2015 Canadian Price Book - Assa Abloy Books/2015 Price Books... · 4 ListpriceeffectiveJune8,2015...

download 2015 Canadian Price Book - Assa Abloy Books/2015 Price Books... · 4 ListpriceeffectiveJune8,2015 Terms and Conditions ASSA ABLOY Door Security Solutions Canada, a division of ASSA

If you can't read please download the document

Transcript of 2015 Canadian Price Book - Assa Abloy Books/2015 Price Books... · 4 ListpriceeffectiveJune8,2015...

  • List price effective June 8, 2015

    2015 Canadian Price Book

  • List price effective June 8, 20152

  • 3

    Table of Contents

    List price effective June 8, 2015

    Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . .4Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Tools and Rules

    Trademark Use Policy . . . . . . . . . . . . . . . . . . . . . . .8

    Finish Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Heavy Duty Floor Closers . . . . . . . . . . . . . . . . . . . . .10

    Offset Hung27, 127, 427, 327, L27, Q27, HM27, 20

    Single Acting Center Hung28, H28, 328, 428, EH28

    Double Acting Center Hung30, 40, H40

    Shallow Depth Floor Closers . . . . . . . . . . . . . . . . . .21Offset Hung

    51, 53, Q51, HM51Single Acting Center Hung

    50, 5040Double Acting Center Hung

    5020

    Specialty Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Duo Chek Double Acting Floor Closers

    10, 12, 15, 16Gate Closers

    354, 355, 356, 357, 359Security Closers

    SEC27Exterior Gate Closers

    1350, 1351

    Door Control Accessories . . . . . . . . . . . . . . . . . . . . .33CasterSpecial Cement CasesCover PansApplied StopInstallation Tools

    Overhead Concealed Closers . . . . . . . . . . . . . . . . . .35Commodity Grade 608 SeriesArchitectural Grade 700 & 800 Series

    Pivots and Pivot Sets . . . . . . . . . . . . . . . . . . . . . . . . .43Offset Pivot Sets

    117-1/4, 117, 173, 147, L147, 117-1/2, L117Intermediate PivotsPocket PivotsElectrified Pocket PivotsElectrified Intermediate Pivots

    Center Hung Pivot Sets127-3/4, 128-3/4, 370, 117-3/4, H117-3/4,178, 176Center Hung Top PivotsElectrified Center Hung Top Pivots

    Checkmate Stops & Holders . . . . . . . . . . . . . . . . . .53Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59Electromagnetic Door Holder/Releases . . . . . . . . .63Electrified Closer/Holders . . . . . . . . . . . . . . . . . . . . .65

    Smok-Chek VSmok-Chek VICheckmate 99

    Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

    CONTENTS PAGE CONTENTS PAGE

    Rixson and Design, Uni-Chek, Smok-Chek, Duo-Chek and Checkmate are registered trademarks of Yale Security Inc. Other products' brand names may be trademarks or registered trademarks of their respectiveowners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Copyright 2002-2015 Yale Security Inc.All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

  • 4List price effective June 8, 2015

    Terms and Conditions

    ASSA ABLOY Door Security Solutions Canada, a division ofASSA ABLOY Canada Ltd. and all of its current and futureassociated companies, subsidiaries and operating brandsreserve the right to decline an order, in whole or in part, whenthe type or quantity of goods or credit worthiness of thePurchaser is not satisfactory to us in our sole and absolutediscretion.The terms and conditions contained hereinconstitute the entire agreement between the parties.

    Purchase Orders, Quotations (Quote) requests,Acknowledgements or the like issued by the Purchaser thathave contrary standard terms and conditions are not bindingon ASSA ABLOY Door Security Solutions Canada, unless suchterms and conditions are approved in a separate writtenagreement by ASSA ABLOY Door Security Solutions Canada sauthorized representatives.

    In the event of an acceptance of Purchasers Purchase Orderby ASSA ABLOY Door Security Solutions Canada, thePurchaser agrees that such acceptance is solely conditionedon Purchasers acceptance of the terms and conditions setforth in this instrument, regardless of the terms and conditionsspecified in the Purchasers Purchase order.

    The terms and conditions in Purchasers Purchase Order whichconflict with terms and conditions of this instrument shall bedisregarded and are hereby rejected, and this instrument shallconstitute the entire agreement between ASSA ABLOY DoorSecurity Solutions Canada and the Purchaser.

    In the event that ASSA ABLOY Door Security Solutions Canadadoes not enforce or require strict performance of any term orcondition hereof, or of any other document, instrument or otheragreement relating to goods sold, such lack of enforcement orrequirement of strict performance will not waive, affect ordiminish any right of ASSA ABLOY Door Security SolutionsCanada to enforce or require strict performance of such termor condition in the future.

    Prices:All prices are subject to change without notice and are notguaranteed. All shipments will be made at prices in effect atthe time of order acceptance. Possession of price lists doesnot constitute an agreement to sell. Acknowledgements,invoices and quotations are on an Errors and OmissionsExcepted basis (commonly referred to as E.O.E.). We reservethe right to correct clerical, stenographic and other obviouserrors at any time.

    Terms:1% tenth of the month following, net thirty (30) days afterstatement date. It is understood that ASSA ABLOY DoorSecurity Solutions Canada may impose and charge a financecharge of 2% per month or the highest rate allowed by law onany amount which becomes past due and delinquent.Additionally, the Customer shall be responsible for all collectioncosts, court costs and reasonable attorneys fees in connectionwith the recovery of any delinquent amount.

    Minimum Invoice:Minimum invoice for complete product is $250.00 net productvalue. The minimum invoice for parts orders is $100.00 net

    product value. Any orders not totaling these minimums will beinvoiced at the minimums. This policy does not include thefollowing: Cut (bitted) Keys of any type, Master KeyedCylinders, Master Keyed Padlocks and Factory GeneratedBitting Lists. Same day order expedites will be invoiced atbook less 50%.

    Quotations:If ASSA ABLOY Door Security Solutions Canada elects tooffer a Quote, such Quote will be valid for ninety (90) days.Complete shipment of the order must be accepted byPurchaser within nine (9) calendar months from the dateof issuance.

    The Quote number and project name must be referenced onthe order. Any invoiced order that has the incorrect discountapplied to it and did not have a Quote copy attached to theorder or the Quote number written on the order will have aservice fee of $75.00 net DEDUCTED from any sales creditissued for the difference in discount.

    Changes to original quote will be accepted up to thirty (30)days from the date of the original quote. All changes mustreference the original quote number.

    The Quote is null and void if the Purchase Order does notinclude ALL product lines listed on the Quote or if thequantities for an item covered by the Quote deviate by 10% ormore. The Purchaser will have to solicit a new quotation.

    With the issuance and acceptance of a Quote for the purchaseof products, the Purchaser agrees that products so purchasedwill not be resold or transferred to any Distributor notauthorized by ASSA ABLOY Door Security Solutions Canada tosell its products. This would be inclusive of branches of thequoted Distributor. Failure to abide by this restriction may resultin the Distributors ineligibility for Quotes, or other actions inASSA ABLOY Door Security Solutions Canadas discretion.

    ASSA ABLOY Door Security Solutions Canada and its salesrepresentatives reserve the right, in their sole discretion and forany reason, to refuse a Distributors request to quote a priceother than ASSA ABLOY Door Security Solutions Canadasstandard list price and regardless of whether ASSA ABLOYDoor Security Solutions Canada or its sales representativeshave previously quoted discounted prices to the Distributor onsome or all of its orders.

    Special Orders:Products not cataloged or listed in this price book will beconsidered as special products, and will not be manufacturedwithout prior approval from ASSA ABLOY Door SecuritySolutions Canada.

    A minimum special handling charge of $50.00 will be added fornon cataloged product. Any additional labour or materialrequired will be charged accordingly. Special products requirespecial handling, and therefore standard lead times may notapply. Please consult with your Sales Representative for furtherdetails.

  • 5

    Terms and Conditions

    List price effective June 8, 2015

    High Security Orders:To ensure proper control of End User restricted Products, ASSAABLOY Door Security Solutions Canada requires that the EndUser complete a Delivery of Controlled component formindicating to whom the product will be shipped to upon leavingthe factory or the distribution centre.

    All orders must be accompanied with a current copy of theAuthorization form and must be signed by the properauthorized personnel whose name(s) is on file with ASSAABLOY Door Security Solutions Canada.

    High Security products are defined as high security key blanks,cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts.

    ASSA ABLOY Door Security Solutions Canada reserves theright to request authorization from the end user if necessarybefore the order is processed.

    Changes / Cancellation of Orders:Changes or cancellations to a non stock order that has beenreleased to production will be subject to a charge of costs formaterial and labour expenses that have been incurred prior tonotification from Customer. Handling charges are billed onCustomers original order.

    All change requests for Mercury or Turbo goods must besubmitted in writing to Customer Service within two (2)business days of receipt of acknowledgement of the order.In those instances where a cancellation is accepted, ASSAABLOY Door Security Solutions Canada reserves the right tomake a reasonable cancellation charge based on expensesincurred.

    Packaging:Many items are defined as to Case Lot Packaging or MinimumOrder. The case lot policy does not apply to hardware to beused on a specific hardware project.

    Delivery:Orders will be acknowledged and given a scheduled deliverydate based on estimated manufacturing lead times. Completeinformation is required to process all orders. Orders withinsufficient information for processing (i.e. keying information,door sizes, etc.) may be subject to extended lead times whichare relative to the time required in obtaining the necessaryinformation for order processing. Manufacturing lead time willbegin once all information is received to process an order.ASSA ABLOY Door Security Solutions Canada will usereasonable efforts to deliver products as estimated, but makesno guarantee as to delivery dates.

    ASSA ABLOY Door Security Solutions Canada will not be liablefor back charges incurred based on availability of product or asa result of delays in delivery caused by insufficient informationrequired to process an order.

    ASSA ABLOY Door Security Solutions Canada will not be heldresponsible for delays in delivery caused by strikes, fires, floodsor any other causes beyond our control, including the delivery

    of material to us. Under no circumstances shall ASSA ABLOYDoor Security Solutions Canada be liable or accountable forconsequential damages due to failure of delivery. Unless yourorder specifies otherwise, partial shipments will be made on orafter the scheduled delivery date.

    Terms of Shipment:All products are shipped FOB the factory or the distributioncentre unless otherwise agreed to in writing from ASSA ABLOYDoor Security Solutions Canada. Title to and risk of lossproduct shipped is the responsibility of the purchaser anddelivery is deemed to be complete upon transfer of the productto a common carrier. Carriers carry limited insurance. If thecustomer requires additional insurance coverage pleasecontact our customer service department.

    All claims for shortages and damage are the responsibility ofthe purchaser. ASSA ABLOY Door Security Solutions Canadawill assist the Purchaser with documentation necessary tomake a claim if requested to do so by the purchaser.

    ASSA ABLOY Door Security Solutions Canada will ship via thebest possible carrier. Shipments at the customers request willbe prepaid and any up-charge (actual cost less the amountnegotiated by ASSA ABLOY Door Security Solutions Canada)will be added to the invoice.

    Claims:In the event of ASSA ABLOY Door Security Solutions Canadaor Customer error, claims for shortages, pricing errors and/orincorrectly filled orders must be submitted in writing toCustomer Service within thirty (30) days from receipt ofmaterial.

