2014 HBA Product Catalog

Innovative. Integrated. Simple.

Product catalog

Energy Saving lighting controls

VacaNcY & occuPaNcY SENSorS

daYlIgHtINg coNtrolS

lIgHtINg coNtrol PaNElS

WIrElESS lIgHtINg coNtrolS

EMErgENcY lIgHtINg coNtrolS

® Registered trademarks of Hubbell Building Automation, Inc. (HBA), MYTECH Corporation and Unenco. TM Trademarks of Hubbell Building Automation, Inc. LightOWL, LightHAWK, The OMNI, wiSTAR, Daylight Tracker, IntelliDAPT, HBA WASP2, wiHUBB, Zone5, and CX are registered trademarks of Hubbell Building Automation, Inc.

Other product and company names mentioned herein may be the trademarks of their respective owners.

Printed in the United States of America. ©Copyright 2014, Hubbell Building Automation, Inc.

Hubbell Building Automation, Inc. products are protected under the following United States of American Patents: 6,222,191; 439,853; 435,798; 430,056; 430,055; 6,078,253; 5,986,357; 404,326; 404,325; 401,175; and 5,640,143.

Specifications Subject to Change Without Notification.

Product photography throughout the Hubbell Building Automation product catalog, by Jesse Knish Photography – Austin, Texas USA.

tablE of coNtENtS

Hubbell building automation

Hubbell Building Automation

HBA Energy Conservation

Support, Service and Quotes

Vacancy & occupancy Sensors

LightHAWK2TM

OMNITM

OMNI-BPTM

LightOWLTM

IWSZP Sensors

TD300 Timer

Low Voltage Switches

HBA Tracker

Power Packs and Relays

Accessories

Indoor/outdoor Sensors

WASP2TM

Dimming WASPTM

WASP Lens Options

daylighting controls

ZONE5TM

DLC Controls

Luxstat

lighting control Panels

LX Networked Lighting Controls

CX Commercial Lighting Controls

Wireless lighting controls

wiHUBB®

wiSTARTM

wiSCAPETM

Emergency lighting controls

4-7

4

6

7

8-65

10-19

20-27

28-35

36-41

42-45

46-47

48

49

50-56

57

58-65

59-61

62-64

65

65-97

66-77

78-83

84-97

98-151

100-137

138-151

152-211

153-174

175-189

190-211

212-219

go to specific section by clicking on the product category.

Hubbell Building Automation is the leading developer of groundbreaking technologies

in wireless lighting controls, LED and fluorescent controls, occupancy|vacancy sensors

and lighting control panels. With over 30 years of lighting control experience, HBA

provides complete energy-saving solutions. All HBA products come with a five-year

limited warranty.

Hubbell building automation

PagE 4

(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 5

a NaME You caN truSt – HubbEll

INNoVatIVE VacaNcY/occuPaNcY SENSorS

Traditional vacancy and occupancy sensors need

adjustments throughout the year as seasons change, when

airflow is modified, or if furniture layout or occupancy

patterns change. When these sensors are not constantly

monitored and adjusted, energy savings objectives are not

met.

In response to this need, HBA introduced the industry’s

first self-adapting sensor. HBA’s patented IntelliDAPT®

technology is the key to maximizing energy savings—

from open offices to the manufacturing floor, digital

microprocessor technology makes all sensor adjustment

decisions. Smart software monitors the controlled area

and makes sensitivity and timer adjustments automatically.

Vacancy and occupancy sensors with IntelliDAPT provide

maintenance-free “install-and-forget” operations.

INtEgratEd NEtWorkEd lIgHtINg coNtrolS

Hubbell Building Automation’s innovative CX Commercial

Lighting Control Panel offers expanded programming

options to increase energy conservation, and can save

up to 50% in labor and materials when used in place of

conventional time clock and contactor combinations.

The LX Series Lighting Control Panels deliver networked

lighting controls with rich functionality, an easy-to-use

graphical user interface for local and remote system

management, and unmatched integration support for other

building systems and network protocols.

WIrElESS lIgHtINg coNtrolS

Hubbell Building Automation proudly offers wiHUBB®,

wiSTARTM and wiSCAPETM indoor and outdoor wireless

lighting controls. While installation of wired systems is often

complicated and costly, Hubbell Building Automation’s

wireless lighting controls feature a future-proof design

including a self-healing wireless mesh network. Many

wireless-enabled fixtures are available through our family of

quality brands under the umbrella of Hubbell Lighting.

Wireless lighting controls allow for individual fixture control

without needing to know how the circuit is wired or having

to pull control wires to each fixture location.

Hubbell Building Automation, a subsidiary of Hubbell Incorporated (A Delaware

Corporation), manufactures a complete suite of energy-saving lighting control solutions.

Founded in 1888 by Harvey Hubbell II, Hubbell Inc. has been a long-time contributor to new product design and

manufacturing innovation. In 1896, Hubbell invented the world’s first lighting control device: the pull chain switch.

More than 100 years later, Hubbell Building Automation (HBA), headquartered in Austin, Texas, continues a

tradition of innovation with the development of a vast array of energy-saving lighting controls.

hubbell-automation.com

Hubbell Building Automation offers a broad range of vacancy and occupancy sensors and lighting

controls that meet the latest energy efficiency codes and standards.

ENErgY coNSErVatIoN

Energy conservation has become a significant global movement,

with nations, states, and local municipalities creating new codes

and standards of efficiency for both commercial and residential

buildings. These codes and standards include:

• LEED® (Leadership in Energy and Environmental Design) certification in new and renovated facilities through the U.S. Green Building Council (USGBC) promotes sustainable building design.

• California Energy Commission’s (CEC) Title 24 program enforces stringent standards and regulations to reduce energy consumption, including automatic lighting control and shut-off .

• ASHRAE/IESNA 90.1 energy efficiency code requires interior lighting in all buildings to be controlled with automatic devices.

• IECC® (International Energy Conservation Code) compliance requires automatic shut-off of lighting which is

now adopted by most states in some form.

As energy concerns increase, the “greening” of commercial and

residential buildings will continue through stringent standards

and energy conservation initiatives like the EPA’s ENERGY STAR

program, or the 2030 Challenge which aims to reduce energy

use by 50% before 2030.

Hba lIgHtINg coNtrolS PlaY a kEY rolE

In the U.S., lighting consumes 22% of electricity and represents

$40 billion a year in energy costs. In a typical office building,

where lighting accounts for 35 to 45% of energy use, HBA Lighting

Controls have the potential to reduce wasted lighting by 13 to 90%

for a significant return on investment (ROI).

backEd bY Hba SErVIcE aNd SuPPort

HBA Occupancy Sensors are backed by Hubbell Building

Automation’s sustainability initiative and superior service with

support including:

• Valuable online ROI worksheet for calculating energy

savings

• Product selection guide for choosing the right HBA

Occupancy Sensor and technology

• Online specification assistance through AutoCAD

drawings, templates and documentation

• Comprehensive design assistance for deploying

vacancy/ occupancy sensors in a variety of applications

• Highly knowledgeable network of specification

professionals and trained, dedicated sales staff

• A commitment to safeguard the environment through

environmental stewardship, innovative products and

efficient operations

For more information about Hubbell Building Automation’s sustainability initiative and access to our complete suite of

online tools, visit our website at www.hubbell-automation.com.


Hubbell Building Automation provides thorough

answers to your questions and ensures the best

service.

SuPPort, SErVIcE aNd QuotatIoNS

HBA’s Service and Support groups are available daily from

8am to 5pm CST.

cuStoMEr SErVIcE

Get a personalized level of service:

• Detailed product knowledge

• Fast and accurate order entry

• Timely order acknowledgments

• Order management from initial ordering to shipping

tEcHNIcal SErVIcES

HBA’s technical services include quotations, factory-certified

occupancy sensor layouts, technical phone support, application

support, and technical documentation.

QuotatIoNS

HBA’s Quotations Group coordinates with the Technical

Services Group to provide detailed drawings and accurate

quotations, working with you to ensure all needs of your project

are fulfilled. Get detailed submittal packages, necessary

product documentation and project-specific information.

factorY-cErtIfIEd laYoutS

We guarantee the type and placement of each control on

every drawing. Send electronic AutoCAD files and we’ll create

a factory-certified, competitive layout with a detailed Bill of

Materials.

coNtact INforMatIoN

telephone — austin, tX uSa 512.450.1100

telephone — toll-free888.698.3242

fax — orders only512.450.0864

fax — general 512.450.1215

fax — toll-free customer Service 877.783.9201

corporate Websitehubbell-automation.com

technical drawing [email protected]

Vacancy & occupancy Sensors

PAgE 8

DUAL TECHNOLOgY

Dual technology sensors combine passive

infrared and ultrasonic technologies for

maximum reliability. Both technologies

must detect occupancy to activate lighting,

and only one technology is required to

keep lighting on. Dual technology sensors

are the best solution for most applications.

PASSIvE INfRARED TECHNOLOgY

Passive infrared sensors provide the best

solution for major motion detection. These

sensors use a specially designed lens to

divide the space into separate zones. When

a person crosses between these zones, the

sensor detects occupancy. Passive infrared

sensors are perfect for small, enclosed

spaces with frequent occupant movement.

ULTRASONIC TECHNOLOgY

Ultrasonic sensors provide the best solution

for detecting minor motion such as typing,

reading, and writing. These sensors emit a

safe, inaudible sound wave into the control

space. Minor movements cause frequency

shifts in the emitted waves which are detected

by the senor. Because ultrasonic sensors are

volumetric and do not require a clear line of

sight, they are ideal for hallways or restrooms

with stalls.

MOST RELIABLE MOTION SENSINg TECHNOLOgIES

A sensor is only as good as it’s proper use and placement. Different applications require different sensor technologies to provide

you with the best sensor coverage and performance. Hubbell Building Automation's motion sensors are available with the most

reliable indoor motion sensor technologies currently available: Passive Infrared (PIR), Ultrasonic (US), and Dual Technology.

Control Energy Costs

THE RIgHT TECHNOLOgY fOR THE RIgHT APPLICATION

IntelliDAPT® is HBA's patented self-adapting sensor technology that enables automatic sensitivity and timing adjustments for

true install-and-forget operation. IntelliDAPT technology comes standard in HBA’s OMNI, LightOWL and LightHAWK sensors

and switches. It works in conjunction with Passive Infrared, Ultrasonic and Dual technology to maximize energy savings.

PAgE 9(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com


LightHAWK2TM Dual Technology Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS

With a coverage area of up to 1,000 square feet and 180° of detection, the

LightHAWK2TM Dual Technology Wall Switch Sensor combines ultrasonic (US) and

passive infrared (PIR) technologies for unequaled motion detection. By far the

most versatile and widely used sensor in the LightHAWK2 product line, this sensor

can be used in a large number of applications,and won’t leave users waving their

hands in the dark.

LHMT sensors feature Hubbell Building Automation’s patented IntelliDAPTTM

technology, which makes all the sensor adjustment decisions automatically.

Throughout the product’s lifespan, smart software analyzes the controlled area

and makes digital adjustments to sensitivity and timer settings. Occupancy sensors

with IntelliDAPT provide a maintenance-free install-and-forget operation. With

selectable operating modes—auto on/off or manual on/auto off—and a built-

in photosensor for automatic daylight harvesting, LHMT sensors are the most

capable choice in today’s marketplace.

PRODUCT fEATURES

4.2”

1.8”

2.1”

Fits Standard Decorator Style Wallplate (sold separately)

RhinoTuffTM

Vandal Resistant Lens

On/Off Button

Ultrasonic Sensor

Galvanized Steel Mounting Strap

LHMTD2

LHMTS1

DAYLIGHTHARVESTING IntelliDAPT

OCCUPANCYSENSING

• Digital dual technology: (US) and (PIR) sensors

• IntelliDAPT self-adaptive technology—no manual adjustment required

• 1 or 2 relay models for single-level switching or bi-level switching

• Occupancy (auto-on) and Vacancy (manual-on) operating modes

• Available with or without Neutral

• 1,000 square-foot, 180° coverage area

• RhinoTuff™ vandal resistant lens

• Dual 120/277VAC operation

• No minimum load requirement

• Zero Arc Point Switching

• Five-year limited warranty

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE

347VAC

120277

VAC


general Specifications

IntelliDAPT Technology Self-adjusting timer Self-adjusting Ultrasonic (US) and passive infrared (PIR) sensitivity Automatic false-on/false-off corrections No manual adjustments required

Time Delay Auto mode: 4–30 minutes; self-adjusts based on occupancy Fixed mode: 4, 8, 15, and 30 minutes Test mode: 5 seconds

Ultrasonic (US) Output 40kHz output

Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical RhinoTuff lens

Photocell Natural light override range: 10–500 foot-candles

Coverage 1,000 square-foot, 180° coverage area

Power Requirements 120/277VAC; 50/60Hz 347VAC; 50/60Hz 24VDC (requires UVPP)

Electrical Ratings 120VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP 277VAC: 1,800W Fluorescent; 1/6 HP 347VAC; 1,500W Fluorescent; 1/6 HP

Minimum Load Requirements None

Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%

Construction Casing—high-impact injection-molded plastic (UL-94-5V) Impact-resistant lens Color-coded leads are 6” long Wrap-around galvanized steel mounting strap

Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extension

Weight 2.9 oz

Color White; Ivory; Light Almond; Gray; Black

Mounting Single-gang NEMA-style switch box (standard switch box) Decorator-style wall plate sold separately

Warranty Five-year limited

MODELlHMtS LightHAWK2™

Dual Technology Single Relay

lHMtd LightHAWK2™ Dual Technology Dual Relay

WIRINgg ground (120/277v)N Neutral (120/277v)

24V Low voltageg347 ground (347v)N347 Neutral (347v)

BUTTONS0

1*

2†

COLORWH WhiteIV Ivoryla Light AlmondgY graybk Black

NOTE: * Only available with LightHAWK2™ Dual Technology Single Relay. † Only available with LightHAWK2™ Dual Technology Dual Relay. - Wall switch plates are sold separately. - Low voltage sensors require a power pack that is sold separately. See wiring diagram on specification sheet.

ordering Information

MODEblank Switchable vacancy

or Occupancy ModeM vacancy Mode Only

dual load Wiring With NeutralSingle load Wiring Without Neutral


LightHAWK2TM Ultrasonic Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS

PRODUCT fEATURES

The LightHAWK2TM Ultrasonic Wall Switch Sensor uses ultrasonic (US) technology

for detecting minor movement in areas with line-of-sight obstacles such as cubicles

and stalls. Because ultrasonic technology is volumetric in nature, its coverage

pattern can adapt itself to fill oddly shaped spaces such as alcoves, recesses,

and nooks. This sensor has a coverage area of up to 400 square feet and 180° of

detection. This sensor includes HBA patented IntelliDAPT® technology.

LHUS sensors feature Hubbell Building Automation’s patented IntelliDAPTTM



and makes digital adjustments to sensitivity and timer settings. Occupancy

sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.

With selectable operating modes—automatic ON/OFF or manual ON/automatic

OFF—and a built-in photosensor for automatic daylight harvesting, the LHUS

sensors are the most capable choice in today’s market place.

• Digital Ultrasonic (US) sensor


• 1 or 2 relay models for single-level switching or bi-level switching control







• Five-year warranty

4.2”

1.8”

2.1”


On/Off Button


LHUSD2

Ultrasonic Sensor

LHUSS1


OCCUPANCYSENSING

Photo Cell/LED Indicator

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE

347VAC

120277

VAC


General Specifications

IntelliDAPT Technology Self-adjusting timer Self-adjusting ultrasonic (US) sensitivity Automatic false-on/false-off corrections No manual adjustments required


Ultrasonic (US) Output 40kHz output


Coverage 400 square-foot, 180° coverage area

Power Requirements 120/277VAC; 50/60Hz 347VAC; 50/60Hz 24VDC (requires UVPP)




Construction Casing—high-impact injection-molded plastic (UL-94-5V) Color-coded leads are 6” long Wrap-around galvanized steel mounting strap

Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extensionWeight 2.9 oz




NOTE: * Only available with LightHAWK2™ Ultrasonic Single Relay. † Only available with LightHAWK2™ Ultrasonic Dual Relay. - Wall switch plates are sold separately. - Low voltage sensors require a power pack that is sold separately. See wiring diagram on specification sheet.

Ordering Information

MODELlHuSS LightHAWK2™ Ultrasonic

Single RelaylHuSd LightHAWK2™ Ultrasonic

Dual Relay

BUTTONS01*2†








LightHAWK2TM Passive Infrared Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS

The LightHAWK2™ Passive Infrared Wall Switch Sensor uses passive infrared

(PIR) technology to detect motion. The most affordable of the motion detecting

technologies, this sensor type is ideal for detecting large motion in areas with an

unobstructed view of the sensor. This sensor has a coverage area of up to 1,000

square feet and 180° of detection.

LHIR sensors feature Hubbell Building Automation’s patented IntelliDAPTTM





With selectable operating modes — automatic ON/OFF or manual ON/automatic

OFF — and a built-in photosensor for automatic daylight harvesting, LHIR sensors

are the best choice in today’s market place.

PRODUCT fEATURES

• Digital passive infrared (PIR) sensor


• 1 or 2 relay models for single-level switching or bi-level switching control









4.2”

1.8”

2.1”


RhinoTuffTM


On/Off Button



LHIRD2

LHIRS1


OCCUPANCYSENSING

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE

347VAC

120277

VAC


Ir Motion


IntelliDAPT Technology Self-adjusting timer Self-adjusting passive infrared (PIR) sensitivity Automatic false-on/false-off corrections No manual adjustments required





Power Requirements 120-277VAC; 50/60Hz 347VAC; 50/60Hz 24VDC (requires UVPP)





Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extensionWeigh 2.9 oz




MODELlHIrS LightHAWK2™ Passive

Infrared Single RelaylHIrd LightHAWK2™ Passive

Infrared Dual Relay

NOTE: * Only available with LightHAWK2™ Passive Infrared Single Relay † Only available with LightHAWK2™ Passive Infrared Dual Relay - Wall switch plates are sold separately. - Low voltage sensors require a power pack that is sold separately. See wiring diagram on specification sheet.

Ordering Information




BUTTONS0

1*

2†





LightHAWK2TM Night Light PIR Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS

Whether used for code compliance or for mere convenience, the LightHAWK2™

Night Light Wall Switch Sensor combines passive infrared (PIR) technology with the

added safety and comfort of a night light. Ideal for use in the hospitality industry,

this sensor has a coverage area of up to 1,000 square feet and 180° of detection

and is ready to use anywhere a little extra light would make all the difference.





with IntelliDAPT provide a maintenance-free install-and-forget operation. With

selectable operating modes — automatic ON/OFF or manual ON/automatic OFF

— and a built-in photosensor for automatic daylight harvesting, LHN-IR sensors

are the best choice in today’s market place.

PRODUCT fEATURES

4.2”

1.8”

2.1”


Night Light Behind RhinoTuffTM


On/Off Button


LHN-IRS1


OCCUPANCYSENSING

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

• Digital passive infrared (PIR) sensor


• 1 or 2 relay models for single-level switching or bi-level switching


• Night Light mounted under lens



• Dual 120/277 VAC operation






Single relay Wiring Without Neutral

Ir Motion







Power Requirements 120/277VAC; 50/60Hz

Electrical Ratings 120VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP 277VAC: 1,800W Fluorescent; 1/6 HP

Load Requirements None



Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extensionWeight 2.9 oz




MODELlHN-IrS LightHAWK2™ Night

Light Passive Infrared Single Relay

WIRINgN Neutral (120/277v)

N347 Neutral (347v)

BUTTONS1



lHN-IrS



1

NOTE: - Wall switch plates are sold separately.


LightHAWK2TM Dimming Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS

The LightHAWK2™ Dimming Wall Switch Sensor combines passive infrared (PIR)

technology with the additional energy savings of 0-10V dimming. The user can set

the occupied level to a predetermined level or set the sensor to activate to the

last-used dimming level. With ON/OFF and Dimming Control, the user can easily

adjust the light level for their area. This sensor has a coverage area of up to 1,000

square feet and 180° of detection.






With selectable operating modes — automatic ON/OFF or manual ON/automatic

OFF, occupancy on to predetermined dimming level go to last dimming setting

upon occupancy — and a built-in photosensor for automatic daylight harvesting,

LHD-IR sensors are the best choice in today’s market place.

PRODUCT fEATURES

• All-digital passive infrared (PIR) sensor

• 0-10V dimming capabilities


• 1 relay model for single-level switching





• Dual 120/277V or 347V operation




4.2”

1.8”

2.1”


RhinoTuffTM


On/Off Button


LHD-IRS3


OCCUPANCYSENSING

Raise Button

Lower Button

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Single relay Wiring Ir Motion





Dimming 0-10V, Sink up to 30mA



Power Requirements 120-277VAC; 50/60Hz

Electrical Ratings 120-277VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP





Weight 2.9 oz




MODELlHd-IrS LightHAWK2™ Dimming

Passive Infrared Single Relay


lHd-IrS


BUTTONS3

3

NOTE: - Wall switch plates are sold separately.



