2015/16 - Gardening Aids Ltd . 137 Wairau Road Auckland · 2020-07-19 · Suits model T540XP...
Transcript of 2015/16 - Gardening Aids Ltd . 137 Wairau Road Auckland · 2020-07-19 · Suits model T540XP...
2015/16 ACCESSORIES
2 | CONTENTS CONTENTS | 3
CONTENTS
PAGE 4• Arborist Accessories
PAGE 5• Axes
PAGE 6• Chain & Bar Maintenance Equipment• Forest Tools & Accessories
PAGE 8• Lubricants & Fuel Containers
PAGE 9• Harnesses
PAGE 10• Trimmer & Brushcutter Accessories
PAGE 11• Blower Accessories
PAGE 12• Battery Accessories• Protective Clothing
PAGE 14• Safety Helmets, Hearing &
Eye Protection
PAGE 15• Safety Footwear• Automower® Accessories
PAGE 16• Wheeled Accessories
PAGE 18-25
• Technical Specifications Glossary
IMPORTANT INFORMATION
Husqvarna conducts continuous product development and reserves the right to change designs, specifications and equipment levels without prior notification. Always read the instructions carefully before use, as products with moving parts can be dangerous if used incorrectly. All images in the catalogue are for illustrational purposes only. All technical data was current at the time of printing, however these may change as a result of further product development. Product availability, standard features and equipment may vary from market to market. Optional equipment may be purchased at an additional cost. Please check with your Husqvarna dealer for products recommended and approved in your market.
HUSQVARNA TAKES CARE OF YOU AND YOUR EQUIPMENT.A good job becomes better, safer and more enjoyable with the right accessories, protection and clothing. So when we develop accessories, supplementary tools and clothing, we apply the same thinking as when we develop our other products: We listen to the most demanding customers and let their views form the basis for our product design and our choice of materials.
AXESARBORIST ACCESSORIESAXES | 54 | ARBORIST ACCESSORIES
TECHLITE™ BAR - ARBORIST20 % lighter than a regular laminated bar and with 25 % better rigidity. It’s less susceptible to bending and has a low weight, which gives a more balanced chainsaw.
5768307-45 12” bar 3/8” Mini TechLite™ Small bar mount 1.3mm
5768307-52 14” bar 3/8” Mini TechLite™ Small bar mount 1.3mm
TECHNICAL EXTREME - JACKET & TROUSERS Modern design with slim fit and advanced stretch material for excellent comfort. Strong reinforcement material is used on critical areas to provide added protection. Two-way ventilation zippers for comfort. Reflective and high-viz orange fabrics. Trousers feature saw protection and are certified to EN 381-5, EN340 class 1, 20 m/s, fully compliant with AS/NZS 4453:1997. Jacket and trousers available in S, M, L, XL, XXL sizes. (refer page 12)
PROTECTIVE BOOTS - TECHNICALHighly comfortable protective boot made with composite toe cap which keeps the boot low in weight. Made of nylon mesh and high quality leather Sympatex® membrane material that makes the boot comfortable all day and 100% waterproof. The Gravity® sole is oil resistant and gives it perfect grip. The front part of the boot is reinforced with extra rubber protection. Available in a range of sizes from 3 - 12.
5753547-XX Protective Boots - Technical (refer page 15)
EYELET - FOR CHAINSAW HANDLEEyelet with unique design and overload release, made for arborists who use a standard chainsaw. The loop is attached to the grip of the saw, which can then be connected to a strop or directly to the chainsaw hook.
5780771-01 Eyelet
METAL CHAINSAW HOOKThe robust auto-lock hook is easily attached to any harness with removable belt. Designed for easy connection of chainsaw to a belt.
5774379-01 Metal Chainsaw Hook
CHAINSAW STROPTo be used together with a chainsaw hook for connecting the chainsaw to a belt or harness. The elastic design provides a soft stop in the event of the chainsaw being dropped at height, minimising impact on the saw and operator. Measures 0.5m when relaxed and 1.25m fully stretched out.
5774380-01 Chainsaw Strop
CHAINSAW HOOK - PETZLDesigned for easy connection to a belt, the hook slips through the waistbelt slots or along the harness webbing and stays in place, due to a stabilizing clip.
5808003-01 Chainsaw Hook - Petzl
SAW CHAIN H37Specifically designed for arborist use, the H37 chain is characterised by lightweight and improved bore cut abilities. It also has a low kick-back feature for improved safety. 3/8” Mini pitch, 1.3mm gauge. Suits model T540XP chainsaw.
5769365-45 Suits 12” bar - 45 drive links
5769365-52 Suits 14” bar - 52 drive links
ARBORIST HELMET, TECHNICALLightweight and ventilated helmet for professional arborists, approved for work at heights. Has a unique harness adjustment with two wheels that centres the head in the helmet for best balance and stability. Not approved for forestry work on the ground. Certified to EN12492, ANSI Z89.1-2009 Class C.
5780923-01 Arborist Helmet, Technical
TECHNICAL GLOVE, SAW PROTECTIONTechnical glove with saw protection and goat leather palm. Meets requirements of EN 381-7, Class 1, 20m/s and EN 388 mechanical hazards CAT II. Available in sizes 8-10.
5793810-XX Technical glove, saw protection (refer page 13)
AXES - FIBRE-REINFORCED POLYAMID SHAFTHigh quality axes with fibre-reinforced polyamid shaft for maximum durability. Designed with the balance point close to the axe head for perfect balance and weight distribution. The axe head features a non-stick coating for easy entry into the wood and reduced friction. The soft grip and hooked end of the handle prevents slipping for secure handling.
HEAD WEIGHT TOTAL WEIGHT HANDLE LENGTH
5807610-01 Universal Hatchet H900 700g 900g 34cm
5807611-01 Universal Axe A1400 1000g 1400g 60cm
5807612-01 Universal Axe A2400 1800g 2400g 70cm
5807613-01 Splitting Axe S1600 1200g 1600g 60cm
5807614-01 Splitting Axe S2800 2300g 2800g 70cm
AXES - HICKORY SHAFTHigh quality Swedish steel blade and hickory shaft, with leather edge guard.
TOTAL WEIGHT LENGTH
5769264-01 Hatchet 0.5 37.5cm
5769262-01 Limbing Axe 0.85 65cm
5769268-01 Small Splitting Axe 0.9 50cm
5769267-01 Splitting Axe 1.5 75cm
5769266-01 Sledge Axe 2.5 80cm
5769267-02 Rep. Handle – Splitting Axe 75cm
5769266-02 Repl. Handle - Sledge Axe 80cm
SHAFT PROTECTIONThe stainless steel shaft protection with rivec connection, provides additional protection of the handle for longer life.
ERGONOMIC HANDLEModified glass-fiber reinforced PA ensures high impact power because of the lightweight and robust handle material - effective impact energy can be concentrated with the highest impact in the heavy axe head. The handle features soft components that provide a non-slip grip, comfortable touch/feel and perfect ergonomics. The hooked end of the handle prevents the axe from slipping out of the hand.
HAMMER FUNCTIONExtra wide and durable milled backside of the axe head can be used effectively for hammering a wedge. The special milled area preserves wedges and chopping block. For use with plastic, wood and aluminium wedges only (no steel).
BLADE GEOMETRYThe blade geometry design ensures easy entry in the wood and best splitting effect due to the hollow grinding of the blade. Optimal angle geometry for optional splitting performance (adapted to the application).
BALANCE POINT CLOSE TO THE AXE HEADThe balance point close to the axe head enables high splitting power, because the maximal impact effect is concentrated in the heavy axe head. This ensures excellent weight distribution.
FOREST TOOLS & ACCESSORIES
FOREST TOOLS & ACCESSORIES | 76 | CHAIN & BAR MAINTENANCE EQUIPMENT
CHAIN & BAR MAINTENANCE EQUIPMENTINTENSIVE-CUT FILESHigh quality, round, Husqvarna saw chain files made in Germany. New upgraded design for up to 20% improved cutting performance and longer life.
5100957-01 4.0mm(5/32) - 6 x 2pk
5100957-02 4.0mm(5/32) - 12pk
5772337-01 4.5mm - 6 x 2pk
5100955-01 4.8mm(3/16) - 6 x 2pk
5100955-02 4.8mm(3/16) - 12pk
5100956-01 5.5mm(7/32) - 6 x 2pk
5100956-02 5.5mm(7/32) - 12pk
FLAT FILESHigh quality, flat, Husqvarna saw chain files made in Germany. Single cut for precision filing.
5056981-60 Flat File - 6”
5056981-80 Flat File - 8”
COMBINATION FILE GUIDE The combination file guide helps ensure the correct filing angle and simplifies the filing process.
5806874-01 Combination File Guide & Depth Gauge 1/4” (H00)
5056981-08 Combination File Guide & Depth Gauge .325” Pixel (H30)
5056981-09 Combination File Guide & Depth Gauge .325” (H21/22/23/25/26/28)
5052435-01 Combination File Guide & Depth Gauge 3/8” Chisel H42X/45X/46X/47X/48X/50X)
5759915-01 Combination File Guide & Depth Gauge 3/8” Semi Chisel (H51/52/54/58)
HUSQVARNA FILING KITS The file kits contain a file handle, combination gauge - or a file gauge and depth gauge - two round files and one flat file.
5806875-01 1/4” (H00)
5056981-25 325” (H21/22/23/25/26/28)
5056981-27 325” Pixel (H30)
5056981-30 3/8” (H42X/45X/46X/47X/48X/50X)
5796536-01 3/8” LP (H37)
5056981-38 3/8” LP (H35, H36)
5056981-92 404” (H56S/57/64/64S/65/66)
CHAIN MAINTENANCE ACCESSORIESPrecision Filing Guide: Professional model filing guide can be used with 6” - 8” round files as well as flat files.
