2015 SLI MiniCate 140909a - surveillance-video.comEV-6680-N3WQ Programmable, motion-activated LED,...

2

WDR Off WDR On

3D-NR On3D-NR Off

EV-2726-N3GQ 3.6mm, 24 IR LEDs, Gray

EV-2726-N3WQ 3.6mm, 24 IR LEDs, White

EV-2726-NFGQ 2.8~12mm, 36 IR LEDs, Gray

EV-2726-NFWQ 2.8~12mm, 36 IR LEDs, White

EV-2866-NKGQ 2.8~12mm, 600 TVL

EV-2876-UKGQ 2.8~12mm, 690 TVL, 1⁄3” Pixim® WDR

EV-C2006-3G1Q 3.6mm, 700 TVL

EV-2646-NKGQ 2.8~12mm, 600 TVL

EV-2806-NMMQ 2.8~12mm, 600 TVL

EV-2221-N3BQ 3.6mm, 470 TVL

EV-2801-N3BQ 3.6mm, 540 TVL

EV-2221-NKBQ 2.8~11mm, 470 TVL

• 960H Resolution, 700 TV Lines• WDR (Wide Dynamic Range) for clear images in

strong backlight• 3D-NR (3D Digital Noise Reduction) for cleaner

images in low light• 1⁄3” Sony Super HAD II CCD • 12VDC• • IR LEDs for nighttime use• OSD (On-Screen Display) for programming• • 360° Triple-axis rotation• Heavy-duty vandal-resistant design• • Ceiling, wall-mount, conduit box, and conduit drop

brackets available

• 3D-NR (3D Digital Noise Reduction) for cleaner images in low light

• 33 IR LEDs for nighttime use• OSD (On-Screen Display) for

programming • 1⁄3” Sony Super HAD II CCD• Service monitor port for

convenient installation• • 360° Triple-axis rotation • 12VDC/24VAC• Heavy-duty vandal-resistant design• • • ® Seawolf sensor

• 1⁄3• 24 IR LEDs for nighttime use• • 360° Triple-axis rotation• 12VDC operation• Heavy-duty vandal-resistant design• • Ceiling, wall-mount, conduit box, and conduit drop

brackets available

• 600 TV Lines• 3D-NR (3D Digital Noise

Reduction for cleaner images in low light)

• 1⁄3” Sony Super HAD II CCD• 42 IR LEDs for nighttime use•

construction• 360° Triple-axis rotation • 12VDC/24VAC• Heavy-duty vandal-resistant design• •

• 600 TV Lines• 3D-NR (3D Digital Noise

Reduction) for cleaner images in low light

• 1⁄3” Sony Super HAD II CCD• 33 IR LEDs for nighttime use• Rugged, weatherproof

• 360° Triple-axis rotation • 12VDC or 24VAC• Heavy-duty vandal-resistant design• Includes black & white covers• •

• 1⁄3” Sony Super HAD II CCD•

range• Tamper-resistant design• Cables concealed in bracket• 12VDC operation

• 960H Resolution, 700 TV Lines• 1⁄3” Sony Super HAD II CCD• IR LEDs for nighttime use • 12VDC• • 360° Triple-axis rotation• Heavy-duty vandal-resistant design• • Ceiling, wall-mount, conduit box, and conduit drop

brackets available

EV-DWSGQSmall wall-mount bracket, gray

EV-DWLGQLarge wall-mount bracket, gray

EV-DWSWQSmall wall-mount bracket, white

EV-DWLWQLarge wall-mount bracket, white

EV-DCSGQSmall ceiling-mount bracket, gray

EV-DCLGQLarge ceiling-mount bracket, gray

EV-DCSWQSmall ceiling-mount bracket, white

EV-DCLWQLarge ceiling-mount bracket, white

EV-DSSGQSmall conduit box, gray

EV-DSLGQLarge conduit box, gray

EV-DSSWQSmall conduit box, white

EV-DSLWQLarge conduit box, white

EV-DDSGQSmall conduit drop bracket, gray

EV-DDLGQLarge conduit drop bracket, gray

EV-DDSWQSmall conduit drop bracket, white

EV-DDLWQLarge conduit drop bracket, white

EV-2706-N3GQ 3.6mm, 24 IR LEDs, Gray

EV-2706-N3WQ 3.6mm, 24 IR LEDs, White

EV-2706-NFGQ 2.8~12mm, 36 IR LEDs, Gray

EV-2706-NFWQ 2.8~12mm, 36 IR LEDs, White

3

EV-1806-N3GQ 3.6mm, 700 TVL EV-1606-N2SQ 2.9mm, 12 IR LEDs, 700 TVL

EV-1606-N3SQ 3.6mm, 24 IR LEDs, 700 TVL

EV-1665-N2BQ 2.2mm, 700 TVL

EV-1676-N2BQ 2.2mm, 700 TVL, IR

EV-1826-NKGAQ 2.8~12mm, 700 TVL

EV-1816-N6GQ 6mm, 700 TVL

EV-1816-NKGQ 2.8~12mm, 700 TVL

EV-1826-NKGQ 2.8~12mm, 700 TVL

EV-18C Zeta series OSD controller

• 960H Resolution, 700 TV Lines• 1⁄3” Sony Super HAD II CCD• 12VDC Operation• 30 IR LEDs for nighttime use• • Cables concealed in bracket to prevent tampering• • Can mount to industry-standard lampholder cover

• 960H Resolution, 700 TV Lines

• 1⁄3” Sony Super HAD II CCD

• IR LEDs for nighttime use

• Rugged, • 12VDC

• • 1⁄3• 1000 TV Lines• 2.8~12mm Varifocal lens• 12VDC/24VAC operation• • Cables concealed in bracket to prevent tampering•

• Wide viewing angle (170°)• 960H Resolution, 700 TV

Lines • DWDR (Digital Wide

Dynamic Range)• 3D-NR (3D Digital Noise

Reduction)• 1⁄3” Sony Super HAD II CCD• 12 VDC operation•

• Withstands temperatures of -40°~122° F

• 960H Resolution, 700 TV Lines• DWDR (Digital Wide Dynamic Range) for clear

images in strong backlight• 1⁄3” Sony Super HAD II CCD • 12VDC Operation• 42 IR LEDs for nighttime use• • Cables concealed in bracket to prevent tampering• • Can mount to industry-standard lampholder cover


images in strong backlight• 1⁄3” Sony Super HAD II CCD • 12VDC Operation• 42 IR LEDs for nighttime use• Rugged, weatherproof construction

• OSD functions programmable with controller (EV-18C) sold separately

• Cables concealed in bracket to prevent tampering• • Can mount to industry-standard lampholder cover


images in strong backlight• 1⁄3” Sony Super HAD II CCD • 12VDC Operation• 2.8~12mm Varifocal lens• 84 IR LEDs for nighttime use• • OSD functions programmable with controller

(EV-18C) sold separately • Cables concealed in bracket to prevent tampering• Optional Mounting Brackets:• EV-11LR

Large, round junction box• EV-11LS• Single-gang mounting plate

• - EV-1816-N6GQ - EV-1816-NKGQ - EV-1826-NKGQ

• Flexible installation allows the user to program special features from the installation site or the control room

• One controller will work for several cameras

EV-C1306-MG3Q 2.8~12mm, 1000 TVL

EV-6600-N2BQ 2.8mm, 600 TVL

EV-6620-N3WQ 3.7mm, 700 TVL

EV-6680-N3WQ Programmable, motion-activated LED, similar to real PIR

EV-6681-N3WQ 18 Covert 940nm IR LEDs

• Camera is mounted behind a 12” one-way observational mirror

• DWDR (Digital Wide Dynamic Range) for clear images in strong backlight

• 2D-NR (2D Digital Noise Reduction) for clear images in low light

• 1⁄3” Sony Super HAD II CCD, 600 TVL• OSD (On-Screen Display) for programming• 3-Axis mounting arm with cables concealed in bracket• 12VDC operation

• Contained in discreet, non-

• 960H Resolution, 700 TV Lines• DWDR (Digital Wide Dynamic

Range) for clear images in strong backlight • 12VDC, 3.7mm

• 1⁄3” Sony Super HAD II CCD• OSD (On-Screen Display) for

programming special features

• Contained in a discreet ceiling-mount housing

• 960H Resolution, 700 TV Lines

• 1⁄3” Sony Super HAD II CCD•

Camera can face either the side or the bottom of the housing

• Cables concealed in housing • 12VDC

4

EV-1606-N3SBQ

EV-5105-N1SQ 1.5mm, 700 TVL EV-6640-N3WQ 3.7mm, 700 TVL

EV-H1006-MG1Q 2.8~12mm, 720p/960HEV-H1006-4G1Q 4mm, 720p/960H

DRH-104Q 4 Channels

DRH-108Q 8 Channels

DRH-116Q 16 Channels

EV-H2006-MG1Q 2.8~12mm, 720p/960HEV-H2006-4G1Q 4mm, 720p/960H

EV-7605-NYWQ 3.9~46mm, 600 TVL

E-941EC2-N1Q 1.5mm, 700 TVL

EV-4605-N3SQ 3mm, 600 TVL

EV-4606-N3SBQ 3mm, 700 TVL, 940nm IR

• 960H Resolution, 700 TV Lines•

bumpers, entryways, and more• Includes two stainless-steel mounting plates (single-

gang and slimline) or mount without plate• Camera can be installed without the plates• DWDR (Digital Wide Dynamic Range) for clear

images in strong backlight• 2D-NR (2D Digital Noise Reduction) for clear images

in low light• ¼” Sony EXview HAD II CCD • 12VDC• 170º wide angle• • Heavy-duty vandal-resistant design

• 960H Resolution, 700 TV Lines• Indoor or outdoor use• • Small size protrudes only 1” (26mm) from wall or

ceiling• DWDR (Digital Wide Dynamic Range) for clear

images in strong backlight• 2D-NR (2D Digital Noise Reduction) for clear images

in low light• 1⁄3” Sony Super HAD II CCD• • Heavy-duty vandal-resistant design• Cables concealed in housing• No exposed screws, tamper-resistant• 12VDC operationOptional Mounting Brackets:• EV-6640SWQ