WIRINgN Neutral (120/277v)

N347 Neutral (347v)


OMNIDT2000

OMNITM Low voltage Dual Technology Ultrasonic and PIRCEILINg MOUNT OCCUPANCY SENSORS

The OMNIDT combines ultrasonic (US) and passive infrared (PIR) technologies

to turn lighting on and off based on occupancy. This dual technology provides

accurate turn-ons while virtually eliminating false-offs. This sensor features

Hubbell Building Automation’s patented IntelliDAPT technology, which makes all

the sensor adjustments automatically.

Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled

area and makes digital adjustments to sensitivity and timer settings. Occupancy


PRODUCT fEATURES

• IntelliDAPT self-adaptive technology - no manual adjustment

required

• All-digital dual technology (ultrasonic [US] and

passive infrared [PIR]) sensor

• Non-volatile memory for sensor settings

• 500–2,000 square-foot coverage area (depending on model)

• Optional relay and photocell control

• Optional Quick to Install (QTI) connector

• UL and cUL listed

• California Title 24 compliant


1.5”

PIR Sensor

4.5”

UltrasonicSensor

IntelliDAPTOCCUPANCY

SENSING

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE


ModEloMNI

oMNI dt

tEcHNologYdt Dual Technology

coVEragE500 500 sq. ft.

1000 1,000 sq. ft.2000 2,000 sq. ft.

rElaY / PHotocEll oPtIoN

rP Relay & Photocellblank No Option

QtIQtI Quick to Install

blank No QTI


IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds Automatic false-on/false-off corrections

LED Lamp Red - infrared motion Green - ultrasonic detection

Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)

Ultrasonic (US) Output OMNIDT500: 40kHz output OMNIDT1000 and OMNIDT2000: 32kHz

Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens

RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0 to 1,000 lux)

Coverage 500 sq ft; 180° coverage 1000 sq ft; 180° coverage 2000 sq ft, 360° coverage

Power Requirements 24V, 33mA (uses UVPP and MP- Series power pack- not included)

Output 24V active high-logic control signal with short circuit protection and optional dry contact (see RP options)

Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C)

Relative humidity (non-condensing): 0% to 95%

Construction Casing- rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors

Color-coded leads are 6” long

Dimensions 4.5”DIA, 1.5”H

Weight 5.0 oz

Color Off-white

Mounting Mounting base provided Recommended mounting height: 8ft with a max mounting height of 12ft.

Certifications UL and cUL listed


12'

23'

22'23'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

16'

12'

32'23'

22'23'

32'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

32' 23'

64'45'

12'22'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion


OMNIDT2000OMNIDT1000OMNIDT500


OMNIUS500

OMNITM Low voltage Ultrasonic Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS

The OMNIUS uses ultrasonic (US) technology to turn lighting on and off based on

occupancy. Designed specifically for both areas with obstructions (e.g. columns,

cubicles, stalls, and filing cabinets) and areas with long periods of minor-motion

activity (e.g. typing), this sensor features Hubbell Building Automation’s patented

IntelliDAPT technology, which makes all the sensor

adjustments automatically.



sensors with IntelliDAPT provide a maintenance-free install-and-forget

operation.

PRODUCT fEATURES

• IntelliDAPT self-adaptive technology - no manual

adjustment required

• Superior all-digital ultrasonic (US) minor motion detection


• 500–2,000 square-foot coverage area

(depending on model)






1.5”

UltrasonicSensor

4.5”


SENSING

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE


ModEloMNI

oMNI uS

tEcHNologYuS Ultrasonic

coVEragE500 500 sq. ft.1000 1,000 sq. ft.2000 2,000 sq. ft.

rElaY / PHotocEll oPtIoNrP Relay & Photocell

blank No Option

QtIQtI Quick to

Installblank No QTI


IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic thresholds Automatic false-on/false-off corrections

LED Lamp Green - ultrasonic motion


Ultrasonic (US) Output OMNIUS500: 40kHz output OMNIUS1000 and OMNIUS2000: 32kHz output

RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux)

Coverage 500–2,000 square feet (depending on model)



24V active high-logic control signal with short circuit protection


Construction Casing - rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long


Weight 8.2 oz

Color Off-white

Mounting Mounting base provided

Recommended mounting height: 8ft with a max mounting height of 12ft.




64'45'

23'32'

Minor Motion

Major Motion

23'

23'

Minor Motion

Major Motion

16'

16’

23'

23'

32'

32'

Minor Motion

Major Motion

US 2000 RangeUS 1000 RangeUS 500 Range


OMNIIR

OMNITM Low voltage Passive Infrared Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS

PRODUCT fEATURES


• All-digital passive infrared (PIR) sensor


• 450 - 1,500 square-foot coverage area (depending on model)






The OMNIIR uses passive infrared (PIR) technology to turn lighting on and off

based on occupancy. Designed specifically for areas with long-range major-motion

activity, this sensor features Hubbell Building Automation’s patented IntelliDAPT

technology, which makes all the sensor adjustments automatically.




1.5”

PIR Sensor

4.5”


SENSING

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE


ModEloMNI

oMNI Ir

tEcHNologYIr Passive Infrared

coVEragEl Long Range IR,

1,500 sq. ft.blank 450 sq. ft.

rElaY / PHotocEll oPtIoNrP Relay & Photocell

blank No Option


blank No QTI



LED Lamp Red - infrared motion




Coverage 450 - 1,500 square feet






Weight 5.0 oz

Color Off-white





12'

6'

Minor Motion

Major Motion

12'

22'

Minor Motion

Major Motion

OMNI IR Range OMNI IRL Range



OMNITM Low voltage Dual Technology Acoustic and PIRCEILINg MOUNT OCCUPANCY SENSORS

OMNIDIA

The OMNIDIA combines passive infrared (PIR) and acoustic (sound-activated)

technologies to turn lighting systems on and off based on occupancy. The

OMNIDIA features Hubbell Building Automation’s patented IntelliDAPT

technology, which makes all the sensor adjustments automatically.




PRODUCT fEATURES


• All-digital dual technology (acoustic and passive infrared [PIR]) sensor


• 450 square-foot coverage






1.5”

PIR Sensor

4.5”


SENSING

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE



blaNk No QTI

ModEloMNI

tEcHNologYdIa Dual Technology

Acoustic & Passive Infrared

rElaY/PHotocEll oPtIoNrP Relay & Photocell

blaNk No Option



LED Lamp Red - infrared motion Green - acoustic detection



RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24V; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux)

Coverage 450 square feet





Construction Casing—rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors



Weight 5.0 oz

Color Off-white





12'

6'

Minor Motion

Major Motion


12'

6'

Minor Motion

Major Motion

oMNI dIa


OMNIDT2000BP1277

OMNI-BPTM Line voltage Dual TechnologyCEILINg MOUNT OCCUPANCY SENSORS

The OMNIDTBP1277 line voltage ceiling sensor combines ultrasonic (US) and

passive infrared (PIR) technologies to turn lighting on and off based on occupancy.

This dual technology provides accurate turn-ons while virtually eliminating false-

offs.

This sensor features Hubbell Building Automation’s patented IntelliDAPT

technology, which makes all the sensor adjustments automatically. Throughout the

product’s lifespan, smart software analyzes the controlled area and makes digital

adjustments to sensitivity and timer settings. Occupancy sensors with IntelliDAPT

provide a maintenance-free install-and-forget operation.

PRODUCT fEATURES

• IntelliDAPT self-adaptive technology - no manual adjustment required

• All-digital dual technology (ultrasonic [US] and passive infrared [PIR]) sensor



• Self-contained power supply

• Universal voltage (100-277VAC; 50/60 Hz)




UltrasonicSensor

4.5”

3.4”

PIR Sensor

2.5”

Power Supply

1.95”


SENSING

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic and passive infrared thresholds Automatic false-on/false-off corrections

LED Lamp Red—infrared motion Green—ultrasonic motionTimer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)

Ultrasonic (US) Output OMNIDT500: 40kHz output OMNIDT1000 and OMNIDT2000: 32kHz


Coverage 500 sq ft; 180° coverage 1000 sq ft: 180° coverage 2000 sq ft; 180° coverage

Power Requirements 100/277VAC; 50/60Hz Single phase only

Output 24VDC active high-logic control signal with short circuit protection

Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Magnetic Ballast 16A: 120 or 277VAC Electronic Ballast 1HP: 120VAC Motor Load 3/4HP: 277VAC Motor Load


Construction Casing—rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long


Weight 8.2 oz (232g)

Color Off-white

Mounting Mounting using a 3 inch mud ring attached to 4 inch square electrical box Recommended MAX mounting height: 12ft.



12'

23'

22'23'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

DT 500 Range

12'

32'

23'

22'23'

32'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

32' 23'

64'45'

12'22'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

DT 1000 Range DT 2000 Range

MODEL

oMNIdt500bP1277 Line voltage Ultrasonic and PIR Ceiling Sensor 500 Sq ft coverage




0 hubbell-automation.com

OMNIUS500BP1277

OMNI-BPTM Line voltage Ultrasonic Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS

The OMNIUSBP1277 line voltage ceiling sensor uses ultrasonic (US) technology

to turn lighting on and off based on occupancy. Designed specifically for both

areas with obstructions (e.g. columns, cubicles, stalls, and filing cabinets) and

areas with long periods of minor-motion activity (e.g. typing), this sensor features



Throughout the product’s lifespan, smart software analyzes the controlled area and

makes digital adjustments to sensitivity and timer settings. Occupancy sensors with

IntelliDAPT provide a maintenance-free install-and-forget operation.

PRODUCT fEATURES


• Superior all-digital ultrasonic (US) minor motion detection








UltrasonicSensor

4.5”

3.4”Power Supply

1.95”

2.5”


SENSING

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic thresholds Automatic false-on/false-off corrections

LED Lamp Green—ultrasonic motion

Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy)

Test mode: 8 seconds (for an easy check at installation)

Ultrasonic (US) Output OMNIUS500: 40kHz output OMNIUS1000 and OMNIUS2000: 32kHz output


Power Requirements 100/277VAC; 50/60Hz Single phase only


Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Magnetic Ballast 16A: 120 or 277VAC Electronic Ballast 1HP: 120VAC Motor Load

3/4HP: 277VAC Motor Load





Weight 8.2 oz

Color Off-white

Mounting Mounting using a 3 inch mud ring attached to 4 inch square electrical box Recommended MAX mounting height: 12ft.



MODEL

oMNIuS500bP1277 Line voltage Ultrasonic Ceiling Sensor 500 Sq ft coverage




64'45'

23'32'

Minor Motion

Major Motion

23'

23'

Minor Motion

Major Motion

US 2000 RangeUS 1000 RangeUS 500 Range

23'

23'

32'

32'

Minor Motion

Major Motion


OMNIIRBP1277

OMNI-BPTM Line voltage Passive Infrared Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS

The OMNIIRBP line voltage ceiling sensor uses passive infrared (PIR) technology

to turn lighting on and off based on occupancy. Designed specifically for areas

with long-range major-motion activity, this sensor features Hubbell Building

Automation’s patented IntelliDAPT technology, which makes all the sensor

adjustments automatically.


makes digital adjustments to sensitivity and timer settings. Occupancy sensors

with IntelliDAPT provide a maintenance-free install-and-forget operation.

PRODUCT fEATURES


• All-digital passive infrared [PIR]) sensor








4.5”

3.4”

PassiveInfraredSensor

2.5”

Power Supply

1.95”


SENSING

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Power Supply


IntelliDAPT Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds

Automatic false-on/false-off corrections

LED lamp Red—infrared motion

Timer timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)



Power Requirements 100-277VAC; 50/60Hz Single phase only









Weight 8.2 oz

Color Off-white

Mounting Mounting base provided Recommended MAX mounting height: 12ft.



MODEL

oMNIIrbP1277 Line voltage Passive Infrared Ceiling Sensor 450 Sq ft coverage

oMNIIrlbP1277 Line voltage Passive Infrared Ceiling Sensor 1500 Sq ft coverage


12'

6'

Minor Motion

Major Motion

12'

22'

Minor Motion

Major Motion

OMNI IR Range OMNI IRL Range


OMNIDIABP1277

CEILINg MOUNT OCCUPANCY SENSORS

The OMNIDIABP line voltage ceiling sensor combines passive infrared (PIR) and

acoustic (sound-activated) technologies to turn lighting systems on and off based

on occupancy. The OMNIDIABP features Hubbell Building Automation’s patented

IntelliDAPT technology, which makes all the sensor adjustments automatically.




PRODUCT fEATURES


• All-digital dual technology (acoustic and passive infrared [PIR]) sensor


• 450 square-foot coverage






4.5”

3.4”


2.5”

Power Supply

1.95”


SENSING

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

OMNI-BPTM Line voltage Dual Technology Acoustic and Passive Infrared


Power Supply


IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds

Automatic false-on/false-off corrections

LED Lamp Red—infrared motion Green- acoustic detection



Coverage 450 square feet

Power Requirements 100-277VAC; 50/60Hz Single phase only









Weight 8.2 oz

Color Off-white


Recommended MAX mounting height: 12ft.



MODEL

oMNIdIabP1277 Line voltage Dual Technology Acoustic and Passive Infrared Ceiling Sensor 450 Sq ft coverage


12'

6'

Minor Motion

Major Motion

DIA Range

oMNIdIabP1277


LODT

LightOWLTM Dual Technology Ultrasonic and Passive Infrared Sensor

CEILINg AND WALL MOUNT OCCUPANCY SENSORS

The LightOWLTM Dual Technology Ultrasonic and Passive Infrared Sensor combines

ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and off

based on occupancy. Designed specifically for areas where ceiling sensors are

not appropriate, this sensor features Hubbell Building Automation’s patented


Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled area



PRODUCT fEATURES


• All-digital dual technology passive infrared (PIR) and ultrasonic (US) sensor


• 1,600 square-foot coverage area


• Optional Quick-to-Install (QTI) connector




6.58”

3.63”

3.72”

PIR Sensor

UltrasonicSensor


SENSING

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared and acoustic thresholds Automatic false-on/false-off corrections

LED Lamp Red - infrared motion Green - ultrasonic detection

Timer Timeout Automatic mode: 8–30 minutes (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)


Ultrasonic (US) Output Operating frequency: 32kHz


Factory set at 3,000 lux (disable photocell)

Coverage 1,600 square feet

Power Requirements 24VDC, 33 mA (uses UVPP and MP-Series power pack—not included)

Output 24VDC active high-logic control signal with short circuit protection and optional dry contact (see: RP Option)


Construction Casing – Rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) Color-coded leads are 6” long

Dimensions 6.58”H x 3.63”W x 3.72”D

Weight 5.0 oz

Color Off-white




lo dt


blank No QTI

ModEllo

tEcHNologYdt Dual Technology

Ultrasonic and Passive Infrared


rP Relay Photocellblank No Relay Photocell


20'

32'23'

40'

23'32'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion


LOIR

LightOWLTM Passive Infrared Sensor CEILINg AND WALL MOUNT OCCUPANCY SENSORS

The LightOWLTM Passive Infrared Sensor sensor uses passive infrared (PIR) technology

to turn lighting on and off based on occupancy. Designed specifically for areas with

long-range major-motion activity, this sensor features Hubbell Building Automation’s

patented IntelliDAPT technology, which makes all the sensor adjustments

automatically.




PRODUCT fEATURES


• All-digital dual technology passive infrared [PIR] sensor








6.58”

3.63”

3.72”

High ImpactPlastic Casing

PIR Sensor


SENSING

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC




LED Lamp Red - infrared motion



RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24 VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux) Factory set at 3,000 lux (disable photocell)





Construction Casing – Rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) Color-coded leads are 6” long


Weight 5.0 oz

Color Off-white





lo IrWV


blank No QTI

ModEllo

tEcHNologYIrWV Passive Infrared

Wide View

IrHb Passive Infrared High Bay



20'

40'

IR Minor Motion IR Major Motion


LODIA

LightOWLTM Dual Technology Passive Infrared and Acoustic SensorCEILINg AND WALL MOUNT OCCUPANCY SENSORS

The LightOWLTM Dual Technology Passive Infrared and Acoustic Sensorr combines

passive infrared (PIR) and acoustic (sound-activated) technologies to turn lighting

on and off based on occupancy. This sensor features Hubbell Building Automation’s

patented IntelliDAPT technology, which makes all the sensor adjustments

automatically.




PRODUCT fEATURES


• All-digital dual technology (passive infrared [PIR] and acoustic) sensor







• Five-year limited warranty6.58”

3.63”

3.72”

High ImpactPlastic Casing

PIR Sensor


SENSING

Acoustic Located Behind Cover

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



blank No QTI

ModEllo

tEcHNologYdIa Passive Infrared and

Acoustic





LED Lamp Red—infrared motion Green—acoustic detection








Construction Casing – Rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long


Weight 5.0 oz

Color Off-white





20'

32'23'

40'

23'32'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

lo dIa


IWSZPM

The IWSZPM is a Title 24 compliant, manual-on, passive infrared (PIR) wall switch vacancy

sensor that provides excellent energy savings and reliable motion detection. The sensor’s

low-profile casing design provides the perfect wall switch for residential areas, such as

bathrooms, garages, laundry rooms and utility rooms.

The IWSZPM’s manual-on/automatic-off operation meets Title 24 guidelines for residential

lighting, which requires a person to manually turn on lighting and the sensor to automatically

turn off lighting during vacancy.

PRODUCT fEATURES



• Adjustable time delay and sensitivity

• Walk test indicator



• Title 24 compliant


2.75”

4.5”

1.65”

PIR Sensor

Manual On/ Auto Off Passive Infrared Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS

OCCUPANCYSENSING

Manual On Button

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 4 3

COLORW WhiteI Ivory

MODELIWSZP

IWSZP M

CONTROLM Manual On/Auto Off


Timer Timeout Fully adjustable from 30 seconds to 30 minutes

Sensitivity Fully adjustable from 20% to 100%

Passive Infrared Multi-segment IR Fresnel lens

Coverage 900 sq. ft., 180 degrees

Power Requirements 120 or 277VAC, 60 Hz

Electrical Ratings 120VAC: 800W Incandescent, 1000W Fluorescent, 1/6 HP

277VAC: 1800W Fluorescent, 1/6 HP

Load Requirements No minimum load

Operating Environment Indoor use only Operating temperature: 32o to 122o F (0o to 50o C) 0% to 95% relative humidity, non-condensing

Construction Housing – high-impact, injection-molded plastic Color-coded leads are 6” long


Weight 2.9 oz

Color White, Ivory

Mounting Single gang NEMA style switch box, decorator style wall plate included

Certifications UL and cUL Listed



Ground(Green)

Ground(Green)

Load Neutral

RedRed

Line

BlackBlack

16'(4.9m)

35'

(10.8m)

floor

15ϒ15ϒ

4.0'(1.2m)

35'(10.8m)


IWSZP3P

The IWSZP3P is an automatic passive infrared wall switch occupancy sensor that provides

excellent energy savings as well as reliable motion detection. The sensor's low profile housing

design provides the perfect wall switch for applications including private offices, conference

rooms, break rooms, lounges and storage areas.

When a person enters the sensor’s field of view, the IWSZP3P will automatically switch “ON”

available lighting. The sensor will automatcially switch OFF lighting after a specific time

period of no occupancy.

PRODUCT fEATURES



• Adjustable time delay and sensitivity

• Built-in photocell

• Walk test indicator




Automatic Passive Infrared Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS

OCCUPANCYSENSING

2.75”

4.5”

1.65”

PIR Sensor

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


COLORW WhiteI Ivory

MODELIWSZP

IWSZP 3P

CONTROL3P Auto On/Auto Off


Timer Timeout Fully adjustable from 30 seconds to 30 minutes

Sensitivity Fully adjustable from 20% to 100%

Passive Infrared Multi-segment IR Fresnel lens

Photocell Adjustable ambient light override ranges from approximately 5 foot-candles (50 lux) to 200 foot-candles (2000 lux)

Coverage 900 sq. ft., 180 degrees

Power Requirements 120 or 277VAC, 60 Hz

Electrical Ratings 120VAC: 800W Incandescent, 1000W Fluorescent, 1/6 HP

277VAC: 1800W Fluorescent, 1/6 HP

Load Requirements No minimum load

Operating environment Indoor use only Operating temperature: 32o to 122o F (0o to 50o C) 0% to 95% relative humidity, non-condensing

Construction Housing – high-impact, injection-molded plastic Color-coded leads are 6” long


Weight 2.9 oz

Color White, Ivory

Mounting Single gang NEMA style switch box, decorator style wall plate included




Ground(Green)

Ground(Green)

Load Neutral

RedRed

Line

BlackBlack

16'(4.9m)

35'

(10.8m)

floor

15ϒ15ϒ

4.0'(1.2m)

35'(10.8m)


TD300

Digital Programmable TimerPOWER PACKS AND RELAYS

With its aesthetically pleasing features, the TD300 combines style with functionality as it

provides energy saving control of incandescent, LED and fluorescent lighting, as well as

certain motor loads such as fans, hot tub heaters and circulating pumps.

