20160818 edpc2016 prel progra - VDMA
19
Electric Drives Production 6 International Conference th November 30 – December 1 , 2016 th st Nuremberg, Germany Preliminary Program E| - DPC 2016 Electric Drives Production Conference 2016
Transcript of 20160818 edpc2016 prel progra - VDMA
ElectricDrivesProduction
6 International Conferenceth
November 30 – December 1 , 2016th st
Nuremberg, Germany
Preliminary Program
E| -DPC 2016
Electric Drives Production
Conference 2016
2
CONTENT
PUBLICATION
-ON SITE ORGANIZATION
The international Electric Drives Production Conference andExhibition has been established as an outstanding platform for theexchange of experiences for researchers, product developers,production experts, purchasers and potential users of electricdrives in the last years.
E| 201DPC 6 offers technical presentations in total ofmore than 70 a8 within two days sixtracks : of them concentrate on the core topicsof electric drives production technologies, materials and systems.The focus of the globally accompanying conference on EnergyTransfer Electric Vehicles ( ) is set on the technology offor E|TEVwireless power transmission. And last but not least the conferenceis hosting the track, organized by the GermanE-MOTIVEEngineering Federation ( ).VDMA
Comprehensive industrial exhibitions, poster presentations,technical tours and an inspiring social program will complementthe conference and create a sustainable experience for everyparticipant.
The is located n the oyer.registration desk o ground level in f
Opening time :ConferenceWednesday November 30 6 8 7, 201 :00 - :00th AM PMThursday December 1 6 7, 201 8:00 - :00st AM PM
Phone: +49 (9122) 3074 527
Mobile +49 (157) 8167 1737:
Opening time Table Top Exhibition:
Wednesday November 30 6 9:00 - 5:00, 201th AM PMThursday December 1 6 9:00 - 5:00, 201st AM PM
All registered and accepted papers will be theincluded inconference proceedings publishedand also at ,ieeexplore.orgscopus.com scholar.google.comand .
E|ABOUT DPC
Conference bags can be picked up at the registration desk.On-spot registrations for the conference, the technical tours,and receptionthe evening will be possible.
and by credit cardOn-site payments can be settled in cash ( ) .EUR
Free WiFi is available in all rooms of the exhibtion centre.
C NO TENT............................................................ 2
PARTNERS ......................................................... 3
COMMITTEES................................................... 4
T S - OVERVIEWIME CHEDULE .................. 5
T S DIME CHEDULE ETAILED- .......................6
TECHNICAL TOURS.........................................10
SPONSORS......................................................... 10
O -S TE PN I LAN.................................................. 11
EXHIBITION....................................................... 12
SOCIAL PROGRAM........................................ 13
APPROACH........................................................ 14
ETG - The Power Engineering
Society of the VDE
www.vde.com/etg
FVA - Research Association for
Drive Technology
www.fva-net.de
IHK Mittelfranken
www.ihk-nuernberg.de
Insitute for Factory Automation
and Production Systems
www.faps.de
MHI - German Society for
Assembly, Handling and
Industrial Robots
www.wgmhi.de
City of Nuremberg
www.nuernberg.de
Nuremberg Metropolitan Region
www.metropolregionnuernberg.de
PELS -
Power Electronics SocietyIEEE
www.ieee-pels.org
The Magnetics SocietyUK
www.ukmagsoc.org
VDMA -
German Engineering Federation
www.vdma.org
The 6 International Electric Drives Production Conference is kindly supported by the following organizations:th
Aconf - Platform for international
academic conferences
www.aconf.org
AMA - Association for
Sensors and Measurement
www.ama-sensorik.de
antriebstechnik - Technical
Magazine for Engineering
www.antriebstechnik.de
Automation Valley Nordbayern
www.automation-valley.de
Bayern Innovativ
www.bayern-innovativ.de
Bundesverband eMobilität e.V.
http://www.bem-ev.de/
Bühler Mechatronic Award
http://www.buehlermotor.com/ /DE
Mechatronic-Award
Cluster Mechatronik &
Automation e.V.
