2014 SBS Big Bike Book: Tools

2014BIG BIKE BOOK

TOOLS

Tools

567800-283-2453

Lubricants & Care Products - Degreaser


Aerosols and certain fluids considered to be hazardous materials cannot be shipped by air.

They can only be shipped by ground transportation.

Finish Line 1-Step Cleaner & LubeFinish Line’s 1-Step is engineered for commuters and recreational cyclists who seek a quick one-step clean and lube formulation. As 1-Step loosens and removes surface grime, it delivers a clean low friction film of lubricant. 1-Step Cleaner & Lubricant prevents premature component wear while reducing pedaling friction and drive-train noise.

SKU Size Dispenser MSRP

142744 4 oz Drip $7.99142745 6 oz Aerosol $8.99133039 12 oz Aerosol $11.99

Finish Line Chill Zone Penetrating OilChill Zone loosens and lubricates rusted bike parts like: a frozen crank bolt, a rusted derailleur spring, or a seized seat post. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone features special refrigerant / propellant that freezes metal as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the rust. A penetrating release agent then breaks down and flushes out the rust.


157664 6 oz Aerosol $9.99

Finish Line Citrus DegreaserCuts through grime like no other solvent, with a fresh citrus scent. *Land ship only.


119608 12 oz Aerosol $9.99123190 20 oz Bottle $13.99119607 1 gal. Jug $99.99

Finish Line Multi DegreaserUnlike citrus degreasers, will not damage rubber or plastic. Natural, nontoxic, and biodegradable.


103870 12 oz Aerosol $9.99123191 20 oz Bottle $13.99120327 1 gal. Jug $69.99

Finish Line Speed CleanFeatures two advances in cleaning chemistry. Strips all grime off quickly. Cleans w/ no oily residue left over, evaporates for a workable surface.


131725 17 oz Aerosol $11.99

142744 1-Step Cleaner & Lube

119608 Citrus Degreaser

103870 Multi Degreaser

131725 Speed Clean

Tools

SEATTLEBIKESUPPLY.COM568


Park CB-2 Chainbrite Cleaner100% biodegradable, promotes smoother shifting, flip top lid for easy pouring. 16 oz. *Land ship only.

SKU Model No. Size MSRP

132252 CB-2 16 oz $12.95

Pedro’s OrangePeelz DegreaserCitrus-based degreaser penetrates quickly to removes stubborn grease and grime for quick cleaning of all non-painted surfaces. Low surface tension insures superior penetration into hard-to-reach areas.


102495 16 oz Bottle $14.00

Simple Green Bike CleanerSimple Green bike cleaner is a non-toxic, biodegradable, non-corrosive and nonflammable cleaner specially formulated to meet the cleaning and maintenance needs of today’s riders. Foaming formula sticks to vertical and horizontal surfaces while removing grease, oil, dirt and road grime from chains and other components. Land ship only.


124619 20 oz Aerosol $9.99158934 24 oz Trigger $9.99

Tri Flow Foaming Citrus Cleaner DegreaserQuickly clean and degrease the dirtiest drivetrains and parts. The powerful foaming action loosens grease, oil and hardened deposits leaving surfaces clean and residue free. This water-soluble, biode-gradable, citrus-based formula can easily be rinsed with water. Foaming formula sticks to where it is sprayed. Use for those really tough cleaning jobs.


140392 10 oz Spray $12.24

Tri Flow Rapid CleanTri-Flow Rapid Clean is an all purpose cleaner that degreases and removes oils, dirt and mud w/ no contaminant-attracting residue or solvent runoff. Cleans surface and evaporates dry.


140393 15 oz Aerosol $11.52

WD-40 Bike Heavy Duty DegreaserSafely dissolves and removes grease from frames and drivetrains. Thick, biodegradable formula clings to surfaces for effective cleaning. Safe for carbon fiber, titanium, aluminum, steel, chrome, rubber or plastic.


158652 20 oz Bottle $14.99159596 1 Gallon Bottle $54.99

132252 CB-2 Chainbrite Cleaner

102495 OrangePeelz Degreaser

124619 Bike Cleaner 140392 Foaming Citrus Cleaner Degreaser

140393 Rapid Clean 158652 Heavy Duty Degreaser

Tools

569800-283-2453

Lubricants & Care Products - Grease

White Lightning Bamboo Cycle WipesWhite Lightning Bamboo Cycle Wipes are tough and tear resistant. They have a waffled texture that absorbs more grease and grime than ordinary wipes and are treated w/ a solution that is strong enough to clean a bicycle chain, yet safe enough to clean hands. Use one Cycle Wipe to clean an entire bicycle including the frame, drivetrain, bars, stem, and saddle. Or clean your hands after a repair on a dirty machine. Bamboo Cycle Wipes are a sustainable and renewable resource, and are biodegradable.

SKU Quantity MSRP

157672 6 / Box $5.99

White Lightning Clean Streak Metal PrepBreaks down oils and grease, works rapidly, dries completely, leaves no residue.


125682 12 oz Aerosol $9.79133071 23 oz Aerosol $12.99




Finish Line Anti-Seize Assembly Lubricant 3 PkgSpecially formulated anti-seize compound that prevents galling and cold welding of titanium components. Also works great as a conventional anti-seize for metal parts.

SKU Dispenser MSRP

132936 Tube $4.99

Finish Line Ceramic GreaseCeramic Grease represents Finish Line’s most advanced bearing lubrication technology. Formulated w/ sub-micron ceramic particles and premium non-toxic synthetic oils. Designed to optimize the performance and extend the life of bottom bracket, hub and headset bearings.


140077 2 oz Tube $7.99140078 1 lb Tub $25.99

Finish Line Extreme Fluoro GreaseExtreme Fluoro Grease is made w/ 100% pure DuPont fluorinated ingredients. Recommended for precision parts and especially bearings (including ceramic). Perfect for those seeking a significant drop in friction and maximum protection against extreme pressures and/or extreme rotational heat. Also works great on cable wires, derailleur pivots, stanchions, gaskets, pedal springs and as a 'clean' alternative to conventional anti-seize compounds.


157668 20g Syringe $14.95

125682 Clean Streak Metal Prep

132936 Anti-Seize Assembly Lubricant 3 Pkg

140077 Ceramic Grease

Tools



Finish Line Fiber Grip Carbon Assembly GelFiber Grip has been designed to create friction and reduce slippage between clamped carbon surfaces. Apply Fiber Grip to clamping areas of: Stems; Handlebars; Seat posts, and Seat tubes.


140076 1 lb Tub $34.95140075 1.75 oz Tube $7.99

Finish Line Grease GunFits all standard 9/16" grease tubes. Long-reach nozzle, carded. Grease not included, nozzle only.

SKU MSRP

130884 $21.99

Finish Line Premium GreaseTotally repels water. Extends bearing life. Won't thicken in cold.


119318 1 lb Tub $21.99100411 3.5 oz Tube $3.99

FSA Carbon Installation Compound For use w/ carbon parts and accessories.

SKU Size MSRP

139347 5g $6.99139348 80g $29.99

Park ASC-1 Anti -Seize CompoundReduces friction in threaded and press fit connections.Ideal for BB and pedal threads, pressed headset cups, seatposts... etc.Also helps prevent corrosion.


136868 ASC-1 4 oz $8.59

Park Polylube GreaseThe synthetic base has extremely high load carrying capabilities.

SKU Model No. Size Dispenser MSRP

118700 PPL-1 4 oz Tube $5.95118701 PPL-2 1 lb Tub $15.95

Park SAC-2 Supergrip Carbon & Alloy Assembly CompoundHelps create a tighter grip between two slippery surfaces. Ideal for carbon, aluminum and steel seatposts, handlebars and stems. 4 oz. (118 ml) tube.Note: Not for threaded surfaces. Do not use for bearing lubrication.

SKU Model No. MSRP

151529 Sac-2 $11.95

140076 Fiber Grip Carbon Assembly Gel

130884 Grease Gun

100411 Premium Grease 139347 Carbon Installation Compound

136868 ASC-1 Anti - Seize Compound

118700 Polylube Grease

151529 SAC-2 Supergrip Carbon & Alloy Assembly Compound

Tools

571800-283-2453


Phil Wood GreasePremium waterproof grease prevents rust and corrosion under severe wet conditions. This is the grease that has been tested and achieved "premium" lubricant status from major bearing manufac-tures worldwide.


117912 3 oz Tube

Progold EPX GreaseEPX’s outstanding high temperature melting point combined w/ rust and corrosion inhibitors provides excellent performance under the most aggressive riding conditions. Comes in a convenient 2 oz squeeze dispenser and a shop sized 1 lb tub. • Not recommended for use on bolt threads.


156625 3 oz Tube $5.70140667 1 lb Tub $13.00

Tri Flow High Performance Synthetic GreaseThis non-melting, waterproof formula is designed to seal out water and contaminates to prevent rust and corrosion. Pure synthetic formula is fully compatible with most rubbers and plastics.


125429 3 oz Tube $11.19

Tri Flow Red GreaseTri-Flow Red Grease is a premium quality, extreme pressure, multi purpose waterproof grease. Aerosol can will allow you to aim where you want the grease to go, instead of smearing. Red Grease is outstand-ing for high temperature applications, provides an excellent seal on bearings, has a high load carrying capacity, and resists oxidation and corrosion.


140390 6.25 oz Aerosol $14.32

Wheelsmith Spoke Prep, Orange & BlueLubricates threads, secures nipples, and prevents corrosion. Two pack.


120838 15ml each Bottles

117912 Grease

125429 High Performance Synthetic Grease

140390 Red Grease

120838 Spoke Prep, Orange & Blue

Tools



White Lightning Crystal GreaseCrystal Grease is a clear, non-toxic & non-staining grease that is so free of 'nasty stuff' it has passed food grade standards! Completely safe to use, no harm to user, parts, paints, clothing, leathers or vinyl.


154256 3.5 oz Tube $7.99142750 1 lb Tub $22.99

Lubricants & Care Products - Hydraulic Brake Fluid



Avid 5.1 DOT Brake FluidSKU Size Spec's MSRP

131208 4 oz 5.1 DOT $12.00

Avid Pro Disc Brake Bleed Kit (DOT 5.1)• Durable syringe w/ replaceable seals • Steel plunger • Ergonomic plunger handle • Aluminum hose couplings • Rotating steel fittings w/ knurled surface treatment • High-volume hose w/ clamp, 4 aluminum hose fittings, 4 threaded hose barbs

SKU MSRP

147167 $68.00

Avid Standard Disc Brake Bleed KitIncludes: 2 standard bleed syringes and fittings; 2 threaded hose barbs; 2 aluminum compression fittings; 2 bleed o-rings; 1 crows foot socket attachment; 1 25/10mm torx wrench; 4 bleed blocks. • DOT 5.1 brake fluid not included.

SKU Spec's MSRP

157004 Fluid not included $38.00

Finish Line DOT Brake FluidHighest quality DOT fluid. Provides maximum fluid life and braking performance. Finish Line’s DOT fluid exceeds the most stringent 5.1 Spec's and is compatible/mixable w/ all DOT 3, 4, 5.1 spec’d systems. Features a super low viscosity to yield superior lever response and pad retraction through a full range of temperatures.

SKU Size MSRP

157667 4 oz $8.99

142750 Crystal Grease

131208 5.1 DOT Brake Fluid

147167 Pro Disc Brake Bleed Kit (DOT 5.1)

157004 Standard Disc Brake Bleed Kit

157667 DOT Brake Fluid

Tools

573800-283-2453

Lubricants & Care Products - Hydraulic Brake Fluid

Finish Line Mineral Oil Brake FluidA high performance Mineral Oil brake fluid. Provides maximum fluid life and braking performance. Features a super low viscosity to yield superior lever response and pad retraction through a full range of temperatures.

SKU Size MSRP

157666 4 oz $8.99

Shimano Disc Brake Mineral OilSKU Size Spec's MSRP

126074 50ml Mineral Oil $20.99

Shimano Disc Brake Mineral OilSKU Size Spec's MSRP

155379 1 Litre Mineral Oil $24.99

Shimano TL-BT03 Disc Brake Bleed Tool KitUniversal disc brake bleed kit compatible w/ open reservoir and funnel bleed disc brake systems includes: syringe, funnel, pedestal, reservoir clamp, overflow bottle and 2 hose clips

SKU MSRP

151174

Shimano TL-BT03-S Simple Disc Brake Bleed Tool KitFunnel/Stopper + syringe form a simple kit for use when bleeding: M988; 985; 820; 785; 675; 666; 640, and 596 model hydraulic disc brakes. Designed for use w/ mineral oil only.

SKU MSRP

159186

TRP Disc Brake Bleed KitIncludes: 50cc TRP mineral oil; syringe; plastic tubing; hose retainer; compression ferrules; brass inserts w/O-ring inlet & outlet valves.

SKU MSRP

158718

157666 Mineral Oil Brake Fluid

126074 Disc Brake Mineral Oil

151174 TL-BT03 Disc Brake Bleed Tool Kit

Tools


Lubricants & Care Products - Lube




Boeshield T-9 LubeDeveloped by Boeing for long-term lubrication. The formulation, based on a unique combination of solvents and waxes, is designed to penetrate metal pores and dissolve minor corrosion, then leave a resilient waxy coating that lasts for many months. *Land ship only.


137135 1 oz Drip $3.99122183 4 oz Drip $9.99122184 4 oz Aerosol $9.99122182 12 oz Aerosol $18.99142334 1 gal. Jug $119.99

DuPont Performance Silicone LubricantLubricates any item: Plastic, metal, rubber, etc. Teflon added and waterproof. Excellent for treadmill decks. *Land ship only


130694 10 oz Aerosol $6.99

Finish Line Bike Care Value Pack4 oz bottles of the essential cleaning and lubricating products from Finish Line. Everything needed to properly clean and lube a bicycle in one box.

SKU MSRP

159092 $16.99

Finish Line Ceramic Wax LubricantFinish Line's Ceramic-WAX is an advanced wax-based lubricant featuring nano-sized platelets of ce-ramic boron nitride and micron particles of fluoropolymer. Every time Ceramic WAX is applied, the ceramic coating is enhanced ultimately providing the durability of many oil-based lubricants. Ceramic WAX ensures total drivetrain cleanliness w/o the distance' or 'build-up' compromises of other wax lubricants.


142742 2 oz Drip $5.99142743 4 oz Drip $9.99

Finish Line Ceramic Wet LubricantCeramic WET is Finish Line’s most advanced and effective racing lubricant. This wet-style full synthetic lubricant is enhanced w/ nano-sized platelets of boron nitride and micron particles of fluoropolymer. As Ceramic WET builds it’s ceramic coating on the frictional surfaces of a drivetrain, cyclists will feel the smoothness and appreciate the added quietness. Ceramic WET is a full water-proof lubricant, so it can be used in all disciplines: Mountain bike; cyclocross, and road racing.


136890 2 oz Drip $5.99136892 4 oz Drip $9.99

122184 T-9 Lube 130694 Performance Silicone Lubricant

159092 Bike Care Value Pack

142743 Ceramic Wax Lubricant

136890 Ceramic Wet Lubricant

Tools

575800-283-2453


Finish Line Teflon Dry LubeDry formula repels grime. Improves shifting. Quiets noisy parts. *Aerosol land ship only.


119512 2 oz Drip $4.99103066 4 oz Drip $7.99119320 8 oz Aerosol $9.99119322 11 oz Aerosol $12.99

Finish Line Wax LubeSelf cleaning ultra dry lube with DuPont Krytox paraffin additive.


121327 2 oz Drip $4.99121328 4 oz Drip $7.99

Finish Line Wet LubeWet style lube for wet or muddy riding conditions. *Aerosol land ship only.


103146 2 oz Drip $4.99119321 4 oz Drip $7.99101108 8 oz Aerosol $9.99

Park CL-1 Synthetic Blend Chain Lube w/ TeflonUsing Teflon & a proprietary blend of oils this works great in wet or dry. Penetrates, reduces friction, prolongs component life, displaces moisture and protects parts from rust & corrosion. 4 oz bottle.

SKU Size MSRP

132892 4 oz $8.29

Pedro’s Chainj Chain LubeMedium-viscosity, vegetable/synthetic lubricant specifically formulated for mixed-to-wet riding condi-tions. Engineered for longer life and superior performance in wet weather. A slight negative charge associates ionically w/ metal surfaces for added life and increase anti-wear properties. Biodegradable.


137455 4 oz Drip $9.00

Pedro’s GO! LubeGo! The most advanced vegetable/synthetic lubricant designed for clean riding conditions. Low-viscosity,engineered to penetrate well into the chain to provide mess-free lubrication and protect metal surfaces from oxidation and wear. Higher lubricity means metal surfaces slide easier, reducing friction and increasing efficiency. Biodegradable.


140581 4 oz Drip $11.00

103066 Teflon Dry Lube 121328 Wax Lube

103146 Wet Lube 132892 CL-1 Synthetic Blend Chain Lube w/ Teflon

137455 Chainj Chain Lube 140581 GO! Lube

Tools



Pedro’s Ice Wax 2.0 Chain LubeNatural wax-based dry lube for dry-to-mixed riding conditions. Advanced chemistry uses a unique detergent base to push contaminants from the chain. Hydrophobic wax coating repels water and provides protection from wear and contaminants. Biodegradable.


142719 4 oz Drip $11.00

Pedro’s Syn LubeFully synthetic lubricant designed to handle the harshest conditions. Formulated w/ extreme pressure additives, corrosion inhibitors, and tackifiers to provide wear protection, lubrication, and staying power in extremely wet and muddy conditions.


143258 4 oz Drip $9.00

Phil Wood BIO LubeBio-Lube is a lighter lubricant than Tenacious Oil that is created using all-natural ingredients. Use as a "fair-weather" or household lube, Bio-Lube penetrates and lubricates contacting metal surfaces, while providing a protective film against corrosion. Bio-Lube is environmentally friendly, nontoxic and completely biodegradable.


142338 4 oz Drip

Phil Wood Tenacious OilTenacious oil is designed to maintain a protective lubricating film between moving parts for less wear and longer life.


117916 4 oz Drip

Progold PG2000 Lubricant Penetrating lubricant has the same characteristics as Pro Link. Unique penetrating and corrosion prevention properties make it an excellent all purpose lube.


130226 12 oz Aerosol $13.50

Progold Prolink Chain LubeUses Metal Friction Reducer (MFR) technology. Prolink is a thin bodied lube that does not build up or become tacky because it does not contain solids such as Teflon, wax, graphite, or plastic. Prolink sheds dirt, repels moisture, and disperses water, so that your bike runs smoother and lasts longer.


130225 4 oz Bottle $8.99156621 8 oz Aerosol $10.50131293 32 oz Bottle $41.50

142719 Ice Wax 2.0 Chain Lube 143258 Syn Lube

142338 BIO Lube 117916 Tenacious Oil

130226 PG2000 Lubricant 130225 Prolink Chain Lube

Tools



Progold Xtreme Chain Lube• Any weather, any terrain • Combines metal friction reducer technology w/ more persistent carriers • Xtreme is a chain lube formula for long-distance and extreme off-road conditions • MFR bonds to metal surfaces and resists build-up and tackiness, in addition to shedding water.