Surface-mount bracket

• video surveillance

• Rugged, vandal-resistant design with no exposed screws and concealed cable

• • 1⁄3•

• 720p/960H Resolution for crystal clear

• Cables concealed in bracket• Dual Array IR LEDs (equivalent to 48 LEDs)

• 1⁄3• •

• Connects to HD-AHD cameras• High-resolution recording and playback over coaxial

cable – up to 1920x1080• H.264 Compression• • • Remote monitoring via Internet Explorer, Firefox,

Safari, and Chrome•

events, and more• •

• 3.9~46mm lens• ¼” Sony CCD• Up to 192x zoom (up

to 12x optical zoom and 16x digital zoom)

• • Up to 360°/second

high-speed pan/tilt motion

• OSD (On-Screen Display) for programming and displaying features, settings, and preset target views

•

• Advanced 128x DSS (Digital Slow Shutter)•

target views, each with its own characteristics such as white balance and auto exposure

• • 24VAC Operation• 20W@24VAC (with heater and fan on)Optional Mounting Brackets:

EV-7100CEILMCeiling-Mount Bracket

EV-7100POLEMPole-Mount Bracket

EV-7100FLUSMFlush-Mount Bracket

EV-7100CORNMCorner-Mount Bracket

• Seamlessly integrates with 1200-lb maglock, see pg. 12 for more information

• 960H Resolution, 700 TVL • 12VDC• ¼” Sony EXview HAD II CCD• DWDR (Digital Wide Dynamic Range)• 2D-NR (2D Digital Noise Reduction)• • Heavy-duty vandal-resistant designOptional Bracket:• E-941E-1K2/LQ – Optional L-bracket

• elevators, jail cells, and more

• DWDR (Digital Wide Dynamic Range) for clear images in strong backlight

• 2D-NR (2D Digital Noise Reduction) for clear images in low light

• 1⁄3” Sony Super HAD II CCD• •

IR (x24) for discreet monitoring

5

EV-N1106-3W4Q 1⁄3” Sony 1.37 Megapixel CMOS, 720p

EV-N1206-3W4Q ½.8” Sony 2.43 Megapixel CMOS, 1080p

EV-N1206-MW4Q ½.8” Sony 2.43 Megapixel CMOS, 1080p

DRN-104Q 4 Channels

DRN-108Q 8 Channels

DRN-116Q 16 Channels

DRA-104Q 4 Channels

DRA-108Q 8 Channels

DRA-116Q 16 Channels

EV-N2236-MW4Q ½.8” Sony 2.43 Megapixel CMOS, 1080p EV-N4206-2S4Q ½.9” Megapixel CMOS,

720p





• 3.6mm Lens• H.264 Support• • • • Dual Array IR LEDs (equivalent to 48 LEDs)

• 3.6mm Lens• H.264 Support• • • • • 36 IR LEDs

• 3.6mm Lens• H.264, Dual streams• • • •

• • H.264 Support• • • • Dual Array IR LEDs (equivalent to 48 LEDs)

• •

1920x1080• H.264 Compression• • Remote monitoring via Internet Explorer,

Firefox, Safari, and Chrome• Supports EXT alarm• Supports 4 channel inputs, 1 channel

alarm output• Up to 16 channels of 1080p playback

• • • • •

motion detection, events, and more•

• Available without HDD, or with

•

• •

(up to 1920x1080)• •

export• Dual-stream support• Dedicated audio channel for each video channel• • • •

• 2.8~12mm

• H.264, Dual streams

• Weatherproof

outdoor use• WDR

(Wide Dynamic Range) for clear images in strong backlight

• 3D-NR (3D Digital Noise Reduction) for cleaner images in low light

• • •

• 3.7mm Lens• • • ONVIF Support• • 940nm LEDs (x30)

6

4-Channel Kit

8-Channel Kit

NJ-P101M-PQ

NJ-A301U-TGAQ

NJ-A324U-TGAQ

• •

cables• • H.264 Compression• • Remote monitoring via Internet Explorer, Firefox,

Safari, and Chrome• • •

events, and more• •

Cameras Available Separately:

EV-N1006-3W4Q IP Camera – Bullet720P Resolution

EV-N2006-3W4QIP Camera – Rollerball720P Resolution

• Sends power over network via Ethernet cable where

• IEEE802.3af/at Compliant• • • Easy plug-and-play installation• Surge protection•

• 1 Channel Ethernet over Coax• • • • • Fast and easy to install • Sold as set

DRN-K1040Q 4 Channels, 4 cameras, 720p

DRN-K1080Q 8 Channels, 8 cameras, 720p

NJ-P101M-PQ Simple PoE Injectors

NJ-A301U-TGAQ 1-Ch, 802.3af Compliant

NJ-A324U-TGAQ 24-Ch, 802.3af Compliant

NE-SE01-020Q Up to 650ft (200m)EV-N5205-1S4Q ½.8” Megapixel CMOS, 720p

• • H.264 Support• • • ONVIF Support•

IPB-A1100Q Up to 3,900ft (1,200m)IPB-A1100Q Up to 3,900ft (1,200m)

NR-P101FQ 802.3af Compliant

NR-P101TQ 802.3at Compliant

IPB-A1200Q Up to 5,900ft (1,800m)

NE-AC01-050Q Up to 1,640ft (500m)

NE-AE01-030TQ Up to 984ft (300m)

NS-105UT-GAQ NS-516UT-GAQ

IPB-A1200Q

• Extends power and data beyond normal limit of 328ft (100m)

• • • • Sealed and fanless for increased reliability

• over existing coax cable

• •

• signal camera over coax cable

•

Switch over one coax cable.

• • •

separately)

•

• • • • Compatible with IEEE802.3af/at standard

NS-105UT-GAQ 5-Port PoE Switch



• over existing coax cable

• •

7

ST-UV12-S1.0Q

EVP-1SA4P9UL

PS-U0906-PULQ

PS-U1812-PULQ

PH-A1612-PUQ 16 Outputs, 12A Continuous

EVP-124M6P16Q 16 Outputs, 6A Continuous

EVP-1SA4P4UL 4 Outputs, 4A Continuous



PS-U0406-PULQ 4 Outputs, 6A Continuous



PH-U1612-PULQ 16 Outputs, 12A Continuous

PH-U3212-PULQ* 32 Outputs, 12A Continuous

ST-LA108-TPQ 0.8A Output currentST-LA115-TPQ 1.5A Output current

ST-LA130-TTQ 3.0A Output current

PA-U0405-NULQ 4 Outputs, 5A Continuous

ST-UV12-S0.5Q 0.5A, Plug-in, Switching



ST-UV12-S5.0Q 5.0A, Desktop, Switching

ST-1212-R0.5A 0.5A, Plug-in, Linear


PS-U3612-PULQ* 36 Outputs, 12A Continuous

SB-L10V1-20Q 10W, 2000mAh, In-line

SB-P1012-26Q 10W, 2600mAh, Plug-in

PD-4PSQ 4 Outputs, 5A

PD-9PSQ 9 Outputs, 5A

• Universal 100~240 VAC input• 6A Continuous supply current• Lightweight, cost-effective design• • Adjustable output to compensate for voltage drop

• Individual output status LEDs• Heavy-duty steel case with removable cover• • Ultra-low ripple voltage for improved image quality

• Universal 100~240 VAC input• 12A Continuous supply current• Lightweight, cost-effective design• • Adjustable output to compensate for voltage drop

• Individual output status LEDs• Heavy-duty steel case with removable cover• • Ultra-low ripple voltage for improved image quality

• • •

• Terminal blocks•

- 18~24 VAC/VDC for 12VDC - 24~28 VAC or 26~28 VDC for 24VDC

• •

• Universal 100~240 VAC input

• • Adjustable output voltage

12~13.8 VDC•

protection• Thermal cutoff (TCO)

not affected• High-voltage and overcurrent protection•

• Universal 100~240 VAC input• 12A Continuous supply current• • • Individual dual color output status LEDs• Flexible cable management options• Removable screw terminals for convenient

installation and reliable connections• Adjustable output to compensate for voltage drops

• Field-selectable 24 or 28 VAC• 120VAC Input, 60Hz• 12A Continuous supply current• • • Individual dual color output status LEDs• Flexible cable management options – brackets and

hooks included• Removable screw terminals for convenient

installation and reliable connections

• • 120VAC Input, 60Hz• 3A@12VDC / 3A@24VAC continuous current• • Adjustable voltage output to compensate for voltage

• Individual output status LEDs• Heavy-duty steel case with removable cover• • 8 Outputs are 12VDC; 8 outputs are 24VAC

• 120VAC Input, 60Hz• • Individual output status LEDs• Heavy-duty steel case with removable cover

• on power strips

• 100~240 VAC Input• Regulated 12VDC output• 6ft (1.8m) Cord, 2.1mm

plug (positive center)• Use for CCTV, alarms, access control, etc.

