2015 - Magnate · PDF fileCNC routers equipped with an automatic tool change system can change...

1

2015 Summer Catalog

INTELLIGENT WOODWORKING

Company Overview

Why CNC?

Why Legacy?

Our Staff

ExplorerThe Personal CNC System

ArtyThe Small Business CNC system

CriterionThe Cabinetmaker CNC system

Artisan IIThe Complete CNC system

2

Table of Contents

3 10

412

6

7 14

8

Terms and Conditions

Bridging the Skills Gap

Machine Comparison Table

Sofware Comparison Table

Spindle Comparison Table

Customer Showcase

Customer Comments

3

Company OVERVIEWFor the past 25 years Legacy Woodworking Machinery has been building tools and machines for the home shop and professional woodworkers alike. Our current product line includes products for home shops, small woodworking businesses, cabinetmakers, sign makers, and furniture builders. Our staff includes experts in CAD/CAM software and CNC operations as well as setup and applications.

We look forward to answering your questions and providing any assistance you may need as you explore the exciting new frontiers of CNC woodworking.

16 21

18 22

20

21

23

ACCURACYCNC routing systems holds tolerances measured in thousandths of an inch, reducing waste and assembly time. Whether building one piece or one thousand pieces and they will all be exactly the same.

DECREASED HANDLING TIME, CONSOLIDATE PROCESSESThe traditional approach to woodworking breaks the process into multiple steps. Such as: 1) cutting material to size on a panel saw or cabinet saw; 2) adding rabbets and dados on a different saw or after changing blades; 3) adding adjustable shelf holes using a drill jig or boring machine; 4) possibly adding drawer hardware using a jig or template to locate the screw or hinge hardware holes. The CNC approach combines all these processes into a single operation. Sheet goods can be cut down to size, dados, rabbets, shelf pin holes, hinge hardware and drawer hardware holes can be cut, drilled or milled while handling the sheet only once. Dovetail drawers can be produced from sheet goods in a single step. One operator loads the material, starts the milling cycle, and changes tools when necessary. CNC routers equipped with an automatic tool change system can change tools when required, freeing the operator to work on additional tasks while the CNC system cuts the parts to size and adds the additional features mentioned previously. When the material processing is complete the operator removes the finished parts and starts the process again.

CNCM I L L I N GS y s t e m s

WHY CNC?

PRODUCTIVITY

There are three primary benefits to adding a Legacy CNC woodworking

system to your shop; which are increased productivity, new market

opportunities and a safer shop environment.

Writing Instrument created by

Anthony Turchetta

Dining table created by Harry Tippetts, Utah

4

ACCURACYCNC routing systems holds tolerances measured in thousandths of an inch, reducing waste and assembly time. Whether building one piece or one thousand pieces and they will all be exactly the same.

DECREASED HANDLING TIME, CONSOLIDATE PROCESSESThe traditional approach to woodworking breaks the process into multiple steps. Such as: 1) cutting material to size on a panel saw or cabinet saw; 2) adding rabbets and dados on a different saw or after changing blades; 3) adding adjustable shelf holes using a drill jig or boring machine; 4) possibly adding drawer hardware using a jig or template to locate the screw or hinge hardware holes. The CNC approach combines all these processes into a single operation. Sheet goods can be cut down to size, dados, rabbets, shelf pin holes, hinge hardware and drawer hardware holes can be cut, drilled or milled while handling the sheet only once. Dovetail drawers can be produced from sheet goods in a single step. One operator loads the material, starts the milling cycle, and changes tools when necessary. CNC routers equipped with an automatic tool change system can change tools when required, freeing the operator to work on additional tasks while the CNC system cuts the parts to size and adds the additional features mentioned previously. When the material processing is complete the operator removes the finished parts and starts the process again.

Work Force MultiplierBecause CNC routing is so efficient, one operator is often able to operate several machines at a time. CNC systems operate without supervision. Your CNC will work while you work on another task or even while you are in another room or having coffee. Our customers often set up long carvings at the end of the work day and let the machine work the second shift alone. Imagine making money while you sleep.

Eliminate human error on the shop floorEach new step of the woodworking process requires an additional setup operation and each new setup is an opportunity for error. Each new step may also require an additional operator.

Legacy’s hybrid CNC systems allow you to quickly move from carving a panel or embellishing a spindle, to cutting parts to size so you can….

INTRODUCE NEW PRODUCT LINESCNC systems of the past only processed sheet goods. Today’s CNC woodworking systems can create 3D carved moldings, mill complex joinery like dovetail drawers and boxes, and even produce intricate spindles allowing you to offer new embellishments, upgrades, and products without hiring highly skilled and expensive new employees.

OFFER NEW SERVICESMany owners of CNC woodworking systems use the increased capacity of their shops to produce parts for other cabinetmakers, furniture builders, and specialty woodworking outlets.

PRODUCE VALUE ADDED EMBELLISHMENTSIn a highly competitive world you want to be able to add that extra “bling” factor. Something that sets you apart from the rest of the pack. That may be carved columns on a kitchen island, corbels to support a bar counter top, or ornate moldings added to a home

theater. Today’s CNC systems will allow you to add this type of embellishment easily, quickly, and affordably.

PRODUCE EXPENSIVE OUTSOURCED INVENTORY ITEMS IN HOUSEPerhaps you’ve been adding those extra embellishments by outsourcing your spindles and moldings. Some specialty moldings cost in excess of $100/ft. Put that money in your own pocket by building your own moldings, spindles, corbels, and inlays.

SAFETYHANDS FREE AND CLEAR FROM ALL CUTTING TOOLSThis item should probably be at the top of the benefits list. Lathes, shapers, table saws, and router tables all require the operator to get up close and personal. Many safety features have been added to these machines in an effort to protect the operator but nothing beats stepping back and letting the CNC system do the job while you are far from the cutting tools. In fact you can leave the room while your CNC system works if you like.

LESS LIFTING AND HANDLINGPanel saws require a lift and twist action to load sheet goods. Table saws require the operator to lift large and heavy sheet goods on and off the table. With today’s CNC system the operator slides materials from the bunk to the machine table with little lifting or twisting. Less back strain, less fatigue, less operator downtime.

LOW RPM SPINDLE PRODUCTIONFew woodworkers think of turning with a CNC routing system but it has many advantages. Unlike the traditional lathe the material rotates slowly while rotary cutting tools remove material and shape the spindle. This low rpm approach prevents spindle whip, and other typical lathe problems and accidents.Another advantage is you can produce any type of spindle from a traditional turning to a complex carved asymmetrical shape like a ball and claw foot. Again without hiring an expensive, highly skilled new employee.

EXPANDED MARKET OPPORTUNITIES

Stair railing created by Mark Davis, California

Dining table, designed and built by

Frederick Haas, Florida

5

VISIONARY MULTI-FUNCTION CNC SYSTEMSThe CNC systems of the past have been dedicated to processing sheet goods. They do it very well but that is all they do. Legacy’s approach is to build multi-function equipment that will maximize your investment dollar. Our systems combine milling, spindle production and joining operations.

COMMITMENT TO YOUR SUCCESSWhether you are a one man shop or a large production facility, Legacy is committed to your success. We support our customers with training and support after the sale, and we’ve pioneered new milling techniques and software to increase your productivity and profitability.

FREE FACTORY TRAININGEvery customer receives free training at the factory. Our two day course covers basic CNC operations, introduction to CNC programing, and an introduction to the CNC turning process.

TRAINING PROJECTSThe learning by doing method is one of

the fastest ways to incorporate CNC into your woodworking operation. Legacy provides beginning level projects as well as expert level training projects to guide you through the learning process.

WEEKLY COACHING SESSIONSLegacy hosts weekly webinar sessions on CAD/CAM programs like ArtCAM Express, ArtCAM Pro, VCarve Pro, and Aspire. We also teach classes on our own turning software, CCAM, to insure that you are ready to take full advantage of our multi-purpose CNC

systems. These web based classes can be attended from anywhere in the world with internet access. You can interact with the instructors, ask questions and get advice from our CNC programming experts. Every class is recorded and archived for future reference and to help with your accelerated personal training.

TRADE-UP PROGRAMLegacy’s trade up program is unique in the CNC world. It’s very simple, if you outgrow your Legacy CNC system you can trade up to a larger system. Legacy offers 5 different CNC systems in over 15 different frame sizes.