Stump Vise: For professional and hobby users. Holds the guide bar firmly when filing.
5776157-20 Precision Filing Guide (FLO020)
CARRY CASE Sturdy, stackable design with moulded compartments to hold accessories. Comes standard with 18”-20” guide bar cover. Fits up to model 576XP.
5026749-01 Carry Case (HCCASE)
FOREST BAG Strong and durable bag with a hard and stable bottom. Equipped with side pockets, grip handles on sides, carrying straps and a removable shoulder strap.
5768595-01 Forest Bag
MEASURING TAPE & ACCESSORIESSimple, lightweight design that can be adjusted without tools. Marked on both sides of tape. Contact customer service for full spare parts list.
5056973-15 15M Loggers Tape with release hook
5056973-01 15M Spare Tape
5056973-04 15M Spare Tape - Scissor Hook
5056973-20 20M Loggers Tape with release hook
5056971-05 20M Spare Tape
5056972-10 Release Hook
LIFTING HOOKS & TONGS Lifting hook features comfortable handle and a scale for measuring tip diameter. Tongs are made of high quality steel with ergonomic handle.
5743874-01 Lifting Hook
5743875-01 Lifting Tongs small (20cm)
5743876-01 Timber Tongs (30cm)
STARTER CORD
5310038-75 Starter Cord (100m x 3.0mm)
5310038-76 Starter Cord (100m x 3.5mm)
5310038-77 Starter Cord (100m x 4.0mm)
5310038-78 Starter Cord (100m x 4.5mm)
COMBI-TOOLS High quality steel combination spanners with two sizes of socket on each tool.
5016917-01 13mm x 19mm
5031396-01 13mm x 19mm (Long Shaft)
WEDGES Professional range of high quality felling and splitting wedges. Choice of tough polyamide, magnesium or steel.
5056947-02 5” Polyamide Wedge - 14cm
5056947-00* 5” Magnesium Wedge - 12cm (TLO012)
5784568-01* 7” Straight Splitting Wedge
5772592-01 7” Curved Splitting Wedge
5868859-01* 7” Aluminium Wedge - 500 gm
5056947-03 8” Polyamide Wedge - 20cm
5056947-04 10” Polyamide Wedge - 25cm
5868859-02* 10” Aluminium Wedge - 25cm, 1000gm
6082010-02 12” Polyamide Wedge * ONLY available in AU
CHAINSAW MITTLeather Chainsaw Mitt for New Zealand Forestry workers.5045345-01# Chainsaw Mitt - Leather
#ONLY available in NZ
GUIDE BAR COVERS Made of tough, impact-resistant plastic for maximum protection.
5018344-09 13-16”
5018344-11 18-22”
5018345-04 24-28”
5370722-01 30-42”
TELESCOPIC POLE SHAFT Easy adjustable length from 2.5m to 5.0m. Made of fibre-glass so it’s safe to use around electrical installations. Use with Pruning Saw (5056945-46) .
5024273-01 Telescopic Pole Shaft (2.5m - 5.0m)
5024256-03 Locking Sleeve (31mm - 35mm)
5024252-05 Locking Sleeve (27mm - 31mm)
5024253-03 Wing Nut
PRUNING SAW WITH BARK BLADE For use with telescopic shaft. Curved blade with hook at tip and blade for cutting bark to prevent splitting. For use with telescopic pole shaft (5024273-01)
5056945-66 Pruning Saw with Bark Blade 33.3cm
CLEARING SAW ACCESSORIES Filing equipment to maintain Clearing Saw blades in optimal cutting condition.
5056981-20 File Gauge - Clearing Saws
FILING CLAMP (STUMP VISE) This portable filing clamp digs into any wood surface to secure your bar and sharpen your chain much easier.
5056652-56 Husqvarna Stump Vise
5776168-30 Husqvarna Stump Vise (TLO030)
FILE HANDLE Patented file locking system that can hold round or flat files. Shows 25° and 30° angles to ensure correct filing.
5056978-01 File handle (Ctn 20)
DEPTH GAUGES Get maximum performance from your chain when the depth gauges are filed to the correct height. Each depth gauge tool has settings for hard or soft wood.
5056981-00 .325”
5056981-03 3/8” Low Profile
5056981-01 3/8” Standard
5056981-02 .404”
FILE GUIDES Specially designed file guides that give the filing angles, use together with our round files.
5806874-01 File Gauge 1/4” (H00)
5056981-10 File Gauge .325” (H21/22/23/25/26/28)
5052437-01 File Gauge 3/8” LP (H35,H36,H37)
5795588-01 File Gauge 3/8” LP (H38)
5056981-15 File Gauge .404” (H56S/57/64/64S/65/66)
HANDSAWSDesigned with hard chrome plated blade for high corrosion protection and abrasion resistance. The ergonomic handle features soft components for a better grip.
967 23 64-01 Foldable Handsaw 200mm HVA200FO
967 23 65-01 Fixed Straight Handsaw 300mm HVA300ST
967 23 66-01 Fixed Curved Handsaw 300mm HVA300CU
GREY TROLLEY BAGStrong and durable bag with a hard and stable bottom. Equipped with wheels, retractable towing handle, side pockets, grip handles on sides, carrying straps and a removable shoulder strap.
5768590-01 Grey Trolley Bag
CHAINSAW BAGEspecially made for your chainsaw. Extra pockets for the chainsaw files and a Velcro fastening pocket placed on the outside.
5768591-01 Chainsaw Bag
BREAKING BARS Fully forged with plastic handle, repeat heel and turning hook.
5056943-01 Breaking Bar – 76cm
5743872-01 Impact Bar (Long) 130cm
5049816-92# Telescopic Breaking Bar # ONLY available in NZ
NEW!
HARNESSESLUBRICANTS & FUEL CONTAINERSHARNESSES | 98 | LUBRICANTS & FUEL CONTAINERS
VEGOIL Vegetable based chain oil which is biodegradable and economical. Can be cleaned with common detergents.
5440451-01 1 Litre (Ctn 12)
5310075-20 5 Litre
2-STROKE OIL HPFormulated to work well with mixed fuel blends. Produces lower engine temperature and extends the engine life.
5440158-09 1 Litre dosage (Ctn 12)
5440158-10 4 Litre (Ctn 4)
2-STROKE OIL LS+Handles high loads during tough professional usage. Produces lower engine temperature and extends the engine life.
5781803-02 0.1 Litre
5780370-02 1 Litre
5780371-02 4 Litre
5781800-02 10 Litre
4-STROKE OIL (HUSQVARNA 10W/30) Husqvarna SAE10W/30 4-Stroke Engine Oil is a premium, multi-grade engine oil and has been specially compounded and approved for use with Husqvarna Endurance Series engines, and other 4-Stroke, air-cooled engines. Specification: SAE 10W30 - API SM (Petrol), API CF-4 (Diesel).
5310092-71 10W/40 4-Stroke Oil 0.08L (Ctn 50)
5769019-01 10W/30 4-Stroke Oil 1 Litre (Ctn 12)
5769019-02 10W/30 4-Stroke Oil 4 Litre (Ctn 4)
5769019-03 10W/30 4-Stroke Oil 20 Litre
AIR FILTER OILS Effectively traps particles in the filter, keeping the engine cleaner and reducing wear.
5555000-81 HD Foam Filter Oil 250ml
5027189-01 Air Filter Spray - Motorex 655 (Ctn 12) 476gm/750ml
5047053-01 Air Filter Spray - Motorex 655 (Ctn 4) 476gm/750 ml
GREASE AND SHARPENING PASTEA range of premium quality greases for bevel gear and drive shaft lubrication. Sharpening paste aids in sharpening mower and edger blades.
5036212-01 Grease Sachet 40g
5039764-01 Eco.Bevel Gear Grease 100g
GREASE GUN High quality plastic grease guns for lubricating bar tip bearing and clutch needle bearings.
5047002-01 Grease Gun
MINERAL CHAIN OILMineral chain oil with adhesive agent for high-performance chainsaws. Made from a premium blend of base stocks and tackifier additives which reduces high speed throw off. Extends bar, chain and sprocket life.
5793960-01 1 Litre5793961-01 5 Litre5793962-01 20 Litre
Adjustable backplate in 3 positions clockwise.
Adjustable backplate in 3 positions up and down.
Adjustable belt in front - two positions.
BALANCE XT™ HARNESSThe Balance XT™ Harness features wide, padded, body-hugging straps that make the harness comfortable to wear and reduce stress on the upper body and shoulders. The simple adjustment in the front can be used in two different positions, ensuring maximum comfort for both men and women. A wide and padded hip belt helps to reduce strain on the hips , while the floating pad system reduces strain on the back. The effective quick release mechanism makes it easy to release the product and makes work safer.
5784498-01 Harness - Balance™ XT
BALANCE X™ HARNESS Easy to adjust for best fit, the Balance X™ Harness features a comfortable chest plate and hip belt that ensures the harness distributes the load evenly across a large area for added comfort. The floating pad system reduces the risk of back strain. The harness has a ventilated back plate and wide shoulder pads, providing even weight distribution between both shoulders and also between the hips and shoulders. The shock absorbing hip pad can be adjusted for grass or forest position and has a travel connection. The quick release easily removes the product from the harness.
5784497-01 Harness - Balance X™
STANDARD HARNESS Designed for use with lighter brush cutters and trimmers. Features adjustable, padded shoulder straps for individual comfort. Simple and effective quick release on chest makes it easy to release the product.