• • 12VDC Output•

(pending camera current)• Auto switch to internal battery

during power failure• Short-circuit, over-voltage, over-load protection

• 1.1-Amp each output• • Includes circuit board only• •

SB-P1012-26Q

8

EB-P501-20QEB-P501-01Q

EB-P101-20QEB-P101-01Q

EB-P304-01MQ

EB-P304-01EQ

EB-D304-01EQ

Receiver

Transmitter

EB-P101-20VQ

EB-P501-01Q Standard balun, UL

EB-P501-01SQ Balun with surge protection, UL

EB-P501-20Q Balun with 6” pigtail, UL

EB-P304-01MQ 4-Channel, mid-point

EB-P316-60MQ 16-Channel, mid-point, rack-mount

EB-C304-01EQ 4-Channel, end-point 24VAC

EB-D304-01EQ 4-Channel, end-point 12VDC

EB-C316-60EQ 16-Channel, end-point 24VAC, rack-mount

EB-D316-60EQ 16-Channel, end-point 12VDC, rack-mount

EB-P304-01EQ 4-Channel, end-point

EB-P316-60EQ 16-Channel, end-point, rack-mount

EB-P101-20VQ DC Plug and jack, RJ45

EVT-PB1-L05Q DC Plug and power converter, terminal blocks, rack-mount

EVT-AB1 Transmitter and receiver set

EVT-TB1-42T Active transmitter

EVT-RB1-4T2 Active receiver

EB-P101-01Q Standard balun

EB-P101-20Q Balun with 6” pigtail

EB-P501-02Q Elite balun, UL

EB-P101-24GQ Ground loop balun

EB-P104-01Q 4-Channel passive hub

EVT-AH16-VT2Q 16-Channel active hub

EB-P116-01Q 16-Channel passive hub

EB-P101-25WQ Weatherproof balun

• • • • Sleek design with ergonomic grip• Screw terminals for easy installation• Sold in quantities of 10

• • • Screwless terminals for quick installation•

• •

or data pass-through• • • Sleek design with ergonomic grip• Screw terminals for easy installation

• •

external power required•

1,300ft (400m) color•

12~24 VAC/VDC input and jumper-selectable output

• Weatherproof for outdoor use•

1,300ft (400m) color•

external power required• •

• Rack-mount or stackable• Transmits up to 3,000ft (914m) with passive baluns

• Compact 1U mounts in a standard 19” rack• • • • • •

• • Transmits power and data to the camera while

receiving video from the camera•





(1 Amp/channel) to power CCTV cameras

• Connects up to four CCTV cameras to a central location

•

• power required

•

• Connects up to 16 CCTV cameras to a central

• (400m) color

• • Compact 1U mounts in a standard 19” rack• •

• with active receiver

• Video, data, and surge protection

• design

• power adapter

•

• •

(400m) color•

external power required• • Screwless terminals for quick

installation•

9

VA-1102B-WQ

VA-2101B-WQ

VC-1BAQVA-1104B-WQ

VA-2404B-WQ

VC-3BAQ

VA-1102B-WQ 1 Input, 2 outputs

VA-1104B-WQ 1 Input, 4 outputs

VA-2101B-WQ 1 Input, 1 output

VA-2404B-WQ 4 Inputs, 4 outputs

RD-304-D1Q Data distributor

EVA-RS1 RS-232 to RS-485 converter

VC-1BAQ 720x480 Resolution

VC-3BAQ 1280x1024 Resolution, BNC pass-through

VC-2VAQ 1024x768 Resolution

VG-1C12BQ Ground loop isolator

VS-1V12BQ Video surge protector

IPV-PD88Q IP surge protector

IPV-P188Q PoE surge protector

VS-1V22AQ HD-SDI surge protector

VS-1AHHAQ HDMI surge protector

• Distributes single video input to multiple outputs• Transmits up to 984ft (300m)• 12VDC or 24VAC Operation• • VA-1102B-WQ Only:•

• • Transmits up to 3,280ft (1,000m)• 12VDC Operation•

channel• •

• • Transmits up to 3,937ft (1,200m)• Connect up to 64 cameras or

devices

•

• Transmits up to 3,937ft (1,200m)• Connect up to 32 cameras or devices

• Converts almost any VGA monitor into a security monitor

• • OSD (On-Screen Display) for programming• Desktop, VESA, or wall-mountable• Compact size

• Connect a device with VGA output to an existing

• Up to 1024x768 VGA input resolution

• Composite video output

• OSD (On-Screen Display) for programming

• •

installation

• Surge protection for analog cameras

• output

•

•

•

• • Compatible with IEEE802.3af/at standard

• Surge protection for HD-SDI devices

• female output

• devices

CA-161TDC Plug-to-terminal block

CA-151RDC Jack-to-removable terminal block

EVA-CB0R1QBNC-to-RCA Connector with gold-plated connectors

EVA-WB0B1-08Q6” (15cm) Male-to-female BNC connector with gold-plated connectors

CA-171TRJ45 to terminal block

CA-1616QDC Plug-to-plug adapter

CA-1515QDC Jack-to-jack adapter

CA-1526-1F1ft DC Jack-to-double DC plug

X-714-046-18BHook-and-loop cable tie

CA-1615-06LQ 6” Jack-to-plug connector

CA-1510-3FLQ 3ft Pigtail connector

CA-1610-3FLQ 3ft Pigtail connector

EVA-F5521-3Q 3ft DC Plug pigtail connector, red/black wire

EVA-M5521-3Q 3ft DC Jack pigtail connector, red/black wire

• • LED Indicates power and

• • LED Indicates power and

• • LED Indicates power and polarity•

10

SK-910RAQ

DE-A101Q DE-A104Q

SK-910RAQ 315MHz, 11~24 VAC/VDC, 3A relay

SK-910RAVQ 315MHz, 3~13.8VDC, 5A transistor ground output SK-910RAV2Q 315MHz, 3~13.8VDC, two 3A

transistor ground outputs

SK-910RBQ 315MHz, 11~24 VAC/VDC, 10A@24VDC relay

SK-910R-4Q* 433.92MHz, 11~24 VAC/VDC, 10A@24VDC relay

SK-910R3Q 315MHz, 11~24 VAC/VDC, 10A@24VDC per relay

SK-910R3-4Q* 433.92MHz, 11~24 VAC/VDC, 10A@24VDC per relay

SK-91ERSD 315MHz

SK-93ERSD 433.92MHz

SK-910RB2Q 315MHz, 11~24 VAC/VDC, 10A@24VDC per relay


• Control garage doors, house lights, etc.•

- - - Toggle - Validity -

• LED Indicates RF reception, learn mode entered, transmitter learned, memory cleared

• but in smaller housing, no latch mode

• but in smaller housing, no latch mode

• •

• Convert your product to wireless control•

product to market faster•

Standard Receivers Standard Receivers

Mini ReceiversMini Receiver


- - - Toggle - Validity -


Standard receivers only:• Independently programmable outputs


- - Toggle - Latching - Validity



- - Toggle - Latching - Validity


*

DE-A101Q USB 2.0, Active, 1 input, 1 output

DE-A104Q USB 2.0, Active, 1 input, 4 outputs

SK-910R4Q 315MHz, 11~24 VAC/VDC, 10A@24VDC per relay


DE-S101Q USB 1.1, Passive, 1 input, 1 output

• up to 300ft (100m)

•

• •

•

• • Easily control a DVR remotely without accessing a

network or the internet• – no power required• ½” x 17⁄16” x 7⁄8” (64 x 37 x 22 mm)

VD-10BNADummy Box Camera with Flashing LED• Uses 2x AAA batteries

VD-10PLDummy IR Bullet Camera with Working IR LEDs• Uses 2x AA batteries

VD-30SSQSolar-Powered Dummy Camera with 24 Working IR LEDs• Uses 2x rechargeable AAA

batteries

VD-20BNNAQDummy Rollerball Camera with 23 Working LEDs• Uses 2x AA batteries

VD-30BNNAQDummy Bullet Camera with 23 Working LEDs• Uses 2x AAA batteries

Battery life:

11

SK-919TD1S-UP 315MHz, Factory pre-coded

SK-919TT1S-BU 315MHz, DIP Switch coded

SK-939TS1S* 433.92MHz, DIP Switch coded

SK-919TDWS-BU 1 Button, 315MHz

SK-939TDW-BUQ* 1 Button, 433.92MHz

SK-9HBCBelt-clip holster for slimline handheld transmitters, Patented

X-930-0893VDC Lithium battery

SK-919TP1H-BUQ 1 Button, 315MHz

SK-939TP1H-BUQ* 1 Button, 433.92MHz

SK-919TP2H-NUQ 2 Buttons, 3-Channel, 315MHz

SK-939TP2H-NUQ* 2 Buttons, 3-Channel, 433.92MHz

SK-919TP4H-NUQ 4 Buttons, 15-Channel, 315MHz

SK-939TP4H-NUQ*4 Buttons, 15-Channel, 433.92MHz

SK-919TP3JRUQ 315MHz, Factory pre-coded

SK-917TP3J-RU 315MHz, CODEBUMP™ Codehopping technology

SK-919TP4J-NUQ 315MHz, Factory pre-coded

SK-917TP4J-NU 315MHz, CODEBUMP™ Codehopping technology

SK-939TS4J-NU* 433.92MHz, Factory pre-coded

SK-919TD2A-UP 315MHz, Factory pre-coded

SK-917T2A-UQ 315MHz, CODEBUMP™ Codehopping technology

SK-939TS2A-PQ* 433.92MHz, Factory pre-coded

SK-915LPLeather pouch for SK-919TD1S-UP

SK-915BA12VDC Battery

• • Over 68 billion possible codes• LED Transmission indicator

• • Over 68 billion possible codes•




• •

version has over 18 quintillion codes)• LED Transmission indicator

• Adds wireless functionality to wired devices such as RTE plates

• • Over 68 billion possible codes• LED Transmission indicator• External or internal battery power

• •


• •


• Over 68 billion possible codes• LED Transmission indicator• Extreme durability – rubber buttons eliminate

damage caused by electrostatic discharge• Gold-plated battery clips and contact points extend

the life of the transmitter• 1/2”x23/16”x1/2• Includes visor and wall mount clip







* **Actual range may vary depending on installation and operation environment

SK-919TP1F-NUQ 1 Button, 315MHz

SK-939TP1F-NUQ* 1 Button, 433.92MHz SK-919TP2F-NUQ 2 Buttons, 3-Channel, 315MHz

SK-939TP2F-NUQ* 2 Buttons, 3-Channel, 433.92MHz

SK-919TP3F-NUQ 3 Buttons, 315MHz

SK-939TP3F-NUQ* 3 Buttons, 433.92MHz

SK-919TP4F-NUQ 4 Buttons, 15-Channel, 315MHz

SK-939TP4F-NUQ*4 Buttons, 15-Channel, 433.92MHz

• vehicles, plus manual paging

• Connect to burglar or communications panel• ½ mile (0.8km)**• Includes belt-clip vibrating receiver (E-37RV)Optional Accessories Available:• E-37RV – Extra belt-clip vibrating receiver• E-37ANT – Optional antenna; use as an alternative