    Any claims for shortages or damage by the Carrier must bemade by the Customer directly to the Carrier.

    Limited Carrier insurance is typically offered for all orders. If theCustomer requires additional insurance, please contact a ASSAABLOY Door Security Solutions Canada Customer ServiceRepresentative upon submittal of the order. ASSA ABLOY DoorSecurity Solutions Canada will obtain requested insurance andthe additional cost will be included on Customers invoice.

    Invoice Deduction:An ASSA ABLOY Door Security Solutions Canada SalesRepresentative or Customer Service Representative must benotified of any disputed invoices within thirty (30) days fromthe date of invoice. Deductions should only be taken for thedisputed amount and the balance of the invoice is due andpayable within standard payment terms.

    Returned Goods:No Material is to be returned to our facilities without priorwritten approval from customer service. It is the policy of ASSAABLOY Door Security Solutions Canada to not accept returnsof any materials that are correctly furnished as per theDistributors Purchase Order.

  • 6List price effective June 8, 2015

    Terms and Conditions

    Mercury and Turbo material may be returned with approval, ifASSA ABLOY Door Security Solutions Canada believes theproduct is resalable. All such product must be returned in itsoriginal unmarked carton. The goods must have been shippedand invoiced in the previous sixty (60) days. Returns will be atthe distributors expense. The goods returned will be subject toinspection and a minimum 20% restocking fee will be appliedto compensate for the cost of inspection, repacking andhandling.

    Return of product due to customer order error oraccommodation must be prearranged with ASSA ABLOY DoorSecurity Solutions Canada and approved in writing by SalesManagement.

    A minimal restocking fee of 50% will be charged. Upon receiptand verification by ASSA ABLOY Door Security SolutionsCanada that the returned merchandise is in saleable conditionand that the material can be returned to the originalmanufacturer.

    Defective goods that are out of warranty period will not beaccepted for return. Products that are master-keyed, specialorders, key bitted will not be accepted under anycircumstances, unless the product is determined to bedefective.

    Procedure:Ensure the RGA labels that are sent to Purchaser by ASSAABLOY Door Security Solutions Canada are visible on returngoods shipment. Ensure that the RGA number appears on thereturn shipment label and is legible.

    Return the authorized merchandise within sixty (60) days fromthe date of RGA issuance. Return shipments must be freightprepaid to the distribution centre (at time some directions mayapply to return the goods to the original manufacturer) ASSAABLOY Door Security Solutions Canada is not liable fordamages to product during shipping.

    No credit may be taken or issued prior to RGA approval andreceipt of product. All defective goods within the terms of ourlimited warranty may be returned for repair or replacement only.

    Taxes:Prices do not include any present or future Federal, Province,or Local property, license, privilege, sales, use, excise, grossreceipts or other like taxes or assessments, which may resultfrom transactions or any services performed in connectionherewith.

    Governing Law:The rights and obligations of the parties shall be governed bythe laws of the Province of Ontario, excluding any conflicts oflaw provisions. The United Nations Convention on Contracts forthe International Sale of Goods shall not apply to this.

    Indemnity:Purchaser shall indemnify ASSA ABLOY Door SecuritySolutions Canada and hold ASSA ABLOY Door SecuritySolutions Canada harmless against all claims, liability, loss orother damages (including costs, legal or otherwise incurred byASSA ABLOY Door Security Solutions Canada) to all personsfor injury of any nature, including sickness and/or death,property damage at the time of delivery or after when theproduct is no longer in ASSA ABLOY Door Security SolutionsCanada possession or control.

    Force Majeur:ASSA ABLOY Door Security Solutions Canada shall not beliable for its failure to perform due to any contingencies beyondits control, including but not limited to acts of God, firesfloods, wars, sabotage, accidents, labour disputes, shortages,government laws, ordinances, rules and regulations.

    ASSA ABLOY Door Security Solutions Canada shall not beliable for its failure to deliver due to its inability to obtainmaterials, equipment failure, labour actions, transportationissues or any similar contingencies.

    In the event of delays due to the aforementioned contingencies,the date of delivery will be postponed by such length of time asthe circumstances dictate.

    Copyrights and Patents:All products in ASSA ABLOY Door Security Solutions Canadacatalogues, brochures and price lists are either patented,Copyrighted or registered by ASSA ABLOY Door SecuritySolutions Canada.

  • 7

    Limited Warranty

    List price effective June 8, 2015

    Yale Security Inc (the Company) warrants that its products sold under the Rixson trade name in the UnitedStates of America are free from defects in workmanship and materials under normal use and service.

    This warranty does not cover defects or damage arising from improper installation, lack of or impropermaintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident,unauthorized service, use with unauthorized non-Rixson products or parts, or the effects of erosion, or corrosion onthe finish. This warranty is void if any modification is made to the product regardless of whether the modificationcauses or contributes to the alleged defect. All modifications are made at the risk of the party making themodification.

    The only liability of the Company in tort or contract whether under this warranty or otherwise shall be limited to therepair or replacement of any product or component part which shall prove defective as covered by this warranty.

    The warranty period after delivery to the original purchaser in all cases is as follows:

    Rixson door controls:Series 27/28, 30/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 yearsElectrified Closer/Holders and Electromagnetic Holder/Releases. . . . . . . . . . 2 yearsAll other Rixson products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 years

    The Company will not pay for the cost of repair performed other than in accordance with this warranty. Writtennotice of a product or component part believed to be defective as covered by this warranty should be sent toYale Security Inc., 1902 Airport Road, Monroe, North Carolina 28110, and should include your name and address,an identification of the product or component part and a brief description of the defect. Upon receipt of suchnotice, the Company will inform you where to ship such product or component part, shipping charges prepaid, forexamination and, in the event such examination reveals a defect covered by this warranty, the product will berepaired or replaced.

    THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALLIMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. YALE SECURITY INC. SHALL NOTBE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

    SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THEEXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OREXCLUSIONS MAY NOT APPLY TO YOU.

    THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICHVARY FROM STATE TO STATE.

  • 8List price effective June 8, 2015

    Tools and Rules

    Trademark Use Policy: ASSA ABLOY Americas The following policy (Policy) of ASSA ABLOY Americas (ASSA ABLOY), and all of its affiliated group companies (collectively,the Group Companies), applies to the use of certain intellectual property of all such Group Companies, including all trademarks,names, logos, product images, and related information (the ASSA ABLOY Marks). ASSA ABLOY Marks are proprietary andcritical to the success of ASSA ABLOY and the Group Companies, and may only be used in strict compliance with this Policy.

    This Policy covers any person or entity reselling any product of any Group Company with the consent of such Group Company(each, an Approved Reseller). Each Approved Reseller has a non-exclusive right to use certain of the ASSA ABLOY Marksrelating to any of the Group Companies for which it is an Approved Reseller, subject to the following conditions:

    (1) Approved Resellers use of ASSA ABLOY Marks must be truthful, fair, and not misleading;

    (2) Approved Resellers advertising must clearly indicate that it is advertising of the Approved Reseller, and is not advertising ofASSA ABLOY;

    (3) Approved Reseller may not use any ASSA ABLOY Marks as part of or in connection with a domain name;

    (4) Approved Resellers advertising must not imply or suggest an association between the Approved Reseller and ASSA ABLOYother than that of buyer and seller;

    (5) Approved Resellers use of ASSA ABLOY Marks must be a positive representation of ASSA ABLOY, the Group Companies,and their products;

    (6) Approved Resellers trade name must be more predominant on Approved Resellers advertising than the ASSA ABLOY Marks;

    (7) Approved Resellers use of ASSA ABLOY Marks must include the trademark symbol or TM, as appropriate, along with thefollowing trademark legend printed in legible text on the Web page or document containing ASSA ABLOY Marks: [describeASSA ABLOY Marks] are trademarks or registered trademarks of ASSA ABLOY, Inc. or one of its affiliates in the UnitedStates and other countries.;

    (8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and

    (9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is an ApprovedReseller (e.g., an Approved Reseller that sells Group Company X products but not Group Company Y products may useGroup Company X trademarks in connection with its sale of Group Company X products, but may not use Group CompanyY trademarks).

    ASSA ABLOY reserves the right to review Approved Resellers usage of ASSA ABLOY Marks at any time and may:

    (a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must be implementedwithin 30 days of written notice to Approved Reseller;

    (b) condition the use of ASSA ABLOY Marks on ASSA ABLOYs prior approval of such use, which approval may be withheld inits sole discretion;

    (c) revoke permission to use ASSA ABLOY Marks at any time for any or no reason upon 30 days prior written notice to ApprovedReseller; and

    (d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Approved Reseller in the event Approved Reseller isin violation of this Policy, or of any other agreement with ASSA ABLOY or any Group Company. Approved Resellers right to useASSA ABLOY Marks in no way conveys to Approved Reseller any proprietary or economic interest in any ASSA ABLOY Marks.

    Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and criminal liabilities. ASSA ABLOY will vigorouslyenforce this Policy by seeking all appropriate legal remedies, including, but not limited to, pecuniary damages and injunctive relief.

    If there are any questions on this policy, please contact Linda Dean at [email protected] or 203-498-5596

  • 9List price effective June 8, 2015

    Finish Definitions

    Finish Symbol Designations

    Blackened or hammered finishes are not available.For any other finishes not listed, contact pricing department, 800-457-5670.

    * Patch fittings are available in these finishes only.

    ** BHMA numbers are assigned by base metals on which finish is being applied. For more information see

    ANSI 156.18. Appearance should closely match old US numbers.

    For finish availability see product "how to order" pages.

    BHMA** US DESCRIPTION

    600 / 674 P PRIME COAT

    605* / 632 3 BRIGHT BRASS

    606 / 633 4 SATIN BRASS

    611 / 637 9 BRIGHT BRONZE

    612 / 639 10 SATIN BRONZE

    613 / 640 10B DARK BRONZE

    613E / 640E 10BE DARK OXIDIZED SATIN BRONZE - EQUIVALENT

    618 14 BRIGHT NICKEL

    619 15 SATIN NICKEL

    622 / 693 19 FLAT BLACK

    625 / 651 26 BRIGHT CHROME

    626 / 652 26D SATIN CHROME

    629* 32 BRIGHT STAINLESS

    630* 32D SATIN STAINLESS

    689 SPRAYED ALUMINUM

    690 SPRAYED DARK BRONZE

    691 SPRAYED LIGHT BRONZE

    696 SPRAYED BRASS

  • 10

    Heav

    yDu

    tyFl

    oorC

    lose

    rs

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 19

    List price effective June 8, 2015

    *Finish required, see page 20N = Non-Hold open A = Automatic Hold Open S = Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts

    Heavy DutyOffset Hung Floor Closers

    Heavy Weight/Duty 3/4" Offset

    ModelComplete CloserSpecify Model,Hand and Degree

    LAPSpecify Model,Hand and Degree

    Top PivotPkg

    Bottom ArmPkg

    Floor PlatePkg

    CementCase Pkg

    27N 27N LAP 180252050R* 274050R*

    253000-PKG252050L* 274050L*

    $1,544.00 $1,049.00 $204.00 $108.00 $99.00 $92.00

    27S 27S LAP 180252050R* 274750R*

    253000-PKG252050L* 274750L*

    $1,670.00 $1,173.00 $204.00 $108.00 $99.00 $92.00

    F27N 27N LAP F180252050R* 274050R*

    253000-PKG252050L* 274050L*

    $1,805.00 $1,049.00 $465.00 $108.00 $99.00 $92.00

    27-180N 27-180N LAP 180252050R* 274050R*

    253000-PKG252050L* 274050L*

    $1,656.00 $1,161.00 $204.00 $108.00 $99.00 $92.00

    27-180A 27-180A LAP 180252050R* 274050R*

    253000-PKG252050L* 274050L*

    $1,781.00 $1,286.00 $204.00 $108.00 $99.00 $92.00

    F27-180N 27-180N LAP F180252050R* 274050R*

    253000-PKG252050L* 274050L*

    $1,916.00 $1,161.00 $465.00 $108.00 $99.00 $92.00

    127N 28N LAP 180652050R* 274050R*

    253000-PKG652050L* 274050L*

    $1,619.00 $1,040.00 $204.00 $191.00 $99.00 $92.00

    127S 28S LAP 180652050R* 274750R*

    253000-PKG652050L* 274750L*

    $1,745.00 $1,166.00 $204.00 $191.00 $99.00 $92.00

    F127N 28N LAP F180652050R* 274050R*

    253000-PKG652050L* 274050L*

    $1,880.00 $1,040.00 $465.00 $191.00 $99.00 $92.00

  • 11

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 19

    *Finish required, see page 20N = Non-Hold open A = Automatic Hold Open S= Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.