www.cluster-ma.de
ECPE -
The Industrial Research Network
for Power Electronics in Europe
www.ecpe.org
Electrical Manufacturing Coil
Winding Association
www.emcw.org
3
PARTNERS
INTERNATIONAL CONFERENCE COMMITTEE
CONFERENCECHAIRMAN
Prof. Franke J.,University of Erlangen-Nuremberg ( )DE
PUBLICATIONCHAIRMAN
Prof. Hahn I.,U ( )niversity of Erlangen-Nuremberg DE
LOCAL ORGANIZINGCOMMITTEE
Prof. Becker S.,University of Erlangen-Nuremberg ( )DE
Prof. Drummer D.,University of Erlangen-Nuremberg ( )DE
Prof. Feldmann K.,University of Erlangen-Nuremberg ( )DE
Prof. Kremser A.,Technische Hochschule Nuernberg ( )DE
Kuehl A.,Dr.University of Erlangen-Nuremberg ( )DE
Prof. Piepenbreier B.,University of Erlangen-Nuremberg ( )DE
Prof. Willner K.,University of Erlangen-Nuremberg ( )DE
Prof. Kolar J.,ETH CHZuerich ( )
Prof. Mebolt M.,ETH CHZuerich ( )
Prof. Meins J.,TU DEBraunschweig ( )
Prof. MiUniversity of Michigan (US)
PD Dr. Moeckel A.,Technical University ofIlmenau ( )DE
Prof. Monkman G.,OTH DERegensburg ( )
Prof. Muetze A.,TU ATGraz ( )
Noguchi K.,Aichi Steel Corporation ( )JP
Dr. Ombach G.,Qualcomm CDMATechnologies GmbH ( )DE
Prof. Parspour N.,University of Stuttgart ( )DE
Pollmeier S.,VDE DEPower Engineering Society ( )
Prof. Reinhart G.,Technische Universitaet Muenchen ( )DE
Dr. Risch F.,BMW AG DE( )
Robens E.,FVA VDMA DEim ( )
Dr. Sakki R.,ABB FILtd ( )
Prof. Schluecker E.,University of Erlangen-Nuremberg ( )DE
Prof. Schmidt M.,University of Erlangen-Nuremberg ( )DE
Prof. Shinohora R.,Kyoto University ( )JP
Prof. Steinhilper R.,University of Bayreuth ( )DE
Prof. Suh I.-S.,Korea Advanced Institute of Scienceand Technology ( )KR
Prof. Thoms V.,Dresden University of Technology ( )DE
Dr. Turki F.,Paul Vahle GmbH & Co. ( )KG DE
Prof. Verl A.,Fraunhofer-Gesellschaft ( )DE
Dr. Vitek O.,Brno University of Technology ( )CZ
Prof. Voigt K.-I.,University of Erlangen-Nuremberg ( )DE
Prof. Volk W.,Technische Universitaet Muenchen ( )DE
Dr. Waasner M.,Gebr. Waasner GmbH ( )DE
Prof. Werner R.,TU DEChemnitz ( )
Prof. Abele E.,Technical University Darmstadt ( )DE
Baumueller A.,Baumueller GmbH ( )DE
Dr. Boehm R.,Buehler Motor GmbH ( )DE
Dr. Brandes J.,Siemens ( )AG DE
Prof. Covic G.,The University of Auckland ( )NZ
Prof. Dietz A.,Technische Hochschule Nuernberg ( )DE
Prof. Doppelbauer M.,Karlsruhe Institute of Technology ( )DE
Prof. Ehmann B.,University of Queensland ( )AU
Prof. Endisch C.,Technische Hochschule Ingolstadt ( )DE
Prof. Fleischer J.,Karlsruhe Institute of Technology ( )DE
Prof. Frey L.,Fraunhofer ( )IISB DE
Fritsch W.,GreiffenbergerABM
Antriebstechnik GmbH ( )DE
Prof. Gerling D.,Universitaet der BundeswehrMuenchen ( )DE
Dr. Goth C.,Conti Temic microelectronic GmbH (DE)
Prof. Hackstein D.,University of Hagen ( )DE
Prof. Haerri V.,Lucerne University of Applied Sciencesand Arts ( )CH
Prof. Hameyer K.,Aachen ( )RWTH DE
Prof. Hu J.,University of Michigan ( )US
Dr. Junker S.,Robert Bosch GmbH (DE)
Prof. Kampker A.,RWTH DEAachen ( )
INTERNATIONALPROGRAM COMMITTEE
4
9:00 AM Foyer NCC West
9:30 AM Opening Session Room Paris
11:00 AM Foyer NCC West
Room Paris Room London Room Zuerich Room Amsterdam
11:30 AM Stator WindingTechnologies
New Approaches for
Rotor Production
New Design for
Permanent Magnet
Drives
Power Electronics for
Electric Drives
1:00 PM Foyer NCC West
2:30 PM Winding Technologiesfor Series Production
Substitution of
Rare Earth Materialsin Electric Drives
Simulation and
Modeling
4:00 PM Foyer NCC West
4:45 PM Potentials ofAdditive Manufacturing
Magnetic Quality
Control
Innovative Approaches
for Electric Drives
Technology
for Quality Assurance
7:30 PM Evening Reception
Welcome AddressGuided Walking Tours
Room Paris Room London Room Zuerich Room Amsterdam
9:00 AM Innovations inInsulation Technologies
Production Impacts on
Soft Magnetic Materials
New Approaches for
Production Planning
E-MotiveTrack 1
10:30 AM Foyer NCC West
11:15 AM Insulation Technologiesfor Mass Production
Innovative Production
Methods forLaminations
Industrie 4.0 in
Electric DrivesProduction
E-MotiveTrack 2
12:45 PM Foyer NCC West
2:15 PM ContactingTechnologies