5372163-01 Standard Harness
DUO BALANCE™ HARNESS An ergonomic harness that distributes the load optimally between shoulders, chest and back. Wide padded straps and back plate reduce the load on the upper body. Equipped with shock absorbing hip pad that has a travelling connection so that the machine can be manoeuvred easily with minimal impact on the body, further saving the user’s back.
5372757-01 Harness - Duo Balance™ 55
BALANCE FLEX™ HARNESS (FOR POLE PRODUCTS)To be used with all kinds of pole products. The product is attached to the harness by open hooks, making it easy to use and quick to start/stop. The Balance Flex™ Harness evens the load distribution over both shoulders due to the padded shoulder straps, which acts as a support when using the product in different angles and heights.
A lifting force is used to help hold and lift the product. The harness gives good support when using pole products for different kinds of work, high or low, far away or close, which results in better ergonomics.
5784499-01 Harness - Balance Flex™
SHOULDER STRAP Simple shoulder strap for smaller trimmers. Easy to remove the harness with one hand if needed.
5372162-01 Shoulder Strap
NEW! NEW!
HUSQVARNA COMBI CANRedesigned Combi Can to achieve an optimized fuel and chain oil ratio (5.0 / 2.5 litres), also includes an integrated tool box. Approved in accordance with UN recommendations.
5807542-01 CombiCan 5 + 2.5L
5861104-0 Fuel Spout for CombiCan 5 + 2.5L
5861105-01 Oil Spout for CombiCan 5 + 2.5L
5861107-01 Winter Oil Spout for CombiCan 5 + 2.5L
HUSQVARNA FUEL CAN 15L15 litre fuel can for wheeled machines features three uniquely placed, ergonomic grips and a special spout design. Easy to lift, carry and refuel without any splash or waste.
5807545-01 Fuel Can 15L
5861106-01 Fuel Spout for Fuel Can 15L
FUEL CAN - 5 LITRES Husqvarna metal fuel can with pouring spout.
5026762-01* 5 Litre Fuel Can (Ctn 6) * AUE only
BLOWER ACCESSORIES | 11
TRIMMER & BRUSHCUTTER ACCESSORIES10 | TRIMMER & BRUSHCUTTER ACCESSORIES
GRASS BLADE For dense, coarse grass, but not for woody growth. Grass falls onto the blade for neat rows. Four to eight teeth.
5784442-01 8 Tooth, 255mm Ø, 20mm Arbor
5784440-01 8 Tooth, 255mm Ø, 1” Arbor
5784439-01 4 Tooth, 255mm Ø, 20mm Arbor
5784437-01 4 Tooth, 255mm Ø, 1” Arbor
MULTI BLADE For dense, coarse grass, but not for woody growth.
5784450-01 3 Tooth, 255mm Ø, 20mm Arbor
5784449-01 3 Tooth, 255mm Ø, 1” Arbor
5784448-01 4 Tooth, 275mm Ø, 20mm Arbor
5784447-01 4 Tooth, 275mm Ø, 1” Arbor
5784446-01 3 Tooth, 300mm Ø, 20mm Arbor
5784445-01 3 Tooth, 300mm Ø, 1” Arbor
SAW BLADE - MAXI The original Husqvarna Saw Blade. Robust and reliable.
5784429-01 22 Tooth, 200m, Ø, 20mm Arbor
5089015-01 26 Tooth, 200mm Ø, 20mm Arbor
5784430-01 22 Tooth, 225mm Ø, 20mm Arbor
5784431-01 26 Tooth, 200mm Ø, 1” Arbor
5022684-01 22 Tooth, 255mm Ø, 20mm Arbor
SAW BLADE - SCARLETTSuperior cutting performance, low vibration saw blade.
5784425-01 22 Tooth, 200mm Ø, 1” Arbor
5784426-01 22 Tooth, 200mm Ø, 20mm Arbor
5784428-01 24 Tooth, 225mm Ø, 20mm Arbor
5784427-01 24 Tooth, 225mm Ø, 1” Arbor
SUPPORT CUPS Prevents the blade from digging into ground. Two versions. One rotates with the blade and the other runs on bearings for extended life.
5038901-01 Support Cup (M10), black
5038901-02 Support Cup (M12)
5039018-02 Fixed Support Cup 20mm, grey
5021570-02 Support Cup w/ Bearing (M12)
J-HANDLE Converts loop handled units to blade use.
Kit includes;
• Grass cutting blade• Flange washer• Support cup• Combi blade guard (suitable for line & blade)• “J” handle• Shoulder strap• Combi tool• Saw blade guard kit (200mm)
5370485-01 J-Handle Kit
9527156-16 J-Handle Kit - 125L
5442496-01 J-Handle Kit - Suits 335LS / 535LS
ALLOY TRIMMER HEAD A robust and reliable trimmer head with quick and easy line loading. Suitable for any Husqvarna trimmer line and designed for an optimal line locking. The maintenance is minimised and the low cutting height gives an attractive and tidy result.
5784482-01 Aluminium Fixed Line Head (1pk)
5759901-01 Aluminium Fixed Line Head - Bulk Pack (10pk)
TRIMMER HEAD - MANUALTrimmer head with manual cord feed. The cord is fed manually by the user when pushing the cord feed button and pulling the cord.
5784474-01 Trimmer Head-S35 (M10)
5784476-01 Trimmer Head-S35 (M12)
TRIMMER HEAD - TRIMMY SII M125784478-01 Trimmer Head SII M12 Manual
TRIMMER HEAD – TAP ’N GO™Tap ‘N Go™ heads feature a semi-automatic cord feed system. The trimmer line is fed automatically when the head is pushed into the ground. This means that the user always controls when the line is fed and the line can be fed while working with the machine. The machine does not need to be turned off or released from the harness while feeding is taking place.
9666744-01 Trimmer Head-T25 (3/8” RH, LH, M10)
5784465-01 Trimmer Head-T35-X (M10)
5784466-01 Trimmer Head-T35-X (M12)
5784468-01 Trimmer Head-T45-X (M12)
5784470-01 Trimmer Head-T55-X (M12)
TRIMMER HEAD – AUTOMATIC Cord is fed automatically when it is too short. The cord length is self-adjusting.
5310092-26 Trimmer Head-Auto 55 (M12) 1”
TRIMMER HEAD – TRI-CUTFor coarser grass and terrain with stones. Highly visible, replaceable plastic flails, safe for use around trees and bushes.
5784491-01 Tri-Cut (M10)
5784493-01 Tri-Cut (M12)
5310177-14 Plastic Blade Tri-Cut (255mm) Pkt 6
5310177-15 Plastic Blade-Tri Cut (300mm) Pkt 6
125BVX HANDHELD BLOWER 9527119-18 Gutter Cleaning Kit (3m tube length)
BLOWER ACCESSORIES
SHREDDER BLADE KITContains shredder blade, guard, holder, bracket, support flange and bolts.
5448429-01 Shredder Blade Kit (suits 345FR)
TRIMFORCE™ TRIMMER LINE Commercial grade co-polymer pentagon-shaped orange string trimmer line with great cutting performance, reduced breakage and welding. Fits all standard trimmer heads.
2.0mm Green
6390061-02 2.0mm - .080” 50’ Teardrop
6390061-03 2.0mm - .080” 1/2 lb Donut
6390061-04 2.0mm - .080” 1 lb Donut
2.4mm Orange
6390061-08 2.4mm - .095” 50’ Teardrop
6390061-09 2.4mm - .095” 1/2 lb Donut
6390061-10 2.4mm - .095” 1 lb Donut
6390061-11 2.4mm - .095” 3 lb Spool
2.7mm Yellow
6390061-14 1/2 lb. Donut - .105” 1/2 lb Donut
6390061-15 1 lb. Donut - .105” 1 lb Donut
6390061-16 3 lb. Spool - .105” 3 lb Spool
6390061-17 5 lb. Spool - .105” 5 lb Spool
3.3mm Red
6390061-19 1/2 lb. Donut - .130” 1/2 lb Donut
6390061-20 1 lb. Donut - .130” 1 lb Donut
6390061-21 3 lb. Spool - .130” 3 lb Spool
6390060-22 5 lb. Spool - .130” 5 lb Spool
XP FORCE™ TRIMMER LINE Extreme Commercial Grade dual polymer string trimmer line in a metallic green color that blends with grass. The same dimple shape of our X Force™ Trimmer Line is combined with the cutting edge technology of a strong abrasion resistant outer skin. Fast acceleration and level flight characteristics allow for reduced fuel consumption and makes the line run quieter. Fits all standard string trimmer heads. Lasts 30% longer than traditional trimmer line depending on application.
2.7mm Yellow
5050316-05 1 lb. Donut - .105” 1 lb Donut
5050316-07 3 lb. Spool - .105” 3 lb Spool
3.3mm Red
5050316-09 1 lb. Donut - .130” 1 lb Donut
5050316-08 3 lb. Spool - .130” 3 lb Spool
NEW!
NEW!
12 | BATTERY ACCESSORIES
PROTECTIVE CLOTHING
BATTERY ACCESSORIES
PROTECTIVE CLOTHING | 13
TECHNICAL EXTREME JACKETModern design with slim fit and advanced stretch material for excellent comfort. Strong reinforcement material is used on critical areas, including the unique pre-bent arms, to provide added protection. Two-way ventilation zippers under the arms. Reflective fabric on the arms, reflective band.
5850615-46 Small (92cm - 100cm)
5850615-50 Medium (100cm - 108cm)
5850615-54 Large (108cm - 116cm)
5850615-58 X-Large (116cm - 124cm)
5850615-62 XX-Large (124cm - 128cm)
TECHNICAL EXTREME TROUSERS Trousers with the same slim fit, stretch, and reinforced material as the jacket, plus chainsaw protection. Unique pre-bent knees and ventilation zippers at the backs of the legs. Velcro adjustments around the waist ensures a perfect fit for both men and women.