    List price effective June 8, 2015

    Heavy DutyOffset Hung Floor Closers

    HeavyDuty

    FloorClosers

    Independently Hung (HANGING MEANS AFFECT PRICING AND MUST BE NOTED WHEN ORDERING)

    Heavy Weight/Duty 3/4" Offset

    27N x 1-1/2OS 27N LAP 180 x1-1/2OS252060R* 274050R*

    253000-PKG252060L* 274050L*

    $1,764.00 $1,049.00 $364.00 $168.00 $99.00 $92.00

    27S x1-1/2OS 27S LAP

    180 x1-1/2OS

    252060R* 274750R*253000-PKG

    252060L* 274750L*

    $1,889.00 $1,173.00 $364.00 $168.00 $99.00 $92.00

    F27N x 1-1/2OS 27N LAP F180 x1-1/2OS252060R* 274050R*

    253000-PKG252060L* 274050L*

    $2,179.00 $1,049.00 $776.00 $168.00 $99.00 $92.00

    27 x180N x1-1/2OS 27 x 180N LAP

    180 x1-1/2OS

    252060R* 274050R*253000-PKG

    252060L 274050L*

    $1,875.00 $1,161.00 $364.00 $168.00 $99.00 $92.00

    27-180A x1-1/2OS 27 x 180A LAP

    180 x1-1/2OS

    252060R*252060L*

    274050R*274050L* 253000-pkg

    $1,960.00 $1,286.00 $355.00 $163.00 $95.00 $89.00

    F27-180N x1-1/2OS 27-180N LAP

    F180 x1-1/2OS

    252060R* 274050R*253000-PKG

    252060L* 274050L*

    $2,289.00 $1,161.00 $776.00 $168.00 $99.00 $92.00

    Model

    CompleteCloser SpecifyModel, Hand andHanging Means

    LAP SpecifyModel andHand

    Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

    **F327N 327N LAP N/A 3252010-* 3274010R* 253000-PKG3274010L*

    $1,629.00 $1,125.00 N/A $317.00 $99.00 $92.00

    ModelComplete CloserSpecify Model,Hand and Degree

    LAP SpecifyModel,

    Hand and Degree

    Top PivotPkg

    Bottom ArmPkg

    Floor PlatePkg

    CementCase Pkg

    ModelComplete CloserSpecify Model,Hand and Degree

    LAPSpecify Model,Hand and Degree

    Top PivotPkg

    Bottom ArmPkg

    Floor PlatePkg

    CementCase Pkg

    427N 28N LAP 180 x 102652050R* 274050R*

    253000-PKG652050L* 274050L*

    $1,785.00 $1,040.00 $328.00 $190.00 $99.00 $92.00

    427S 28S LAP 180 x 102652050R* 274750R*

    253000-PKG652050L* 274750L*

    $1,911.00 $1,166.00 $328.00 $190.00 $99.00 $92.00

    Heavy Weight/Duty 1-1/2" Offset

  • 12

    Heavy DutyOffset Hung Floor Closers

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 19

    List price effective June 8, 2015

    *Finish required, see page 20N = Non-Hold open A = Automatic Hold Open S= Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts

    Extra Heavy Weight/Duty/Lead Lined ALL OTHER DOOR THICKNESSES

    Extra Heavy Weight/Duty/Lead Lined 1-3/4" Door

    L27N L27N LAP L180252051R* 274050R*

    253001-PKG252051L* 274050L*

    $2,268.00 $1,457.00 $338.00 $191.00 $99.00 $191.00

    L27S L27S LAP L180252051R* 274750R*

    253001-PKG252051L* 274750L*

    $2,393.00 $1,583.00 $338.00 $191.00 $99.00 $191.00

    FL27N L27N LAP FL180252051R* 274050R*

    253001-PKG252051L* 274050L*

    $2,637.00 $1,457.00 $706.00 $191.00 $99.00 $191.00

    L27-180N L27-180N LAP L180252051R* 274050R*

    253001-PKG252051L* 274050L*

    $2,423.00 $1,612.00 $338.00 $191.00 $99.00 $191.00

    L27-180A L27-180A LAP L180252051R* 274050R*

    253001-PKG252051L* 274050L*

    $2,549.00 $1,737.00 $338.00 $191.00 $99.00 $191.00

    FL27-180N L27-180N LAP FL180252051R* 274050R*

    253001-PKG252051L* 274050L*

    $2,791.00 $1,612.00 $706.00 $191.00 $99.00 $191.00

    Model

    Complete CloserSpecify Model,Hand andDegree

    LAP SpecifyModel,Hand andDegree

    Top PivotPkg

    Bottom ArmPkg

    Floor PlatePkg

    CementCase Pkg

    Model

    Complete CloserSpecify Model,Hand andDegree

    LAP SpecifyModel, Handand Degree

    TopPivot Pkg

    BottomArm Pkg

    FloorPlate Pkg

    Cement CasePkg

    L27N x doorthickness L27N LAP

    L180 x doorthickness

    2" 252052R*2" 252052L*

    2-1/4" 252053R*2-1/4" 252053L*2-1/2" 252054R*2-1/2" 252054L*3" 252055R*3" 252055L*

    274050R*

    253001-PKG

    274050L*

    $2,616.00 $1,457.00 $509.00 $368.00 $99.00 $191.00

    L27S x doorthickness L27S LAP

    L180 x doorthickness See above

    274750R*253001-PKG

    274750L*

    $2,741.00 $1,583.00 $509.00 $368.00 $99.00 $191.00

    L27-180N x doorthickness L27-180N LAP

    L180 x doorthickness See above

    274050R*253001-PKG

    274050L*

    $2,771.00 $1,612.00 $509.00 $368.00 $99.00 $191.00

    L27-180A x doorthickness L27-180A LAP

    L180 x doorthickness See above

    274050R*253001-PKG

    274050L*

    $2,895.00 $1,737.00 $509.00 $368.00 $99.00 $191.00

    Heav

    yDu

    tyFl

    oorC

    lose

    rs

  • 13

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 19

    Heavy DutyOffset Hung Floor Closers

    *Finish required, see page 20N=Non Hold Open A=Automatic Hold Open S=Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts

    List price effective June 8, 2015

    HeavyDuty

    FloorClosers

    Heavy Weight/Duty Quick Install

    Heavy Weight/Duty HM Door and Frame Preps

    Model

    CompleteCloser

    Specify Model,Hand andDegree

    LAP SpecifyModel, Handand Degree

    Top Pivot Pkg Bottom ArmPkgFloor Plate

    PkgCement Case

    Pkg

    IntermediatePivot *Cannotbe ordered lessintermediate

    pivot

    Q27N Q27N LAP 180222050R* 294050R*

    253000-PKG M19222050L* 294050L*

    $2,065.00 $1,168.00 $204.00 $220.00 $99.00 $92.00 $289.00

    Q27S Q27S LAP 180222050R* 294750R*

    253000-PKG M19222050L* 294750L*

    $2,190.00 $1,293.00 $204.00 $220.00 $99.00 $92.00 $289.00

    FQ27N Q27N LAP F180222050R* 294050R*

    253000-PKG FM19222050L* 294050L*

    $2,669.00 $1,168.00 $465.00 $220.00 $99.00 $92.00 $634.00

    QT27N Q27N LAP 180222050R*

    N/A 253000-PKG M19222050L*

    $1,967.00 $1,168.00 $204.00 $220.00 $92.00 $289.00

    QT27S Q27S LAP 180222050R*

    N/A 253000-PKG M19222050L*

    $2,092.00 $1,293.00 $204.00 $220.00 $92.00 $289.00

    FQT27N Q27N LAP F180222050R*

    N/A 253000-PKG FM19222050L*

    $2,571.00 $1,168.00 $465.00 $220.00 $92.00 $634.00

    Model

    CompleteCloser SpecifyModel, Hand and

    Degree

    LAP SpecifyModel, Handand Degree

    Hinge Pkg(3 per pkg) Bottom Arm Pkg Floor Plate Pkg

    Cement CasePkg

    HM27N &FHM27N 27N LAP 254545*-PK

    222050R*HM 274050R*253000-PKG

    222050L*HM 274050L*

    $2,029.00 $1,049.00 $574.00 $220.00 $99.00 $92.00

    HM27S 27S LAP 254545*-PK222050R*HM 274750R*

    253000-PKG222050L*HM 274750L*

    $2,154.00 $1,173.00 $574.00 $220.00 $99.00 $92.00

    (3 Each)

  • 14

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 19

    Heavy DutyOffset Hung Floor Closers

    List price effective June 8, 2015

    Standard Weight/Duty 180 Swing

    ModelComplete CloserSpecify Modeland Hand

    LAP SpecifyModel and Hand TopPivot Pkg

    BottomArm Pkg

    FloorPlate Pkg

    Cement CasePkg

    20N 20N LAP 180 252050R* 204050R* 203000252050L* 204050L*

    $1,621.00 $1,125.00 $204.00 $107.00 $99.00 $92.00

    F20N 20N LAP F180252050R* 204050R*

    203000252050L* 204050L*

    $1,881.00 $1,125.00 $465.00 $107.00 $99.00 $92.00

    Heav

    yDu

    tyFl

    oorC

    lose

    rs

  • Heavy DutyCenter Hung Floor Closers

    15

    *Finish required, see page 22N = Non-Hold open A = Automatic Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts

    Options on page 19

    List price effective June 8, 2015

    HeavyDuty

    FloorClosers

    Heavy Weight/Duty Single Acting

    Model

    Complete CloserSpecify Model,Hand andDegree

    LAP SpecifyModel, Handand Degree

    Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

    28N x 554 28N LAP 340 282554284020R*

    253000-PKG284020L*

    $1,506.00 $1,040.00 $138.00 $138.00 $104.00 $92.00

    28S x 554 28S LAP 340 282554284720R*

    253000-PKG284720L*

    $1,631.00 $1,166.00 $138.00 $138.00 $104.00 $92.00

    28N 28N LAP 340 282026-*284020R*

    253000-PKG284020L*

    $1,506.00 $1,040.00 $138.00 $138.00 $104.00 $92.00

    28S 28S LAP 340 282026-*284720R*

    253000-PKG284720L*

    $1,631.00 $1,166.00 $138.00 $138.00 $104.00 $92.00

  • Heavy DutyCenter Hung Floor Closers

    16

    Options on page 19

    *Finish required, see page 20N = Non-Hold open A = Automatic Hold Open S = Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts

    Extra Heavy Weight/Duty single acting

    List price effective June 8, 2015

    Heav

    yDu

    tyFl

    oorC

    lose

    rs

    ModelComplete CloserSpecify Model

    Hand and Degree

    LAP SpecifyModel Handand Degree

    Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

    H28N H28N LAP H340 262022284020R*

    253001-PKG284020L*

    $2,534.00 $1,210.00 $441.00 $594.00 $104.00 $191.00

    H28S H28S LAP H340 262022284720R*

    253001-PKG284720L*

    $2,659.00 $1,335.00 $441.00 $594.00 $104.00 $191.00

    H28N x 587 H28N LAP H340 262587284020R*

    253001-PKG284020L*

    $2,534.00 $1,210.00 $441.00 $594.00 $104.00 $191.00

    H28S x 587 H28S LAP H340 262587284720R*

    253001-PKG284720L*

    $2,659.00 $1,335.00 $441.00 $594.00 $104.00 $191.00

  • Heavy DutyCenter Hung Floor Closers

    17

    Options on page 19

    *Finish required, see page 20N=Non Hold Open A=Automatic Hold Open S=Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts

    List price effective June 8, 2015

    HeavyDuty

    FloorClosers

    Model

    Complete CloserSpecify Model,Hand andDegree

    LAP SpecifyModel, Hand and

    DegreeTop Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

    328N 328N LAP N/A N/A284020R*

    253000-PKG284020L*

    $1,233.00 $1,040.00 $104.00 $92.00

    328S 328S LAP N/A N/A284720R*

    253000-PKG284720L*

    $1,359.00 $1,166.00 $104.00 $92.00

    428N 428N LAP 7494*PK 7495*PK284020R*

    253000-PKG284020L*

    $1,721.00 $1,040.00 $291.00 $200.00 $104.00 $92.00

    428S 428S LAP 7494*PK 7495*PK284720R*

    253000-PKG284720L*

    $1,846.00 $1,166.00 $291.00 $200.00 $104.00 $92.00

    Patch Fittings/Single Acting

    Model

    Specify Model,Hand, Degreeand Numberof Wires

    LAP SpecifyModel, Hand,Degree and

    Number of Wires

    Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

    EH28N EH28N LAP H340 262022284020R*

    253001-PKG284020L*

    $2,766.00 $1,442.00 $441.00 $594.00 $104.00 $191.00

    EH28S EH28S LAP H340 262022 284720R* 253001-PKG284720L*

    $2,892.00 $1,568.00 $441.00 $594.00 $104.00 $191.00

    EH28N x 587 EH28N LAP H340 262587284020R*

    253001-PKG284020L*

    $2,766.00 $1,442.00 $441.00 $594.00 $104.00 $191.00

    EH28S x 587 EH28S LAP H340 262587284720R*

    253001-PKG284720L*

    $2,892.00 $1,568.00 $441.00 $594.00 $104.00 $191.00

    Thru-wire/Power Transfer Single Acting

  • 18

    Heavy DutyCenter Hung Floor Closers

    Options on page 19

    List price effective June 8, 2015

    *Finish required, see page 20N = Non-Hold open A = Automatic Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts

    Heavy Weight/Duty Double Acting

    Extra Heavy Weight/Duty Double Acting

    Model

    Complete CloserSpecify Modeland Degree(If Hold Open)

    LAP SpecifyModel & Degree(If Hold Open)

    TopPivot Pkg

    BottomArm Pkg

    FloorPlate Pkg

    CementCase Pkg

    30N 30N LAP 340 302026 304020-* 303000

    $1,824.00 $1,321.00 $138.00 $138.00 $126.00 $108.00

    30A 30A LAP 340 302026 304020-* 303000

    $1,948.00 $1,447.00 $138.00 $138.00 $126.00 $108.00

    40N 40N LAP 340 302026 404020-* 403000

    $1,876.00 $1,348.00 $138.00 $138.00 $132.00 $129.00

    40A 40A LAP 340 302026 404020-* 403000

    $2,002.00 $1,472.00 $138.00 $138.00 $132.00 $129.00

    Model

    Complete CloserSpecify Modeland Degree(If Hold Open)

    LAP SpecifyModel & Degree(If Hold Open)

    TopPivot Pkg

    BottomArm Pkg

    FloorPlate Pkg

    CementCase Pkg

    H40N H40N LAP H340 262022 404020-* 403000

    $3,511.00 $2,321.00 $441.00 $594.00 $132.00 $129.00

    H40A H40A LAP H340 262022 404020-* 403000

    $3,637.00 $2,346.00 $441.00 $594.00 $132.00 $129.00

    H40N X 587 H40N LAP H340 262587 404020-* 403000

    $3,511.00 $2,222.00 $441.00 $594.00 $132.00 $129.00

    H40A X 587 H40A LAP H340 262587 404020-* 403000

    $3,637.00 $2,346.00 $441.00 $594.00 $132.00 $129.00

    Heav

    yDu

    tyFl

    oorC

    lose

    rs

  • Heavy Duty Floor ClosersOptions

    19List price effective June 8, 2015

    HeavyDuty

    FloorClosers

    Quick Reference Options

    Prefix Description Price

    PH

    Physically Handicapped 5# of opening force for ADA compliance for interior doors. If used onexterior or fire doors, the low opening force may not be enough to close the door. PH is alsoavailable in 8.5# of opening force. Suffix 8.5# when ordering. Rixson will not be responsible ifexterior or fire doors will not completely close when PH products are supplied.

    $-

    DA Delayed Action holds door open at 70 degrees for up to 40 seconds. DA cannot be ordered withhold open closers. Not available in Models 30 and 40.$116.00

    SC Sealing a closer protects it from moisture. Cement case and closer body are gasketed andfastened together. Closer must be ordered with cement case and shipped at the same time.$132.00

    W Reinforcement bracket that protects door skin for center hung wood doors using arm 282026, 302026. $-

    Suffix Description Price

    Ext Spdl To accommodate special floor conditions, the spindle can be ordered in 1/2 increments up to andincluding 2 longer. Closer must be ordered with longer spindle, it cannot be field adjusted. $119.00

    Torx Security screws. Only provided for screws visible. $226.00

    CWF Cold weather fluid for temperatures consistently below 0 degrees. $56.00

    -20 20 minute UL listing for smoke doors. Do not prefix F. $21.00

    8.5# Prefix PH when ordering this light opening force. Rixson will not be responsible if door will notcompletely close when PH products are supplied.$-

    SPLO Special layout that may require special templating and/or products

    Excludedfrom buyingprogram

    Contactfactory forpricing

  • 20

    Heavy Duty Floor ClosersAccessories

    How To Order

    How To Order)

    FPrefix

    27Model

    90Degree ofSwing

    NHold Open

    x 1/2" Ext SpindleSuffix

    x RHHand

    x 626Finish

    DA DelayedAction

    PH LighterSpring(ADA)

    F FireRatedDoors

    W WoodDoor(centerhung)

    27127427327L27Q27QT27HM272028H28328428EH283040H40

    859095105

    100 (30 and40 Series)

    180 (20 and27-180 only)

    N = Non-HoldOpen

    A = AutomaticHold Open

    S = SelectiveHold Open

    1-1/2OS 1-1/2" Offset2"2-1/4"2-1/2"3"554 Concealed Arm (28)587 H Arm (H28, H40)Ext Spdl Extended Spindle-20 20 Minute label8.5# Optional PH SpringLAP Less All PartsLFP Less Floor PlateLCC Less Cement CaseLTP Less Top PivotCWF Cold Weather Fluid

    - Depth for Cover Pan- # of Wires forElectrified Product

    TORX Security Screws(Offset Only)

    SPLO# Special Layout

    Blank (30 & 40)RH Right HandLH Left Hand

    605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized

    Satin Bronze- Equivalent

    618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome

    1101 Cement Case for use with expansion joints, (handed) $435.00

    79501 Cement Case for use with shallow floors (non-handed) $262.00

    25204 Twin Cement Case 1-7/8" Mullion for back to back closers. Must be ordered with closers. $208.00

    25304 Twin Cement Case 2" Mullion for back to back closers. Must be ordered with closers. $208.00

    846* Cover Pan for 27 closer, specify depth, hand 1-3/4 doors only $640.00

    3910* Cover Pan for L27 closer, specify depth, hand 1-3/4 doors only $640.00

    2237* Cover Pan for 28 closer x 554 flat arm, specify depth, hand. $640.00

    841* Cover Pan for 28 closer, centering arm, specify depth, hand. $640.00

    60131 Lock edge applied stop for center hung doors. Specify finish. $70.00

    1859001 Quickspotter Installation 25, 27, 28, 30, 40 $94.00

    1859501 Quickspotter Installation for Q27 $94.00

    * Specify stainless steel or brass

    Door Control Accessories

    Price

    List price effective June 8, 2015

    Heav

    yDu

    tyFl

    oorC

    lose

    rs

    } Door ThicknessL Series Product Only

  • 21

    *Finish required, see page 28NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or doorthicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.

