2015 PalmCommitment Brochure - Creations...

4
Sustainable Sourcing BASF Palm Commitment

Transcript of 2015 PalmCommitment Brochure - Creations...

Page 1: 2015 PalmCommitment Brochure - Creations Newslettercreationsnewsletter.com/resources/issue12/pdfs/2015_BASF_Palm... · 4. e will support the physical transformation of the market

Sustainable Sourcing BASF Palm Commitment

Page 2: 2015 PalmCommitment Brochure - Creations Newslettercreationsnewsletter.com/resources/issue12/pdfs/2015_BASF_Palm... · 4. e will support the physical transformation of the market

At BASF, we create chemistry – and have been doing so for 150 years. BASF contributes to sustainable

development by delivering innovative solutions that give millions of people all over the world a better quality of life, while at the

same time using natural resources as efficiently as possible and minimizing the company’s impact on the natural environment.

A key renewable raw material is palm kernel oil and its respective derivatives, which we mainly use to produce home and

personal care ingredients. Oil palm plantations can contribute significantly to deforestation, loss of biodiversity and climate

change from the loss of peatland. We share the widespread concern about these challenges and are committed to reducing

the impact on the environment.

BASF Commitments:BASF wants to ensure that its renewable-based products are made from sustainably sourced raw materials.

1. We will integrate additional forest conservation requirements regarding high carbon stock and peatland into our palm sourcing policy (defined by High Carbon Stock*). Additionally, we will incorporate requirements for a Free, Prior Informed Consent (FPIC) process into our sourcing policy.

2. We will work with key stakeholders and stakeholder forums to define traceability in a way that supports reduction of unsustainable palm oil and thus helps to stop deforestation.

3. We commit ourselves to using raw materials that are both RSPO-certified (MB/SG) and traceable – this applies to palm oil and palm kernel oil, as well as palm fractions and derivatives.

a. In continuation of our commitment made in 2011, BASF’s goal is to source only RSPO-certified sustainable palm oil and palm kernel oil.

b. BASF will establish and incorporate upstream traceability for palm oil and palm kernel oil by 2020.

c. BASF will expand its commitment to only source RSPO-certified sustainable raw materials with upstream traceability for palm oil and palm kernel oil fractions and primary palm and palm kernel oleochemical derivatives and edible oil esters by 2025.

4. We will support the physical transformation of the market towards sustainable palm oil and palm kernel oil in our supply chain and in the market.

5. We will use our resources to provide forums on the complexities of palm oil for our partners and stakeholders to highlight the need to work together to achieve sustainability.

6. We are targeting smallholder inclusion by supporting appropriate smallholder projects.

7. We will continuously report on our progress based on the defined timetable.

*new plantings shall be done in accordance with the HCS Approach Toolkit, until an industry-wide methodology has been adopted.

Page 3: 2015 PalmCommitment Brochure - Creations Newslettercreationsnewsletter.com/resources/issue12/pdfs/2015_BASF_Palm... · 4. e will support the physical transformation of the market

Highlighted Products

Offerings:Sustainable Statements

Exclusively from BASF, sustainable statements provide an assurance that products are produced from certifi ed sustainable palm based raw materials and/or from coconut.

Mass Balance

The mass balance supply chain model allows for mixing of certifi ed sustainable raw materials and conventional raw materials. With mass balance, calculations replace a fully separated production process. All North American BASF lauric oil sites are RSPO certifi ed.* (rspo.org)

Segregated

The segregated supply chain model assures that RSPO certifi ed oil palm products delivered to the end user comes only from RSPO certifi ed sources. Certifi ed palm oil is physically separated from non-certifi ed palm oil all the way from the mill to the end user.* (rspo.org)

Product INCI

Sus

tain

able

S

tate

men

ts

Mas

s B

alan

ce

Cetiol® CC Dicaprylyl Carbonate

Cutina® AGS Glycol Distearate

Cutina® GMS V Glyceryl Stearate

Dehyton® ML NA Sodium Lauroamphoacetate

Dehyton® PK 45 NA Cocamidopropyl Betaine

Emulgade® CM

Cetearyl Isononanoate (and) Ceteareth-20 (and) Cetearyl Alcohol (and) Glyceryl Stearate (and) Glycerin (and) Ceteareth-12 (and) Cetyl Palmitate

Emulgade® 1000 N

Emulgade® 1000 DCetearyl Alcohol (and) Ceteareth-20

Eumulgin® B 2 Ceteareth-20

Euperlan® PK 3000 AMGlycol Distearate (and) Laureth-4 (and) Cocamidopropyl Betaine

Eutanol® G Octyldodecanol

Glucopon® 420 UP

Glucopon® 425 N

Isopropylpalmitate Isopropyl Palmitate

Lamesoft® PO 65 Coco-Glucoside (and) Glyceryl Oleate

Lanette® O Cetearyl Alcohol

Lanette® 18 DEO Stearyl Alcohol

Plantaren® 818 N UP Coco-Glucoside

Plantaren® 2000 N UP Decyl Glucoside

Texapon® N 70 NA Sodium Laureth Sulfate

Texapon® LS 30 NA Sodium Lauryl Sulfate

* Additional products & certifi cations, including select segregated products, available upon request.

Page 4: 2015 PalmCommitment Brochure - Creations Newslettercreationsnewsletter.com/resources/issue12/pdfs/2015_BASF_Palm... · 4. e will support the physical transformation of the market

BASF CorporationHome and Personal CareNorth America100 Park AvenueFlorham Park, NJ 07932www.basf.com/care-chemicals

THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED HEREIN ARE PRESENTED IN GOOD FAITH, AND ARE BASED ON BASF’S CURRENT KNOWLEDGE AND EXPERIENCE. THEY ARE PROVIDED FOR GUIDANCE ONLY, AND DO NOT CONSTITUTE THE AGREED CONTRACTUAL QUALITY OF THE PRODUCT OR A PART OF BASF’S TERMS AND CONDITIONS OF SALE. BECAUSE MANY FACTORS MAY AFFECT PROCESSING OR APPLICATION/USE OF THE PRODUCT, BASF RECOMMENDS THAT THE READER CARRY OUT ITS OWN INVESTIGATIONS AND TESTS TO DETERMINE THE SUITABILITY OF A PRODUCT FOR ITS PARTICULAR PURPOSE PRIOR TO USE. IT IS THE RESPONSIBILITY OF THE RECIPIENT OF PRODUCT TO ENSURE THAT ANY PROPRIETARY RIGHTS AND EXISTING LAWS AND LEGISLATION ARE OBSERVED. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH HEREIN, OR THAT THE PRODUCTS, DESCRIPTIONS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. ANY DESCRIPTIONS, DESIGNS, DATA AND INFORMATION GIVEN IN THIS PUBLICATION MAY CHANGE WITHOUT PRIOR INFORMATION. THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATION FURNISHED BY BASF HEREUNDER ARE GIVEN GRATIS AND BASF ASSUMES NO OBLIGATION OR LIABILITY FOR THE DESCRIPTIONS, DESIGNS, DATA OR INFORMATION GIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT THE READER’S RISK.

© 2015 BASF

® = registered trademark of BASF Group.

BF-00000 10/15