E-37EV Alarm pager system

12

LIFETIMEWARRANTY

E-941SA-1200Standard lock, UL listed

E-941SA-1K2PQBond sensor, status LED, UL listed

E-941SA-1K2PDBond sensor, status LED, 1~78 sec timer

E-941DA-1K2QDouble-door, standard lock, UL listed

E-941DA-1K2PDouble-door, bond sensor, status LEDs, UL listed

E-941DA-600QDouble-door, standard lock, UL listed

E-941DA-600PQDouble-door, bond sensor, status LEDs, UL listed

E-941SA-80QStandard lock, indoor/outdoor use

E-941EC2-N1Q 1.5mm Wide-angle lens

E-941SA-600Standard lock, UL listed

E-941SA-600PQBond sensor, status LED, UL listed

E-941SA-300Standard lock, indoor/outdoor use

E-941SA-300RQStandard lock, indoor use

• 1,200-lb Holding force • 12 or 24 VDC Selectable operation• No residual magnetism• • Anodized aluminum housing (US28)• Adjustable mounting and detachable faceplate•

E-941SA-1K2PQ and E-941SA-1K2PD Only:•

show locking status

• 1,200-lb Holding force each door• 12 or 24 VDC Selectable operation• No residual magnetism• • Anodized aluminum housing (US28)• Adjustable mounting and detachable faceplate•

E-941DA-1K2P Only:•

to show locking status

• 600-lb Holding force each door• 12 or 24 VDC Selectable operation• No residual magnetism• • Anodized aluminum housing (US28)• Adjustable mounting and detachable faceplate•

E-941DA-600PQ Only:•

to show locking status

locks. See page 13 for more information.

• 600-lb Holding force • 12 or 24 VDC Selectable operation• No residual magnetism• • Anodized aluminum housing (US28)• Adjustable mounting and detachable faceplate•

E-941SA-600PQ Only:•

show locking status

• 300-lb Holding force • 12VDC Operation• Weatherproof for indoor or outdoor use• No residual magnetism• • Anodized aluminum housing (US28)• 3ft (1m) Hookup wire

• 300-lb Holding force • 12 or 24 VDC Selectable operation•

hand or left-hand swinging doors• No residual magnetism• • Anodized aluminum housing (US28)•

• For small, low-security drawers or cabinets• 80-lb Holding force @ 12VDC• 110-lb Holding force @ 24VDC• 12~24VDC Operation• No residual magnetism• • Anodized aluminum housing (US28)

• Seamlessly integrates with all 1,200-lb single or double-door maglocks (see above)

• doorways and lobbies • 12VDC Operation

•

13

E-946FC-1K2Q E-946FC-600Q

E-942FC-1300Surface mount, UL listed

E-946FC-1K2QFace and surface mount, UL listed

E-942FC-1K3SQSurface mount, weldable bracket

E-946FC-1K2SQFace mount, weldable bracket

E-942FC-600Surface mount, UL listed

E-946FC-600QFace and surface mount, UL listed

E-942FC-600SQSurface mount, weldable bracket

E-941S300R/ZQ For E-941SA-300RQ

E-941S-600/ZQ For 600-lb maglocks

E-941S-1K2/ZQ For 1,200-lb maglocks

• For sliding or swinging gates• 1,200-lb Holding force• 12 or 24 VDC Selectable operation• Weatherproof and vandal resistant• • 6½ft (2m) Hookup wire•

• Weld or bolt brackets directly to the gate• 1,200-lb Holding force•

• Weatherproof and vandal resistant• 12 or 24 VDC Selectable operation• Adapter and mounting hardware included

• Weld or bolt brackets directly to the gate• 1,200-lb Holding force•


• Weld or bolt brackets directly to the gate• 600-lb Holding force•


• For sliding or swinging gates• 600-lb Holding force• 12 or 24 VDC Selectable operation• Weatherproof and vandal resistant• • 6½ft (2m) Hookup wire•

• For mounting on in-swing doors• Includes one L bracket

• installation of armature plate

• Includes cover plate for hiding mounting screws to prevent tampering

• For offset mounting• Each kit includes

two (2) L brackets

Z Brackets

Armature Plate HolderE-941S-600/HQ For 600-lb maglocks

E-941S-1K2/HQ For 1,200-lb maglocks

E-942F1300/ZQ For E-942FC-1300, E-946FC-1K2Q

E-942F-600/Z For E-942FC-600, E-946FC-600Q

E-942F-1300/L For E-942FC-1300

E-946F-1K2/LQ* For E-946FC-1K2Q

E-942F-600/L For E-942FC-600

• For mounting the armature plates to a metal-core door or for non-standard armature installations

• the armature plate

Z Brackets

L Brackets

L BracketsE-941S300R/LQ For E-941SA-300RQ

E-941S-600/LQ For 600-lb maglocks

E-941S-1K2/LQ For 1,200-lb maglocks

• For offset mounting• Includes one L bracket• Can be used as angle

bracket

• For mounting on in-swing doors•

installation of armature plate

• Extends door stop to create

U Brackets

Plate Spacers

E-941S300R/UQ For E-941SA-300RQ

E-941S-600/UQ For 600-lb maglocks

E-941S-1K2/UQ For 1,200-lb maglocks

E-941S-300/PQ For E-941SA-300

E-941S300R/PQ For E-941SA-300RQ

E-941S-600/PQ 3/16” for 600-lb series

E-941S-1K2/PQ 1/4” for 1200-lb series

E-941D-600/PQ For 600-lb double-door

E-941D-1K2/P For 1200-lb double-door

• For glass doors• Includes one U bracket

and one armature plate holder

• Adjustable for 9~13 mm glass

* Only includes one (1) L-bracket

14

SD-995C-LE50

SD-994CSD-995C

SS-299Q SS-199Q

SD-997B-GBQ Fail-safe Operation, 12/24VDC SD-994C 12VDC, for Wooden Doors

SD-994C24 24VDC, for Wooden Doors

SD-995C 12VDC, for Metal Doors

SD-995C24 24VDC, for Metal Doors

SD-997A-DQ Fail-secure Operation, 12VDC

SD-997B-1SQ Fail-safe Operation

SD-996C-NUQ 12/24VDC, UL

Key # SS-090KN SS-095 SS-0901300 SS-090KN-0 SS-090-2H01301 SS-090KN-1 SS-090-2H11302 SS-090KN-2 SS-090-2H21303 SS-090KN-3 SS-090-2H31304 SS-090KN-4 SS-090-2H4

1306 SS-090KN-6 SS-090-2H61307 SS-090KN-7 SS-090-2H71308 SS-090KN-8 SS-090-2H81309 SS-090KN-9 SS-090-2H91310 SS-090KN-X SS-090-2HX

SK-990AQ 10~14 VDC, Fail-secure

SK-990BQ 10~14 VDC, Fail-safe

SS-299Q Single-gang

SS-199Q Slimline

SD-991AQ Fail-secure

SD-995C-LE25 Lip Extender, 25mm

SD-995C-LE50 Lip Extender, 50mm

SD-999C-NUQ 12/28 VAC/VDC

SS-090 SeriesKey removable in both ON and OFF positions

SS-090-1H0 Key removable in OFF position

SS-095 SeriesKey removable from OFF position only

SS-092-2A0 Key removable in both positions

SS-90KN Series Extra keys

SD-993B-SS Fail-safe Operation

• 12/24 VDC Operation• Fail-safe operation –

unlocks when power is lost

• For concealed mounting• 5⁄8• Narrow design – 77⁄8”x1¼” (200x32 mm)• Mounting brackets available:• •

• Field-programmable for fail-safe or fail-secure operation

• • Reversible, non-handed design

• Shallow design for use with most doors

• Stainless-steel lip for strength and long life

• • Non-polarized connection• Tested to 1 million cycles•

• • (key #1300 only)

• •

from ON

• one always ON, one always OFF (key #1300 only)

• Compatible with door strikes

and SD-996C-NUQ

• Field-programmable for fail-safe or fail-secure operation

• • Non-polarized connection• 12~28 VAC/VDC Operation• • Lock and door status outputs• • 11⁄16” (17mm) Latch throw• Surface-mount installation

• Specify number when ordering

• 10~14 VDC• For entrance doors• For use in wood doors•

• Operating voltage 9-16VAC, 12-24VDC• Can be used on virtually any mortise or

cylindrical door locking system• Fail-secure operation• • Steel face plate•

• Stainless-steel plate with 3/4” D-hole

• Includes three faceplates for nearly any type of door• Field-programmable for fail-safe or fail-secure

operation• •

• •

• but fail-secure

• 12VDC Operation• Fail-secure operation

– locks when power is lost

• Incorporates manual lock/unlock cylinder to operate

• 12VDC Operation• Fail-safe operation

– unlocks when power is lost• For cabinets or small doors• For surface mounting• ½

• • 12/24 VDC Operation• Fail-safe operation

– unlocks when power is lost• Small size for use with most

metal door jambs• Works with sliding, single-action, and double-action

doors and gatesMounting brackets available:• •

SD-997SMB-AQSurface-mount bracket for DeadBolt (SD-997B-GBQ)

SD-997UB-AQU-Bracket for glass doors for DeadBolt (SD-997B-GBQ)

SD-993S-SBSurface-mount bracket set for Shear Lock (SD-993B-SS)

SD-993S-UBU-Bracket for glass doors for Shear Lock (SD-993B-SS)