    Shallow DepthOffset Hung Floor Closers

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 27

    List price effective June 8, 2015

    ShallowDepth

    FloorClosers

    Standard Weight/Duty 3/4" Offset

    Model

    Complete CloserSpecify Model,Hand & Degree(If Hold Open)

    LAP SpecifyModel, Hand &

    Degree(If Hold Open)

    Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement CasePkg

    5103NBC5104NBC5105NBC

    5103NBC LAP5104NBC LAP5105NBC LAP

    180252050R* 4000500R*XXE

    4000301252050L* 4000500L*XXE

    $1,538.00 $1,023.00 $204.00 $107.00 $107.00 $103.00

    5103ABC5104ABC5105ABC

    5103ABC LAP5104ABC LAP5105ABC LAP

    180252050R* 4000500R*XXE

    4000301252050L* 4000500L*XXE

    $1,591.00 $1,080.00 $204.00 $107.00 $107.00 $103.00

    F5103NBCF5104NBCF5105NBC

    5103NBC LAP5104NBC LAP5105NBC LAP

    F180252050R* 4000500R*XXE

    4000301252050L* 4000500L*XXE

    $1,796.00 $1,023.00 $465.00 $107.00 $107.00 $103.00

  • Standard Weight/Duty 1-1/2" Offset

    Model

    Complete CloserSpecify Model, Hand &

    Degree(If Hold Open)

    LAP SpecifyModel, Hand &

    Degree(If Hold Open)

    Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

    5103NBC x 1-1/2OS5104NBC x 1-1/2OS5105NBC x 1-1/2OS

    5103NBC LAP5104NBC LAP5105NBC LAP

    180 x 1-1/2OS252060R* 4000500R*XXE

    4000301252060L* 4000500L*XXE

    $1,757.00 $1,023.00 $364.00 $168.00 $107.00 $103.00

    5103ABC x 1-1/2OS5104ABC x 1-1/2OS5105ABC x 1-1/2OS

    5103ABC LAP5104ABC LAP5105ABC LAP

    180 x 1-1/2OS252060R* 4000500R*XXE

    4000301252060L* 4000500L*XXE

    $1,812.00 $1,080.00 $364.00 $168.00 $107.00 $103.00

    F5103NBC x 1-1/2OSF5104NBC x 1-1/2OSF5105NBC x 1-1/2OS

    5103NBC LAP5104NBC LAP5105NBC LAP

    F180 x 1-1/2OS252060R* 4000500R*XXE

    4000301252060L* 4000500L*XXE

    $2,170.00 $1,023.00 $776.00 $168.00 $107.00 $103.00

    Independently Hung (HANGING MEANS AFFECT PRICING AND MUST BE NOTED WHEN ORDERING)

    ModelComplete Closer

    Specify Model, Handand Hanging Means

    LAP SpecifyModel & Hand Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg

    CementCase Pkg

    **F5303NBC**F5304NBC**F5305NBC

    5303NBC LAP5304NBC LAP5305NBC LAP

    N/A 3252010-* 4000600-*XXE 4000301

    $1,543.00 $1,023.00 $317.00 $104.00 $103.00

    **F5313NBC**F5314NBC**F5315NBC

    5313NBC LAP5314NBC LAP5315NBC LAP

    N/A 3252010-* 4000600-*XXE 4000301

    $2,226.00 $1,076.00 $317.00 $104.00 $103.00

    Parallel toFrame

    Perpendicularto Frame

    22

    *Finish required, see page 28NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.

    Shallow DepthOffset Hung Floor Closers

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 27

    List price effective June 8, 2015

    Shal

    low

    Dept

    hFl

    oorC

    lose

    rs

  • 23

    *Finish required, see page 28NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts

    Shallow DepthOffset Hung Floor Closers

    Note that all fire rated openings must have a minimum of one intermediate pivot. See page 46Options on page 27

    List price effective June 8, 2015

    ShallowDepth

    FloorClosers

    Standard Weight/Duty Quick Install

    Model

    Complete CloserSpecify Model,Hand & Degree(If Hold Open)

    LAP SpecifyModel, Hand &

    Degree(If Hold Open)

    Top PivotPkg

    Bottom ArmPkg Floor Plate Pkg

    CementCase Pkg

    IntermediatePivot

    Q5103NBCQ5104NBCQ5105NBC

    Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP

    180222050R* 4000501R*XXE

    4000301 M19222050L* 4000501L*XXE

    $2,004.00 $1,090.00 $204.00 $220.00 $104.00 $103.00 $289.00

    Q5103ABCQ5104ABCQ5105ABC

    Q5103ABC LAPQ5104ABC LAPQ5105ABC LAP

    180222050R* 4000501R*XXE

    4000301 M19222050L* 4000501LXXE*

    $2,058.00 $1,145.00 $204.00 $220.00 $104.00 $103.00 $289.00

    FQ5103NBCFQ5104NBCFQ5105NBC

    Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP

    F180222050R* 4000501R*XXE

    4000301 FM19222050L* 4000501L*XXE

    $2,608.00 $1,090.00 $465.00 $220.00 $104.00 $103.00 $634.00

    QT5103NBCQT5104NBCQT5105NBC

    Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP

    180222050R*

    N/A 4000301 M19222050L*

    $1,900.00 $1,090.00 $204.00 $220.00 $103.00 $289.00

    QT5103ABCQT5104ABCQT5105ABC

    Q5103ABC LAPQ5104ABC LAPQ5105ABC LAP

    180222050R*

    N/A 4000301 M19222050L*

    $1,957.00 $1,145.00 $204.00 $220.00 $103.00 $289.00

    FQT5103NBCFQT5104NBCFQT5105NBC

    Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP

    F180222050R*

    N/A 4000301 FM19222050L*

    $2,506.00 $1,090.00 $465.00 $220.00 $103.00 $634.00

  • 24

    *Finish required, see page 28NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts

    Shallow DepthOffset Hung Floor ClosersNote that all fire rated openings must have a minimum of 3 hinges.

    Options on page 27

    List price effective June 8, 2015

    Shal

    low

    Dept

    hFl

    oorC

    lose

    rs Standard Weight/Duty HM Door and Frame Preps

    Model

    Complete CloserSpecify Model,Hand & Degree(If Hold Open)

    LAP Specify Model,Hand & Degree(If Hold Open)

    Hinge Pkg(3 per pkg)

    BottomArm Pkg

    FloorPlate Pkg

    CementCase Pkg

    HM5103NBCHM5104NBCHM5105NBC

    5103NBC LAP5104NBC LAP5105NBC LAP

    254545*PK222050R*HM 4000501R*XXE

    4000301222050L*HM 4000501L*XXE

    $2,020.00 $1,023.00 $574.00 $220.00 $104.00 $103.00

    HM5103ABCHM5104ABCHM5105ABC

    5103ABC LAP5104ABC LAP5105ABC LAP

    254545*PK222050R*HM 4000501R*XXE

    4000301222050L*HM 4000501L*XXE

    $2,074.00 $1,080.00 $574.00 $220.00 $104.00 $103.00

    FHM5103NBCFHM5104NBCFHM5105NBC

    5103NBC LAP5104NBC LAP5105NBC LAP

    254545*PK222050R*HM 4000501R*XXE

    4000301222050L*HM 4000501L*XXE

    $2,020.00 $1,023.00 $574.00 $220.00 $104.00 $103.00

  • 25

    *Finish required, see page 28NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts

    Shallow DepthCenter Hung Floor Closers

    Options on page 27

    List price effective June 8, 2015

    ShallowDepth

    FloorClosers

    Standard Weight /Duty Single Acting

    Model

    Complete CloserSpecify Model,Hand & Degree(If Hold Open)

    LAP SpecifyModel, Hand &

    Degree(If Hold Open)

    Top PivotPkg

    Bottom ArmPkg

    Floor PlatePkg

    Cement CasePkg

    5013NBC x 5545014NBC x 5545015NBC x 554

    5013NBC LAP5014NBC LAP5015NBC LAP

    340 282554 4000600-*XXE 4000301

    $1,500.00 $1,023.00 $138.00 $138.00 $104.00 $103.00

    5013ABC x 5545014ABC x 5545015ABC x 554

    5013ABC LAP5014ABC LAP5015ABC LAP

    340 282554 4000600-*XXE 4000301

    $1,556.00 $1,080.00 $138.00 $138.00 $104.00 $103.00

    5013NBC5014NBC5015NBC

    5013NBC LAP5014NBC LAP5015NBC LAP

    340 282026* 4000600-*XXE 4000301

    $1,500.00 $1,023.00 $138.00 $138.00 $104.00 $103.00

    5013ABC5014ABC5015ABC

    5013ABC LAP5014ABC LAP5015ABC LAP

    340 282026* 4000600-*XXE 4000301

    $1,556.00 $1,080.00 $138.00 $138.00 $104.00 $103.00

  • 26

    *Finish required, see page 28NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts

    Shallow DepthCenter Hung Floor Closers

    Options on page 27

    List price effective June 8, 2015

    Shal

    low

    Dept

    hFl

    oorC

    lose

    rs Standard Weight/Duty Double Acting

    Model

    Complete CloserSpecify Model,Hand & Degree(If Hold Open)

    LAP SpecifyModel, Hand &

    Degree(If Hold Open)

    Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement CasePkg

    5023NBC5024NBC5025NBC

    5023NBC LAP5024NBC LAP5025NBC LAP

    340 282026* 4000600-*XXE 4000301

    $1,570.00 $1,094.00 $138.00 $138.00 $104.00 $103.00

    5023ABC5024ABC5025ABC

    5023ABC LAP5024ABC LAP5025ABC LAP

    340 282026* 4000600-*XXE 4000301

    $1,626.00 $1,149.00 $138.00 $138.00 $104.00 $103.00

    Patch Fittings Single Acting

    Model

    Complete CloserSpecify Model,Hand & Degree(If Hold Open)

    LAP SpecifyModel, Hand &

    Degree(If Hold Open)

    Top Patch Bottom Patch Floor Plate Cement Case

    5043NBC5044NBC5045NBC

    5043NBC LAP5044NBC LAP5045NBC LAP

    7494*PK 7495*PK 4000600-*XXE 4000301

    $1,717.00 $1,023.00 $291.00 $200.00 $104.00 $103.00

    5043ABC5044ABC5045ABC

    5043ABC LAP5044ABC LAP5045ABC LAP

    7494*PK 7495*PK 4000600-*XXE 4000301

    $1,771.00 $1,080.00 $291.00 $200.00 $104.00 $103.00

  • 27

    Shallow Depth Floor ClosersOptions

    Accessories

    List price effective June 8, 2015

    ShallowDepth

    FloorClosers

    Prefix Description Price

    PH Physically Handicapped 5# of opening force for ADA compliance for interior doors.Rixson will not be responsible if fire door will not completely close when PH productsare supplied.NOTE: Spring sizes are 2 and 3. See catalog.

    $83.00

    DA Delayed Action holds door open at 70 degrees for up to 40 seconds. Closers withthis feature will not have backcheck. DA cannot be ordered with hold open closers $138.00

    W For center hung wood doors using arm 282026. $-

    Suffix

    Ext Spdl To accommodate special floor conditions, the spindle can be ordered with longerspindle 1/2" increments up to and including 2" longer. $68.00

    Torx Security screws. Only provided for screws visible. $226.00

    -20 20 minute UL listing for smoke doors. Do not prefix F. $21.00

    SPLO Special layout that may require special templating and/or products

    Excluded frombuying programConsult factoryfor pricing

    SCSealing a closer protects it from moisture. Cement case and closer body aregasketed and fastened together. Closer must be ordered with cement case andshipped at the same time

    $132.00

    Quick Reference of Options

    2637* Cover Pan for 51 closer, specify depth. $940.00

    2807D* Cover Pan for 53 closer, specify depth. $940.00

    2807B* Cover Pan for 50 closer x 554 flat arm, specify depth.$940.00

    2807A* Cover Pan for 50 closer, centering arm, specify depth.$940.00

    60131 Lock edge applied stop for center hung doors, specify finish$70.00

    1855051 50/51/53 Quickspotter. Quickspotter Installation Tool for 50/51/53$94.00

    *Specify stainless steel or brass

    Door Control Accessories

  • Shallow Depth Floor ClosersHow To Order

    28List price effective June 8, 2015

    Shal

    low

    Dept

    hFl

    oorC

    lose

    rs

    FPrefix

    510Model

    3SpringSize

    NBCFunction

    x 1-1/2" OffsetSuffix x RH Hand

    x 626Finish

    SC SealedCloser

    DA DelayedAction

    PH LighterSpring(ADA)

    F FireRatedDoors

    W Wd Dr(centerhung)