Loss Mechanisms in
Laminations
Innovative
MeasurementTechnologies
E-MotiveTrack 3
3:45 PM Foyer NCC West
4:15 PM Closing Session Room London
5:00 PM End of Conference
Tuesday, November 29 th, 2016
Wednesday, November 30 , 2016th
Thursday, December 1 , 2016st
Welcome Coffee
Coffee Break
Lunch Break & Postersession
Coffee Break
Ofenwerk Nuremberg Tab
leTo
p E
xh
ibitio
n
Coffee Break
Lunch Break & Postersession
Coffee Break
TIME SCHEDULE
OVERVIEW
5
6
TIME SCHEDULE
Wednesday, November 30 , 2016th
9:30 AM Opening Session: Room Paris
11:00 AM Coffee Break in Foyer NCC West
Session 1: Room Paris Session 2: Room London
New Approaches for Rotor Production
11:30 AM Selective Assembly of Permanent Magnets forreduced Rotor Unbalance
Manuel P., Karlsruhe Institute of Technology (DE)
12:00 PM In-Line strategies and methods to reducebalancing efforts within rotor productionfor electric drives
Hofmann B., University of Erlangen-Nuremberg (DE)
12:30 PM Increasing the energy efficiency of themagnetization process
Meyer A., University of Erlangen-Nuremberg (DE)
1:00 PM Lunch Break & Postersession in Foyer NCC West
Session 5: Room Paris Session 6: Room London
Substitution of Rare Earth Materials in Electric Drives
2:30 PM Permanent magnets as critical materials inadvanced electric drives
Dr. Gauß R., Fraunhofer ISC IWKS, Hanau (DE)
3:00 PM Ultra premium efficiency (IE5 class) magnet-freeSynchronous Reluctance Motor
Dmitrievskii V., Ural Federal University, Yekaterinburg ( )RU
3:30 PM Optimized electromagnetic and manufacturingdesign for a BLDC-Motor substitutingrare-earth magnets
Neubauer A., Mahle International GmbH, Stuttgart ( )DE
4:00 PM Coffee Break in Foyer NCC West
Session 9: Room Paris Session 10: Room London
Potentials of Additive Manufacturing (AM) Magnetic Quality Control
4:45 PM Additive manufacturing of NdFeB forthe production of rare-earth magnets
Urban N., University of Erlangen-Nuremberg ( )DE
Prediction of electric motor performance byin-line testing of permanent excited rotors
Meyer A., University of Erlangen-Nuremberg (DE)
5:15 PM Additive Manufacturing of a Lightweight Rotor for aPermanent Magnet Synchronous Machine
Lammers S., Direct Manufaturing Research Center ( )DE
Magnetic stray field measurement ofmagnetic specimen
Heyder A., Robert Bosch GmbH, (DE)
5:45 PM Potentials of Additive Manufacturing forAutomotive Suppliers
Tremel J., Robert Bosch GmbH (DE)
Investigation of Sensitivities onTolerance Induced Power Fluctuation of anInternal Permanent Magnet Drive Machine
Balluff M., Daimler AG, Stuttgart (DE)
7:30 PM Evening Reception
The blue timeslots are marking the application-oriented presentations by industrial authors.
Stator Winding Technologies
Winding Technologies for Series Production
Presentation requested
Kiefer D., MARSILLI S.p.A., Castelleone (IT)
Presentation requested
Sell-Le Blanc F., Aumann GmbH, Espelkamp (DE)
Presentation requested
Lang T., SMZ Wickel- und Montagetechnik, Würenlos (CH)
Optimization Algorithms for Maximizing theSlot Filling Factor of Technically FeasibleSlot Geometries and Winding Layouts
Herrmann P., Technische Hochschule Ingolstadt ( )DE
Simulation of the Assembly Process of theInsert Technique for Distributed Windings
Hofmann J., Karlsruhe Institute of Technology (DE)
Empowering a needle winding machine for theflexible production of multivariant stators
Masuch M., University of Erlangen-Nuremberg (DE)
TIME SCHEDULE
Wednesday, November 30 , 2016th
7
Opening Session: Room Paris 9:30 AM
Coffee Break in Foyer NCC West 11:00 AM
Session 3: Room Zürich Session 4: Room Amsterdam
New Designs for Pemanent Magnet Drives Power Electronics for Electric Drives
Design and Construction of a permanent magnetexcited Flux-Switching-Machine
Lehr M.,Technische Universität Darmstadt ( )DE
11:30 AM
Modeling and Design of PM Retention Sleeves forHigh-Speed PM Synchronous Machines
Dr. Porru M., University of Cagliari ( )IT
12:00 PM
The Design Method for High Efficiency PMA-SynRM
Lee J., ( )Hanyang University KR
12:30 PM
Lunch Break & Postersession in Foyer NCC West 1:00 PM