The timer offers two presets for energy code compliance – two hour timing for Title 24 and

IECC and 4 hour timing for ASHRAE 90.1. A timed override allows lights and HVAC (heating,

ventilating and air conditioning) to remain on for a specified amount of time for after-hours

cleaning crews. The TD300 is easy to install and can replace any wall switch.

PRODUCT fEATURES

• Supports multiple timer intervals

• Energy code presets for Title 24, IECC, and ASHRAE 90.1

• Visual and audible turnoff warning

• 3 Way and Multiple Way Switching

• No Neutral Required

• No Load Requirement

• Dip switch control of features




2.75”

4.5”

1.65”

Display

Manual On Button

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


td300


Power Requirements 120/230/277VAC; 50/60Hz

Electrical Ratings 120VAC - 15A Resistive - 10A Ballast - 1200W LED Lamp Driver - 8A Tungsten - 1/4HP Motor - 360VA Pilot Duty 277VAC - 15A Resistive - 15A Resistive - 10A Ballast


Operating Environment Indoor use only Operating environment: 32° - 122°F (0°-50°C) Relative humidity (non-condensing): 0%-95%

Construction Casing – high impact injection-molded plastic Wall plate locks access to DIP switches for tamper resistance

Display Backlit LED


Weight 2.9 oz

Color White

Mounting Single-gang NEMA-style switch box (average switch box) Decorator wall plate sold separately




MODELtd300

CONTROLW White

W



Electrical Ratings Each switch: 100mA @ 30VDC Max Each pilot LED: 18-30VDC, internal 2.2kohm, ½ Watt resistor

Configurations 1 - 4 buttons, with or without pilot LED Momentary or latching (sustained)


Construction Housing – Rugged, high-impact, injection-molded plastic Color-coded leads

Dimensions 1.88”W x 4.25”H x 1.56”D

Weight 3.0 oz

Color White, Ivory, Light Almond, Gray

Mounting Single-gang NEMA-style switch box (average switch box) Decorator-style wall plate not included


LVSM1NP LVSM1PL

SENSOR MODELlVS

lVS

SENSOR TYPEM Momentaryl Latching

PILOTPl w/ Pilot LEDSNP No Pilot

NUMBER Of BUTTONS 12

3

4

COLORWH White

IV Ivory

la Light Almond

g Gray

Hubbell Building Automation’s Low Voltage Wall Switches are designed for virtually

any indoor area. The soft contours of its architecturally pleasing design fit easily

into any décor. Switches are available in both momentary or latching versions and

feature multiple button configurations making them the perfect switch solution for

use with HBA’s Lighting Control Panels.

PRODUCT fEATURES

• Attractive, architecturally pleasing design

• Momentary or latching versions available

• 1-4 buttons with or without LED

• Mounts to standard single-gang box

• Title 24 compliant when used as part of compliant system



Low voltage SwitchesLvS SERIES

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE


HBA TrackerOCCUPANCY AND LIgHT LEvEL DATA LOggER

The Hubbell Building Automation (HBA) Tracker is an occupancy and light level

data logger that records room occupancy, lighting, and daylight patterns for easy

verification of potential savings by installing HBA occupancy sensors and daylight

harvesting products. The HBA Tracker’s robust reporting tools take the guesswork

out of energy audits. Data is collected once per minute to ensure accurate payback

analysis. Smart software averages similar area types for full building analysis. The

light weight sensor easily mounts via strong magnet for easy set-up. The unit

connects to a PC via included USB cord. The intuitive software includes a variety

of reports customizable to the space.

PRODUCT fEATURES

• Digital passive infrared (PIR) sensor with daylight sensor

• No wiring required

• Reusable magnetic mounting

• User replaceable 9V battery

• Easily connects to computer (PC) via USB Cable

LL-200


Power Requirements Powered by 9 Volt battery (included)

Passive Infrared Dual element pyrometer and spherical Fresnel lens

Daylight Sensor Range: 30 – 2500FC

Operating Environment Indoor use only; Operating temperature: 32° to 149°F (0° to 65°C)

Dimensions 4.0”DIA x 1.5”H

Weight 7 oz.



ll-200

MODEL

ll-200 Tracker and Occupancy and Light Level Data Logger


• PC based software included

• Windows XP / Windows 7

• User set inputs for accurate reporting

• Downloadable reports available in PDF and CVS File versions



UVPP

POWER PACKS AND RELAYS

Universal voltage Power Packs

PRODUCT fEATURES

2.33”

3.69”

1.36”

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE

The Universal Voltage Power Pack (UVPP) is a self-contained transformer and relay

designed for low-voltage 24VDC occupancy sensors. The power pack supports

and automatically detects the line-voltage input within the 100–277VAC range.

This eliminates the need for voltage-specific power packs. The Universal Voltage

Power Pack with Manual ON/OFF control (UVPPM) provides a unique solution for

lighting applications where users require both manual ON/OFF control as well as

automatic OFF control.

Both power packs are capable of switching 20A loads and feature Zero Arc Point

Switching, minimizing relay-contact wear from high inrush loads. A single power

pack can power either 4 sensors or 3 sensors and the MPSA auxiliary relay for

multiple circuits. The power packs are plenum rated and easily mount inside or

outside of a junction box or inside a fixture.

• Universal voltage: 100–277VAC; 50/60Hz

• Automatic voltage detection

• Electrical load switching capability: maximum of 20 Amps

• Regulated 24VDC current; 150mA output


• Plenum rated

• Mounts: inside or outside a junction box; inside a fixture

• Available with exclusive Quick-to-Install (QTI) connector

• Companion auxiliary relay device available (MPSA)



UVPPM


ModEluVPP Universal Voltage Power Pack

uVPPQtI Universal Voltage Power Pack with QTI ConnectorMPSa Auxiliary Relay Device

uVPPM Universal Voltage Power Pack with Manual ON/OFF Control


general Specification

Power Requirements 100–277VAC; 50/60Hz

Output (UVPP/UPPM) 24VDC; 150mA nominal, isolated, and regulated

Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Ballast 1HP: 120 or 277VAC Motor Load

Plenum Rated Complies with requirements for use in a plenum area Plenum rated for external junction box mounting


Dimensions 3.69”L x 2.33”W x 1.36”D

Weight 15 oz.

Color Black



UVPP Wiring Diagram

UVPPM Wiring Diagram

and is powered by 24VDC supplied by UVPP or UVPPM


MP347A

POWER PACKS AND RELAYS

MP347A Power Pack

PRODUCT fEATURES

347VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

The MP347A is a self-contained transformer and relay (an ON/OFF switch

controlled by a circuit) designed for low-voltage 24VDC occupancy sensors.

This power pack is capable of switching 15A loads and feature Zero Arc Point

Switching, minimizing relay-contact wear from high inrush loads. A single power

pack can power either 3 sensors or 2 sensors and the MPSA auxiliary relay for

multiple circuits. The power packs are plenum rated and easily mount inside or

outside of a junction box or inside a fluorescent ballast cavity.

• Plenum rated

• Self-contained transformer and relay

• 347VAC, 60Hz

• Regulated 24 VDC current; 100 mA output

• Easily mounts inside or outside a junction box

• Optional Quick To Install (QTI) connector

• Companion auxiliary relay device available



2.33”

3.69”

1.36”


ModElMP347a 347VAC Power Pack

MPSa Auxiliary Relay Device


Power Requirements 347VAC @ 60Hz

Output 24VDC; 100 mA nominal, full-wave rectified, and filtered

Relay Contact Rating 15A: 347VAC Incandescent

15A: 347VAC Ballast

Construction High-impact UL 94-5V plastic




Weight 15 oz.

Color Black






# Relays & Contact Type One (1) SPDT Continuous Duty Coil

Expected Relay Life 10 million cycles minimum mechanical

Gold Flash Yes

Contact Ratings 10 Amp resistive @ 120-277VAC

10 Amp resistive @ 28VDC

480 VA Pilot Duty @ 240-277VAC

480 VA Ballast @ 277VAC

600 Watt Tungsten @ 120VAC N/O

240 Watt Tungsten @ 120VAC N.C.

1/3 HP for N/O @ 120-240VAC

1/6 HP for N/O @ 120-240VAC

1/4 HP for N/O @ 277VAC

1/8 HP for N/C @ 277VAC

Coil Current 30 mA @ 10VAC 12 mA @ 10VDC

32 mA @ 12VAC 14 mA @ 12VDC

42 mA @ 24VAC 16 mA @ 24VDC

50 mA @ 30VAC 18 mA @ 30VDC

25 mA @ 120VAC

Coil Voltage Input RR1SPDTC120: 10-30VAC/DC, 120VAC; 50-60Hz

RR1SPDTC277: 10-30VAC/DC, 208-277VAC; 50-60Hz

Operating Environment -30° to 140°F

Housing Rating Plenum, NEMA 1

Wires 16”, 600V Rated

Certifications UL and cUL Listed, UL916, UL864


Line voltage Auxiliary RelaysPOWER PACKS AND RELAYS

Hubbell Building Automation’s Enclosed 10 Amp SPDT Relays from Functional

Devices, Inc. provide an isolated N.O. / N.C. contact that can be used to

integrate low voltage sensors to other building automation systems. The

coil contained in these relays can be powered by more than one voltage. An

externally visible LED indicates the status of the coil of the relay.

120277

VAC

RRISPDTC


ModElrr1SPdtc120 Enclosed Relay 10 Amp SPDT with 10-30VAC/DC/120VAC Coilrr1SPdtc277 Enclosed Relay 10 Amp SPDT with 10-30VAC/DC/208-277VAC Coil




Electrical Ratings RRU120 – 2400 watts @ 120VAC 50/60 Hz, 1 HP RRU277 – 5000 watts @ 277VAC 50/60 Hz, 1.5 HP

Operating Environment Indoor use only

Dimensions 2.75”W x 4.5”L x 1.10”DWeight 3.0 oz.

Color White


Warranty Five years

RRU

ModElrru120 Auxiliary Relay for 120V Line Voltage Sensorsrru277 Auxiliary Relay for 277V Line Voltage Sensors

Line voltage Auxiliary RelaysPOWER PACKS AND RELAYS

PRODUCT fEATURES


Hubbell Building Automation’s remote relay units (RRU) are used to switch

additional lighting or other control circuits. Designed to work with line voltage

sensors, the RRU provides 20 amp switching capacity and features a Normally

Open (N/O) isolated contact.

• 120 or 277VAC models available

• 20 Amp switching capacity

• N.O. isolated contact



120277

VAC


HCRA

LMRA

OPE

ACAK(Shown with LightOWL

mounting arm.)

acak — acoustic ceiling Mounting kit

For ceiling and wall mount sensors used with acoustic ceiling tile. ACAK

uses integral cutting teeth for quicker installation. Color: White.

lMra — lightoWl Mud ring adaPtEr

A LightOWL goof ring for covering oversized holes. Color: White.

oPE – oMNI Protective Enclosure

The OPE is a NEMA Type 4X enclosure specifically designed for use

with HBA’s OMNIIR ceiling mount occupancy sensor. Designed to

provide protection from foreign materials and water, the enclosure is

acceptable for use in a variety of environments including applications in

the pharmaceutical and food pre-paration industries. Size: 6.5”DIA, 2”H

Color: White.

Hcra — Hard ceiling raceway adapter

For OMNI™ sensors. The HCRA is compatible with Hubbell™ and

Wiremold™ raceway. The HCRA has knockout raceway holes for quick

and clean installation. Color: White.

WgWS – Wall mount wire guard for wall switches,

6.25”H x 4.0”W x 2.25”D

WgoMNI – Ceiling mount guard for OMNI sensors,

7.0”W x 3.25”D (circular guard) Wire guards are heavy-duty coated wire

guards for sensors to protect from destructive strikes. Mounting clips are

included. Color: White.

Wglo – Wall mount wire guard for LightOWL sensors,

7.0”H x 5.75”W x 4.5”D

Ceiling and Wall Mount Occupancy Sensor AccessoriesSENSOR ACCESSORIES

WGWS

WGLO

WGOMNI

COLORacak Acoustic Ceiling Mount KitlMra LightOWL Mud Ring Adapter

Hcra Hard Ceiling Adapter

oPE Omni Protective Enclosure

WgWS Wire Guard for Wall Switches

Wglo Wire Guard for LightOWL sensors

WgoMNI Wire Guard for Omni Sensors



OCCUPANCY SENSINg

The HBA WASP2 and Dimming WASP are intelligent Passive Infrared

(PIR) occupancy sensors. The occupancy sensing feature maximizes

energy savings by respectively allowing for smart switching or

dimming depending on code or application requirements.

COMPLIANCE

These specialty sensors meet the latest energy efficiency codes and

standards, including ASHRAE/IESNA 90.1 and CEC’s Title 24, and can

provide LEED (Leadership in Energy and Environmental Design) points

in categories including Sustainable Sites, Energy and Atmosphere,

Indoor Environmental Quality and Innovative Design Process.

DAYLIgHT HARvESTINg

The WASP2 and Dimming WASP can decrease energy consumption by

utilizing daylight harvesting. These sensors have an integral photocell

which allows for even more energy savings during daylight hours by

turning off lights when there is sufficient natural light.

fLEXIBILITY

The WASP2 and Dimming WASP support mounting heights from 18

to 45 feet and feature multiple outputs and mounting options for

versatility. The sensor is available in one-relay, two relay, 24VDC,

120/277/347VAC, 208/240VAC, 480VAC, and low voltage versions.

Surface and end-mount versions increase installation flexibility.

LENS OPTIONS The WASP2 and Dimming WASP lines also offers different lenses

with versatile masking options providing customized coverage for

your space. These options include: High Mount, Low Mount, 360°

Coverage, 180° Coverage, Aisle Patterns, and Half Aisle Patterns.

Occupancy Sensors for High Mount and Outdoor Use

Reduce energy consumption, maximize illumination performance, and meet optimal operating costs and lighting code standards

with HUbbell Building Automation’s WASP2 and Dimming WASP. HBA’s WASP Occupancy/ Motion sensors takes the sting out

of meeting energy codes while maximizing the energy savings available from LED lighting.

WASP sensors provide occupancy sensing and daylight harvesting for indoor and outdoor lighting applications. Depending on

the WASP2 or Dimming WASP model chosen, sensors may be configured to turn lights off or go to preset dimmed settings to

provide optimal safety and security while still providing energy savings for the user. The WASP sensors are ideal for a variety of

applications such as parking garages, area/site lighting, pathways, warehouses, storage areas, stairwells and more.


SPECIALTY OCCUPANCY SENSORS AND CONTROLLERS

End Mount WASP2 Sensor with lens option

The HBA WASP2 Indoor/Outdoor Occupancy Sensor is specifically designed

for ON/OFF control of high bay fixtures in warehouse, distribution centers and

similar facilities. The WASP2 sensor is also available for low mount applications

when using the appropriate lens. The sensor is available in end mount and surface

mount versions with either single or dual outputs.

All WASP2 sensors feature a daylight sensor which can be used to increase energy

savings by turning off lights when there is sufficient natural light detected. These

sensors also have a unique feature known as Smart Cycling™ which ensures even

lamp burn time within multi lamp flourescent fixture. Using the “Smart Cycling”

feature, the amount of time each lamp is burned is maintained and kept balanced.

PRODUCT fEATURES

• Digital Passive Infrared (PIR) sensor

• Supported mounting heights:

• High mount lens: Up to 30 ft outdoors; 45 ft indoors

• Low mount lens: Up to 16 ft indoors/outdoors

• Multiple (single and dual) output versions

• Unique Smart Cycling™ for improved lamp life

• End mount and surface mount versions

• Interchangeable high/low area detection lens options

• Low voltage and line voltage models available

• Daylight sensor for daylight harvesting applications

• Low temperature/water-tight/indoor-outdoor versions

• IP65 Rated version available



4.0”

InterchangeableLens Options

High Impact PlasticDesign

1.5”

HBA WASP2TM Occupancy Sensor

OCCUPANCYSENSING

SMART CYCLING

RATED

WATER-DUST RESISTANT

IP65

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

DAYLIGHTHARVESTING



Power Requirements Line Voltage sensors: 120/277/347VAC, 208/240VAC, 480VAC, 60 Hz Low Voltage sensors: 24VDC (uses UVPP or MP-Series power pack – not included)

Load Ratings 120VAC: 0-800W ballast or 0-600W tungsten, 60Hz (Line Voltage Sensors) 277VAC: 0-1200W ballast 347VAC: 0-1500W ballast 208/240VAC: 0-1200W ballast 480VAC: 0-2400W ballast ¼ HP motor load @ 120VAC, 1/6HP @ 347VAC

Output (Low Voltage Sensors) 24VDC active high-logic control signal Relay: N/O + N/C contacts; 500mA rated @ 24VDC; three wire isolated relay

User Interface (1) Twelve pin DIP switch

Timer Timeouts Primary: 8-second test mode - 4, 8, 16 and 30 minute timeouts Secondary: Can be disabled (switches off with primary timer) - 30, 60 and 90 minute timeouts

Passive Infrared Dual element pyrometer and spherical Fresnel lens designed for robust detection of a walking person. (When used with program start ballast, a 1-2 second delay from occupancy detection to lamp turn-on may be experienced.)

Daylight Sensor Range: 30 – 2500FC End mount sensor: Downward and upward looking daylight sensors (Direction selectable via DIP switch) Surface mount sensor: Downward looking daylight sensor only

Interchangeable Lens Options Lens options: (Lenses sold separately – not included with sensor module) Low Mount/High Mount Indoor/Outdoor Coverage: 360°, 180°, Aisle, Half Aisle

Operating Environment Standard version: Indoor use only; Operating temperature: 32° to 149°F (0° to 65°C); Relative humidity (non-condensing): 0% to 95% Low-temperature/Water-tight/Indoor-Outdoor version: Operating temperature: -40° to 149°F (-40° to 65°C)

Construction Sensor Module and Lens Assembly – high impact, injection-molded plastic

Dimensions 4.0”DIA, 1.5”HWeight 7 oz.

Color White, Black and Gray

Mounting End mount sensor: Mounts directly to end of fixture through extended ½” chase nipple For deeper body fixtures, an optional Extender Adapter (available separately) positions the sensor flush or below the bottom of the reflector for a full field-of-view. Surface mount sensor: Mounts directly to fixture or j-box via (2) 1.25” stainless steel screws and locking nuts

Certifications Conforms to UL STD 508, UL STD 244A Conforms to IP65 (Low-temperature/Water-tight version)


Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens

Sensor Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens


120/277/347vAC WASP2 Wiring Diagram

208/240 & 480vAC WASP2 Wiring Diagram

24v WASP2 Wiring Diagram

Example: WSP EM UNV LWO – Wasp End Mount Sensor, 120-347VAC, Low Temp/Water Tight, White

SENSOR MODEL

WSPMOUNTINg

EM End MountSM Surface Mount

INPUT vOLTAgE 24V 24VDC (Low Voltage)uNV 120/277/347VACuNV2r 120/277/347VAC (2 Outputs)208 208/240VAC480 480VAC

LOW-TEMP/ WATER TIgHTblank Standard VersionlWo Low-Temp/Water Tight/ Indoor/Outdoor

WSP


COLORblank WhiteBK BlackGY Gray

For available lens options and ordering information, reference the WASP2 Occupancy Sensor Lens Specification Sheet.

The Optional WSPADAPTOR2 offset adaptor can be used to improve the field of view for fixture mounted sensors

where the geometry of the fixture might otherwise interfere with the sensor’s performance. The adapter snaps into

a standard 1/2” knockout on the end of the fixture and provides several mounting position choices for the sensor.

MODELWSPadaPtor2

WSPadaPtor2


accessory


End Mount Dimming WASP Sensor with lens

HBA Dimming WASPTM

OCCUPANCY SENSORS AND CONTROLLERS

The HBA Dimming WASP Indoor/Outdoor Occupancy Sensor is specifically designed

to provide 0-10V (Class 1) control of dimmable fixtures. Easy to use DIP switches allow

the user to set unoccupied and occupied dimming levels. The sensor is available

in end mount and surface mount versions in both line and low voltage options.

Interchangeable twist-on lenses eliminate need for field masking. All Dimming WASP

sensors feature a daylight sensor for ON/OFF control of fixtures when there is sufficient

natural light.

The gasketed design of the enclosure makes it impervious to dust and able to withstand

water ingress making it an ideal sensor for outdoor and wet locations including those

with temperatures as low as - 40°F to 149°F (-40°C to 65°C).