All key locks are patented

15

SK-2323-SPQ SK-2323-SPAQ

SK-1131-SPQSK-1011-SDQ

SK-1323-SPQ

EAP-5D5Q

SK-1123-SQ SK-1123-FQ

KD-100Q Dummy keypad

EAP-5D1Q 1 Output

EAP-5D5Q 5 Outputs

EAP-5D1MQ Power supply board

PD-5PAQ 5-Output power distribution board used in EAP-5D5Q

SK-2323-SDQ Standard keypad

SK-2323-SPQ Keypad with proximity reader

SK-2323-SPAQ Piezoelectric keypad with proximity reader

SK-1323-SDQ Standard keypad

SK-1323-SPQ Keypad w/ proximity reader

PR-312S-PQ Indoor use

SK-3523-SDQ Outdoor Keypad

PR-112S-A Indoor/outdoor use

PR-K1S1-AProximity cards

PR-K1K1-AQProximity keyfobs

SK-1011-SDQ Standard keypad, 1 output

SK-1131-SPQ Keypad w/ proximity reader

SK-1123-SQ Standard keypad

SK-1123-FQ Flush-mount keypad

SK-1123-SPQ Keypad with proximity reader

• • Keypad beeps when pressed• Weather resistant• Use 4x AAA batteries

• Supply current

• supervision relay with programmable delay timer

• Automatically switch to backup battery

• Field selectable 12/24 VDC output

• 110 Users• 12~24 VAC/VDC Operation• 4~8 digits user code• • Relays have programmable output time (1~999

seconds or toggle)• Weatherproof design• • Egress input, tamper switch, door sensor input

• 1,010 Users• Adjustable user

code length (2~6 digits)

• 12~24 VAC/VDC Operation

• Two relay outputs (1A@30VDC)

• Relays have programmable output time (1~99 seconds or toggle)

• Weatherproof design – circuitry is potted with epoxy• • Two egress inputs, door sensor input

• 1,010 Users• Adjustable user code length

(2~6 digits)• 12~24 VAC/VDC Operation• Two relay outputs

(1A@30VDC)• Relays have programmable

output time (1~99 seconds or toggle)

• Weatherproof design – circuitry is potted with epoxy

• nighttime use

• Two egress inputs, door sensor input

• • Rugged construction – heavy-duty stainless steel

faceplate with a coated steel backing• 12~24 VAC/VDC Operation• Two relay outputs (12A@14VDC)• Outputs have a programmable output time

(1~99 seconds or toggle)• Weatherproof design• • Egress input, tamper switch, door sensor input

• • • plus 1 master card• 2 Cards included (additional

cards available – sold separately in packs of 10)

• 1~180 sec or latch• Status LEDs for operations and

programming• Solid-state lock relay for longer

life, lower power consumption, and shock/vibration resistance

• Up to 100 users• 12VDC Operation• 10 Cards included• One relay output

(1A@30VDC)• Outputs have programmable

output time (1~180 seconds or latch)• Weatherproof design • Egress input• Tri-color wave-shaped LED status bar indicates

proximity reader’s mode and status

• Sold in packs of 10 • Sold in packs of 10

• Up to 1,000 possible user codes and/or proximity cards programmable for output #1, 100 for output #2, 100 for output #3

• 12~24 VAC/VDC Operation•

programmable for one-time or limited-time use•

door lock/unlock• • • Outputs #1 and #3 can be programmed to activate

for up to 99,999 seconds (nearly 28 hours)• • Keypad illuminates when a button is pressed;

backlight can be programmed for OFF or dim in

• mount back box included)

• All features are programmed directly from the

• in case of power loss

SK-1131-SPQ Only:•

16

SD-9263-KSVQ SD-9163-KSVQ

SD-927PKC-NSQSD-927PKC-NEQ

SD-72002-V0 SD-71002-V0

DP-236Q Complete Kit

DP-236-MQ Additional Monitor

Optional Accessories:

DP-236-BQAdditional battery

DP-236-SQCharging stand



SD-927PKC-NEQ English

SD-927PKC-NSQ Spanish

SD-927PKC-NFQ French

SD-927PWCQWhite plate, English, Spanish, and French Messages Included

SD-9263-KSVQ Single-gang, English, Mechanical override

SD-9163-KSVQ Slimline, English, Mechanical override

SD-9263-KSQ Single-gang, English

SD-9163-KSQ Slimline, English

SD-9263-KS1Q Single-gang, Spanish

SD-9163-KS1Q Slimline, Spanish

SD-9963-KSGQ Post-mount No-Touch Sensor



• “Goose-neck” mounting• No touch – just wave a

hand in front of the sensor• Weatherproof for outdoor

use• Adjustable sensing range

up to 4”(10cm)• 12/24 VDC• Adjustable sensing range

and delay time

• No touch – just wave a hand in front of the sensor• Sensing range up to 4” (10cm), 12VDC• Attractive “ring” illuminator turns from red to green

or green to red (selectable)• Reduces the risk of cross contamination• Reliable IR technology senses motion

• No touch – just wave a hand in front of the sensor• Weatherproof for outdoor use• Adjustable sensing range up to 4”(10cm), 12/24VDC• Attractive “ring” illuminator turns from red to green or

green to red (selectable)• Reduces the risk of cross contamination• Reliable IR technology senses motion

• Wireless operation – camera and monitor can

• Camera has built-in IR LEDs for nighttime operation• Remotely and securely talk to visitors and unlock

doors or gates via the monitor• Lightweight monitor can be carried around the

premises while talking to the visitor• Connect up to two additional monitors•

the camera and takes photos of the visitor as they approach

• • • • Egress input• 120° wide viewing angle

• – no handset needed

• Remotely unlock door• Simple 2-wire connection• Camera has built-in LEDs for nighttime operation• Connect up to two additional monitors (optional)•

• Remotely and securely talk to visitors via built-in handset

• Remotely unlock door• Simple 2-wire connection• Camera has built-in LEDs for nighttime operation• Connect up to two additional monitors (optional)•

• 2” Square illuminated green pushbutton

• delay timer (0~3 seconds)

• timer (1~30 seconds)

• Form C relay outputs for lock relay and remote alarm

• • Fits in standard double-gang backbox

• For electric lock control or alarm panels

• Keyed mortise cylinder (Inc. 2 keys)•

of keying• Flush mount with vandal-resistant

screws• • Stainless-steel front cover conceals screws•

rating, color-coded wires

SD-72081-6MQ Single-gang, Mortise Switch

SD-7428-GSEQ Delayed Egress RTE Plate

SD-72051-V0 Single-gang, Shunt ON/momentary OFF

SD-71051-V0 Slimline, shunt ON/momentary OFF

SD-72002-V0 Single-gang, Maintained ON/OFF

SD-71002-V0 Slimline, Maintained ON/OFF

• N.C. (Normally Closed)• Turn to open• • Shunt switch

17

SD-7201GAPT1Q

SD-7213-GSP

SD-6276-SSVQ

SD-7201KBQ

SD-8202GT-PEQ

SD-7113-GSP

SD-6176-SS1Q

SD-7101RAEX1Q

SD-8103GT-PEQ

SD-7103GC-PTQ

• NO/NC Contacts rated

• Stainless-steel faceplate

• Vandal-resistant• 1” Diameter pushbutton• NO/NC Contacts

• 2” Square illuminated green pushbutton with LED for longer life

• • Includes switchable English, French, and Spanish

messages

• seconds

• Illuminated green pushbutton with LED for longer life


• Some models include multiple message plates

• requires no external power


• Timer adjustable from 1~60 seconds * Special order item

• has no moving parts

• Field-programmable color, red or green

• •

seconds or toggle

• steel ring guard

SD-7201KBQ and SD-7101KBPE1Q Only:• N.C. Contact rated

• Illuminated red/green pushbutton

• Vandal resistant design• 1” Diameter pushbutton


• White plastic plate

• but with red mushroom-cap pushbutton

• status LED

• Field-programmable color, red or green

• • 12~24 VDC Operation• NO/NC Contacts rated

• sound level

• • • 12~24 VDC Operation• NO/NC Contacts rated

• Large green 2” diameter pushbutton

• Flush mount, protrudes only 9⁄16

• Aluminum back plate

• snaps to back plate

•

• For hard-to-wire installations

• (similar to

see page 10 for compatible receivers)

SD-7204SGEX1Q Single-gang plate

SD-7104SGEX1Q Slimline plate

SD-7202GC-PEQ Single-gang

SD-7103GC-PEQ Slimline

SD-7223GW-LQ Single-gang, White plastic

SD-7202GC-PTQ Single-gang, Square

SD-7201GAPT1Q Single-gang, Mushroom, English and Spanish

SD-7103GC-PTQ Slimline

SD-7213-GSP Single-gang, Green mushroom pushbutton

SD-7113-GSP Slimline, Green mushroom pushbutton

SD-7213-RSP Single-gang, Red mushroom pushbutton

SD-7273-SSP* Single-gang, Stainless-steel pushbutton

SD-7173-SSP* Slimline, Stainless-steel pushbutton

SD-7201GC-PEQ English, Green button

SD-7201GCPE1Q English and Spanish, Green button

SD-7201GFPE1Q English and Spanish, Green button, DPDT Switch

SD-6276-SS1Q Single-gang

SD-6176-SS1Q Slimline

SD-6276-SSVQ Single-gang, Manual override button

SD-6176-SSVQ Slimline, Manual override button

SD-8202GT-PEQ 2” Square, Green, Illuminated Pushbutton

SD-8103GT-PEQ Slimline, small square Illuminated Pushbutton

SD-8201GTPE1Q Green Mushroom Pushbutton

SD-7217GWQ Blank, Green button

SD-7201RCPE1Q English and Spanish, Red button

SD-7286-GWQ Blank, Green button

SD-7623-GSTQ RTE plate with dual-color LED and timer

SD-7217-GSBQ RTE plate with LED and adjustable buzzer

SD-7275SGEX1Q Single-gang

SD-7175SGEX1Q Slimline

SD-7201KBQ Single-gang, N.C., Black button

SD-7101KBPE1Q Slimline, N.C., Black button

SD-7101RAEX1Q Slimline, N.O., Red button

SD-7201GC-PEQ SD-7201GCPE1Q

18

SD-C101-SGQ(Grade 1)