    510 Offset530 Independently

    Hung Parallelto Frame

    531 IndependentlyHungPerpendicularto Frame

    501 Center HungSingle Acting

    502 Center HungDouble Acting

    504 Center Hungwith PatchFittings

    2345

    NBC = Non-HoldOpen

    ABC = AutomaticHold OpenSpecifyDegree

    554 Flat ArmExtendedSpindles

    1-1/2" Offset-20 20 Minute

    LabelLAP Closer

    Body OnlyLFP Less

    Floor PlateLCC Less

    Cement CaseLTP Less Top

    Pivot- Cover Pan(x Depth)

    SPLO SpecialLayout #

    Blank (5020)RH Right HandLH Left Hand

    605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized

    Satin Bronze- Equivalent

    618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright

    Chrome626 Satin Chrome

  • 29

    *Finish required, see page 31Note: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Part

    Specialty Closers

    Options, see page 31

    List price effective June 8, 2015

    SpecialtyClosers

    Duo Chek Double Acting

    ModelComplete CloserSpecify Model

    LAP SpecifyModel

    Top PivotPkg

    Bottom ArmPkg

    Floor PlatePkg

    Cement CasePkg

    1015

    10 LAP15 LAP

    101020* 102026-* 104020-* 103000*

    $1,044.00 $603.00 $144.00 $104.00 $72.00 $126.00

    1216

    12 LAP16 LAP

    101020* 102026-* 104020- 103000-*

    $1,012.00 $571.00 $144.00 $104.00 $72.00 $126.00

    Gate Closers

    ModelComplete CloserSpecify Model

    LAP SpecifyModel

    Top PivotPkg

    Bottom ArmPkg

    Floor PlatePkg

    Cement CasePkg

    354

    X03540370-*

    3541020-* 3542026-* N/A N/A

    355 3551020-* 3542026* N/A N/A

    $1,285.00 $814.00 $237.00 $237.00

    356

    X03540370-*

    3541020-* 3562020-* N/A N/A

    357 3551020-* 3562020* N/A N/A

    $1,285.00 $814.00 $237.00 $237.00

    359 X03540370-* N/A 3592010-* N/A N/A

    $1,279.00 $814.00 $467.00

    Security Closers

    Model

    Complete CloserSpecify Model,Hand & Degree

    (SEC27)

    LAP SpecifyModel, Hand &Degree (SEC27)

    Top Pivot Pkg Bottom Arm Pkg Floor Plate PkgCement Case

    Pkg

    SEC27-180N 27-180N LAP FA180252056R*

    274056*253006R

    252056L* 253006L

    $2,870.00 $1,181.00 $534.00 $190.00 $660.00 $315.00

    Independently Hung

  • 30

    Specialty Closers

    Options, see page 31

    Exterior Gate Closer

    ModelComplete CloserSpecify Model

    1350

    $490.00

    1351

    $569.00

    List price effective June 8, 2015

    Spec

    ialty

    Clos

    ers

    *Finish required, see page 31Non-Hold open OnlyNote: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts

  • 31

    Specialty ClosersOptions

    How To Order

    List price effective June 8, 2015

    SpecialtyClosers

    Prefix Description Price

    PH

    Physically Handicapped 5# of opening force in compliance to ADA standard forinterior doors. If used on exterior or fire doors, the low opening force may not beenough to close the door.Not available on gate closers or SEC closers.

    $83.00

    Suffix Description

    Ext Spdl

    To accommodate special floor conditions, the spindle can be ordered in 1/2"increments up to and including 2" Closer must be ordered with longer spindle, itcannot be field adjusted.Not available on gate closers.

    $68.00

    SPLO Special layout that may require special templating and/or products

    Excluded frombuyingprograms -contact factoryfor pricing

    Quick Reference Options

    How To Order

    Prefix Sec 27ModelN

    Hold Openx LTPSuffix x RHHand

    x 689Finish

    PH LighterSpring(ADA)

    10 Duo Chek(Hold Open)

    12 Duo Chek15 Duo Chek

    (Hold Open)16 Duo Chek354 Gate355 Gate356 Gate357 Gate359 GateSEC27-180 Security1350 Exterior Gate1351 Exterior Gate

    Blank = NotApplicable

    N = Non-HoldOpen

    1-1/2OS 1-1/2" OffsetExt Spdl Extended

    SpindleLAP Less All PartsLFP Less Floor

    PlateLCC Less Cement

    CaseLTP Less Top

    PivotDepth forCover Pan

    SPLO# SpecialLayout

    Blank(10, 12, 15,16, 354, 355,356, 357, 359)RH Right HandLH Left Hand

    605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin

    Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome

    (Sprayed finishes350 Seriesgate closers only)

    689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze693 Sprayed Black -1350

    and 1351696 Sprayed Brass

  • 32List price effective June 8, 2015

  • 33

    DoorControlAccessories

    Door Control Accessories

    List price effective June 8, 2015

    DoorControlAccessories

    *Finish required, stainless steel or brass

    Roller Mate Caster

    Model Description Price

    10600 Single Roller Caster See Page 51

    10602 Double Roller Caster See Page 51

    10600-025 for 10600

    10600-028 for 10602Hollow Metal Reinforced Plate See Page 51

    Special Cement Cases

    Model Description Price

    1101 Cement Case for use with expansion joints, handed See Page 20

    79501 Cement Case for use with shallow floors See Page 20

    25204 Twin Cement Case 1-7/8" Mullion for back to backclosers. Must be ordered with closers See Page 20

    25304 Twin Cement Case 2" Mullion for back to back closers.Must be ordered with closers. See Page 20

    Cover Pans

    Model Description Price

    846* Cover Pan for 27 closer, specify depth, hand. 1-3/4 doors only. See Page 20

    3910* Cover Pan for L27 closer, specify depth, hand. 1-3/4 doors only See Page 20

    2237* Cover Pan for 28 closer x 554 flat arm, specify depth, hand. See Page 20

    841* Cover Pan for 28 closer, centering arm, specify depth, hand. See Page 20

    841B* Cover Pan for H28 and H28 x 587 arm closers, specify depth, hand. See Page 20

    2637* Cover Pan for 51 closer, specify depth, hand. 1-3/4 doors only. See Page 27

    2807D* Cover Pan for 53 closer, specify depth, hand. See Page 27

    2807B* Cover Pan for 50 closer x 554 flat arm, specify depth, hand. See Page 27

    2807A* Cover Pan for 50 closer, centering arm, specify depth, hand. See Page 27

  • 34

    Door

    Cont

    rol

    Acce

    ssor

    ies

    Door Control Accessories

    List price effective June 8, 2015

    Door

    Cont

    rol

    Acce

    ssor

    ies

    Applied Stop

    Model Description Price

    60131Specify Finish

    Lock edge applied stopfor single acting centerhung doors

    See Page 27

    Installation Tools

    Model Description Price

    2604 Pivot Alignment ToolSee Page 51

    2608 Pivot Alignment Tool for L180, H340 and H345

    1859001 27/28/30/40 Quickspotter Installation Tool See Page 20

    1859501 Q27 Quickspotter Installation Tool See Page 20

    1855051 50/51/53 Quickspotter Installation Tool See Page 27

  • 35

    Overhead Concealed ClosersOffset Commodity Grade

    *Finish required, sprayed finishes only see page 39 - Arms are sprayed finishes onlyN = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts

    Options, see page 37

    List price effective June 8, 2015

    OverheadConcealed

    Closers

    Offset Hung

    ModelComplete CloserSpecify Model and

    Degree(If Hold Open)

    LAP SpecifyModel and Degree(If Hold Open)

    MountingBracket/Channel

    Top Arm & RailPackage Cover Plate Pkg

    0608 608 LAP 608019 06082012-* N/A

    $699.00 $447.00 $50.00 $204.00

    M0608 608 LAP 608049PKG 06082012-* 6084000*

    $948.00 $447.00 $186.00 $204.00 $114.00

    MW0608 608 LAP 608049PKG 06082012-* 6084000*

    $948.00 $447.00 $186.00 $204.00 $114.00

    W0608 608 LAP 608049PKG 06082012-* 6084000*

    $948.00 $447.00 $186.00 $204.00 $114.00

    AW0608 608 LAP 608019 06082012-* N/A

    $699.00 $447.00 $50.00 $204.00

    See model 547 pivot set on page 44 as a method to hang doors.

    Pricing for 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or door thicknesses,consult factory. Prices will be affected and will not carry any buy program or quote discounting.

  • 36

    Overhead Concealed ClosersCenter Hung Commodity Grade

    *Finish required, sprayed finishes only see page 37N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts

    Options, see page 37

    Center Hung

    List price effective June 8, 2015

    Over

    head

    Conc

    eale

    dCl

    oser

    s

    ModelComplete CloserSpecify Model and

    Degree(If Hold Open)

    LAP SpecifyModel andDegree (IfHold Open)

    MountingBracket/Channel

    Top ArmPackage

    Bottom PivotPackage

    Cover PlatePkg

    608EL 608 LAP 608019 6002020 608011A N/A

    $705.00 $447.00 $50.00 $71.00 $139.00

    608SL 608 LAP 608019 608005S 608011A NA

    $705.00 $447.00 $50.00 $71.00 $139.00

    M608 608 LAP 608049PKG 6002020 608011A 6084000*

    $953.00 $447.00 $186.00 $71.00 $139.00 $114.00

    MW608 608 LAP 608049PKG 6002021 608011A 6084000*

    $953.00 $447.00 $186.00 $71.00 $139.00 $114.00

    W608 608 LAP 608049PKG 6002021 608011A 6084000*

    $953.00 $447.00 $186.00 $71.00 $139.00 $114.00

    AW608 608 LAP 608019 6002021 608011A N/A

    $705.00 $447.00 $50.00 $71.00 $139.00

  • 37

    Overhead Concealed ClosersCommodity Grade

    OptionsHow to Order

    List price effective June 8, 2015

    OverheadConcealed

    Closers

    Suffix Description Price1/2 Ext Spdle Longer spindle for unique head conditions $170.00

    Quick Reference of Options

    How To Order

    Commodity Grade Closer Model

    M608Model

    90AHold Openor Not

    x 1/2" Ext SpdlSuffix

    x 626Finish

    Offset Hung0608 Aluminum Dr & FrM0608 Metal Dr & FrMW0608 Wood Dr & Metal FrW0608 Wood Dr and FrAW0608 Wood Dr and Alum FrCenter Hung608EL End Load Arm Alum Dr & Fr608SL Side Load Arm Alum Dr & FrM608 Metal Dr & FrMW608 Wood Dr & Metal FrW608 Wood Dr & FrAW608 Wood Dr and Alum Fr

    90A Hold Open105A Hold OpenN Non-Hold

    Open

    1/2" ExtendedSpindle

    605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin

    Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin ChromeFor Arms Only689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass

  • 38

    Overhead Concealed ClosersOffset Architectural Grade

    Offset Hung

    ModelComplete CloserSpecify ModelSize, Handand Degree

    LAP SpecifyModel Size,Hand andDegree

    MountingBracket/Channel/

    PlateTop Arm & Rail

    PackageCover Plate

    Pkg

    070607070708

    706 LAP707 LAP708 LAP

    1639000

    0800012R*

    N/A

    0800012L*

    $1,760.00 $1,455.00 $59.00 $248.00

    M0706M0707M0708

    706 LAP707 LAP708 LAP

    01920910

    0800012R* 7004000R*

    0800012L* 7004000L*

    $2,047.00 $1,455.00 $178.00 $248.00 $171.00

    MW0706MW0707MW0708

    706 LAP707 LAP708 LAP

    01920910

    0800011R* 7004000R*

    0800011L* 7004000L*

    $2,047.00 $1,455.00 $178.00 $248.00 $171.00

    W0706W0707W0708

    706 LAP707 LAP708 LAP

    01980910

    0800011R* 7004000R*

    0800011L* 7004000L*

    $2,047.00 $1,455.00 $178.00 $248.00 $171.00

    List price effective June 8, 2015

    Over

    head

    Conc

    eale

    dCl

    oser

    s

    Options, see page 41

    *Finish required, see page 41N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts

    See model 547 pivot on page 41 as a method to hang doors.