156622 4 oz Bottle $12.00156623 8 oz Aerosol $13.49159316 16 oz Spray Bottle $33.00

Tri Flow Foaming Superior LubricantTri-Flow provides twice the lubricating power of most competitive brands. Its light viscosity allows for deep penetration into hard to reach moving parts. High grade petroleum oils provide optimum lubrica-tion under extreme temperatures (-60 to 475F) and humidity. Foaming formula sticks where you spray it to penetrate deep into the metal.


140391 10 oz Spray $13.79

Tri Flow Superior Dry LubeSuperior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin coating that repels water.


124591 2 oz Drip $5.66

Tri Flow Superior LubricantTri-Flow provides twice the lubricating power of most competitive brands.Its light viscosity allows for deep penetration into hard to reach moving parts. High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity.


102333 2 oz Drip $4.99131110 6 oz Drip $10.89117017 4 oz Aerosol $8.40102949 6 oz Aerosol $11.12102297 12 oz Aerosol $18.61118729 1 gal. Metal Can $121.28

Tri Flow Superior Soy LubeTri-Flow Superior Soy offers an advanced formula combining natural soybean oil and P.T.F.E. This for-mula and packaging were designed and manufactured taking steps to reduce environmental impact.Apply Superior Soy w/ the refillable, hand-pumped spay bottle. This is a simple and low impact way to apply Soy lube w/ no regrets of releasing harmful chemical accelerants into the atmosphere.


145640 2 oz Drip $5.66145641 3.38 oz Spray Bottle $14.69

140391 Foaming Superior Lubricant

124591 Superior Dry Lube

102297 Superior Lubricant

145640 Superior Soy Lube

Tools

579800-283-2453


WD-40 Bike Dry LubeFor dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike. Special polymers form a dry film to protect your chain and repel dirt in arid or dusty conditions. The result is a clean, quiet drivetrain.


158650 4 oz Drip $8.99

WD-40 Bike Multi-Use ProductStill a must for every bike tool chest. Lubricate squeaky shifters, cables, derailleurs and pivot points. Free metal-to-metal seat posts, bottom brackets and bolts. Shed mud from pedals and cleats. Remove adhesive residue and sticky substances. Prevent rust on steel frames and parts. WD-40 Multi-Use Product does it all. Original formula.


158654 4 oz Drip $7.99

WD-40 Bike Wet LubeFor wet and muddy riding conditions. Our exclusive formula has been professionally tested and is amped up for premium lubrication. Improves shifting and extends chain life by repelling moisture and gunk.


158649 4 oz Drip $8.99

White Lightning Clean Ride LubeClean Ride goes on wet, then sets up dry. Patented Self-Cleaning wax film flakes and sheds itself when contaminated w/ dirt and grime to keep parts clean and prevent abrasive wear. Cerflon additive increases durability and requires little to no cleaning before reapplication.


140139 4 oz Bottle $7.99140141 8 oz Bottle $11.99

White Lightning Epic Ride LubeEpic Ride is a light synthetic lube. An excellent "All Conditions" bike lube. Provides long haul durability w/o excessive grime build-up. Works great for cables and derailleurs also. Requires occasional cleaning before re-application.


140140 4 oz Bottle $8.99159428 6 oz Aerosol $9.99142748 8 oz Bottle $14.99

158650 Dry Lube 158654 Multi-Use Product

158649 Wet Lube 140139 Clean Ride Lube

140140 Epic Ride Lube

Tools



White Lightning Wet Ride LubeWet Ride is a heavy bodied synthetic bike lubricant. Perfect for long distances and extreme wet weather conditions. Prevents rusting during stream crossings and salt-air rides. Regular cleanings are recommended to keep grime build up to a minimum.


140146 4 oz Bottle $7.99142749 8 oz Bottle $11.99

Lubricants & Care Products- Suspension Oils & Lubricants



Finish Line MAX Suspension SprayOver time, fork stanchions become dry and dirty, causing the fork to stiffen up, become noisy and lose travel. MAX smoothes, quiets, and improves the performance of old and new forks - even those w/ coated stanchions. Use MAX before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. Use MAX to break in new forks or bring old ones back to life.

SKU Size Spec's MSRP

157665 12 oz Aerosol $9.99

Finish Line New Formula Shock OilSemi-Synthetic Formulation that combines the best of all available oils and additives to result in a super high performance shock oil. Compatible with all suspensions systems and component parts. Will not thicken or thin with temperature variations.

SKU Size Weight MSRP

132934 16 oz 5 wt $18.99132935 16 oz 10 wt $18.99132933 16 oz 15 wt $18.99

Rockshox Suspension OilSKU Size Weight MSRP

139128 1 L 2.5 wt $16.00132567 1 L 5 wt $20.00132568 1 L 10 wt132569 1 L 15 wt

140146 Wet Ride Lube

132933 New Formula Shock Oil

139128 Suspension Oil

Tools

581800-283-2453

Lubricants & Care Products - Wash & Polish




Finish Line Bike WashQuickly cleans dirt, clay, road grime and chain soils off of your bike w/o scrubbing. Long Reach Sprayer is no longer included w/ gallon size, this item is now available separately.


124040 1 L Spray Bottle $12.99136648 1 gal. Container $19.99

Finish Line Showroom Polish and ProtectantProfessional bicycle detailer, protects and polishes all of your components.


119316 11 oz Aerosol $7.99

Pedro’s Bike Lust Bike Polish Silicone polish can be used on bike frames and key parts to protect against UV rays, add shine and buff out scratches. Includes a biodegradable cleaner to remove light amounts of grime from frames. Repeated usage builds a protective surface that makes future cleaning easier. Can even be used on tires to help shed mud.


148620 16 oz Spray Pump

Pedro’s Green Fizz Foaming Bike WashFoaming bike wash uses surfactants to lift dirt and grime from the whole bike. The solvent-free formula can be safely used on all parts and materials –- including carbon fiber -- w/o washing away grease and lubricants or damaging delicate parts. Can be used straight from the bottle for quick cleaning or dilute w/ water and use w/ a brush for tougher jobs.


137456 16 oz Spray Bottle $10.00143261 1 L Spray Bottle $16.00

Progold Bike ShineProGold Bike Shine restores bicycles to that like-new shine. Bike Shine also protects against the sun's rays that can dull and fade a bike's finish over time. Safe for all surfaces, Bike Shine leaves a residual coating that aids in repelling water, dust and dirt.


159317 16 oz Spray Bottle $14.99

124040 Bike Wash

119316 Showroom Polish and Protectant

148620 Bike Lust Bike Polish

137456 Green Fizz Foaming Bike Wash

Tools



Progold Bike Wash• Cleans all types of frames, spokes, and components • Contains no lye, phosphates, bleach, dyes, brighteners, or perfume • In addition to safely cleaning carbon frames and bike parts, Bike Wash can be used on washable fabrics and finishes.


156628 16 oz Bottle $9.00

Progold Blast-Off DegreaserBlast-Off quickly cleans precision bicycle parts w/ no scrubbing. Immediately strips away sticky grime and removes caked on debris w/ ease. Blast-Off dries quickly w/o need for rinsing. Leaves behind no oily residue. Blast-Off's unique sprayer deep-cleans and flushes dirt, grime, and grease away, restor-ing cogsets, derailleurs, and chains to like-new condition. Contains a corrosion inhibitor to prevent flash rusting.


159321 20 oz Aerosol $11.49

Progold Chain ShineDerived from natural ingredients, ProGold's Chain Shine provides quick and powerful grease and grime cutting action. The unique formula deep-cleans and flushes dirt, grime, and grease away for heavy-duty cleaning.


159318 22 oz Bottle $13.49

Progold Degreaser + Wash• Cleans grime, oil, and greases gently • Safe on all surfaces • Concentrated degreaser and wash.


156629 16 oz Bottle $12.00

Progold Foaming Citrus DegreaserWater based foaming degreaser w/ high solvency, fast acting, and clinging properties Degreases chains and other lubricated parts quickly and effectively. Supplied w/ an extension tube to reduce over spray and provide for pinpoint application.


159320 20 oz Aerosol $14.99

Progold Helmet Cleaner and DeodorizerFoaming action safely removes the root cause of foul odors w/in helmet liner and padding. The foaming action also safely and easily loosens and removes dirt, grime, and bugs from helmet exterior.


159319 8 oz Aerosol $9.99

Progold Steel Frame Protector• Internal rust protection for all steel frames: Paint protects the outside of the frame • Use Steel Frame Protector w/ its rust-inhibitive coating to protect the inside • This 6 oz can will treat several frames.


156630 6 oz Aerosol $12.49

156628 Bike Wash

156630 Steel Frame Protector

Tools

583800-283-2453

POP Displays

WD-40 Bike Foaming Bike WashDirt-eating suds remove the most stubborn grime from your bike, leaving it sparkling clean. Biodegrad-able and safe for carbon fiber, titanium, aluminum, steel, chrome, rubber or plastic.


158651 1 L Spray $13.99159595 1 Gallon Bottle $36.99

WD-40 Bike Frame ProtectantSpecially formulated to prevent the build-up of dirt, dust and grime. Helps treated surfaces stay cleaner longer. Restores scratched areas and the luster of clear coats, carbon or other finishes.


158653 8 oz Bottle $14.49

White Lightning Wash & ShineWash & Shine makes cleaning your bike easy. Simply spray onto the entire bike. Wash & Shine Quickly loosens, lifts and removes dirt, grime, mud and more from the bike. Rinse or wipe off, leaves a nice shine when dry. Safe for all materials.


140147 32 oz Spray Bottle $9.99

P.O.P. Displays

Chamois Butt’r Gravity Feed P.O.P. DisplayEach POP display has 75 - 9ml individual use packets. Custom graphics w/ suggested MSRP on back panel and a location for the shop to put their selling price on the front panel. Recycleable Cardboard box. Front panel is perforated so it opens into a tray for ease of displaying and dispensing product.

SKU Model Size Qty MSRP

159462 Eurostyle 9ml Packet 75159461 HER 9ml Packet 75

Finish Line Care Center Display** Drop ship only

SKU MSRP

156990

158651 Foaming Bike Wash

158653 Frame Protectant

140147 Wash & Shine

159462 Gravity Feed P.O.P. Display

Tools


POP Displays

Finish Line Counter Top Display*Made from corrugated plastic w/an open design this Counter Top display features: 12-4 oz bottles of Dry Lube; 12-4 oz bottles of Wet Lube; 4-6 oz bottles of 1-step; 6-17 oz bottles of Speed Clean; 6 Starter Kits and 6 packs of Gear Floss. Free freight from Finish Line. Contact your rep for full details.* Drop ship only

SKU MSRP

156988

Finish Line Display Tray 2 oz / 4 ozFree Impulse Tray when you order any 24 unit combination of 2oz / 4oz lubes! Holds 18 bottles of 2oz or 4oz assorted bottles. All trays interlock. Each tray just 9" x 10.

SKU Spec's MSRP

138047 Counter Top

Finish Line Display Tray 8 oz / 12 ozFree Impulse Tray when you order any 24 unit combination of 8oz / 12oz lubes! Holds 12 assorted 8oz or 12oz bottles. All trays interlock. Each Tray just 9" x 10.

SKU Spec's MSRP

138863 Counter Top

Finish Line Gravity Feed Display*For use as a counter top, or wall hung display. Holds 18-4 oz bottles of lube. Order includes 36-4 oz bottles of Teflon DRY lube and 50 Maintenance guides. Free freight from Finish Line. Contact your rep for full details.* Drop ship only

SKU MSRP

156987

Finish Line Wall Mount Display** Drop ship only

SKU MSRP

156989

Lizard Skins DSP Handle Bar Tape Display• Display comes w/ handlebar w/ DSP tape installed so customers can feel the plushness before they buy! • Buy 25 rolls of Lizard Skins DSP tape and display is free.

SKU MSRP

153907

156988 Counter Top Display

138047 Display Tray 2 oz / 4 oz

138863 Display Tray 8 oz / 12 oz

153907 DSP Handle Bar Tape Display

Tools

585800-283-2453

POP Displays

Park PDR-4 Tool Display*The PDR-4 includes a specially priced mix of fast selling tools, a copy of our newly updated Home Mechanic Tool Selection Guide, new graphics, and a versatile display that can easily be rolled from one location in the store to another. It all adds up to create a well-defined tool and information center that sends a shop’s customers the message that they’ve come to the right place for their bicycle tool needs. * Drop shipped directly to the dealer from Park Tool.

SKU Model MSRP

155344 BBB-3

Park PDR-4RK Tool Display Refill Kit*Refill Kit for the Park PDR-4 Display Rack. Includes Tools Only. * Drop shipped directly to the dealer from Park Tool.

SKU MSRP

157152

Park PDR-5 Tool Mini Wall Display*The PDR-5 is a great way to get to get tool orffereings organized in a compact space. * Drop shipped directly to the dealer from Park Tool.

SKU MSRP

157153

Park PDR-6 Wall Mount Display*The PDR-6 will help showcase a selection of tools on two display panels. Each panel can be mounted to nearly any wall, and in any configuration. * Drop shipped directly to the dealer from Park Tool.

SKU MSRP

157154

SBS Clip-On Sign HolderUniversal knuckle allows the sign holder to tilt in any direction. Clip is lined with anti-slip coating. Clip clamps around materials up to 1-1/8" thick. Displays material from. 008" to .020" thick. 4" overall length.

SKU Model No. Spec's Color MSRP

133605 4008 10/Bag Clear Plastic

Trik Topz Valve Cap DisplayFree with the purchase of 60 pairs of Trik Topz valve caps! The fifteen hooks hold up to 10 pairs each. Note: This is the rack and header card only. Product sold separately.

SKU Spec's MSRP

126652 Counter or Wall Mount

155344 PDR-4 Tool Display

157152 PDR-4RK Tool Display Refill Kit

133605 Clip-On Sign Holder

126652 Valve Cap Display

Tools


POP Displays

White Lightning Counter/Slatwall Display*White Lightning’s Counter/Slatwall display makes it easy for customers to pick up a bottle of lube, put it near your register. This display contains: 12-4 oz bottles of Clean Ride; 12-4 oz bottles of Epic Ride; 12-4 oz bottles of Wet Ride and 12-12 oz Aerosol cans of Clean Streak. Free freight from White Lightning. Contact your rep for full details.* Drop ship only

SKU MSRP

156991

White Lightning Floor Display** Drop ship only

SKU MSRP

156992

XLC Full Free-Standing Display w/ Hooks1 meter tall. 30 hooks included. Merchandise not included.

SKU Color MSRP

146517 Silver

Racks, Bike Display

Delta Boticelli Free Standing 4 Bike RackFully adjustable arms fit any bike with a silver powder coated finish. Maximum load of 120lbs. Easy to assemble and tools are included.

SKU Size Color MSRP

137355 4-Bike Gray $149.99

Delta El Greco Pulley Bike Storage SystemRaise and store a bike up and out of the way, Easily holds a bicycle, kayak, ladder, etc., Efficient pulley system helps you lift and lower heavier objects. Engineered for long durable performance; finished in tough silver powdercoat, Includes mounting hardware and full instructionsMaximum load 50lbs

SKU Model No. Color MSRP

138244 RS2100 Silver $34.99

Delta Leonardo Wall Mount Storage Rack• Single Bike Storage• Elegant space-saving design• Looks good in any room• Tough silver powdercoat finish• Rubberized coating protects wheel rim

SKU Size Color MSRP

129742 1-Bike Gray $14.99

156991 Counter/ Slatwall Display

146517 Full Free-Standing Display w/ Hooks

137355 Boticelli Free Standing 4 Bike Rack

138244 El Greco Pulley Bike Storage System

129742 Leonardo Wall Mount Storage Rack

Tools

587800-283-2453

Racks, Bike Display

Delta Michelangelo 2-Bike Wall RackNo drilling required. Lean type. Fully adjustable arms fit any bike. Max. weight: 2-50lb bikes.

SKU Size Color MSRP

131291 2-Bike Gray $79.99

Delta Rothko Rolling Bike StandRolling bike stand. Powder coat finish. Fits all tires.

SKU Size Color MSRP

130697 1-Bike Gray $34.99

Delta Seuret 2 Bike Floor StandFits two bikes facing opposite directions. Powder coat finish. Fits all tires.

SKU Size Color MSRP

135245 2-Bike Gray $39.99

Park ES-1 Event StandThe ES-1 is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. Includes two height adjustable tripod uprights, two 47" (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length w/ the use of ES-2 Event Stand Add on Kit.

SKU MSRP

157662 $359.95

Park ES-2 Event Stand Add-On KitThe ES-2 extends the length of the ES-1 Event Stand by eight feet. Includes one height adjustable tripod upright, two 47" (119cm) support tubes, and one connector sleeve.

SKU MSRP

157663 $239.95

Saris Wheel Arch #6012SKU MSRP

129387 $26.99

Topeak Flash StandThe ultimate portable tune up stand. Light weight and foldable. Supports bike from BB. 500 grams.

SKU MSRP

133562 $44.95

131291 Michelangelo 2-Bike Wall Rack

130697 Rothko Rolling Bike Stand

135245 Seuret 2 Bike Floor Stand

129387 Wheel Arch #6012

133562 Flash Stand

Tools


Racks, Bike Display

Topeak Flash Stand SlimFor the enthusiast who wants to stand or display their prized road bike. Constructed of aluminum and engineering-grade polymer, the Flash Stand Slim slips over any non-drive side Shimano Hollow Tech-II road crank arm.

SKU Color MSRP

139737 Silver $44.95

Topeak Line Up StandSKU Color MSRP

158942 Black $64.95

Topeak One Up Bike HolderElegant high polished aluminum wall rack w/ aluminum side hanger for bike storage; Rubber padded hook for wheel protection against scratching; Two side hangers make hanging jerseys, helmets, and other goodies neat and convenient; Integrated side hanger knobs for quick and easy adjustments ; Grooved wheel rests to keep your bike aligned on the wall; Easy to install w/ all mounting hardware; Maximum load: 35 pounds

SKU Size MSRP

137203 1-Bike $49.95

Topeak Dual-Touch Bike Stand6061 aluminum vertical tube with 2 bike mounts. Adjustable height to 10' 7/8". Black finished tube.

SKU Size MSRP

131188 2-Bike $199.95

Topeak Two-Up Tune Up Bike StandMulti-Bike, Free Standing storage system that is solid enough to serve as a light duty work stand. Constructed of aluminum tubing, the center pillar extends to almost seven feet high. The tripod base provides wide, stable support. 2 bike mounts included. Base: 17.3" x 13.4", 84.3" max height.

SKU Size MSRP

150452 2-Bike $249.95

Topeak TwoUp TuneUp 3rd HookAdditional upper and lower hooks for the TwoUp TuneUp bike stand.

SKU Model MSRP

158916 Lower $49.95158915 Upper $49.95

XLC Axle Mount Single Bike Display• Supports bicycle by the front or rear axle (preferred)

SKU MSRP

152113 $36.00

XLC Wheel Mount Single Bike Display• Supports bicycle by front or rear wheel • Steel w/ rubber feet.

