2015/1 EX-WORKS EURO PRICE LIST · 2015/1 EX-WORKS EURO PRICE LIST. 2015/1 1 Tile adhesive Cement...
Transcript of 2015/1 EX-WORKS EURO PRICE LIST · 2015/1 EX-WORKS EURO PRICE LIST. 2015/1 1 Tile adhesive Cement...
2015/1 EX-WORKS EURO PRICE LIST
2015/1
1
Tile adhesiveCement based adhesive for fixing tile or similar small medium sized finishes. For interior floors and walls in private or similar dwellings, it has good work-ability. The high thixotrophy enables to lay wall tiles downwards on the conventional cement substrates whitout slipping.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg) 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: 3-4 kg/m2
VitrA Fix FIXER White 20 kg is only available for Mersin Factory orders.
Special thick bed tile adhesiveCement based tile adhesive for fixing large sized finishes for interior and exterior floors. Facility of fixing the layer from 3 up to 20 mm. thickness depending on the state of the base. It allows to fix ceramic tiles, glass mo-saic, terracotta, brick slips (porcelain tiles for interior floors), stone, marble etc. Applications can be made on all cement based floors. It is resistant to outside weather conditions and freezing.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 4-5 kg/m2
Porcelain tile adhesiveCement based flexible tile adhesive, containing mixed binding agents, for tiling on all kinds of floor, wall, small and medium sized porcelain tiles, natural stones and marbles. VitrA Fix FLEXY is a powerfull adhesive, offer-ing resistance to heat, moisture and frost. It can be used on heated floors, exterior insulation materials on walls.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 3-4 kg/m2
High performance flexible tile adhesive for porcelain tilesHigh performance, cement based flexible tile adhesive, containing mixed bind-ing agents and fibers, for tiling in many types of new or renovation work. VitrA Fix FLEX PORSELEN is a powerfull adhesive, offering high resistance to heat, moisture and frost. It can be used on heated floors, exterior insulation materials on walls. Especially it is recommended in heavy traffic areas for usage. It is suit-able for fixing porcelain tiles, bricks, terracotta, natural stone, marble, granite, glass mosaic and all kind of ceramic tiles on pre-cast concrete, cement mortar, cement-lime mortar renderings, tiles (with VitrA Fix FILM PLUS primer), plas-ter board panels.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 3-4 kg/m2
ADHESIVES PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
F11101025 F11103025F11201020 F11203020
GREYWHITEGREY WHITE
25 kg25 kg20 kg20 kg
0,260,370,360,47
6,509,257,209,40
F12101025F12103025
GREYWHITE
25 kg25 kg
0,430,51
10,7512,75
F17401025 F17403025
GREYWHITE
25 kg25 kg
0,480,55
12,0013,75
F12201025F12203025
GREYWHITE
25 kg25 kg
0,740,83
18,5020,75
FIXER
FLEXY
COTTO
FLEX PORSELEN
2015/1
2
ADHESIVES PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
F12401025F12403025
GREYWHITE
25 kg25 kg
0,770,88
19,2522,00
F14201020F14203020
GREYWHITE
20 kg20 kg
1,051,28
21,0025,60
F12301020 GREY 20 kg 0,65 13,40
F13501020 F13503020
GREYWHITE
20 kg20 kg
1,021,19
20,4023,80
High performance flexible andquick setting tile adhesiveHigh performance, quick setting, flexible cement based tile adhesive, in-corporating mixed binders, for fixing ceramic tile finishes that are new or being renovated. High water and frost resistance after hardening. Due to its rapid bonding, busy premises are put out of action at less time. It allows grouting 3-5 hours after fixing. It is suitable to fix porcelain tiles, terracotta, natural stone, marble, granite, glass mosaic and all kinds of ceramic tiles on pre-cast concrete, cement mortar, cement-lime mortar renderings, plaster board panels.
Display: 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: 3-5 kg/m2
Quick-setting ceramic tile adhesiveQuick-setting, water resistant, adhesive for fixing ceramic finishes to the bases that are new or being renovated. It is suitable to internal walls and floors, cement based screeds/render coat; concrete screeds or self levelling finishings. Before the application of high porous surfaces, apply VitrA Fix FILM as a primer. Grouting should be done at least 3-5 hours after fixing.
Display: 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: 3-4 kg/m2
High performance flexible and quicksetting pourable tile adhesiveHigh performance flexible and quick setting, pourable cement based tile adhesive, incorporating mixed binders, for fixing any type of ceramic tile fin-ishes that are new or being renoveted. High water and frost resistance after hardening. Due to its rapid bonding, busy premises are put out of action at less time. It allows grouting 3-5 hrs. after application. It is suitable to fix por-
celain tiles, terracotta, natural stone, marble, granite, glass mosaic and all kind of ceramic tiles on interior or exterior floors. ıt also allows to make application on, tile on tile with the help of VitrA Fix FILM PLUS primer.
Display: 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: Changes acc. to tile dimension (4-7 kg/m2)
FLEX RAPID
RAPID SET
FLOOR PLUS
POOL
High performance flexible tile adhesive for pools and wet areasHigh performance, cement based flexible tile adhesive, containing mixed binding agents and fiber for tiling in many types of new or renovation work. VitrA Fix POOL is a powerful adhesive, offering high resistance to heat, moisture and frost. It can be used on heating floors, especially it is recom-mended to use in private swimming pools, wet areas like bathroom, wc, kitchen it is suitable to fix all kinds of pool tiles, porcelain tiles, bricks, terra-
cotta, natural stone, marble, granite, glass mosaic on pre-cast concrete,cement mortar, cement-lime mortar renderings, plaster board panels.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kgConsumption: 3-4 kg/m2
2015/1
3
ADHESIVES PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
F12601026 GREY 25,4 kg20 kg powder
+5,4 lt liquid
1,30 33,02
F17101020 GREY 20 kg 1,70 34,00
F17203020 WHITE 20 kg 0,91 18,20
F17503020 WHITE 20 kg 1,04 20,80
F13603005F13603015
WHITEWHITE
5 kg15 kg
2,802,38
14,0035,70
High performance ready mixed tile adhesiveVitrA Fix HP is used to apply sandstone, earthenware, porcelain glazed til-ing and natural stones, on concrete, cement based plasters, gypsium board panels, wooden panels, old ceramic, cellular concrete, paintwork. It is also suitable to fix tiles on timber floors, using suitable primers (VitrA Fix FILM PLUS). It has high flexibility for fixing tiles on internal walls and external walls. Use V5-V6 type steel throwel during application.
Display: 15 and 5 kg plastic cans (15 kg - 48 cans - Total 720 kg)Consumption: 2-3 kg/m2
HP
High performance two components tile adhesiveCement based, high performance two component, super flexible, high ad-
hesion tile adhesive for big size tiles and slabs especially for exterior walls. It has high water and frost resistance. Suitable surfaces; concrete, cement based finishing coats existing flooors, heated floors and floors with heavy traffic. VitrA Fix ULTRA SYSTEM is ideally suited for fixing tiles on olympic swimming pools, water tanks, industrial application where high mechanical strength and resistance required.
Display: 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: Changes acc. to tile dimension (4-7 kg/m2)
ULTRA SYSTEM
MARBLE & STONE
Fast setting, super white cementitious adhesivefor natural marbles and stonesCement-based and rapid setting tile adhesive to fix all kinds of natural mar-bles and stones to floors and walls. Applied on cement screeds, cement based renders, cured concrete and porous surfaces. It allows grouting 5 hours after fixing. VitrA Fix LATEX has to be used for fixing porcelain and mosaic tiles. The weight of marble should be considered on the vertical applications.
Display: 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: Changes according to tile dimension. Avr. 4-5 kg/m2
MARBLE & STONE SELECTHigh performance flexible and quick setting pourable tile adhesiveCement-based and rapid setting, flexible tile adhesive with high tensile strength which is used to fix naturel marble and stones. Applied on ce-ment screeds, cement based renders, cured concretes and other absorbend or non absorbend surfaces. (Refer to technical legend for applications on wooden floors). It allows grouting 5 hours after fixing. It is suitable for verti-cal applications of ceramic, porcelain and mosaic tiles and medium sizes of marbles. The weight of marble, particularly the heavy or big sizes of marble should be considered on the vertical applications.
Display: 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: Changes according to tile dimension. Avr. 4-5 kg/m2
TIMBER FLEX
Flexible ceramic tile adhesive for wooden floorsHigh performance flexible quick-setting ceramic tile adhesive formulated to give greater flexiblity and adhesion when fixing low porosity and fully vitrified porcelain and floor tiles without the need to incorporate an ad-mixture in the adhesive on wooden and timber floors. It allows grouting 3-5 hours after fixing.