MADE IN THE USAAll Legacy CNC systems are manufactured in Springville, Utah. We build all our systems to order and can customize your CNC system to fit your exact needs. Stop by for a personal test drive and tour of our facility if you are in the area.

I N T E L L I G E N T

W O O DW O R K I N G

WHY LEGACY

EXPERIENCE

Legacy Woodworking Machinery has been producing woodworking systems for over 20 years. We’ve

worked with some of the best in the business. This experience makes us uniquely qualified machine builders.

Legacy Training Projects

6

JOHN, SALESJohn has extensive experience in woodworking, CAD/CAM, and CNC operations. His specialty is 3D design and millwork.

CHRIS, SALESChris has extensive experience in CAD, he’s our in house TurboCAD expert; as well as CAD/CAM, and ConCAM. His specialty is turning, rotary carving, and spindle production.

TRACY, CUSTOMER SERVICETracy is our software developer, and chief of customer service. He coordinates the customer support team and produces our training program.

CINDY, PRODUCTION COORDINATORCindy takes over after the sale, she coordinates the production and shipping schedule of our CNC systems. She also coordinates customer training and hosts our factory training sessions.

ANDY, OPERATIONS MANAGERHovering around in the background is Andy, responsible for machine tool design and general operations. If you need your CNC system customized or a specialty machine built to order you’ll be working with Andy.

OUR STAFFJeremy Tippetts, Mold for cast sign, Utah

Gothic twist newel post, Carl Tourigney Florida

7

JOINING SYSTEMThe Explorers joining system includes both a panel joining system and a mitered fence system to allow the operator to create difficult furniture joints. The work table can be adjusted from vertical to the horizontal position allowing the operator to extend the machine work table or position it for angled joinery. Mortise and tenon joints can be milled straight or angled, also the work table and the fence angles can be combined to create compound angle mortise and tenons.The dining chair shown above was built using the turning center to mill the four sculpted legs, the mortise and tenon joinery, to mill the back splat and curved

EXPLORER PERSONAL CNCSYSTEMThe Explorer CNC system in not a lightweight toy built for weekend amusement. Designed for a serious woodworker its framework is built of 1/8 inch folded steel panels. The frame and gantry are welded, not bolted together, to withstand years of continuous motion and stress. It can be used on a workbench or supplied with a floor stand as shown here. The Explorer is controlled by your PC or laptop computer using a customized version of Mach3 motion control software.

Shown with 2 1/4 HP router.8

WORK TABLE SIZE OPTIONS:25 X 25 inches with 3.5 in Z stroke25 X 50 inches with 3.5 in Z stroke

CONTROL OPTIONS:Machine home, operator setup or automated setup. Smart Tool, router bit height measurement system for faster tool changes and reduced setup time.

SPINDLE OPTIONS:2 1/4 fixed base router or3HP 220vac whisper quiet liquid cooled spindle

POWER REQUIREMENTS:Router system, 110VAC, 15 amp serviceSpindle, 220VAC, 15 amp service

DUST COLLECTION:An optional dust pickup system built for a 4 inch dust collection system is available.

JOINING SYSTEMThe Explorers joining system includes both a panel joining system and a mitered fence system to allow the operator to create difficult furniture joints. The work table can be adjusted from vertical to the horizontal position allowing the operator to extend the machine work table or position it for angled joinery. Mortise and tenon joints can be milled straight or angled, also the work table and the fence angles can be combined to create compound angle mortise and tenons.The dining chair shown above was built using the turning center to mill the four sculpted legs, the mortise and tenon joinery, to mill the back splat and curved

back rest; as well as milling sliding dovetail joinery to attach the back rest to the chair stiles. Not a screw anywhere in the assembly. Traditional woodworking using 21st century technology at 21st century speed.

Hollow spiral candlesticks with silver cups and base, Bob Mower, Washington state.

Dining chair, designed and built by Andy as a training project.

EXPLORER, PERSONAL CNC SYSTEM

SPINDLE TURNING CENTERWith a turning capacity of 18 X 4 inches the Explorer turning center can be used for continuous lathe style turnings, indexed multi-sided legs, and for indexed spindle positioning for precisely positioned mortise and tenon or sliding dovetail joinery. The router position and spindle rotation can be combined to mill spiral twists or to wrap a 3D carving around your spindle project.

ONLINE SUPPORT SYSTEMLegacy utilizes an internet interface for system updates and diagnostics. Our support team can update your software, troubleshoot your programs, and even operate your machine remotely no matter where your shop is located.

ACCESSORY OPTIONS

9

ARTYHYBRID CNC MILLING & TURNING SYSTEMA multi-purpose machine that fits comfortably into a small shop. It has big shop features on a small shop budget.

These features include 2D milling, 3D carving, 5 axis spindle turning, inlay, joinery and 4 axis rotary carving.

The 25X58X5 work envelope with

integrated turning system. Also shown

is the 3HP liquid cooled spindle. 10

The Arty CNC has an integrated turning system with an articulated base to quickly and easily set up for tapered turning operations. It also comes with a large work area capable of milling cabinet panels, signs, or musical instruments.

This stand alone CNC system is built using 1/8 inch folded and welded steel panels.

The Arty CNC package includes a 15.6 inch screen laptop computer using modified Mach3 motion control software.

CAD/CAM and turning software sold separately.

WORK AREA ARTY MODEL 36:24 X 36 inch flat work area8 X 36 inch turning capacity5 inches of Z travel

WORK AREA ARTY MODEL 58:24 X 58 inch flat work area8X 58 inch turning capacity5 inches of Z travel

FRAME:Welded steel frameFloor stand20 mm round shaft linear bearingsX and Y axis Rack and Pinion driveZ axis Precision Acme screw driveNEMA 23 frame stepper motors

FEED RATE:X axis 400 inches per minuteY axis 400 inches per minuteZ axis 70 inches per minuteA Axis rotation at 50 RPM

TURNING 5TH AXIS:Manual taper adjustment5 degrees of taper travel

SMART TOOL:The automated tool measurement system measures each tool before use and adjusts tool offsets. Smart Tool can also be used to measure the thickness of flat stock.

SPINDLE OPTIONS:2 1/4 HP Bosch Router3 1/4 HP Porter Cable Router (reduces Y axis travel by 3 inches)3HP water cooled 220VAC spindle

POWER REQUIREMENTS:Router systems-110 VAC@20 amps3HP Water Cooled Spindle systems-220VAC@20 amps

SHOP FOOTPRINT:Shop space requirements: 4’ x 6’

TRAINING AND SUPPORT:1 day of FREE factory hands on training.Webinar style online training.

COMPUTER OPTIONS:A 15.5 inch Laptop is included, or

you may choose to use your own computer. If you choose this option you will need to ship your computer to the factory for a compatibility check, software installation, and a final systems test. (Legacy Woodworking Machinery is not responsible for lost files or personal information or any damage to your computer system when in transit).

INSTALLED SOFTWARE:Logmein software for remote diagnostics and software upgrades.Mach 3 CNC control softwareMicrosoft Essentials Anti-Virus Software

CAD/CAM SOFTWARE OPTIONS:ArtCAM Express • VCarve ProAspire • ConCAM 4.0

Sign post created by Ken Chambers

ARTY, HYBRID CNC MILLING & TURNING SYSTEM

Arty Specifications:

11

CRITERIONTHE CABINETMAKERS CNC SYSTEMDesigned for the cabinetmaker of the future, this rugged CNC system features a welded steel frame construction, closed loop servo drive motors, a manual tool change or automatic tool change option, and an optional 4 axis turning center.

12

Designed for the cabinetmaker of the future this rugged CNC system features a welded steel frame construction, closed loop servo drive motors, a manual tool change or automatic tool change option.

Quickly move between 2D sheet or stock processing, 3D relief carving, inlay, and cabinet door embellishment.

With the optional 4th axis turning center, spindles up to 10” in diameter and 42 inches long can be manufactured.

The optional joining system can be used for vertical panel joinery or to produce mitered cabinet door frames.

WORK AREA:50 X 50 inch flat work area or50 X 100 inch flat work area or60 X 120 inch flat work area with 7.5 inches of Z travel

FRAME:Welded steel frame20 mm linear profile rails and carriages bearingsX and Y axis-Rack and Pinion driveZ axis-Precision Ball Screw DriveClosed loop NEMA 34 frame servo drive motors


SMART TOOLThe automated tool measurement system measures each tool before use and adjusts tool offsets. Smart Tool can also be used to measure the thickness of flat stock.