PRODUCT fEATURES


• Supported mounting heights:

• High mount lens: Up to 30 ft outdoors; 45 ft indoors

• Low mount lens: Up to16 ft indoors/outdoors

• Controls 0-10V dimmable ballasts; 0-10V LED drivers

• User controlled dimming presets

• Daylight sensor for daylight harvesting applications

• End mount and surface mount versions

• Interchangeable high/low area detection lens options

• Low voltage and line voltage models available

• Low temperature/water-tight/indoor-outdoor versions

• Available in White, Black and Gray

• IP65 Rated version available



RATED


IP65

0-10VDIMMING

OCCUPANCYSENSING

DAYLIGHTHARVESTING

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

4.0”



1.5”


general SpecificationsPower Requirements Line Voltage sensors: 120/277/347VAC, 208/240VAC, 480VAC, 50/60Hz

Low Voltage sensors: 24VDC (uses UVPP or MP-series power pack – not included)

Load Ratings 120VAC: 0-800W ballast or 0-600W tungsten, 60Hz

(Line Voltage Sensors) 277VAC: 0-1200W ballast

347VAC: 0-1500W ballast

208/240VAC: 0-1200W ballast

480VAC: 0-2400W ballast

¼ HP motor load @ 120VAC, 1/6 HP @ 347VAC

0-10V Dimming Capable of sinking up to 30mA

Output (Low Voltage Sensors) 24VDC active high-logic control signal

Relay: N/O + N/C contacts; 500mA rated @ 24VDC

User Interface Twelve pin DIP switch for initial choice of functionality

Timer Timeouts 8-second test mode – 1, 5, 10 and 15 minute timeouts

Dimming Presets Unoccupied: 70%, 60%, 50%, 20%

Full Off Timer Delay Enabled: After 60 minutes in the Unoccupied low level state, sensor will turn lighting off

Disabled: Sensor will maintain low level setting when there is no occupancy

Passive Infrared Dual element pyrometer and spherical Fresnel lens designed for robust detection of walking person

(When used with program start ballasts, a 1-2 second delay from occupancy detection to lamp turn-on may occur)

Daylight Sensor Range: 1 to 50FC or 5 to 500FC

End mount sensor: Downward and upward facing daylight sensor (direction selectable via DIP switch)

Surface mount sensor: Downward facing daylight sensor only

Interchangeable Lens Options and Coverage Lens options: (Lenses sold separately – not included with sensor module)

Low Mount/High Mount

Indoor/Outdoor

Coverage: 360°, 180°, Aisle, Half Aisle

Operating Environment Indoor/outdoor use

Operating temperature: - 40°F to 149°F (-40°C to 65°C)

Construction Sensor Module and Lens Assembly: high-impact, injection-molded plastic


Weight 7 oz.

Color White, Black, Gray

Mounting End mount sensor: 1/2” chase nipple

Optional extender adapter (available separately)

Surface mount sensor: Mounts directly via (2) 1.25” stainless screws and locking nuts

Certifications Conforms to UL STD 508, UL STD 244A

Conforms to IP65 ( low-temp, water tight/indoor/outdoor versions)



Sensor Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens


120/277/347vAC Dimming WASP Wiring Diagram

208/240 & 480vAC Dimming WASP Wiring Diagram

24v Dimming WASP Wiring Diagram

Example: WSPEMUNVLWO-D-BK – Wasp End Mount Sensor, 120-347VAC, Low Temp/Water Tight, 0-10 Dimming, Black

SENSOR MODEL

WSPMOUNTINg

EM End MountSM Surface Mount

OUTDOOR RATINg /LOW-TEMP

blank Indoor

lWo Low-Temp/Water Tight/ Indoor/Outdoor

INPUT vOLTAgE 24V 24VDC (Low Voltage)uNV 120/277/347VAC208 208/240VAC480 480VAC

DIMMINg OPTIONd 0-10V Dimming

COLORblank Whitebk BlackgY Gray

WSP d


For available lens options and ordering information, reference the WASP2 Occupancy Sensor Lens Specification Sheet.

The Optional WSPADAPTOR2 offset adaptor can be used to improve the field of view for fixture mounted sensors

where the geometry of the fixture might otherwise interfere with the sensor’s performance. The adapter snaps into

a standard 1/2” knockout on the end of the fixture and provides several mounting position choices for the sensor.

MODELWSPadaPtor2

WSPadaPtor2


accessory


HIgH BAY OCCUPANCY SENSORS AND CONTROLLERS

HBA WASP2TM Occupancy Sensor Lens Options

The HBA WASP2TM and Dimming WASP family of occupancy sensors offers

a variety of interchangeable lenses with versatile masking options providing

customized coverage for your space. These options include: High Mount, Low

Mount, 360° Coverage, 180° Coverage, Aisle Patterns, and Half Aisle

Patterns.


MODEL

WSPCOvERAgE

l360 360° Area Lensl180 180° Area LenslH Aisle LenslHa Half Aisle Lens

ENvIRONMENT

blank IndoorlWo Low-Temp/Water-Tight/Outdoor

COLORWH Whitebk BlackgY Gray

RATED


IP65

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

WSP

MOUNTINgblank High MountlM Low Mount

daylighting controls

PAgE 6 6

HBA introduces the Zone5 Daylight Harvesting System, which combines all three daylighting approaches and controls

tailored to the specific and demanding needs of daylight harvesting applications. Daylighting controls like HBA’s Zone5

Harvesting System impact budgets by harnessing the sun’s power to reduce energy consumption. HBA’s solutions for

daylighting control include dimming, stepped dimming, and switching systems.

Dimming systems continuously adjust light output by signaling dimming ballasts, and stepped dimming offers the

advantages of full-range dimming without the expense of dimming ballasts. Lamps are either fully turned off or partially

turned off, depending on natural light levels.

Switching systems turn lighting OFF or ON in accordance with available natural light. With a lower initial cost than dimming

systems, switching systems are most often recommended for warehouses, storage areas, atrium, lobbies and parking

facilities, where non-stationary tasks are performed.

SAvE MONEY

Cut lighting costs by up to 75%. Master Off and Row Off functions

can contribute to additional energy savings when users turn the

lights off ahead of the occupancy sensor detecting that the room

is empty.

SAvE TIME

Zone5 controls are plug-and-play, eliminating wiring labor costs.

USER-fRIENDLY PROgRAMMINg

SD Card interface provides a simple way to commission, log, verify

and update the Zone5 system. Control parameters can be copied

to the card from one Zone5 Control Module to another, email from

specifier or Zone5 PC-based template builder.

INTUITIvE, EASY-TO-USE LCD MENU

The two-line LCD interface is intuitive, easy-to-use and interactive.

The interface allows users to quickly change system settings or

monitor system diagnostics in real time.

fLEXIBILITY

All Zone5 switches can be ganged together to form custom switch

stations, maximizing flexibility in multi-use rooms. Color-coded

plug-and-play jumper cables are available to be ordered

separately, making installation effortless.

Let the Sun Be Your Guiding Light ™

PAgE 67(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com


Z5-CM

The HBA Zone5 Daylight Harvesting System features specialized controls tailored

to the specific and demanding needs of daylight harvesting applications. The HBA

Zone5 Control Module (ZCM) is the central controller of the system. It accurately

analyzes and interprets signals from Zone5 plug and play components, including

occupancy sensors, daylight sensors and low voltage switches to control both

General and A/V lighting. The ZCM supports up to 4 zones of lighting that can

be individually programmed for either daylight switching, stepped dimming or

continuous dimming. A fifth zone for standard ON/OFF control of whiteboard

lighting is also supported.

The Zone5 Control Module features an intuitive menu driven LCD user interface

to program system settings, view system/device status, and perform system

diagnostics and testing. The ZCM features an SD card interface that can be used to

save system settings and copy them to another controller, cutting down on the time

required to commission multiple systems. Each Zone5 input device is equipped

with color coded plug and play connectors which snap into the corresponding

port on the ZCM.

PRODUCT fEATURES

HBA Zone5 Control ModuleDAYLIgHT HARvESTINg CONTROLS

• Supports up to five zones of lighting control

• Daylight switching, stepped dimming or continuous dimming –

per zone for four zones

• Controls both General and A/V lighting

• Whiteboard lighting control

• Intuitive menu-driven LCD user interface

• Seamless integration with Zone5 sensors and lighting control switches

• SD card interface for saving and loading system settings

• Event logging

• Contractor-friendly, color coded plug and play installation



12”

4”

15”

Lighting Control Switch Ports

Master/ RowControl

Ports

Dimming Control Ports

Occupancy Sensor Ports

Daylight Sensor Ports

DAYLIGHTHARVESTING

0-10VDIMMING

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

120277

VAC



User Interface 2-line LCD display 4 navigational buttons SD Card interface – used for system settings, logging and firmware updates

Daylight Harvesting Options For each zone Switched Stepped dimming Full range dimming None (Not Daylight Harvested)

Color Coded Low Voltage Ports Uses standard RJ45 connectors Plenum rated, low voltage system cabling (sold separately) Blue – lighting control Yellow – master and row control Orange - 0-10V dimming White – occupancy sensor Green – daylight sensor

Demand Response Dry contact input

Electrical Each Zone (1-4) 1 relay: general lighting 1 relay: A/V lighting Dimming: 0-10V, capable of controlling up to 50 low voltage, 2-wire, 0-10V dimming ballasts Additional relay for whiteboard lighting Switched output per relay 15A tungsten (120v only,) 20A magnetic ballast, 16A electronic ballast Maximum combined output not to exceed 20A

Dimension 4”W x 12”H x 15”D

Weight 20.75 lbs



ModElZ5-cM Zone5 Control Module

Z5-cM


Dry Contact Terminal

LCD Display

SD Card Interface

Option Board

Terminal Block


Z5-OS-OMDT2000RP

HBA Zone5 Ceiling and Wall Mount Occupancy SensorsDAYLIgHT HARvESTINg CONTROLS

The HBA Zone5 Ceiling Mount and Wall Mount Occupancy Sensors combine

ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and

off based on occupancy. This dual technology provides accurate turn-ons while

virtually eliminating false-offs.

These sensors feature Hubbell Building Automation’s patented IntelliDAPT®

technology, which makes all the sensor adjustments automatically. Throughout

the product’s lifespan, IntelliDAPT software analyzes the controlled area and



PRODUCT fEATURES

• Occupancy Sensors for Zone5 Daylight Harvesting System

• IntelliDAPT self-adaptive technology – no manual adjustment required

• All-digital dual technology (ultrasonic [US] and passive infrared [PIR]) sensors


• 1,600 and 2,000 square-foot coverage area

• Form C relay with N/O + N/C outputs

• Color coded, plug and play installation



24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


OCCUPANCYSENSING

6.58”

3.63”

3.72”

PIR Sensor

UltrasonicSensors

PIR Sensor

4.5”

UltrasonicSensors

1.5”

Z5-OS-LODTRP


MODELZ5-oS-oMdt2000rP Zone5 Occupancy Sensor, Ceiling Mount,

PIR and Ultrasonic, Form C Relay, 2000 Sq. Ft.

Z5-oS-lodtrP Zone5 Occupancy Sensor, Wall Mount, PIR and Ultrasonic, Form C Relay, 1600 Sq. Ft.CAT5 Cable Sold Separately


IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic and passive infrared thresholds Automatic false-on/ false-off corrections

LED Lamp Red – infrared motion Green – ultrasonic motion

Timer Timeout Automatic mode: 8 – 30 min. (self adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)

Ultrasonic (US) Output Operating frequency: 32 kHz


Form C Relay Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay

Coverage Ceiling mount sensor: 2,000 square feet Wall mount sensor: 1,600 square feet

Power Requirements 24VDC, 33mA Power and 24VDC active high-logic output control signal provided through plenum rated CAT5 plug-and-play cable (ordered separately)


Construction Casing – rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UV-945VA) flame class rating, UV inhibitors

OMDT2000RP Dimensions 4.5” diameter, 1.5” height (114 mm diameter, 38mm height)


LODTPRP Dimensions 6.58”H x 3.63”W x 3.72”D


Color Off-white





Z5-OS-OMNIDT2000RP Range Diagram Z5-OS-LODTRP Range Diagrams


32' 23'

64'45'

12'22'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

20'

32'23'

40'

23'32'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

20'

32'23'

40'

23'32'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion

20'

32'23'

40'

23'32'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion


Z5-SW-GAV

The HBA Zone5 Low Voltage Wall Switches provide manual control of the HBA

Zone5 Daylight Harvesting System. The Zone5 system consists of two types of

switches – Lighting Control Switches and Master/Row Control Switches.

The Lighting Control Switches include a General – A/V switch that enables users

to switch between General Lighting and Audio Visual Lighting, a General – A/V

lighting dimming switch that raises and lowers light levels in both modes, a

whiteboard lighting switch that can control up to two independent whiteboard

lights, and a Study Time switch that provides uninterrupted lighting during periods

of low activity. The Master/Row Control Switches include a Master ON/OFF switch

that turns all lighting ON or OFF, and individual Row (1 – 4) ON/OFF switches that

control each row of lighting individually. All Zone5 switches are color coded and

provide CAT5 plug and play installation to the Zone5 Control Module

PRODUCT fEATURES

• Supports up to 4 zones of lighting control


• General – A/V lighting control with optional dimming control

• Whiteboard lighting control

• Master and individual row ON/OFF control

• Color-coded, plug and play installation

• All switches mount to standard single or multi-gang wall boxes

• Multi-gang wall plates available


1.6”

4.2”

1.4”

On/OffSwitches


HBA Zone5 Low voltage Wall SwitchesDAYLIgHTINg CONTROLS

Z5-SW-ST

Z5-SW-MC

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Power Requirements Each switch: 100mA @ 30VDC Max – Provided by Zone5 low voltage color coded plug and play cable (ordered separately) Master/Row control switches: Use with yellow cable Lighting Control Switches: Use with blue cable

Operating Environment Indoor use only Operating temperature: 32°to 122°F (0° to 50°C) Relative humidity (non-condensing): 10% to 90%

Construction Housing – Rugged, high-impact, injection-molded plastic

Dimensions 4.2”H x 1.6”E x 1.4”D

Weight 1.6 oz

Color White

Mounting Switches may be mounted individually in a single gang switch box or ganged together in a multi-gang switch box NOTE: When ganging multiple switches make sure the switches are of the same color-coded type. Decorator-style wall plates available separately



LIgHTINg CONTROL SWITCHESAND CABLES

Z5-SW-gaV Zone5 General - A/V Mode Switch, White

Z5-SW-aVd Zone5 General - A/VDimming Switch, White

Z5-SW-St Zone5 Study Time Switch, White

Z5-SW-Wb Zone5 Whiteboard Switch, White

cat5-50f-bl Zone5 Cable for Lighting Control Switches, 50ft, Blue

cat5-100f-bl Zone5 Cable for Lighting Control Switches, 100ft, Blue

cat5-3IN-bl Zone5 Jumper Cable for Lighting Control Switches,3 inches, Blue

MASTER/ROW CONTROL SWITCHESAND CABLES

Z5-SW-Mc Zone5 Master ON/OFF Switch, White

Z5-SW-rcr1 Zone5 Row 1 Control Switch, White




cat5-50f-Yl Zone5 Cable for Master/Row Control Switches, 50ft, Yellow

cat5-100f-Yl Zone5 Cable for Master/Row Control Switches, 100ft, Yellow

cat5-3IN-Yl Zone5 Cable for Master/Row Control Switches, 3 inches, Yellow

WALL SWITCH PLATES

Z5-WP-1g-WH Zone5 Wall Switch Plate, Decorator Style, 1-gang, White







Electrical 4 Terminal Connections - Red: +24V - Blue: Occupancy Sensor Input - Yellow: Photocell/Daylight Sensor Input - Black: Common Class 2 device Max Cable Length Supported: 300-ft from device to control module

Plenum Rated Complies with requirements for use in a plenum area

Construction Material: SABIC NORYL HS2000X

Dimensions 2.168”L x 1.093”W x 0.995”HWeight 0.8 oz

Color Gray

Mounting Adapter may be mounted using a zip-tie (not included) or with a #8 or #10 mounting screw (not included)


RJ45 Adapter and CAT5 System CablesDAYLIgHTINg CONTROLS

Hubbell Building Automation’s RJ45 Adapter and CAT5 system cables are

designed to be used with HBA low voltage occupancy and daylight sensors. The

adapter replaces the Quick-To-Install™ (QTI) connectors previously used by the

wiHUBB® and Zone5™ occupancy and daylight sensors and enables devices to

connect to HBA control modules (e.g. wiHUBB Smart Pack, Zone5 Control Module,

etc) using standard CAT5 cable.

PRODUCT fEATURES

• Supports Zone5 occupancy and daylight sensors

• Plenum rated


RJ45Adapter

24VDC

LOW

VOLTAGE


cat5 System cables

rJ45adaPtErrJ45adaPtEr-10rJ45adaPtEr-50

RJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight SensorsRJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight Sensors - 10 PackRJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight Sensors - 50 Pack

cat5-3IN-bl

cat5-10f-bl

cat5-50f-bl

cat5-100f-bl

cat5-10f-WH

cat5-50f-WH

cat5-100f-WH

cat5-10f-gN

cat5-50f-gN

cat5-100f-gN

cat5-3IN-Yl

cat5-50f-Yl

cat5-100f-Yl

CAT5 Jumper Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 3in, Blue

CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 10ft, Blue



CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 10ft, White



CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 10ft, Green



CAT5 Jumper Cable for Zone5 Master/Row Control Switches, Plenum Rated, 3in, Yellow

CAT5 Cable for Zone5 Master/Row Control Switches, 50ft, Yellow


ModEl/dEScrIPtIoN

ModEl/dEScrIPtIoN


rJ45 adapter

SPEcIal NotES:1. When cutting CAT5 cable to specific lengths, the cable pin out is as follows:

WHITE with ORANGE STRIPEORANGEWHITE with GREEN STRIPEBLUEWHITE with BLUE STRIPEGREENWHITE with BROWN STRIPEBROWN

12345678

PIN No. WIrE color



Electrical Three jumper-selectable foot-candle ranges: 3-300fc; 30-3,000fc; 60-6,000fc 24VDC Power provided through plenum rated CAT5 plug and play cable (ordered separately)

Construction Protective hard plastic cover and housing

Dimension 2”DIA, 1.2”H



Z5-DS

ModElZ5-dS Zone5 Daylight Sensor

HBA Zone5 Daylight SensorDAYLIgHT HARvESTINg CONTROLS

The HBA Zone5 Daylight Sensor provides the necessary daylight-level information

to the Zone5 Control Module (ZCM). Using a photodiode element, this sensor

continuously measures daylight levels and sends the information to the ZCM for

daylight harvesting with lighting in the General (GEN) lighting mode. The daylight

sensor supports multiple foot-candle ranges which can be used in normal, skylight

or atrium lighting applications.

PRODUCT fEATURES

• Indoor daylight sensor for Zone5 Daylight Harvesting System

• Architecturally attractive design

• Open loop operation

• Foot-candle range: 3-6,000FC

• Mounts vertically or horizontally

• Color coded, plug-and-play installation


• Five-Year Warranty


DAYLIGHTHARVESTING

Z5-dS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE


ZoNE5 SYStEM arcHItEcturE


DLC7

Continuous Dimming ControlDAYLIgHTINg CONTROLS

Hubbell Building Automation’s DLC7 is the ideal system for providing continuous

closed loop dimming control for 2-wire 0 -10V dimming ballasts and LED dimmable

drivers based on natural daylight. This control maintains constant, undisturbed,

light levels during peak use times. Through continuous monitoring of ambient

light levels, the DLC7 dims the associated lighting fixtures to a user’s predefined

foot-candle setting. The DLC7 dimming photocell provides precise control of the

actual amount of lighting on the work surface (e.g. desktop, floor) within its field

of view. Measured light levels are converted into a linear, proportional, analog

voltage that controls the ballast or LED driver dimming range. This achieves

maximum energy savings by efficiently blending natural and artificial light to

maintain a comfortable visual environment.

The sensor head adjustment sets the maximum output of the controlled ballast

or LED driver. The sensor also provides a short and long delay. The short delay

provides faster sensor response. The long delay slows the sensor response and

maintains a more stable signal to the ballast or LED driver, accomodating for brief

changes in light due to passing clouds.

PRODUCT fEATURES

• Controls 2-wire 0 -10V dimming ballasts and LED drivers

• Light-sensitivity range of 0–500FC

• Selectable 3- or 8-second dimming rate

• Multiple calibration options

• Low-profile design


0-10VDIMMING

2.00”

1.23”

DAYLIGHTHARVESTING

Commisioning Port

24VDC

LOW

VOLTAGE


MODELdlc7 Continuous Dimming Control


Accuracy +/-1% @ 70°F (21°C); Derated to +/-5% when above 120°F or below 50°F (18° to 49°C)

Operating Environment -13°F to 140°F (-11°C to 60°C)

Sensitivity Ranges 0–500FC

Adjustment Range 10–140FC

Input Voltage 10V (supplied by ballast or LED driver)

Current Sink up to 25mA

Output Voltage 1V (light) - 10 V (dark)

Wire Leads 22 gauge Gray and violet to the Advance ballast White-green 2-wire loop cut for 10-second delay. Leave intact for 20-second delay to ballast

Sensor Type Blue enhanced photodiode

Dimensions Base diameter: 2.00” Sensor diameter: 1.29” Height: 1.23”Weight 1.2 oz.