5781665-46 Small (170cm - 176cm)
5781665-50 Medium (176cm - 182cm)
5781665-54 Large (176cm - 182cm)
5781665-58 X-Large (182cm - 188cm)
5781665-62 XX-Large (188cm - 194cm)
TECHNICAL JACKETFitted jacket with four-way stretch material for ease of movement. Reinforced material for high durability, two-way ventilation zippers for additional comfort. The reflective fabric on the arms, a reflective band and high-viz orange fabric at the top, provides increased visibility.
5781660-46 Small (92cm - 100cm)
5850613-50 Medium (100cm - 108cm)
5850613-54 Large (108cm - 116cm)
5850613-58 X-Large (116cm - 124cm)
5850613-62 XX-Large (124cm - 128cm)
TECHNICAL TROUSERSTrousers with the same tight fit, stretch material, reinforcements, ventilation and reflective material as the jacket, plus chainsaw protection. Unique pre-bent knees and ventilation zippers at the backs of the legs. The extended back design provides added coverage.
5781661-46 Small (170cm - 176cm)
5781661-50 Medium (176cm - 182cm)
5781661-54 Large (176cm - 182cm)
5781661-58 X-Large (182cm - 188cm)
5781661-62 XX-Large (188cm - 194cm)
CLASSIC JACKETBoasts a clean and modern design with quality in the details. The high-viz orange fabric at the top and large reflective logo prints, provides increased visibility. The jacket features buttons at the end of the arms to provide a tight and secure fit, a chest pocket and two side pockets.
5781653-46 Small (92cm - 100cm)
5850607-50 Medium (100cm - 108cm)
5850607-54 Large (108cm - 116cm)
5781653-58 X-Large (116cm - 124cm)
5781653-62 XX-Large (124cm - 128cm)
CLASSIC TROUSERSClean, modern design trousers with chainsaw protection. The classic trousers feature a comfortable, elastic waist design with front pockets, one back pocket and a convenient ventilation zipper at the back of the legs for user comfort.
5781654-46 Small (170cm - 176cm)
5781654-50 Medium (176cm - 182cm)
5781654-54 Large (176cm - 182cm)
5781654-58 X-Large (182cm - 188cm)
5781654-62 XX-Large (188cm - 194cm)
TECHNICAL GLOVES WITH SAW PROTECTIONA Technical glove with chainsaw protection 20m/s. Goat leather palm with interlock jersey and grey foam and laminated spandex fabric on back. Made with comfortable seams that follow the hand shape and with double thumb stitching. Meets the requirements of EN 381-7, Class 1, 20 m/s and EN 388 mechanical hazards CAT II.
5793810-08 Size 8
5793810-09 Size 9
5793810-10 Size 10
FUNCTIONAL GLOVES WITH SAW PROTECTION A comfortable saw protection glove made with a goat leather double palm with foam laminated spandex on the back and with nylon neoprene knuckles. Goat leather has a good protection against moisture since it contains natural fat and is therefore suitable for demanding jobs. Knitted wrist makes it easy to put on and gives a soft comfort. Meets requirements of EN 381-7, Class 0, 16 m/s and EN 388 mechanical hazards CATII.
5793802-07 Size 7
5793802-08 Size 8
5793802-09 Size 9
5793802-10 Size 10
5793802-12 Size 12
GLOVES - CLASSIC LIGHT A slim fit and comfortable glove made with a goat leather palm with jersey fabric on the back. Goat leather has a good protection against moisture since it contains natural fat and is therefore suitable for demanding jobs.
5793800-06 Size 6
5793800-08 Size 8
5793800-09 Size 9
5793800-10 Size 10
HUSQVARNA PRO CHAPS New style Husqvarna Pro Chainsaw Chaps feature a lightweight, breathable poly-cotton outer shell material with fully adjustable clip style leg straps and a velcro-attached fabric layer on the rear lower leg to offer debris and snagging protection. Fully certified to AS/NZS 4453:1997
5769241-46 Small
5769241-50 Medium
5769241-54 Large
LIFESTYLE CHAPSChainsaw chaps for the occasional chainsaw user. They feature heavy duty nylon outer fabric, with adjustable clips on the upper leg and zip closure on the lower leg to ensure a secure fit. Certified to AS/NZS 4453-3:1997.
LENGTH (WAIST TO BOTTOM OF CHAP)
5292841-01 Small 90cm
5292842-01 Medium 95cm
5292843-01 Large 100cm
FIRE RETARDANT CHAPSSuitable for Government, Utility and Emergency Services chainsaw users, Husqvarna’s Fire-retardant Chainsaw Chaps offer increased protection from thermal and electrical hazards, and comply with Australian and New Zealand occupational health standards.
5748419-03 Small
5748419-02 Medium
5748419-01 Large
BRACES Extra wide, adjustable length braces.
5056185-00 Braces with Metallic Clips
5056185-10 Replacement braces for Technical Extreme Trousers. Also suits Technical and Classic Trouser range.
REPLACEMENT BUCKLES FOR PRO CHAPS
5806080-01 20mm Male
5806081-01 20mm Female
5806078-01 50mm Male
5806079-01 50mm Female
CLASSIC GLOVES A one size durable glove made with a goat leather palm and spandex fabric on the back. Goat leather offers good protection against moisture since it contains natural fat and is therefore suitable for demanding jobs. Rubberised cuff with cotton binding for a perfect fit around the wrist.
5793799-10 Size 10
HUSQVARNA BATTERY BAGInsulating, splash water-proof and shock-absorbing bag for Husqvarna BLi batteries (BLi 80/150). Features a thermo coating which keeps the appropriate operating temperature of the battery even under very cold or hot climate conditions. Easy to carry with both belt-loop or hook for arborists.
5853718-01 Battery Bag Suits BLi80 & BLI150 batteries
HUSQVARNA BATTERY BOX-SMALLBox for the safe transport and storage of Husqvarna batteries, chargers and other accessories. Fully compatible with the Systainer-Box-System
5854287-01 Battery Box-S (160x300x400mm) Suits BLi80 & BLi150 batteries.
HUSQVARNA BATTERY BOX-LARGEBox for safe transport and storage of Husqvarna backpack batteries, batteries, chargers and other accessories. The box is compatible with the Systainer-Box-System.
5854288-01 Battery Box-L (210x500x300mm) Suits BLi80, BLi150, BLi520X & BLI940X batteries.
NEW! NEW! NEW!
SAFETY FOOTWEARSAFETY HELMETS, HEARING & EYE PROTECTIONSAFETY FOOTWEAR | 1514 | SAFETY HELMETS, HEARING & EYE PROTECTION
PROTECTIVE BOOTS- FUNCTIONAL 24 Features a reinforced toe-cap, ankle protection and approved saw protection. The non-slip sole is prepared for studs, while the ridge on the heel makes it easier to remove boot. Weight 2.5kg/pair. Meets requirements of EN 345 SB E, EN 381-3 class 2, 24 m/s.
PROTECTIVE BOOTS - TECHNICAL Highly comfortable protective boot made with composite toe cap which keeps the boot low in weight. Made of nylon mesh and high quality leather Sympatex® membrane material that makes the boot comfortable all day and 100% waterproof.
The Gravity® sole is oil resistant and gives it perfect grip. These boots are suitable for forest and garden work as well as leisure, in all weather conditions. The front part of the boot is reinforced with extra rubber protection. Certified to EN ISO 20345. Weight 1.5kg pair.
AUTOMOWER® HOUSEProtects the charging station and Automower® from the exposure of sun and rain.
5850194-01 Automower® House
WHEEL BRUSH KITKeeps the driving wheels clean to maintain good traction. Kit includes: 6 x brushes, 2 x holders and 2 x screws.
5051327-01 Wheel Brush Kit
SIGNAL BOOSTERIncreases the signal strength to a sufficient level in long loop wire installations.
5224258-01 Signal Booster
PREMIUM EARMUFF Design allows 20% adjustment of pressure. Lightweight, flexible padded headband. Meets requirements of EN 352-1.
5056653-04 Premium Earmuff w. Headband - old
5056653-25 Premium Earmuff (Pair) - suits Helmet Type 1 - Arborist
5790356-01 Premium Earmuff with adaptor - suits Helmet Type 2 - Forest
PREMIUM EARMUFF WITH PERSPEX OR MESH VISOR Protection for grass clearing and other tasks. Cover between visor and headband which prevents grass, chips and rain from entering from above. Complete as shown. Can also be fitted with a sun peak. Meets requirements of EN 352-1, EN 166 and EN 1731.
5056653-48 Premium Earmuff w. Plexi Visor
5056653-58 Premium Earmuff w. Mesh Visor
5056653-80 Visor Holder (Premium Earmuff)
5056653-42 Visor Clips-L+R (Premium Earmuff)
5056653-81 Protection Cap (Premium Earmuff) w. adaptor for Helmet Type 2
FM RADIO EARMUFF WITH AUX JACK NEW hearing protection with FM radio. The headband design centralises the pressure on the headband, reducing the pressure on the ears. It has improved attenuation and sound quality. The ear muffs are individually designed for the left and right ear, meaning that they follow the shape of the head, giving a perfect fit for all users. Features Audio input 3.5mm (AUX) for mp3 or communication radio. Noise reduction - SNR - 27dB(A). Meets requirements of EN352-3:2002, EN352-6:2002 and EN352-8:2008.