SKU MSRP

152112 $36.00

139737 Flash Stand Slim 137203 One Up Bike Holder

131188 Dual-Touch Bike Stand

150452 Two-Up Tune Up Bike Stand

152113 Axle Mount Single Bike Display

152112 Wheel Mount Single Bike Display

Tools

589800-283-2453

Repair Stands - Stands

Racks, Parking

Shipping restrictions may apply. Ask your SBS rep for details.

Hollywood Bike Valet Parking StandDouble sided, indoor or outdoor use.

SKU # of Bikes Spec's MSRP

121464 6-Bike Double Sided $114.99

Saris Mighty Mite Parking Stand6210. Lightweight & durable for use indoors and out.

SKU Model # of Bikes Spec's MSRP

156890 Mini 4-Bike Double Sided $69.99109384 Standard 6-Bike Double Sided $119.99


Park PB-1 Portable WorkbenchFolds for easy transportation and storage.36" x 23" work surfaceSpecially sized slots and holes for storage.

SKU Model No. MSRP

136871 PB-1 $149.95

Park PCS-10 Home Mechanic Repair StandCam-type clamp allows single action clamping of tubes 7/8" to 3" (24mm to 76mm). Clamping pressure is fully adjustable and jaw covers are replaceable.Composite top tube for smooth 360-degree clamp rotation. Quick release height adjustment (39" to 57", 99cm to 145cm). Folds to 41".

SKU Model No. MSRP

134506 PCS-10 $198.95

Park PCS-12 Home Mechanic Bench Mount Repair StandBench version of PCS-10. Cam-type clamp allows clamping of tubes 7/8" to 3". Clamping pressure is fully adjustable and jaw covers are replaceable (part #1185K). Composite top tube for smooth 360-degree clamp rotation. Quick release height adjustment (39" to 57", 99cm to 145cm). Folds to 41" for portability and storage. Three-point leg system w/ reinforced center yolk for superior stability.

SKU MSRP

136880 $118.95

121464 Bike Valet Parking Stand

109384 Mighty Mite Parking Stand

136871 PB-1 Portable Workbench

134506 PCS-10 Home Mechanic Repair Stand

136880 PCS-12 Home Mechanic Bench Mount Repair Stand

Tools



Park PCS-4.2 Deluxe Home Repair StandIncludes 100-5D Professional Micro Adjust Clamp. Folds flat for storage. Steel, powder coated tubing. Composite top tube assembly. Base has four points of contact w/ ground for stability. Ideal for light duty shop use or home use.

SKU Model No MSRP

145130 PCS-4.2 $299.95

Park PCS-9 Home Mechanic Repair StandThree-point leg system creates stable base. Height adjusts from 39"to 57"(99cm to 145cm). Screw type clamp adjusts to fit tubes of various shapes from 7/8" to 3". Screw type clamp adjusts to fit tubes from 7/8" to 3" (24mm to 76mm). Clamp rotates 360 degrees for easy access to any part of bike. Will also clamp on aero shaped seat posts. Legs fold upward for easy storage. Loosen the lower bolt on the primary tube, and lift legs upward.

SKU Model No. MSRP

130949 PCS-9 $149.95

Park PRS-2 OS-2 Double Arm Repair StandClamping height adjusts from 50" to 62" (127-158cm). Clamps rotate 360 degrees so bike can be posi-tioned at any angle. Stand rotates 360 degrees. Includes two 100-3D Professional Micro Adjust Clamps. Base not included. Use Sku 153036 for base.

SKU MSRP

153067

Park PRS-20 Team Race StandMounts hold bike securely by the front or rear dropouts. Quick release retention strap stabilize bottom bracket. 360 degree horizontal rotation. Folds to 33". Built in “sleeping hub” allows easy chain cleaning w/ rear wheel removed. Bottom bracket height quickly adjusts from 28" to 38".

SKU Model No. MSRP

132889 PRS-20 $238.95

Park PRS-25 Team Issue Repair Stand100-25D Prof. Micro Adjust Clamp quickly clamps and releases nearly any tube from 7/8" to 3" (23-76mm), including aero tubes. Fully adjustable clamping pressure. Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts. 360º clamp rotation. Quickly and easily folds to 47". Clamping height adjusts up to 60". Proprietary Hexatude hex-shaped aluminum tubing ensures low flex and no rotation. Weighs just 13 pounds (6 kg).

SKU Model No. MSRP

145089 PRS-25 $339.95

Park PRS-3 OS-1 Single Arm Repair StandShop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) in diameter and rotates 360 degrees for easy access to any part of the bike. Clamp height is adjustable from 50 to 62" (127-158cm). Stand bolts to floor using the Floor Plate FP-2, or to the 68 lb #130 base (sold separately, SBS SKU 153035). Includes #105 Aluminum tool tray. Uses the 468B jaw covers. * Note: The maximum weight holding capacity of the PRS-3 OS-1 is 150lb (68kg).

SKU Model No. MSRP

158922 PRS-3 OS-1 $369.95

145130 PCS-4.2 Deluxe Home Repair Stand

130949 PCS-9 Home Mechanic Repair Stand

153067 PRS-2 OS-2 Double Arm Repair Stand

132889 PRS-20 Team Race Stand

145089 PRS-25 Team Issue Repair Stand

Tools

591800-283-2453


Park PRS-3 OS-2 Single Arm Repair StandClamping height adjusts from 50" to 62" (127-158cm). Clamp rotates 360 degrees so bike can be positioned at any angle. Heavy gauge steel tubing, chrome-plated for durability. Stand can be bolted to the #130 base. Sku for base is 153035.

SKU MSRP

153066

Park PRS-33 AOK*The PRS-33 AOK (add-on kit) turns the PRS-33 single arm stand into a double arm stand. Complete w/ clamp, sliding carriage, work tray, electric motor, power source, chain and hardware.* Drop ship only

SKU MSRP

157908 $1175.95

Park PRS-33 Power Lift Shop Repair Stand*The biggest, strongest, stiffest, most versatile repair stand we’ve ever built. Designed w/ professional mechanics in mind, the PRS-33 combines a massive upright, versatile clamping system and smooth operating electric motor to create a super rigid workstation that offers effortless height adjustment for any bike up to 120 lbs. (54 kg). Perfect for lifting heavy electric, tandem, and downhill bikes off the ground, but also great for easy height changes during any repair or assembly. * Drop ship only

SKU Model No. MSRP

155820 PRS-33 $1839.95

Park PRS-4 OS-2 Deluxe Bench Mount Work Stand100-3D Professional Micro Adjust Clamp rotates 360 degrees so bike can be positioned at any angle. Heavy gauge steel tubing, chrome-plated for durability.

SKU Model No. MSRP

145128 PRS-2 OS-2 $269.95

Park PRS-4W-2 Single Arm Wall Mount Stand100-5D Professional Micro Adjust Clamp rotates 360 degrees so bike can be positioned at any angle. Heavy gauge steel tubing, powder coated for durability. Mounts to post or wall stud (bolts not included).

SKU Model No. MSRP

158308 PRS-4W-1 $212.95145129 PRS-4W-2 $212.95

Park TS-2.2 Professional Wheel Truing StandAccepts wheels up to 29" w/ or w/o tire. Calipers accept rim widths up to 4". Accepts hub widths up to 175mm. Removable/replaceable composite caliper tips protect painted rims. Stronger, more comfort-able knob. Uprights move simultaneously to accommodate front and rear wheels. Spring-loaded calipers and caliper arm prevent binding. Nickel chrome plated heavy gauge steel. Smooth, accurate operation. Can be bench mounted or installed in a bench vice.

SKU Model No. MSRP

145086 TS-2.2 $259.95

153066 PRS-3 OS-2 Single Arm Repair Stand

155820 PRS-33 Power Lift Shop Repair Stand

145128 PRS-4 OS-2 Deluxe Bench Mount Work Stand

145129 PRS-4W-2 Single Arm Wall Mount Stand

145086 TS-2.2 Professional Wheel Truing Stand

Tools



Park TS-8 Home Mechanic Wheel Truing StandAccepts 16" -29" wheel w/ or w/out tire. Sliding dropout allows for quick installation. Accepts hub width up to 170mm. Dishing performed by flipping the wheel. Replaces TS-7

SKU Model No. MSRP

132891 TS-8 $109.95

Topeak PrepStand Pro Repair StandStable tripod base w/ quick release clamp folds compactly into included bag for storage and travel. Constructed from high strength oversized 6061 T6 tubing. Clamp head rotates 360' and features soft, non-marring rubber jaws. Built-in digital weight scale for accurately weighing small parts, or a complete bicycle.Height adjustable from 48" - 72"Clamp opens from 0.75" - 1.8"Max Weight Capacity: 55lbs

SKU MSRP

147078 $329.95

XLC Folding Repair StandConstructed of sturdy alloy material. Head rotates 360 degrees. Height adjusts quickly

SKU Color MSRP

145808 Silver / Black $174.00

Repair Stands - Parts

Park 100-3C Clamp DeluxeAdjustable linkage clamp for PRS-2, PRS-3 and PRS-4.

SKU Model No MSRP

120190 100-3C

Park 100-3D Pro Micro Adjust ClampFits: PRS-2, PRS-3, PRS-4, PRS-2 OS, PRS-3 OS, PRS-4 OS, and PRS-4W. Cam-actuated adjustment system for quick entry, adjustment and exit. Grips nearly any tube from 7/8" to 3" (23-76mm), including aero tubes. Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts.

SKU Model No. MSRP

145424 100-3D

Park 100-7X Extreme Range Clamp• Our most versatile clamp, the 100-7X fits all PRS-2, 3 and 4 repair stands (including OS models) and works on nearly any bike, no matter the size and shape of the frame tube • Clamps round, square, rectangular and aeroshaped tubes from 7/8" to 4" (23mm to 102mm)

SKU Model No. MSRP

150903 100-7x

132891 TS-8 Home Mechanic Wheel Truing Stand

147078 PrepStand Pro Repair Stand

145808 Folding Repair Stand 120190 100-3C Clamp Deluxe

145424 100-3D Pro Micro Adjust Clamp

150903 100-7X Extreme Range Clamp

Tools

593800-283-2453


Park 104 Plastic Tool TrayLots of slots and holes to keep your tools close by. Fits all park stands except PRS-205 and PRS-305.

SKU Model No. MSRP

113860 104 $17.95

Park 105 Tool Tray, AluminumMade from cast aluminum. Oversized.

SKU Model No. MSRP

124281 105 $68.95

Park 106 Work TrayThe #106 installs easily utilizing our exclusive receiver pod accessory system found on PRS-15, PCS-10 and PCS-11 Repair Stands. Also fits PCS-1, PCS-4 and PCS-9 Repair Stands when used w/ part #106-AC Accessory Collar (available separately).

SKU Model No. MSRP

142539 106 $33.95

Park 106-AC Accessory Collar for 106 TrayAllows #106 Work tray to work w/ PCS-1, PCS-4 and PCS-9.

SKU Model No. MSRP

142541 106-AC $14.95

Park 122S Linkage AssemblyFor PRS-2, 3 & 4.

SKU Model No. MSRP

118878 122S

Park 1259 Cover for 100/4X/6X/15XFor use w/ 100/4X/6X/15X clamps.

SKU MSRP

148697

Park 135-33 Base Plate*115 pound base plate for repair stand PRS-33*Drop ship only

SKU Model No. MSRP

155821 135-33 $319.95

Park 466 Clamp CoverOld style cover fits original clamps w/ plastic dipped jaws. Old plastic should be removed before installing new covers.

SKU Model No. MSRP

109879 466

113860 104 Plastic Tool Tray 124281 105 Tool Tray, Aluminum

142539 106 Work Tray 142541 106-AC Accessory Collar for 106 Tray

118878 122S Linkage Assembly 148697 1259 Cover for 100/4X/6X/15X

155821 135-33 Base Plate 109879 466 Clamp Cover

Tools



Park 467B Clamp Cover w/ Single Cable ReliefFits PRS-2 through PRS-8 with single cable relief in jaw. Simply discard old covers and install new covers; each set includes two circlips.

SKU Model No. MSRP

134540 467B

Park 467G Clamp CoverFits PCS -1 & PCS-2. One cover with cable groove and one without.

SKU Model No. MSRP

116993 467G

Park 468B Clamp CoverFits PCS-2 through PCS-8. For cast clamp, single cable groove on each cover.

SKU Model No. MSRP

124372 468B

Park 468G Clamp CoverFits PCS-1 & PCS-2. For cast clamp, double cable grooves.

SKU Model No. MSRP

101503 468G

Park Base #130For use w/ stands PRS-3 OS-1, OS-2, OSXLB, and PRS-23.

SKU MSRP

153035 $199.95

Park Base #135For use w/ stands PRS-2 OS-1, OS-2, and OSXLB.

SKU MSRP

153036 $349.94

Park HBH-2 Handlebar HolderUpdated to fit handlebars w/ a diameter of up to 32MM and OS top tube up to 50mm.

SKU Model No. MSRP

136881 HBH-2 $19.29

Park PRS-CRK Repair Kit For 100-3C ClampSKU Model No. MSRP

125845 PRS-CRK $34.95

134540 467B Clamp Cover w/ Single Cable Relief

116993 467G Clamp Cover

124372 468B Clamp Cover 101503 468G Clamp Cover

153035 Base #130 153036 Base #135

136881 HBH-2 Handlebar Holder

125845 PRS-CRK Repair Kit For 100-3C Clamp

Tools

595800-283-2453

Repair Tags

Park TS-2 EXT.2 Truing Stand Upright ExtensionInstalls on Park TS-2 or TS-2.2 Wheel Truing Stand. Allows TS-2 to fit wheels w/ QR and solid axles hubs up to 215mm wide ot the TS2.2 to fit hubs up to 230mm wide. Allows both stands to fit 29" wheels w/ tires installed. Specially sized adapter bosses allow TS-2 to fit thru axle hubs up to 135mm wide and TS2.2 to fit thru axle hubs up to 155mm wide. Can be used w/ TS-TA or TS-2TA Thru Axle Adpaters (sold separately) to fit wide thru axle hubs (170mm w/ TS-2, 190mm w/ TS2.2).

SKU Model No. MSRP

159300 TS-2 EXT.2

Park TS-25 Repair Stand Mounted Wheel Truing StandSecurely holds any wheel using a quick release or threaded axle and adjusts for any wheel diameter and rim width. Installs and removes quickly and easily. Fits PRS-25 and PCS-10 Repair Stands. Will also fit the PCS-1 and PCS-4 Repair Stands when used w/ the adjustable height extension.

SKU Model No. MSRP

149323 TS-25 $34.95

Park TSB-2 Tilting Truing Stand BaseAllows you to tilt your truing stand for a more comfortable position. For use with TS-2.

SKU Model No MSRP

119110 TSB-2 $35.95

Repair Tags

Wald Repair Tags 500/BoxSKU Spec's MSRP

102092 Hanging $37.50

Walking Bird Bicycle Hang TagIncluding string, serves as a price tag. Bike I.D. and a basic Quality Control/ Assembly Checklist. Also has a place to stamp stores name.


132710 2-1/2" x 4-1/4" #BHT-NI-250

Walking Bird Big Bicycle Repair FormServices (132707) or No services listed (132704) for multi purpose use. Estimate column can be used to quote custom products, estimates and parts sales. Mechanics comments/recommendations, warning/diagnosis. Time clock compatible for timed repairs on back page. (Available w/ dealer’s imprint by drop ship.


132707 8" x 11" #RP811-NI-250

149323 TS-25 Repair Stand Mounted Wheel Truing Stand

119110 TSB-2 Tilting Truing Stand Base

102092 Repair Tags 500/Box

132710 Bicycle Hang Tag

132704 Big Bicycle Repair Form

Tools


Repair Tags

Walking Bird Buyer’s AgreementPrepunched for easy lookup in binder. Consumer safety checklist included. (Available w/ dealer’s imprint by drop ship).

SKU Spec's MSRP

132712 #CC811-NI-100

Walking Bird Compact Inventory Tag w/ Store Imprint*• 1000 Inventory tags w/ you store logo • Please contact your rep to order this item. * Drop ship only

SKU Model No. MSRP

155058 INVY1000

Walking Bird Compact Inventory/Sales FormDate promised box. Self-adhesive backing for box and bike I.D. 4-part carbonless (assembly copy, customer invoice, control, hard copy). Separate box for assembler and test rider. (Available w/ dealer’s imprint by drop ship).


132708 4-1/4" x 11" #INVY-NI-250

Walking Bird Compact Repair TagNo services listed for multi purpose use. Liability disclaimer built in. Carbon customer claim stub filled out as you fill out store copy. Vital information on right edge for viewing in file. (Available w/ dealer’s imprint by drop ship).


132703 4-1/4" x 9" #RNP-NI-250132705 4-1/4" x 9" #RP-NI-250

Walking Bird Layaway / Special Order TagHeavy yellow card stock. Perfect to flag inventory and repair tags as laid away or waiting for parts. Price breakdown, accessories, parts and labor are easily identified. (Available w/ dealer’s imprint by drop ship).


132709 4-1/4" x 10-1/4" #LASO-NI-250

Walking Bird Repair Tag w/ Store ImprintPlease call your inside rep for more info. These are custom ordered. Quantity of 1000 tags. Dropship only

SKU Model No. MSRP

155029 RP2

132712 Buyer’s Agreement

132708 Compact Inventory/Sales Form

132703 Compact Repair Tag

132709 Layaway / Special Order Tag

Tools

597800-283-2453

Shop Stools

Scales

Park DC-1 Digital Caliper• Displays metric, decimal standard, and fractional standard to 1/128"• Large LCD display• Measures external, internal, depth and stepped dimensions• Resolution: +/- 0.01mm/0.0005"/1/128"• Accuracy: +/- 0.02mm/0.001 (-100mm)• Repeatability: +/- 0.01mm/0.0005"• Protective case and battery included

SKU Model No. MSRP

142544 DC-1 $57.95

Park DS-1 Digital ScaleAccurately weigh bikes, frames or components. Clamps to repair stand, or can be hung from a hook. Measures in pounds and kilograms to the tenth. Includes a dual position, silicone hanging hook. 55 lb weight limit.

SKU Model No. MSRP

140304 DS-1 $66.95

Park DS-2 Tabletop Digital Scale• Accurate to w/in 2g/ 1000g, 2g/ 2000g, 3g/ 3000g• Tare feature to exclude weight of container• Switches easily between grams and ounces• 3000 gram (106 oz) capacity• Battery included

SKU Model No. MSRP

142519 DS-2 $33.95

Shop Stools

Park STL-1.2 Shop StoolSTL-1.2 shop stool has chrome-plated steel legs and a comfortable padded seat w/ the Park tool logo. Seat swivels 360 degrees and is positioned at a height of 32 inches. Intended for the shop, looks great on the Sales floor. Will accept the STL-3K back rest

SKU Model No. MSRP

147257 STL-1.2 $109.95

Park STL-2 Shop StoolQuickly maneuver around bike while making adjustments. Adjustable shock (5 inches of travel) 5 nylon wheels, steel legs, swivel seat w/ park tool logo. Height adjusts from 17 1/2 to 22 1/2 inches. Rolls on wheels.