Mounting Mounting hole: 3/8” Mounting medium: 3M™ double adhesive tape

Construction Sensor housing meets flame-retardant requirements of UL standard 94HB

Certifications ETL/UL 916



dlc7


DLCPCO

DLCPCA

DLCPCI

Daylighting Control Photocell SensorsDAYLIgHTINg CONTROLS

Hubbell Building Automation’s daylighting control photocell sensors (DLCPCI,

DLCPCO, DLCPCA and DLCPCS) provide indoor, outdoor, or skylight control of

lighting circuits based on natural daylight. The DLCPC sensors and controller are

able to provide coverage for any application. The DLCPC sensors are used in

different locations in and around a building. Indoor sensors are used in offices and

classrooms. Outdoor sensors detect light for sign and site illumination control.

Atrium sensors measure light in lobbies. Skylight sensors read the ambient light

available in warehouse skylights.

Each sensor has a different range and focus of the light being measured. The

sensor sensitivity is adjustable. Model measurements ranges include 750, 2,500

or 7,500FC. The indoor sensor has a flat Frensal lens that looks downward in a

60-degree cone of referance to measure acutal light on the work surface. The

outdoor sensor is enclosed in a weatherproof housing with a visor for shading and

lens protection. The Atrium and Skylight sensors both use diffusing dome lenses

to provide a 180-degree angle of photodiode reposnse.

PRODUCT fEATURES

• Multiple sensor options available

• Interfaces with Energy Management Systems


DAYLIGHTHARVESTING

DLCPCS

Correct orientation shown

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE

2.00”

2.00”

2.50”

1.75”

2.75”

1.75”


MODELdlcPcI Indoor Photocell Sensor, 50 - 750FCdlcPco Outdoor Photocell Sensor, 50 - 750FCdlcPca Atrium Photocell Sensor, 200 - 2500FCdlcPcS Skylight Photocell Sensor, 1000 - 7500FC



Accuracy +/-1% at 70°F (21°C Derated to +/-5% at 120°F or at) F (-18°C to 49°C)

Operating Temperature 13°F to 140°F (-11°C to 60°C)

Sensor Type Blue-enhanced photo diode

Sensor Ranges Housing Minimum Adjustable Maximum DLCPCI Indoor 50-750FC DLCPCO Outdoor 50-750FC DLCPCA Atrium 200-2,500FC DLCPCS Skylight 1,000-7,500FC

Input Voltage 24VDC

Output Voltage 10V full output

Output Offset 0VDC or 1VDC - total darkness

Wiring Three conductors 18-gauge standard cable Red: Pos. DC input Black: DC common Yellow: Output to EMS

Certifications ETL/UL 916 Listed Title 24 Listed RoHS compliant



DLCPCC

Photocell ControllerDAYLIgHTINg CONTROLS

PRODUCT fEATURES

• Adjustable on/off set points

• Dual power unit input: 24VAC or 24VDC

• Flexible control options

• Input time delay

• Two set points available for separate on and off levels


Hubbell Building Automation’s DLCPCC is the ideal system for providing indoor,

outdoor, or skylight control of lighting circuits based on daylight. The DLCPCC

lighting controller automatically switches a dry contact in response to changes in

natural light levels. The DLCPCC provides a maintained single pole, double throw

“Form C” relay output to drive electrically-held contactors or relays, or inputs

to Building Automation Systems. The low voltage controller requires a remotely

mounted photoconductive (PC) sensor (sold separately).

The DLCPCC continuously compares the remote sensor’s signal against the LOW

and HIGH light level set points. When the sensor detects decreasing light levels

that corresponds with the LOW set point, the lights are switched ON. Conversely, as

light levels increase and the sensor’s signal matches the HIGH set point, the lights

are switched OFF. The LOW and HIGH set points are separated by a “deadband.”

This prevents the DLCPCC from switching light levels between set points, thus

eliminating nuisance or intermittent changes.

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

DAYLIGHTHARVESTING

4.75”

1.5”

2.5”


MODEL

dlcPcc Photocell Controller


Accuracy +/- 1 percent at 70°F (21°C) Derated +/- 5 percent above 120°F or below 0°F (49°F / -18°C)

Sensor Type CD S Photoconductive 2 wire

Power Requirements 24VAC or 24VDC standard

Dead Band Adjustable: 5-95%

Indicators Red High and Low LEDs

Input Delay Standard 30-second sensor (removable for adjustment)

Control Inputs Photoconductive Sensor Calibration / Simulator (for optional DLCSIMM)

Output Standard form C SPDT relay 10A resistive

Operating environment Operating Temp: -13°F to 140°F (-11°C to 60°C) Indoor use only

Construction Sensor is mounted on a wall switch faceplate

Dimensions 4.75”h x 2.5”w x 1.5”D

Color White



dlcPcc


Luxstat Dimming Control ModuleDAYLIgHTINg CONTROLS

Using a unique Open Loop control algorithm, the Luxstat Dimming Control Module

by Servodan provides continuous dimming daylight harvesting control to an area. The

lights dim when there is enough daylight, and they brighten when there is not enough

daylight. Instead of measuring the light already inside an area, this module measures

the amount of daylight entering an area.

During installation, lighting levels (without artificial lighting) are measured at task

height for each of the 3 zones. The controller adjusts each of the zones independently

to maintain the desired lighting levels within each space while taking advantage of

available natural daylight. The Luxstat Dimming Control Module is part of a daylight

harvesting system that includes the Luxstat Light Sensor and the Luxstat Power Pack.

This control module can work with occupancy sensors and manual wall switches to

provide a diverse lighting solution for classrooms and meeting rooms.

PRODUCT fEATURES

• Open Loop continuous dimming daylight harvesting control

• Pushbutton programming

• Automated setup

• LCD display provides “Real Time” light-level readings

• 5 pre-programmed applications

• Continuous dimming control—choose from 1, 2, or 3 zones

• Individual adjustment for each channel of control

• Compatible with 2-wire 0 - 10V dimming ballast or LED drivers

• Integration with occupancy sensors and manual override controls

• DIN rail mounting




LUXSTATDCM

DAYLIGHTHARVESTING

0-10VDIMMING

3.54”

2.75”

2.36”

Display

Navigation Buttons

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE


luXStatdcM Luxstat Dimming Control Module, 24V DC

ModEl



Electrical Class 2

Supply Voltage LUXSTATPP Power Pack: 24 VDC

Operation Control output voltage to ballasts: 0–10V

Programmable Features Minimum output setting: 0–4V Maximum output setting: 6–10V Fade and ramp rate: 5–60 seconds Cut off delay: 0–20 minutes or infinity Maximum sink: 50mA per channel Maximum source: 3mA per channel Maximum ballasts: 50 per channel




luXStatdcM


LUXSTATOCM

Luxstat ON/Off Control Module

DAYLIgHTINg CONTROLS

PRODUCT fEATURES

• Open Loop ON/OFF daylight harvesting control

• Pushbutton programming with automated setup

• LCD display provides “Real Time” light level readings

• 5 pre-programmed applications—fit most applications without complicated setup

• Multilevel switching—choose from 1, 2, or 3 zones

• Individual adjustment for each channel of control

• Adjustable ON and OFF delays






DAYLIGHTHARVESTING

3.54”

2.75”

2.36”

Display

Navigation Buttons

The Luxstat ON/OFF Control Module by Servodan provides multilevel ON/OFF

daylight harvesting control by using a unique Open Loop control algorithm. The

lights turn off when there is enough daylight, and they turn on when there is not

enough daylight. Instead of measuring the light already inside of an area, this

module measures the amount of daylight entering an area. During installation,

lighting levels (without artificial lighting) are measured at task height for each of

the 3 zones. When daylight is adequate, the controller switches lighting off. When

daylight is below the desired level, the control module switches lighting back on.

The ON and OFF delays for each channel are individually adjustable.

The Luxstat ON/OFF Control Module is part of a daylight harvesting system that

includes the Luxstat Light Sensor and the Luxstat Power Pack. The control module

can work with occupancy sensors and manual wall switches to provide a diverse

lighting solution for classrooms and meeting rooms.

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE


luXStatocM Luxstat On/Off Control Module, 24V DC

ModEl



Electrical Class 2

Supply Voltage LUXSTATPP Power Pack: 24VDC

Programmable Features Photocell range: 3–6000FC Set point range: 5–60 foot-candles Programmable deadband: 10%–80% Adjustable ON delay: 5–60 seconds Adjustable OFF delay: 3–60 minutes Load shed set point: 5–60FC




luXStatocM


LUXSTATPP

Luxstat Power PackDAYLIgHTINg CONTROLS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

120277

VAC

PRODUCT fEATURES

• Provide power to operate Luxstat daylight harvesting control modules

• 3 individually controlled relays for ON/OFF control

• 120/230/277VAC transformer

• Quick connect to Luxstat daylight harvesting control modules


• UL listed

• California Title 24 Compliant


The Luxstat Power Pack by Servodan powers the Luxstat ON/OFF Control Module

and the Luxstat Dimming Control Module. It supplies low-voltage power to the

control modules via a quick connect cable and has 3 normally open relays (ON/

OFF switches controlled by a circuit) to switch line voltage in response to signals

from the connected controller.

Additionally, the power pack has an automatically resetting fuse. If the current

drawn from the power pack exceeds the specifications, the +24VDC output and

the LED will turn off. When the problem and the primary power are removed, the

power pack will restore power.

3.57”

2.76”

2.36”

24VDC

LOW

VOLTAGE



MODELluXStatPP Luxstat Power Pack for

Luxstat Control Modules


Voltage 120/277VAC, 50/60 Hz—single phase

Secondary Power 1,000 mA @ 24VDC

Relays 3 normally open relays (620 A @ 120 or 277VAC)




luXStatPP


LUXSTATOCM1Z

Luxstat Single Zone On/Off Control ModuleDAYLIgHTINg CONTROLS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

120277

VAC

PRODUCT fEATURES

• Open Loop ON/OFF Daylight Harvesting control


• LCD display provides Real Time light level readings

• 3 to 3000FC Range

• Single-zone switching

• Adjustable OFF delay



• UL listed



DAYLIGHTHARVESTING

The Luxstat Single Zone ON/OFF Control Module by Servodan provides single

zone ON/OFF Daylight Harvesting control utilizing a unique Open Loop control

algorithm. Instead of measuring the light inside of the space the control module

measures the amount of daylight entering the space. During installation, lighting

levels, without artificial lighting, are measured at task height for the zone to be

controlled. The level is then input into the control module. The photocell measures

daylight and transmits this data to the Luxstat Single Zone ON/OFF Control

Module. When daylight is adequate, the controller switches lights off. When

daylight diminishes below the desired set point, the control module switches

lighting back on. The OFF delay for the zone is adjustable.

The Luxstat Single Zone ON/OFF Control Module is part of a Daylight Harvesting

system that includes the Luxstat Light Sensor. The control module can also

integrate with occupancy sensors and manual control wall switches .

3.54”

2.81”

2.5”

Display

Navigation Buttons



MODELluXStatocM1Z120 Luxstat Single Zone On/Off Control Module

120VAC luXStatocM1Z277 Luxstat Single Zone On/Off Control Module

277VAC


Electrical (Input) LUXSTATOCMIZ120: 120VAC LUXSTATOCMIZ277: 277VAC Load: Max 40mA Power Consumption: Approximately 2W Signal from Light Sensor: 0-10V

Electrical (Output) Relay Contact: N/O, 10mA Load: Incandescent Lamps – 1200W Fluorescent – 620VA Halogen Incandescent – 500W Secondary Voltage: 24VDC

Performance FC Range: 0.3 – 30FC; 3-300FC; 30-3000FC Setting Range: 0.3-27FC; 3-270FC; 30-2700FC OFF Delay: 0-60 minutes

Operating Environment Temperature range: 41°F to 122°F (+5°C to +50°C)

Dimensions 3.54”H x 2.81.”W x 2.5”D

Mounting DIN Rail

Accessories IndoorLight Sensor – LUXSTATLS Outdoor Light Sensor - LUXSTATLSO LUXSTAT 1-Button Momentary Switch - LUXSTATSW1WH or LUXSTATSW1IV

Certifications UL and CE Listed



LUXSTATDNCM

Luxstat Day/Night Control Module with ClockDAYLIgHTINg CONTROLS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

120277

VAC

PRODUCT fEATURES

• Open Loop ON/OFF daylight harvesting control

• Integrated clock for night blocking



• UL listed



DAYLIGHTHARVESTING

The Luxstat Day/Night Control Module by Servodan provides single zone ON/OFF

daylight harvesting control utilizing a unique Open Loop control algorithm. In the

evening, when daylight diminishes below the desired ON set point, the control

module switches lighting on. In the morning, when daylight reaches the desired

OFF set point, lighting is switched off.

The controller’s integrated clock function switches off lighting completely during

a pre-defined period. Switching off lighting during the late evening/early morning

means more energy savings. The controller also features pushbutton programming

for easy system setup and configuration.

3.54”

1.37”

2.36”

Display

Navigation Buttons



MODELluXStatdNcM120 Luxstat Day/Night Control Module with Clock,

120VAC, DIN Rail Mount

luXStatdNcM277 Luxstat Day/Night Control Module with Clock, 277VAC, DIN Rail Mount

36-080 Minilux Control

Test

Mode Set +

AppI n Out

Luxrange

Luxon

Offdelay Test

Set -

B12 3

23

B

D

45

D1

CC 1 23

L

N

21 4 21 3

LuxPIR

NP

N 0-10V


Electrical (Input) LUXSTATDNCM120: 120VAC LUXSTATDNCM277: 277VAC Load: Max 40mA Power Consumption: Approximately 2W Signal from Light Sensor: 0-10V

Electrical (Output) Relay Contact: N/O, m10A Load: Incandescent Lamps – 1200W Fluorescent – 620VA Halogen Incandescent – 500W Secondary Voltage: 24VDC

Performance Fc Range: 0.3 – 30FC Adjustment range for Fc on: 1 – 30FC

Adjustment Range for FC off: Minimum: 10% of Fc on, but not less than 0.3FC Maximum: 70% of Fc on but not more than 9FC Tolerance of Fc range: +-10% Backup for clock: > 2 hours, when the unit has been connected at least 5 minutes

Operating Environment Temperature range: 41°F to 122°F (+5°C to +50°C)


Mounting DIN Rail

Accessories Outdoor Light Sensor – LUXSTATLSO Indoor Light Sensor - LUXSTATLS

Certifications UL and CE Listed



LUXSTATLS

Luxstat Light SensorDAYLIgHTINg CONTROLS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE

The Luxstat Light Sensor by Servodan provides the necessary daylight-level

information to the Luxstat daylight harvesting control modules. Using a

photodiode element, this sensor continuously measures daylight levels and sends

the information to the selected Luxstat daylight harvesting control module. In

order to operate as a true Open Loop controller, the sensor must be positioned

to see only daylight (no artificial light). You select the applicable foot-candle range

by using a jumper beneath the front cover.

PRODUCT fEATURES

• Daylight sensor for Luxstat Daylight Harvesting System


• Indoor and outdoor versions


• Foot-candle range: 3-6,000FC





DAYLIGHTHARVESTING

2”

1.2”


MODELluXStatlS Luxstat Light Sensor - Indoor

luXStatlSo Luxstat Light Sensor - Outdoor



Electrical Four jumper-selectable foot-candle ranges: .03-30FC; 3-300FC; 30-3,000FC; 60-6,000FC 24VDC Low Voltage Class 2 Device 3-conductor 22 AWG twisted cable—equal to Belden 8443


Dimension 2” diameter x 1.2” height (50.8 diameter x 30.5mm height)



78-050

A

B

17 23 45 68 91 01 11 2

17 23 45 68 91 01 11 2

A

B

21 3

Lux0-10V

Luxstat Control

Light sensor

Luxstat Control DIM

45º

30º

30º


LUXSTATSW4WH

Hubbell Building Automation’s Low Voltage Wall Switches for Luxstat provides

manual control of the Luxstat Daylight Harvesting Control Modules. The 4-button

switch allows occupants to override the automatic daylight control and provides

manual ON/OFF and dimming control. The 2-Button Auto/Manual Wall Switch

allows occupants to override the automatic daylight control and provides manual

ON/OFF control. The 2-Button Dimming Wall Switch provides manual dimming

control. The 1-Button Momentary Wall Switch provides manual ON/OFF control.

PRODUCT fEATURES


• Multiple button configurations available

• Manual ON/OFF control

• Low voltage operation; Class 2 device



24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

1.6”

4.2”

1.4”

DimmingSwitches


Low voltage Wall Switches for LuxstatDAYLIgHTINg CONTROLS

LUXSTAT2DIM

ManualSwitch

AutoSwitch



Power Requirements Each switch: 100mA @ 30VDC Max Each pilot LED: 18-30VDC, internal 2.2kohm, ½ Watt resistor

Operating Environment Indoor use only Operating temperature: 32°to 122°F (0° to 50°C) Relative humidity (non-condensing): 10% to 90%

Construction Housing – Rugged, high-impact, injection-molded plastic

Dimensions 4.2”H x 1.6” W x 1.4” D

Weight 1.6 oz

Color White, IvoryMounting Single gang NEMA-style switch box Decorator-style wall plates available separately



COLORWH WhiteIV Ivory

MODELluXStatSW4

luXStatSW2 autoluXStatSW2 dIM

luXStat SW1


lighting control Panels

PAgE 98


Interior and exterior lighting can account for 40% of all energy costs on a property.

Recover as much as 25-50% of that cost in the first six months of implementing HBA’s

LX networked lighting control system. LX is a network of expandable and modular relay

panels, sensors and switches. Take control of your lighting near or far with its intuitive

programming interface, touchscreen tablet and remote access via LAN and Internet.

Connect to any point on the topology-free, polarity-insensitive, 2-wire LON communication network with our LonMark® certified

architecture. Install sensors and switches “plug-and-play” for endless possibilities in control and savings.

SAVE TIME

LX control panels are simple to install and use. The LX series

utilizes LonMark® certified architecture so sensors and

switches can be installed plug-and-play by connecting to

any point on the topology-free, polarity-insensitive 2-wire

communication network.

FLEXIBILITY

The LX networked lighting controls use a hand-held

touchscreen GUI interface that keeps up with the constant

progression of lighting control systems.

IMPROVE THE EASE OF LIGHTING CONTROL

• Unique hand-held touchscreen GUI

• Robust and reliable 20Amp

mechanically-latching relays

• Multiple size enclosures available

(4, 8, 16, 32, and 48 relays)

• Powered, topology-free, polarity-insensitive,

2-wire communication

• LonMark® certified

• Seamless integration with major building

protocols, such as LON, BACnet® and

MODBUS®

• Feature-rich scheduling functions

• 365-day time clock

• Automatic daylight savings time and leap year

compensation

• Built-in astronomical time clock for sunrise and

sunset programming

Seamless Networked Lighting

(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 9 9


LX Lighting Control PanelsLX SERIES NETWORKED LIgHTINg CONTROLS

The LX Series Network Lighting Control Panels are the core of the LX system

providing programmable switching control of the project’s lighting circuits.

Multiple panels are equal peers on the network and can have relays controlled

individually or in groups by any input, schedule, preset or Building Automation

System.

PRODUCT fEATURES

• Unique hand-held touchscreen graphical user interface (GUI) (Order Separately)

• Robust and reliable 20 Amp mechanically latching relays

• Multiple size enclosures available (4, 8, 16, 32, and 48 relays)

• Topology-free, polarity-insensitive, 2-wire communication

• LonMark ® certified



• Automatic Daylight Savings Time and leap year compensation

• Built-in astronomical time clock for sunrise and sunset programming


NETWORK

120347VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


MODELlXIN LX Relay Panel Interiors

lXIN

RELAY CAPACITY48163248

NUMBER Of SINgLE POLE RELAYS00-48

(Depending on Size)

NUMBER Of DOUBLE POLE RELAYS00-24

(Depending on Size)

*NOTE: Number of poles cannot exceed the relay panel size. Example: A LX Series Relay Panel is comprised of 2 separate part numbers, 1 for the interior and 1 for the enclosure — they must be the same size.