SPINDLE OPTIONS:5HP air cooled 220VAC manual tool change spindle or 6HP ATC spindle with 6 position tool rack

11HP ATC spindle with 12 position tool rack

POWER REQUIREMENTS5HP air cooled spindle-220VAC, 1 or 3 phase with 20 amp service6.6HP ATC air cooled spindle-220VAC, 1 or 3 phase with 20 amp service11HP ATC air cooled spindle-220VAC, 3 phase with 30 amp service

SHOP FOOTPRINTShop space requirements: 8 X 12 feet

TRAINING AND SUPPORT2 days of FREE factory hands on training.Weekly webinar style online training for CAD/CAM, 3d modeling.

COMPUTER OPTIONS:15.5 inch Laptop or dedicated onboard computer system.

INSTALLED SOFTWARE:Logmein software.Mach 3 CNC control softwareMicrosoft Essentials Anti-Virus Software

CAD/CAM SOFTWARE OPTIONS:ArtCAM ExpressArtCAM PROVCarve ProAspireTurboCAD

Kitchen Cabinet project produced by Tim McKye, Wales, UK

CRITERION, THE CABINETMAKERS CNC SYSTEM

Criterion Specifications:

Tim McKye, Wales, UK

Tim McKye, Wales, UK

13

ARTISAN IITHE COMPLETE CNC WOODWORKING SYSTEM• Sheet good processing

• Parts processing

• 5 axis spindle turning; rotary, indexed, simple or

complex

• Moldings

Note: ATC option with two channel dust collection manifold reduces Y travel by 4 inches.14

FRAME OPTIONS:

30 x 48 inches

30 x 72 inches

30 x 96 inches

30 x 120 inches

50 x 48 inches

50 x 72 inches

50 x 96 inches

50 X 120 inches

FRAME:Welded steel frame20 mm linear profile rails and carriages bearingsX and Y axis-Rack and Pinion driveZ axis-Precision Ball Screw DriveClosed loop NEMA 34 frame servo drive motors

SHOP FOOTPRINT:Note: Add 30 inches to the width and 20 inches to the length to calculate the footprint area.

TURNING CENTER:11 X 48, 72, 96, or 120 inchesArticulated bed angle of taper varies by the length of the bed.


SMART TOOLThe automated tool measurement system measures each tool before use and adjusts tool offsets. Smart Tool can also be used to measure the thickness of flat stock.

SPINDLE OPTIONS:5HP air cooled 220VAC manual tool change spindle or6HP ATC spindle with 6 position tool rack11HP ATC spindle with 12 position tool rack

POWER REQUIREMENTS5HP air cooled spindle-220VAC, 1 or 3 phase with 20 amp service6.6HP ATC air cooled spindle-220VAC, 1 or 3 phase with 20 amp service11HP ATC air cooled spindle-220VAC, 3 phase with 30 amp service

TRAINING AND SUPPORT2 days of FREE factory hands on training.Weekly webinar style online training for CAD/CAM, 3d modeling.

COMPUTER OPTIONS:15.5 inch Laptop or dedicated onboard computer system.

INSTALLED SOFTWARE:Logmein software.Mach 3 CNC control softwareMicrosoft Essentials Anti-Virus Software

CAD/CAM SOFTWARE OPTIONS:ArtCAM ExpressArtCAM PROVCarve ProAspireTurboCAD

ARTISAN II, THE COMPLETE CNC WOODWORKING SYSTEM

Artisan II Specifications:

Table created by Barry La Chance

Inlay Deck created by Cindy Anderson

Stair tred riser created by Harry Tippets, Utah

15

Terms & CONDITIONS

All Legacy CNC systems are built to order. Delivery times vary from 4 to 10 weeks depending on the model and level of customization required. A 50% deposit is required before manufacture of your CNC begins. The balance is due prior to shipment.

WARRANTYLegacy Woodworking Machinery warrants to

the original purchaser that its products are free from

defects in materials and workmanship. The warranty

covers electronic control devices for one year from the

date of delivery. This warranty covers the frame and

mechanical devises for three years from the date of

delivery. This warranty does not cover damage to Legacy

products that result from improper installation, accidental

abuse, misuse, natural disaster, insufficient or excessive

electrical supply, abnormal mechanical or environmental

conditions, and any unauthorized disassembly, repair, or

modification. Spindle, router, servos, and or VFD’s are

covered by the manufactures warranties.

TRADE INSLegacy will consider taking a CNC system in on trade towards the same model of CNC. The value of the trade in will be determined by the market value and condition of the trade in.

SHIPPINGAll shipments are FOB the factory in Springville, Utah.Delivery to residential addresses may include additional fees as will the request for a lift-gate.

All Legacy CNC systems are shipped in a protective crate and will probably require a fork lift or lift-gate.Order cancellations are subject to a 20% cancellation fee.

TRADE UP PROGRAMLegacy offers a trade up program to all original

purchasers of our CNC equipment. The trade up program allows a Legacy CNC owner to trade up one or more product classes i.e. Explorer to Arty, Arty to

Artisan or Criterion, Explorer to Criterion and so forth. The value of the CNC equipment being traded reflects a 10% devaluation for every year measured from the

time of delivery. Example: after 2 years the value of an Explorer CNC with a purchase price of $5000.00 would be $4000.00 applicable to the purchase of any Legacy

CNC given in the example above.



16

TERMINOLOGYThe CNC world has it’s own language that may seem daunting at first but with a little practice and study you can be speaking CNC like a pro.

Here a are some web links you can follow to learn more about CNC and CAD/CAM software language.

For a brief but thorough explanation of CNC operations and CNC terminology you can visit:

http://www.vectric.com/media/docs/support/intro-to-cnc/Intro-To-CNC-Vectric2013.pdf

SOFTWAREThe software you choose to design with will determine the type of CNC woodworking you will be able to produce.

Here are some resources you can use to determine which software is right for you.

WEBSITES:Vectrics software programs and their features you can visit::

http://www.vectric.com/products/compare.html

Software comparison chart, Artcam

http://www.artcam.com/feature-comparison.asp

http://www.powermill.com/overview/

For Custom cabinet shops we recommend:

Cabinetvision http://www.cabinetvision.com/

CUSTOMER SERVICERepairsMost repairs can be handled over the phone or with replacement parts. If a product repair or replacement is necessary, the Customer is responsible for all shipping charges, freight, insurance, and proper packaging to prevent breakage or damage in transit.

Technical SupportTechnical support is provided by Legacy via a repair/service ticketing system found on our

website. Our tech support staff will respond to tickets in the order they are received. Repair or service for systems no longer covered by our warranty will be provided at $50.00/hour. Emergency support can be scheduled by sending a complete description of the problem to [email protected].

SafetyOne of the great strengths of CNC equipment is the ability to operate the equipment from a distance. Unlike most woodworking equipment the operators hand

need never be near the cutting tools however automated equipment operators should follow industry safety standards. Wear eye and ear protection and avoid loose fitting clothing. Keep clear of the equipment while it is in operation. Never use hands to hold parts while the machine is in operation. Read and follow the safety guidelines that come with your CNC equipment.Your state may have additional safety standards in place for the operation of automated equipment.

Created by Kendell Cooper

17

If he determines that his skills fall short of those required to add the embellishments he has in mind he has a choice to make; should he seek more training and education, should he find another woodworker with the right skills and experience and pay him to add the desired embellishment, or should he push imagination aside and settle for the embellishments on his project that do fit within his skill set.

Now, with a CNC, he has a fourth option. Here’s how the CNC technology can bridge the skills gap. A woodworker has a brilliant idea, an idea that will transform his project from average to exceptional. By developing a new skill set, CAD/CAM programming, he is able to write a program that a CNC woodworking system can execute; and his embellishment, whether it’s a carving, inlay, turning, or sculpted form is produced perfectly.

I know, you’re thinking, “If I have to learn another new skill set why don’t I just learn to produce inlay?” The answer is, because after you learn this CAD/CAM skill set you can apply it to any woodworking discipline. The same skill set that allows you to program inlay will also allow you to create carved lettering for a classic wooden sign or plaque. That same skill set can be applied to wrapping a grapevine carving around a kitchen island corner post.

You’re next question has probably something to do with the length of time it will take you to learn this new skill set and is it worth it? What’s wrong with the first three options? Let’s take them one at a time:

CNCM I L L I N GS y s t e m s

Bridging the SKILLS GAP

OPTIONS

Every woodworker faces some sort of skill gap. The skill gap is the space between imagination

and the woodworkers skill set. If the woodworker envisions a plant stand with an inlaid top the first thing he must do is take stock of his inlay skills to

see if he’s up to the job.