Session 7: Room Zürich Session 8 : Room Amsterdam
Simulation and Modelling E|TEV
Numerical Vibration Analysis of Electric Drives
Bachinski-Pinhal D., CADFEM GmbH, Grafing ( )DE
Enrichment and Analytics of Charing Transaction Data
von Hoffen M., Universität Münster (DE)
2:30 PM
Analytic Model of Structural Effects in Toroid Coreswith Rectangular Cross Section
Hauser W., University of Erlangen-Nuremberg (DE)
Single-Seater Vehicle Prototype Experiment Poweredby High Frequency Electric Field on anAsphalt-Paved Roadway
Prof. Sakai N., Toyohashi University of Technology (JP)
3:00 PM
Experimental and calculational analysis of themodal behavior of squirrel cage rotors
Großhauser J., Siemens AG (DE)
High Power three-phased Wireless Battery Charger withlow Stray Field fed by a single-phased Inverter
Dr. Turki F., Paul Vahle GmbH & Co. KG, Kamen ( )DE
3:30 PM
Coffee Break in Foyer NCC West 4:00 PM
Session 11: Room Zürich Session 12: Room Amsterdam
Innovative Approaches for Electric Drives Magnetic Measurement for Quality Assurance
Control of synchronous-reluctance-motors withoutencoder for industrial applications
Weigel T., Siemens AG ( )DE
From simple magnets to magnetic rotors –fast and precise measurements for yourproduction environment
Holzhey R., Innovent e.V., Jena ( )DE
4:45 PM
A Variable Reluctance REsolver Magnetic-CircuitSimulation with Test Bench Verification
Neidig N., Daimler AG, Stuttgart (DE)
BLDC-motor Production Process surveillance based onParameter Identification Method
Dr. Hillenbreand F., imc Meßsysteme GmbH, Berlin (DE)
5:15 PM
High Speed Flux Reversal Motor
Dmitrievskii V., Ural Federal University, Yekaterinburg (RU)
Contribution Announced
Peters V., Fraunhofer IIS (DE)
5:45 PM
7:30 PMEvening Reception
Flexible Printed Circuits: The wide range ofsmart connection
Kleefeldt S., Mektec Europe GmbH, Weinheim ( )DE
Wu C., Dynex Semiconductor, Lincoln (UK)
Miric, A., DE)Heraeus Deutschland GmbH & Co KG, Hanau (
Innovative Material Packaging Solutions for superiorPower Electronics Devices
Temperature Prediction of DC-Link Film CapacitorApplied in the Electrical Driving System ofElectric Vehicle
The blue timeslots are marking the application-oriented presentations by industrial authors.
Session 13: Room Paris Session 14: Room London
Production Impacts on Soft Magnetic Materials
9:00 AM Influences of separation and joining processes onsingle tooth laminated stacks
Kraemer A., Karlsruhe Institute of Technology (DE)
9:30 AM Numerical homogenization and simulationof a lamination stack
Baloglu M., University of Erlangen-Nuremberg (DE)
10:00 AM Influence of Axial Mechanical Stress on theMagnetic Properties of Non-Oriented Electrical Steel
von Pfingsten G., RWTH Aachen University (DE)
10:30 AM Coffee Break in Foyer NCC West
Session 16: Room Paris Session 17: Room London
Innovative Production Methods for Laminations
11:15 AM Rotary cutting of Electrical Steel Strip Rotary cutting ofElectrical Steel Strip in Stamp and Die Arrangement
Hubert M., University of Erlangen-Nuremberg (DE)
11:45 AM Effect of stress relief annealing condition on themicrostructure and magnetic properties ofnon-oriented electrical steel
Dr. Park J., POSCO Technical Research Laboratories ( )KR12:15 PM Segmentation with Backlack
Stauble T., SWD AG, Densbüren (CH)
12:45 PM Lunch Break & Postersession in Foyer NCC West
Session 19: Room Paris Session 20: Room London
Contacting Technologies Loss Mechanisms in Laminations
2:15 PM Quantification of the influence of varying electrodeshapes and materials on the thermo-crimping process
Spreng S., University of Erlangen-Nuremberg (DE)
Influence of cutting edge on core loss induced throughvarious manufacturing parameters
Schneider M., University of Erlangen-Nuremberg (DE)2:45 PM Innovative Approaches for the Removal of the
Insulation of Magnetic Wire
Gläßel T., University of Erlangen-Nuremberg (DE)
Eddy current loss analysis of coated permanent magnetsin synchronous machines
Gerlach T., Technische Hochschule Nuremberg (DE)
3:15 PM Contacting Processes for Series Production ConcerningQuality Aspects
N.N.