SD-C121-S

SD-C131-SQ

SD-969-S18 SD-969-A18

SD-962AR-36A Standard device, Stainless-steel, UL

SD-962AR-36M

SD-962H-6LB Escutcheon lever trim, Grade 1

SD-962AR-36G Rugged device, Grade 1, UL

SA-025EQ Delayed egress timer

SD-C101-SGQ Size 1~6, up to 330-lb (150kg)

SD-C121-S Size 2, up to 100-lb (45kg)

SD-C131-SQ Size 3, up to 140-lb (65kg)

SA-027HQ Programmable annual timer

SA-027WQ Programmable 7-day timer

SD-961A-36 Push-to-Exit bar

SD-962HL-4A Locking door handle

SD-969-S18 Die-cast aluminum end Caps

SD-969-A18 Plastic end caps

• Rugged, heavy-duty construction• • • Includes 1 Armored Door Cord (SD-969-A18)

• Compatible with SD-962AR-36G

• Grade 1, through-bolted design• Rigid, non-clutch mechanism•

reversible

• 12~24 VAC/VDC Operation• 3 Relock modes for different installation

relocking• • Lock relay and remote alarm relay outputs (Form C,

10A@24VDC)• Local alarm output (transistor ground)

• Reversible non-handed design• Two independent valve adjustments for easy setting

of sweep and latch sweep speed• Anodized aluminum body• • Forged steel arms• Includes mounting hardware

• 12~24 VAC/VDC Operation • Two NO/NC Form C relays rated

10A@120VAC/28VDC• Events can be set weekly, daily, or hourly, over the

course of an entire year•

total of 100 events• • • • One egress input per relay• Output can be programmed for 1~99 seconds or

toggle

• 12~24 VAC/VDC Operation• One Form C relay rated 10A@120VAC/28VDC• Up to 60 programmable events• Holiday function (up to 99 days)• Adjustable output time (1~99 seconds or toggle)• • • Egress input and manual mode button

• - SD-962AR-36A - SD-962AR-36G

• USD26D Finish• Non-handed design

• Allows exit from inside while locked from outside• Reversible non-handed design• • Stainless steel ¾” (19mm) throw-latch bolt• Fits doors 30”~48” (0.7~1.2m) wide

• Conforms to and meets ADA regulations• Allows exit from inside while locked from outside• Reversible non-handed design• • Stainless steel ¾” (19mm) throw-latch bolt• Fits doors 36”~48” (0.9~1.2m) wide

• Conforms to and meets ADA regulations• Heavy-duty ANSI Grade 1 steel construction• Allows exit from inside while locked from outside• Reversible non-handed design• • Stainless steel ¾” (19mm) throw-latch bolt• Fits doors 33”~48” (0.8~1.2m) wide

• Designed to house wiring to electric locks or access control devices mounted in doors

• 18” (46cm) Stainless-steel cable

19

E-960-D90Q Range: Up to 90ft (30m)




E-931-S35RRQ Range: Up to 35ft (10m)


E-931-S50RRLQ Range: Up to 50ft (15m)

E-964-Q165Q Range: Up to 165ft (50m)




• 10~30 VAC/VDC Operation (non-polarized)•

model)• For indoor or outdoor use• N.O. or N.C. Alarm output• N.C. Tamper circuit included• Adjustable interruption time• •

E-964-D390Q Only:•

interference when installing multiple photobeams in close proximity

• 12~240VDC / 24~240VAC Operation• • • • • New single-gang box and wall-mount

bracket available. (see page 20)

• • • • Adjustable response time and sensing range• • New single-gang box and wall-mount

bracket available. (see page 20)

• • •

alignment and adjustment• • • Wall or pole-mountable• N.O. or N.C. Alarm output• N.C. Tamper circuit included•

• 12~24 VAC/VDC Operation (non-polarized)•

model)• Environmental output sends signal if weather

conditions are poor, helping prevent false alarms• For indoor or outdoor use• N.O. or N.C. Alarm output• N.C. Tamper circuit included• Adjustable interruption time• •

interference when installing multiple photobeams in close proximity

•

E-961-S90WQ Range: Up to 90ft (30m)

• 10~24 VAC/VDC Operation• • •

required• Adjustable lens angle

E-932-D33TBQ Range: Up to 33ft (10m)


• 12~18 VAC/VDC Operation

•

• Conveniently mounts to a single-gang box

• For monitoring entrances,

• Thru beam technology

• 12~18 VAC/VDC Operation•

• Conveniently mounts to a single-gang box

• For monitoring entrances, hallways,

•


E-931-S33PRQ Range: Up to 33ft (10m)

• • • Removable terminal blocks• • Anti-condensation housing•

• • • • Removable terminal blocks• • Anti-condensation housing•

20

E-9644-6B25

E-9661-6B190Q

ST-BT02Q

ST-BT03Q

E-9626-2B190Q 2-Beam pairs, 26” (66cm) long




CS-PD115-PAQ IR Proximity sensor

BD-T100Q Dummy photobeam

ST-BL01Q High-speed latching tester

E-9611-2B25 2-Beam, 111/4” (29cm) long, Black


E-9622-4W25 4-Beam, 221/2” (57cm) long, White


E-9644-6W25 6-Beam, 441/2” (113cm) long, White

E-9660-8B25 8-Beam, 60” (152cm) long, Black

E-9680-10B25 10-Beam, 80” (203cm) long, Black

• construction.

• Wall or pole-mountable.• Flashing red LED. • Uses 2 x AA batteries.

• 12~24VDC Operation, 30mA current draw• Triggers a warning or locking

device when the sensor is tripped

• Front panel is suitable for

• Form C relay output 1A@30VDC

•

• 5⁄16”x7⁄8” (34x23 mm)•

interference when installing multiple sensors in close proximity

• 12~24VDC Operation•

(Depending on model)• N.O. or N.C. Alarm output•

adjacent beams• N.C. Tamper circuit included

• Up to 393ft (120m) indoors

• End caps swivel for easy installation• ¼”x17⁄8•

when installing multiple sensors in close proximity• 12~24VDC Operation•

model)• For indoor or outdoor use• N.O. or N.C. Alarm output• •

ST-BT02Q Battery tester, 6-in-1, 12VDC

ST-BT03Q Battery tester, 6-in-1, 12/24 VDC

• - - - Voltage drop - Continuity

• Indicates the condition of rechargeable gel-type 12VDC batteries

• Equipped with a momentary simulated load• ST-BT03Q Only:• 12/24 VDC Operation• Includes headlight, LED

and buzzer• Continuity LED

• Real-time, latch, and auto-reset modes for testing N.O. and N.C. circuits

• Features LED and buzzer indicator for remotely testing a connection

• Convenient headlight LED to guide your way

E-931CS22RFCQ Range: Up to 22ft (7m)

E-931CS22RRCQ Range: Up to 22ft (7m)

• • No wiring necessary between sensor and speaker•

and speaker• Sensor can pair with an unlimited number of

speakers• • Sensor is weatherproof for outdoor use• Speaker makes chime or alarm sound when beam

is interrupted• Alarm output time is adjustable from 3~30 seconds• Optional accessories available (see right for more

info)• New optional wall mount bracket (see right for more

info)

• • Speaker makes chime or alarm sound when beam

is interrupted• • 32ft (9m) Cable from speaker to sensor• Alarm output time is adjustable from 3~30 seconds• Optional accessories available (see right for more

info)• New optional wall mount bracket

(see right for more info)

E-931ACC-SFQAdditional wireless speaker unit for:E-931CS22RFCQ

E-931ACC-SQAdditional speaker unit for:E-931CS22RRCQ

E-931ACC-SPQSolar charger for sensor unit for:E-931CS22RFCQ

E-931ACC-CQDigital counter for:E-931CS22RRCQ and E-931CS22RFCQ

E-931ACC-R2Q

E-931ACC-RC1Q

E-931ACC-HR1Q

E-931CS22RRCQ, E-931CS22RFCQ, E-931-S35RRQ, E-931-S50RRQ, and E-931-S33PRQ

E-931ACC-BLS6Q

bracket for: - E-931-S35RRQ - E-931-S45RRQ

E-931ACC-BLS7QL bracket for Side Mounting for: - E-931-S35RRQ - E-931-S45RRQ

E-931ACC-BLS8QWall or door frame bracket for:- E-931CS22RFCQ - E-931CS22RRCQ - E-931-S35RRQ - E-931-S45RRQ

21

SR-2112-C7AQ/10 SPDT, 7A

SR-2206-C5AQ DPDT, 5A

SR-2212-C5AQ DPDT, 5A

SR-1212-C2ALQ DPDT, Low current

SR-1212-C7ALQ SPDT, High-sensitivity

Voltage (DC) Current Current

ST-1206-1.5AQ 6 / 12 1.5A 2A

ST-2406-2AQ 6 / 12 / 24 1.5A 2A

ST-2406-3AQ 6 / 12 / 24 2.5A 3A

ST-2406-5AQ 6 / 12 / 24 4A 5A

ST-2406-7AQ 6 / 12 / 24 7A 7.5A

ST-2406-10AQ 6 / 12 / 24 9A 10A

SA-025Q Multipurpose timer

SA-026Q Mini programmable timer

ST-UV16-W50Q 16VAC/50VA




ST-UVDA-W100Q 24/28 VAC/100VA

ST-UVDA-W180Q 24/28 VAC/180VA

• Triggered by positive voltage

or opening of dry contact• Adjustable from 1 second to 60

minutes• Form C relay•

• 3⁄16”x29⁄32”x5⁄8• Adjustable from 1~180

seconds• • Form C relay

• Convert low-voltage AC input to low-voltage DC output power

• • Short-circuit protection• • Switches to backup battery automatically in case of

power loss

• 12/24 VDC Operation•

Form C relay• 12/24 VDC Trigger•

• 6/12 VDC Operation• • 6/12 VDC Trigger• Large terminal blocks for

easy installation

• 12/24 VDC Operation• • 12/24 VDC Trigger• Large terminal blocks for

easy installation

• 12/24 VDC Operation• • • 3~24 VDC Trigger• Large terminal blocks for

easy installation

• 12/24 VDC Operation• High-sensitivity, low-voltage

trigger•

relays• 3~24 VDC Trigger

• •

chargers• Shielded windings reduce electromagnetic

interference

ST-2406-10AQ ST-2406-2AQ

ST-BD01Q Low battery cutoff

SS-077Q• N.C. Latching panic buttonSS-078Q• N.O. Latching panic buttonSS-078KEY• Extra key for SS-077/078