Display: 20 kg kraft sacks (80x110x100 cm pallets - 60 sacks - Total 1200 kg)Consumption: 3-5 kg/m2
2015/1
4
GROUTING MATERIALS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
1-6 mm
Grouting materialPlasticised and water repellent cement based grout for all porous or non porous tiles for joints from 1-6 mm. Easy application and crackless product for joints. It is suitable to use on internal and external walls and floors. For outside floors which are subjected to high loads and for communual kitch-ens and showers use VitrA Fix FLEX 3-10 mm.
Display: 10-20 kg kraft sacks (pallets 1000 and 1200 kg) 5 kg polyethilen bags (pallets 720 kg) 1 kg polyethilen bags (pallets 432 kg) (36 box x 12 pcs)
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
SILVERSILVERSILVERSILVERDARK GREYDARK GREYDARK GREYDARK GREYANTHRACITEANTHRACITEANTHRACITEANTHRACITEICE GREYICE GREYICE GREYICE GREYWHITEWHITEWHITEWHITEJASMINJASMINJASMINJASMINNEW IVORYNEW IVORYNEW IVORYNEW IVORYCREMECREMECREMECREMEPINKPINKPINKPINKCOTTOCOTTOCOTTOCOTTOPRESTIGE REDPRESTIGE REDPRESTIGE REDPRESTIGE REDBEIGEBEIGEBEIGEBEIGESAHARA BEIGESAHARA BEIGESAHARA BEIGESAHARA BEIGEPETRA BEIGEPETRA BEIGEPETRA BEIGEPETRA BEIGEBAHAMA BEIGEBAHAMA BEIGEBAHAMA BEIGEBAHAMA BEIGEEFES BEIGEEFES BEIGEEFES BEIGEEFES BEIGE
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1,100,900,71
0,601,10
0,900,750,651,351,13
0,930,861,000,780,640,581,10
0,800,620,531,10
0,900,700,601,10
0,850,700,631,14
0,790,650,591,351,15
0,920,854,203,503,10
3,007,707,006,406,001,10
0,900,600,551,200,960,850,681,200,960,850,681,10
0,900,750,651,200,960,850,68
1,104,507,10
12,001,10
4,507,50
13,001,355,659,30
17,201,003,906,4011,60
1,104,006,20
10,601,10
4,507,00
12,001,10
4,257,00
12,601,143,956,5011,80
1,355,75
9,2017,004,2017,5031,00
60,007,70
35,0064,00
120,001,10
4,506,0011,001,20
4,808,50
13,601,20
4,808,50
13,601,10
4,507,50
13,001,20
4,808,50
13,60
2015/1
5
GROUTING MATERIALS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
RUSTIK 3-20 mm
Natural effected grouting materialPlasticised water resistance, cement based and natural effected grout for all porous or non porous tiles for joints from 3-20 mm. Crackless wide joint application allows natural effects on terra cotta, big size tiles, mosaics, natu-ral stones. It is suitable for interior and exterior floors. It allows decorative application on floor tiles.
Display: 20 kg kraft sacks (80x110x100 cm pallets 48 sacks 1200 kg)
1-6 mm F21105801F21105805F21105810F21105820F21106001F21106005F21106010F21106020F21106801F21106805F21106810F21106820F21107001F21107005F21107010F21107020F21107101F21107105F21107110F21107120F21107201F21107205F21107210F21107220F21107501F21107505F21107510F21107520F21107801F21107805F21107810F21107820F21109001F21109005F21109010F21109020F21109201F21109205F21109210F21109220F21109501F21109505F21109510F21109520F21109801F21109805F21109810F21109820
PRESTIGE YELLOWPRESTIGE YELLOWPRESTIGE YELLOWPRESTIGE YELLOWBLACKBLACKBLACKBLACKPRESTIGE BLACKPRESTIGE BLACKPRESTIGE BLACKPRESTIGE BLACKNEW BROWNNEW BROWNNEW BROWNNEW BROWNLIGHT BROWNLIGHT BROWNLIGHT BROWNLIGHT BROWNSTARDUSTSTARDUSTSTARDUSTSTARDUSTCARAMELCARAMELCARAMELCARAMELMOCHA BROWNMOCHA BROWNMOCHA BROWNMOCHA BROWNBLUEBLUEBLUEBLUEPRESTIGE BLUEPRESTIGE BLUEPRESTIGE BLUEPRESTIGE BLUEGREENGREENGREENGREENPRESTIGE GREENPRESTIGE GREENPRESTIGE GREENPRESTIGE GREEN
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
1 kg5 kg
10 kg20 kg
2,301,951,701,601,701,351,10
1,002,402,001,651,561,351,161,071,01
0,770,610,530,46
1,150,900,750,661,10
0,900,750,652,201,901,601,501,701,401,10
1,002,952,652,372,11
1,401,15
0,880,804,504,003,753,60
2,309,75
17,0032,00
1,706,75
11,0020,00
2,4010,0016,5031,20
1,355,80
10,7020,20
0,773,055,309,20
1,154,507,50
13,201,10
4,507,50
13,002,209,50
16,0030,00
1,707,0011,00
20,002,9513,25
23,7042,20
1,405,75
8,8016,004,50
20,0037,50
72,00
F22301020 GREY 20 kg 0,70 14,00
2015/1
6
FLEX 0-3 mm
Flexible, silicone additive grouting materialCement based, silicone additive and flexible grouting material for all porous or non porous tiles for joints from 0 to 3 mm. It’s suitable to use on internal and external walls and floors. Provides easy application and crackles sur-faces. Resistant to UV and outdoor conditions. Especially recommended for glass tiles and rectified tiles.
Display: 10-20 kg kraft sacks (pallets 1000 and 1200 kg) 5 kg polyethilen bags (pallets 720 kg)
GROUTING MATERIALS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
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
SILVERSILVERSILVERDARK GREYDARK GREYDARK GREYANTHRACITEANTHRACITEANTHRACITEICE GREYICE GREYICE GREYWHITEWHITEWHITEJASMINJASMINJASMINNEW IVORYNEW IVORYNEW IVORYCREMECREMECREMEPINKPINKPINKCOTTOCOTTOCOTTOPRESTIGE REDPRESTIGE REDPRESTIGE REDBEIGEBEIGEBEIGESAHARA BEIGESAHARA BEIGESAHARA BEIGEPETRA BEIGEPETRA BEIGEPETRA BEIGEBAHAMA BEIGEBAHAMA BEIGEBAHAMA BEIGEEFES BEIGEEFES BEIGEEFES BEIGEPRESTIGE YELLOWPRESTIGE YELLOWPRESTIGE YELLOWBLACKBLACKBLACKPRESTIGE BLACKPRESTIGE BLACKPRESTIGE BLACKNEW BROWNNEW BROWNNEW BROWNLIGHT BROWNLIGHT BROWNLIGHT BROWNSTARDUSTSTARDUSTSTARDUSTCARAMELCARAMELCARAMELMOCHA BROWNMOCHA BROWNMOCHA BROWNBLUEBLUEBLUEPRESTIGE BLUEPRESTIGE BLUEPRESTIGE BLUEGREENGREENGREENPRESTIGE GREENPRESTIGE GREENPRESTIGE GREEN
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
1,651,301,211,651,401,21
1,901,55
1,401,401,18
1,091,401,12
1,001,601,301,201,501,10
1,001,15
0,950,891,601,301,204,504,103,909,508,208,001,601,301,201,721,461,331,721,461,331,601,301,201,721,461,333,853,203,002,732,342,203,503,002,901,951,561,431,080,960,861,10
0,960,871,401,301,203,25
2,802,601,801,501,404,203,703,501,801,501,406,105,405,20
8,2513,00
24,208,25
14,0024,20
9,5015,50
28,007,0011,8021,807,0011,20
20,008,0013,00
24,007,50
11,0020,00
5,759,50
17,808,0013,00
24,0022,5041,0078,0047,5082,00
160,008,0013,00
24,008,60
14,6026,60
8,6014,6026,608,0013,00
24,008,60
14,6026,6019,25
32,0060,00
13,6523,4044,00
17,5030,0058,00
9,7515,60
28,605,409,6017,205,509,60
17,407,00
13,0024,0016,25
28,0052,009,0015,00
28,0021,0037,0070,00
9,0015,00
28,0030,5054,00
104,00
2015/1
7
GROUTING MATERIALS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
FLEX 3-10 mm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
SILVERSILVERSILVERDARK GREYDARK GREYDARK GREYANTHRACITEANTHRACITEANTHRACITEICE GREYICE GREYICE GREYWHITEWHITEWHITEJASMINJASMINJASMINNEW IVORYNEW IVORYNEW IVORYCREMECREMECREMEPINKPINKPINKCOTTOCOTTOCOTTOPRESTIGE REDPRESTIGE REDPRESTIGE REDBEIGEBEIGEBEIGESAHARA BEIGESAHARA BEIGESAHARA BEIGEPETRA BEIGEPETRA BEIGEPETRA BEIGEBAHAMA BEIGEBAHAMA BEIGEBAHAMA BEIGEEFES BEIGEEFES BEIGEEFES BEIGEPRESTIGE YELLOWPRESTIGE YELLOWPRESTIGE YELLOWBLACKBLACKBLACKPRESTIGE BLACKPRESTIGE BLACKPRESTIGE BLACKNEW BROWNNEW BROWNNEW BROWNLIGHT BROWNLIGHT BROWNLIGHT BROWNSTARDUSTSTARDUSTSTARDUSTCARAMELCARAMELCARAMELMOCHA BROWNMOCHA BROWNMOCHA BROWNBLUEBLUEBLUEPRESTIGE BLUEPRESTIGE BLUEPRESTIGE BLUEGREENGREENGREENPRESTIGE GREENPRESTIGE GREENPRESTIGE GREEN
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
5 kg10 kg20 kg
1,180,990,911,21
1,080,931,451,201,101,181,141,021,03
0,860,771,201,000,901,25
0,990,900,810,630,791,251,05
0,963,903,663,507,707,0
6,801,25
0,990,901,271,080,981,271,080,981,301,10
0,951,271,081,983,102,782,582,101,801,70
2,402,001,801,501,201,10
0,930,830,670,870,760,691,301,05
0,962,502,202,001,601,301,203,352,952,801,401,10
1,005,004,604,40
5,909,90
18,206,05
10,8018,60
7,2512,0022,00
5,9011,40
20,405,15
8,6015,406,00
10,0018,00
6,259,90
18,004,056,30
15,806,25
10,5019,2019,5036,6070,0038,5070,00136,00
6,259,90
18,006,35
10,8019,60
6,3510,8019,606,50
11,0019,00
6,3510,8039,6015,50
27,8051,6010,5018,0034,0012,00
20,0036,00
7,5012,0022,00
4,658,30
13,404,357,60
13,806,50
10,5019,2012,50
22,0040,00
8,0013,00
24,0016,75
29,5056,007,0011,00
20,0025,0046,0088,00
Flexible, silicone additive grouting materialPlasticised water and frost resistance, silicone additive and flexible cement based grout for all porous or non porous tile, for joints from 3-10 mm. Easy application and crackless surface excellent flexibility for private or public showers, private swimming pools, heated floors, heavy traffic cross lines, business centers etc. It has high water repellency effect for clean and hy-genic surfaces.