5782749-01 FM Radio Earmuff
5784023-01 Hygiene Kit for FM Radio Earmuff
‘X’ SERIES PROTECTIVE GLASSES Protective glasses with scratch resistant lenses. Frames can be extended and lenses can be angled. Available in Clear, Grey tint, and Yellow tint. Meets requirements of EN 166, ANSI Z87+
5449637-01 Protective Glasses - Clear ‘X’
5449637-02 Protective Glasses - Yellow ‘X’
5449637-03 Protective Glasses - Sun ‘X’
PRO SAFETY GOGGLES WITH ANTI-FOG LENS Developed for people who wear eyeglasses. Featuring non-scratch anti-fog lenses and soft inside for greater comfort. Meets requirements of EN 166.
5449639-01 Pro Safety Goggles (Anti-Fog Lens)
ARBORIST HELMET KITLightweight and ventilated helmet for professional arborists, approved for work at heights. Unique harness adjustment with two wheels that centers the head in the helmet for best balance and stability on the head. Only for work at height - Not approved for forestry work on the ground! Certified to EN12492, ANSI Z89.1-2009 Class C.
5780923-01 Aborist Helmet Kit (incl. Helmet, Earmuff, Mesh Visor)
FOREST HELMET KIT Polycarbonate helmet, made in Australia, and supplied with hearing protection, sun peak and neck guard. Also includes UltraVision visor - which offers a 20% light reduction giving a clearer view. Certified to AS/NZS 1801:1997,Type 2
5792440-01 Helmet Assembly (Helmet, Earmuff & Mesh Visor)
5802544-01 Helmet Assembly (6pk)
5792441-01 Polycarbonate Helmet only
EARMUFF AND HELMET SPARES
5746135-01 Ultra Vision Visor (NEW)
5056653-21 Mesh Visor-Aluminium
5056653-19 Mesh Visor-Nylon
5056653-43 Visor-Perspex
5056653-28 Visor Holder Assembly - Helmet
5056653-26 Hygiene Kit - Earmuff
5056653-91 Hygiene Kit - FM Earmuff (old model)
5056653-31 Sweatpad - Earmuff
5755576-02 Helmet Harness - Plastic Type 1 Helmet
5792442-01 6 point Terylene Harness for Type 2 Helmet
5056653-06 Neck Protector - Helmet
5781798-01 Sun Peak For Helmet Complete
5755573-01 Sweat Band - Type 1 Helmet
5792443-01 Replacement Sweat Band - Type 2 Helmet
5056653-95 Chin Strap - 11154 (Type 1 Helmet)
5854834-01 Chin Strap (Type 2 Helmet)
GARDEN EARMUFF Extra wide headband for secure, comfortable fit and less pressure on the head. The protectors are made of impact- resistant ABS plastic. Meets requirements of EN 352-1 and EN 166. Weight 218g.
5101995-01 Garden Earmuff
5056990-12 Garden Earmuff (Ctn 10)
GARDEN EARMUFF WITH PERSPEX OR MESH VISOR Garden earmuff complete with visor holder and perspex or mesh visor. Meets requirements of EN 352-1 and EN 166.
5056653-60 Garden Earmuff w. Perspex Visor
5056653-61 Garden Earmuff w. Mesh Visor
EU sizeUK / US size
5753547-36 UK 3.5 / US 4.5 36
5753547-37 UK 4 / US 5 37
5753547-38 UK 5 / US 6 38
5753547-39 UK 5.5 / US 6.5 39
5753547-40 UK 6.5 / US 7.5 40
5753547-41 UK 7.5 / US 8.5 41
5753547-42 UK 8 / US 9 42
5753547-43 UK 9 / US 10 43
5753547-44 UK 9.5 / US 10.5 44
5753547-45 UK 10.5 / US 11.5 45
5753547-46 UK 11 / US 12 46
5753547-47 UK 12 / US 13 47
BOOT STUDSStuds, including stud key, to suit protective boots. Functional 24.
5872581-01 Boot Studs, including stud key (50 pcs / package)
5739558-37 Size 4 37
5739558-38 Size 5 38
5739558-39 Size 5 1/2 39
5739558-40 Size 6 1/2 40
5739558-41 Size 7 1/2 41
5739558-42 Size 8 42
5739558-43 Size 9 43
5739558-44 Size 9 1/2 44
5739558-45 Size 10 1/2 4
5739558-46 Size 11 4
5739558-47 Size 12 47
EU size
AUTOMOWER® ACCESSORIES
SOFT CARRY BAGA special carry bag, making it easy to transport the Automower® between lawns.
5056999-91 Soft Carry Bag
WHEELED ACCESSORIES | 1716 | WHEELED ACCESSORIES
WHEELED ACCESSORIES
HYDRAULIC KITKit necessary for adaption of front-mounted attachments with hydraulic function.
9667545-01 Hydraulic Kit - P525D
FLAIL MOWERRobust, reliable flail mower for rough areas with overgrown grass and low brushwood. Hard-wearing mitre gear for maximum product life. Suits models R422TSAWD, P524.
9667965-01 Flail Mower - Cutting width 100cm.
BRUSHRotating brush attachment for professional Riders. Adjustable support wheels. Suits models R422TSAWD, P524.
9667963-01 Working width 114-120cm.
UTILITY BUCKETPractical utility bucket in welded high-tensile steel. Hydraulic adjustment of angling and emptying. Requires hydraulic kit and counter weight.
9659974-01 Utility Bucket - P525D
COUNTER WEIGHTRear counterweight, must be used when operating front-mounted attachments. Total weight 62kg. Suits model P525D.
9667549-01 Counter weight
FLAIL MOWERProductive and robust flail mower for rough areas with overgrown grass and brushwood. Shaft driven with bevel gear. Requires counter weight. Suits model P525D.
9670243-01 Flail mower - P525D
SWEEPER/COLLECTORFor Riders. A spacious, handy collector that is easily emptied from the driver’s seat. Adjustable height setting. Working width 42”/107cm.
5866365-01 Sweeper/Collector
AERATOREfficient tow-behind aerator. Productivity 2.9 acres/hr. Weight units sold separately. Suits models R422TSAWD.
5400000-73 Aerator - 36” Width
9689992-36 Aerator - 48” Width
BRUSHRotating brush attachment for model P525D. Shaft driven with bevel gear and chain drive. Two rear solid support wheels for ground following. Requires hydraulic kit. Suits model P525D.
9667544-01 Working Width 121.5 - 130cm
SPREADERTow-behind spreaders with various spreading widths (Spreader 30 =1.8M - 3.0 M ; Spreader 75 = 3.0m - 3.7M ) and various weight capacities.
954 12 00-46 Spreader 30
967 02 72-01 Spreader 75
COVER Full size covers made in water resistant nylon.
5056308-70 Rider Cover (S) - Suits 100 series
5049813-82 Rider Cover (L) - Suits 400 series
5056308-82 Tractor Cover (L) - Suits YT/GT/CT
BIOCLIP® / MULCHING KITConverts standard cutting deck to BioClip® (mulching). Suits selected lawn tractors and zero turns.
Ask instore for fit up options & ordering details
COMBI CARTUse as either a wheelbarrow or a tow-behind trailer.
5872799-01 Combi Cart
TRACTOR SCOOPConvenient scoop recommended for transporting small / lightweight items, such as bark or leaves.
5762173-01 Tractor Scoop - YT/GT models
TRACTOR BLADEEfficient 48” blade recommended for clearing gravel and debris from paths.
5762174-01 Tractor Blade - GT models only.
DEFLECTORConverts integrated collection tractor models to rear ejection function.
9607100-40 Deflector - CTH2642TRE
9607100-42 Deflector - CTH2138R/CTH2642TR
9541200-91 Deflector - TC328 / TC342
COLLECTORSA range of spacious collectors available, with two or three bin compartments. Capacity - 210 L or 315 L.
Ask instore for fit up options and ordering details.
BATTERY CHARGER BC0.8For all 12V lead-acid batteries from 1.2 - 32Ah. Suitable for maintenance charging up to 100Ah. Fully automatic and maximises battery life and performance. No sparks, short-circuit proof and reverse-polarity protected for untroubled usage.
5794501-02 Battery Charger
BATTERY STATUS INDICATORA practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery. Fits Husqvarna Battery charger XS 800 (new connection) and BC 0.8
5794521-01 Battery status indicator
SEAT COVERWater resistant fabric, cushioned for extra comfort, with rear storage pockets for tools and gear. Protects the seat against weather and UV damage. Suits all homeowner/landowner ride-on mowers.
5313082-28 Seat Cover
FLAIL MOWERRobust, reliable flail mower for rough areas with overgrown grass and low brushwood. Suits model R322TAWD.
9664161-01 Flail Mower - Cutting width 90cm
BRUSHRotating brush for sweeping up leaves, snow, and debris. Can be angled to either side. Suits model R322TAWD.
9670086-01 Working width 90 - 95cm
LOADING RAMPSCurved loading ramps made of sea water resistant aluminium with slip resistant surface for a secure grip. Well suited for use on trailers with a height up to 700 mm, and for a maximum total load of 450 kg/pair.
5056990-43 Loading Ramps - sold in pairs
ROPS SYSTEMROPS to reduce the risk of accidents in case the mower should roll. Mounted directly to the chassis. Safety belt included. Suits selected Zero Turns and P525D. Ask in store for fit up options and ordering details.
ROAD KITComplete road kit designed for safe transport on public roads to and from work sites. Kit includes control box, rotating beacon light, position and touring lights (front and rear) and number plate light kit.
5853187-01 Road Kit - P525D
TECHNICAL SPECIFICATIONS GLOSSARYTECHNICAL SPECIFICATIONS GLOSSARY | 1918 | TECHNICAL SPECIFICATIONS GLOSSARY
HUSQVARNA – SAW CHAIN
PITCH GAUGEHUSQVARNA
CHAIN PART NO.
MODEL NO.
COMMERCIAL REF. NO.