SS-040Q/W• N.C. Vibration/shock sensor• Adjustable sensitivitySS-040Q/BR• Same as SS-040Q/W,

but brown

SS-072Q• For N.C. Tamper circuitsSS-073Q• For N.O. Tamper circuits

SS-074Q/BG• N.O. Double-button

momentary hold-up switch

SS-075Q• N.O. “Emergency” buttonSS-075CQ• NO/NC “Emergency” button

SS-075C-PEQ• Emergency & push-to-exit

N.O. or N.C. (selectable) momentary contact

• Three labels included

SS-076Q• Toggle switch• Available in gray or white

SS-032Q/RD• Red N.O. buttonSS-033Q/BK•

SS-202Q• Foil connection block

• • 12/24 VDC Operation (selectable)• Adjustable voltage cutoff and restore point• Green LED AC indicator and 2-color LED DC

indicator

• Audio discriminator•

environmental noise• When ceiling-mounted, the detector will protect a

• • 2-Amp dry contact relay

ENFORCER 190 Glass-break detector

SA-025EQDelayed egress timer, see pg. 18 for more info

SA-027HQProgrammable annual timer,see pg. 18 for more info

SA-027WQProgrammable 7-day timer,see pg. 18 for more info

22

SM-4201-LQ 3” Gap, N.C.

SM-4601-LQ 3” Gap, N.C.

SM-4601-L3Q 3” Gap, NO/NC

SM-226LQ 2¾” Gap, N.C.

SM-226L-3Q 2¾” Gap, NO/NC

SM-226RQ 2¾” Gap, N.C.

SM-226R-3Q 2¾” Gap, NO/NC

• Rugged aluminum housing• • 36” (91.44cm) Leads enclosed in armored cable• 3” (76.2mm) Gap• 9⁄16”x2¾”x1¾

• Rugged aluminum housing• Weatherproof and sealed for outdoor use• 36” (91.44cm) Leads enclosed in armored cable• 3” (76.2mm ) Gap• 1⁄16”x1”x½

• Overhead door surface mount• Gold and deactivated rhodium plating for longer life

and reliability•

cast-aluminum housing•

L-shaped bracket• 24” (61cm) Leads enclosed in stainless-steel cable• 2¾” (70mm) Gap• 3⁄8”x1¾”x7⁄16” (111x44x11 mm)

Also Available:•

• • 24” (61cm) Leads enclosed in stainless-steel cable• 2¾” (70mm) Gap• 3⁄8”x1¾”x7⁄16” (111x44x11 mm)

SM-431-TQ/B 1” Gap, N.C., Brown

SM-431-TQ/W 1” Gap, N.C., White

SM-4004-TQ/W ¾” Gap, N.C., White

SM-4004-LQ/W ¾” Gap, N.C., 18” wire, White

SM-204Q/BR 1” Gap, N.C., Brown, Center

SM-204Q/W 1” Gap, N.C., White, Center

SM-205Q/BR 1” Gap, N.C., Brown, side

SM-205Q/W 1” Gap, N.C., White, side

SM-433-TQ/B 17⁄32” Gap, N.C., Brown

SM-433-TQ/W 17⁄32” Gap, N.C., White

SM-200Q/BR ¾” Gap, N.C., Brown

SM-200Q/W ¾” Gap, N.C., White

SM-216Q/BR 2¾” Gap, N.C., Brown

SM-216Q/GY 2¾” Gap, N.C., Gray

SM-217Q/W 2” Gap, N.C., WhiteSM-300Q/BR ¾” Gap, N.O., Brown

SM-300Q/W ¾” Gap, N.O., White


• Gold-plated terminals for longer life and reliability

• Screw mount using side

mount• • • 3⁄8”x¼

• Standard surface-mount• Gold and deactivated rhodium

plating for longer life and reliability

• Screw terminals for quick installation

• Includes terminal cover• ¾” (19mm) Gap• ½”x9⁄16”x½

• • Gold and deactivated rhodium

plating for longer life and reliability• Screw terminals for quick

installation• Includes spacers• 2¾” (70mm) Gap• 15⁄16”x½”x9⁄16” (100x13x14mm)

• windows

• Gold and deactivated rhodium plating for longer life and reliability

• Wide gap, yet contact is no longer than conventional surface type

• Concealed screw terminals for quick installation• • ½”x9⁄16”x½

• • Gold and deactivated

rhodium plating for longer life and reliability

• Screw mount using

(double-sided tape included)• Flange breaks off for extra

miniature size• • • Dimensions 13⁄8”x3⁄8”x¼

• with side leads instead of center leads

• N.O. circuits instead of N.C.

• surface mount


• Quick-connect terminals• Adhesive mounting (double-sided tape included)• ¾” (19mm) Gap• 3⁄8”x¼

• but with 18” (46cm) leads

• Gold-plated terminals for longer life and reliability• Cover hides mounting screws, terminal block, and

wires• Screw-mount (mounting

screws included)• For N.C. circuits• 17⁄32” (31mm) Gap• 9⁄16”x½”

• but without mounting tabs

23

SM-4103-TQ/W ½” Gap, N.C., White

SM-266/BR 1¼” Gap, N.C., Brown

SM-4301-TQ/W N.C., White

SM-4302-LQ/W N.C., Wire leads, White

SM-4303-TQ/W N.C., Quick-connect, White

SM-206Q/BR 1” Gap, N.C., Brown

SM-206Q/W 1” Gap, N.C., White

SM-207-41/GY 1¾” Gap, N.C., Gray

SM-207-31/BR 1” Gap, N.C., Brown

SM-4105-LQ/B 1” Gap, N.C., Brown

SM-4105-LQ/W 1” Gap, N.C., White

• •

contained in housing• Spacer and screws

included• Quick-connect terminals• ¼

• ¾” (19mm) Steel door recessed contact• Gold-plated terminals for

longer life and reliability• Strong, one-piece

construction• Switch and magnet have

ribs for securing in hole• Quick-connect terminals• • 7⁄16”x3⁄8

• 18” (46cm) leads

• ¼” Recessed mount with leads• For N.C. circuits • Available in brown or white• • ¼”x¼” (32x6 mm)

• ¼• •

1¼”x3⁄8” (32x9 mm)

• 3⁄8• 13/4

• 1¼”x3⁄8” (32x9 mm)

• but with 18” (46cm) leads and with ¾” (19mm) switch

• 360° Rollerball• Quick-connect terminals•


included• Roller travel is ¼

• 360° Rollerball• 18” (46cm) Leads•


included• Roller travel is ¼

• N.C. Super-thin screen mount with leads.

• 11/4” (32mm) Gap•

2”x1⁄8”x1⁄8

SM-831• 11/4” x 1/4” (32x6 mm) Diameter•

SM-841• 1 /8” x 3/8” (41x10 mm) Diameter•

SM-851Aluminum Z-bracket for SM-216Q

SM-852LAluminum L-bracket for SM-226LQ


SM-4103-LQ/W 1” Gap, N.C., White

• 3⁄8


• Rare-earth magnet with nickel plating to protect against chipping and corrosion

• Switch has ribs for securing in hole• Quick-connect terminals• For N.C. circuits• ½” (13mm) Gap• 15⁄16”x7⁄16”x3⁄8” (24x11x9 mm)

SM-207Q/BR 1” Gap, N.C., Brown

SM-207Q/W 1” Gap, N.C., White

SM-207-5Q/BR 3⁄8” Gap, N.C., Brown,Stubby switch/magnet

SM-207-5Q/W 3⁄8” Gap, N.C., WhiteStubby switch/magnet

SM-207-5LQ/BR 1” Gap, N.C., Brown,Stubby switch/magnet

SM-207-5LQ/W 1” Gap, N.C., White,Stubby switch/magnet


SM-407-5TQ/W ¾” Gap, N.C., White


• Unique glue/epoxy compound protects reed switch

• Switch and magnet have ribs for securing in holes• • • 3⁄8”x7⁄16”x3⁄8


• Unique glue/epoxy compound protects reed switch

• Switch and magnet have ribs for securing in holes• • For N.C. circuits• 3⁄8” (10mm) Gap• ¾”x7⁄16”x3⁄8” (19x11x9 mm)

• with long magnet 13⁄8


• Switch and magnet have ribs for securing in holes

• Quick-connect terminals• For N.C. circuits• • 1⁄8”x7⁄16”x3⁄8” (28x11x9 mm)

• 3⁄8• Gold-plated terminals for

longer life and reliability• Switch and magnet have

ribs for securing in holes• Quick-connect terminals• ¾” (18mm) Gap• 7⁄16”x3⁄8

24

• Simple 2-wire connection• Low current draw with long operating life of over 300

• high-voltage xenon tube when lens cover has been removed

• Lens is made of high-impact resistant acrylic• Optional conduit mounting bracket available• Choice of amber, blue, clear, green, or red lenses.

Replace “XOptional Conduit Mounting Bracket:• All conduit box or conduit drop bracket

are interchangeable. See below for more information

• • Choice of amber, clear, blue, or red lens• • • • Operating life of over 100,000 hours of continuous

use (11 years)

• • • Surface-mount, or mount in ¾”

(19mm) hole of alarm panel or remote plate

•

• Simple 2-wire connection• • Less heat generated than xenon-tube strobe light• 9-Volt backup battery option for continuous

operation during power failure• Indoor/outdoor use• Lens is made of high-impact resistant acrylic• Optional conduit mounting bracket available• Choice of amber, blue, clear, green, or red lenses.