Display: 10-20 kg kraft sacks (pallets 1000 and 1200 kg) 5 kg polyethilen bags (pallets 720 kg)
2015/1
8
POOL G 2-10 mm
EPOXY
F24401015F24403015
GREYWHITE
15 kg15 kg
2,602,52
39,0037,80
F22401005F22403005F22405005F22406005
GREYWHITEBEIGEANTHRACITE
5 kg5 kg5 kg5 kg
11,7511,75
12,0012,00
58,7558,75
60,0060,00
GROUTING MATERIAL CONSUMPTION TABLE
tile length
tile width
joint width
tile thickness
A : Tile length (mm)
B : Tile width (mm)
C : Tile thickness (mm)
D : Joint width (mm)
* Calculation formula is theoretical. Please consider 10% more of calculated quantity because of the application casualities.
E : Density
- 1-6 mm : 1,4
- FLEX 0-3 mm : 1,4
- FLEX 3-10 mm : 1,4
- POOL G 2-10 mm : 1,3
- RUSTIK 3-20 mm : 1,5
- EPOXY : 1,6
Grouting MaterialConsumption (kg/m2) =
(A + B) x C x D x E
(A x B)
2-10 mm High perfromance, cement based, flexible grouting materialSpecial formulated, rapid setting cement based grouting material, especially used for swimming pools, laboratories, kitchens, hospitals etc, where hygine and slightly acid and alkaline resistance required. It is ready for light pedes-train traffic 3 hrs after application. It is also recommended to use in salty sea water tanks. High water repellency and non crackless application for joints up to 2-10 mm. For more technical information please consult technical as-sistance. It requires the recommendations of CG2 with EN 13888,
Display: 15 kg plastic cans (pallets 660 kg)
Acid and alcaly resistant, two component epoxy resin based grouting and fixing materialVitrA Fix EPOXY is two component solvent free epoxy resin based grout for fixing tiles creating acid and alkali - resistant joints between tiles. It has high performance under mechanical compression stresses, washing operations, impact and shocks. It is avalible for communual kitchens, food proceses, swimming pools, hospitals, car service stations, supermarkets etc. It is antibacterial and easy to apply when compared with other epoxy based products. It is also suitable to fix tiles where cement based products are not suitable such as stainless steel etc. applications. For milk processing facili-ties and units, please consult technical service.
Display: 5 kg metal cans (pallets 96 cans 480 kg)
GROUTING MATERIALS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
2015/1
9
COLOR CHARTS FOR GROUTING MATERIALS
1-6 mm FLEX0-3 mm
FLEX3-10 mm
POOL G2-10 mm
RUSTIK3-20 mm EPOXY
WHITE
CREME
JASMIN
NEW IVORY
BEIGE
BAHAMA BEIGE
SAHARA BEIGE
PETRA BEIGE
EFES BEIGE
CARAMEL
PRESTIGE YELLOW
GREEN
BLUE
PRESTIGE BLUE
ICE GREY
SILVER
DARK GREY
ANTHRACITE
BLACK
PRESTIGE BLACK
STARDUST
LIGHT BROWN
NEW BROWN
MOCHA BROWN
PINK
COTTO
PRESTIGE RED
PRESTIGE GREEN
PRODUCTSCOLORS
2015/1
10
PERFORMANCE IMPROVING PRIMERSand ADDITIVES PRODUCT
CODE COLOUR PACKAGEPRODUCT PRICE
(EURO/kg)PRODUCT PRICE
(EURO)
F31100005 ORANGE 5 lt 3,80 19,00
F31209003F31209010
BLUEBLUE
3 kg10 kg
5,004,82
15,0048,20
F32004003F32004010
ORANGEORANGE
3 kg10 kg
4,554,05
13,6540,50
F33809512 GREEN 12 kg 3,42 41,04
PrimerVitrA Fix FILM is a synthetic resin based primer for the treatment of sur-faces. VitrA Fix FILM reduces the water absorption level of the surface increases the adhesion level of plasterings on ceramic tiles. It is suitable for concrete, plasterboard pannels, gypsium mortars, old ceramic finishes.
Display: 5 lt plastic cansConsumption: 0,100 - 0,200 lt/m2
FILM
High performance adhesion primerImproves the adhesion of mortars on non porous substrates recommended for use on wooden substrates, existing tiles, adhesive residues, rigid vinyl tiles, concrete, cement based screeds, asphalt screeds, chipboard, plywood, sound paint work (polyurethane, epoxy, acrylic). It is water based and sol-vent free.
Display: 10 and 3 kg plastic cansConsumption: 0,300-0,400 kg/m2
FILM PLUS
High performance adhesion primerImproves the adhesion of mortars on non porous substrates recommendedfor use on wooden substrates, existing tiles, adhesive residues, rigid vinyl tiles, concrete, cement based screeds, asphalt screeds, chipboard, plywood,sound paint work (polyurethane, epoxy, acrylic). It is water based and sol-vent free.
Display: 10 ard 3 kg plastic cansConsumption: 0,300-0,400 kg/m2
FILM PLUS EXTRA
FILM PLUS BETONAcrylic resin based primer with mineral filingsAcrylic resin based primer, VitrA Fix FILM PLUS BETON applied before ap-plications of gypsum and cement-based plaster to concrete surfaces. Used as a primer at interior and exterior concrete, wall, ceiling, horizontal and vertical surfaces under the plaster in order to prevent water absorption and increase adherance . Thinned with 50% water.
Display: 12 kg plastic cansConsumption: 0,300-0,400 kg/m2
2015/1
11
PERFORMANCE IMPROVING PRIMERSand ADDITIVES PRODUCT
CODE COLOUR PACKAGEPRODUCT PRICE
(EURO/kg)PRODUCT PRICE
(EURO)
F49100015
F49110006
TRANSPARENT
TRANSPARENT
25 kgComp. A: 17 kgComp. B: 8 kg
6 kgComp. A: 4 kgComp. B: 2 kg
18,50
20,00
462,50
120,00
F49100014 TRANSPARENT 24 kgComp. A: 20 kgComp. B: 4 kg
15,55 373,20
F32100005F32100020
TRANSPARENTTRANSPARENT
5 lt20 lt
4,664,34
23,3086,80
High performance additiveHigh performance, synthetic resin based additive for cement based mortars improving their adhesion impermeability and flexibility. Non-flammable and non toxic high quality product for proffessional usage. It is suitable for cement and gypsium based mortars, cement based plasters levelling screeds, cement based adhesives and groutings tiles which are subjected to high physical on mechanical stress.