Improved Calculation of Iron Losses inLarge Salient-pole Synchronous Hydro-generators
Jacobs S., ArcelorMittal (LU)
3:45 PM Coffee Break in Foyer NCC West
4:15 PM
4:40 PM
4:50 PM Closing Words: Prof. Franke J., University of Erlangen-Nürnberg ( )DE
Best Paper Award:Prof. Feldmann K., University of Erlangen-Nürnberg ( )DE
Buehler Mechatronic Award: Muhr P., Buehler Motor GmbH, Nuremberg ( )DE
Closing Session: Room London
TIME SCHEDULE
Thursday, December 1 , 2016st
8
The blue timeslots are marking the application-oriented presentations by industrial authors.
Innovations in Insulating Technologies
Insulation Technologies for Mass Production
Thin-walled injection molding for slot insulationof long stator sheet stacks
Kleine Büning M., RWTH Aachen University (DE)
Theoretical benefits of powder coatings regardingcopper fill factor of electric machines
Hoffmann B., University of Erlangen-Nuremberg ( )DE
Contribution Announced
Rasp R., CopperIng
Advanced insulation systems for cost-effective,high power density e-motors
Bonnett J., Victrex Technology (DE)
Impregnation of Hybrid and Electric Motors.Temperature process and quality effect formassive production
Motta C., bdtronic GmbH, Weikersheim ( )DE
Kuschnerus M., ELANTAS Beck GmbH (DE)
Potentials of innovative flexible sheet insulationin rotating electric machines
TIME SCHEDULE
Thursday, December 1 , 2016st
9
Session 15: Room Zürich Session E-MOTIVE : Room AmsterdamI
Design of Electric Drives Production Systems N.N.
Guidelines for the production planning process underuncertainty regarding the degree of automation
Fisel J., Karlsruhe Institute of Technology (DE)
Approaches towards Market Analysis andCommercialization of Electric In-wheel Motorsfor Light Vehicles
Sachs C., University of Stuttgart ( )DE
9:00 AM
Robust Design Optimization of Electrical Machinesand Drive Systems for High Quality Mass Production
Dr. Lei G., University of Technology Sydney ( )AU
Interests and attitudes on the subject ofelectric mobility
Heß J., Technische Universität Chemnitz (DE)
9:30 AM
The Least Energy Demand Method as unique tool toevaluate and rate the energy efficiencyof the Electric Drives Production
Kreitlein S., University of Erlangen-Nuremberg (DE)
10:00 AM
Coffee Break in Foyer NCC West 10:30 AM
Session 18: Room Zürich Session : Room AmsterdamII E-MOTIVE
Production Optimization with Methods of Industry 4.0 N.N.
Towards an inline quick reaction system for actuatormanufacturing using data mining
Sand C., Robert Bosch GmbH (DE)
N.N.
N.N.
11:15 AM
Automated Quantification of Tool Wearing Conditionsusing Predictive Analytics
Fleischmann H., University of Erlangen-Nuremberg (DE)
N.N.
N.N.
11:45 AM
Potentials of Industry 4.0 of the production ofpermanent excited rotors
Abersfelder S., Robert Bosch GmbH (DE)
N.N.
N.N.
12:15 PM
Lunch Break & Postersession in Foyer NCC West 12:45 PM
Session 21: Room Zürich Session : Room AmsterdamIII E-MOTIVE
Innovative Measurement Technologies N.N.
Comparison analysis of the magnetic field and themagnetic force inside of an electromagnetic actuatorwith the use of an anchor measuring sensor
Heyder A., Robert Bosch Gmb (DE)
2:15 PM
Holistic Production Analysis forActuator Manufacturing using Data Mining
Sand C., Robert Bosch GmbH (DE)
2:45 PM
Non-standard measurements and new technology forsoft magnetic material testing usingdigital feedback control
Siebert S., Dr. Brockhaus Messtechnik GmbH & Co. KG (DE)
3:15 PM
Coffee Break in Foyer NCC West 3:45 PM
4:15 PM
4:40 PM
4:50 PM
Electric Powertrain for Helicopter Tail Rotor
Castellini L., Umbra Cuscinetti S.p.A. (IT)
Buehler Mechatronic Award: Muhr P., Buehler Motor GmbH, Nuremberg ( )DE
Best Paper Award:Prof. Feldmann K., University of Erlangen-Nürnberg ( )DE
Closing Words: Prof. Franke J., University of Erlangen-Nürnberg ( )DE
Closing Session: Room London
The blue timeslots are marking the application-oriented presentations by industrial authors.
E-MOTIVE Trackreserved for
VDMA
E-MOTIVE Trackreserved for
VDMA
POSTERSESSION Foyer NCC Westin
Wednesday, November 30 , and Thursday, December 1 , 2016th st
The Organizing Committee sincerely thanks the following and companies for sponsoringorganizations E| 2016:DPC
SPONSORS
10
IEEE
www.ieee.org
Technical Co-Sponsor
Benefits of an universal winding machine
Mahr A., University of Erlangen-Nuremberg (DE)
GOLD SPONSOR
ALUMINIUM SPONSOR
Floor Plan
Exhibition Centre Nuremberg
ON SITE PLAN-
E| -DPC 2016
Electric Drives Production
Conference 2016
11
V i I &ened g II
Entrance
InfoLevel 0
London
Tunis Amsterdam
Dublin
ZürichParis
Level 2
Madrid
Level 1
PresseCentr
Cannes
E| 2016 will take place at the NürnbergConventionDPCCenter ( )West of NuernbergMesse.NCC
The subway station is located at the„Messe“west theentry of Nuremberg Exhibition.