SKU Model No. MSRP

130955 STL-2 $109.95

142544 DC-1 Digital Caliper

140304 DS-1 Digital Scale

142519 DS-2 Tabletop Digital Scale

147257 STL-1.2 Shop Stool

130955 STL-2 Shop Stool

Tools


Shop Stools

Park STL-3K Back Rest KItThe STL-3K is kit that will add a back rest to the STL-1.2 work stool. The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STl-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K

SKU MSRP

148703 $47.95

Storage Hooks

XLC Single Bike Wall Hanger Storage SystemSKU Color MSRP

154091 Black $30.00

XLC Storage Chains Bike Storage SystemSKU MSRP

154090 $22.00

XLC Storage HooksHang your bikes w/ these solid hooks.


154135 2 Hooks Machine Thread $7.00143972 2 Hooks Wood Screw $7.00

Tools - Aprons & Gloves

Park Nitrile Mechanics GlovesProtects hands from chemicals and grime. Thin but very durable, w/ fingertip texture for maximum grip. Thicker than the original.

SKU Model No. Size Spec's MSRP

151528 MG-2M Medium 100/Box $22.95151527 MG-2L Large 100/Box $22.95151526 MG-2X X-Large 100/Box $22.95

Park Mechanic’s GlovesGreat for riding or mechanical work, the Park Tool Mechanic’s Glove is the perfect combination of comfort and function. Digital Amara palm w/ external reinforcement patches. Touch phone compatible thumb and index fingertips. Soft fleece brow wipe. Durable two-way scratch knit glove back w/knuckles gussets. TPR adjustable closure tab.

SKU Model No. Size Color MSRP

159301 GLV-1S Small Blue159302 GLV-1M Medium Blue159303 GLV-1L Large Blue159304 GLV-1X X-Large Blue

148703 STL-3K Back Rest KIt

154091 Single Bike Wall Hanger Storage System

154090 Storage Chains Bike Storage System

154135 Storage Hooks

151528 Nitrile Mechanics Gloves

Tools

599800-283-2453

Tools - Bottom Bracket Tools

Park SA-3 Deluxe Shop ApronFull length. Large pockets. Cotton.

SKU Model No. MSRP

124373 SA-3 $25.49

Redline 2013 Apron100% heavy-duty cotton. Extra long and wide, w/ an adjustable neck strap and two pockets. Embroidered w/ the RL USA logo.

SKU Color MSRP

153822 Black $25.99

Tools - Axle Vises

Park AV-1C Axle ViseUse to clamp axles without damaging threads.

SKU Model No MSRP

109880 AV-1

Park AV-4 Heavy Duty Axle & Pedal ViseWorks on 5/16" to 9/16" for easy wheel hub & pedal adjustments. AV-4's bridge springs keep the jaws aligned and allow the tool to automatically open when the bench vise is opened.

SKU Model No. MSRP

132894 AV-4

Park AV-5 Heavy Duty Axle & Pedal ViseWorks on 5/16" to 9/16" for easy wheel hub & pedal adjustments. AV-4's bridge springs keep the jaws aligned and allow the tool to automatically open when the bench vise is opened.

SKU Model No. MSRP

157311 AV-5 $34.95


FSA Isis Bottom Bracket Installation ToolSKU Spec's MSRP

127252 W/ 1/4" Drive / 8mm Adaptor $29.99

FSA MegaEvo BB Installation ToolSKU Model No. MSRP

158856 Socket E0410 $59.99158855 Spanner E0373 $24.99

124373 SA-3 Deluxe Shop Apron

109880 AV-1C Axle Vise

132894 AV-4 Heavy Duty Axle & Pedal Vise

157311 AV-5 Heavy Duty Axle & Pedal Vise

127252 Isis Bottom Bracket Installa-tion Tool

Tools



Park 1501 Repair PinsReplacement pins for HCW-4. Pins are 2.3mm (0.0906 inch) diameter.

SKU Model No. MSRP

112315 1501

Park BBT-10 Adjusting Cap ToolDesigned to remove and install adj. caps on Shimano Hollwtech II crank/BB sytems.

SKU Model No. MSRP

148040 BBT-10 $14.49

Park BBT-18 Bottom Bracket and Chainring Lockring ToolHeavy duty cast tool for removing and installing. Shimano and Isis drive 8 notch BB cups. Outside diameter has been changed to fit Isis overdrive BB’s.

SKU Model No. MSRP

136877 BBT-18 $15.59

Park BBT-19 Bottom Bracket ToolThe new BBT-19 is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used w/ either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench.

SKU Model No. MSRP

136869 BBT-19 $22.49

Park BBT-22C Shimano Cartridge Bottom Bracket ToolUsed to install and remove Shimano and Isis drivesplined bb cup’s. Uses a flat tooth profile to ensure maximum engagement. Can be turned w/ 3/8" drive torque wrench, 3/8" ratchet, 32 mm wrench, 1" wrench or FRW-1.

SKU Model No. MSRP

136875 BBT-22 $18.29

Park BBT-29 Bottom Bracket ToolThe BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups w/ an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups w/ an outside diameter of 48.5mm (e.g. FSA MegaExo).

SKU MSRP

158723

Park BBT-30.3 Bottom Bracket Bearing Tool SetDesigned to remove and install bearing and bearing units used in BB30 and SRAM Press fit 30 BB assemblies. Includes two installation bushings used in conjunction w/ HHP-2 or HHP-3. Includes bearing remover.

SKU Model No. MSRP

148041 BBT-30.3 $41.29

112315 1501 Repair Pins

148040 BBT-10 Adjusting Cap Tool

136877 BBT-18 Bottom Bracket and Chainring Lockring Tool

136869 BBT-19 Bottom Bracket Tool

136875 BBT-22C Shimano Car-tridge Bottom Bracket Tool

158723 BBT-29 Bottom Bracket Tool

148041 BBT-30.3 Bottom Bracket Bearing Tool Set

Tools

601800-283-2453


Park BBT-32C Shimano & Isis Bottom Bracket ToolEconomical and compact, this version of the BBT-22 tool is perfect for the home mechanic. The BBT-32 installs and removes Shimano and Isis Drive 20 tooth splined bottom bracket cups and features 32mm wrench flats.

SKU Model No. MSRP

139559 BBT-32 $11.95

Park BBT-5 FR-11 Bottom Bracket Tool• Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use w/o removal of cones and locknuts • Fits all Campagnolo cassette lockrings • Also fits Campagnolo Record, Chorus, Centaur and Athena bottom brackets •The outside diameter of the BBT-5/FR-11 is 22.8mm, and has 12 splines.

SKU Model No MSRP

101888 BBT-5

Park BBT-7 Lockring ToolLaser cut. Engages 5 of the lockring notches. For Dura-Ace & XTR.

SKU Model No MSRP

123273 BBT-7 $18.39

Park BBT-9 Bottom Bracket ToolDesigned to remove and install Shimano Hollowtech II bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 notches of the bottom bracket cups, while the other end engages the 8 internal splines of crank arm adjustment cap.

SKU Model No. MSRP

130940 BBT-9 $21.49

Park BBT-90.3 Bottom Bracket Bearing Tool SetDesigned to remove and install bearing and bearing units used in BB90, BB92, Shimano Press Fit, SRAM Press Fit GXP Race Face Press Fit and other press fit BB systems. Includes two installation bushings used in conjunction w/ HHP-2 or HHP-3. Includes bearing remover.

SKU Model No. MSRP

148042 BBT-90.3 $46.95

Park CBP-3 Campagnolo Bearing Puller and Installation SDesigned and built to install and remove the pressed bearing used on Campagnolo and Fulcrum Ultra-Torque cranks.

SKU Model No. MSRP

145422 CBP-3 $65.95

Park CBP-5 Campagnolo Power Torque Crank and Bearing Adapter SetThe CBP-5 is used in conjunction w/ the CBP-3 set to remove and install Power-Torque crank arms and right side crank bearings.

SKU MSRP

151525 $62.95

139559 BBT-32C Shimano & Isis Bottom Bracket Tool

101888 BBT-5 FR-11 Bottom Bracket Tool

123273 BBT-7 Lockring Tool 130940 BBT-9 Bottom Bracket Tool

148042 BBT-90.3 Bottom Bracket Bearing Tool Set

145422 CBP-3 Campagnolo Bearing Puller and

Installation S

151525 CBP-5 Campagnolo Power Torque Crank and

Bearing Adapter Set

Tools



Park HCW- 5 Double End Lock Ring SpannerFor lock rings on the traditional threaded bottom brackets.

SKU Model No MSRP

109917 HCW-5 $15.59

Park HCW-11 Adjustable BB Cup WrenchFits slotted BB adjusting cups and cups w/ raised 16mm wrench flats.

SKU Model No. MSRP

118269 HCW-11 $15.95

Park HCW-4 Box End Pin Spanner WrenchFor traditional threaded bottom brackets. 36mm wrench.

SKU Model No MSRP

109916 HCW-4 $18.95

Park SPA-1 Hanger Pin Cup SpannerFits adjusting cups on most three piece cranks.

SKU Model No MSRP

109936 SPA-1 $9.49

Park Spa-6 Adjustable SpannerUses hardened replaceable pins. Designed for heavy duty use.

SKU Model No. MSRP

109940 Spa-6 $18.49

Park TW-2 Torque WrenchSKU Model No. MSRP

155281 TW-2 $52.95

Pedro’s BB Socket HolderHolds socket to BB axle to prevent slipping. Works with both tapered and splined BB axles.

SKU MSRP

135062 $13.00

Pedro’s External Bearing BB SocketFits the latest external-cup BB designs. Pedro's has developed one of the industry's toughest and tightest external sockets to install and remove external bottom bracket cartridges. Socket accepts a half-inch drive

SKU MSRP

140593 $20.00

109917 HCW- 5 Double End Lock Ring Spanner

118269 HCW-11 Adjustable BB Cup Wrench

109916 HCW-4 Box End Pin Spanner Wrench

109936 SPA-1 Hanger Pin Cup Spanner

109940 Spa-6 Adjustable Spanner

155281 TW-2 Torque Wrench

135062 BB Socket Holder 140593 External Bearing BB Socket

Tools

603800-283-2453

Tools - Brake Tools

Shimano TL-UN74-S Cartridge Bottom Bracket ToolShop quality tool for removing and installingShimano splined 20 tooth BB cups

SKU MSRP

122420 $19.99

Truvativ GXP HOWITZER BB Install Tool Designed for Truvativ GXP and Howitzer BB Installation and removal.

SKU MSRP

136745

Truvativ Isis Lockring BB Install ToolIsis BB Cup remover.

SKU Spec's MSRP

128295 w/ 1/2" Fitting

XLC Bottom Bracket Removal Tool w/ HandleSKU MSRP

143485 $25.00

XLC Bottom Bracket Tool Shimano IsisFor use w/ 24 mm width across flats or 1/2" ratchet.

SKU Color MSRP

157122 Black $19.00143488 Silver $22.00

Tools - Brake Tools

Avid Hand-Held Hydraulic Hose Barb DriverThe Avid Hand-held Hydraulic Hose Barb Driver tool allows for easy installation of both barbed and threaded hose barbs for super-quick hose length customization. Hydraulic hose is conveniently held in place w/ a locking clamp and w/ a twist of the handle hose barbs are easily driven into a freshly cut hydraulic hose. No more pliers. Works w/ RockShox XLox and Reverb hydraulic hoses too

SKU Color MSRP

148606 Black $34.00

Avid Hand-Held Hydraulic Hose CutterQuick, precise and easy to use, the Avid hand-held hydraulic hose cutter makes shortening hydraulic hoses a snap. Spring-loaded and includes replacement blades. Works w/ RockShox XLox and Reverb hydraulic hoses too.

SKU Color MSRP

148605 Black $23.00

122420 TL-UN74-S Cartridge Bottom Bracket Tool

136745 GXP HOWITZER BB Install Tool

128295 Isis Lockring BB Install Tool

143485 Bottom Bracket Removal Tool w/ Handle

143488 Bottom Bracket Tool Shimano Isis

148606 Hand Held Hydraulic Hose Barb Driver

148605 Hand Held Hydraulic Hose Cutter

Tools



Park BT-2 Fourth Hand Locking Brake ToolThe Park Tool Cable Stretcher pulls both gear and brake cables tight. With coated blue handle.

SKU Model No MSRP

109886 BT-2 $48.95

Park DT-2C Rotor truing ForkSpecially designed and precisely manufactured to gently adjust bent disc brake rotors. The DT-2 features two different slot depths and is laser cut from high quality stainless steel. Center handle is vinyl dipped for comfort.

SKU Model No MSRP

134513 DT-2C $18.59

Park DT-3 Rotor Truing GaugeAccurately gauge the straightness of disc rotors.Infinitely adjustable. Finely threaded indicator.Works with any diameter rotor.

SKU Model No MSRP

135637 DT-3 $44.95

Park DT-3i Dial Indicator Kit for DT-3Bolts directly to DT-3 for greater accuracy.

SKU Model No MSRP

135638 DT-3i $44.95

Park PP-1.2 Hydraulic Brake Piston PressThe unique, wedge-shaped PP-1.2 slides into a hydraulic disc brake caliper to pre-set the piston when replacing pads, aligning pads, and performing other service procedures. Makes hydraulic disc brake maintenance and repair faster and easier.

SKU MSRP

154437 $20.95

Park TS-2di Gauge Set for TS-2.2Measures a wheel’s lateral and radial run-out to .01mm. Mounts easily to any TS-2 or TS-2.2 Truing Stand. Enables user to set and follow tolerances for each wheel. Includes two dials, mounting brackets and specially designed tips.

SKU Model No. MSRP

145087 TS-di $139.95

Pedro’s Cable PullerApplies desired amount of tension on cables while tightening pinch bolts. Perfect fit in left hand while adjusting brakes. Heat-treated tool steel construction. Ergonomic grips for added comfort and control. Built-in thumb lock . Lifetime warranty.

SKU MSRP

138900 $30.00

109886 BT-2 Fourth Hand Locking Brake Tool

134513 DT-2C Rotor truing Fork

135637 DT-3 Rotor Truing Gauge

135638 DT-3i Dial Indicator Kit for DT-3

154437 PP-1.2 Hydralic Brake Piston Press

145087 TS-2di Gauge Set for TS-2.2

138900 Cable Puller

Tools

605800-283-2453

Tools - Cable Cutters

XLC Cable Puller 4th Hand ToolPulls and holds brake and gear cables for precise adjustment. Coated handles provide better grip.

SKU MSRP

157123 $16.00

Tools - Cable Cutters

Park CN-10C Professional Cable & Housing CutterDual density grips, built-in crimper and forming hole. Cold forged, heat treated steel with precision ground cutting jaws.

SKU Model No. MSRP

127677 CN-10C $37.95

Pedro’s Cable CutterHeat-treated tool steel construction and comfortable, cushioned handles make this an industry favor-ite. Quickly and easily cuts brake and derailleur cables, housing and other wire. Lifetime warranty.

SKU MSRP

131839 $35.00

Shimano TL-CT10 Wire Cutter Designed specifically for bicycle cables and casing.

SKU MSRP

108394

Shimano TL-CT12 Wire CutterDesigned specifically for bicycle cables and casing. Awl on one end.

SKU MSRP

153141 $84.99

XLC Cable and Housing CutterCable cutter for inner wires and outer casings.

SKU MSRP

143535 $23.00

127677 CN-10C Professional Cable & Housing Cutter

131839 Cable Cutter

108394 TL-CT10 Wire Cutter

153141 TL-CT12 Wire Cutter

143535 Cable and Housing Cutter

Tools


Tools - Chain Tools

Tools - Chain Tools

Cyclo Rivoli Uniglide Chain ToolUpdated to work w/ all 3/32" chains (except 9 speed).

SKU Model Spec's MSRP

118702 MK2/Rivex Single, 5-8s

Cyclo Rivoli Universal Chain ToolWorks on 7, 8, or 9 speed chains. Longer handle.

SKU Spec's MSRP

124349 9s

Lifu Chain ToolSKU Spec's MSRP

125774 For 3/16" Chain

Park CC-2 Chain Checker Wear GaugeFind out if a chain has stretched beyond acceptable limits with this handy tool.

SKU Model No MSRP

121750 CC-2 $24.49

Park CC-3.2C Chain Wear IndicatorThe CC-3.2 is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

SKU Model No. MSRP

150892 CC-3.2 $10.69

Park CT-11 Rivet Peening ToolFor Campagnolo 11-speed chain. The CT-11 will not install or remove chain rivets. Its sole function is to peen and secure the end of the Campagnolo 11-speed connecting rivet.

SKU Model No. MSRP

145423 CT-11 $53.95

Park CT-3.2 Chain ToolA shop favorite updated for 2013. The CT-3.2 features an adjustable locating shelf so it will remove and install the chain rivet on any bike chain, from 5 to 11-speed derailleur chains to 1/8"and 3/16" single-speed chains. Made from investment cast steel, the CT-3.2 has a comfortable to use size and fine thread for making easy work of even the toughest rivets. Replaceable pin (part CTP).Note: CT-3.2 will not peen the rivets on Campagnolo 11-speed chains.

SKU Model No. MSRP

155812 CT-3.2 $34.95

118702 Uniglide Chain Tool

124349 Universal Chain Tool

125774 Chain Tool

121750 CC-2 Chain Checker Wear Gauge

150892 CC-3.2C Chain Wear Indicator

145423 CT-11 Rivet Peening Tool

155812 CT-3.2 Chain Tool

Tools

607800-283-2453

Tools - Chain Tools

Park CT-4.2 Master Chain ToolRecently modified to work w/ Shimano Dura-Ace CN-7900 chain, a model the original CT-4 did not fit. • Designed to work w/ most high quality, narrow profile derailleur chains (will not fit Wipperman chains).

SKU Model no. MSRP

145099 CT-4.2

Park CT-4.3 Master Mechanic Chain ToolSpecially designed to work w/ the tight tolerances and narrow profiles of 10 and 11-speed chains, the powerful CT-4.3 is a precision tool that can be used to install and remove most 5 to11-speed derailleur chains. Without a doubt the most accurate chain tool we’ve ever built.

SKU Model No. MSRP

155813 CT-4.3 $66.95

Park CT-5 Compact Chain ToolThe best portable chain tool.

SKU Model No MSRP

101111 CT-5 $16.95

Park CT-6.3 Folding Chain Tool w/ Peening AnvilNow 11-speed compatible, the CT-6.3 removes and installs chain rivets in all derailleur chains. Smooth and powerful, this handy take-along is encased in a stainless steel shell, which becomes a comfortable handle when opened. Built-in anvil to peen Campagnolo 11-speed chain rivets.

SKU Model No. MSRP

155814 CT-6.3

Park CTP Replacement Pin These pins fit Park Tool's CT-1, CT-2, CT-3, CT-5 and CT-7 Chain Tools. Made from hardened alloy tool steel. One pin.

SKU Model No. MSRP

109898 CTP $1.69

Park CTP-4K Replacement Pin Kit for CT-4Includes four ( 4 ) hardened replacement pins and one replacement ball bearing for CT-4 chain tool.

SKU Model No. MSRP

142545 CTP-4K $16.95

Park MLP-1.2 Master Link PliersMany bicycle derailleur chains use a "master link" to separate the chain during removal, and to join the chain for installation. While most of these type master link can be removed by hand, oftentimes dirt, corrosion & wear can make the process difficult. MLP-1.2 Master Link Pliers make the removal & instal-lation of these links quick and easy.