Example:32 Relay Interior with 4 Single Pole Relays and 4 Double Pole Relays: LXIN32 04 04Enclosure to complete specifications - LXEN325

MODELlXEN LX Relay Panel

Enclosure

lXEN

SIZE48163248

TRIMf FlushS Surface


Programming and Configuration Programmable via the LX Touch Tablet or LX JENEsys™

Physical NEMA 1 enclosure, surface or recessed Pre-drilled mounting holes for easy mounting either to the uni-strut framing or directly to wall, KO’s provided on top and bottom Removable interior assembly 4, 8, 16, 32, and 48 relay enclosures with hinged locking door

Electrical 120/277/347VAC multi-tap transformer 120, 277, and 347VAC 20 Amp Single Pole Relays

208, 240, and 480VAC 20 Amp Double Pole Relays

Operating Environment Location: interior space Operating temperature: 0° to 50°C (32° to 112°F) Relative humidity (non-condensing): 10%–90%

Certifications UL and cUL listed (UL 508, 916 and UL 924) LonMark 3.3 Certified




LXRL1

LXRL2

LX RelaysLX SERIES NETWORKED LIgHTINg CONTROLS

480VAC

120347VAC

PRODUCT fEATURESNETWORK

0.9”

3.75”

2.3”

1.9”

3.75”

The heart of any lighting control system is the relay. With today’s new high

in-rush lighting loads and demanding inductive switching requirements,

only the most robust relays are capable of keeping up with the demands

placed upon them.

LX Relays are recognized as the industry’s most robust and reliable relays

on the market today. With a 2,000 Amp in-rush current and 14,000 Amp

short circuit current, our relays are built to last.

• Robust and reliable mechanically latching relay

• Suitable for high in-rush loads up to 2,000 Amps

• 14,000 Amp SCCR @277VAC

• 120, 277 & 347VAC Single Pole

• 208, 240 & 480VAC Double Pole

• Built-in manual override lever & ON/OFF indicator

• UL Listed




lXrl1 LX Relay, Single Pole, 120/277/347VAC

lXrl2 LX Relay, Double Pole, 120/277/347VAC


Physical Mechanically-held latching relay Mounts in LX panel to supplied mounting bracket Built-in manual override lever & ON/OFF indicator on each relay Tool-less insertion and removal of relay

Electrical UL Endurance Test 60k Operations at 20A, 300VAC 14,000 Amp short circuit current @277VAC* 20 Amp Single Pole – 120, 277 & 347VAC 20 Amp Double Pole – 208, 240 & 480VAC ½HP@110-125VAC, 1 ½HP@220-277VAC

Operating Environment Location: Interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative Humidity: 10% to 90% non-condensing

Dimensions Single Pole: 3.75”L x 0.9”W x 2.3”D Double Pole: 3.75”L x 1.9”W x 2.3”D

Certifications UL & cUL Listed (UL 508)


*Applicable to Single Pole Relay only.


NOTE: Touch Screen Graphic User Interface(GUI) not included. Order Separately.

LXBC Breaker Control Panels LX SERIES NETWORKED LIgHTINg CONTROLS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA


120277

VAC

480VAC

57”

20”

5.75”

Touchscreen Interface

Breakers/ Breaker Relays

The LXBC Breaker Control Panel provides the opportunity to combine controlled

and non-controlled loads into a single, fully functional branch circuit panel board.

The LXBC integrates seamlessly into the LX Lighting Control Network and can be

used as a stand-alone LX control panel or combined in a network with other LX

and/or LXBC panels.

• Unique, hand-held touch screen graphical user interface (GUI) (Order Separately)

• Robust and reliable 20 and 30 Amp mechanically latching circuit breaker/relays

• Multiple size enclosures available (12, 18, 30, and 42 spaces)

• 100 AMP, 225 AMP or 400 AMP bussing Main Lugs or Main Circuit Breaker

• 120/208V, 3PH, 4W or 277/480V, 3PH, 4W





• Automatic Daylight Savings Time and leap year compensation

• Built-in astronomical time clock for sunrise and sunset programming



MODELlXbc LX Breaker

Control Panel

SYSTEM vOLTAgE1 120/208, 3

Phase, 4 Wire2 277/480, 3

Phase, 4 Wire

MAINSIl 100 Amp

Main Lugs Only

Ic 100 Amp Main Circuit Breaker

2l 225 Amp Main Lugs Only

2c 225 Amp Main Circuit Breaker

4l 400 Amp Main Lugs Only

4c 400 Amp Main Circuit Breaker

fEEDb Bottom Feed

Only (Top Feed is not available)

RELAY SPACES12 12 Spaces18 18 Spaces30 30 Spaces42 42 SpacesNOTE: 42 space is available in 225A and 400A main size only.

COMMUNICATIONSH HBA LX-Lon

ENCLOSURE1S NEMA 1

Surface1f NEMA 1

Flush3S NEMA 3

Surface3f NEMA 3

Flush

lXbc b H

400 amp57"

69"

20"

20"

5.75"

5.75"

D W

H


Programming and Configuration Programmable via the LX Touch Tablet

Physical NEMA 1 enclosure, surface or flush mount NEMA 3 enclosure, surface or flush mount KOs provided on top and bottom 12, 18, 30, and 42 space enclosures with hinged locking door

Electrical 120VAC input control voltage at terminal block 15 Amp, 20 Amp and 30 Amp 1-pole and 2-pole Circuit Breaker/Relays Non-Control circuit breakers 15A – 100A, 1,2, and 3-pole 100 AMP, 225 AMP or 400 AMP Lugs Only or Main Circuit Breaker, CU/AL Lugs Bottom Feed only, Top Feed is not available. 120/208V, 3PH, 4W or 277/480V, 3PH, 4W system voltage, 14KAIC @277/480V, 65KAIC Series Rated with main CB

Operating Environment for Location: interior spaceNEMA 1 Rated Equipment Operating temperature: 0° to 50° C (32° to 112° F) Relative humidity (non-condensing): 10% to 90%

Certifications UL listed (UL 916) LonMark 3.3 Certified


Dimensions

Example: Panel, Controlled Circuit Breaker/Relays, and Non-Controlled Breakers must be

ordered as separate line items:

1 ea LXBC11CB30H1S

100A Main Circuit Breaker, 120/208V, 3 Phase, 4 wire,

30 Space, NEMA 1 Surface, Bottom Feed, CU/AL Lugs

18 ea LXBR120C – 20A, 1P, Controlled Circuit Breaker/Relays (18 ea)

12 ea LXBR120N – 20A, 1P, Non-Controlled Circuit breakers (12 ea)



The LXBR Circuit Breaker/Relays and Circuit Breakers are the heart of the LX Breaker

Control Panel Series. The use of a combination LXBC Lighting control panel can

save space by providing controlled and non-controlled loads in any combination.

LXBR Circuit Breaker/Relays communicate seamlessly with the LX Lighting Control

System to provide both control and branch circuit protection for the project’s

lighting loads.

Controlled Circuit Breaker/Relay1-Pole shown (2-Pole also available)

1-Pole 3-Pole

Non-controlled Circuit Breakers

LXBR Circuit Relays and Circuit Breakers LX SERIES NETWORKED LIgHTINg CONTROLS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


120277

VAC

480VAC

• Robust and reliable 20 and 30 Amp mechanically- latching Circuit Breaker/Relays

• Circuit Breaker/Relays are available in 1-pole, 120/277V and 2-pole, 480V

• Non-controlled Circuit Breakers are available in 1-pole to 120/277V and

2-pole or 3-pole, 480V

• All devices are rated for switching duty (SWD)

• 14,000 Amp interrupting capacity (AIC)

• Built-in ON/OFF indicator lever



MODELlXbr LX Breaker Relay

or Breaker

NO. Of POLES1 1-Pole2 2-Pole3 3-Pole

AMP RATINg15 15 Amp20 20 Amp30 30 Amp40 40 Amp50 50 Amp60 60 Amp70 70 Amp90 90 Amp

100 100 Amp

CONTROLc Controlled

N Non-Controlled

NOTE: Controlled Breaker/Relays are available in 15A, 20A and 30A 1-Pole and 2-Pole ONLY.

lXbr



Physical Mechanically-held latching circuit breaker/relay or non-controlled circuit breaker Mounts in LXBC panel bus with bolt into pre-drilled and tapped hole Built-in ON/OFF indicator lever on each circuit breaker/relay Power to panel must be disconnected for insertion and removal of devices

Electrical 600VAC 20 Amp and 30 Amp Single and Double Pole Circuit Breaker/Relays Non-Control circuit breakers 15A – 100A, 1,2, and 3-pole 14KAIC @277/480V, 65KAIC Series Rated with main CB Circuit Breaker Relays – Maximum duty cycle of 6 Open/Close cycles per minute

Operating Environment for Location: interior space

NEMA 1 Rated Equipment Operating temperature: 0° to 50° C (32° to 112° F) Relative humidity (non-condensing): 10% to 90%

Certifications UL listed (UL 489)




Programming and Configuration Device used to program the functionality of other LX lighting control system devices Can program security codes

Physical Hand-held device Quarter VGA display (320 x 240 pixels)

Electrical 5VDC power—supplied from the LX panel

Operating Environment Location: interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative humidity (non-condensing): 10% to 90%

Dimensions 7.5”W x 6”H x 1”D


LXTB

lXtb

MODELlXtb LX Touch Screen Tablet

Touch Tablet graphical User Interface LX SERIES NETWORKED LIgHTINg CONTROLS

PRODUCT fEATURES


NETWORK

The LXTB Touch Tablet Graphical User Interface provides easy-to-use intuitive

access to the LX System programming. The Tablet allows the user to program the

system, view status of devices and relays, and make changes to the system while

connected.

The LXTB is not required to be connected to the LX System for all functionality to

occur, rather it only displays activity such as clock time to the user. The LX system

program allows for user access to be define in the tablet, or facility managers can

simply control access to the tablet for system security.

• Portable hand-held touch screen

• Graphical user interface (GUI)

• Context-sensitive help

• Quarter VGA display (320 x 240 pixels)

• High-contrast backlit LCD screen

• Programmable security codes


TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Network Interface Screw terminal connector

Operating Environment 32°to 140°F (0° to 60°C)



MODELlXtErMINator LX Free Topology Bus Terminator

LXTERMINATOR

lXtErMINator

Hubbell Building Automation’s LX Terminator ensures the correct operation of the

LX Series’ free topology (FT), twisted-pair communication networks. On an FT

network, each LX Series network segment needs to correctly terminate so that

network signals do not reflect back to the segment.

The LX Terminator absorbs these network signals and provides a low-cost solution

for terminating network segments. The LX Terminator is not required for link power

(LP) networks.

LX TerminatorLX SERIES NETWORKED LIgHTINg CONTROLS

• LX network segment terminator

• DIN Rail Mounting




TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


LXBASM Building Automation ProtoNodeLX SERIES NETWORKED LIgHTINg CONTROLS

The Hubbell Building Automation ProtoNode is an external, high performance, low

cost Building Automation multi-protocol gateway for providing control and access

to Hubbell Building Automation’s LX Network Lighting Control Panel system. The

device provides protocol translation between LX systems and BAS/BMS services

using BACnet®, Metasys® N2 by JCI, and Modbus.

ProtoNode is designed to be used in facilities that need to quickly and easily enable

their LX Lighting Control Panels and Devices to interface with other protocols. The

ProtoNode device is pre-configured with LX system protocol interface and allows

the user to field select BAS system protocols including Modbus RTU, Modbus TCP,

BACnet/IP, BACnet MS/TP or JCI Metasys N2OPEN.

PRODUCT fEATURES

• Web browser based integration programming

• Device is field selectable for specific BAS protocol

• Sophisticated user account/password manager

• Integrates LX lighting control systems and Building Automation Systems (BAS)

• Supports BACnet®, Metasys® N2 by JCI, Modbus™ and LonWorks® protocols

• Automatically generates all required control points and documentation

for integration with the selected protocol

• Five-year limited warranty 4.52”

3.25”

1.6”

NETWORK


MODELlXbaSM LX Building Automation Interface, Universal Control

with Power Supply

Metasys® is a registered trademark of Johnson Controls, Inc.LonWorks® is a registered trademark of Echelon Corp.BACnet® is a registered trademark of ASHRAE



Supported Serial (RS-485) Protocols BACnet MS/TP Modbus RTU

Supported Ethernet Protocols BACnet IP Modbus TCP/IP JCI Metasys® N2OPEN

Supported Electrical Connections (1) 6 pin Phoenix Connector (1) RS-485 +/- Ground port Power +/- Frame Ground port (1) Ethernet -10/100 Ethernet port (1) FTT-10 LonWorks® port (LonWorks® Version)

Power Requirements 9-30 VDC or 12-24VAC Current draw @ 12V = 240 mA

Operating Environment Indoor use only -40°C to 75°C (-40°F to 167°F) Relative humidity (non-condensing): 5% to 90%

Dimensions 4.52”L x 3.25”W x 1.60”H

Approvals BACnet Testing Labs (BTL) B-ASC LonMark 3.4 Certified TUV approved to UL 916 standard and CSA C22-2 RoHS Compliant OPC Self Certified to Compliance CE Mark


lXbaSM


LXJNSYS

LX JENEsysTM

LX SERIES NETWORKED LIgHTINg CONTROLS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

PRODUCT fEATURES

NETWORK

LX JENEsys provides a simple and easy-to-use interface to the LX Networked

Lighting Control System via Personal Computer. The LX JENEsys allows any PC

with an Internet Explorer compatible browser to interface with the LX JENEsys

lighting control system through a built-in web server. The LX JENEsys provides

an easy-to-use and highly intuitive graphical user interface (GUI). System users

can easily program, monitor, and control (locally or remotely) all the functions of

the LX lighting controls system conveniently from their PC—all without installing

software.

• Real-time programming and monitoring of the LX lighting control system through your PC

• No software required—built-in web server provides connection via any Internet Explorer®-compatible browser

• Graphical User Interface (GUI) makes programming both intuitive and simple

• Local or remote access via the local network or Internet

• Can connect multiple users at once


• Powered by the revolutionary NiagaraAX Framework®


4.82”

6.25”

2.43”


MODELlXJNSYS LX JENEsys Controller with Management

Software, LON Network Module and Power Supply

lXJNSYS2loN N LX JENEsys Controller with Management Software, LON Integration Support, LON Network Modules and Power Supply



LXSW1 LXSW3

LXSW5

LXSW2

LXSW4 LXSW6

LX Switch Station LX SERIES NETWORKED LIgHTINg CONTROLS

LX Switch Stations are designed for virtually any area. The soft contours of its

architecturally-pleasing design fit easily into any décor. Each switch can be

individually programmed to control a single relay, group of relays, or preset scene.

In addition to flexible switch functionality, LX Switch Stations can be programmed

to be active only during a specific time window. This function allows the switch

station to be automatically secured when they are not being used, which eliminates

the need for lockout key switches and locking covers.

• Attractive, architecturally-pleasing design

• Flexible programming of switch functionality

• Programmable active and inactive times


• FT-10 and LPT-10 versions available


• 1–6 buttons with or without pilot



PRODUCT fEATURES

4.13”

1.13”

1.13”

NETWORK



Network Interface FTT-10 or LPT-10

Programming and Configuration Programmable over a network using the LX Touch Tablet or any other LX programming device

Physical Injection-molded switch plate and switches Fits standard (Decorator style) wall switch plates (not included) Mounts to standard electrical gang box

Electrical LPT-10 version: powered from Link Power Module FTT-10 version: 24 volts AC or DC; .5Amps required

Operating Environment Location: interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative humidity (non-condensing): 10% to 90%

Dimensions 4.13”H x 1.13”D x 1.13”W

Capacities 1–6 buttons

Certifications LonMark 3.3 certified Warranty Five-year limited

NO. Of BUTTONS123456

NETWORK INTERfACE lP Link Power LPT-10 ft FTT-10 24V AC or DC

COLORW WhiteI Ivory

MODELlXSW

EXAMPLE:White 4 Button FT Switch Station: LXSW4FTW

lXSW


LX Switch Stations

Installation Instructions

Hubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com

OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Switch Station.

Precautions• RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical components.• For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instructions.• For indoor use only.• Read and understand all instructions before beginning installation.• USE COPPER CONDUCTOR ONLY.• NOTICE: Do not install if product appears damaged.

Installation1. Prepare the installation site as necessary. Rough-in wall switch boxes and route power supply and LON Network leads as necessary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements.2. Assign Network Address as described in the Assigning Switch Station Network Address Section.3. With power off, connect power supply leads (FT Version only) and LON Network leads to the Switch Station as shown in the Wiring Diagram.4. Apply power to the system and verify that the Switch Station’s Power Indicator LED (reference Switch Station Controls Diagram) is lit.5. Program Switch Station button controls and lighting system functionality as described in the Programming Switch Station Functions Section.

Figure 1:Wiring Diagram

Figure 2: Switch Station Controls Diagram

Assigning Switch Station Network AddressThe Switch Station network address is set via three rotary dials located under the Switch Station facia (face cover) as shown in the Switch Station Controls Diagram. Each Switch Station is factory set to address 001 prior to shipping. For LX-only networks, each Switch Station on the network will need to be assigned a unique network address. Addresses must be assigned in sequential order starting with address 001. For LonWorks Open System Networks, each Switch Station on the network must be programmed for LonMARK Mode. Address dial settings have no effect in LonMARK Mode.

To set the Switch Station Address, carefully remove the Switch Sta-tion facia (front cover) to gain access to the address controls. Insert a small blade screwdriver into the facia catch release as shown in the Facia Removal Diagram and gently snap it loose at the top edge. Remove the facia along with any buttons that obscure the three rotary dials as shown in the Switch Station Controls Diagram. Rotate the appropriate dial(s) with the small, blade screwdriver till the indica-tor points to the appropriate number. Assign each Switch Station its address as delineated in the project plans as applicable. Dial “A” sets the most signifi cant digit of the network address and Dial “C” sets the least signifi cant digit of the network address. For example, address 001 is set by Dial A = “0”, Dial B = “0” and Dial C = “1”.

LX Switch Stations

Installation Instructions

Hubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com

OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Switch Station.

Precautions• RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical components.• For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instructions.• For indoor use only.• Read and understand all instructions before beginning installation.• USE COPPER CONDUCTOR ONLY.• NOTICE: Do not install if product appears damaged.

Installation1. Prepare the installation site as necessary. Rough-in wall switch boxes and route power supply and LON Network leads as necessary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements.2. Assign Network Address as described in the Assigning Switch Station Network Address Section.3. With power off, connect power supply leads (FT Version only) and LON Network leads to the Switch Station as shown in the Wiring Diagram.4. Apply power to the system and verify that the Switch Station’s Power Indicator LED (reference Switch Station Controls Diagram) is lit.5. Program Switch Station button controls and lighting system functionality as described in the Programming Switch Station Functions Section.

Figure 1:Wiring Diagram

Figure 2: Switch Station Controls Diagram

Assigning Switch Station Network AddressThe Switch Station network address is set via three rotary dials located under the Switch Station facia (face cover) as shown in the Switch Station Controls Diagram. Each Switch Station is factory set to address 001 prior to shipping. For LX-only networks, each Switch Station on the network will need to be assigned a unique network address. Addresses must be assigned in sequential order starting with address 001. For LonWorks Open System Networks, each Switch Station on the network must be programmed for LonMARK Mode. Address dial settings have no effect in LonMARK Mode.

To set the Switch Station Address, carefully remove the Switch Sta-tion facia (front cover) to gain access to the address controls. Insert a small blade screwdriver into the facia catch release as shown in the Facia Removal Diagram and gently snap it loose at the top edge. Remove the facia along with any buttons that obscure the three rotary dials as shown in the Switch Station Controls Diagram. Rotate the appropriate dial(s) with the small, blade screwdriver till the indica-tor points to the appropriate number. Assign each Switch Station its address as delineated in the project plans as applicable. Dial “A” sets the most signifi cant digit of the network address and Dial “C” sets the least signifi cant digit of the network address. For example, address 001 is set by Dial A = “0”, Dial B = “0” and Dial C = “1”.


The LX Keyed Switch Station is designed for use in virtually any space that requires

restricted access to switch functionality. The stainless steel faceplate and secure

barrel-style locking mechanism provide significant tamper and vandal deterrence.

The switch can be individually programmed to control a single relay or group

of relays. In addition to flexible programming of switch functionality, LX Keyed

Switch Stations can be programmed to be active only during a specific time

window, allowing the switch station to be automatically disabled when they are

not required. This provides a second layer of access control.

• Stainless steel face plate with barrel-lock mechanism and pilot light


• Programmable Active & Inactive times

• Topology-Free, Polarity-Insensitive, 2-wire communication

• Mounts in standard single-gang box


LXKEY

Keyed Switch StationLX SERIES NETWORKED LIgHTINg CONTROLS


4.5” 4.13”

2.75”

1.13”

1.13”

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


NETWORK INTERfACElP

COLORblaNk Stainless Steel2

MODELlXkEY1

NOTES:1. LXKEY is available with 1 keyswitch only and "LP" Link Power only.2. LXKEY available in Stainless Steel only (not available in white or ivory).

lXkEY lP



Network Interface LPT-10

Programming and Configuration Programmed over network using the LX Touch Tablet or any other LX programming device

Physical Stainless steel faceplate Barrel-style locking switch mechanism Mounts to standard electrical gang box

Electrical LPT-10: Powered from Link Power Module

Dimensions Switch Station: 4.13”H x 1.13”W x 1.13”D Face Plate: 4.5”H x 2.75”W

Operating Environment Location: Interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative Humidity: 10% to 90% non-condensing


LX Keyed Switch Station - LXKEYILP

Installation InstructionsHubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com

OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Keyed Switch Station.