You will find the
� Conference nformation esk located n level 0and Exhibition i d o� Table Top exhibition in level 0 and 1� Conference in level 2
The International Electric Drives Production Conference offers an outstanding platform for the exchange ofexperiences for developers, researchers and potential users. The focus of the conference will be set on thepresentation of highly innovative products from various industries as well as manufacturing processes andstrategies. Additionally there will be an accompanying industrial exhibition, tutorials, poster presentation,technical tours and an associated program.The E| will be completed by a comprehensive exhibition, directly connected to the E| 2016DPC DPCConference. Companies, research institutes and other organizations will be offered the opportunity topresent their products and services to all participants.� You will meet developers and manufacturers of electric drives and generators� You will get the opportunity to answer specific technical questions from trade visitors� As an exhibitor you will be along the production chain and the production-related cross-cutting issues for
electric drives and generators
| FULL SERVICE BOOTH PACKAGE
� Booth 2m x 2m (table top in Foyer)
� 1 E|DPC conference ticket
� 1 table and 2 chairs provided by NürnbergConvention Center
� power connection, triple plug outlet,FI protection switch, power consumption
� listing on our website www.edpc.eu withlink to your website
� further services like high-voltage current,stand guards, equipement etc. can beo r d e r e d d i r e c t l y a t t h e N ü r n b e r gConvention Center at your own expense
€ 60,-
Full Service Booth Package*
additional booth space /m²
€ 0,-150
| INSTALLATION
Tuesday, November 29 , 2016, 1:00 -7:00 PM;th PM
| DISMANTELING
Thursday, December 1 , 2016, 6:00 -9:00st PM PM;Partial or complete dismantling of displays before the officialclosing of the Exhibition on Thursday, December 1 , 2016 isst
expressly prohibited.
For more information please visit www.edpc.eu.
Table Top Exhibition
Wednesday, November 30 , and Thursday, December 1 , 2016th st
12
All Prices plus VAT* Gold Sponsors save 20% (see Sponsorship Packages)Refunds, minus a €100 processing fee, will be made forbooth cancellations if cancelled before October 1, 2016. Ifcancelled after October 1, 2016 the full booth fee must bepaid.
13
GUIDED WALKING TOURS
Parallel to the several half-hour guidedevening reception.tours will be offered free of charge
AGENDA of the Evening Reception
07:30 :PM Welcome Address
07:45 :PM Opening of the buffet
08:30 :PM Get-Together
BUFFET
A regional buffet will be prepared and served.
Coypright City of Nuremberg
Bildrechte Stadt Nürnberg
SOCIAL PROGRAM
Wednesday, November 30 , 2016th
EVENING RECEPTION
The E| 201 vening is an official stand-upDPC 6 E Receptionreception. Detailed technical discussions are guaranteed andaccompanied by piano background music and a carriedfranconian buffet. Registered members will be informed timelyabout the location.
Coypright City of Nuremberg
TOURIST INFORMATION
Nuremberg Convention and Tourist OfficeFrauentorgraben 390443 Nuremberg
Tel.: +49 (911) 2336 0http://www.tourismus.nuernberg.de/
HOTEL RECOMMENDATION
For hotel recommendation please contact thetourist office Nuremberg:
Tel.: +49 (911) 2336 121http://www.hotel.nuernberg.de
For your accommodation several hotels are booked all over the city.For prices and reservation, please use the reservation form on ourwebsite www.edpc.eu.
Nürnberger Christkindlesmarkt
The famous Nürnberger Christkindlesmarkt will take place fromNovember 25 to December 24 , 2016.th th
A visit during E|DPC 2016 will be possible.
Copyright : City of Nuremberg
Copyright : BlackLight Films - Louie SchwartzbergCopyright : business2community
Copyright Bilder: City of Nuremberg
14
MAP OF THE CITY OF NUREMBERG
ChristkindlesmarktHauptmarkt, Nuremberg
E|DPC 2016Messezentrum 1, Nuremberg
APPROACH
| BY CAR
You may reach E| via car fromDPC the ighway:h
- A9: 52 FischbachTake exit -- A6: Take exit 59 - Langwasser- A73: Take exit 34 - ZollhausYour navigation system will find NuernbergMesse if you enter„Karl-S c h o e n l e b e n - S t r a s s e “ a s a d d r e s s o r M e s s e z e n t r u mas a special destination.