SKU MSRP

158042

145099 CT-4.2 Master Chain Tool

155813 CT-4.3 Master Mechanic Chain Tool

101111 CT-5 Compact Chain Tool

155814 CT-6.3 Folding Chain Tool w/ Peening Anvil

109898 CTP Replacement Pin

142545 CTP-4K Replacement Pin Kit for CT-4

158042 MLP-1.2 Master Link Pliers

Tools


Tools - Chain Tools

Pedro’s Pro Chain Tool 2.0A Pro level chain tool. Ergonomic elastomer handles, updated replaceable bridge design, precision 10-speed spacing, includes 2 replacement pins stored in the handle!

SKU MSRP

140589 $60.00

Pedro’s Pro Chain Tool Replacement PinsReplacement pins for Pedro’s Pro 2.0 chain tool.

SKU MSRP

140590 $6.00

Pedro’s Tutto Chain ToolTutto's Proprietary Speed Dial (patents pending) handles single through 8-, 9-, 10-, and 11-speed chains. A fourth position on the Speed Dial provides the anvil required to flare the roller pin on Campagnolo 11-speed chains, per the manufacturer’s requirement. Dual-function RPG (Retracting Pin Guide, pat-ents pending) eliminates misalignment and breakage. Also encloses guide pins to prevent loss, bending or breakage. Lifetime warranty.

SKU Spec's Color MSRP

145382 7 - 11s Black $120.00

Salt BMX Chain ToolCrMo chain tool for use w/ 1/8" chains. Spare pin & half-link alignment pin stored in handle.

SKU MSRP

148534

Shimano TL-CN28 Chain Cutter6-11s Chain

SKU MSRP

155969

Shimano TL-CN32 Chain CutterFor use w/ 11 speed chain.

SKU Color MSRP

155406 Black

XLC Chain Tool Replacement Pin 10 per BoxReplacement pins for XLC chain tool.

SKU Qty MSRP

146913 10/Box $17.00

140589 Pro Chain Tool 2.0

145382 Tutto Chain Tool

148534 BMX Chain Tool

146913 Chain Tool Replacement Pin 10 per Box

Tools

609800-283-2453

Tools - Cleaning Tools

XLC Hyperglide Uniglide Chain ToolSKU MSRP

143541 $15.00


Finish Line Easy Pro Brush SetFive different brushes, each uniquely shaped to reach and clean all bicycle parts.

SKU MSRP

128272 $17.99

Finish Line Gear FlossGear Floss is a perfect detailing tool for cleaning between gears and all the tight spots on your bike. Attracts and holds dirt and grime. The special microfiber ropes are highly tear-resistant and can be washed. Each rope is 20" long.

SKU Size Qty Color MSRP

149071 20" Microfiber Rope 20/Pkg White $6.99

Finish Line Grunge Brush Scrub the all four sides of the chain w/ the compact bristles of the Grunge Brush. Use the long Bristles to clean tight and hard to reach areas: Sprockets;Derailleurs; Cranks; Brakes; Pedals, etc.

SKU MSRP

138664 $12.99

Finish Line Shop Quality Chain CleanerHeavy-duty industrial resin body, will not crack or break when dropped. New exit angle and foam exit eliminates dripping. A new quick and simple attachment design and an oversized magnet to collect metal filings.

SKU MSRP

135676 $24.99

Finish Line Shop Quality Chain Cleaner KitHeavy-duty industrial resin body, will not crack or break when dropped. New exit angle and foam exit eliminates dripping. A quick and simple attachment design and an oversized magnet to collect metal filings. Includes 4oz Ecotech degreaser and 2oz Teflon Plus Lubricant.

SKU MSRP

132937 $34.99

143541 Hyperglide Uniglide Chain Tool

128272 Easy Pro Brush Set

149071 Gear Floss 138664 Grunge Brush

135676 Shop Quality Chain Cleaner

132937 Shop Quality Chain Cleaner Kit

Tools



Finish Line Starter Kit 1-2-3The Starter Kit 1-2-3 includes: a Grunge Brush; 4oz bottle of Multi Degreaser, and a 2oz bottle of Teflon Dry Lube. Everything needed for quick and easy drive train cleaning.

SKU MSRP

149070 $19.99

Park BCB-4 Bike Cleaning BrushA set of 4 brushes, including the GCS-1 for all bicycle cleaning jobs. Also includes tire & frame brush, sponge brush, and conical detail brush. Sure grip dual density handles.

SKU Model No. MSRP

127761 BCB-4 $20.95

Park CG-2.2 Chain GangIncludes:• CM-5.2 Chain Scrubber• GSC-1 GearClean Brush• 8 oz bottle of CB-2 Citrus Chain Brite• The CG-2 works on all derailleur bikes and many 3-speed and coaster brake bikes.

SKU Model No. MSRP

152903 CG-2.2 $34.95

Park CM-5.2 Cyclone Chain ScrubberKeeping your chain clean is an essential part of good bike maintenance. The CM-5.2 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean.

SKU Model No. MSRP

152904 CM-5.2 $26.49

Park GSC-1C Gear System Cleaner BrushTough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and freewheel.

SKU Model No MSRP

114976 GSC-1 $4.95

Park RBS-5 Replacement Brush Set for Cyclone Chain ToolIncludes one geared scrubbing brush, two rolling brushes and two wicking sponges.

SKU Model No. MSRP

126786 RBS-5 $10.49

149070 Starter Kit 1-2-3

127761 BCB-4 Bike Cleaning Brush

152903 CG-2.2 Chain Gang

152904 CM-5.2 Cyclone Chain Scrubber

114976 GSC-1C Gear System Cleaner Brush

126786 RBS-5 Replacement Brush Set for Cyclone Chain Tool

Tools

611800-283-2453


Pedro’s Chain KeeperThe Chain Keeper is inserted into the right rear dropout when the wheel is removed for cleaning, storing, or transporting bikes. A cherished item by pro mechanics that have to maintain a crowded team truck. Designed to maintain chain tension during cleaning. Quick release lever allows for fast installation and removal.

SKU MSRP

138898 $15.00

Pedro’s Pro Brush KitBicycle specific brushes designed to detail any bike. Brushes includes: wheel brush, Toothbrush, parts cleaning brush, wand brush and twisted wire brush to clean even the most hard to reach places of a bicycle. Bag allows for easier storage and faster drying of brushes.

SKU MSRP

140585 $22.00

Pedro’s Toothbrush Gear Cleaning BrushDurable double-ended brush, ideal for cogs, derailleurs, chainrings. Solvent resistant synthetic handle & bristles.

SKU MSRP

126860 $7.00

White Lightning The Trigger Chain Cleaning SystemCombines the cleaning power of Clean Streak with the scrubbing action of a chain cleaner. Chain cleaner mounts to a 12oz bottle of clean streak and sprays the degreaser directly on the chain while the brushes and chain scrubber break down and scrub away grease, grime and dirt.

SKU MSRP

133072 $25.99

XLC Brush SetSKU MSRP

143543 $22.00

XLC Sprocket Cleaning SetSKU MSRP

143542 $15.00

138898 Chain Keeper

140585 Pro Brush Kit

126860 Toothbrush Gear Cleaning Brush

133072 The Trigger Chain Cleaning System

143543 Brush Set

143542 Sprocket Cleaning Set

Tools


Tools - Cone Wrenches

Tools - Cone Wrenches

Park DCW Double End Cone WrenchesDesigned for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use

SKU Model no Size MSRP

109909 DCW-1C 13/14mm $4.95109910 DCW-2C 15/16mm $4.95111089 DCW-3C 17/18mm $4.95121567 DCW-4C 13/15mm $4.95

Park MWF-1 Flare Nut WrenchThis 8/10mm wrench is to be used to safely open and close the compression nut on hydraulic brake calipers and levers. Featuring angled heads for easy access and unique, semi-box openings to reduce the risk of damaging hydraulic fittings or lines.


158467 MWF-1 8/10mm

Park SCW Series Shop Cone WrenchesPrecision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting cones, the SCW Shop Cone Wrenches have a long, vinyl dipped handle for leverage and comfortable use.


103856 SCW-13 13mm $8.95103857 SCW-14 14mm $8.95103858 SCW-15 15mm $8.95103859 SCW-16 16mm $8.95103860 SCW-17 17mm $8.95103861 SCW-18 18mm $8.95125438 SCW-19 19mm $8.95127681 SCW-20 20mm $8.95148050 SCW-21 21mm $8.95136870 SCW-22 22mm $8.95145097 SCW-23 23mm $8.95145098 SCW-24 24mm $8.95158468 SCW-26 26mm $8.95142518 SCW-28 28mm $8.95

Park Shop Cone Wrench SetIncludes all cone wrenches produced by Park Tool: 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, and 28mm sizes. The wrenches in the SCW-SET.2 use Park's “Y" head design for strength and a durable industrial phosphate finish. The handles are vinyl-dipped for comfort and sure handed grip.

SKU Model No. Spec's MSRP

158223 SCW-SET.2 13 pieces $69.95

109909 DCW Double End Cone Wrenches

125438 SCW Series Shop Cone Wrenches

Tools

613800-283-2453

Tools - Crank & Chainring Tools

XLC Long Handle Cone WrenchNo slip plastic handle. Shop-quality tooling.

SKU Size MSRP

143501 13mm $8.00143503 15mm $8.00143504 16mm $8.00143507 19mm $8.00


Park CCP-22C Cotterless Crank PullerLong comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Fits all cranks using 22mm x 1 threads.

SKU Model No. MSRP

142547 CCP-22C $15.29

Park CCP-44C Crank PullerFor Shimano splined crank arms. With a stronger, smoother operating tip. Won't work on square spindles.

SKU Model No. MSRP

142548 CCP-44C $15.89

Park CCW-5C Crank Bolt WrenchFeatures both a 14mm socket and 8mm hex wrench on a long, comfortable handle.

SKU Model No. MSRP

134518 CCW-5C $11.29

Park CDG-2 Chainring Diameter GaugeSelecting a replacement chainring requires knowing the BCD. The CDG-2 quickly and easily measures BCD for a variety of four & five bolt chainring patterns. Made from anodized aluminum w/ permanently laser engraved markings. The CDG-2 includes a center-to-center measuring scale and a reference chart to help determine less common chainring patterns.

SKU Model No. MSRP

159289 CDG-2 $32.95

Park CNW-2 Chainring Nut WrenchDouble ended to fit most slotted-type nuts.

SKU Model No. MSRP

136364 CNW-2 $3.95

Park CWP-7C Crank Puller/ WrenchHas two rotating tips, 11.3mm and 16.3mm for use w/ splined Octalink and Isis drive crank arms.

SKU Model No. MSRP

142546 CWP-7C $14.95

143501 Long Handle Cone Wrench

142547 CCP-22C Cotterless Crank Puller

142548 CCP-44C Crank Puller

134518 CCW-5C Crank Bolt Wrench

136364 CNW-2 Chainring Nut Wrench

142546 CWP-7C Crank Puller/ Wrench

Tools



Pedro’s Universal Crank Remover ToolNice long comfortable handle. 8mm hex for axle bolt removal. Fits splined and square taper crank spindles.

SKU Spec's MSRP

132999 w/ Handle $25.00

Redline Device Crank Installation ToolWorks on all 19mm 48-spline Device cranks, and many others as well.

SKU Size MSRP

148750 19mm $11.99

Shimano TL-FC15 105 Crank Arm Plug ToolSKU MSRP

124274 $5.49

Shimano TL-FC16 Crank Plug ToolSKU Spec's MSRP

130638 for Hollowtech II $1.49

Shimano TL-FC21 Chainring Bolt Peg SpannerUse one end of this spanner for installation and removal of chainring bolts. Use the other end for Shimano one-key crank release bolds.

SKU MSRP

120479 $5.49

Shimano TL-FC32 BB Install ToolSKU Spec's MSRP

130639 For Hollowtech II $16.99

Shimano TL-FC35 XTR Crank Arm Plug ToolCrank arm installation and removal toolFor 2007 Model XTR crank sets

SKU Model MSRP

147312 2007 $50.99

XLC Crank Arm ExtractorISIS model is for use w/ 8mm hex or 15mm flat wrenches to remove crank arms from ISIS or Octalink pipe spindle BB's. Square model is for use w/ 15mm flat wrenches to remove crank arms from most Square Taper spindle BB's and features a 14mm socket to fit most crank bolts.

SKU Model MSRP

143489 ISIS $10.00157121 Square $15.00

132999 Universal Crank Remover Tool

148750 Device Crank Installation Tool

124274 TL-FC15 105 Crank Arm Plug Tool

130638 TL-FC16 Crank Plug Tool

120479 TL-FC21 Chainring Bolt Peg Spanner

130639 TL-FC32 BB Install Tool

147312 TL-FC35 XTR Crank Arm Plug Tool

143489 Crank Arm Extractor

Tools

615800-283-2453

Tools - Cutting Tools

XLC Crank Arm Puller w/ HandleCrank extractor on a 6" no slip black handle.

SKU MSRP

143486 $25.00

XLC External BB Cup WrenchFits Shimano Hollowtech II & Truvativ GXP external Bottom Bracket cups. Crank Arm dust cap remover included.

SKU MSRP

143484 $27.00


Park BTS-1 Bottom Bracket Tap & Face CutterThe BTS-1 is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame.

SKU Model No MSRP

100148 BTS-1 $599.95

Park CF-2 Tool Cutting FluidEnvironmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. Can effectively be used on all metals. 8 oz bottle.

SKU Model No. MSRP

134579 CF-2 $13.49

Park CSB-1 Carbon Cutting Saw Blade12" Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Fits Park Tool SAW-1 Hacksaw and most 12" hacksaws.

SKU Model No. MSRP

149197 CSB-1 $8.49

Park SAW-1 HacksawAluminum die cast frame construction, blade tension adjuster and comfortable handle. Includes one blade and accepts any 12" (300mm) hacksaw blade.

SKU Model No. MSRP

140347 SAW-1 $22.95

Park SG-6 Threadless Fork Saw GuideDesigned to ensure a straight, clean cut on threadless forks, the SG-6 fits 1", 1-1/8" and 1-1/4" forks. A must for use with threadless fork systems.

SKU MSRP

100499 $37.95

143486 Crank Arm Puller w/ Handle

143484 External BB Cup Wrench

100148 BTS-1 Bottom Bracket Tap & Face Cutter

134579 CF-2 Tool Cutting Fluid

149197 CSB-1 Carbon Cutting Saw Blade

140347 SAW-1 Hacksaw

100499 SG-6 Threadless Fork Saw Guide

Tools



Park SG-7.2 Oversized Saw GuideAccurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 3.5" (89mm), as well as fork steerer tubes and other round tubes from 1" to 1-3/4" (32mm to 45mm). The SG-7.2 features two different cutting slots —standard and carbon cutting blade widths — in a hardened steel body w/ molded contact points to protect tubes and frames.

SKU MSRP

157633 $42.95

Park SG-8 Carbon Blade Saw GuideSpecially designed to accommodate wider, carbon specific saw blades, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4". The SG-8 accomodates blades up to 2.5mm (3/32") wide.

SKU MSRP

157634 $43.95

Park TAP Series Pedal Tap SetTo be used to clean up damaged threads, Includes Taps for RH and LH threads.


121273 TAP-3C 1/2" $36.95121272 TAP-6C 9/16" $49.95

Park TAP-10 Rear Derailleur Hanger Tap10mm x 1mm frame tap for derailleur hanger.

SKU Model No MSRP

118947 TAP-10 $10.49

Tools - Frame & Fork Tools

Park CRP-2 Adjustable Crown Race PullerThe CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. The CRP-2 is fully adjustable, allowing precise, independent positioning of each blade around the crown race. Locating each blade independently provides flexibility to fit around crown race interferences. Universal design works w/ 1", 1-1/8", 1-1/4" and 1.5 forks (suspension or rigid) and crown races w/ outside diameters up to 64mm.

SKU Model No. MSRP

155811 CRP-2

Park CRS-1 Crown Race Setting ToolSafely install any crown race with this convenient tool.

SKU Model No MSRP

121467 CRS-1 $84.95

121273 TAP Series Pedal Tap Set

118947 TAP-10 Rear Derailleur Hanger Tap

155811 CRP-2 Adjustable Crown Race Puller

121467 CRS-1 Crown Race Setting Tool

Tools

617800-283-2453


Park CRS-15 Crown Race Setter for 1.5" Steer ColumnSKU MSRP

140302 $83.29

Park DAG-2 Derailleur Hanger Alignment ToolThreads directly into the derailleur hanger. made of heavy-gauge steel and is chrome plated.

SKU Model No. MSRP

142549 DAG-2 $74.95

Park DT-1.2 Disc Tab Mount Facing ToolThe DT-1.2 precisely machines frame and fork disk brake tabs, removing paint and material to ensure they are flat and parallel w/ the brakes pads and the rotor. Works on forks w/ 100mm open dropouts and forks w/ closed dropouts using 15mm and 20mm thru axles. Works on frames w/ 135mm open drop-outs and frames w/ closed dropouts using 12mm thru axles in 135mm, 142mm and 150mm lengths

SKU Model No. MSRP

155815 DT-1.2 $27.95

Park DT-4.2 Disc Post Mount Facing ToolEngineered and built to accurately face frame and fork mounted disc brake posts. The DT-4.2 machines the posts parallel w/ each other, perpendicular to the rotor, and to an equal height. Includes axle for 100mm x 9mm and 135mm x 10mm spaced frames. Also will work w/ 130mm spacing. Fits 12mm thru-axle frames, 15mm thru-axle forks by using the included spacer and axle from frame/fork. Fits 20mm thru-axle forks using body of DT-4.2 directly, no spacer required. Includes to parallel gauges.

SKU Model No. MSRP

157312 DT-4.2 $249.95

Park FFG-2 Frame / Fork Alignment GaugeFFG-2 quickly determines whether rear frame or front fork dropouts are aligned and parallel. These Park Tool gauges adjust to compensate for various hub widths from 100 to 160mm.

SKU Model No. MSRP

136882 FFG-2 $109.95

Park Frame Alignment GaugeMany bicycles will not shift or track properly because the front and rear wheels are not in line w/ the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles.

SKU Model No. MSRP

158220 FAG-2 $49.95

Park HHP-2 Head & Hanger Cup PressInstall head cups in standard and oversize frames the right way.

SKU Model No MSRP

109921 HHP-2 $169.95

140302 CRS-15 Crown Race Setter for 1.5” Steer Column

142549 DAG-2 Derailleur Hanger Alignment Tool

155815 DT-1.2 Disc Tab Mount Facing Tool

136882 FFG-2 Frame / Fork Alignment Gauge

109921 HHP-2 Head & Hanger Cup Press

Tools



Park HHP-3 Home Mechanic Bearing Cup PressSimple and economical, the HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups

SKU Model No. MSRP

140007 HHP-3 $79.95

Park ISC-4 Internal Seat Tube ClampInsert into frames’ seat tube and tighten knob. Keeps frames from being bent and damaged by clamps. Works on diameters from 24mm to 32mm.