Display: 20 and 5 lt plastic cansConsumption: 1/3 VitrA Fix LATEX with 2/3 water by volume of adhesives and grouting materials.
LATEX
Epoxy based, solvent-free, two component primerSolventless, epoxy based impegration primer. Provides a film thickness for coatings on the surface.
Display: 25 (17+8) kg metal cans 6 (4+2) kg metal cansConsumption: 0,600-0,800 kg/m2
Epoxy based, solvent-free, two component primerSolventless, epoxy based impegration primer. Provides a film thickness for coatings on the surface.
Display: 24 (20+4) kg metal cansConsumption: 0,600-0,800 kg/m2
EPOPRIMER
EPOPRIMER S
2015/1
12
SURFACE CLEANING andTREATMENT MATERIALS PRODUCT
CODE COLOUR PACKAGEPRODUCT PRICE
(EURO/kg)PRODUCT PRICE
(EURO)
F33100001 TRANSPARENT 1 lt 14,00 14,00
F33800001 TRANSPARENT 1 lt 10,20 10,20
F33200001 WHITE 1 kg 11,00 11,00
F33300001 TRANSPARENT 0,5 lt 15,00 7,50
F33400001 TRANSPARENT 1 lt 35,00 35,00
F33700001 TRANSPARENT 1 lt 28,00 28,00
Liquid ceramic tile cleaning material (concentrate)Cleaning liquid material to remove any traces of cement on ceramic or porcelain tiles. It is a concentrated product with low pH (pH~1) degree. It is recommended not to use on natural stones such as marble, granite etc. which are sensitive to acids.
Display: 1 ltx10 pcs in boxConsumption: 30-40 m2/lt
NET
Powder ceramic tile cleaning materialCleaning powder to remove traces of cement, grease or rust on matt porce-lain tiles. It is recommended not to use on polished or non-polished natural stones or glazed wall and floor tiles.
Display: 1 kgx12 pcs in boxConsumption: 10-20 m2/kg
P11
STAIN REMOVER
JOINT CLEANER
This product is specially designed to clean and remove residues on floors and wall tiles in a fast and efficient manner. It is also used for cleaning the grouts. Product removes dirts at bathrooms, kitchens and rooms without causing any corrosion, and any damage to stainless steel or plastic surfaces. Joint cleaner should only be used at floors or tiles made up of stone, por-celain, ceramic, or fired clay. Do not use the product at terrazo, granite,marble, or mosaic floors (it removes brightness).
Display: 0,5 lt spray - plastic can
SURFACE PROTECTION AGENTThis product is designed to protect especially marble, granite and terrazo surfaces against all kinds of stains. It does not change original appearance of surfaces. It forms a very brilliant film and protects surfaces against wears and tears attributable to corrosive properties of traffic on surfaces, humid-ity, and grease-based dirts. Stain-Resistant Protection Agent for marble, granite and terrazo provides protection against water, dust, and lime.
Display: 1 lt metal cans Consumption: 10-12 m2/lt
This product is an alkali-based stain removing agent which is used to re-move stains on coating materials such as ceramic tiles, marbles, natural granites, porcelain tiles, and etc. It efficiently removes stains such as coffee, wine, non-alcoholic drinks, oil, juices and etc. from surfaces.
Display: 1 lt plastic cansConsumption: It may vary depending upon the stain to be removed and degree of contamination. 1 lt of product can clean an area of 8 m2 to 10 m2.This rate may change for cleaning of heavy stains and dirts.
NET EXTRA
Liquid ceramic tile cleaning materialCleaning liquid material to remove any traces of cement on ceramic or porcelain tiles. It is a concentrated product with low pH (pH~1) degree. It is recommended not to use on natural stones such as marble, granite etc. which are sensitive to acids.
Display: 1 ltx10 pcs in boxConsumption: 20-30 m2/lt
2015/1
13
WATER PROOFING MATERIALS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
HYDROSIL
HYROSTOP
PROOF S
Water repellent, transparent primerVitrA Fix HYDROSIL is a siloxane resin based product with excellent waterrepellent for many absorbent mineral and even highly alkaline substrates, such as bricks, concrete, lime and stone, natural sand stone and mineral plasters. It is not so suitable for less absorbent, dense natural stone, es-pecially lime stone and marble. VitrA Fix HYDROSIL is high stability to alkalis and U.V. rays. VitrA Fix HYDROSIL allows to surfaces to take breath. Provides good adhesion for paints.
Display: 5 litres plastic cansConsumption: 0,200-0,400 kg/m2 depending on the porosity of the sur-face.
Liquid water proofing coatAcrylic based flexible water proofing material. It is suitable for private public bathrooms, showers, kitchens etc. It can easily apply on cement based sub-strades, existing ceramic coverings, paint and wood, plasterboards. VitrA Fix FILM must be applied before VitrA Fix HYDROSTOP application.
Display: 10 kg plastic canConsumption: Depending on the porosity of the surface, for 1 mm layer / consumption 1,5-2kg/m2.
Semi-Flexible Water proofing material with two componentsCement based, two component, semi flexible water proofing material under ceramic or similar covering materials. It is suitable for special or private showers, kitchens, wc, terrases, balconies where excess water is transfered. Well adopted to cement based mortars and plasters. For applications im-
merssed in water such as swimming pools and water tanks VitrA Fix PROOF, full flexible water proofing materail is recommended. Do not expose to UV and direct sun light.
Display: (20 kg powder) A, (6,25 lt liquid) B = 26,25 kg setConsumption: 1,5 kg/mm/m2 (min. 1,5 mm required)
F41300005 TRANSPARENT 5 lt 10,40 52,00
F41209510 GREEN 10 kg 5,31 53,10
F41101025 GREY 26,25 kg20 kg powder
+6,25 lt liquid
SET 50,00
2015/1
14
WATER PROOFING MATERIALS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
PROOFWater proofing material with two componentsThe cement based water proofing material under ceramic or similar covering well adapted for walls and floors which are exposed to dampness of water. It is available for application on gypsium plasters components, mortar, plas-terboard pannels. Before fixing tiles apply VitrA Fix PROOF at least 2 layers to provide a water proofing surface. It is also suitable for swimming pools.
Tile applications should be done after the surface is sealed by VitrA Fix PROOF.
Display: (25 kg powder) A, (12,5 lt liquid) B = 37,5 kg setConsumption: 1,5 kg/m2 for 1 mm thickness (min. 1,5 mm)
F41101001 GREY 37,5 kg25 kg powder
+12,5 lt liquid
2,00 75,00
F41901025F41903025F41901006F41903006
GREYWHITEGREYWHITE
25 kg25 kg6 kg6 kg
13,0013,0015,0015,00
325,00325,0090,0090,00
F90101812 WHITE 1,5 x 50 m 12,00 360,00
One component, UV resistant, liquid membrane for waterproofing & protectionOne component, low viskosity polyurethane fluid that cures with the hu-midity in the atmosphere. It produces an elastic strong film with excellent adhesion to different surfaces. Apply with brush, roller or airless in one or two coats.
Display: 25 and 6 kg metal cansConsumption: 1,50-2,00 kg/m2 (Changes according to surface porosity)
PU PROOF
WATERPROOFING AUXILIARY MATERIALSPRODUCT CODE PACKAGE PRODUCT PRICE
(EURO/m2 - EURO/mtl)PRODUCT PRICE
(EURO)
WATERPROOFING TEXTILE MEMBRANEPolyurethane polyproplen water proofingtextile membrane with water vapor permeabilityPolyurethane polyproplen based textile membrane for water proofing of bathrooms, showers, olympic,public or private pools, kitchens, balconies and terraces where they are submerged with water. Easy to install as an water proofing membrane under porcelain, pool or floor tiles, natural marble and granite, self levelling screed or traditional mortars or renders.