SIZECUTTER
TYPE
OTHER CHAIN TYPESFILE SIZE
OREGON WINDSOR CARLTON STIHL
1/4" .050"
5018440-58
H00
H00-58DL 10"Micro-
Chisel®25AP 50K E1MC-BL 13RM 5/32"5018440-64 H00-64DL 12"
5033054-01 H00-100R 100ft
.325" Pixel
.050"
5018406-64
H30X
H30-64DL 15"
Micro-Chisel®
95VPX 50JSG K1NK-BL – 3/16"
5018406-66 H30-66DL 16"
5018406-72 H30-72DL 18"
5033058-01 H30-100R 100ft
5033058-25 H30-25R 25ft
.325"
.050"
5033067-01H22X
H22-100R 100ft Micro-Chisel®
20BPX 50JG K1C-BL 23RMC 3/16"5033067-25 H22-25R 25ft
5033091-01H23X
H23-100R 100ftChisel 20LPX 50JLG K1L-BL 23RS 3/16"
5033091-25 H23-25R 25ft
.058"
5018404-64
H25X
H25-64DL 15"
Micro-Chisel®
21BPX 58JG K2C-BL 25RMC 3/16"
5018404-66 H25-66DL 16"
5018404-72 H25-72DL 18"
5018404-80 H25-80DL 20"
5033055-01 H25-100R 100ft
5033055-25 H25-25R 25ft
5033057-01H21X
H21-100R 100ftChisel 21LPX 58JLG K2L-BL 25RS 3/16"
5033057-25 H21-25R 25ft
.063"
5033003-62
H28X
H28-62DL 16"
Micro-Chisel®
22BPX 63JG K3C-BL 26RMC 3/16"5033003-68 H28-68DL 18"
5033003-22 H28-100R 100ft
5033003-25 H28-25R 25ft
5033073-01H26X
H26-100R 100ftChisel 22LPX 63JLG K3L-BL 26RS 3/16"
5033073-25 H26-25R 25ft
3/8" LP
.043"
581807940
H38
H38-40DL 10”
Chamfer Chisel™
90SG 43RG N4C-BL 61PMM3 4.5mm
581807945 H38-45DL 12”
581807952 H38-52DL 14”
5818079-01 H38-100R 100ft
5818079-25 H38-25R 25ft
.050"
5018470-52
H35X
H35-52DL 14"
Semi Chisel 91VXL 50R N1C 63PM 5/32"5018470-56 H35-56DL 16"
5033069-01 H35-100R 100ft
5033069-25 H35-25R 25ft
5033068-25 H36 H36-25R 25ftChamfer Chisel™
91VG 50RG N1C-BL 63PMC3 5/32”
5769365-45
H37
H37-45DL 12"
Chamfer Chisel™
91PX 50RG N1C-BL 63PMC3 5/32"
5769365-52 H37-52DL 14"
5769365-56 H37-56DL 16"
5769365-01 H37-100R 100ft
5769365-25 H37-25R 25ft
PITCH GAUGEHUSQVARNA
CHAIN PART NO.
MODEL NO.
COMMERCIAL REF. NO.
SIZECUTTER
TYPE
OTHER CHAIN TYPESFILE SIZE
OREGON WINDSOR CARLTON STIHL
3/8"
.050"
5033033-22H51
H51-100R 100ftSemi Chisel 72DP 50AG A1EP-BL 33RM1 7/32"
5033033-25 H51-25R 25ft
5033079-01H47X
H47-100R 100ft
Chisel
72LGX 50APL A1LM 33RS 7/32"5033079-25 H47-25R 25ft
5033078-01H46X
H46-100R 100ft72LPX 50APLG A1LM-BL 33RS1 7/32"
5033078-25 H46-25R 25ft
0.58"
5440788-68
H54
H54-68DL 18"
Semi Chisel 73DP 58AG A2EP-BL 35RM1 7/32"
5440788-72 H54-72DL 20"
5440788-76 H54-76DL 22"
5440788-84 H54-84DL 24"
5033050-01 H54-100R 100ft
5033050-25 H54-25R 25ft
5033081-01H48X
H48-100R 100ft
Chisel 73LGX 58APL A2LM 35RS 7/32"
5033081-25 H48-25R 25ft
5018414-72
H42X
H42-72DL 20"
5018414-76 H42-76DL 22"
5018414-84 H42-84DL 24"
5018414-92 H42-92DL 28"
5033060-01 H42-100R 100ft
5033060-25 H42-25R 25ft
5033052-22 H52 H52-100R 100ftSemi Chisel-
Ripping73RD – A2EP-RP – 7/32"
0.63"
5019824-01H50X
H50-100R 100ftChisel 75LGX 63APL A3LM 36RS 7/32"
5019824-25 H50-25R 25ft
5033088-01 H45X H45-100R 100ft Chisel 75LPX 63APLG A3LM-BL 36RS1 7/32"
5228745-72
H58
H58-72DL 20"
Semi Chisel 75DP 63AG A3EP-BL 36RM1 7/32"5228745-01 H58-100R 100ft
5228745-25 H58-25R 25ft
.404"
.058" 5440760-01 H56S H56S-100R 100ft Chisel-Skip 58J – B2LM-SK – 7/32"
.063"
5033064-01H64
H64-100R 100ft Micro-Chisel®
27 63B B3RM35 46RM 7/32"5033064-25 H64-25R 25ft
5033065-01 H66 H66-100R 100ft Micro-Bit® 59AC 7/32"
5018434-65
H57
H57-65DL 20"
Chisel 59L 63BL B3EP 46RS 7/32”
5018434-76 H57-76DL 24"
5100941-01 H57-84DL 28"
5018434-95 H57-95DL 32”
5018434-04 H57-104DL 36"
5100943-01 H57-122DL 42"
5033077-01 H57-100R 100ft
5033077-25 H57-25R 25ft
5033066-01 H65 H65-100R 100ftSemi Chisel
- Ripping27R 63BR B3RM10 46RCX 7/32"
TECHNICAL SPECIFICATIONS GLOSSARY | 2120 | TECHNICAL SPECIFICATIONS GLOSSARY
TIE STRAPS - PKT 25
PART NO. HUSQVARNA CHAIN TYPE
5040662-01 H00
5018478-05 H35,36,37
5018477-07 H30
5018478-04H42,46,47,48,51,52,54
H45,50,58
5018477-03H21,22,23,25
H26,28
5018479-02 H56S,57,58S,64,64S,65,66
PRESET TIE STRAPS - PKT 25
PART NO. HUSQVARNA CHAIN TYPE
5040670-01 H00
5018481-05 H35,36,37
5018480-08 H30
5018481-04 H42,46,47,48,51,52,54
5040670-03 H45,50,58
5018480-05 H21,22,23,25
5040670-04 H26,28
5018482-02 H56S,57,58S,64,64S,65,66
OREGON CHAIN TYPE
25
91
95
72/73
75
20/21
22
26/27/57/58/59
HUSQVARNA CHAIN PARTS
CHAIN PITCH 1/4” .325” 3/8” LP 3/8” .404”
Drive Links - 25’ Reel 600 464 412 412 372
Drive Links - 100’ Reel 2392 1848 1640 1640 1484
CHAIN REELS – DRIVE LINK COUNT
PITCH GAUGEHUSQVARNA
PART NO.BAR LENGTH
DRIVE LINKS CHAIN TYPEOREGON
EQUIVALENTINCHES CM
Solid Bars with Replaceable Nose
.325" .058"5024400-72 18" 45cm 72 H21,25 188RNBK095
6080000-09 20" 50cm 78 H21,25 208RNBK095
3/8"
.050" 6080000-46 20" 50cm 72 H46,47,51 200RNDD009
.058"
6080000-17 16" 40cm 60 H42,48,54 168RNDK095
5019577-68 18" 45cm 68 H42,48,54 188RNDK095
5019577-72 20" 50cm 72 H42,48,54 208RNDK095
5019569-60 16" 40cm 60 H42,48,54 168RNDD009
5019569-68 18" 45cm 68 H42,48,54 188RNDD009
5019569-72 20" 50cm 72 H42,48,54 208RNDD009
5019569-76 22" 55cm 76 H42,48,54 228RNDD009
5019569-84 24" 60cm 84 H42,48,54 248RNDD009
5019569-92 28" 70cm 92 H42,48,54 288RNDD009
6080000-54 32" 81cm 105 H42,48,54 328RNDD009
.063"
5024396-72 20" 50cm 72 H45,50,58 203RNDD009
6080000-55 32" 81cm 105 H45,50,58 323RNDD009
5024396-15 36" 90cm 115 H45,50,58 363RNDD009
.404" .063"
5020773-65 20" 50cm 65 H57,64 203RNFD009
5020773-76 24" 60cm 76 H57,64 243RNFD009
5020773-84 28" 70cm 84 H57,64 283RNFD009
6080000-62 32" 81cm 95 H57,64 323RNFD009
6080000-63 36" 90cm 104 H57,64 363RNFD009
5020773-22 42" 107cm 122 H57,64 423RNFD009
Laser Tip Solid Nose Bars
.058"
5019580-68 18" 45cm 68 H42,48,54 188ATMD009
5019580-72 20" 50cm 72 H42,48,54 208ATMD009
5019580-84 24" 60cm 84 H42,48,54 248ATMD009
5019580-92 28" 70cm 92 H42,48,54 288ATMD009
.063" 5015896-01 28" 70cm 84 H45,50,58 283ATMD009
HUSQVARNA SOLID GUIDE BARS
PART NO. DESCRIPTION PART NO. DESCRIPTION
RSN Guide Bars – Replaceable Nose Laminated Guide Bars – Sprocket Noses
5019575-01 3/8”-11T 5018510-05 .325” -.050” (10T)
5048897-01 .325"-12T 5018510-01 .325” - .058” (10T)
5019588-01 .404"-10T 5019594-01 .325” - .058” (12T)
– – 5019572-01 .325” - .063” (10T)
– – 5018510-02 3/8” - .058” (10T)
– – 5019574-01 3/8” - .058” (11T)
PITCH GAUGEHUSQVARNA
PART NO.