SKU Model No. MSRP

138260 ISC-4 $59.95

Park RT-1 Head Cup RemoverFits standard and oversize headsets. Strong, heat treated alloy steel w/ nickel finish. 1" & 1-18"

SKU Model No MSRP

118339 RT-1 $35.95

Park TNS-1 Star Nut SetterUse to install star nuts in 1" standard and 1-1/8" oversize threadless headset systems.

SKU Model No MSRP

100739 TNS-1 $24.95

Park TNS-15 Threadless Star Nut Setter 1-1/4 & 1.5"The TNS-15 is designed to install star-fangled nuts used specifically w/ 1-1/4 and 1.5" headset systems

SKU MSRP

142517 $37.95

Park TNS-4 Star Nut Setter w/ GuideUse to install star nuts in 1" standard and 1-1/8" oversize threadless headset systems.

SKU Model No. MSRP

136878 TNS-4 $41.95

Tools - Freewheel & Cassette Tools

ACS Crossfire Freewheel ToolACS’ removal tool for the Crossfire Freewheel. 6-spline engagement fits all sizes of Crossfire Freewheels (13 - 22).

SKU Color MSRP

147890 Gun Metal $17.99

140007 HHP-3 Home Mechanic Bearing Cup Press

138260 ISC-4 Internal Seat Tube Clamp

118339 RT-1 Head Cup Remover

100739 TNS-1 Star Nut Setter

142517 TNS-15 Threadless Star Nut Setter 1-1/4 & 1.5”

136878 TNS-4 Star Nut Setter w/ Guide

147890 Crossfire Freewheel Tool

Tools

619800-283-2453


ACS Crossfire Spanner14" steel wrench w/ forged ACS removal tools on either end. One for ACS Crossfire 6-spline freewheels, other for 16t-22t 4-prong freewheels. Tool fits into any tool chest, eliminates need for bench vice, pipe wrench, or other leverage devices. Accommodates 3/8" or 14mm axles.

SKU MSRP

151265 $31.99

Answer BMX 28mm Flat WrenchAnswer’s 28mm flat wrench is for use w/ Alumilite hubs. Use this wrench to hold the cassette body while unthreading the cog for gear changes.

SKU Size MSRP

146788 28mm $27.95

Park FR Freewheel Removal ToolsSKU Model No Spec's MSRP

118873 FR-1 Shimano FW $7.49158812 FR-1.2 Shimano; Sun Race - 9s118874 FR-2 Suntour 2 Prong $6.95118875 FR-3 Suntour 4 Prong $12.95118876 FR-4 Atom $6.95118877 FR-5 Shimano/Sram/Sunrace $5.95130957 FR-5G w/ Guide $7.95102944 FR-6 4-Prong BMX126450 FR-7 Falcon $7.49130947 FR-8 Flip-Flop BMX $13.95

Park FRW-1 Freewheel WrenchUse to hold freewheel tools in the absence of a vise.

SKU Model No MSRP

121560 FRW-1 $49.95

Park HCW-17 Fixed Gear Lockring WrenchFeatures two different radius hooks for a precise fit on most fixed-gear lockrings. 11-5/8" (29cm) in length for excellent leverage.

SKU Model No. MSRP

145120 HCW-17 $16.95

Park SPA-2 Hanger Pin Cup SpannerFits one-key release dust caps and adjusting cone on most freewheels.

SKU Model No MSRP

109937 SPA-2 $9.49

151265 Crossfire Spanner

146788 28mm Flat Wrench

118873 FR Freewheel Removal Tools

121560 FRW-1 Freewheel Wrench

145120 HCW-17 Fixed Gear Lockring Wrench

109937 SPA-2 Hanger Pin Cup Spanner

Tools



Park SR-1 Freewheel Cog Removal ToolUse to remove cogs from freewheels (requires two) or to hold cassettes in place while you loosen the lockring.

SKU Model No MSRP

100500 SR-1 $23.95

Park SR-11 11 Speed Chain Whip / Sprocket RemoverChain fits all 5 to 11-speed cassettes and freewheels. Heat treated steel w/ molded handle for comfort. 1" (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools.

SKU Model No. MSRP

147148 SR-11 $28.95

Park SR-18 Chain Whip / Sprocket RemoverChain fits 1/8" fixed-gear sprockets. Heat treated steel w/ molded handle for comfort. 1" (25.4mm) box end wrench fits Park Tool Freewheel/Cassette Lockring Tools.

SKU Model No. MSRP

147149 SR-18 $21.95

Park SR-2.2 Shop Chain Whip15" Round vinyl dipped handle. Hardened bolts and nuts securely attach the chain to the handle and make chain replacement easy. Works on 5-11 speed cassettes.

SKU Model No. MSRP

151551 SR-2.2 $39.95

Park SS-15C Single Speed SpannerDesigned and built especially for single speed bikes, the SS-15 is a forged spanner w/ a 15mm socket wrench for axle nuts, 15mm open end wrench for pedals, tire lever, and bottle opener. Just the right size and length (17cm/7") to take along or to wrench in the garage.

SKU Model No. MSRP

142521 SS-15C $19.49

Pedro’s Vice WhipFor the professional mechanic, Pedro’s has devised the most secure way to manage cogs of any size. The Vice Whip is the world’s first locking chain whip. Fits cogs from 11T to 23T, makes cassette removal safe and simple. Features: Locking jaws that won’t slip; Compact enough for the toolbox; Heat-treated steal tough enough for everyday use. *Not designed for use w/ 1/8" track cogs

SKU MSRP

142722 $65.00

Redline DNP Freewheel ToolUsed to removed the DNP freewheel found on some 2007 Redline BMX bikes.

SKU MSRP

137918 $17.99

100500 SR-1 Freewheel Cog Removal Tool

147148 SR-11 11 Speed Chain Whip / Sprocket Remover

147149 SR-18 Chain Whip / Sprocket Remover

151551 SR-2.2 Shop Chain Whip

142521 SS-15C Single Speed Spanner

142722 Vice Whip

137918 DNP Freewheel Tool

Tools

621800-283-2453


Shimano Cassette Removal Chainwhip ToolChainwhip for securing cassette while removing HG-style lockrings.Updated SR21 model features a rubber-coated handle.Foe 7/8/9/10 speed

SKU MSRP

148365 $59.49

Shimano TL-HG09 Capreo Lock Ring ToolSKU Spec's MSRP

142977 Capreo Specific $13.99

Shimano TL-LR15 Lockring RemoverSKU Spec's MSRP

122303 With Guide $21.49

Wheels Manufacturing CRT-A1 Cog Remover ToolSKU Size Spec's MSRP

118031 3/32" Each

XLC 5-IN-1 Cog Removal WrenchFive tools in one. 14/15mm wrench, 1/2" chain whip, lockring tool, and bottle opener. Includes a sturdy jersey bag to keep pockets/clothes from becoming greasy.

SKU MSRP

157137 $17.00

XLC Adjustable BB SpannerSKU MSRP

143490 $12.00

XLC Cassette Lockring RemoverToolsShimano

SKU MSRP

143492 $13.00

XLC Freewheel Cog Remover Tool• 3/32" chain, 6,7,8 Speed compatible• 1/8" chain, single track cogs or freewheels• 10" long bar for nice leverage

SKU Size MSRP

157134 1/8" $19.00143491 3/32" $19.00

148365 Cassette Removal Chainwhip Tool

122303 TL-LR15 Lockring Remover

118031 CRT-A1 Cog Remover Tool

157137 5-IN-1 Cog Removal Wrench

143490 Adjustable BB Spanner

143492 Cassette Lockring RemoverTools

143491 Freewheel Cog Remover Tool

Tools



XLC Freewheel Remover ToolFits Shimano, MF

SKU MSRP

143494 $8.00

XLC HG Freewheel Lockring RemoverFits Shimano, HG . Use w/ 1/2" driver and 21mm spanner.

SKU MSRP

143496 $13.00

XLC Suntour 2 Pin Freewheel Lockring RemoverSuntour w/ 2 Pin. For use w/ 23mm wrench.

SKU MSRP

143495 $8.00

XLC Suntour 4 Pin Freewheel Lockring RemoverSuntour w/ 4 Pin. For use w/ 23mm wrench.

SKU MSRP

143493 $10.00

Tools - Hex Tools

Park 50th Anniversary 3-Way HexThe AWS-50 is a limited editon version of Park Tool's famous three-way hex wrench. Available in limited quantities and only in 2013, the AWS-50 features a forged, two piece aluminum body (in Park blue), w/ a laser engraved logo. Hex wrenches are made from industrial strength, heat treated steel and gold plated to commemorate Park Tool's 50th Anniversary.


155442 AWS-50 Blue / Gold $32.95

Park AWS-15 Y Hex WrenchThe AWS-15 features a forged, two-piece, anodized aluminum body. 4/5/6mm hex wrenches are made from industrial strength, heat-treated & plated steel.

SKU Model No. MSRP

159287 AWS-15 $32.95

Park AWS-1C Y Hex WrenchUpdated w/ a comfortable composite center. A must-have for every mechanic. 4/5/6mm hex sizes.

SKU Model No MSRP

109881 AWS-1 $10.95

143494 Freewheel Remover Tool

143496 HG Freewheel Lockring Remover

143495 Suntour 2 Pin Freewheel Lockring Remover

143493 Suntour 4 Pin Freewheel Lockring Remover

155442 50th Anniversary 3-Way Hex

109881 AWS-1C Y Hex Wrench

Tools

623800-283-2453

Tools - Hex Tools

Park AWS-3C Y-Hex Wrench SetA wrench w/ smaller Allen keys is perfect for all those little Allen bolts. Size 2/2.5/3mm hex sizes.

SKU Model No MSRP

122140 AWS-3 $11.95

Park AWS-7C Y-Hex Wrench4mm hex, 5mm hex and T25 Torx style setColor coded rings to quickly find the correct sizeHeat treated for long lifeChamfered tips for a perfect fit

SKU Model No. MSRP

151524 AWS-7C $11.95

Park AWS-8C Y Hex BalldriverBondhus Balldriver hex ends are great for hard to reach Allen bolts. Size 4/5/6mm hex sizes.

SKU Model No MSRP

119443 AWS-8 $11.95

Park Hex Tool WrenchSpecially designed for cranks, free hubs and pedals. Built for speed, leverage and comfort. Dual density, ergonomically designed screwdriver handle molded over an extra long, extra deep, super strong hex.


140305 HT-6 6mm $8.95140306 HT-8 8mm $8.95140307 HT-10 10mm $11.49

Park HR Hex Wrench11mm Hex wrench is for alll 2005 Redline M10 Axle Cassette hubs freehub bodies.

SKU Model No Size MSRP

132840 HR-11 11mm $7.95142893 HR-12 12mm $7.95142894 HR-14 14mm $16.49

Park HR-8C 8mm Hex WrenchDesigned for crank bolt removal.

SKU Model No MSRP

129524 HR-8 $5.95

Park P-Handled Star-Shaped WrenchesBlue nylon handle, high torque industrial steel, fits the bolt heads on many disc brake calipers and rotors.

SKU Model no MSRP

127680 PH-T25 $8.59

122140 AWS-3C Y-Hex Wrench Set

151524 AWS-7C Y-Hex Wrench

119443 AWS-8C Y Hex Balldriver

140305 Hex Tool Wrench

132840 HR Hex Wrench

129524 HR-8C 8mm Hex Wrench

127680 P-Handled Star-Shaped Wrenches

Tools


Tools - Hex Tools

Park P-Handled Torx Wrench SetA set of professional quality, star-shaped wrenches to fit Torx-style fasteners. Includes T6, T8, T10, T15, T20, T25, T30 and T40 sizes. Offset P-handle made from durable nylon and ergonomically de-signed for comfortable use. Made from through-hardened, high torque industrial steel for long life and precision fit.


158221 PH-T1 8 pieces $46.95

Park PH-1 P-Handled Hex Wrench SetBlue Nylon-handled long hex head wrenches w/ Bondhus tips and shorter hex tips at 90°. Holder can be mounted to wall. Set includes 2/2.5/3/4/5/6/8mm hex wrenches and holder.

SKU Model No MSRP

126638 PH-1 $64.95

Park Professional L-Shaped Hex Wrench SetIndustrial steel hex wrenches. balldriver tip on long shaft and straight hex on short shaft. Features chamfered tips and tight tolerances. Includes portable wrench holder. 1.2, 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex sizes. Does not include speed bearing attachments. Bench/wall mount included on HXS-2.2

SKU Model No. MSRP

151540 HXS-1.2 $23.95151546 HXS-2.2 $34.95

Pedro’s L Hex Wrench SetMade from heat-treated tool steel to insure long-lasting performance. Extra length provides great leverage and provides access to hard-to-reach bolts. Includes: 1.5, 2, 3, 4, 5, 6, 8, and 10mm plus plastic holder. Lifetime warranty.

SKU MSRP

126849 $35.00

XLC Key Ring Hex Wrench SetSizes include: 2/2.5/3/4/5/6mm plus a 8mm adaptor.

SKU MSRP

157132 $11.00

XLC L-Shape Hex Wrench SetSizes include: 2/2.5/3/4/5/6/8/10mm. With ball driver.

SKU MSRP

143534 $18.00

XLC Y WrenchEach wrench sold separately. Photo shows hex and socket types.

SKU Model Size MSRP

143509 Hex 4/5/6 mm $10.00146636 Socket 8/9/10 mm $9.00

158221 P-Handled Torx Wrench Set

126638 PH-1 P-Handled Hex Wrench Set

151540 Professional L-Shaped Hex Wrench Set

126849 L Hex Wrench Set 157132 Key Ring Hex Wrench Set

143534 L-Shape Hex Wrench Set

143509 Y Wrench

Tools

625800-283-2453

Tools - Multi-Tools

Tools - Multi-Tools

Crank Brothers B-14 Bit Multi ToolMagnetized Socket driver / bit-based tool system w/ standard-sized stainless steel bits and stainless steel frame. Includes: 1.5, 2,2.5, 3,4, 5, 6, & 8mm Hex bits; #1 & #2 Philips; #1 & #2 flathead screwdriver, T-10 & T-25 Torx bits.

SKU Spec's MSRP

156114 14 Functions $27.00

Crank Brothers B-17 Bit Multi ToolMagnetized Socket driver / bit-based tool system w/ standard-sized stainless steel bits and stainless steel frame. Includes: chain tool; #0 & #1 spoke wrenches; 1.5, 2,2.5, 3,4, 5, 6, & 8mm Hex bits; #1 & #2 Philips; #1 & #2 flathead screwdriver, T-10 & T-25 Torx bits.

SKU Spec's MSRP

156115 17 Functions $33.00

Crank Brothers B-8 Bit Multi ToolMagnetized bit-based tool system w/ standard-sized stainless steel bits and stainless steel frameIncludes 2.5, 3,4,5,6mm hex wrenches, T25 Torx wrench, Phillips and Flat-head screwdrivers


156113 B-8 Blk/Silver $13.00

Crank Brothers Multi-10 Multi-ToolIncludes a 2, 2.5, 3, 4, 5, 6 and 8mm hex, flat and Phillips screwdrivers, and a Torx t-25. 124 grams. 3.5.

SKU Weight Spec's Color MSRP

135002 124g 10 Functions Black $20.00145343 124g 10 Functions Gold/Black $20.00

Crank Brothers Multi-17 Multi-Tool2/2.5/3/4/5/6 and 8mm hex, 8/10mm Open Wrenches, 4 Sizes of Spoke wrenches, Flat and Phillips Screwdrivers, Stainless Steel chain tool and a T-25 Torx. 3.5.



Crank Brothers Multi-19 Multi-Tool2/2.5/3/4/5/6 and 8mm hex, 8/10mm Open Wrenches, 4 Sizes of Spoke Wrenches, 2 Flat and 2 Phillips Screwdrivers, Stainless Steel Chain Breaker and a Torx T-25. 3.5.



Crank Brothers Multi-5 Multi-Tool3/4/5/6mm Hex / Phillips. Lifetime warranty. 3.5.


135005 85g 5 Functions Black $13.00145342 85g 5 Functions Gold/Black $13.00159820 85g 5 Functions Nickle $13.00

156114 B-14 Bit Multi Tool



135002 Multi-10 Multi-Tool




Tools


Tools - Multi-Tools

Park AWS-10C Fold Up Hex Wrench SetThese Allen wrenches come together in a fold-up tool perfect for rides. Weighs 105g w/ 7 funstions.

SKU Model No MSRP

121226 AWS-1 $8.49

Park AWS-11C Fold Up Hex Wrench Set Bike shop quality foldable wrench has all the popular sizes, including crank bolts and freehub body. Weighs 238 grams w/ 6 functions.

SKU Model No MSRP

122141 AWS-11 $13.95

Park AWS-12C Metric & Standard Fold-Up Hex SetMetric wrenches include 2, 3, 4, 5 and 6mm. Fractional sizes are 3/16", 7/32", and 1/4". Weighs 17g w/ 8 functions.

SKU Model No MSRP

126451 AWS-12 $10.49

Park AWS-9 Fold Up Hex Wrench SetThree Allen wrenches, a flat head and a Phillips head screwdriver fold into a handy lightweight tool to carry w/ you anywhere you ride. Weighs 113g w/ 5 functions.

SKU Model No MSRP

121227 AWS-9 $9.69

Park IB-1C I-Beam Mini Fold-up Hex/ScrewdriverFeatures unique I-Beam handle surrounded by 3, 4, 5, 6 and 8mm hex wrenches and a straight blade screwdriver.

SKU MSRP

130945 $15.49

Park IB-2C I-Beam Mini Fold-up Hex Wrench/Screwdriver/TorxI-beam handle w/ 1.5,2,2.5,3,4,5,6, and 8mm hex wrenches; a T25 Torx wrench; and flat screwdriver. strong, compact, lightweight, carded. Weighs 107g w/ 10 functions.

SKU MSRP

130946 $16.95

Park IB-3C I-Beam Mini Fold Up w/ Chain ToolA complete take-along tool combining our award winning I-Beam technology with a full complement of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, T25 star driver, straight blade screw driver, composite wrapped tire lever, two spoke wrenches, and a 10-speed compatible chain tool.

SKU Model No MSRP

134530 IB-3 $26.95

121226 AWS-10C Fold Up Hex Wrench Set

122141 AWS-11C Fold Up Hex Wrench Set

126451 AWS-12C Metric & Standard Fold-Up Hex Set

121227 AWS-9 Fold Up Hex Wrench Set

130945 IB-1C I-Beam Mini Fold-up Hex/Screwdriver

130946 IB-2C I-Beam Mini Fold-up Hex Wrench/

Screwdriver/Torx

134530 IB-3C I-Beam Mini Fold Up w/ Chain Tool

Tools

627800-283-2453

Tools - Multi-Tools

Park MT-1C Multi-ToolTwo Allen wrenches (3-6mm), three socket wrenches, and a flat head screwdriver. Includes socket 8, 9, and 10mm. Weighs 42g w/ 9 functions.

SKU Model No MSRP

102422 MT-1 $11.95

Park MTB-3.2 Premium Rescue ToolNow w/ more tools, an upgraded chain tool and a sleeker, smaller size. The MTB-3.2 is built to tackle nearly any road or trailside emergency repair. It’s small enough to take along yet the tools feature enough leverage to make repairs quick and easy.