Display: 1,5 x 50 m
ELASTOMERIC TAPE
BUTYL TAPE
THERMOPLASTIC DILATATION TAPE
F90101808 12 cm - 50 mtl 2,80 140,00
F90101809 12 cm - 25 mtl 4,10 102,50
F90101806F90101807
16 cm - 30 mtl24 cm - 30 mtl
12,0017,40
360,00522,00
2015/1
15
FLOORING PRODUCTS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
F42301025 GREY 25 kg 0,76 19,00
F42101025 GREY 25 kg 1,00 25,00
F42501025 GREY 25 kg 0,44 11,00
S 10 (3-10 mm thickness)
Self levelling compoundFor levelling and smoothing out uneven substrates, application thickness 3 to 10 mm. suitable for use under seramic and other types of coverings it is suitable for concrete slaps and cement mortar screeds etc. VitrA Fix S10 can be used areas such as school, offices, hospitals, apartments. Not suit-able for permanetly damp rooms or floors and exterior areas. According to weather conditions, setting time changes between 12-24 hours.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg) Consumption: 1,5-2 kg/m2
S 30 (4-30 mm thickness)
Self levelling compoundVitrA Fix S30 is suitable for all public and private premises where heavy traffic is requiring a finish covering such as ceramic tiles, carpets, plastic tiles or coverings, wooden flooring and their suitable adhesives. Thickness from 4 mm. to 30 mm. interior floor applications available on old tiles, spe-cial floor paints, asphalt bases, particle board flooring, wooden, parquet flooring, cement mortar screed, concrete etc. It contains fiber for crack-less application. According to weather conditions, setting time changes between 6-8 hours.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 1,5-2 kg/m2
F 50 (10-50 mm thickness)
Dry mortar (10-50 mm)Cement based dry mortar for uneven surfaces where 10-50 mm of thickness required. It is suitable for underlying ceramic tiles, natural marble&stones, wood coverings and also for carpets. It is an alternative product for con-ventional cement based mortars for floors. Water ratio is written back of package and technical data sheets and should be obeyed to get the high est performance. Standart or flexible cement based tile adhesives can be used for fixing tiles immediately on F 50 application without waiting for setting time. For more technical information please consult technical assistance.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg) Consumption: 1,5 kg/mm/m2
2015/1
16
SEALANTS PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
SM 610
SM 810
F51100001F51103001F51100002F51103002
TRANSPARENTWHITETRANSPARENTWHITE
310 ml310 ml
280 ml280 ml
3,503,503,103,10
87,5087,5077,5077,50
F51300001F51303001F51300002F51303002
TRANSPARENTWHITETRANSPARENTWHITE
310 ml310 ml
280 ml280 ml
4,804,804,404,40
120,00120,00110,00110,00
F51801002F51803002F51806002
GREYWHITEBLACK
600 ml600 ml600 ml
13,0013,0013,00
13,0013,0013,00
F49701001 GREY 375 ml 25,00 25,00
F49702001 21,00 21,00
Acetic antibacterial silicone sealantVitrA Fix SM 610 is one part, acid curing silicone sealent for general pur-pose sealing in do it your self applications. Good adhesive strength on glass, vitrified surfaces, ceramic tiles, many plastic and most paint. VitrA Fix SM 610 should not be used on substrates such as marble, concrete, fibrous ce-ment and mortar, as the product realeases acetic and during vulcanization.
Display: 310 and 280 ml cartridge, 25 pcs/boxConsumption: 10-12 Lmt / 310 ml cartridge
Neutral-antibacterial silicone sealantVitrA Fix SM 810 is one part, neutral curing silicone sealant with excellent adhesion and long shelf life. Excellent adhesion on tile ceramic glass, con-crete, masonry,aliminium, metal, wood, PVC. For sealing joints of sanitary, ceramic, tile, window, door. etc. And for filling small cracks and joins. It is suitable for fixing mirrors and tiles on wall. It is non-corossive. It has high resistance to UV. and strong weather conditions. It is suitable for all kinds of DIY applications (houses, boats, cars, caravans etc.)
Display: 310 and 280 ml cartridge, 25 pcs/boxConsumption: 10-12 Lmt / 310 ml cartridge
Thixotropic polyurethane sealant for horizontal & vertical jointsOne component polyurethane sealant that cures with the humidity to forma though but highly elastic sealant of low modulus. High elastic - Shore A: 25
Display: 600 ml sausagesConsumption: 100-150 mtl/sausage (Depending on the width & depth of the expansion joints)
PU SEALANT
Epoxy based, thixotropic, fast curing fixing mortarTwo component, solvent free, non-sag, epoxy, easy to use anchorage and fixing mortar.
Display: 375 ml cartridgeConsumption: 0,250-0,500 ml/hole1 box = 20 pieces
ANCHOR 2C
Application gun.
ANCHOR 2C GUN
2015/1
17
REPAIR MORTARS andRESTORATION PLASTERS PRODUCT
CODE COLOUR PACKAGEPRODUCT PRICE
(EURO/kg)PRODUCT PRICE
(EURO)
RM 20 (5-20 mm thickness)
RM 27 (2-7 mm thickness)
RM FLAT (0-3 mm thickness)
F61101025 GREY 25 kg 0,60 15,00
F61201025F61203025
GREYWHITE
25 kg25 kg
0,350,45
8,7511,25
F61303025 WHITE 25 kg 0,60 15,00
Surface smoothing & repairing mortar up to 5-20 mmCement based, polymer modified, coarse grained, specially formulated surface smoothing and repairing mortar up to 5- 20 mm. Easy application on concrete an cement based plasters or mortars and brickworks on walls. VitrA Fix LATEX can be mixed with 1/3 of water content of VitrA Fix RM 20 to increase the product flexiblity, physical and mechanical performance. Any wall coatings can be applied on VitrA Fix RM 20 after setting time is finished. Application on gypsium or cement based chip boards is not al-lowed.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg) Consumption: 1,5 kg/mm/m2
Surface smoothing and repairing mortarCement based, concrete smoothing mortar from 2 up to 7 mm. thickness. It is suitable for cement mortar finishing coats, concrete, brickwork etc. Af-ter VitrA Fix RM 27 application, paint or decorative paints can be applied. VitrA Fix LATEX can be added into the mixture to give more flexibility and high adhesion beetween the surfaces. Not suitable for wood, plaster, fibre cement, cellular concrete and gypsum surfaces.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg) Consumption: 1,5 kg/mm/m2
Surface smoothing plasterCement based surface smoothing plaster with mineral based filling materi-als, and special binders. Easy application on concrete surfaces and cement based mortars. Do not apply on: wood, timber, cement based boards. Be-fore the application on pre-cast concrete panel and gypsum boards, contact with producer. It’s applied for thickness up to 2 mm using a plain trowel. Decorative paints and plasters that get along well with cement based prod-ucts can be applied on it.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 1,2 kg/m2 for 1 mm thickness
2015/1
18
APPLICATION TOOLS PRODUCT CODE SPECIFICATIONS
PRODUCT PRICE (EURO)
F90100205
F90101813
F90101817
F90101810
F90101811
F90100524
F90100486
F90100128
F90100434
F90100222
F90100452
F90100412
F90100462
F90100122
F90100472
F90100470
F90100474
F90100190
F90100192
F90100180
F90100200
F90100201
F90100081
F90101801
F90101814
F90101802
F90101804
F90101805
F90101815
F90101816
F90100702
F90100703
F90100704
F90100705
Trapezoidal Trowel, Soft Handle, 35 cm Stainless Steel
Scraper Float 25 cm
Punch
Internal Waterproofing Tape - 12 cm
External Waterproofing Tape - 12 cm
Plastic Tile Trowel, Aluminium Handle 30 cm Stainless Steel
Marble Tile Trowel, Soft Handle, 50 cm Stainless Steel
Notched Trowel, Soft Handle, 6x6, 30 cm Stainless Steel
Notched Trowel, Soft Handle, 8x8, 40 cm Stainless Steel
Notched Trowel, Wooden Handle, 8x8, 50 cm Stainless Steel
Notched Trowel, Wooden Handle, 10x10, 40 cm Stainless Steel
Notched Trowel, Soft Handle, 10x10, 50 cm Stainless Steel
Notched Trowel, Wooden Handle, V Notched, 40 cm Stainless Steel
Notched Spreader, 6x6, 17 cm Stainless Steel
Notched Spreader, 8x8, 17 cm Stainless Steel
Notched Spreader, 10x10, 17 cm Stainless Steel
V Notched Spreader, 17 cm Stainless Steel
Grouting Trowel, Short, 28x14 cm
Grouting Trowel, Long, 11x38 cm
Sponge Trowel 16x30 cm
Epoxy Trowel 13x27 cm
Epoxy Cleaning Pads, Double 13x27 cm
Plaster Hod 35 lt 65x43 cm
Plastic Tray 25 lt
Tiler Tool Set
Knee Patch
Plastic Hammer 700 gr
Epoxy Grouting Trowel
Spiked Roller
Spiked Boot
2 MM Tile Spacer (Perforated) (500 pcs)
3 MM Tile Spacer (Closed) (500 pcs)
4 MM Tile Spacer (Perforated) (500 pcs)
5 MM Tile Spacer (Perforated) (500 pcs)
8,70
7,60
16,20
4,76
4,76
8,70
10,00
8,00
9,50
10,00
9,50
10,00
9,50
4,77
4,77
4,77
4,77
7,32
7,70
6,16
10,47
9,30
11,63
38,20
69,30
5,10
7,24
11,00
12,00
34,65
3,15
5,10
5,55
7,77
Notched Trowel* Stainless Steel
F90100434F90100412
Notched Trowel* Stainless Steel
F90100128
Notched Trowel* Stainless Steel
F90100222F90100452
Notched Trowel* Stainless Steel
F90100462
Marble Tile Trowel* Stainless Steel
F90100486
Plastic Tile Trowel* Stainless Steel
F90100524
Notched Spreader* Stainless Steel
F90100122F90100472F90100470F90100474
Trapezoidal Trowel* Stainless Steel
F90100205
Grouting TrowelF90100190F90100192
Sponge TrowelF90100180
Epoxy Cleaning Pads & TrowelF90100200F90100201
Epoxy Grouting TrowelF90101805
Scraper FloatF90101813
Internal Waterproofing TapeF90101810
External Waterproofing TapeF90101811
Plaster HodF90100081
Tiler Tool SetF90101814
Knee PatchF90101802
Spiked BootF90100816
Tile Spacer (500 pcs)F90100702F90100703F90100704F90100705F90100707
PunchF90101817
Spiked RollerF90100815
Plastic HammerF90101804
2015/1
19
EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM
Adhesives for Thermal Insulation Boards PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
Thermal Insulation Boards PRODUCT CODE PRODUCT SPECIFICATION PACKAGE UNIT
UNIT PRICE (EURO)
Cement based adhesive for thermal insulation boardsVitrA Therm VT 500 is a high performance cement based adhesive which is used to fix all kinds (EPS, XPS, LAMPDOPOR and ROCKWOOL) of thermal insulation boards on all categories of concrete and masonary. It is resistant to thermal shocks and moisture.Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg) Consumption: The valuse changes according to site conditions. For EPS and XPS boards 4-5 kg/m2, for mineral wools 5-6 kg/m2
Acrylic dispersion based ready mixed adhesiveVitrA Therm VT 550 is a high performance acrylic dispersion based ready mixed adhesive which is used to fix all kinds (EPS, XPS, LAMPDOPOR and ROCKWOOL) of thermal insulation boards, particularly on wood, gypsum and alike surfaces. It is resistant to thermal shocks and moisture and suit-able for use in interior and exterior applications. Display: 15 kg plastic cans Consumption: The value changes according to the site conditions. Approximate consumption amount is 3-4 kg/m2
F14101025 GREY 25 kg 0,35 8,75
F17303015 WHITE 15 kg 2,17 32,55
VT 500
VT 550
VT EPSExpanded Polystyrene Thermal Insulation Board (density = 16 kg/m3). It is a B1 Fire Class product according to DIN 4102. Thermal Conductivity of EPS is 0,039 W/mK. Provides thermal insulation.