    Pricing for 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or door thicknesses,consult factory. Prices will be affected and will not carry any buy program or quote discounting.

  • 39

    Overhead Concealed ClosersCenter Architectural Grade

    *Finish required, see page 41N = Non-Hold open A = Automatic Hold OpenLAP= Less All Parts

    Options, see page 41

    List price effective June 8, 2015

    OverheadConcealed

    Closers

    Center Hung Single Acting

    ModelComplete

    Closer SpecifyModel Size,Hand andDegree

    LAP SpecifyModel Size,Hand andDegree

    MountingBracket/Channel/Plate

    Top ArmPackage

    Bottom PivotPackage

    Cover PlatePackage

    706707708

    706 LAP707 LAP708 LAP

    1639000 8002020 2183020 N/A

    $1,799.00 $1,455.00 $59.00 $123.00 $168.00

    M706M707M708

    706 LAP707 LAP708 LAP

    1929000 8002020 2183020

    7004000R

    7004000L*

    $2,088.00 $1,455.00 $178.00 $123.00 $168.00 $171.00

    MW706MW707MW708

    706 LAP707 LAP708 LAP

    1929000 8002021 2183020

    7004000R*

    7004000L*

    $2,124.00 $1,455.00 $178.00 $160.00 $168.00 $171.00

    W706W707W708

    706 LAP707 LAP708 LAP

    1989000 8002021 2183020

    7004000R*

    7004000L*

    $2,124.00 $1,455.00 $178.00 $160.00 $168.00 $171.00

  • 40

    Overhead Concealed ClosersCenter Hung Architectural Grade

    *Finish required, see page 41N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts

    Options, see page 41

    List price effective June 8, 2015

    Over

    head

    Conc

    eale

    dCl

    oser

    s

    Center Hung Double Acting

    ModelComplete

    Closer SpecifyModel Sizeand Degree

    LAP SpecifyModel Sizeand Degree

    MountingBracket/Channel/Plate

    Top ArmPackage

    Bottom PivotPackage

    Cover PlatePackage

    806807808

    806 LAP807 LAP808 LAP

    1639000 8002020 2183020 N/A

    $1,799.00 $1,455.00 $59.00 $123.00 $168.00

    M806M807M808

    806 LAP807 LAP808 LAP

    1929000 8002020 2183020 8004000*

    $2,088.00 $1,455.00 $178.00 $123.00 $168.00 $171.00

    MW806MW807MW808

    806 LAP807 LAP808 LAP

    1929000 8002021 2183020 8004000*

    $2,124.00 $1,455.00 $178.00 $160.00 $168.00 $171.00

    W806W807W808

    806 LAP807 LAP808 LAP

    1989000 8002021 2183020 8004000*

    $2,124.00 $1,455.00 $178.00 $160.00 $168.00 $171.00

  • 41

    Overhead Concealed ClosersArchitectural Grade

    OptionsHow to Order

    List price effective June 8, 2015

    OverheadConcealed

    Closers

    Suffix Description Price

    1/2 Ext Spdle Longer spindle for unique frame conditions $346.00

    199 Decorative end caps for center hung wood doors $86.00

    SPLO Special templating and products Excluded frombuying programs- contact factoryfor pricing

    How To Order

    Architectural Grade Closer Models 700 & 800

    M706Model (specify spring size 6, 7, or 8)

    90ADegree

    x 1/2" Ext SpdlSuffix

    x RHHand

    x 626Finish

    Offset Hung0700 Aluminum Dr & FrM0700 Metal Dr & FrMW0700 Wood Dr & Metal FrW0700 Wood Dr and FrSingle Acting Center Hung700 Aluminum Dr. & FrM700 Metal Dr & FrMW700 Wood Dr & Metal FrW700 Wood Dr & FrDouble Acting Center Hung800 Aluminum Dr & FrM800 Metal Dr & FrMW800 Wood Dr & Metal FrW800 Wood Dr & Fr

    90A HoldOpen

    105A HoldOpen

    90N Non-HoldOpen

    105N Non-HoldOpen

    1/2" ExtendedSpindle

    SPLO SpecialMaterialLayout

    Blank Dbl ActingRH Right HandLH Left Hand

    605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin

    Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin ChromeALL ARMS689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass

  • 42List price effective June 8, 2015

  • 43

    Pivots and Pivot SetsOffset Hung Pivot Sets

    Options on page 51

    *Finish required, see page 51

    List price effective June 8, 2015

    Pivots&

    PivotSets

    Offset Hung Pivot Sets

    Model Description Painted Plated

    117-1/4 3/4 Offset (includes 180 top pivot) N/A $441.00

    117 3/4 Offset (includes 180 top pivot) N/A $441.00

    117 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $738.00

    F117 Fire rated 3/4 Offset (includes F180 top pivot) $464.00 $776.00

    F117 x 1-1/2OS Fire rated 1-1/2 Offset (includes F180 top pivot) $714.00 $1,159.00

    117-20 3/4 Offset x 20 min (includes 180 - 20 top pivot) N/A $460.00

    173 3/4 Offset (includes 180 top pivot) N/A $297.00

    147 3/4 Offset (includes 180 top pivot) N/A $625.00

    147 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $859.00

    F147 Fire rated 3/4 Offset (includes F180 top pivot) $659.00 $942.00

    F147 x 1-1/2OSFire rated 1-1/2 Offset (includes F180 x 1-1/2OStop pivot) $880.00 $1,255.00

    147-20 3/4 Offset x 20 min (includes 180-20 top pivot) N/A $638.00

    147-20 x 1-1/2OS 1-1/2 Offset (includes 180-20 top pivot) N/A $866.00

    L147 3/4 Offset x1-3/4 door (includes L180 top pivot) N/A $873.00

    L147 3/4 Offset x 2, 2-1/4, 2-1/2 or 3 doors (includesL180 top pivot)N/A $1,262.00

    FL147 Fire rated 3/4 Offset x 1-3/4 door (includes FL180top pivot)$905.00 $1,245.00

    L147-20 3/4 Offset x 1-3/4 door (includes L180-20 top pivot) N/A $884.00

  • 44

    Pivots and Pivot SetsOffset Hung Pivot Sets

    Options on page 51

    *Finish required, see page 51

    Offset Hung Pivot Sets

    Model Description Painted Plated

    547 3/4 Offset (includes 2 each M190 intermediatepivots)

    N/A $699.00

    F547 Fire rated 3/4 Offset (includes 2 each FM190intermediate pivots) $699.00 $1,016.00

    165 3/4 Offset (includes 180 top pivot and 2 each M190intermediate pivots)N/A $941.00

    195 3/4 Offset (includes 180 top pivot) N/A $608.00

    F195 Fire rated Offset (includes F180 top Pivot) N/A $995.00

    117-1/2 3/4 Offset (includes 180 top pivot) N/A $932.00

    117-1/2 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $1,150.00

    117-1/2-20 3/4 Offset 20 min (includes 180-20 top pivot) N/A $948.00

    F117-1/2 Fire rated 3/4 Offset (includes F180 top pivot) $944.00 $1,159.00

    F117-1/2 x 1-1/2OSFire rated 1-1/2 Offset (includes F180 x 1-1/2OStop pivot) $1,180.00 $1,566.00

    L117 3/4 Offset x 1-3/4 door (includes L180 top pivot) N/A $1,267.00

    L117 3/4 Offset x 2, 2-1/4, 2-1/2 or 3 doors (includesL180 top pivot)N/A $1,654.00

    FL117 Fire rated 3/4 Offset x 1-3/4 door (includes FL180top pivot)$1,304.00 $1,650.00

    L117-203/4 Offset x 20 min x 1-3/4 door (includes L180-20top pivot) N/A $1,286.00