Legacy Training Project


18

TAKE A CLASSThe cost of a veneer and inlay class at one of the better woodworking schools is $750.00 for four

days. The same school offers over 100 classes.

Let’s do the math. Assuming you have

unlimited time, 100 four day classes, one per week

to allow for travel time is just less than 2 years of classroom

time. The cost of the classes, $75,000.00. Add travel, food and lodging for 2 years on the road and well I don’t want to even guess at what the total cost of this type of education is.

FIND SOMEONE TO DO THE WORK FOR YOU.While this is a much less expensive alternative to becoming an expert on every aspect of woodworking you’ll still have to find the craftsman with the appropriate skill set, negotiate a price for the work, hope his schedule is compatible with yours, and hope that after you’ve paid a deposit and waited for delivery his skills measures up to your expectations.

OPTIONS THREE, JUST DO WITHOUT.I can only speak for myself, but just do without is not an option I’m willing to live with anymore, not when there is a realistic and affordable alternative.

CNC woodworking systems start at under $5000.00, far less expensive than the school option, and can deliver spectacular results. Even a large commercial CNC system is less expensive than the perpetual school options. If you’re willing to pay a bit more you can add spindle turning and joinery options to your CNC system and you’ll be able to tackle almost any aspect of woodworking.

So how about option 4? Is CAD/CAM difficult to learn? The honest answer is that for you to master every aspect of CAD/CAM would take some time and dedication. The good news is that one of Legacy’s instructors could teach you to make a simple house number sign in less than 30 minutes, a karate trophy plaque in another 30 minutes, and a 3D model that includes trees, elk, and boulders in about 1 hour.

Legacy offers every new CNC owner two days of hands on training at our factory in Springville, Utah. You’ll leave with a sound understanding of machine setup and operations chip-carving, simple turnings using our own CCAM software, and introduce you to 3D modeling and carving.

The second phase of Legacy’s CAD/CAM training program is weekly online classes. Each week at 4PM MST on Tuesdays and Thursdays you can join our online classes that feature a 20 to 30 minute training session followed by 30-40 minutes of questions and answers. Your questions don’t have to stay on the topic of the day. That free time is your opportunity to bring your questions to our experts.

Each class is recorded and posted on our website for future review so if you’re schedule doesn’t allow you to attend the class you can review the class at your leisure when it’s posted. Last year Legacy added over 80 new classes to our online training archive.

In addition to the factory training and weekly live classes, Legacy has also produced many full CNC projects. We’ve found that learning by doing is one of the most effective ways to learn a new skill and these projects will give you valuable CNC shop time that will compliment and add real world experience to your classroom time.

We refer to this two step training system program as “lifetime training” because there is no time on class attendance.

If you are considering CNC now or think it could be part of your future we invite you to check out our training program. Join us in a class, meet our instructors, or please feel free to visit our facility for a test drive.

Andy Anderson, President Legacy Woodworking Machinery

If he determines that his skills fall short of those required to add the embellishments he has in mind he has a choice to make; should he seek more training and education, should he find another woodworker with the right skills and experience and pay him to add the desired embellishment, or should he push imagination aside and settle for the embellishments on his project that do fit within his skill set.

Now, with a CNC, he has a fourth option. Here’s how the CNC technology can bridge the skills gap. A woodworker has a brilliant idea, an idea that will transform his project from average to exceptional. By developing a new skill set, CAD/CAM programming, he is able to write a program that a CNC woodworking system can execute; and his embellishment, whether it’s a carving, inlay, turning, or sculpted form is produced perfectly.

I know, you’re thinking, “If I have to learn another new skill set why don’t I just learn to produce inlay?” The answer is, because after you learn this CAD/CAM skill set you can apply it to any woodworking discipline. The same skill set that allows you to program inlay will also allow you to create carved lettering for a classic wooden sign or plaque. That same skill set can be applied to wrapping a grapevine carving around a kitchen island corner post.

You’re next question has probably something to do with the length of time it will take you to learn this new skill set and is it worth it? What’s wrong with the first three options? Let’s take them one at a time:



Dining table created by Harry Tippetts, Utah

19

Spindle options and power requirements.The type of power, single phase or three phase, voltage and amperage requirements will vary with the type of machine you purchase and the type of spindle or router that provides the cutting power.

Website Resources:CNC terminologyhttp://www.vectric.com/media/docs/support/intro-to-cnc/Intro-To-CNC-Vectric2013.pdf

Software comparison chart, ArtCAMhttp://www.vectric.com/products/compare.html

Software comparison chart, Artcamhttp://www.artcam.com/feature-comparison.asp

Rhino software featureshttp://www.rhino3d.com/features

PowerMillhttp://www.powermill.com/overview/

Cabinetvisionhttp://www.cabinetvision.com/


21

C u s t o m e rS H O W C A S E

DougPINNEY

Throughout most of my adult working career I owned my own businesses. Prior to retiring in 2009, at the

age of 67, I was a design and build general contractor focusing on commercial building construction. One thing

that made owning my own businesses so rewarding was learning new things and taking on new challenges. So I

knew when I retired I would have to find a way to satisfy my urge for learning. My wife had suggested that I finish up the

wood shop that I had started several years before retiring. I didn’t need much more prompting than that to get everything

rolling forward. I finished my 4000 square foot shop/warehouse and launched into woodworking full time.

Continuing my quest for new knowledge and skills, I started looking into CNC machines in early 2014. I came

across a lot of different machines but in most cases the key machinery was made out of weaker materials from China which didn’t interest me. I started reading through different trade magazines and searching the internet. I also came up with a set of criteria that I wanted in a new machine/company, namely, provide training up front, after market support, components manufactured in the US and stood completely behind their product. One evening I remembered that I saw Legacy Woodworking Machinery (a CNC manufacturer), at the Denver “Wood Show” I attended years earlier. I gave Legacy a call the first thing the next morning and found them to be very helpful with technical information and running different types of software on the machine. After the discussion, I realized they

had met all my criteria. Even though deep down I knew they were the right choice, I spent another month researching a few other possibilities but nothing compared to Legacy. Because I had reached out to them to get information, they had added me to one of their email distribution lists. I received an email one day from Legacy stating that Andy Anderson (owner of Legacy) was going to hold a three day seminar at a high school in Fort Garland, Co. They were more than willing to provide training even though I hadn’t purchased a machine. After attending the seminar, I was convinced that the Legacy was the machine for me and I ordered a Legacy Arty 58 Pro 5-axis machine with a water cooled spindle and Aspire software by Vectric the following week.

TESTIMONIALS

22

“Because of what I learned in training I have already recommended your product to others.”Wayne Schmidt

“We received the machine and we are very pleased with it, our expectations have been met and surpassed. My father has an eye for quality and he is amply impressed.”Shane Mountain

“John, we want to thank you and Jesse so much for coming up today. You have helped us so much to move forward with what we

need to do to become more proficient with the software and the machine.”

Karen Ackley

“Your Tuesday Thursday online classes are great! They are very informative. I like the way they teach. The teachers really care

about their customers!”Bob Prichard

“Well John I hope you made it back home without incident if you know what I mean. I want to thank you again for the time you spent with me on Saturday and Sunday fixing all my program and machine bugs it was a real treat I enjoyed both days with you. I have a real passion for both wood and steel emphasis more on wood. I definitely need to get out to Utah this year to learn more about this machine it is a great product . Again John thank you for the time you did spend with me greatly appreciate it. You have a great day and a better tomorrow.”John Dahoda

“The Mini-Arty is such a versatile machine! I love it! Your service is phenomenal! I am booked out with work for the next two months. It has been a great addition to my shop.”John Kosa

“Cindy, John, Tracy, Chris, Andy and all others in the shop who helped educate us while we were there and the continued efforts as we learn the ins & outs of the CNC and programs.”Doug, Nicole, & Haley Thoma

“Unbelievable. Being pleasantly surprised would be a great

understatement. Following your two day CNC introduction neither Jim nor I could believe the amount of one on one effort your team expended to the

bring two novices from zero knowledge to being comfortable with the Arty

machine... You not only have a great product but an exceptional family team dedicated to helping current and past customers with their applications and

problems. Everyone we met was not only dedicated to service but also exceptional

in training...”Roy Wilkins

TESTIMONIALS

Cabinets created by Tim McKye, England 23

Place Postage

Here

Legacy Woodworking Machinery435 W 1000 NSpringville, UT 84663Phone: 801.491.0010 Toll Free: 800.279.4570

Inlay Deck created by Cindy Anderson, Utah

24

20639 Lycoming Street #B-6, Walnut, CA 91789 U.S.A. 1 E-Mail : [email protected] Shop Online : http://www.magnate.net

(TEL) 800-827-2316, 909-468-5747 (FAX) 909-468-5745

Router Bits For Legacy Ornamental Milling Machinery _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Combination Barley Twist

Designed for the Legacy™. These bits aredesigned to create traditional style barleytwist profiles with diameters over 3”.