Precautions • RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical compo-nents. • For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instructions. • Indoor use only. • Read and understand all instructions before beginning installation. • USE COPPER CONDUCTOR ONLY. • NOTICE: Do not install if product appears damaged.

Installation 1. Prepare the installation site as necessary. Rough-in wall switch boxes and route LON Network leads as necessary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements. 2. Assign Network Address as described in the Assigning Switch Sta-tion Network Address Section. 3. With the Link Power supply off, connect LON Network leads to the Switch Station as shown in the Wiring Diagram, Figure 1. 4. Attach wire connector from key switch on switch station cover to the connector on the circuit board as shown in Figure 2. The connec-tor is not polarized and can be inserted in either direction.5. Use the supplied screws to attach the stainless steel cover and the device in the wall switch box at the same time.6. Apply Link Power to the system and verify that the Switch Station is powered. The green LED will light when the key is turned to the ON position.7. Program Switch Station button controls and lighting system func-tionality as described in the Programming Switch Station Functions Section.

Figure 1: Wiring Diagram

Figure 2: Keyed Switch Station Controls Diagram

LX Keyed Switch Station - LXKEYILP

Installation InstructionsHubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com

OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Keyed Switch Station.

Precautions • RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical compo-nents. • For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instructions. • Indoor use only. • Read and understand all instructions before beginning installation. • USE COPPER CONDUCTOR ONLY. • NOTICE: Do not install if product appears damaged.

Installation 1. Prepare the installation site as necessary. Rough-in wall switch boxes and route LON Network leads as necessary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements. 2. Assign Network Address as described in the Assigning Switch Sta-tion Network Address Section. 3. With the Link Power supply off, connect LON Network leads to the Switch Station as shown in the Wiring Diagram, Figure 1. 4. Attach wire connector from key switch on switch station cover to the connector on the circuit board as shown in Figure 2. The connec-tor is not polarized and can be inserted in either direction.5. Use the supplied screws to attach the stainless steel cover and the device in the wall switch box at the same time.6. Apply Link Power to the system and verify that the Switch Station is powered. The green LED will light when the key is turned to the ON position.7. Program Switch Station button controls and lighting system func-tionality as described in the Programming Switch Station Functions Section.

Figure 1: Wiring Diagram

Figure 2: Keyed Switch Station Controls Diagram


LXOMDT2000

LXOMNI™ Dual Technology Occupancy Sensor LX SERIES NETWORKED LIgHTINg CONTROLS

PRODUCT fEATURES



• IntelliDAPT self-adaptive technology - no manual adjustment required



• 2,000 square-foot coverage area (depending on model)



• LonMark® certified



SENSINGNETWORK

The LX Occupancy Sensor is a LonMark ® certified device that represents the

state-of-the-art in sensor technology, combining both ultrasonic (US) and passive

infrared (PIR) technologies for unequaled occupancy detection and false trip

immunity. Both FT-10 and LPT-10 versions are available.

The LX Occupancy Sensor features Hubbell Building Automation’s patented





1.5”

PIR Sensor

4.5”

UltrasonicSensor

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


MODELlX

lX

DEVICE TYPEoMdt 2000

NETWORK INTERFACElPft




LED Lamp Red- infrared motion Green- ultrasonic detection

Time Delay Automatic mode: 8–30 min. (self-adjusts based on occupancy) Manual mode: 2-30 min. Test mode: 8 seconds (for an easy check at installation)

Ultrasonic (US) Output 32kHz


Programming and Configuration LX mode- programed over network using LX Touch Tabley, JENEsysTM


Power Requirements LP Version requires 42VDC, (Provided by the LXLPM2) ; FT Version requires 24VDC, (Provided by the LXPWRSPLY)


Construction Casing- rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors



Weight 5.0 oz

Color Off-white

Mounting Mounting base provided Recommended MAX mounting height: 8ft with a max mounting height of 12ft

Certifications LonMark 3.3 certified

UL and cUL listed


32' 23'

64'45'

12'22'

IR Minor Motion

IR Major Motion

US Minor Motion

US Major Motion


oMdt 2000


LXPSPCO LXPCPCSLXPSPCI

LXPSCM

The LX Photo Sensor and Control Module provides a convenient method of turning

lighting circuits on and off in response to natural light. With 6 individually programmable

on and off set points, this device can control multiple lighting circuits to respond to

different natural lighting levels. This eliminates the need for multiple photosensors.

Real-time photometric information is transmitted over the LX network and displays on

either the LX tablet (or another programming device connected to the network). Each of

the 6 set points can be programmed to control a single relay, group of relays, or preset

scene. For added control, the LX Photo Sensor Control Module can be programmed to

be active or inactive during a specific time window.

LX Photo Sensor and Control ModuleLX SERIES NETWORKED LIgHTINg CONTROLS

• Turns lighting on and off based on available natural light

• Network-based photosensor control module

• Real-time foot-candle levels transmitted over a network on demand to a tablet

• 3 available sensor heads - Indoor, Outdoor, and Skylight/Atrium

• 0-1,000 foot-candle range with 1 foot-candle resolution

• 6 programmable on and off set points





• Mounts to standard DIN Rail



DAYLIGHTHARVESTING

3.75”

6.25”

1.5”

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


LonWorks ® is a registered trademark of Echelon Corporation.LonMark ® is a registered trademark of LonMark International.

MODELlXPS

lXPS cM

DEVICE TYPEcM

NETWORK INTERFACElPft

NotE: 1. LXPSCM Photo Sensor Control Module Support only one (1) Photo Sensor head. Photo Sensor head is ordered separately.



Programmable Functionality Each on and off set point can be programmed to control a single relay, group of relays, or preset scene Active and inactive times

Programming Programmable over a network using the LX Touch Tablet

Capacities 6 programmable on and off set points with adjustable deadband

Photocell Ranges 0–1,000 foot-candle range with 1 foot-candle resolution

Electrical LXPSCMLP: Powered from the Link Power network LXPSCMFT: 16–30 Volts AC or DC; .5 Amps required

Operating Environment Indoor use only (Except LXPSPCO) Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%

Dimensions 6.25”L x 3.75”H x 1.5”W

Weight 6.0 oz.

Color Photo Sensor Control Module—black Photo Sensor Photocells—white

Mounting Mounts to a 35mm DIN rail




MODELlXPS

lXPSP

DEVICE TYPEPcI PHOTOCELL INDOOR

Pco PHOTOCELL OUTDOOR

PcS PHOTOCELL SKYLIGHT / ATRIUM

control Module

Photo Sensor


LXDCIMFT

LX Dry Contact Interface ModuleLX SERIES NETWORKED LIGHTING CONTROLS

The LX Dry Contact Interface Module provides a simple method of incorporating

standard dry contact inputs into the LX lighting control system. This device can

incorporate dry contact closures from building automation, fire, and security alarm

systems. It can also incorporate virtually any dry contact device (momentary or

maintained).

Each of the 6 available inputs can be individually programmed to control a single

relay, group of relays, or preset scene. For added control, the LX Dry Contact Input

Module can be programmed to be active or inactive during specific time windows.

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

PRODUCT FEATURES

• Programmable interface for dry contact devices


• 6 individual dry contact inputs with or without pilots

• Accommodates 2- and 3-wire devices (momentary or maintained)




• Mounts to standard DIN rail


NETWORK

3.75”

6.25”

24V Supply Input

Contact Input Ports


MODELlX

lX dcIM ft

DEvICE TYPEdcIM1

NETWORK INTERfACEft

NOTE: 1. FT ONLY.


Network Interface FTT-10

Programmable Functionality Maintained contact switch input: - toggle, on only, off only Momentary contact switch input: - push button toggle, on only, off only Preset Timed on

Programming Programmable over a network using the LX Touch Tablet

Capacities Maximum of 6 momentary or maintained switches (2- or 3-wire)

Electrical 16–30 Volts AC or DC; .5 Amps required



Weight 6.0 oz

Color Black

Mounting Mounts to a 35mm DIN rail




Use 2, 3, or 4-conductor, 20AWG non-shielded cable as appropriate. 1000ft. maximum length.

24V DC Power SupplyUse LXPWRSLPY

LON Network Interface


The Hubbell Building Automation Line V Automatic Line Voltage Switches

provide feature cost effective lighting control for maximum energy savings. The

switches operate based on timed blink patterns from the LX Panels to activate

internal relays ON, OFF or override an impending OFF schedule for user selectable

periods of 30, 60, 90, or 120 minutes. The LX Panels are designed to control the

relay timed blinks to allow for a single relay to signal multiple Line V switches to

perform the desired functions.

The 1-Relay version has standard capability to be wired to addition switches for

3-way and 4-way operation on a single zone. The 2-Relay version allows for bi-level

switching within a single zone. Signal ON can be selected for 1 or 2 relays.

• Two switch configurations – 1-Relay and 2-relay

• 1-Relay model controls a single zone or can be connected for 3-way

and 4-way operation

• 2-Relay model provides single circuit input for dual level area control

• Switches are controlled ON or OFF from the LX Panel using OFF intervals

from a single relay

• Allows for retrofit of standard line voltage toggle switches for automatic

schedule ON/OFF control

• Blink warning allows user to initiate override of 30, 60, 90, or 120 minutes and

cancel OFF event

• Switches operate without the need for a neutral connection




• ETL, UL, and cUL listed



PRODUCT fEATURES

LINEVAS1BUNVWH LINEVAS2BUNVWH

LX Line v Automatic Line voltage Switches

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

LX SERIES NETWORKED LIgHTINg CONTROLS

4.29”

2.1”

1.8”



Programming and Configuration Programmable via DIP switches mounted on door All control functions are issued at the switch

Relays Configurations 1-Relay – Single Zone OR 3-Way/4-Way operation 2-Relays – Single circuit input for Bi-Level Control


Electrical Ratings 120VAC: 5.0 Amps Tungsten; 10.0 Amps Fluorescent; 1/3 HP 277VAC: 10.0 Amps Fluorescent; 1/6 HP


Operating Environment Indoor use only Operating temperature: 32°–104°F (0°–40°C) Relative humidity (non-condensing): 0%–95%

Construction Casing—high-impact injection-molded plastic (UL-94-5V) Color-coded leads are 6” long


Weight 2.9 oz.



Certifications ETL, UL, and cUL listed


lINEVaS1buNVbk Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Black

lINEVaS1buNVgY Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Gray

lINEVaS1buNVIV Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Ivory

lINEVaS1buNVla Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Light Almond

lINEVaS1buNVWH Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way White

lINEVaS2buNVbk Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Black

lINEVaS2buNVgY Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Gray

lINEVaS2buNVIV Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Ivory

lINEVaS2buNVla Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Light Almond

lINEVaS2buNVWH Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single White

ModEl/dEScrIPtIoN



LXLPM2

Hubbell Building Automation’s LX Link Power Module is a self-contained

power supply that provides operating power to LX Series twisted-pair

communication networks.

This module powers a multitude of device types, such as LX switch stations,

LX occupancy sensors, and LX photosensor control modules. The device’s

versatility enables it to support a variety of network topologies, including

Star and T-configurations.

• Power supply for LX Series Link Power-based devices

• Short-circuit and overcurrent monitoring

• Bus termination by switch

• DIN rail mount


LX Link Power ModuleLX SERIES NETWORKED LIgHTINg CONTROLS

120VAC


3.54”

4.96”

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Power Supply Rated input voltage: 120VAC (85-132V) Rated frequency: 50/60 Hz Rated input current: 0.7A

Output to Bus Output voltage: 41.5V; +/-2.2% Residual ripple: <80mV at 10 kHz (200mV at f>200kHz) Output current: 1A (supports approximately 56 LX Series devices) (For larger networks, an additional LX Link Power Module and

LX Router/Repeater Module can be added to expand the LX network)

Overload protection: typical at 1.6A; permanent short circuit proof with pulsing “try of restart”

Connectors Screw terminal


EMC Emission: EN61,000-6-3; class B; EN50090-2-2 Immunity: EN61,000-4-2/3/4/5/6; class A




MODELLXLPM2 LX LINK POWER MODULE

LXLPM2


LXRRM

Hubbell Building Automation’s LX Router/Repeater Module interconnects

multiple LX Series communication-network segments and refreshes the

network signal from one segment to the next thus

increasing the maximum transmission distance.

This module is required for networks where either the network wire length

exceeds the maximum limit (1,500 feet) or there are more than 56 devices

per segment. With the LX Router/Repeater Module, two independently-

powered network segments can share their information while maintaining

each segment’s power system separately.

LX Router/Repeater ModuleLX SERIES NETWORKED LIgHTINg CONTROLS

• Repeater for LX Series networks

• Screw terminal wiring connections

• 16–30VAC or VDC operation

• LonMark™ certified

• UL listed



3.9”

6.3”

1.0”



Processor 2 Neuron 3150® Chips; 10MHz

Service Function Recessed service switch and service (wink) LED. Dual tear-off bar code Neuron ID self-adhesive tag

Channel Type TP/FT-10 to TP/FT-10

Input Power 16–30VAC or DC @ 24VA Requires a separate power supply (the LXPWRSPLY)

Mounting DIN Rail

Operating Environment -40° to 185°F (-40° to 85°C) Relative humidity (non-condensing): 10% to 95%


Certifications UL 916; FCC A; CE Mark


MODELlXrrM LX Repeater

lXrrM



LXPWRSPLY

Hubbell Building Automation’s LX Power Supply provides power to

free topology(FT)-based LX Series devices. The 30W, single-output,

Class 2, DIN rail power supply can power LX switch stations, LX

occupancy sensors, LX photosensor control modules, and LX dry contact

interface modules.

This power supply also features an LED indicator for power-on status and

short-circuit, overload, and overvoltage protection support.

• Universal AC input 120VAC (100–240V); line and neutral single phase only

• DIN rail mountable: TS35/7.5; TS35/15

• Protection: short circuit, overload, and over-voltage

• LED indicator for power on

• UL listed


24VDC

LOW

VOLTAGE


3.5”

3.0”

LX Power SupplyLX SERIES NETWORKED LIgHTINg CONTROLS

2.5”

120VAC


MODELlXPWrSPlY LX Power Supply

lXPWrSPlY


AC Input Voltage Range 120VAC (100–240V), 50-60HZ Line and Neutral Single Phase only

Output 24V; 0–1.5A

Tolerance +/-1%

Efficiency 83%

DC Adjustment Range Rated output voltage: +/-10%

Overload Protection 105% to 160% constant current limiting; auto-recovery

Over-voltage Protection Rated output voltage: 115% to 135%

Setup; Rise; Hold-up Time 100ms, 70ms, 100ms at full load and 132VAC

Withstand Voltage I/P-O/P:3KVAC

Connection I/P: 2 poles O/P: 4 poles screw DIN terminal


Operating Environment -4° to 22°F (-20°to 50°C) @100% load 140° F (60° C) @ 80% load

Certifications UL60950-1; TUV EN60950-1

EMC EN55022 class B; EN61,000-3-2,3; EN61,000-6-2; EN61,000- 4-2,3,4,5,6,8,11; ENV50204; EN61204-3




• NEMA 1 rated metal enclosure

• Screw-mount cover

• Includes 2 DIN rails


Dimensions 12”H x 15”L x 4”W

Weight 11 lbs.

NEMA 1 Rated Provides a degree of protection for people against contact with the enclosed devices Provides a degree of protection for the enclosed devices against falling dirt


ModEllXENdM LX Enclosure for DIN Rail

Device Modules

LXENDM

lXENdM

LX Enclosure for DIN Rail ModulesLX SERIES NETWORKED LIgHTINg CONTROLS

Hubbell Building Automation’s LX Enclosure for DIN Rail Modules is designed to

enclose our DIN rail-mountable devices and power supplies. The surface-mount

metal enclosure is NEMA 1 rated and is suitable for dry indoor locations, such as

electrical rooms and closets. The enclosure also comes with a screw-mount cover

and 2 DIN rails that can be mounted in multiple ways.

PRODUCT fEATURES



general SpecificationsEach Kit Includes: 2 ea - Wire Way Divider Plates 2 ea - Stainless Steel mounting Screws Installation Instructions

Operating Environment Indoor use only

Dimensions 4.25”W x 3.25”L

Weight 3.0 oz.

Color ANSI 61 Gray Polyester Powder Coat

Certifications For use with LX Series UL and cUL Listed LXIN and LXEN network lighting control panels (except LXEN04)


MODELlXWrdV Wire Way Divider Kit for LX

Series Relay Panels

lXWrdV

Panel Wire Way Divider Accessory KitLX SERIES NETWORKED LIgHTINg CONTROLS

Hubbell Building Automation’s LXWRDV Panel Wire Way Divider Accessory Kit provides

the ability to place a physical barrier in the line voltage wire’s way to separate different

voltages or sources. This accessory is field-installed and ordered separately. Each kit

includes two code-gauge steel divider plates and mounting hard-ware. Dividers are

easily installed between relays and therefore

do not consume any relay spaces.

• Provides physical code-gauge steel separation between different voltages or sources that share the same relay panel

• Field-installed

• Can be mounted at any location

• Fits between relates – no loss of relay spaces

• For use with LX Series Lighting Control Panels (Except 4 relay LX panels)

PRODUCT fEATURES



BELDEN 8471

PVC Jacket(Unsheilded)

Twisted Pair #16 Tinned Copper Conductors, PVC Insulation

lX SYStEM NEtWork cablE rEQuIrEMENtSHubbell Building Automation’s LX Lighting Control System requires the use of Belden #8471 cable for Riser Rated applications

OR Windy City Wire #104500 for Plenum Rated applications. These are the ONLY cables that can be used for network wiring with

the LX System.

The use of substitute cables based on similar physical characteristics is not allowed and will VOID any HBA warranty for the LX

system or any LX component connected to the substitute cable.

Riser Rated Belden 8471 CableLX SERIES NETWORKED LIgHTINg CONTROLS

Hubbell Building Automation’s LX network cable is used to interconnect LX

Panels, LX Devices and LX Accessories for a complete communications network.

All devices that communicate on the LX Network are connected with the same

type of twisted pair cable. Both power and data are carried over the same two

wires. The LX System is wired as a topology-free, polarity-insensitive network. HBA

supplied LX Network Cables assure proper network communications and should

be specified and installed on all LX System projects.

PRODUCT fEATURES

• Interconnects LX Lighting Control Panels and LX network devices

• Cable carries both power and data in a single twisted pair

• Belden #8471 - twisted pair #16 tinned copper

• Single cable type connects to all types of LX network devices

• Echelon Guideline Compliant for LON networks

• Available in 100 ft and 500 ft reels

• Riser Rated

• Connects to terminal blocks or with twist on connectors

• UL and cUL Listed

• One-year limited warranty


INStallatIoN NotES

1. DO NOT exceed 1500 feet of cable OR connect more than 56 devices per network segment.

2. Each network segment using LP style devices requires an LXLPM2 Link Power Module for device power. Each additional segment requires an additional LXLPM2 Link Power Module and an LXRRM Repeater for data transmission between segments.

3. Each network segment existing of panels only or that use FT style devices only require termination with LXTERMINATOR instead of LXLPM2 Link Power Module.

4. Run cable and connect network with the shortest distances possible. The most efficient network is wired similar to branch circuit outlets.

5. When using twist-on wire connectors with network cable use no more than three wires per connector.

6. The use of T-taps to minimize cable length is encouraged. Daisy chain topology is allowed, but most often increases overall cable length.

7. DO NOT homerun all devices individually, or leave spare cable at ceiling mounted devices. If devices need to be relocated, cables can be extended with twist-on wire connectors.

8. DO NOT mix plenum and NON-plenum cables on the same segment.

9. Keep 12” minimum from line voltage, do nut run in the same raceway with line voltage.

*All sales are final, no returns are allowed.

MODELlX8471cbl100* LX Cable Belden 8471 Riser Rated 100 ft ReellX8471cbl500* LX Cable Belden 8471 Riser Rated 500 ft Reel


Description 1 pair - 16 AWG stranded tinned copper conductors, PVC Insulation, unshielded twisted pair (UTP), PVC jacket

Shielding Unshielded

Overall Nominal Diameter 0.274 inches

Plenum Rating Not Plenum Rated

Operating Temperature Range -20°C to +80°C (Indoor use only)

Maximum Pulling Tension 61 lbs

Minimum Bend Radius 5.1 inches

Color Pair Color - Black/White, Outer Jacket - Gray

Certifications NEC (UL) CMG, CEC/C (UL) CMG,

Flame Test UL Flame Test – UL1685 FT4 Loading, C (UL) Flame Test FT4

Warranty One-year limited



lX SYStEM NEtWork cablE rEQuIrEMENtSHubbell Building Automation’s LX Lighting Control System requires the use of belden #8471 cable for riser rated applications

or Windy city Wire #104500 for Plenum rated applications. These are the ONLY cables that can be used for network wiring

with the LX System.