| BY PUBLIC TRANSPORTATION
To reach E| fromDPC Nuremberg Main Station:
- Take subway no. 1 or 11 in direction “Langwasser“- Take Messestop “ ”
To reach E| fromDPC Nuremberg Airport:
- Take subway no. 2 in direction “Roethenbach“- Take Main Stationstop “ ”- Take subway no. 1 or 11 in direction “Langwasser“- Take s esse”top “MPlease find more on the www. .Information website vgn.de
Copyright Nuremberg Convention Center
| HIGHWAYS TO NUREMBERG
| SUBWAY LINES IN NUREMBERG
U11U1
U2
Airport
Main Station
ConventionCenter
Lorenzkirche
Downtown / Evening Reception
15
Munich
A9A3
A6
A73
Berlin
Wien
Frankfurt
Nuremberg
E|HOME KOLLOQUIUM 2016
E|HomeSymposium
30. November - 01. Dezember 2016
Messe Nürnberg
Mit dem 1. E|Home-Symposium präsentiert das bayerische Technologiezentrum für privates Wohnen
(E|Home-Center) erstmals umfassend seinevom 30. Dezember 2016November bis 01.
Forschungsergebnisse. Diese entstammen einem interdisziplinären Forschungsverbund aus 13
Hochschulpartnern und mehr als 20 Unternehmen, der Fragestellungen rund um das Themenfeld des
ressourcenschonenden, selbstbestimmten und intelligenten Wohnens adressiert. Die Veranstaltung findet
im Rahmen des 3. Green Factory Bavaria Kolloquiums auf der statt.Messe Nürnberg
IntelligenteHeimvernetzung
InnovativeHeizsysteme
Ambient AssistedLiving
Usabilityim Smart Home
EnergieeffizientesWohnen
VERANSTALTUNG
THEMENSPEKTRUM
Komfort & Sicherheit
Energiemanagement Infotainment
© m
ark
us d
ehlz
eit -
Foto
lia.c
om
GREEN FACTORY BAVARIA KOLLOQUIUM 2016
Green FactoryKolloquium
30. November - 01. Dezember 2016
Messe Nürnberg
Copyright: Mühlhäußer
Auf dem 3. Green Factory Bavaria Kolloquium präsentieren vom 30. November bis 01. Dezember 2016
über 40 Forschungsprojekte, getragen von Forschungsinstituten an 13 bayerischen Standorten in
Zusammenarbeit mit über 80 Industriepartnern, die Ergebnisse aus dem Forschungsverbund Green
Factory Bavaria zum Thema Energie- und Ressourceneffizienz in der Produktion. Die Veranstaltung findet
an Messe Nürnberg statt. Das Ofenwerk bietet am 30. November die Kulisse der Abendveranstaltung in
Kooperation mit der E| 2016.DPC
Energieeffizienz inder Umformtechnik
Lösungen zurEffizienz-steigerung
Energieeffizienz imElektromaschinenba
Energieeffizienz inder Kunststofftechnik
EnergieeffizienteSchweiß- und
NachhaltigeProduktions-
EffizienteAnlagentechnik zur
Energieeffizienzdurch Planung- und
Effiziente Prozess-und
Energieeffizienz inder
EffizienteFabrikplanung und
Einsatz effizienterAn-triebe und
30.09.
30.11.
01.12.
VERANSTALTUNG
PROGRAMMAbendveranstaltung
am 30.11.2016
| E DPC Office:|
c/o: FAPS-TT GmbHFürther Straße 246 Tel: +49 ( )b 9122 3074 527D - 90429 Nürnberg Fax: +49 (91 )22 3074 [email protected] www.edpc.eu
Are you interested in supporting the E|DPC conference and presenting your company or institute as asponsor? With the following packages the E|DPC is the ideal platform for the individual advertising of yourinnovative products and services:
| ALUMINIUM PACKAGE
1. You are listed as an officialAluminium Sponsor of theE|DP Conference 2016 withyour logo� on the E|DP Conference
homepage with a link toyour own homepage,
� the proceedings,� the program booklet,� the conference posters
presented on billboards atthe venue,
� on all organizational slidesshown at the conference,and
� all printed conferencerelated matters (call forpapers, invitation,conference program, etc.)which are distributedelectronically by email, onpaper by standard mail orat the conference.
2. Your company will be enabledto sponsor specific congressitems or give-aways; your logowill be printed on them, e.g.� congress bags� batch lanyards� writing pads� ball pens or pencils� others on request(first come, first served)
| COPPER PACKAGE
1. You are listed as an officialCo p p e r S p o n s o r o f t h eE|DP Conference 2016 withyour logo (see aluminiumpackage) .
2. Your company will be enabledto sponsor specific congressitems or give-aways (seealuminium package).
3. Your company will be allowedto enclose companyonebrochures in the congress bag.
4. P a r t i c i p a t i o n f e e s f o remployees of your companyare reduced by 10 %.
5. Participation fees for guestswho are invited by you andwhich are paid by you arereduced by 10 %.
6. You may print one half-pageadvertisement (color)� in the printed conference
proceedings and� in the program booklet
7. Your company will be enabledto sponsor specific congressevents, e.g.� coffee breaks� lunch breaks� congress dinner� others on request
(first come, first s e r v e d )
| GOLD PACKAGE
1. You are listed as an officialG o l d S p o n s o r o f t h eE|DP Conference 2016 withyour logo (see aluminiumpackage) .