As shown above, to create a 6” diameterbarley twist profile, first start by using a 3”diameter rope moulding bit # 7586, to makea 2-start rope with 6” pitch. Next, plunge onthe top of one of the rope heads to create acove using the 3” Combination Barley Twist bit #7546. To attain the desired depth,3-5 passes are required. When completedthe final pass should match up with the edgeof the bead on each of the sections of rope. Profile Dia.

Pair of Combination Bits Barley Twist Rope Moulding

4” 7544 7584 5” 7545 7585 6” 7546 7586

These bits can be also used separately to form cove detail for turnings or mouldings. Tool Cutting Shank Shank No. Dia. R1 R2 Length Dia. Price 7544 2” 0.9167” 2-1/8” 2” 1/2” $52.707545 2-1/2” 1.1458” 2-21/32” 2” 1/2” $61.717546 3” 1-3/8” 3-3/16” 2” 1/2” $71.777540 (Includes 7544, 7545, 7546) $158.25

Barley Twist

Designed for the Legacy™. These bits are designed to create traditional style barley twist. When combined with a spiral up-cut bit they also form a beautiful hollow spiral. Can also be used for grooving or flat moldings.

7557 is a spiral pen making bit for Legacy.

Tool Cutting Shank Shank No. Dia. r1 r2 Length Dia. Price7557 3/4” 3/32” 3/8” 1-1/2” 1/4” $28.507558 3/4” 3/32” 3/8” 2” 1/2” $29.407551 1” 1/8” 1/2” 2” 1/2” $36.107554 1-1/2” 3/16” 3/4” 2” 1/2” $41.807552 2” 1/4” 1” 2” 1/2” $49.607556 2-1/2” 5/16” 1-1/4” 2” 1/2” $58.727553 3” 3/8” 1-1/2” 2” 1/2” $71.697550 (Includes 7551, 7552, 7553) $133.78

Rope Moulding

Designed for the Legacy™ to mill rope designs on spindle and columns up to 10”diameter. These bits can also be used forgroove/bead forming applications i.e. flatmouldings or indexed rosettes.

#7584, #7585 and #7586 can be used inconjunction with the Combination BarleyTwist bits to create big diameter barleytwist profiles.

Tool Cutting Profile Shank Shank No. Dia. Height r Length Dia. Price7588 3/4” .0938” 51/64” 2” 1/2” $26.727581 1” 1/8” 1-1/16” 2” 1/2” $31.217582 1-1/2” 3/16” 1-19/32” 2” 1/2” $39.797584 2” 1/4” 2-1/8” 2” 1/2” $48.607585 2-1/2” 5/16” 2-21/32” 2” 1/2” $59.657586 3” 3/8” 3-3/16” 2” 1/2” $71.747570 (Includes 7581, 7582, 7584) $101.667580 (Includes 7584, 7585, 7586) $152.99

Combination Rope Molding

#7521 (1st Cut) and #7522 (2nd cut) are used conjunctionally to create 4” diameter rope molding profiles while #7524 and #7525 are used for 5” diameter rope molding; #7527 and #7528 for 6” diameter rope molding.

Tool Cutting Profile Shank Shank No. Dia. Height r Length Dia. Price 7521 2” 1/2” 4-1/4” 2” 1/2” $52.147522 2” .1193” 4-1/4” 2” 1/2” $48.847524 2-1/2” 5/8” 5-5/16” 2” 1/2” $60.737525 2-1/2” .1492” 5-5/16” 2” 1/2” $57.417527 3” 3/4” 6-3/8” 2” 1/2” $72.907528 3” .179” 6-3/8” 2” 1/2” $68.64

Plunge Cove & Bead

Tool Cutting Cutting Shank Shank No. r1 r2 Dia. Length Length Dia. Price3641 1/8” 1/8” 1” 7/16” 1-¼” ¼" $19.453642 3/16” 3/16” 1-1/4” 9/16” 1-¼” ¼" $21.69

Brick Moulding

Designed for the Legacy™ to make rosettes (as seen on the wainscot project of our Video Demo CD) and decorative trim. Can also be used for traditional mouldings.

Tool Cutting Cutting Shank Shank No. r Dia. Height Length Dia. Price3961 0.35” 1-1/4” 3/8” 2” 1/2” $37.16


(TEL) 800-827-2316, 909-468-5747 (FAX) 909-468-5745

Router Bits For Legacy Ornamental Milling Machinery __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Deep Classic Point

These bits are similar to our Classic Plunge Cutting bits except that they have a deep point instead of a round tip. They create decorative bead and cove edge details. The above illustration depicts a wood column milled by the Legacy™ using these bits. Tool Cutting Cutting Shank Shank No. Dia. r Height Length Dia. Price 7536 3/4” 3/16” 5/8” 2” 1/2” $32.14 7531 1” 1/4” 3/4” 2” 1/2” $41.42 7534 1-1/2” 3/8” 1” 2” 1/2” $47.78 7532 2” 1/2” 1-3/8” 2” 1/2” $53.59 7533 3” 3/4” 2” 2” 1/2” $71.98 7530 (Includes 7531, 7532, 7533) $141.94

Shallow Classic Point

These bits are similar to our Classic Plunge Cutting bits except that they have a shallow point instead of a round tip. They create decorative bead and cove edge details. The above illustration depicts a wood column milled by the Legacy™ using these bits.

Tool Cutting Cutting Shank Shank No. Dia. r Height Length Dia. Price 7566 3/4” 3/16” 3/8” 2” 1/2” $31.75 7561 1” 1/4” 1/2” 2” 1/2” $36.65 7564 1-1/2” 3/8” 3/4” 2” 1/2” $43.80 7562 2” 1/2” 1” 2” 1/2” $49.81 7563 3” 3/4” 1-1/2” 2” 1/2” $65.49 7560 (Includes 7561, 7562, 7563) $129.16

45° Bevel Spiral

This bit creates spiral screws, and chamfered grooves on flat stock for the Legacy™. It will work with the following pitches: 1-1/2”, 3”, 4-1/2”, 6”, 7-1/2”, 9”, 12” & 15”.

Tool Small Cutting Cutting Shank Shank No. Dia. Length Dia. Length Dia. Price 935 1/2” 1” 1-1/2” 2” 1/2” $29.13

Plunge Cutting Roundover

With Radius Designed for the Legacy™. Great for milling 2” and 3” diameter balls on post or large beads on column bases. Can also be used for large diameter rope columns for a very pronounced rope design. Tool Overall Shank Shank No. r1 r2 Dia. Length Dia. Price7592 1” 1/16” 2” 2” 1/2” $44.297593 1-1/2” 1/8” 3” 2” 1/2” $65.68

Double Bead Point Plunge

These bits create double bead profiles for decorative edges and bead & cove details. The above illustration depicts a wood column milled by the Legacy™.

Tool Cutting Shank Shank No. Dia. r1 r2 Length Dia. Price3481 1” 5/16” 5/16” 2” 1/2” $34.173484 1-1/2” 9/16” 9/16” 2” 1/2” $41.233482 2” 5/8” 5/8” 2” 1/2” $50.013480 (Includes 3481, 3482, 3484) $106.60

Classic Plunge Cutting

For decorative edge grooving on cabinet faces and for picture and mirror frames. Tool Cutting Cutting Shank Shank No. r Dia. Length Length Dia. Price3931 3/32” 1/2” 3/8” 1-1/4” 1/4” $18.173932 5/32” 3/4” 1/2” 1-1/4” 1/4” $21.053933 5/32” 3/4” 1/2” 2” 1/2” $21.653934 15/64” 1” 5/8” 2” 1/2” $27.233935 3/8” 1-1/2” 3/4” 2” 1/2” $33.44

Provincial Plunge

This bit is designed for the Legacy™ to create a plunge version of French Provincial (without bearing) Tool Cutting Cutting Shank No. Length r1 r2 r3 Dia. Dia. Price3654 7/8” 1/2” 1” 1/4” 2” 1/2” $48.00

Classical Ogee Plunge

This bit is designed for the Legacy™ to create the classic ogee shape in a plunge style cut. Tool Cutting Cutting Shank Shank No. Dia. r Height Length Dia. Price3674 2” 1/4” 3/4” 2” 1/2” $47.62

Classical Spiral

Designed for the Legacy™. A cross between the classic plunge and the barley twist bit. Creates a more stylized bead and cove or a beautiful single start spiral. Can be also used as grooving bits.

