L T I N G

We help you with solutions for optimizing

costs of implementation, commissioning

and operation

Wo

rldw

ide

De

ale

r Ne

two

rk &

Tec

hn

ica

l Su

pp

ort


E U R O P E

MASTER MARINE SRL. Country: Italy

Contact: Bruno Crovetto

Tel: +39 010 3291592

Email: [email protected]

KARBERG & SCHMITZ GMBHCountry: Germany

Contact: Frank Pohlmann

Tel: +49 40 38 60 04 27


A M E R I C A

FLUINAMICS Country: Spain

Contact: Mark Gonzalez

Tel: +34 684364002


M I D D L E E A S T

AL DOUSOR INT. CO. LTDCountry: Kingdom of Saudi Arabia

Contact: Sheikh Mohamed Ali

Tel: 00966(012) 2840825/2840827


CONSILIUM MARINE INDIA PVT.LTDCountry: India

Contact: PS Kundu

Tel: +91 22 67935150/ 5152/ 5153


A F R I C A

ELLABBAD MARINE EQUIPMENT & SUPPLY Country: Egypt

Contact: Ahmed Ellabbad

Tel: (+2) 03 4254 24


A S I A

AQUA LOGISTICS PTE. LTD.Country: Malasya

Contact: Zhou Zimian

Tel: +65 6566 5166


ARK VISION SPARE & ENGINEERING PTE LTDCountry: Singapore

Contact: Paul Chan

Tel: 65-6862 3379


HAIBANG INDUSTRIAL GROUP(HK) CO.,LTDCountry: China (Shanghai)

Contact: James Zhou

Tel: +86 21 33878266*608


H E A D O F F I C E

FLUINAMICS

Cmno. do Salgueiro, S/N

36419 Mos - Pontevedra (SPAIN)

Mob. +34 684 364 002

email: [email protected]

2017 Marine & Landbased Technical Brochurefluinamics.com/es/documentacion/catalogo/dossier.pdf ·...

Documents

Transcript of 2017 Marine & Landbased Technical Brochurefluinamics.com/es/documentacion/catalogo/dossier.pdf ·...