2. Your company will be enabledto sponsor specific congressitems or give-aways (seealuminium package).
3. Your company will be allowedto enclose companytwobrochures in the congress bag.
4. P a r t i c i p a t i o n f e e s f o remployees of your companyare reduced by 20 %.
5. Participation fees for guestswho are invited by you andwhich are paid by you arereduced by 20 %.
6. You may print one full-pageadvertisement (color)� in the printed conference
proceedings and� in the program booklet
7. Your company will be enabledto sponsor specific congressevents (see copper package).
8. Your company will be enabledto present products andservices within the Table TopExhibition with a reduced feeof 20% (see exhibition fullservice package).
SPONSORING PACKAGESfor the 6 e
thInternational Conferenc
Electric Drives ProductionNovember 30 December 1 6
t sth- , 201 , Nuremberg, Germany
E|DPC-2016
Electric Drives Production
Conference and Exhibition
€ 2.000
€ 3.000
€ 5.000
REGISTRATION RELEASE FORM
VENUE
NürnbergMesse GmbH - WestNCCMessezentrum, 90471 Nuremberg
Conference ContactFAPS-TT GmbH
phone: +49 (9122) 3074 527fax: +49 (9122) 3074 529
email: [email protected]: www.edpc.eu
VENUE
E| 201 will take place at the Nuernberg Convention Center ( )DPC NCC6 West of Nuernberg Messeon , 201 . For your accommodation several hotels are bookedNovember 30 and December 1 6t sth
all over the city. For prices and reservation, please use the reservation form on our websitewww.edpc.eu. Nuremberg boasts a unique mixture of tradition and modern times. Both peopleborn here and people who moved here appreciate its extraordinary quality of life. At the sametime, Nuremberg is a modern city with 500,000 inhabitants, and the centre of a prosperingEuropean metropolitan region with 2.5 million inhabitants. Its almost thousand years of historyare still obvious in its cityscape. Please find more information at www.nuernberg.de.
TABLE TOP EXHIBITION
E| 201 will be completed by a xhibition. Companies, researchDPC 6 focussed Table Top Einstitutes and other organizations will be offered the opportunity to present their products andservices to all participants. For any further questions regarding E|the Table Top ExhibitionDPCplease contact ( )the E|DPC Office [email protected] or visit the website www.edpc.eu.
SPONSORSHIP
Are you interested in supporting E| 201 and presenting your company or organizationDPC 66as a sponsor? E| 201 is the ideal platform for the individual advertising of yourDPC
innovative products and services. For further information, please visit our website.www.edpc.eu/sponsoring-partners
CONFERENCE FEE
Includes access to all conference sessions, access to the exhibition,participation at the evening reception, coffee and lunch breaks,conference proceedings (printed and electronic).
S o 8tandard Fee 9 0,- € plus VATReduced Fee* 580,- € pluso VAT
Voucher code: _______________
I also register for
o Evening includedReception ( )
* Reduced fee for International Program Committee members,speakers and university members. All prices plus .VAT
Copyright City of Nuremberg
Copyright Mesago Messe Frankfurt GmbH
By registering to the E| onference you agree to store,DPC Cadministrate and use your personal data for the generationof your invoice and for informing you continuously aboutthe latest research results and technology transfer activitiesof the Institute for Factory Automation and ProductionSystems ( ) of the University of Erlangen-NurembergFAPS andof - GmbHFAPS TT . Your personal data will not be transferredto third parties. If you do not wish to receive furtherinformation, please inform us immediately.
With the registration you also agree that photographs ofyour person be taken during the E| on . Thecan C ferenceDPCUniversity of Erlangen-Nuremberg shall have the non-exclusive, transferable, worldwide right in perpetuity toexploit such photographs in any and all forms, including, butnot limited to reporting on the aforementioned con .ference
Cancellations received in writing prior to , 201October 30 6th
will be refunded less a 100 administration fee.,- € plus VATOctober 30 6After , 201 the fee will be fully charged.th
By fax: +49 (911) 5302 9070 Online: www.edpc.euBy email: [email protected]
For the fax registration please use the following registration form:
Salutation ___________________ Title __________________________
First Name _________________________________________________
Last Name _________________________________________________
Company Name _____________________________________________
Department ________________________________________________
Street/Unit number __________________________________________
Postal Code ____________ City ________________________________
Country ___________________________________________________
Phone ____________________________________________________
Fax ______________________ Mobile phone _____________________
email _____________________________________________________
Conference Organizer:E| office, c/o - GmbHDPC FAPS TTFuerther Straße 246b, D-90429 Nuremberg