Tool Cutting Shank Shank No. Dia. r1 r2 Length Dia. Price3951 1” 3/32” 1/2” 2” 1/2” $40.493954 1-1/2” 9/64” 3/4” 2” 1/2” $46.683952 2” 3/16” 1” 2” 1/2” $53.083953 3” 9/32” 1-1/2” 2” 1/2” $71.813950 (Includes 3951, 3952, 3953) $140.57


(TEL) 800-827-2316, 909-468-5747 (FAX) 909-468-5745

Router Bits For Legacy Ornamental Milling Machinery ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Large Cove Classic Plunge

Tool Cutting Cove & Bead Profile Shank No. Dia. Radius Height Dia. Price 3941 1” 1/2” & 1/8” 1/4” 1/2” $36.18 3944 1-1/2” 3/4” & 3/16” 3/8” 1/2” $44.56 3942 2” 1” & 1/4” 1/2” 1/2” $52.22

Plunge Cutting Roundover

With Radius Designed for the Legacy™. Great for milling 2” and 3” diameter balls on post or large beads on column bases. Can also be used for large diameter rope columns for a very pronounced rope design. Tool Overall Shank Shank No. r1 r2 Dia. Length Dia. Price 7592 1” 1/16” 2” 2” 1/2” $44.29 7593 1-1/2” 1/8” 3” 2” 1/2” $65.68

Legacy Pattern

Designed for the Legacy Ornamental Mill™, this bit allows you to follow a template when milling a contoured profile. It works on turnings up to 10" in diameter, square turnings up to 5" square or flat stock up to 5" thick. The router follows the template as you make approximately 1/4" deep cuts for 2 to 3 passes and then the bearing will follow the previous cut and support the router bit to eliminate chatter. It can also be used in a traditional router table like a pattern cutting router bit.

Tool Cutting Cutting Shank Shank No. Dia. Length Dia. Length Price 7621 1/2” 1/2” 1/2” 4-1/2” $29.19 7623 3/4” 3/4” 1/2” 4-1/2” $31.30 ** Shank length is measured from middle of the knife to the end of the shank.

Dovetail

Designed for making drawer fingers and for French dovetailing. This bit can also be used with the Legacy Ornamental Mill to create unique indexed dovetail slots at 90° or 120°spacing for furniture legs and three legged pedestals.

Tool Cutting Cutting Overall Shank No Angle Dia. Height Length Dia. Price467 7° 5/8” 7/8” 2-5/8” 1/2” $10.92468 7° 3/4” 7/8” 2-5/8” 1/2” $11.58407 14° 1/2” 1/2” 2-1/2” 1/2” $10.73403 14° 5/8” 5/8” 2-7/8” 1/2” $11.32404 14° 3/4” 3/4” 3” 1/2” $11.98469 14° 3/4” 7/8” 2-1/2” 1/2” $12.61405 14° 7/8” 7/8” 3” 1/2” $12.72406 14° 1” 7/8” 3” 1/2” $13.00

Side Face-Inlay

Designed for the Legacy™. Used for inlaying wood veneer, and other materials i.e. brass on either spindle stock up to 8" in diameter, or flat stock up to 4" wide that has a curved profile i.e. bow front drawer. The rabbet depth varies by using the following bearing:

Original Replacement Bearing BR-05 BR-08 BR-05 BR-04

1/8” 1/16” 1/8” 3/16”

Tool Cutting Overall Shank Shank No. Height Dia. Length Dia. Price1171 1/8” 7/8” 5” 1/2” $22.411173 1/4” 7/8” 5” 1/2” $25.30** Shank length is measured from middle of the knife to the end of the shank.

Side Fluting

Designed for the Legacy™. These bits are for milling fluted columns and spindles up to 8” in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile.

Tool Fluting Shank Shank No. r Hgt. Length Dia. Price6053 3/32” 3/16” 5” ** 1/2” $36.646051 1/8” 1/4” 5” ** 1/2” $39.196054 3/16” 3/8” 5” ** 1/2” $43.916052 1/4” 1/2” 5” ** 1/2” $48.626056 5/16” 5/8” 5” ** 1/2” $53.886058 3/8” 3/4” 5” ** 1/2” $58.58** Shank length is measured from middle of the knife to the end of the shank.

Plunge Button

Designed for the Legacy™. Plunge to mill buttons and fine details on flat moldings and/or around the circumference of a spindle or leg.Adds just the right touch for those details that give style to any project.

Tool Cutting Button Shank Shank No. Dia. Dia. R Dia. Length Price358 3/8” 1/4” 1/8” 1/2” 1-3/8” $17.42350 1/2” 3/8” 1/4” 1/2” 2” $19.59351 5/8” 5/16” 3/16” 1/2” 2” $21.97352 1” 1/2” 3/10” 1/2” 2” $26.99353 5/8” 1/2” 3/10” 1/2” 2” $24.35

Side Shallow Fluting

Designed for the Legacy™. Like Side Fluting bits, these bits are for milling shallow fluted columns and spindles up to 8” in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Cutting depth may be enlarged 1/16” by using BR-04 bearing.

Tool Overall Fluting Shank Shank No. Dia. Hgt. Length Dia. Price2451 13/16” 1/4” 5” ** 1/2” $34.362453 7/8” 3/8” 5” ** 1/2” $36.702455 7/8” 1/2” 5” ** 1/2” $41.452456 15/16” 5/8” 5” ** 1/2” $46.192457 1” 3/4” 5” ** 1/2” $51.562459 1” 1” 5” ** 1/2” $54.89** Shank length is measured from middle of the knife to the end of the shank.

V-Grooving

These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers andcabinets. Also good for sign lettering.

When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.

Tool Cutting Cutting Shank Shank No. Angle Dia. Length Length Dia. Price 704 90° 3/4” 5/8” 1-1/2” 1/2” $16.37706 90° 1” 3/4” 2” 1/2” $23.13708 90° 1-1/2” 1” 2” 1/2” $30.42


(TEL) 800-827-2316, 909-468-5747 (FAX) 909-468-5745

Router Bits For Legacy Ornamental Milling Machinery _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Side-Reeding

Designed for the Legacy™. These bits are for milling reeded columns and spindles up to 8” in diameter. Extended shafts allow for milling on the side of a larger diameter while following a curved profile.

Tool Beading Cutting Shank Shank No. r Hgt. Hgt. Length Dia. Price 7678 3/32” 3/16” 5” ** 1/2” $36.55 7676 1/8” 1/4” 5” ** 1/2” $39.03 7671 3/16” 3/8” 5” ** 1/2” $42.69 7672 1/4” 1/2” 5” ** 1/2” $48.72 7675 5/16” 5/8” 5” ** 1/2” $51.49 7673 3/8” 3/4” 5” ** 1/2” $55.24 ** Shank length is measured from middle of the knife to the end of the shank.

Extended Side-Reeding

Tool Beading Cutting Shank Shank No. r Hgt. Hgt. Length Dia. Price 7696 1/8” 1/4” 1” 5” ** 1/2” $39.57 7691 3/16” 3/8” 1-1/8” 5” ** 1/2” $43.23 7692 1/4” 1/2” 1-1/4” 5” ** 1/2” $49.13 7693 3/8” 3/4” 1-1/2” 5” ** 1/2” $55.06 7697 1/2” 1” 1-3/4” 5” ** 1/2” $62.27 ** Shank length is measured from middle of

the knife to the end of the shank.

Plunge Flat Roundover

When used with the Legacy™ machines, These bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.