VT LAMPDOPORExpanded Polystyrene Thermal Insulation Board improved with Grafit (density = 16 kg/m3). It is a B1 Fire Class product according to DIN 4102. Thermal Conduc-tivity of LAMPDOPOR is 0,032 W/mK. Provides thermal insulation.
VT XPSExtruded Polystyrene Thermal Insulation Board. It is a B1 Fire Class product according to DIN 4102. Thermal Conductivity of XPS is 0,035 W/mK. Provides thermal insulation.
VT ROCKWOOLRockwool exterior coating board. It is a A1 Fire Class product according to DIN 4102. Thermal Conductivity of ROCKWOOL is 0,039 W/mK. Provides thermal, sound and fire insulation.
F95101002F95101003F95102104F95101005F95101006F95101007F95101008F95101010F95101012F95101014
VT EPS Thickness 2 cmVT EPS Thickness 3 cmVT EPS Thickness 4 cmVT EPS Thickness 5 cmVT EPS Thickness 6 cmVT EPS Thickness 7 cmVT EPS Thickness 8 cmVT EPS Thickness 10 cmVT EPS Thickness 12 cmVT EPS Thickness 14 cm
24 pcs, 12 m2
16 pcs, 8 m2
12 pcs, 6 m2
10 pcs, 5 m2
8 pcs, 4 m2
7 pcs, 3,5 m2
6 pcs, 3 m2
5 pcs, 2,5 m2
4 pcs, 2 m2
3 pcs, 1,5 m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
2,093,12
5,206,237,288,314,179,5611,4613,39
F95103002F95103003F95103004F95103005F95103006F95103007F95103008F95103010F95103012F95103014
VT LAMPDOPOR Thickness 2 cmVT LAMPDOPOR Thickness 3 cmVT LAMPDOPOR Thickness 4 cmVT LAMPDOPOR Thickness 5 cmVT LAMPDOPOR Thickness 6 cmVT LAMPDOPOR Thickness 7 cmVT LAMPDOPOR Thickness 8 cmVT LAMPDOPOR Thickness 10 cmVT LAMPDOPOR Thickness 12 cmVT LAMPDOPOR Thickness 14 cm
24 pcs, 12 m2
16 pcs, 8 m2
12 pcs, 6 m2
10 pcs, 5 m2
8 pcs, 4 m2
7 pcs, 3,5 m2
6 pcs, 3 m2
5 pcs, 2,5 m2
4 pcs, 2 m2
3 pcs, 1,5 m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
2,503,75
4,996,237,498,739,9811,0113,2315,4
F95104002F95104003F95104004F95104005F95104006F95104007F95104008F95104010F95104012
VT XPS Thickness 2 cmVT XPS Thickness 3 cmVT XPS Thickness 4 cmVT XPS Thickness 5 cmVT XPS Thickness 6 cmVT XPS Thickness 7 cmVT XPS Thickness 8 cmVT XPS Thickness 10 cmVT XPS Thickness 12 cm
20 pcs, 15 m2
14 pcs, 10,5 m2
10 pcs, 7,5 m2
8 pcs, 6 m2
7 pcs, 5,25 m2
6 pcs, 4,5 m2
5 pcs, 3,75 m2
4 pcs, 3 m2
3 pcs, 2,25 m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
3,965,837,749,77
11,6413,51
15,4720,1424,20
F95105003F95105004F95105005F95105006F95105007F95105008F95105010F95105012
VT ROCKWOOL Thickness 3 cmVT ROCKWOOL Thickness 4 cmVT ROCKWOOL Thickness 5 cmVT ROCKWOOL Thickness 6 cmVT ROCKWOOL Thickness 7 cmVT ROCKWOOL Thickness 8 cmVT ROCKWOOL Thickness 10 cmVT ROCKWOOL Thickness 12 cm
5 pcs, 3,60 m2
4 pcs, 2,88 m2
3 pcs, 2,16 m2
3 pcs, 2,16 m2
2 pcs, 1,44 m2
2 pcs, 1,44 m2
2 pcs, 1,44 m2
1 pcs, 0,72 m2
m2
m2
m2
m2
m2
m2
m2
m2
10,4013,9317,38
20,8224,3227,8229,9235,87
2015/1
20
EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM
Base Coat Render for Thermal Insulation Boards PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
Anchor for Fixing of Thermal Insulation Boards PRODUCT CODE PRODUCT SPECIFICATION PACKAGE UNIT
UNIT PRICE (EURO)
VT 600Cement based base coat render for insulation boardsVitrA Therm VT 600 is an easy-to-apply cement based base coat render which is applied over all kinds (EPS, XPS, LAMPDOPOR and ROCKWOOL) of thermal insulation boards. It is resistant to thermal shocks and moisture. VitrA Therm VT 600 has an easy and crackless application both on internal and external walls.Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: The valuse changes according to site conditions. For EPS and XPS boards 4-5 kg/m2, for mineral wools 5-6 kg/m2
F63101025 GREY 25 kg 0,48 12,00
Nail-in cap anchor with plastic nailUsed for mechanical fixing of thermal insulation boards to concrete, bricks and honeycomb blocks. Pre-mounted nail ensures quick and easy instal-lation.
Mechanical nail-in cap anchor with plastic nailUsed for mechanical fixing of thermal insulation boards to concrete, bricks and honeycomb blocks. Pre-mounted nail ensures quick and easy instal-lation.
Wide headed nail-in cap anchor with plastic nailUsed for mechanical fixing of thermal insulation boards to concrete, bricks and honeycomb blocks. Pre-mounted nail ensures quick and easy instal-lation.
Nail-in cap anchor with steel nailUsed for mechanical fixing of thermal insulation boards to concrete, bricks and honeycomb blocks. Pre-mounted nail ensures quick and easy installa-tion. Recommended in applications with ROCKWOOL.
Screw-in cap anchor for concrete and masonryUsed for mechanical fixing of thermal insulation boards on all categories of concrete, solid and perforated masonry, lightweight aggregate and gas con-crete. Pre-mounted screw ensures quick and easy installation. Additional caps and installable plugs allow homogeneous plain surfaces and even ren-dering - quick and milling dust.
Screw-in cap anchor for wood and metal sheetsUsed for mechanical fixing of thermal insulation boards on wood fibre-boards, chipboards, gypsum fibreboards, OSB plates, solid wood plates and metal sheets.