    List price effective June 8, 2015

    Pivo

    ts&

    Pivo

    tSet

    s

  • 45

    Pivots and Pivot SetsOffset Hung Top Pivots

    Options on page 51

    Offset Hung Top Pivot

    Model Description Painted Plated

    180 3/4 Offset N/A $204.00

    180 x 1-1/2OS 1-1/2 Offset N/A $363.00

    H180 3/4 Offset N/A $275.00

    H180 x 1-1/2OS 1-1/2 Offset N/A $436.00

    F180 Fire rated 3/4 Offset $229.00 $465.00

    F180 x 1-1/2OS Fire rated 1-1/2 Offset $385.00 $776.00

    FH180 Fire rated 3/4 Offset $298.00 $586.00

    180-20 3/4 Offset x 20 min N/A $220.00

    180-20 x 1-1/2OS 1-1/2 Offset x 20 min N/A $376.00

    H180-20 3/4 Offset x 20 min N/A $291.00

    L180 3/4 Offset x 1-3/4 door N/A $338.00

    L180 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $509.00

    L180-20 3/4 Offset x 20 min x 1-3/4 door only N/A $349.00

    FL180 Fire rated 3/4 Offset x 1-3/4 door only $351.00 $706.00

    FA180 3/4 Offset $279.00 $534.00

    180 x 102 3/4 Offset N/A $328.00

    180 x 102 x 1-1/2OS 1-1/2 Offset N/A $480.00

    280 3/4 Offset N/A $289.00

    F280 Fire rated 3/4 Offset $324.00 $620.00

    280-20 3/4 Offset x 20 min N/A $305.00

    380 3/4 Offset N/A $289.00

    F380 Fire rated 3/4 Offset $324.00 $638.00

    380-20 3/4 Offset x 20 min N/A $305.00

    L380 3/4 Offset x 1-3/4 door only N/A $485.00

    L380 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $669.00

    FL380 Fire rated 3/4 Offset x 1-3/4 door only $516.00 $851.00

    L380-20 3/4 Offset x 20 min x 1-3/4 door only N/A $499.00

    480 3/4 Offset N/A $355.00

    F480 Fire rated 3/4 Offset $393.00 $691.00

    480-20 3/4 Offset x 20 min N/A $376.00

    680 3/4 Offset N/A $388.00

    *Finish required, see page 51

    List price effective June 8, 2015

    Pivots&

    PivotSets

  • 46

    Note that all fire rated openings must havea minimum of one intermediate pivot

    *Finish required, see page 51

    Pivots and Pivot SetsIntermediate Pivots

    Intermediate Pivots

    Model Description Painted Plated

    M19 3/4 Offset N/A $289.00

    M19 x 1-1/2OS 1-1/2 Offset N/A $456.00

    FM19 Fire rated 3/4 Offset $328.00 $634.00

    FM19 x 1-1/2OS Fire rated 1-1/2 Offset $489.00 $949.00

    M190 3/4 Offset N/A $370.00

    M190 x 1-1/2OS 1-1/2 Offset N/A $519.00

    FM190 Fire rated 3/4 Offset $411.00 $780.00

    FM190 x 1-1/2OS Fire rated 1-1/2 Offset $564.00 $944.00

    M19-20 3/4 Offset x 20 min N/A $307.00

    M19-20 x 1-1/2OS 1-1/2 Offset x 20 min N/A $476.00

    M190-20 3/4 Offset x 20 min N/A $380.00

    ML19 3/4 Offset x 1-3/4 door only N/A $438.00

    ML19 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $622.00

    FML19 Fire rated 3/4 Offset x 1-3/4 door only $473.00 $916.00

    ML19-20 3/4 Offset x 20 min x 1-3/4 door only N/A $459.00

    FA19 3/4 Offset $370.00 $706.00

    FA190 3/4 Offset $467.00 $706.00

    119 3/4 Offset N/A $225.00

    219 3/4 Offset N/A $321.00

    219-20 3/4 Offset x 20 min N/A $366.00

    319 3/4 Offset N/A $321.00

    319-20 3/4 Offset x 20 min N/A $366.00

    L319 3/4 Offset x 1-3/4 door only N/A $539.00

    L319-20 3/4 Offset x 20 min x 1-3/4 door only N/A $559.00

    419 3/4 Offset N/A $374.00

    419-20 3/4 Offset x 20 min N/A $423.00

    List price effective June 8, 2015

    Pivo

    ts&

    Pivo

    tSet

    s

  • 47

    *Finish required, see page 51

    Pivots and Pivot SetsElectrified Intermediate Pivots

    & Pocket Pivots

    Electrified Intermediate Pivots

    Pocket Pivot

    Model Number Description Price

    CSM19 3/4" Offset Monitor PivotElectroLynx not available$680.00

    CSM19 x 1-1/2OS 1-1/2" Offset Monitor PivotElectroLynx not available$866.00

    CSEM19 3/4" Offset Monitor & Power Transfer PivotSpecify number of wires (4, 6, 8,12 for power transfer only)$942.00

    CSEM19 x 1-1/2OS 1-1/2" Offset Monitor & Power Transfer PivotSpecify number of wires (4, 6, 8,12 for power transfer only)$1,614.00

    CSML19 3/4" Offset Monitor Pivot Heavy Weight/High Traffic1-3/4" Door. ElectroLynx not available$1,235.00

    EFM19 Fire Rated 3/4" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12)$1,148.00

    EM19 x 1-1/2OS 1-1/2" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12)$768.00

    EFML19Fire rated 3/4" Offset Power Transfer Pivot Heavy Weight/HighTraffic 1-3/4" Dr.Specify number of wires (4, 6, 8, 12)

    $1,735.00

    EML193/4" Offset Power Transfer Pivot Heavy Duty/Weight/HighTraffic 1-3/4 DrSpecify number os wires (4, 6, 8, 12)

    $1,229.00

    EM19U3/4" Offset Power Transfer High Inrush Pivot(2 wires only)ElectroLynx not available

    $1,045.00

    EM19 3/4" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12)$543.00

    Model Number Description Painted Plated

    F519 Pocket Pivot $459.00 $559.00

    EF519 Electrified Power Transfer PivotAvailable in 4 wires only NA$1,036.00

    List price effective June 8, 2015

    Pivots&

    PivotSets

    ElectroLynx add $33.00 . Specify # of wires (4, 6, 8, 12).

    ElectroLynxAs part of their promise to provide innovative, fast and effective, and higher securitysolutions to their customers, ASSA ABLOY Group companies offer ElectroLynx, auniversal quick-connect system that simplifies the electrification of the door opening.ElectroLynx is a registered trademark of ASSA ABLOY, Inc.

  • 48

    Options on page 53

    *Finish required, see page 51

    Pivots and Pivot SetsCenter Hung Pivot Sets

    Center Hung Pivot Sets

    Model Description Price

    127-3/4Center Hung side jamb attached (includes 320top pivot)

    $289.00

    128-3/4 Center Hung (includes 320 top pivot) $289.00

    370 Center Hung (includes 340 top pivot) $426.00

    117-3/4 Center Hung (includes 340 top pivot) $876.00

    H117-3/4 Center Hung for doors 2" or greater (includes H340 top pivot) $2,138.00

    H117-3/4 587 Center Hung for doors 1-3/4 (includes H340 top pivot) $2,138.00

    178 Patch fitting pivot (includes 7494 top pivot) $629.00

    176 Center Hung Light Duty Pivot $297.00

    List price effective June 8, 2015

    Pivo

    ts&

    Pivo

    tSet

    s

  • 49

    Pivots and Pivot SetsCenter Hung Top Pivots

    Options on page 53

    *Finish required, see page 51

    Model Description Price

    320 Center Hung $144.00

    340 Center Hung $138.00

    H340 Center Hung $441.00

    345 Center Hung long throw pivot pin $441.00

    H345 Center Hung long throw pivot pin $741.00

    340 x AP3 Center Hung gate pivot $417.00

    320 x 102 Center Hung for deep reveal(No finish plate included)$271.00

    340 x 102 Center Hung for deep reveal(No finish plate included)$271.00

    Center Hung Top Pivots

    List price effective June 8, 2015

    Pivots&

    PivotSets

  • 50

    Pivots and Pivot SetsElectrified Center Hung Top Pivots

    *Finish required, see page 51

    Specify # of wires (4,6,8,12)ElectroLynx add $33.00

    Electrified Center Hung Top Pivots

    Model Description Price

    EH340 Center Hung Heavy Duty for Power Transfer Top Pivot $594.00

    EH345 Center Hung Longer Throw Pin Heavy Duty for TallerDoors for Power Transfer$1,012.00

    CS340Center Hung Heavy Duty for Door Monitoring TopPivotElectroLynx not available

    $636.00

    CS345Center Hung Longer Throw Heavy Duty for TallerDoors for MonitoringElectroLynx not available

    $991.00

    List price effective June 8, 2015

    Pivo

    ts&

    Pivo

    tSet

    s

    ElectroLynxAs part of their promise to provide innovative, fast and effective, and higher securitysolutions to their customers, ASSA ABLOY Group companies offer ElectroLynx, auniversal quick-connect system that simplifies the electrification of the door opening.ElectroLynx is a registered trademark of ASSA ABLOY, Inc.

  • 51

    Pivots and Pivot SetsOptions

    Accessories How To Order

    Suffix Description PriceExt Spdl To accommodate special floor conditions, the spindle can be ordered in 1/2"

    increments up to and including 2". Pivots must be ordered with longer spindle.Extended spindles for 117-1/4, 117, 147, 547,195, 127-3/4, 128-3/4, 370

    $57.00

    Extended spindles for 117-1/2, L117, 117-3/4, H117-3/4 and H117-3/4 x 587 $101.00

    Longer Pivot Pin For top pivots with special ceiling condition, longer pins are available in 1/4 inchincrements up to 3/4 longer. Not available for electrified pivotsAdd $40.00

    Torx

    Security ScrewsNot available for center hung models

    Pivot SetAdd $196.00Intermediate PivotsAdd $131.00

    SPLO Special layout that may require special templating and/or productsExcluded from buyingprograms - contactfactory for pricing

    Quick Reference Options

    How To Order

    FPrefix

    L147Model

    x 2-1/4" DoorSuffix

    x RHHand

    x 626Finish

    F Fire RatedDoors

    117-1/4117173147L147547165195117-1-1/2L117127-3/4128-3/4370117-3/4H117-3/4178176

    1-1/2OS 1-1/2" Offset2"2-1/4" Door Thickness2-1/2" L Series Product Only3"587 H Arm (H117-3/4)Ext Spdl Extended Spindle-20 20 Minute labelLTP Less Top Pivot

    # of Wires for ElectrifiedProduct

    TORX Security Screws(Offset Only)

    SPLO# Special Layout

    Blank (CenterHung)

    RH RightLH Left

    605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin Bronze -

    Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass

    List price effective June 8, 2015

    Pivots&

    PivotSets

    Accessories

    Model Description Price

    10600 Single Roller Caster $676.00

    10602 Double Roller Caster $1,012.00

    10600-025 for 10600

    10600-028 for 10602Hollow Metal Reinforced Plate $204.00

    10600-019 End Cap $27.00

    2604

    2608 for 180, H340and H345

    Pivot Alignment Tool $101.00

    }

  • 52List price effective June 8, 2015

  • 53

    * Butt hung only** 652 Not available in multi-function models**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or doorthicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.

    Checkmate Stops and HoldersConcealed Stops and Holders

    #1 Series Concealed Heavy Duty Options, see page 57

    Model Door Opening (inches) Finishes

    Friction Hold Open Stop **ButtsOffset PivotsCenter Hung

    Pivots689, 690, 691,696, 652

    606, 612,613, 630

    605, 611,613E, 619,

    618, 622, 629

    1-116 1-126 1-136 *24-28 NA

    $304.00 $428.00 $497.00

    1-216 1-226 1-236 28 1/16-33 30-36

    1-316 1-326 1-336 33 1/16-38 36 1/16-41

    1-416 1-426 1-436 38 1/16-43 41 1/16-46

    1-516 1-526 1-536 43 1/16-48 46 1/16-50

    #1ADJ Series Concealed Adjustable Heavy Duty

    Model Door Opening (inches) Finishes

    Hold Open Stop **ButtsOffset PivotsCenter Hung

    Pivots689, 690, 691,696, 652

    606, 612,613, 630

    605, 611, 613E,619, 618, 622,

    6291ADJ-126 1ADJ-136 *24-28 NA

    $317.00 $447.00 $521.00

    1ADJ-226 1ADJ-236 28 1/16-33 30-36

    1ADJ-326 1ADJ-336 33 1/16-38 36 1/16-41

    1ADJ-426 1ADJ-436 38 1/16-43 41 1/16-46

    1ADJ-526 1ADJ-536 43 1/16-48 46 1/16-50

    #2 Series Concealed Adjustable Standard Duty

    Model Door Opening (inches) Finishes

    Friction HoldOpen StopMulti-

    Function**Butts

    Offset PivotsCenter Hung

    Pivots

    652**, 689,690,

    691, 696,

    606, 612,613, 630

    605, 611,613E, 618,

    619, 622, 6292-116 2-126 2-136 2-146 *18-24 NA

    $139.00 $161.00 $206.00

    2-216 2-226 2-236 2-246 24 1/16-30 27-32

    2-316 2-326 2-336 2-346 30 1/16-36 32 1/16-38-1/2

    2-416 2-426 2-436 2-446 36 1/16-42 38 9/16-45

    2-516 2-526 2-536 2-546 42 1/16-48 45 1/16-48

    #5 Series Concealed Standard Duty

    Model Door Opening (inches) Finishes

    Hold Open Stop **ButtsOffset Pivots Center Hung 689, 690, 691, 696, 652

    5-126 5-136 *18-24 NA

    $129.00

    5-226 5-236 24 1/16-30 27-32

    5-326 5-336 30 1/16-36 32 1/16-38 1/2

    5-426 5-436 36 1/16-42 38 9/16-45

    5-526 5-536 42 1/16-48 45 1/16-48

    List price effective June 8, 2015

    Checkmate

    Stops&

    Holders

  • 54

    * Butt hung only** Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.

    Checkmate Stops and Holder