Tool Small Cutting Shank Shank No. r Dia. Length Length Dia. Price 1272 1/8” 1/4” 3/8” 2” 1/2” $17.02 1282 1/8” 1/2” 3/8” 2” 1/2” $18.28 1273 3/16” 1/4” 7/16” 2” 1/2” $19.32 1274 1/4” 1/4” 1/2” 2” 1/2” $20.25 1284 1/4” 7/16” 1/2” 2” 1/2” $23.18 1275 5/16” 1/4” 9/16” 2” 1/2” $23.51 1285 5/16” 1/2” 1/2” 2” 1/2” $23.25 1276 3/8” 1/4” 5/8” 2” 1/2” $25.61 1278 1/2” 1/4” 3/4” 2” 1/2” $28.09

Classic Plunge Beading

Tool Cutting Cutting Shank Shank No. r Dia. Length Length Dia. Price 1293 1/4” 7/8” 7/16” 1-1/2” 1/2” $17.16

Point Cutting Roundover

These bits can be used with the Legacy Ornamental Mill™ to create indexed beads and reeds on flat or spindle stock.

Tool Cutting Shank Shank No. r Length Length Dia. Price

7507 1/8” 3/8” 1-1/4” 1/4” $13.717504 3/16” 7/16” 1-1/4” 1/4” $15.167503 1/4” 1/2” 1-1/4” 1/4” $17.357513 5/16” 9/16” 2” 1/2” $20.587502 3/8” 5/8” 2” 1/2” $23.037514 7/16” 11/16” 2” 1/2” $24.707501 1/2” 3/4” 2” 1/2” $26.407515 9/16” 13/16” 2” 1/2” $29.617516 5/8” 7/8” 2” 1/2” $32.187517 3/4” 1” 2” 1/2” $36.33

Bottom Cleaning (Surface Planning)

Good for cleaning out dadoes and wide, square groove cutting. Leaves a smooth, clean finished surface. Also perfect for milling round, square or flat stock on the Legacy Ornamental Mill™.

Tool Cutting Cutting Shank Shank No. Dia. Length Dia. Length Price2701 3/4” 15/32” 1/2” 2” $16.762702 7/8” 15/32” 1/2” 2” $18.802703 1” 15/32” 1/2” 2” $21.522704 1-1/4” 15/32” 1/2” 2” $24.702705 1-1/2” 15/32” 1/2” 2” $26.132725 40mm 15/32” 1/2” 2” $29.072706 2” 15/32” 1/2” 2” $38.922708 2-1/2” 15/32” 1/2” 2” $43.382707 2-3/4” 15/32” 1/2” 2” $49.692709 3” 15/32” 1/2” 2” $55.94

Core Box

For use in decorative fluting and sign making. Up shear cutting angle clears chips out fast for accurate and chatter free performance. Can be used with the Legacy Ornamental Mill™ to cut indexed flutes and coves on spindle stock or parallel flutes on flat stock. 817 is designed for Nevada style gaming table chip trays.

Tool Cutting Cutting Shank Shank No. r Dia. Length Dia. Length Price801 1/8” 1/4” 1/4” 1/4” 1” $10.77802 3/16” 3/8” 3/8” 1/4” 1” $12.09803 1/4” 1/2” 3/8” 1/4” 1-1/4” $14.36804 5/16” 5/8” 5/8” 1/4” 1-1/4” $17.17805 3/8” 3/4” 5/8” 1/2” 1-1/2” $18.85806 7/16” 7/8” 3/4” 1/2” 1-1/2” $20.96807 1/2” 1” 3/4” 1/2” 2” $23.30812 9/16” 1-1/8” 13/16” 1/2” 2” $24.66809 5/8” 1-1/4” 7/8” 1/2” 2” $27.25814 11/16” 1-3/8” 15/16” 1/2” 2” $27.98810 3/4” 1-1/2” 1” 1/2” 2” $32.25819 7/8” 1-3/4” 1-1/8” 1/2” 2” $36.69808 1” 2” 1-1/4” 1/2” 2” $42.48

Thread Cutting

This cutter is used to cut internal and external threads i.e. a wooden bolt and nut. The 90 degree angle produces a stronger wooden thread that is less likely to chip out. Legacy's CCAM software will automatically generate the G Code for both parts

Tool Overall Cutting Shank Shank No. Angle Dia. Height Length Dia. Price 796 90° 0.45” 0.15” 2” 1/4” $18.02798 90° 5/8” 3/8” 1-1/2” 1/4” $18.94

Side V-Grooving

Designed for the Legacy™. These bits are for milling v style flutes on spindles up to 8" in diameter or for cutting v style flutes or chamfer cuts on the face or a curved piece of flat stock i.e. bow front drawer.

Tool Overall Cutting Shank Shank No. Angle Dia. Height Length Dia. Price751 90° 7/8” 1/4” 5” ** 1/2” $31.89753 90° 1-1/8” 1/2” 5” ** 1/2” $34.32756 90° 1-3/8” 3/4” 5” ** 1/2” $36.88** Shank length is measured from middle of the knife to the end of the shank.


(TEL) 800-827-2316, 909-468-5747 (FAX) 909-468-5745

Router Bits For Legacy Ornamental Milling Machinery ___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Beading/Corner Rounding

Designed for decorative edge rounding. Good for making drop leaf table joints. Replacing original bearing (Br-03) by Br-02, these bits create a round edge with either single or a double stepped bead. Order Br-02 separately.

Tool Overall Cutting Shank Shank No. r Dia. Length Length Dia. Price 1210 1/2” 1-1/2” 3/4” 1-1/2” 1/2” $24.94

Ball End

Designed for the Legacy™. Used to mill spiral or index flutes on contoured spindles i.e. pineapple pattern on a finial. Tool Shank Small Shank No. r Length Dia. Dia. Price 2553 1/4” 4” ** 1/4” 1/2” $31.76 2554 5/16” 4” ** 5/16” 1/2” $36.36 2556 3/8” 4” ** 3/8” 1/2” $43.42 ** Shank length is measured from middle of the knife to the end of the shank.

2-Flute Right-Hand UP-Cut Spiral

These bits can be used with the LegacyOrnamental Mill to cut mortises, grooves, andhollow spirals. They can also be used whenfollowing a template to mill contoured profilesi.e. Queen Ann legs.

TooL Cutting Cutting Shank Overall No. Dia. Length Dia. Length Price 2001 1/8” 1/2” 1/4” 2” $14.14 2004 1/4” 3/4” 1/4” 2-1/2” $13.71 2005 1/4” 1” 1/4” 2-1/2” $15.21 2025 1/4” 1-1/4” 1/4” 3” $20.17 2007 3/8” 1-1/4” 3/8” 3” $28.81 2008 3/8” 1-1/4” 1/2” 3” $40.83 2010 1/2” 1-1/2” 1/2” 3-1/2” $42.77 2011 1/2” 2” 1/2” 4” $45.93

♦♦ 2-Flute Straight ♦♦

When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template, simulating to a copy lathe.

Tool Cutting Cutting Shank Shank No. Dia. Length Dia. Length Price 231 1/4” 3/4” 1/2” 1-1/2” $8.68233L 3/8” 1-1/2” 1/2” 2” $12.39234 7/16” 1” 1/2” 1-1/2” $9.37235B 1/2” 2” 1/2” 2” $15.91237L 5/8” 2” 1/2” 1-1/2” $16.50239 7/8” 1-1/4” 1/2” 1-1/2” $16.73241 1” 2” 1/2” 2” $20.43

♦♦ 2-Flute Straight Plunge ♦♦

These 2-flute plunge straight bits feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising. Tool Cutting Cutting Shank Shank No. Dia. Length Dia. Length Price283 3/8” 1-1/4” 1/2” 1-1/2” $10.81285B 1/2” 2” 1/2” 1-1/2” $16.15290 1” 1” 1/2” 1-1/2” $19.25293 1-1/2” 1-1/2” 1/2” 1-1/2” $24.12

Horizontal Crown Molding

These bits can also be used with the Legacy Ornamental Mill and/or Overhead Router to create linear moldings or it can be used to create turnings between centers on the Ornamental Mill.

Tool Cutting Cove Cutting Shank No. Dia. Depth Height Dia. Price5561 1-3/4” 5/16” 3/8” 1/4” $34.245563 1-3/4” 5/16” 3/8” 1/2” $36.745562 2” 3/8” 5/8” 1/2” $38.155564 2-1/8” 3/8” 5/8” 1/2” $40.215566 2-1/4” 3/8” 5/8” 1/2” $42.725565 2-1/2” 3/8” 5/8” 1/2” $44.325567 2-3/4” 3/8” 5/8” 1/2” $51.925568 3” 7/16” 11/16” 1/2” $60.51

Bird Mouth

The following Bird Mouth bits allow you to easily glue up 8-sided or 12-sided hollow columns. They create a nesting joint that isstronger and easier to glue up without shifting than the traditional miter joint. Material thickness can be up to 2" thick, allowing for deep cut profiles such as turnings, fluting, and spirals on the Legacy Ornamental Mill.