F95201095F95201115F95201135F95201155
VTP95 - 95 mm (For insulation boards with thickness 2-3-4 cm)VTP115 - 115 mm (For insulation boards with thickness 5-6 cm)VTP135 - 135 mm (For insulation boards with thickness 7-8 cm)VTP155 - 155 mm (For insulation boards with thickness 9-10 cm)
500 pcs500 pcs500 pcs500 pcs
pcspcspcspcs
0,170,18
0,200,24
F95205095F95205115F95205135F95205180F95205200F95205220F95205240
VTPMT95 - 95 mm (For insulation boards with thickness 2-3-4 cm)VTPMT115 - 115 mm (For insulation boards with thickness 5-6 cm)VTPMT135 - 135 mm (For insulation boards with thickness 7-8 cm)VTPMT180 - 180 mm (For insulation boards with thickness 9 cm)VTPMT200 - 200 mm (For insulation boards with thickness 10 cm)VTPMT220 - 220 mm (For insulation boards with thickness 12 cm)VTPMT240 - 240 mm (For insulation boards with thickness 14 cm)
500 pcs500 pcs500 pcs500 pcs500 pcs500 pcs500 pcs
pcspcspcspcspcspcspcs
0,170,18
0,200,250,300,330,46
F95206095F95206115F95206135F95206155F95206175F95206195
VTPGB95 - 95 mm (For insulation boards with thickness 2-3-4 cm)VTPGB115 - 115 mm (For insulation boards with thickness 5-6 cm)VTPGB135 - 135 mm (For insulation boards with thickness 7-8 cm)VTPGB155 - 155 mm (For insulation boards with thickness 9-10 cm)VTPGB175 - 175 mm (For insulation boards with thickness 11-12 cm)VTPGB195 - 195 mm (For insulation boards with thickness 13-14 cm)
500 pcs500 pcs500 pcs500 pcs500 pcs500 pcs
pcspcspcspcspcspcs
0,120,120,140,170,320,40
F95202095F95202115F95102135F95202155F95202180F95202200
VTC95 - 95 mm (For insulation boards with thickness 2-3-4 cm)VTC115 - 115 mm (For insulation boards with thickness 5-6 cm)VTC135 - 135 mm (For insulation boards with thickness 7-8 cm)VTC155 - 155 mm (For insulation boards with thickness 9-10 cm)VTC180 - 180 mm (For insulation boards with thickness 12 cm)VTC200 - 200 mm (For insulation boards with thickness 14 cm)
500 pcs500 pcs500 pcs500 pcs500 pcs500 pcs
pcspcspcspcspcspcs
0,380,400,420,440,650,84
F95204115F95204135F95204155F95204175F95204010F95204011F95204013
VTMP115 - 115 mm (For insulation boards with thickness 5-8 cm)VTMP135 - 135 mm (For insulation boards with thickness 8-10 cm)VTMP155 - 155 mm (For insulation boards with thickness 10-12 cm)VTMP175 - 175 mm (For insulation boards with thickness 12-14 cm)VTMPR-T Rockwool Cap (Rondela)VTMPR-E EPS Cap (Rondela)VTMPF-E EPS Plug
500 pcs500 pcs500 pcs500 pcs500 pcs500 pcs500 pcs
pcspcspcspcspcspcspcs
0,930,961,211,21
0,250,200,09
F95203040F95203050F95203070F95203090F95203110F95203130
VTV40 - 40 mm (For insulation boards with thickness 2-3 cm)VTV50 - 50 mm (For insulation boards with thickness 4-5 cm)VTV70 - 70 mm (For insulation boards with thickness 6-7 cm)VTV90 - 90 mm (For insulation boards with thickness 8-9 cm)VTV110 - 110 mm (For insulation boards with thickness 10-11 cm)VTV130 - 130mm (For insulation boards with thickness 12-13 cm)
500 pcs500 pcs500 pcs500 pcs500 pcs500 pcs
pcspcspcspcspcspcs
0,220,250,220,300,370,96
2015/1
21
EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM
Additional Plates PRODUCT CODE PRODUCT SPECIFICATION PACKAGE UNIT
UNIT PRICE (EURO)
F95205090F95205140
VTD 90 Additional PlateVTD 140 Additional Plate
500 pcs500 pcs
pcspcs
0,631,13
F95204001F95204002F95204003F95204004
F95204005
F95204006
VTAP Aluminium Corner ProfileVTPVC-F PVC Corner Profile reinfoced with mesh (10x10 cm)VTAAKP Angular Aluminium Profile (135°)VTPL-F Fileli Polistrol Corner Profile reinforced with mesh (10x10 cm)VTPVC-H Angular PVC Corner Profile reinforced with mesh (10x10 cm)VTDP-F PVC Nosing Profile with Reinforcement Mesh
2,50 mt x 50 pcs2,50 mt x 50 pcs2,50 mt x 50 pcs
2,50 mt x 50 pcs
50 mt / 1 roll2,50 mt x 10 pcs
mmm
m
mm
1,170,700,91
1,25
1,183,75
F95205101
F95205102
VTDF 160 gr/m2, an alkali resistant reinforcementmesh with square dimensions of 4 x 4 mmVTPF 300 gr/m2, an alkali resistant reinforcementmesh with square dimensions of 4 x 7 mm
50 m2
50 m2
m2
m2
1,40
3,63
F95001003F95001004F95001005F95001006F95001007F95001008F95001010F95001012F95001014F95001080
VTSP3 - For insulation boards with thickness 3 cm VTSP4 - For insulation boards with thickness 4 cm VTSP5 - For insulation boards with thickness 5 cm VTSP6 - For insulation boards with thickness 6 cm VTSP7 - For insulation boards with thickness 7 cm VTSP8 - For insulation boards with thickness 8 cmVTSP10 - For insulation boards with thickness 10 cm VTSP12 - For insulation boards with thickness 12 cm VTSP14 - For insulation boards with thickness 14 cm VTMS - Aluminium starter profile fixing kit
2,50 mt x 10 pcs2,50 mt x 10 pcs2,50 mt x 10 pcs2,50 mt x 10 pcs2,50 mt x 10 pcs2,50 mt x 10 pcs2,50 mt x 10 pcs2,50 mt x 10 pcs2,50 mt x 10 pcs
100 pcs in box
mmmmmmmmm
box
2,102,422,753,054,124,125,17
5,225,74
27,03
F95401001F95401002F95401003F95401004F95401005F95401006F95401007F95401008F95401009F95401010
VTDP Aluminium Nosing ProfileVTGDP3 Expansion Joint Profile with Rubber - 3 cm.VTGDP5 - Expansion Joint Profile with Rubber - 5 cm.VTWSF PVC Window Edge Profile Reinforced with Mesh VTPT3 Plastic Plug 3 mm. (used while fixing aluminium starter profile)VTPT5 Plastic Plug 5 mm. (used while fixing aluminium starter profile)VTPT8 Plastic Plug 8 mm. (used while fixing aluminium starter profile)VTPT10 Plastic Plug 10 mm. (used while fixing aluminium starter profile)VTWDP Window Sill ProfileVTYB Thermal Insulation Band
2,50 mt x 50 pcs2,50 mt x 25 pcs2,50 mt x 25 pcs2,60 mt x 50 pcs
2000 pcs2000 pcs2000 pcs2000 pcs
3,00 mt x 25 pcs2 mm x 15 mm x 12,50 mt x 15 pcs
mmmm
pcspcspcspcsmm
4,9910,7810,782,620,050,060,070,08
1,7512,25
Corner Profiles
Reinforcement Mesh
Aluminium Starter Profiles
Plate diameter of the cap anchor is enlarged through spesifically matched additional plates to perfectly fit to the demands of different insulation materials. Recommended for ROCKWOOL applications for a better fixing performance.
Special Accessories
2015/1
22
EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM
Decorative Coatings and Paints PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
F63503025 WHITE 25 kg 0,75 18,75
F63203025 WHITE 25 kg 0,80 20,00
F63303025 WHITE 25 kg 0,85 21,25
VT 700 FINE
Cement based thin decorative final coatingVitrA Therm VT 700 FINE is cement based, easy-to-apply, thin textured decorative coating. It is resistant to thermal shocks and moisture.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 1,8-2 kg/m2 for 1-1,5 mm thickness
VT 750 K
Cement based thick decorative final coatingVitrA Therm VT 750 K is cement based, easy-to-apply, thick textured deco-rative coating. It is resistant to thermal shocks and moisture.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 4-5 kg/m2 for 2-2,5 mm thickness
VT 700
Cement based decorative final coatingVitrA Therm VT 700 is cement based, easy-to-apply, textured decorative coating. It is resistant to thermal shocks and moisture.
Display: 25 kg kraft sacks (80x110x100 cm pallets - 48 sacks - Total 1200 kg)Consumption: 2,8-3 kg/m2 for 1,5-2 mm thickness
2015/1
23
F63600015 WHITE 15 lt 4,09 61,35
F63507025 Prices are validfor colours ofVitrA Thermcolour chart.
25 kg 2,97 74,25
F63608015 Prices are validfor colours ofVitrA Thermcolour chart.