SKU Model No. MSRP

155817 MTB-3.2 $31.95

Park MTB-7 Rescue Tool2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches. Tire levers (2). Phillips head screwdriver. Straight blade screw-driver. T25 star-shaped driver. 0.127", 0.130", & 0.136" spoke wrenches. 8, 9, & 10mm box end wrenches. Chainring nut wrench. Dust cap remover. Serrated knife. Bottle opener . Weighs 215g w/ 21 functions.

SKU Model No MSRP

128966 MTB-7 $19.95

Park TWS-2 Torx Wrench SetThe TWS-2 combines (T7, T8, T10, T15, T20, T25, T30, and T40) in a convenient fold-up set. Composite handle, comfortable to use, and slip resistant. Weighs 147g w/ 8 functions.

SKU Model No MSRP

128970 TWS-2 $20.95

Park TWS-3C Torx Y-WrenchA Torx compatible 3-way wrench. T10, T25 and T30 wrench sizes in our classic three-way “Y” design. Useful for disc rotor bolts, some chainring bolts, and hydraulic work.

SKU Model No. MSRP

148049 TWS-3C $10.59

Topeak Alien II Multi-Tool26 tools fold into a lightweight 2 piece body. 2/2.5/3/4/5/6/8/10mm Allen wrenches, T25 Torx, 8/9/10mm box wrenches(2X), 14/15g spoke wrenches, tire levers,mini pedal wrench, Phillips and flat screw drivers, knife, bottle opener, chain hook, chain tool and nylon carry bag.

SKU Weight Spec's MSRP

131084 270g 26 Functions $49.95

Topeak Alien XS Multi-Tool16 function lightweight tool scaled down to the minimum size. 2/2.5/3/4/5/6/8mm Allen wrenches,8/9/10mm box wrenches, Phillips and flat screw drivers, knife & bottle opener to handle almost everything you could encounter while out on a ride.

SKU MSRP

150915 $24.95

102422 MT-1C Multi-Tool

155817 MTB-3.2 Premium Rescue Tool

128966 MTB-7 Rescue Tool

128970 TWS-2 Torx Wrench Set

148049 TWS-3C Torx Y-Wrench

131084 Alien II Multi-Tool

150915 Alien XS Multi-Tool

Tools


Tools - Multi-Tools

Topeak Hexus II Multi-ToolIncludes: 2, 2.5, 3, 4, 5, 6, 8mm Allen wrenches. A T25 Torx Bit, 14 and 15g spoke wrench, Chain tool and chain hook, Philips and flat head screw driver, 2 plastic tire levers.


145349 167g 16 Functions $27.95

Topeak Mini 18 Plus Folding Tool18 tools fold into a forged and anodized alloy body. 2-10mm hex wrenches, T25, Flat and #1 Philips screwdrivers, spoke wrench, bottle opener, chain tools. Durable construction, neoprene case included.


136629 182g 18 Functions $32.95

Topeak Mini 20 Pro Tool w/ BagThe Mini 20 Pro is a precision built, 20-function mini-tool designed to handle any road or trailside repair. The lightweight, high-strength forged alloy body resists torque during hard use and its pro-quality hardened steel tools will provide years of service. T10 and T25 Torx bits simplify hydraulic disc brake work. An integrated, cast CrMo chain tool nestles and locks between the tool body forming a low profile, snag-proof shape. The perfect tool for endurance racing, training and touring.


157281 151g 20 Functions Silver $39.95

Topeak Mini 9 Folding Tool9 tools fold into a forged and anodized alloy body. 2-8mm hex wrenches, T25 and #1 Philips screwdriver. Durable construction, neoprene case included.


132856 92g 9 Functions $16.95

Topeak Mini 9 Pro Tool w/ BagThe Mini 9 Pro features 9 precision tools folded into a sleek, machined body. The rigid, high-strength forged alloy body resists torque during hard use and its pro-quality hardened steel tools are built to last. An integrated, folding tire lever secures inside tool body for a streamlined profile. The small size hides in a jersey pocket or saddle bag and is the minimal repair solution for long road rides or endur-ance mountain biking.


157282 73g 9 Functions Silver $24.95

Topeak X-Tool Multi-ToolIncludes: 2, 2.5, 3, 4 - 2 pieces, 5, 6, 8mm Allen wrenches. A T25 Torx, Philips screw driver, w/ a detachable 4/2.5mm hex key for two-handed repairs.


158911 115g 10 functions Silver $12.95

XLC 10-Piece Multi-ToolContains: Screwdriver cross. Screwdriver slot. Hexagon opening 2/2.5/3/4/5/6/8 mm. Torx T 25.

SKU MSRP

143546 $20.00

145349 Hexus II Multi-Tool

136629 Mini 18 Plus Folding Tool

132856 Mini 9 Folding Tool

143546 10-Piece Multi-Tool

Tools


Tools - Multi-Tools

XLC 19-Piece Multi-ToolContains: Screwdriver cross. Screwdriver slot. Hexagon opening 2/2.5/3/4/5/6/8 mm. Tin opener. 8/9/10 mm box wrench. Spoke wrench. Tire lever. Torx T 25. Chain rivet remover.

SKU Spec's MSRP

143545 19 Functions $22.00

XLC 8-Piece Multi-ToolEight tool in one compact, lightweight, strong folding tool. Includes: 2, 3, 4, 5, 6mm hex wrenches; Philips & Flathead screwdrivers & a T25 Torx bit. 2" long, 1" wide, 1/4" thick. 79g.

SKU Spec's MSRP

157130 8 Functions $17.00

XLC Micro Trail 11 Folding Tool11 tools in 1 compact folding tool. Includes: 2, 2.5, 3, 4, 5, 6, & 8mm Hex wrenches; Philips and Flathead screwdrivers and 14g/15g spoke wrenches.

SKU Spec's MSRP

157128 11 Functions $23.00

XLC Wood Tech 10 Multi-ToolWood finished tool. Includes: 2; 2.5; 3; 4; 5; 6; 8mm hex key wrenches. Philips and flathead screwdrivers, T-25 Torx.


156705 10 Functions Stained Wood $22.00

XLC Wood Tech 11 Multi-ToolWood finished tool. Includes: 2; 2.5; 3; 4; 5; 6; 8mm hex key wrenches. Philips and flathead screwdrivers, T-25 Torx, and a chaintool.



XLC Wood Tech 8 Multi-ToolWood finished tool. Includes: 2; 2.5; 3; 4; 5; 6mm hex key wrenches. Philips and flathead screwdrivers.



Tools - Other Tools

Park 50th Anniversary Pint GlassFeaturing a three-color Park Tool logo, the PNT-50 pint glass is made from heavyweight, dishwasher safe glass.


158222 PNT-50 Pint $7.49

143545 19-Piece Multi-Tool

157128 Micro Trail 11 Folding Tool

156705 Wood Tech 10 Multi-Tool



158222 50th Anniversary Pint Glass

Tools

631800-283-2453

Tools - Other Tools

Park BO-2C Bottle OpenerSKU Model No. MSRP

135373 BO-2C $6.95

Park BO-3 Compact Bottle OpenerA compact opener featuring Park's world famous Blue handle and a 10mm wrench. Fits perfectly on a keychain or in a pocket or wedge pack.

SKU Model No. MSRP

159288 BO-3 $5.95

Park BO-5 Wall Mount Bottle OpenerLooks like a bottle cage. Attaches to any wall. Includes a water bottle style cap catcher.

SKU Model No. MSRP

148043 BO-5 $19.95

Park HMR-4 Shop HammerFiberglass shaft, a soft touch rubber grip, and a two-sided head—steel on one side and a replaceable plastic head (part #293) on the other side. Weighs 2 pounds.

SKU Model No. MSRP

146297 HMR-4 $20.95

Park MB-1 Magnetic BowlThis bench top accessory keeps small parts accessible and all in one place. 6" (15cm) in diameter and featuring an extra strong magnet, the MB-1 is available only in World Famous Park Tool Blue.

SKU Model No. MSRP

134538 MB-1 $7.95

Park NP-6 Needle Nose Pliers6" needle nose pliers ith 5 different crimping/grasping areas and a cutting blade. Forged, heat-treated cro-moly steel w/ an invisible spring and soft touch dual density grips.

SKU Model No. MSRP

148046 NP-6 $24.95

Park Park BX-2 Blue Box Tool CaseAluminum frame. Removable tool boards. Front hanging boards. Key and combo locks. 39 tool pockets. Straps and modules to accommodate a wide variety of tools. Uses a super tough HDPE plastic shell.


151559 BX-2 Blue $249.95

135373 BO-2C Bottle Opener

148043 BO-5 Wall Mount Bottle Opener

146297 HMR-4 Shop Hammer

134538 MB-1 Magnetic Bowl

148046 NP-6 Needle Nose Pliers

151559 Park BX-2 Blue Box Tool Case

Tools


Tools - Other Tools

Park Park BXB-2 Backpack Harness for BX-2 and BX-1Padded shoulders. Fully adjustable accessory pouches. Waist and chest straps. This harness works for both the BX-2 and BX-1 tool cases.

SKU MSRP

151560 $99.95

Park PZT-2 Pizza CutterUpdated version. PZT-2 is sharper and bigger to even handle those huge 29er pizza’s!

SKU Model No. MSRP

140346 PZT-2 $15.95

Park RP-1 .9mm Straight Internal Snap Ring PliersDesgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-1 is a forged pliers w/ .9mm Straight Internal snap ring tips.

SKU Model No. MSRP

159294 RP-1

Park RP-2 1.3mm Bent Internal Snap Ring PliersDesgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-2 is a forged pliers w/ 1.3mm Bent Internal snap ring tips.

SKU Model No. MSRP

159295 RP-2

Park RP-3 1.3mm Bent External Snap Ring PliersDesgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-3 is a forged pliers w/ 1.3mm Bent External snap ring tips.

SKU Model No. MSRP

159296 RP-3

Park RP-4 1.7mm Bent Internal Snap Ring PliersDesgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-4 is a forged pliers w/ 1.7mm Bent Internal snap ring tips.

SKU Model No. MSRP

159297 RP-4

Park RR-12C Tape MeasureSmall and handy, the RR-12 features a tough, composite housing and both Metric and English readings up to 12 feet (3.65m).

SKU Model No. MSRP

134532 RR-12C $5.95

151560 Park BXB-2 Backpack Harness for BX-2 and BX-1

140346 PZT-2 Pizza Cutter

134532 RR-12C Tape Measure

Tools

633800-283-2453

Tools - Other Tools

Park SD Screwdriver SeriesShop quality screwdrivers designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.


134533 SD-0 Phillips 1/8" $4.95134534 SD-2 Phillips 1/4" $5.95139560 SD-3 Flat 3mm $4.95134535 SD-6 Flat Blade 6mm $5.95

Park Shop Screw Driver SetShop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts. The SD-SET includes all four of Park's shop grade screwdrivers in one handy set: SD-0; SD-2; SD-3, & SD-6.


158224 SD-SET 4 pieces $18.95

Park Snap Ring Pliers SetDesgined and built w/ the specific needs of the bike shop mechanic in mind, the RP-Set features three forged plierrs made for internal snap rings and one for external snap rings. Full set covers service needs on suspension forks to hydraulic brake levers, and anything in-between. Set includes: RP-1 .9mm Straight Internal; RP-2 1.3mm Bent Internal; RP-3 1.3mm Bent External, and RP-4 1.7mm Bent Internal Pliers.

SKU Model No. MSRP

159293 RP-Set $86.95

Park SP-7 Side Cutter PliersProfessional quality 7" diagonal/side cutting pliers w/ soft touch dual density grips. Made from forged, heat-treated, Cro-Moly steel.

SKU Model No. MSRP

149196 SP-7 $25.95

Park Stainless Steel SporkIt's a spoon, it's a fork, it's the take along multi-tool of the tableware world. Ideal for any Park Tool fan that also eats. Makes the perfect gift! Made of 316 food grade stainless steel and vinyl dipped in world famous Park Tool Blue. Dishwasher safe.


158813 SPK-1 Blue $7.49

Park Thru Axle AdaptorThe TS-TA makes it possible to adapt all Park Tool Truing Stands to work w/ 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels. The TS-TA also work w/ the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15 or TS-5 will work w/ all rear thru axle hubs. For thru axle hubs greater than 135 (142, 150, 157, etc) in the TS-2.2, use the TS-2TA Thru Axle Adaptors.

SKU Model No. MSRP

158226 TS-TA $60.95

134533 SD Screwdriver Series

149196 SP-7 Side Cutter Pliers

158813 Stainless Steel Spork

Tools


Tools - Other Tools

Park TS-2TA Thru Axle AdaptorsAllows truing stand to be used w/ 12mm, 15mm, 20mm and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2, TS-2 or TS-8 Truing Stands.

SKU MSRP

145088 $19.29

Park TW-5 Small Torque WrenchThe TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component’s threaded fastener(s). Comes w/ its own protective case.• Ratcheting 1/4" drive w/ 3/8" adaptor• Dial-adjust system allows desired torque setting to be preset.• 3-15 Newton Meter range (26-132 Inch Pounds)• Adjustable to 0.4 Nm increments. Conversion scale on tool body

SKU MSRP

154242 $115.95

Park TW-6 Big Torque WrenchThe TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component’s threaded fastener(s). Comes w/ its own protective case.• Ratcheting 3/8" drive• Dial-adjust system allows desired torque setting to be preset• 10-60 Newton Meter range (88-530 Inch Pounds)• Adjustable to 0.2 Nm increments• 38cm (15") length

SKU MSRP

154243 $132.95

Park UK-1C Utility KnifeThe UK-1 is a combination of aluminum and stainless steel and uses readily available hardware store utility knife blades. It also features a secure, quick-change blade system that locks open and closed.

SKU Model No. MSRP

134539 UH-1C $13.95

Pedro’s Demi Torque WrenchPedro’s Micrometer style torque wrench is now available in a smaller, compact size to address the increasing use of carbon on smaller, more delicate parts. Perfect for stem and seat binder bolts. Adjustable from 3 – 15 Nm. Easy to use locking mechanism. 1/4 inch drive works w/ Pedro’s Bit Set. Two year warranty.

SKU MSRP

142723 $150.00

Pedro’s Pro Torque Wrench 2.0Pro Torque Wrench 2.0 is a Micrometer-style torque wrench makes an audible “click” when desired torque is reached. Adjustable from 6–30 Nm. and accurate to w/in +/- 4 percent. Easy to use locking mechanism. Quarter-inch drive, heat-treated construction for durability. Two year warranty.

SKU MSRP

138902 $145.00

145088 TS-2TA Thru Axle Adaptors

154242 TW-5 Small Torque Wrench

154243 TW-6 Big Torque Wrench

134539 UK-1C Utility Knife

142723 Demi Torque Wrench

138902 Pro Torque Wrench 2.0

Tools

635800-283-2453

Tools - Pedal Tools

Pedro’s Pro Torque Wrench Hex Bit SetHex Bit Set - Designed for use w/ both the Pro Torque Wrench 2.0 and the Demi Torque Wrench. Includes Quarter-inch socket adapter and features 2, 2.5, 3, 4, 5, 6, & 8mm hex bits & T25 bit. Lifetime warranty.

SKU MSRP

138903 $15.00

XLC Torque Wrench SetHelps prevent over-tightening of components that can cause stripping or breakage leading to failures. Sets in Newton Meters (nm) • Includes: 1/4" drive Torque wrench • 2, 2.5, 3, 4, 5, 6mm hex and T25 Torx sockets • Storage case • Conversion chart for inch pounds, foot pounds to Newton meters.

SKU MSRP

157126 $140.00

Tools - Pedal Tools

Ergon TP1 Pedal Cleat ToolThe Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective. The tool is complimented by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1.

SKU Model No. MSRP

159637 Shimano SPD $19.95159638 Shimano SPD SL $19.95159639 Look Keo $19.95159640 Crankbrothers $19.95159641 Speedplay $19.95

Park DP-1 Dummy PedalInstalls quickly to take the place of a pedal when making adjustments during the assembly a new bike.

SKU Model No. MSRP

148045 DP-1 $9.95

Park DP-2 Threaded Dummy PedalThe DP-2 takes the place of a pedal when making adjustments during bike assembly. The DP-2 is similar to the DP-1, but the DP-2 is threaded for a more positive engagement w/ the threads of the crank arm.

SKU Model No. MSRP

159290 DP-2 $12.95

Park HCW-16 Chain Whip And Pedal WrenchThe double-ended HCW-16 combines a chain whip and a 15mm pedal wrench.

SKU Model No MSRP

130954 HCW-16 $22.49

138903 Pro Torque Wrench Hex Bit Set

157126 Torque Wrench Set

148045 DP-1 Dummy Pedal

130954 HCW-16 Chain Whip And Pedal Wrench

Tools


Tools - Pedal Tools

Park HCW-6 Head & Pedal WrenchPedal wrench fits all 9/16" pedals, and headset wrench fits 1" threaded headsets. Size 15mm/32mm.

SKU Model No MSRP

109918 HCW-6 $15.59

Park PW-3 Pedal WrenchReinforced flats and round, vinyl coated handle. 15mm / 9/16" wrench.

SKU Model No MSRP

103864 PW-3 $27.95

Park PW-4 Professional Pedal WrenchOpenings at 30° & 45° angle, 14" long handle, round vinyl dipped handle. 15mm wrench.

SKU Model No. MSRP

125363 PW-4 $35.95

Park PW-5 Home Mechanic Pedal WrenchMade from heat-treated spring steel and vinyl dipped for comfort. 11" (29 cm) long

SKU Model No. MSRP

134515 PW-5 $11.95

Pedro’s Hex Pedal WrenchUse these long Allen wrenches to install and remove pedals w/o 15mm flats. Large, comfortable handle, perfect length to provide excellent leverage

SKU Size MSRP

130811 6mm $13.00130812 8mm $15.00

XLC 15mm Pedal Wrech and Bottle Opener15mm open end wrench w/cushioned handle fits pedals and axle nuts. Bottle opener is on the opposite end.

SKU MSRP

157136 $19.00

XLC Pedal Wrench10" no slip black handle.

SKU Size MSRP

143497 15mm $17.00

XLC Pedal Wrench 15mm and 14/15mm Box WrenchMulti purpose wrench. Vinyl handle.

SKU MSRP

143498 $20.00

109918 HCW-6 Head & Pedal Wrench

103864 PW-3 Pedal Wrench

125363 PW-4 Professional Pedal Wrench

134515 PW-5 Home Mechanic Pedal Wrench

130811 Hex Pedal Wrench

143497 Pedal Wrench

143498 Pedal Wrench 15mm and 14/15mm Box Wrench

Tools

637800-283-2453

Tools - Spoke Tools

Tools - Spoke Tools

Park Adjustable Spoke WrenchThe SW-10 Adjustable Spoke Wrench helps remove tight, stubborn or rounded nipples. Hardened, nickel plated and investment casting gives superior strength and durability for those tough wheel re-pairs. Fits any of the 80 gauge sizes listed for SW-0 through SW-2: .127" (3.23mm) nipple; .130" (3.30mm) nipple; .136" (3.45mm) nipple.