8-Sided Bird Mouth

To calculate the length of each individual wood stock: For the 8-sided column, divide the desired distance from one side to the other by 2.414.

Long Tool Cutting Small Diagonal Overall Shank No. Height Dia. Edge Dia. Dia. Price 5461 1-1/8” 1/8” 1” 1.539” 1/2” $28.525462 1-5/8” 1/8” 1-1/2” 1.857” 1/2” $45.295463 2-1/8” 1/8” 2” 2-1/8” 1/2” $62.27

12-Sided Bird Mouth

To calculate the length of each individual wood stock: For the 12-sided column, divide the desired distance from one side to the other by 3.732 Long Tool Cutting Small Diagonal Overall Shank No. Height Dia. Edge Dia. Dia. Price 5481 1-1/8” 9/16” 1” 1-9/16” 1/2” $26.325482 1-5/8” 1/4” 1-1/2” 1-3/4” 1/2” $42.765483 2-1/8” 1/8” 2” 2-1/8” 1/2” $57.07


(TEL) 800-827-2316, 909-468-5747 (FAX) 909-468-5745


Bowl & Tray Plunge

These bits are designed to create a flat bottom, two square sides and two bottom radii in only one pass. Ideal for making dishes or serving trays.

Tool Cutting Cutting Shank Shank No. R. Dia. Length Length Dia. Price S7801 1/4” 3/4” 5/8” 1-1/2” 1/2” $23.08 S7802 1/4” 1” 5/8” 1-1/2” 1/2” $24.30 S7803 1/4” 1-1/4” 5/8” 1-1/2” 1/2” $28.47

Plunge Round Over & Rout

Combination cutters for plunging through boards and for rounding corners as well as edge forming. Tool Small Cutting Shank Shank No. r Dia. Length Length Dia. Price 3917 3/16” 1/4” 3/8” 1-1/2” 1/2” $16.21 3918 1/4” 1/4” 3/8” 1-1/2” 1/2” $19.43 3919 5/16” 1/4” 7/16” 1-1/2” 1/2” $21.90 3920 3/8” 1/4” 1/2” 1-1/2” 1/2” $24.41 3921 1/2” 3/8” 3/4” 1-1/2” 1/2” $27.91 3924 9/16” 1/2” 15/16” 1-1/2” 1/2” $30.46 3922 5/8” 1/2” 1” 1-1/2” 1/2” $34.38 3923 3/4” 1/2” 1-1/8” 1-1/2” 1/2” $39.47 3927 1” 1/2” 1-3/8” 1-1/2” 1/2” $46.00

3-Flute Tapered Ball Nose Up-Cut Spiral

Tool Cutting Shank Overall Tapered No. Dia. Length Dia. Length Angle Price 2682 1/8” 1-1/2” 1/4” 3” 1° $48.39 2683 1/8” 1” 1/4” 3” 3° $47.47 2685 1/8” 3/4” 1/4” 3” 5° $44.85 2686 1/8” 1/2” 1/4” 3” 7° $44.09 2687 1/4” 2” 1/2” 4” 3° $88.32 2688 1/4” 1-3/8” 1/2” 4” 5° $103.95 2689 1/4” 1” 1/2” 4” 7° $101.72

3-Flute 60° V-Grooving & Carving

It is designed for professional sign making and lettering.

Tool Cutting Cutting Shank Shank No. Angle Dia. Length Length Dia. Price761 60° 5/8” 5/8” 1-1/4” 1/4” $18.40763 60° 5/8” 5/8” 2” 1/2” $19.76

Plunge Cove & Bead

Tool Cutting Cutting Shank Shank No. r1 r2 Dia. Length Length Dia. Price3641 1/8” 1/8” 1” 7/16” 1-¼” ¼" $19.453642 3/16” 3/16” 1-1/4” 9/16” 1-¼” ¼" $21.69

Professional Set (16 Bits Total) RBPROFESSIONAL – $475.42

Includes : Tool # 2704, 3952, 7581, 7582, 7554, 290, 285B, 283, 708, 807, 810, 3935, 351, 5567, 7676, 7623 This set of router bit includes 16 of the most commonly used router bits for the Legacy Ornamental Mill. This set of bits will allow you to create a wide variety or turnings featuring beads, coves, rope twist, barley twist, hollow spiral, diamond, pillowed diamond, Joinery, and contoured profiles. It will also allow you to create simple and speciality mouldings featuring beads, coves, buttons, denticulation, and rope inlay. There are also bits for rough and finish cuts for surfacing planning and dimension turning or flat stock.

Professional CNC Set (19 Bits Total)

RBCNC - $513.62

Includes : Tool #2704 x 2 pcs, 285B x 2 pcs, 231, 706, 761, 7581, 7584, 7551, 7552, 3952, 7503, 7501, 1274, 1278, 807, 810, 808

Fast Start Kit (3 Bits Total )

RBFASTSTART - $108.99

Includes : Tool #2704, 3952, 7581

This is the recommended starter set for the Legacy Ornamental Mill. We use these three router bits to teach the basics of turning, indexing and spiraling in the Fast Start Training DVD. These are very common router bits and that frequently used with the Ornamental Mill.

Fast Start CNC Set (9 Bits Total)

RBFASTSTARTCNC - $243.70

Includes : Tool #2704, 7581, 3952, 810 7551, 231, 285B, 706, 761


(TEL) 800-827-2316, 909-468-5747 (FAX) 909-468-5745


Flat Stock CNC Set

(5 Bits Total ) RBFLATSTOCKCNC - $91.06

Includes : Tool # 231, 285B, 2704, 761, 706

This is the recommended starter set for the Legacy Ornamental Mill.

Bowl Class Kit (4 Bits Total)

RBPBOWL01 - $135.67

Includes : Tool #7592, 241, 808, S7803 This set of router bits is used to created varying accents when milling various size bowls and trays.

Complete router bit set for the 8" Bowl project. You will also need a 2704 surface planning bit, if you do not already have one.

3-Leg Pedestal Set (4 Bits Total)

RBPEDESTAL - $83.09

Includes : Tool #1210, 468, 285B, 708 This set of router bit includes those used in the milling of Legacy's 3-Leg Pedestal Display Stand. They are demonstrated in the class titled “3-Leg Pedestal 1”.

Contemporary Bed Set

(6 Bits Total) RBPBED - $180.60

Includes : Tool # 5567, 7671, 2025, 285B, 290, 708

This Comtemporary Bed Bit Set consists of those router bits used in creating the 4-poster bed that Legacy designed.

The construction of this bed is demonstrated at Legacy's Woodworking Acadamy web page in the class titled: "4-Poster Bed 1".

Hollow Spiral Candlestick Set

(5 Bits Total) RBPCANDLE - $129.06

Includes : Tool # 7552, 810, 7503, 7507, 285B

This set of bits is used to create the large candlestick featured in Legacy's online class titled "Candlestick 1" that is part of the "Legacy Woodworking Academy" cirriculum.

Note: You will also need a 1/4" Collet reducer (Tool No. SCK14), and a bottom cleaning bit (Tool No. 2704).

Wall Clock Set (10 Bits Total)

RBPCANDLE - $251.81

Includes : Tool # 3961, 805, 807, 808, 810, 1207, 7502, 7503, 7564, 231 Note: You will also need a 1/4" Collet reducer (Tool No. SCK14),

dynaGlide Plus®

Tri-Bountry Dry-Lubricant & Cleaning

Conditioner

Tool No. : A12WT

Note : Ground Shipping OnlyPrice : $15.59

(10 oz Bottle)

Use on woodworking & metalworking tools, any metals.

dynaGLIDE® will not stain, discolor, or transfer. dynaGLIDE® penetrates instantly and dries within minutes, leaving behind extremely tough pressure film. Can be used for storage of tools, all router bearings, table beds, scroll-saw, ban-saw, cutters, lathe tools, all cutting/drilling/routing blades, etc. Will not stain wood or other material.

Replaces all other lubricants for any purpose.

2015 - Magnate · PDF fileCNC routers equipped with an automatic tool change system can change...

Documents

Transcript of 2015 - Magnate · PDF fileCNC routers equipped with an automatic tool change system can change...