15 lt 7,22 108,30
F63603015 Prices are validfor colours ofVitrA Thermcolour chart.
15 lt 5,60 84,00
VT 800 GREN
Silicone grained exterior paintAcrylic copolymer emulsion based, texture applicable, one coat application, matte top coat grained exterior surface product containing silicone which is applied with roller brush and does not require a topcoat.
Display: 25 kg PE bucket (33 cans - Total 825 kg)Consumption: 500-1200 g/m2 according to texture desired. A controlled sample work should be carried out for precise consumption calculation.
EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM
Decorative Coatings and Paints PRODUCT CODE COLOUR PACKAGE
PRODUCT PRICE (EURO/kg)
PRODUCT PRICE (EURO)
VT 800 PRIMER
Exterior primerSilicone emulsion based, pigmented exterior surface paint primer with high strength of adherence.
Display: 15 lt (33 cans - Total 762,30 kg)Consumption: 7-11 m2/L for one coat according to smoothness and absor-bency of surface; however, a controlled sample work should be carried out for precise consumption calculation.
VT 800 SLK
Silicone based exterior paintAcrylic copolymer emulsion based, matte, top coat exterior surface paint with silicone.
Display: 15 lt (33 cans - Total 762,30 kg)Consumption: 6-10 m2/L for one coat according to absorbency and smoothness of surface; however, a controlled sample work should be car-ried out for precise consumption calculation.
VT 800 AKR
Acrylic based exterior paintA white, matte, top coat exterior surface paint which is acrylic copolymer emulsion based, qualified with water insulation and developed with pig-ment and filling system.
Display: 15 lt (33 cans - Total 762,30 kg)Consumption: 6-10 m2/L for one coat according to absorbency and smoothness of surface; however, a controlled sample work should be car-ried out for precise consumption calculation.
ARE
AS
OF
USE
WATERPROOFING MATERIALSHYDROSIL HYDROSTOP PROOF HG PROOF S PROOF
APP
LIC
ATI
ON
ARE
A
DRINKABLE WATER TANK
WATER TANK
WET AREA & BATHROOM
KITCHEN
TURKISH BATH & SAUNA
TERRACE
BOUTIQUE POOL
THERMAL POOL
SWIMMING POOL
EXTERNAL FAÇADE
GARDEN WALLS
AREA < 300 m2
AREA > 300 m2
GROUTING MATERIALS1-6 MM FLEX 0-3 MM FLEX 3-10 MM POOL G 2-10 MM RUSTIK 3-20 MM EPOXY
TILE
FO
RMA
T
CERAMIC TILE (FOR WALLS)
CERAMIC TILE (FOR FLOORS)
PORCELAIN TILE
GLASS TILE / MOSAIC
GRANITE TILE
MARBLE & NATURAL STONE
POOL TILE
METAL TILE
APP
LIC
ATI
ON
ARE
A
JOINT WIDTH 1-6 mm 0-3 mm 3-10 mm 2-10 mm 3-20 mm 3-15 mm
INTERIOR (FLOORS & WALLS)
EXTERIOR (FLOORS & WALLS)
WET AREA & BATHROOM
KITCHEN
TURKISH BATH & SAUNA
WALK WAY & GARDEN WALLS
TERRACE
PARKING AREA
INDUSTRIAL AREA & FLOORS
INDUSTRIAL KITCHEN
SHOPPING CENTER
HOSPITAL
BOUTIQUE POOL
THERMAL POOL
SWIMMING POOL
FLEXIBLE FLOORS (WOODEN & STEEL CONSTRUCTION)
LABORATORY
FOOD FACTORY
Applicable. VitrA Fix LATEX performance improving additive should be added into the grouting material.
Applicable.
MARBLE & STONE SELECT
FLEX RAPID RAPID SETFLOOR PLUS
ULTRA SYSTEM
HP
< 30x60 cm* ≤ 33x33 cm ≤ 60x60 cm < 30x60 cm
< 30x60 cm* ≤ 33x33 cm < 30x60 cm* ≤ 60x60 cm < 30x60 cm
< 30x60 cm* < 30x60 cm* ≤ 60x60 cm < 30x60 cm
< 30x60 cm* ≤ 60x60 cm < 30x60 cm
< 30x60 cm* < 30x60 cm* ≤ 60x60 cm
≤ 60x60 cm < 30x60 cm* < 30x60 cm* ≤ 60x60 cm
≤ 60x120 cm ≤ 60x60 cm < 30x60 cm
≤ 60x60 cm
ARE
AS
OF
USE
TILE ADHESIVE
FIXER COTTO FLEXYFLEX
PORSELENPOOL
MARBLE & STONE
TILE
FO
RMA
TCERAMIC TILE (FOR WALLS) ≤ 33x33 cm ≤ 33x33 cm < 30x60 cm* < 30x60 cm*
CERAMIC TILE (FOR FLOORS) ≤ 33x33 cm < 30x60 cm* ≤ 33x33 cm < 30x60 cm* < 30x60 cm*
PORCELAIN TILE ≤ 33x33 cm < 30x60 cm* < 30x60 cm*
GLASS TILE / MOSAIC ≤ 33x33 cm < 30x60 cm* < 30x60 cm*
GRANITE TILE < 30x60 cm* ≤ 33x33 cm < 30x60 cm* < 30x60 cm*
MARBLE & NATURAL STONE < 30x60 cm* ≤ 33x33 cm < 30x60 cm* < 30x60 cm* ≤ 33x33 cm
THERMAL INSULATION BOARD ≤ 60x120 cm ≤ 60x120 cm
POOL TILE < 30x60 cm*
APP
LIC
ATI
ON
ARE
A
INTERIORFLOORS
WALLS
EXTORIORFLOORS
WALLS
WET AREA & BATHROOM
KITCHEN
TURKISH BATH & SAUNA
UNDER FLOOR HEATED SYSTEM
WALK WAY
TERRACE
PARKING AREA
INDUSTRIAL AREA & FLOORS
SHOPPING CENTER
HOSPITAL
BOUTIQUE POOL
THERMAL POOL
SWIMMING POOL
SUB
STRA
TE
EXISTING TILE
GYPSUM (PANNEL & PLASTERS & BLOCK)
CONCRETE
TIMBER (OSB & CHIPBOARD)
CEMENTITOUS CHIPBOARDS
LIME BASED PLASTER
CEMENT BASED SCREED
CEMENT BASED PLASTER
RIGIT ACRYLIC BASED PAINT
Applicable. Substrate should be primed with VitrA Fix FILM adhesion primer.
Substrate should be primed with VitrA Fix FILM PLUS high performance adhesion primer. VitrA Fix LATEX performance improving additive should be added into the adhesive.
< 30x60 cm* Applicable for tile sizes ≤ 60 x 60 cm when VitrA Fix LATEX performance improving additive is added into the adhesive.
ExportE5 Karayolu Üzeri Şifa Mah. Atatürk Cad. Tuzla 34941 İstanbul / TURKEYPhone: +90.216.423 34 33 (Pbx) • Fax: +90.216.423 50 02
Intema (Head Office)Büyükdere Cad. Ali Kaya Sokak No: 7 Levent 34394, İstanbul / TURKEYPhone: +90.212.350 80 00 • Fax: +90.212.350 84 45
VitrA Tiles (Ireland) Ltd. Sales DepartmentArklow Business Park Ballynattin Arklow Co. Wicklow, IRELANDPhone: +353 (0) 402 26 500 • Fax: +353 (0) 402 91 355
Arklow ShowroomIDA Business Park Ballynattin, Arklow Co. Wicklow / IRELANDPhone: +353 402 26 500 • Fax: +353 402 91 355
VitrA RussiaTaganskaya Str. 31/22 109147 Moscow, RUSSIAPhone: +7 495 232 35 48 • Fax: +7 495 232 35 48
Moscow ShowroomTaganskaya Str. 31/22 109147 Moscow, RUSSIAPhone: +7 495 232 35 48 • Fax: +7 495 232 35 48
VitrA USAShawnee North Business Center 305 Shawnee North Drive Suite 600 City of Suwanne USAPhone: +1 678 376 07 55 • Fax: +1 678 376 74 14
Atlanta ShowroomShawnee North Business Center 305 Shawnee North Drive Suite 600 City of Suwanne USAPhone: +1 678 376 07 55 • Fax : +1 678 376 74 14
İntema CaddebostanBağdat Cad. Rıfat Bey Sok. Güngören Apt. No: 2 Caddebostan - İstanbul / TURKEYPhone: +90.216.467 41 72 - 467 41 75 • Fax: +90.216.357 36 23
İntema AnkaraTuran Güneş Blv. No: 86 Yıldız, Çankaya - Ankara / TURKEYPhone: +90.312.439 46 01 • Fax: +90.312.440 94 50
koramic.com.tr/envitrafix.com.tr