Replace “X

SL-1301-BAQ series:• Same as SL-1301-EAQ series, but with 20

option for continuous operationSL-1301-SAQ series:•

programmable LEDs and programmable siren

Optional Mounting Bracket:• All conduit box or conduit drop bracket

are interchangeable. See below for more information

SL-126Q/X 6~12 VDC Operation

SL-126-A24Q/X 6~24 VDC Operation

SL-1301-EAQ/X 15-LED, 6~12 VDC

SL-1301-BAQ/X 20-LED, 6~12 VDC

SL-1301-SAQ/X 54-LED, 10~24 VDC, Siren

SL-1311-MA High-intensity LEDs

SH-504Q 85dB Buzzer

SL-126LQ/XReplacement lens – Available in amber, blue, clear, green, and red. To order replace “XSL-1901-DAQConduit drop bracket, Can be used with SL-1901-JAQ

SL-1901-JAQConduit box bracket, Can be used with SL-1901-DAQ

E-921CPQ Voice dialer with listen-in

E-921APQ Basic auto dialer

• Delivers messages of up to 20 seconds to each

• Listen-in and broadcast. Controllable by telephone• 3 N.C. Triggers•

power failure• • • • Remote monitoring – call-in to listen-in, broadcast,

arm and disarm

• Call recipient will hear “beep” sounds to indicate sensor triggered

• numbers (up to 32 digits)

• 2 N.C. triggers•

to protect system data during power failure

• Listen-in and broadcast. Controllable by telephone• • • • Remote monitoring – call-in to listen-in, arm and

disarm

SL-S212 12-inch LED Strips

• - White (SL-S212/WAQ) - Red (SL-S212/RAQ) - -

• 12-LED Strips for informative or decorative applications

• 12VDC Operation• Each strip can be cut to varying lengths depending

on the application• Connect up to 30 strips in series• Requires one power connector

Optional Accessories:• • SL-SAS-EC1Q – End cap• SL-SAS-SH1Q – LED Strip fastener

SL-SAS-PC1Q

SL-SAS-EC1Q

SL-SAS-SH1Q

(SL-126Q ONLY)

SH-532L 128dB Multi-tone siren

• • 1/4” long,

31/2” diameter• 6~12VDC Operation•

Optional Conduit Mounting Bracket:• All conduit box or conduit drop bracket are

interchangeable. See below for more information• Compatible with all SL-126 and SL-1301 Series

Conduit drop bracket only

Conduit box only bracket with

conduit box

25

• Two four-button RF remotes• Flashing parking lights (built-in relay)• • • Starter-disable output• • • Instant triggering with multiple trigger inputs•

-unlock output, switch sensing, ignition lock/unlock

• Two 4-button “icon” RF remotes• Flashing parking lights (built-in relay)• • • • 7-Function LED • Domelight supervision •

• Use on vehicles with cloth or open tops, or open sunroofs

• Dual-stage protection – chirps if someone gets too close to the car or if there is a break-in/vandalism attempt

• Upgrades factory keyless entry systems by adding a complete security system

• Disarm defeat input prevents thieves from using the car’s unlock switch to disarm alarm

• • Starter disable output

• Use touchkey to disarm alarm• Two touchkeys included• Attractive backlit receptacle• Auto arm/disarm• • Valet/override mode

• 1080p HD Video recording• 140° Wide viewing angle• Wide Dynamic Range (WDR) – captures clear

images even in strong backlight• • Remove from mount and use as a camera to take

still images• Store images and video on micro SD card (up to

• • • • •

• Arm/disarm automatically• Two proximity keys included• Two on-board relays for

disabling the starter, ignition, or fuel pump

• Installer test mode helps determine best position for the sensing coil

• • No valet switch needed

• Two 3-button RF remotes• Flashing parking lights (built-in relay)• • • • •

- Active/passive arming, 0.4/6.4-second door lock/unlock output, chirp/no chirp, NO/NC trigger input, permanent disarm or automatic rearm, current and/or switch sensing, ignition lock/unlock ON/OFF, automatic starter disable ON/OFF

E-100LB Entry-Level Alarm

SLI® 840 High Keyless Entry Alarm

SS-061LSNEuropean-Style Pin Switch

SS-066TLStyle Pin Switch

SLI® 259A Dual-stage Microwave SensorSLI® 820R Keyless Entry Upgrade

SLI® 820RA Same as SLI 820R, no SirenE-300L Full-Featured Alarm

SLI® 762FP-ISS Touchkey Immobilizer

SLI® 762PP-ISS Passive Proximity Immobilizer

DC-200GQ 1080p Dashboard Camera

DC-ACC-CS1Q Cigarette lighter adapter socket

• Dual-stage protection – chirps if someone gets too close to the car or if there is a break-in/vandalism attempt

• Includes remote microphone with 3ft cable for easy mounting and concealing inside the car.

• Chirps siren on light tap of window, triggers alarm on break-in

SS-052B Dual-stage Electromagnetic Shock Sensor

• Allows nearly any alarm to control nearly any type of power-door lock/unlocks.

• Includes two pre-wired, built-in, heavy-duty 30-Amp relays with protecting diodes and spike/noise suppressors

SR-5201R Power Door Lock Interface

SS-051ME Dual-Stage Glass-break Sensor

X-187-037-1SC Relay• Heavy-duty automotive relay•

• European-style pin switch

• long, steel body

• shaft

• Stainless-steel contact terminal

• Clean installation of accessories directly to fuse box

• Frees up existing cigarette lighter socket

26

®

®

®

®

MVE-AT11-W1NQ

MVE-AT11-01NQ

®

®

®

®

•

• Includes bi-directional IR for remote control extension

• • ARC/Digital Audio Out for integration with existing

sound systems• • Supports resolutions from 480i to 1080p•

• • Includes bi-directional IR for remote control

extension• Signals can pass through walls• • Supports resolutions from 480i to 1080p with zero

signal loss•

MVE-AH010Q Range: Up to 195ft (60m) MVE-AT11-01NQ Desktop ExtenderRange: Up to 230ft (70m)

MVE-AT11-W1NQ Wallplate ExtenderRange: Up to 230ft (70m)

MVE-AT11-02NQ Desktop Extender with EthernetRange: Up to 330ft (100m)

MVE-AT11-W2NQ Wallplate Extender with EthernetRange: Up to 330ft (100m)

MVE-AH030Q Range: Up to 195ft (60m)

MVE-WH010Q Range: Up to 98ft (30m)

MVE-PN11-01Q IR over HDMI Kit

•

• • Supports resolutions from 480i to 1080p with zero

signal loss• Supports EDID, EID, and hot plug detection•

•

• Includes bi-directional IR for remote control extension

• • Supports resolutions from 480i to 1080p• The tabletop and wall-plate models are compatible

with each other – mix and match the transmitter from one model to the receiver of the other

• • MVE-AT11-02NQ and MVE-AT11-W2NQ Only:•

up to 330ft (100m) at 1080p over a single

• switch

•

• Supports resolutions from 480i to 1080p and 3D video

• Includes remote control for switching between inputs• • Switch will automatically select the active input for

added convenience• •

•


• • •

•


• • •

MVS-AH41-01NQ 4 Inputs, 1 output

MVD-AH14-01NQ 1 Input, 4 outputs

MVM-AH44-01YQ 4 Inputs, 4 outputs

• Add IR remote pass-through to installations where

• Discreet, convenient design – adapters install

•

27

®

LIFETIMEWARRANTY

®

®

®

MVD-V1201-1Q

MVE-PC015Q MVE-PCW15Q

MC-2201QMC-2101Q

• 3D Support• 4K Support• Up to 1080p• • Category 2 cable• Lifetime warranty

MVD-V1201-1Q 1-In, 2-out (1 local, 1 remote)

MVD-V1501-1Q 1-In, 5-out (1 local, 4 remote)

MVD-V1101-1RQ Additional receiver

MVE-PC015Q Desktop model

MVE-PCW15Q Wallplate model

MC-1102-18NQ 1.5ft (0.5m), 28AWG

MC-1102-03FQ 3ft (1m), 28AWG

MC-1102-06FQ 6ft (1.83m), 28AWG

MC-1102-10FQ 10ft (3m), 28AWG

MC-1102-16FQ 16ft (5m), 28AWG

MC-1102-20FQ 20ft (6m), 26AWG

MC-1102-25FQ 25ft (7.6m), 26AWG

MC-1102-30FQ 30ft (9m), 26AWG

MC-1102-50FQ 50ft (15m), 26AWG

• Extends VGA signals up to 984ft (300m) at 1920x1200

cables•

– comes as a complete set• Supports resolutions from

640x480 to 1920x1200• •

• Same as

(1 local, 4 remote)

•

• Supports resolutions from 480i to 1080p

• • Supports resolutions from 640x480 to 1280x1024• •

•

cable• Works with CATV, satellite

receivers, RF splitters and

• • • •

frequency• Sold in pairs

• • Supports input resolutions up to 1920x1080• Supports up to 1920x1080 on VGA output• Stereo audio output•

• signals up to 328 ft (100m) over single coax cable

• • Supports up to 1080p

resolution

• Transmits VGA signals

1280x1040 resolution

cable •

– no external power required• Supports resolutions from 640x480 to 1280x1040•

•

• • • Supports resolutions from 480i to 1080p•

MVA-VH01Q VGA & Stereo to HDMI Converter

MVA-HV01Q HDMI to VGA Converter

• Extends DVI signals up to 160ft

cable•

– comes as a complete set• Supports resolutions from 480i to

1080p with zero signal loss•

included

MVE-AD11-01Q Range: Up to 160ft (50m)

MVE-AH11-01NQ HDMI over Coax

MVR-HH01Q Range: Up to 115ft (35m)

MVE-SV010Q Range: Up to 160ft (50m)

MVE-PA11-01Q CATV over Cat5e/6

• • Gold-plated contacts•

MC-2201Q Female-to-female

MC-2101Q 180° Swiveling male-to-female

2015 SLI MiniCate 140909a - surveillance-video.comEV-6680-N3WQ Programmable, motion-activated LED,...

Documents

Transcript of 2015 SLI MiniCate 140909a - surveillance-video.comEV-6680-N3WQ Programmable, motion-activated LED,...