SKU Model No. MSRP

158225 SW-10 $44.95

Park Bladed Spoke HolderThe BSH-4 is a valuable wheel building and truing aid that securely holds bladed spokes to prevent twisting. Four different sized slots to fit a wide variety of bladed spokes. Will hold blades from 0.8mm to over 2mm width.

SKU Model No. MSRP

158219 BSH-4 $8.95

Park Internal Nipple WrenchExtra long (3.25"/ 8.5cm) spoke wrench socket. Ergonomically-designed screwdriver handle.

SKU Model No. Size Spec's MSRP

145094 SW-16 3.2mm Square Socket $10.95148047 SW-16.3 3/16" Hex Socket $10.95

Park ND-1 Nipple DriverThe ND-1 is a time saver for wheel builders. Designed to quickly and easily drive conventional nipples on spokes w/ rims up to 50mm deep. Built w/ a comfortable, dual density grip and lined w/ precision bronze bearings to ensure a long, smooth running life.

SKU Model No. MSRP

159292 ND-1 $21.95

Park SBC-1 Spoke Gauge & RulerUse to measure spokes in inches and centimeters, plus ball bearing sizes and cotter pins. Anodized aluminum with embossed markings.

SKU Model No MSRP

109941 SBC-1 $7.95

Park SW Four Sided Spoke WrenchesUnique four-sided design provides extra strength and support and helps prevent slipping and deforma-tion of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches. The SW-40 is the same 3.23mm (0.127") size as the SW-0 (black).The SW-42 is the same 3.45mm (0.136") size as the SW-2 (red).


134520 SW-40C Black $7.95134522 SW-42C Red $7.95

145094 Internal Nipple Wrench

109941 SBC-1 Spoke Gauge & Ruler

134520 SW Four Sided Spoke Wrenches

Tools


Tools - Spoke Tools

Park SW Spoke WrenchesProfessional quality, precision-sized spoke wrenches are hardened and chrome plated for long service.

SKU Model no Size Spec's MSRP

109942 SW-OC .127" 80 gauge/black $7.49109943 SW-1C .13" 80 gauge/green $7.49109944 SW-2C .136" 80 gauge/red $7.49109945 SW-3C .156" 105 gauge/blue $9.29

Park SW-12C Mavic Spoke WrenchComfortable, vinyl dipped, double-ended spoke wrench for select Mavic wheels using the integrated M7 nipples. Smaller end fits 7-spline nipples w/ a 6.4mm outside spline diameter. These are found on the R-sys wheels. The larger end fits the 6-splines of the 9mm OD of the threaded eyelets of the "FORE drilled rim adapters" found on rims such as the Mavic XM819, EX823 and Speedcity wheels.

SKU Model No. MSRP

151532 SW-13C $12.29

Park SW-13C Mavic Spoke WrenchComfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings. Fits both Mavic 9mm threaded eyelets and 7mm integrated nipples.

SKU Model No. MSRP

134525 SW-13C $12.29

Park SW-14.5 Shimano Spoke WrenchThe two-sided SW-14.5 features 4.3mm and 3.5mm openings to fit Shimano Wheel System nipples.

SKU Model No. MSRP

159298 SW-14.5 $11.95

Park SW-14C Shimano Spoke WrenchThe two-sided SW-14 features 4.3mm and 4.4mm openings to fit Shimano Wheel System nipples.

SKU Model No. MSRP

134526 SW-14C $12.29

Park SW-15C Three-Way Internal Nipple WrenchCombines innovative 3-way Y wrench w/ w/ a square socket and 5mm and 5.5mm hex sockets to fit internal spoke nipples.

SKU Model No. MSRP

140357 SW-15C $14.49

Park SW-5C Spoke WrenchWorks on DT Torx style splined nipples.

SKU Model No. MSRP

151530 SW-5C $7.49

Park SW-7C Multi Spoke WrenchFits the three most popular nipple sizes.

SKU Model No MSRP

102420 SW-7 $9.49

109942 SW Spoke Wrenches 151532 SW-12C Mavic Spoke Wrench

134525 SW-13C Mavic Spoke Wrench

134526 SW-14C Shimano Spoke Wrench

140357 SW-15C Three-Way Internal Nipple Wrench

151530 SW-5C Spoke Wrench

102420 SW-7C Multi Spoke Wrench

Tools

639800-283-2453

Tools - Tire & Tube Tools

Park TM-1 Spoke Tension MeterThe TM-1 Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel.

SKU Model No. MSRP

128972 TM-1 $74.95

Park WAG-4 Wheel Alignment GaugeScrew-operated indicator will not move when set. Works on front and rear wheels, from 16" to 29", w/ or w/o the tire on.

SKU Model No. MSRP

128109 WAG-4 $54.95

XLC O Type Spoke WrenchHeavy duty round wrench includes all popular gauges.

SKU MSRP

143536 $7.00

XLC Pro Spoke Wrench Set of 3Red/Black/Green vinyl coated handles. .127", .130" and .136".

SKU Size Color MSRP

156707 .127", .130", .136" Red / Black / Green $20.00


Crank Brothers Speedier Lever TirePolycarbonate tire lever.


156224 144mm 26g $7.00159819 Bulk Pack of 24159818 Display box w/ 24 Levers

Kool Stop Sport Tire Levers Three piece set in a compact carrying case.

SKU MSRP

109876 $3.75

Kool Stop Tire Bead Jack LeverThe Kool Stop Tire Bead Jack is an articulated tool, w/ a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing w/ difficult tires.

SKU Color MSRP

159653 Black

128972 TM-1 Spoke Tension Meter

128109 WAG-4 Wheel Alignment Gauge

143536 O Type Spoke Wrench

156224 Speedier Lever Tire

109876 Sport Tire Levers

Tools



Park Shop Inflator INF-1Specially built for bicycles, the INF-1 utilizes a dual Presta and Schrader head that rotates making valve access quick and easy. The INF-1 features an ergonomic dual density grip, built in pressure gauge (0-160 psi, 0-11 bars), and accepts any 1⁄4" NPT (National Pipe Thread) male threaded fitting. Built for every-day shop use and rebuildable!

SKU MSRP

154128 $140.95

Park TB-2C Emergency Tire BootThe fastest, easiest, and most secure way to repair a cut or worn tire sidewall. TB-2 is produced using a strong, waterproof vinyl membrane w/ fiber weave reinforcement. A super strong pressure sensitive adhesive assures the boot stays in place in any tire, road or mountain, high or low pressure.

SKU Model No. MSRP

134519 TB-2C $3.49

Park TL-1 Tire Lever Set made of glass-injected nylon to ensure long life and damage-free operation.

SKU Model no Qty MSRP

138276 TL-1 25 Sets of 3/Box119862 TL-1C Each $2.95

Park TL-4C Tire Tool SetStrong enough to remove the toughest tires yet just the right size to stash.

SKU Model No. MSRP

140358 TL-4C $2.95

Park TL-5 Heavy Duty Steel Tire Lever SetThe TL-5 Heavy Duty Tire Lever Set is designed for use on the toughest tire and rim combinations. Made of forged steel, these beefy levers are a full 8" (20.3cm) long for superior leverage. Set of two.

SKU Model No. MSRP

128973 TL-5 $25.95

Park TL-6C Steel Core Tire Lever SetComposite covered steel core lever set. Provides smooth, scratch free operation and superior strength. 5.5"/ 14cm in length. Sold in pairs.

SKU Model No. MSRP

151537 TL-6C $16.95

Park VC-1 Valve Core ToolDesigned to remove SV and PV Cores and to install PV Extenders w/ 5mm wrench flats.

SKU Model No. MSRP

151539 VC-1 $10.95

154128 Shop Inflator INF-1

134519 TB-2C Emergency Tire Boot

119862 TL-1 Tire Lever Set

140358 TL-4C Tire Tool Set

128973 TL-5 Heavy Duty Steel Tire Lever Set

151537 TL-6C Steel Core Tire Lever Set

151539 VC-1 Valve Core Tool

Tools

641800-283-2453


Pedro’s Tire Lever Display PackDisplay box contains 24 two-piece tire lever sets.


137457 24 Pair Assorted $120.00131840 24 Pair Yellow $120.00

Pedro’s Tire LeversRefined composite formula resists breakage & bending. Ergonomic shape is easier to handle than standard levers. Snap together for easy storage.


126862 Pair Yellow $5.00

Planet Bike Pencil GaugeSKU Spec's Color MSRP

134971 10/Pkg Red/Black Anodized

Quik-Stik Tire LeverDesigned for non-high pressure tires.


111449 1/Card Yellow134995 36/Jar Assorted

SKS Digital Pressure GaugeDual swiveling head. backlit, oversized for an easy read. Reads in bar or psi. Reduction button allows pressure to be released one psi, or 1/10 a bar at a time.

SKU MSRP

142815 $24.99

Slime 4-Way Tire Valve ToolMulti-functional tire tool

SKU MSRP

128624

137457 Tire Lever Display Pack

126862 Tire Levers

134971 Pencil Gauge

134995 Tire Lever

142815 Digital Pressure Gauge

128624 4-Way Tire Valve Tool

Tools



Topeak SmartGauge D2 Digital Pressure GaugeThe SmartGauge D2 features the proven quality of Topeak's Smart-Head that automatically adjusts to fit Presta or Schrader vales. The D2 has added the ability to rotate the valve 180° to fit into tight wheels or shocks. Reads up to 250psi (17 bar) and now features a pressure release button.

SKU MSRP

145350 $34.95

XLC Dial Tire Gauge160 PSI gauge.

SKU MSRP

154147 $18.00

XLC Nylon Tire LeversConstructed of a blend of PC and ABS for extreme durability and toughness.

SKU Qty Color MSRP

143838 3/Pack Black $7.00157115 Box of 100 Black

XLC Pencil Tire GaugeSKU Color MSRP

154149 Silver $7.00

XLC Steel Core Tire LeversUnbreakable steel core, nylon coated tire levers w/chamfered tips and spoke holders.

SKU Qty Color MSRP

157118 3/Card Black $13.00157116 Box of 50 Black

XLC Steel Tire Lever 2 PackSKU Color MSRP

154136 Silver $23.00

Tools - Tool Kits

Park AK-38 Advanced Tool Kit• 37 tools in all • Includes: AWS-1, AWS-3, BBT-5, BBT-9, BBT-22, CC-3, CWP-6, CCW-5, CBW-1, CBW-4, CL-1, CM-5, CN-10, CNW-2, CT-3, FR-5, GP-2, GSC-1, PPL-1, PW-3, SCW-13 , SCW-14, SCW-15, SCW-16, SCW-17, SCW-18, SCW-19, SD-0, SD-2, SD-6, SR-1 SW-0, SW-1, SW-2, TB-2, TL-1.

SKU Model No. MSRP

157293 AK-38 $319.95

145350 SmartGauge D2 Digital Pressure Gauge

154147 Dial Tire Gauge

143838 Nylon Tire Levers

154149 Pencil Tire Gauge

157118 Steel Core Tire Levers

154136 Steel Tire Lever 2 Pack

157293 AK-38 Advanced Tool Kit

Tools

643800-283-2453

Tools - Tool Kits

Park BTR-1 Essential Tool Roll Kit• Nylon tool roll w/ cinch strap• PMP-3 Pocket Protector Micro Pump• IB-1 I-Beam Fold-up tool set• GP-2 Pre-Glued Patch Kit • TL-4 Tire Lever Set• TB-2 Emergency Tire Boot• High pressure inflation gauge

SKU Model No. MSRP

142543 BTR-1 $59.49

Park EK-1 Professional Travel and Event KitAWS-1, AWS-3, AWS-10, BBT-5/FR-11,BBT-22,BBT-9,BO-2,CC-23,CCW-5,CNW-2,CN-10,CWP-7,CT-4.2,FR-5,GSC-1,HCW-15,HT-8,HT-10,HMR-2,MLP-1,MW-8,MW-9,MW-10,PAW-12,PW-4,RR-12,SCW-SET,SD-0,SD-2,SD-3,SD-6,SD-6,SR-1,SW-0,SW-1,SW-2,TL-4,TWS-2,UK-1. Box measures 19"x15"x7"

SKU Model No. MSRP

145091 EK-1 $689.95

Park MK-222 Master Tool Kit*Designed for the professional full service mechanic, the MK-222 is a complete set of professional level tools, fixtures, lubricants, gauges, and accessories The perfect way to start a repair business, open or expand a bike shop, or create the ultimate home workshop (Replaces the MK-218 as of January 2013). * Drop ship only

SKU Notes MSRP

155816 Drop Ship Only! $6995.95

Park PK-65 Professional Tool KitDesigned for the serious home mechanic or as a solid starter kit for the professional, the PK-65 is a col-lection of Park's finest shop tools. While it includes the tools needed to perform almost any basic repair or adjustment, the PK-65 also includes the specialty tools to perform many advanced repair tasks, such as installing and removing headset races, crown races, cutting fork steerer tubes, straightening derailleur hangers, tapping threaded frame braze-ons, dishing wheels, and more.

SKU Spec's MSRP

157294 65 piece kit w/case $989.95

Park SBS-1 Socket and Bit SetThe SBS-1 is a shop quality set of sockets, hex bits and Torx style bits for the bike mechanic. Ideal for use w/ Park Tool Torque Wrenches, the SBS-1's 3/8" drive bits and sockets are made from tough, chrome vanadium steel for long life. Includes: 3, 4, 5, 6, 8, 10mm hex bits, T25, T30 and T40 Torx style bits. 8, 9, 10, 11, 12, 13, 14, 15mm and 1" sockets (The 1" socket fits various Park Tool freewheel, cassette lockring, and bottom bracket tools.

SKU Model No. MSRP

142520 SBS-1 $39.49

Park SK-1 Home Mechanic Starter Tool KitGreat way top start a tool collection. Kit includes; AWS-1, CCW-5, CM-5, GSC-1, PW-5, SD-2, SD-3, SW-7, TLi1 and VP-1. Comes in a nice size tool box with plenty of room for more tools.

SKU Model No. MSRP

140350 SK-1 $108.95

142543 BTR-1 Essential Tool Roll Kit

145091 EK-1 Professional Travel and Event Kit

155816 MK-222 Master Tool Kit

157294 PK-65 Professional Tool Kit

142520 SBS-1 Socket and Bit Set

140350 SK-1 Home Mechanic Starter Tool Kit

Tools


Tools - Tool Kits

Park WTK-1C Essential Tool KitWTK-1C contains tools needed for basic adjustments and repairs. Includes 3, 4, 5, 6mm hex wrenches; tire levers; patch kit; straight blade screwdriver; and small adjustable wrench, in a small tool wallet. Packaged carded.

SKU Model No. MSRP

130943 WTK-1C $25.95

XLC 33-Piece Tool KitT25, T30; 5mm & 7mm Flat driver; 2 Phillips screwdrivers. Socket wrench coupling. 8/9/10mm sockets w/ L-grip. 3 nylon tire levers / 1 tire repair kit. Crank puller. Chain tool. Hex wrench set w/ ball driver 2/2.2/3/4/5/6/8/10 mm. 15mm Pedal wrench w/ 24mm inset wrench. Hollow Tech II Crank arm tightner. Double ended Wrenches: 13/14, 15/16, 30/32 and 36/4mm. Chain Whip. 8/10mm box wrench. Lockring remover w/ pin. O-spoke wrench. Isis compatible 22 tooth bb cup remover. Outboard BB cup wrench.

SKU Color MSRP

143156 Black Box $120.00

XLC Roll-Up Tool KitEconomical starter or take along tool kit. Includes; universal spoke wrench, chain tool, tire levers, glueless patch kit, folding tool 2-8mm hex wrenches, 8,9 and 10mm box wrench socket attachments; 13/14mm concave wrench and 15/16mm cone wrench in a Roll-Up pouch.

SKU MSRP

156703 $34.00

Tools - Wrenches

Park CBW Wrench SeriesOpen end wrench. This small, nickel-plated wrench can be used on brakes, derailleurs, etc. Hole in wrench allows easy hanging on peg board.


109889 CBW-1C 8/10mm Open $5.95109890 CBW-4C 9/11mm Open $5.95

Park HCW-15 Head WrenchLaser cut to ensure a tight, accurate fit. Size 32/36mm wrench.

SKU Model No MSRP

122693 HCW-15 $16.95

Park HCW-7 Head WrenchLaser cut to ensure a tight, accurate fit. Size 30/32mm.

SKU Model No MSRP

109919 HCW-7 $18.95

130943 WTK-1C Essential Tool Kit

143156 33-Piece Tool Kit

156703 Roll-Up Tool Kit

109889 CBW Wrench Series

122693 HCW-15 Head Wrench


Tools

645800-283-2453

Tools - Wrenches

Park HCW-9 Head WrenchLaser cut to ensure a tight, accurate fit. Size 36/40mm.

SKU Model No MSRP

116994 HCW-9 $16.95

Park MQ-1 Metric Quad WrenchThe MQ-1 is a four-way socket wrench w/ 10.25" handles for leverage. Features forged 15, 17 & 19mm sockets and a 3/8" socket. Great for axle nuts, installing axle pegs and for use w/ bottom bracket tools...plus many other uses.

SKU Model No. MSRP

159291 MQ-1 $19.95

Park MW-Set.2 Metric Wrench SetIncludes 6mm to 17mm 12 point box/open end wrenches. Forged from chrome vanadium steel, meticulously polished then center dipped in Park Tool blue for a positive grip.

SKU Model No. MSRP

151548 MW-Set.2 $79.95

Park PAW-12 Adjustable Wrench 12"The PAW-12 is forged from chrome vanadium steel, precision ground and machined, then heat-treated and nickel-plated. It opens to 38mm and has a laser engraved measuring scale. Dipped in Park Tool Blue vinyl.

SKU Model No. MSRP

147282 PAW-12 $33.95

Park ST-3C Three Way “Y” Socket Wrench8mm, 9mm and 10mm on a “Y” wrench.

SKU Model No. MSRP

140353 ST-3C $14.95

Pedro’s TrixieSpecifically designed for the fixed gear rider, the Pedro’s Trixie is the urban survival tool w/ all the right pieces to keep that fixie rolling. Hardened tool steel gives this tool a great feel and long lasting life. Features: 15mm box end wrench, lock ring hook, 8,9,10mm box end wrenches, 5mm hex, a bottle opener (of course). Includes galvanized wing nuts to mount to water bottle bosses.

SKU MSRP

142724

XLC 14/15/24mm Pedal and Multi WrenchCromoly shaft. Black handle.

SKU Size MSRP

143500 14/15/24mm $22.00


151548 MW-Set.2 Metric Wrench Set

147282 PAW-12 Adjustable Wrench 12”

140353 ST-3C Three Way “Y” Socket Wrench

142724 Trixie

143500 14/15/24mm Pedal and Multi Wrench

Tools


Tools - Wrenches

XLC 6" Adjustable Steel WrenchMade from Drop-Forged Steel. Opens to 21mm, w/mm markings on the jaw.

SKU MSRP

156708 $15.00

XLC Ratchet and Open End WrenchChrome Vanadium.

SKU Size Color MSRP

143537 8mm Chrome $22.00143539 13mm Chrome $27.00143540 15mm Chrome $20.00

143537 Ratchet and Open End Wrench

2014 SBS Big Bike Book: Tools

Documents

Transcript of 2014 SBS Big Bike Book: Tools