BAR LENGTHDRIVE LINKS CHAIN TYPE
OREGON EQUIVALENT
INCHES CM
Special Bars (suit PS250) 3/8” .043" 5024052-01 6" 15cm 32 H38 –
Special Bars (suit 327PT5S)
1/4" .050"5758422-58 10” 25cm 58 H00 –
5758422-64 12" 30cm 64 H00 –
Narrow Kerf Laminated Sprocket Nose Bars
3/8” .043"
5019595-40 10” 25cm 40 H38 104MLEA041
5019595-45 12” 30cm 45 H38 124MLEA041
5019595-52 14” 35cm 52 H38 144MLEA041
Consumer Sprocket Nose Bars
3/8” .050"
5019592-40 10” 25cm 40 H35,36 100SDEA095
5019592-45 12" 30cm 45 H35,36 120SDEA095
5019592-52 14" 35cm 52 H35,36 140SDEA095
5019592-56 16" 40cm 56 H35,36 160SDEA095
Consumer Sprocket Nose Side-tensioning Bars
3/8” .050"
5019596-45 12" 30cm 45 H35,36 120SDET095
5019596-52 14" 35cm 52 H35,36 140SDET095
5019596-56 16" 40cm 56 H35,36 160SDET095
TechLite™ Laminated Sprocket Nose Bars
3/8” .050"
5768307-45 12" 30cm 45 H35,37 120SDEA095
5768307-52 14" 35cm 52 H35,37 140SDEA095
5768307-56 16" 40cm 56 H35,37 160SDEA095
Pro-Laminated Sprocket Nose Bars
.325" .058"
5089121-56 13" 33cm 56 H21,25 138SLBK095
5089121-64 15" 38cm 64 H21,25 158SLBK095
5089121-66 16" 40cm 66 H21,25 168SLGK095
5089121-72 18" 45cm 72 H21,25 188SLGK095
5089121-80 20" 50cm 80 H21,25 208SLGK095
3/8" .058"
5089141-56 15" 38cm 56 H42,48,54 158SLHK095
5089141-60 16" 40cm 60 H21,25 168SLHK095
5089141-68 18" 45cm 68 H42,48,54 188SLHK095
5101535-72 20" 50cm 72 H42,48,54 208SLHK095
5089131-56 15" 38cm 56 H42,48,54 158SLHD009
5089131-60 16" 40cm 60 H21,25 168SLHD009
5089131-68 18" 45cm 68 H42,48,54 188SLHD009
5442855-72 20" 50cm 72 H42,48,54 208SLHD009
Narrow Kerf Pro-Laminated Sprocket Nose Bars
.325" .050"
5089261-56 13" 33cm 56 H30 130MPBK095
5089261-64 15" 38cm 64 H30 150MPBK095
5089261-66 16" 40cm 66 H30 160MPBK095
5089261-72 18" 45cm 72 H30 180MPBK095
5089261-80 20" 50cm 80 H30 200MPBK095
HUSQVARNA LAMINATED BARS
GUIDE BAR SPARES
TECHNICAL SPECIFICATIONS GLOSSARY | 2322 | TECHNICAL SPECIFICATIONS GLOSSARY
SOLID BAR & CHAIN FIT-UP GUIDELAMINATED BAR & CHAIN FIT-UP GUIDE
327P
T5S
136L
i / T
536L
iXP
536L
iXP
T435
/ 3
34T
338X
PT
T540
XP
236
/ 23
6e
240e
/ 2
40e
Trio
/ 13
5e /
321
E
435
e
440e
II /
445
e II
/ 44
5e-T
rio
445
II /
450
II /
450e
II
346X
P /
346X
P-Tr
io /
550
XP-
Trio
550X
P
357X
P /
455R
/ 4
55R-
AT
555
-AT
460
562X
P /
556-
AT
365
/ 37
2XP
570
/ 57
5XP
/ 57
6XP
570
-AT
/ 57
6XP-
AT
390X
P /
395X
P
3120
XP
MINI BAR MOUNT (A041 / A095)
SMALL BAR MOUNT (K095)
LARGE BAR MOUNT (D009)
BAR LENGTH IN./CM.
CHAIN PITCH
IN.
GAUGE, IN./CM.
PART NO. DRIVE LINKS
CHAIN TYPE
PART NO
LAMINATED BAR WITH NOSE SPROCKET CHAINS
10/25 1/4” .050/1.3 5758422-58 58 H00 5018440-58
O 12/30 1/4” .050/1.3 5758422-64 64 H00 5018440-64
O O 10/25 3/8 LP .043/1.1 5019595-40 40 H38 5818079-40
O 12/30 3/8 LP .043/1.1 5019595-45 45 H38 5818079-45
O 14/35 3/8 LP .043/1.1 5019595-52 52 H38 5818079-52
O 12/30 3/8 LP .050/1.3 5768307-45 45 H37 LowVib 5769365-45
14/35 3/8 LP .050/1.3 5768307-52 52 H37 LowVib 5769365-52
O 16/40 3/8 LP .050/1.3 5019592-56 56 H37 LowVib 5769365-56
O O O 12/30 3/8 LP .050/1.3 5019592-45 45 H37 LowVib 5769365-45
O O 14/35 3/8 LP .050/1.3 5019592-52 52 H37 LowVib 5769365-52
O O 16/40 3/8 LP .050/1.3 5019592-56 56 H37 LowVib 5769365-56
O O O O O O O O 13/33 .325 .050/1.3 5089261-56 56 H30 LowVib 5018406-56
O O O O O O O 15/38 .325 .050/1.3 5089261-64 64 H30 LowVib 5018406-64
O O O O O O O 16/40 .325 .050/1.3 5089261-66 66 H30 LowVib 5018406-66
O O O O O O O 18/45 .325 .050/1.3 5089261-72 72 H30 LowVib 5018406-72
O O O O O 20/50 .325 .050/1.3 5089261-80 80 H30 LowVib 5018406-80
O O O O O O O 13/33 .325 .058/1.5 5089121-56 56 H25 LowVib 5018404-56
O O O O O O 15/38 .325 .058/1.5 5089121-64 64 H25 LowVib 5018404-64
O O O O O O 16/40 .325 .058/1.5 5089121-66 66 H25 LowVib 5018404-66
O O O O O O 18/45 .325 .058/1.5 5089121-72 72 H25 LowVib 5018404-72
O O * O O 20/50 .325 .058/1.5 5089121-80 80 H25 LowVib 5018404-80
O O O 15/38 3/8 .058/1.5 5089141-56 56 H42 LowVib 5018414-56
O O O 16/40 3/8 .058/1.5 5089141-60 60 H42 LowVib 5018414-60
O O 18/45 3/8 .058/1.5 5089141-68 68 H42 LowVib 5018414-68
O O O 20/50 3/8 .058/1.5 5101535-72 72 H42 LowVib 5018414-72
O O O 15/38 3/8 .058/1.5 5089131-56 56 H42 LowVib 5018414-56
O O O 16/40 3/8 .058/1.5 5089131-60 60 H42 LowVib 5018414-60
O O O O O 18/45 3/8 .058/1.5 5089131-68 68 H42 LowVib 5018414-68
O O O O O 20/50 3/8 .058/1.5 5442855-72 72 H42 LowVib 5018414-72
= Standard Cutting Equipment * = 455R-AT with 20” Laminated Bar from late 2015
O = Optional Cutting Equipment
327P
T5S
136L
i / T
536L
iXP
536L
iXP
T435
/ 3
34T
338X
PT
T540
XP
236
/ 23
6e
240e
/ 2
40e
Trio
/ 13
5e /
321
E
435
e
440e
II /
445
e II
/ 44
5e-T
rio
445
II /
450
II /
450e
II
346X
P /
346X
P-Tr
io /
550
XP
Trio
550X
P
357X
P /
455R
/ 4
55R-
AT
555
-AT
460
562X
P /
556-
AT
365
/ 37
2XP
570
/ 57
5XP
/ 57
6XP
570
-AT
/ 57
6XP-
AT
390X
P /
395X
P
3120
XP
MINI BAR MOUNT (A041 / A095)
SMALL BAR MOUNT (K095) LARGE BAR MOUNT (D009)
BAR LENGTH IN./CM.
CHAIN PITCH
IN.
GAUGE, IN./CM.
PART NO. DRIVE LINKS
CHAIN TYPE PART NO
SOLID BAR WITH REPLACEABLE BAR NOSE CHAINS
O O O O O O O 18/45 .325 .058/1.5 502 44 00-72 72 H25 LowVib 501 84 04-72
O O O O O 20/50 .325 .058/1.5 608 00 00-09 80 H25 LowVib 501 84 04-80
O O O 16/40 3/8 .058/1.5 608 00 00-17 60 H42 LowVib 501 84 14-60
O O O 18/45 3/8 .058/1.5 501 95 77-68 68 H42 LowVib 501 84 14-68
O O 20/50 3/8 .058/1.5 501 95 77-72 72 H42 LowVib 501 84 14-72
O O O O 16/40 3/8 .058/1.5 501 95 69-60 60 H42 LowVib 501 84 14-60
O O O O 18/45 3/8 .058/1.5 501 95 69-68 68 H42 LowVib 501 84 14-68
O O O O O O 20/50 3/8 .050/1.3 608 00 00-46 72 H46 LowVib 501 84 25-72
O O 20/50 3/8 .058/1.5 501 95 69-72 72 H42 LowVib 501 84 14-72
O O O O O O 22/55 3/8 .058/1.5 501 95 69-76 76 H42 LowVib 501 84 14-76
O O O O O 24/60 3/8 .058/1.5 501 95 69-84 84 H42 LowVib 501 84 14-84
O O O 28/70 3/8 .058/1.5 501 95 69-92 92 H42 LowVib 501 84 14-92
O O 32/81 3/8 .058/1.5 608 00 00-54 105 H42 LowVib 501 84 14-05
O O 32/81 3/8 .063/1.6 608 00 00-55 105 H45 LowVib 588 41 22-01
O O 32/81 .404 .063/1.6 608 00 00-62 95 H57 501 84 34-95
O O 36/90 3/8 .063/1.6 502 43 96-15 115 H45 LowVib 588 41 22-02
O O O 20/50 .404 .063/1.6 502 07 73-65 65 H57 501 84 34-65
O O O 24/60 .404 .063/1.6 502 07 73-76 76 H57 501 84 34-76
O 28/70 .404 .063/1.6 502 07 73-84 84 H57 510 09 41-01
O O 36/90 .404 .063/1.6 608 00 00-63 104 H57 501 84 34-04
O O 42/107 .404 .063/1.6 502 07 73-22 122 H57 510 09 43-01
LASER TIP SOLID BAR CHAINS
O O O 18/45 3/8 .058/1.5 5019580-68 68 H42 LowVib 501 84 14-68
O O O 20/50 3/8 .058/1.5 5019580-72 72 H42 LowVib 501 84 14-72
O O O 24/60 3/8 .058/1.5 5019580-84 84 H42 LowVib 501 84 14-84
O O O 28/70 3/8 .058/1.5 5019580-92 92 H42 LowVib 501 84 14-92
O O 28/70 .404 .063/1.6 5015896-01 84 H57 510 09 41-01
= Standard Cutting Equipment O = Optional Cutting Equipment
TECHNICAL SPECIFICATIONS GLOSSARY | 2524 | TECHNICAL SPECIFICATIONS GLOSSARY
HUSQVARNA CHAIN TYPE
FILE DIAMETER INCH / MM
FILE PART NO.
FILE KIT PART NO.
ROLLER GUIDE PART NO.
COMBINATION GUIDE PART NO.
DEPTH GAUGE PART NO.
H00 5/32” / 4.0mm5100957-01 5100957-02
5806875-01 5056981-18 5806874-01 –
H35, 36 5/32” / 4.0mm5100957-01 5100957-02
5056981-38 5052437-01 – 5056981-03
H37 5/32” / 4.0mm5100955-01 5100955-02
5796536-01 5052437-01 – 5056981-03
H38 4.5mm 5772337-01 – 5795588-01 – 5056981-03
H30 3/16” / 4.8mm5100955-01 5100955-02
5056981-27 – 5056981-08 5056981-00
H21, 22, 23, 25, 26, 28 3/16” / 4.8mm5100955-01 5100955-02
5056981-25 5056981-10 5056981-09 5056981-00
H42, 45, 46, 47, 48, 50, 52 7/32” / 5.5mm5100956-01 5100956-02
5056981-30 – 5052435-01 5056981-01
H51, 54, 58 7/32” / 5.5mm5100956-01 5100956-02
– 5759915-01 – 5056981-01
H56S, 57, 58S, 64, 64S, 65, 66 7/32” / 5.5mm5100956-01 5100956-02
5056981-92 5056981-15 – 5056981-02
FILING EQUIPMENT GUIDE
GUARD APPLICATION GUIDE
TRIMMER, BRUSHCUTTER & CLEARING SAW MODELS 12
2C
124L
/ 12
5L
125L
D /
128L
D 12
2LD
125R
/ 12
8R
233R
J
323L
/ 3
26LS
32
7LS
524L
/ 5
25LS
T 52
5RJD
324L
D /
325L
D 32
7LD
335L
S /
535L
S 53
5RJ
324R
X /
325
RX
327R
X /
525
RS
135R
/ 3
33R
335R
X /
535
RX
535R
XT
343R
/ 3
45RX
345F
X /
345
FR
355F
X /
555
FX
Trimmer Guards5039771-01 S S S S1 S
5039543-01 S
5373494-03 S S
5744795-01 S
5024650-01 O
5372973-01 O O
Combi Guards5450309-01 S S
5039342-02 S S S S
5373316-01 S S
Blade Guards5372885-01 (300mm Blades) S S
5372171-01 (200mm Blades) S
5013204-02 (200mm Blades) adaptor incl. O
5745067-02 (225mm Blades) Aluminium S
5745067-02 O
5024649-01 O
5372974-01 O
Support Cups5038901-01 S S S S
5039018-02 O
5038901-02 S S
5021570-02 S
Transport Guards5373129-01 S S S S S
5022623-01 S S
S = Standard Equipment S1 = Standard Equipment with trimmer attachment O = Optional Equipment
TRIMMER HEAD & BLADE APPLICATION GUIDE
TRIMMER, BRUSHCUTTER & CLEARING SAW MODELS 13
6LIL
536L
IL /
53
6LIR
536L
ILX
/
536L
IRX
122C
/12
4C /
12
8C
124L
122L
D /
128L
D /
322L
128R
135R
/ 5
35RX
/
535R
XT
323L
326L
S /
327L
S
524L
525L
ST
324L
DX /
32
7LDX
525R
JD
335L
S /
535L
S
324R
X /
327
RX
525R
S
233R
J
535R
J
333R
/ 3
35RX
343F
R /
345F
R
355F
X /
555
FX
TRIMMER HEADS
Manual Heads
578447401 S35 - M10 O O O O O O O O O O O
578447601 S35 - M12 O O O O
575989801 Alloy Head (Fixed Line)
O O O O O O O S O O O O O O O O O
578447801 Trimmy SII M12 (Free-wheeling plate)
O O O O O O
Tap 'N Go Heads
966674401 T25 3/8" RH S
966674401 T25 M10 S S O O O O O O O O O
966674401 T25 3/8" LH S
585347901 Tap n' Go, Single Line S
579294001 T25B S S
578446301 T35 - M10 O O S O S O S O S O S
578446501 T35 X - M10 O O O S O S O S O S O
544909002 T35 - M12 S S S
578446601 T35 X - M12 O O O O O
578446801 T45 X - M12 O S O O S O
578447001 T55 X - M12 O O
Automatic Heads
531009226 Auto 55 - M12 O O O O O
TriCut Heads
578449101 Tri-cut M10 O O O O O O O O O O O
578449301 Tri-cut M12 O O O O
BLADES
Grass Blades
578444001 225-8T 1in O* O O O O O O O O O O O O
578443701 255-4T 1in S S O O S S S S O S S S S O O O
Multi Blades
578444901 255-3T 1in S O O O O O O
578444701 275-4T 1in O O O O O O
578444501 300-3T 1in O O O S S O
Shredder Blade (Suits 343FR/345FR only)
5784453-01 Shredder Blade - 1in O
Saw Blades Maxi
578443101 200-26T 1in O O O O O O O
Saw Blades Scarlett
578442501 200-22T 1in O O O O O O S S
578442601 200-22T 20mm
578442701 225-24T 1in O O O O O O O
KITS
537048501 J-handle Kit ** O ** ** ** ** **
544249601 J-handle Kit O **
544842901 Shredder Blade Kit O
* = Not applicable to 124L, 122LD, 322L O = Optional Equipment ** = J Handle Kit Components Included
S = Standard Equipment
WITH 325 YEARS OF ENGINEERING EXCELLENCE BEHIND US, HUSQVARNA IS THE BRAND YOU CAN TRUST.The strength of the Husqvarna brand has been forged by a history that goes all the way back to 1689, when Husqvarna first laid the foundation for the engineering expertise that has led us to develop world class outdoor power equipment today. Husqvarna aims to provide you total satisfaction with product performance, reliability and safety.
With this in mind, Husqvarna offers a 5 year Domestic Warranty* period when you buy genuine Husqvarna oil with your new Husqvarna product.
* Conditions apply, ask instore for full details or visit www.husqvarna.com
FOR THE LATEST NEWS,PRODUCT INFORMATION AND HELP.The Husqvarna website offers all the product information you’d expect but you’ll also find a whole lot more to help you get the perfect results for every job. There are regular campaign offers, help and advice on products as well as accessories to add versatility to your machines, in addition to an extensive range of professional clothing. Should you decide you need to speak to one of our representatives directly our dealer locators will point you in the right direction of our closest Husqvarna specialist.
Product information and instruction manuals.Here on the husqvarna.com site you can download manuals for all your Husqvarna machines as well as additional information to help you in your work.
Personalise your product search.Our latest search function allows you to narrow your search with specific information. This helps us to guide you to the best machine for the features you are looking for.
Visit our mobile sites.We want to make it as easy as possible for our customers to
receive and find information from Husqvarna. Our mobile site has been tailor-made for smartphones to help connect to
our different information channels - the website, the product catalogue and other print materials, plus our channels on
YouTube and Facebook.
Husqvarna is a registered trademark. Copyright © 2015 HUSQVARNA. All rights reserved.
Husqvarna Australia Pty Ltd. ABN 45 115 475 619Locked Bag 5, Central Coast BC, NSW, 2252 Phone: 1300 804 105 Fax: 02 4352 7499 Website: www.husqvarna.com.au
Husqvarna New Zealand Ltd. Company No. 111 861.PO Box 76-437, Manukau City, Auckland 2241 Phone: 09 920 2410 Fax: 09 920 2429 Website: www.husqvarna.co.nz
Part
Num
ber:
5017
112-0
4
Com
m R
ef: H
Q AC
CESS
CAT