The use of substitute cables based on similar physical characteristics is not allowed and will VoId any Hba warranty for the LX

system or any LX component connected to the substitute cable.

Plenum Rated Windy City Wire 104500 CableLX SERIES NETWORKED LIgHTINg CONTROLS

Hubbell Building Automation’s LX network cable is used to interconnect LX Panels, LX Devices and LX Accessories for a complete

communications network. All devices that communicate on the LX Network are connected with the same type of single twisted pair

cable. Both power and data are carried over the same two wires. The LX System is wired as a topology-free,

polarity-insensitive network. HBA supplied LX Network Cables assure proper network communications and should be specified and

installed on all LX System projects.

PRODUCT fEATURES

• Interconnects LX Lighting Control Panels and LX network devices

• Cable carries both power and data in a single twisted pair

• Windy City Wire #104500 - twisted pair #16 tinned copper

• Single cable type connects to all types of LX network devices

• Echelon Guideline Compliant for LON networks

• Available in 100 ft and 500 ft reels

• Plenum Rated

• Connects to terminal blocks or with twist on connectors

• UL and cUL Listed

• One-year limited warranty


INStallatIoN NotES

1. DO NOT exceed 1500 feet of cable OR connect more than 56 devices per network segment.

2. Each network segment using LP style devices requires an LXLPM2 Link Power Module for device power. Each additional segment requires an additional LXLPM2 Link Power Module and an LXRRM Repeater for data transmission between segments.

3. Each network segment existing of panels only or that use FT style devices only require termination with LXTERMINATOR instead of LXLPM2 Link Power Module.

4. Run cable and connect network with the shortest distances possible. The most efficient network is wired similar to branch circuit outlets.

5. When using twist-on wire connectors with network cable use no more than three wires per connector.

6. The use of T-taps to minimize cable length is encouraged. Daisy chain topology is allowed, but most often increases overall cable length.

7. DO NOT homerun all devices individually, or leave spare cable at ceiling mounted devices. If devices need to be relocated, cables can be extended with twist-on wire connectors.

8. DO NOT mix plenum and NON-plenum cables on the same segment.

9. Keep 12” minimum from line voltage, do nut run in the same raceway with line voltage.

*All sales are final, no returns are allowed.



Description 1 pair - 16 AWG stranded tinned copper conductors, PVC Insulation, unshielded twisted pair (UTP), PVC jacket

Shielding Unshielded

Overall Nominal Diameter 0.182 inches

Plenum Rating Plenum Rated

Operating Temperature Range 0°C to +75°C (Indoor use only)

Maximum Pulling Tension 61 lbs

Minimum Bend Radius 5.1 inches

Color Pair Color - Black/White, Outer Jacket - White

Certifications NEC (UL) Subject 444 Type CL2P/CMP, CSA (cUL)

Flame Test NFPA 262 Steiner Tunnel Test

Warranty One-year limited

MODELlX104500cbl100* LX Cable Windy City 104500 Plenum Rated 100 ft ReellX104500cbl500* LX Cable Windy City 104500 Plenum Rated 500 ft Reel


SAvE TIME

• Compact single enclosure includes relays,

control functions and input terminals for low

voltage devices.

• All inputs are software assignable to any HBA

low voltage input device including switches,

motion sensors, and photocells.

• Low voltage devices connect directly to panel

without any ancillary parts such as power packs.

• LCD user interface incorporates easy to follow

intuitive programming tools.

SAvE ENERgY

• HBA CX Panels meet ASHRAE 90.1, IEEC and

California (CEC) Title 24 energy codes.

• CX Panels contribute to LEED certification

requirements.

• Allows multiple low voltage inputs from HBA

switches, motion sensors, and photocells to

enhance energy savings for scenarios such as

manual switch ON and automatic motion sensor

OFF control.

LOWER COST

• Can save up to 50% in parts and labor cost over

conventional time clock and contactor systems.

• Lowers energy consumption with expanded

programming options.

• Astronomical clock eliminates the need for roof

mounted photocells.

• Pre-programmed scenarios offer a wide variety

of options to maximize energy savings for each

possible control zone.

INCREASE CONTROL

• Sunrise/sunset controls provided using internal

astronomical clock.

• Scenarios offer many easy to use control

combinations.

• Priorities and masking allow for personalized

control solutions.

• Dimming option for most 0-10V ballasts and

LED drivers

Affordable Switching and Dimming

CX Panels provide feature rich and cost effective lighting control for maximum

energy savings. You can save up to 50% in labor and materials when used

in place of conventional time clock and contactor combinations. The use of

the Astronomical Clock in place of roof mounted photocells increases cost

savings, lowers maintenance, and improves reliability.


Auxiliary Inputs

Individual Mounted Relay Card

CX 8-Relay Panel Interior

CX Dimming Card

Dry Contact Outputs

auxiliary Input features• Provisions for multiple device

control of a single relay or group.

• Scenarios program allows for easy mapping of auxiliary inputs.

dry contact output features• Normally open or normally closed

output.• Momentary or maintained.• Allows for interconnection to other

building functions such as security, fire alarm, or building management system.

relay card features• 1-pole and 2-pole relays fit in the

same sized space.• Relay self-identifies once installed.• Available 20A/1P N/O, 20A/2P N/O

or N/C and 30A/1P latching.• 14K SCCR for 20A/1P N/O, 20A/2P

N/O or N/C.• 18K SCCR for 30A/1P latching.

cX dimming card features• Full range dimming with preset

dimming levels.• Ramp Up, Fade Down, Minimum

Dim Level.• Max Dim Level (Demand Response

System Settings)• Operates with 0-10V dimmable

ballasts.• Provides manual and automatic

control of dimming levels.• 8 Dimming channels per card.• Works with CAT5 switches.

The CX Series panels are self-contained lighting control systems. All inputs are low voltage and hard-wired to terminal blocks in the panel. Input power supply is multi-tapped or universal for typical service voltages. Line voltage terminals are located with generous space for easy connection.


The Hubbell Building Automation CX Commercial Lighting Control Panels provide

feature-rich and cost-effective lighting control for maximum energy savings.

The LCD User interface is located in the door and utilizes simple and intuitive

scrolling menus to program, check status or update the panel. The easy-to-use

Pre-Programmed Scenarios Menu makes project commissioning simple and fast.

The CX Panels can save up to 50% in labor and materials when used in place of

conventional time clock and contactor combinations. The use of the astronomical

clock instead of roof-mounted photocells increases cost savings, lowers

maintenance, and improves reliability.

PRODUCT fEATURES

• Four Relay panel sizes – 4, 8, 16 and 24 relay spaces

• Relays – 20A/1P, N/O, 20A/2P, N/O (14K SSCR)

and 30A/1P latching (18K SCCR)

• Optional 0-10V Dimming

• LCD user interface with keypad

• 365 day programming with 64 schedules

• Astronomical and real time clock

• 6 programmable dry contact inputs for 4 relay panel

12 Programmable dry contact inputs for 8 relay panel

20 Programmable dry contact inputs for 16 relay panel

30 programmable dry contact inputs for 24 relay panel

• Selectable pre-programmed scenarios

• Programmable inputs accept low voltage switches, photocells,

or motion sensors

• Two low voltage dry contact output relays on 8, 16 and 24 relay panel

• Program uploads via removable SD memory card

• Listed to UL916, UL924 and cUL

• Five -year limited warranty

CX Lighting Control PanelsCX COMMERCIAL LIgHTINg CONTROL PANELS

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

CX16 and CX2416- and 24-Relay Panels

CX04 and CX084- and 8-Relay Panels


MODELcX CX Lighting

Control Panel

SPACES04 4 Relay

Spaces08 8 Relay

Spaces16 16 Relay

Spaces24 24 Relay

Spaces

INPUT vOLTAgE2 120/277V

Universal

3 347/480V

ENCLOSURES NEMA 1

Surface

RELAY QUANTITY00

04

08

16

24

No Relays - Spaces Only

4 Relays Installed

8 Relays Installed

16 Relays Installed

24 Relays Installed

RELAY TYPESP Space Only2N 20A

Electrically Held N/O 120-277V

3l Latching120-277-347V

tN 20A Electrically HeldN/O 208-480V

OPTIONSN Stand Alone

Panel

M Master Panel

S Secondary Panel (Note 4 & 5)

cX


Programming and Configuration Programmable via user interface mounted on door Fully programmable by users with door closed and locked Stand Alone, Master, or Secondary Panels. One Master and one Secondary may be connected as a system

Physical NEMA 1 surface enclosure Pre-drilled mounting holes for mounting to wall, KOs provided on top and bottom 4/8 relay and 16/24 relay enclosures with hinged locking door

Electrical Input 120/208/240/277VAC for 4/8 size 120-277VAC Universal for 16/24 size Standard 120/277/347 Optional

Operating Environment Location: NEMA 1 interior space Operating temperature: 0° to 50°C (32° to 112°F) Relative humidity (non-condensing): 10% to 90%

Certifications Listed to UL916, UL924 and cUL

Warranty Five-years limited


S

NOTES:

1. Required for CX04 Series Panels. Not Available for CX08, CX16, CX 24

2. Not available for CX04.

3. 2-Pole relays take the same amount of space as 1-Pole relays.

4. Installed relays must be all of the same type. Relay Type TC and 2C not available in fully populate panels

5. “00” option has no relays, all must be ordered separately and installed in the field.

6. Secondary panel includes (2) master/secondary panel interface cards.

CX04 and CX08 4- and 8-Relay Panels14.5” W x 17”H x 4” D

CX16 and CX24 16- and 24-Relay Panels20” W x 24”H x 4” D


CXR2N 20A/1P Relay

CXR3L 30A/1P Relay

CX RelaysCX LIgHTINg CONTROL PANELS

PRODUCT fEATURES

The CX Panels have four types of available CXR relays. Each relay is individually

board-mounted and can be installed in any combination in the panel. Relays are

offered in a variety of types and ratings to meet any project requirements. Types

include electrically-held normally open (N/O), electrically-held normally closed

(N/C), and latching.

Ratings are 20A/1P 20A/2P, and 30A/1P. Pre-Configured Panels are available

with relays of the same type. Combinations of any relay type must be ordered

separately and field installed into Space Only standard panels. CXRTN & CXRTC 20A/2P Relays

• Relays are mounted to individual relay cards

• Four types of relays – 20A/1P, N/O and 20A/2P, N/O, N/C (14K SCCR) and

30A 1P latching (18K SCCR)

• Smart Relay card self-identifies type automatically to panel

• Each relay includes 1 programmable input for low voltage switches,

photocells, or motion sensors

• Panels are ordered fully populated with the same relay type or with space

only for field installation of relay combinations

• Relay cards include a plugging connector to panel motherboard and

a single screw to secure it to the panel enclosure

• Relay cards include a manual override control button and

LED status indication

• Listed to UL916 standard, UL924 and Canadian cUL

• Five-year warranty1.625”

5.5”


ModEl

cXr

rElaY tYPE2N 20A 1-Pole Electrically Held N.O. 120-277V 14KSCCR @ 277VAC3l 30A 1-Pole Latching 120-277-347V 18KSCCR @ 277VAC, 14KSCCR @ 347VACtN 20A 2-Pole Electrically Held N.O. 480V 14KSCCR @ 480VACtc 20A 2-Pole Electrically Held N.C. 480V 14KSCCR @ 480VAC

cXr

Type Poles VAC Tungsten Flour. Ballast * HID Ballast Motor Rating120 15A 16A 20A 1 HP227 NA 16A 20A 3/4 HP120 20A 30A 30A 1 HP277 NA 30A 30A NA347 NA 20A 20A NA 14K Amps

CXRTN - Elect Held, N.O. 2 480 NA 20A 20A 2 HPCXRTC - Elec Held, N.C. 2 480 NA 20A 20A 2HP

14K Amps

18K Amps

14K Amps

CXR3L- Latching 1

* Electronic Flourescent Ballast Rating is 16A

Characteristics Load Ratings SCCR Rating

CXR2N- Elec Held , N.O 1



Physical Mounts inside NEMA 1 surface panel enclosure Pre-drilled mounting hole for securing relay cards Individual relay cards – 1P and 2P are equal in size

Operating Environment Location: interior space Operating temperature: 0°–50°C (32°–112°F) Relative humidity (non-condensing): 10%–90%

Certifications Certified to UL 916, UL 924 and cUL


relay Specifications

†

†

† Suitable for use at 208V, 240V and 480V


CX Dimming Option Card

The CX Dimming Option Card provides 0-10V dimming through any HBA

CX Lighting Control Panel. This provides a low cost solution for lighting control

challenges such as more stringent energy codes, demand response requirements,

and LEED qualification while providing additional energy saving capabilities

through the use of full range dimming.

The CX Dimming Option Card provides 0-10V dimming control for LED electronic

dimming drivers and fluorescent electronic dimming ballasts. The Dimming

Channels may be configured to work in concert with Photo Cells, Occupancy

Sensors and Schedules in addition to manual Raise Lower Switches.

PRODUCT fEATURES

• Full range dimming with Preset dimming levels

• Ramp Up, Fade Down, Minimum Dim Level

• Max Dim Level (Demand Response System Settings)

• Operates with 0-10V drivers and dimmable ballasts

• Provides manual and automatic control of dimming levels

CXDIMCONTRBD


Power Requirements Low Voltage via CX Panel Option Port

Output (Low Voltage Sensors) Eight 0-10V Dimming Channels 0-10V Screw terminals. #16 solid or stranded copper wire. 0-10V output 30mA per channel Four RJ45 Connections for discrete RJ45 Zone 5 Switches

Panel Dimming Option Card Capacity CX04/CX08 1 CX Dimming Option Card CX16 Up to 2 CX Dimming Options Cards

CX24 Up to 3 CX Dimming Option Cards

User Interface LCD Color Display via CX Panel Supports Zone 5 RJ45 Switches


cXdIMcoNtrbd

MODELCXDIMCONTRBD CX Panel 8-Channel

Dimming Controller Option Board


• Upgrade option to Existing and New CX Panels

• 8 Dimming Channels per card

• Works with Zone5 Switches


CX LIgHTINg CONTROL PANELS

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Electrical Ratings Each switch: 100mA @ 30VDC Max Each pilot LED: 18-30VDC, internal 2.2kohm, ½ Watt resistor

Configurations 1 - 4 buttons, with or without pilot LED Momentary or latching (sustained)


Construction Housing – Rugged, high-impact, injection-molded plastic Color-coded leads


Weight 3.0 oz

Color White, Ivory, Light Almond, Gray



LVSM1NP LVSM1PL

MODELlVS

lVS

SWITCH TYPEM Momentaryl Latching

PILOTPl w/ Pilot LEDSNP No Pilot

NUMBER Of BUTTONS 12

3

4

COLORWH White

IV Ivory

la Light Almond

g Gray

Hubbell Building Automation’s CX Low Voltage Wall Switches are designed

for virtually any area. The soft contours of its architecturally pleasing design fit

easily into any décor. Switches are available in both momentary and latching

versions and feature multiple button configurations making them the perfect

switch solution for use with HBA’s CX Commercial Lighting Control Panels.

PRODUCT fEATURES


• Momentary and latching versions available

• 1-4 buttons with or without LED


• Title 24 compliant when used as part of compliant system



24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

CX Low voltage SwitchesCX LIgHTINg CONTROL PANELS


LUXSTATLS

CX Light Sensor

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

24VDC

LOW

VOLTAGE

The CX Light Sensor by Servodan provides the necessary daylight-level information

to the CX Panel System. Using a photodiode element, this sensor continuously

measures daylight levels and sends the information to the selected Luxstat daylight

harvesting control module. In order to operate as a true Open Loop controller, the

sensor must be positioned to see only daylight (no artificial light). You select the

applicable foot-candle range by using a jumper beneath the front cover.

PRODUCT fEATURES

• Daylight sensor for CX Panel Systems


• Indoor and outdoor versions


• Foot-candle range: 3-6,000 fc





DAYLIGHTHARVESTING

2”

1.2”

CX LIgHTINg CONTROL PANELS


MODELluXStatlS Luxstat Light Sensor - Indoor

luXStatlSo Luxstat Light Sensor - Outdoor



Electrical Four jumper-selectable foot-candle ranges: .03-30FC; 3-300FC; 30-3,000FC; 60-6,000FC 24VDC Low Votage Class 2 Device 3-conductor 22 AWG twisted cable—equal to Belden 8443


Dimension 2”DIA x 1.2”H

Weight 0.5 oz



45º

30º

30º


The Hubbell Building Automation Line V Automatic Line Voltage Switches

provide feature cost effective lighting control for maximum energy savings. The

switches operate based on timed blink patterns from the CX or LX Panels to

activate internal relays ON, OFF or override an impending OFF schedule for user

selectable periods of 30, 60, 90, or 120 minutes. The CX or LX Panels are designed

to control the relay timed blinks to allow for a single relay to

signal multiple Line V switches to perform the desired functions.

The 1-Relay version has standard capability to be wired to addition switches for

3-way and 4-way operation on a single zone. The 2-Relay version allows for bi-level

switching within a single zone. Signal ON can be selected for 1 or 2 relays.

• Two switch configurations – 1-Relay and 2-relay

• 1-Relay model controls a single zone or can be connected for 3-way

and 4-way operation

• 2-Relay model provides single circuit input for dual level area control

• Switches are controlled ON or OFF from the CX Panel using OFF intervals

from a single relay

• Allows for retrofit of standard line voltage toggle switches for automatic

schedule ON/OFF control

• Blink warning allows user to initiate override of 30, 60, 90, or 120 minutes and

cancel OFF event

• Switches operate without the need for a neutral connection




• ETL, UL, and cUL listed



PRODUCT fEATURES

LINEVAS1BUNVWH LINEVAS2BUNVWH

CX Line v Automatic Line voltage SwitchesCX LIgHTINg CONTROL PANELS

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

4.29”

2.1”

1.8”



Programming and Configuration Programmable via DIP switches mounted on door All control functions are issued at the switch

Relays Configurations 1-Relay – Single Zone OR 3-Way/4-Way operation 2-Relays – Single circuit input for Bi-Level Control


Electrical Ratings 120VAC: 5.0 Amps Tungsten; 10.0 Amps Fluoresent; 1/3 HP 277VAC: 10.0 Amps Fluorescent; 1/6 HP


Operating Environment Indoor use only Operating temperature: 32°–104°F (0°–40°C) Relative humidity (non-condensing): 0%–95%

Construction Casing—high-impact injection-molded plastic (UL-94-5V) Color-coded leads are 6” long

Dimensions 4.2”L x 1.8”D x 2.1”W; .37” extension

Weight 2.9 oz.



Certifications ETL, UL, and cUL listed


lINEVaS1buNVbk Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Black

lINEVaS1buNVgY Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Gray

lINEVaS1buNVIV Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Ivory

lINEVaS1buNVla Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Light Almond

lINEVaS1buNVWH Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way White

lINEVaS2buNVbk Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Black

lINEVaS2buNVgY Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Gray

lINEVaS2buNVIV Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Ivory

lINEVaS2buNVla Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Light Almond

lINEVaS2buNVWH Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single White

ModEl/dEScrIPtIoN



LODT

ordErINg INforMatIoN

Consult the Occupancy/Vacancy Section for detailed specifications, application guidelines and product ordering.

OMNIDT2000

The OMNI line of occupancy and vacancy sensors are available in Ultrasonic,

Infrared and Multi-Tech (combines ultrasonic (US) and passive infrared (PIR))

to turn lighting on and off based on occupancy. This family of sensor features






CX Occupancy SensorsCX LIgHTINg CONTROL PANELS

The LightOWLTM Dual Technology Ultrasonic and Passive Infrared Sensor

combines ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on

and off based on occupancy. Designed specifically for areas where ceiling sensors

are not appropriate, this sensor features Hubbell Building Automation’s patented





120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


CX Lighting Control SwitchesCX LIgHTINg CONTROL PANELS

The HBA CX Lighting Control Switches provide manual control. The system

consists of two types of switches – a Dimming Control Switch and a Master On/

Off Control Switch.

The Dimmning Control switches enables users to raise and lowers light levels. The

Master/Row Control switches turn all lighting ON or OFF.

PRODUCT fEATURES


• Raise/ Lower Dimming control

• Master ON/OFF control

• Mount to standard single or multi-gang wall boxes


1.6”

4.2”

1.4”

Z5-SW-MC

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


LIgHTINg CONTROL SWITCHESAND CABLES

Z5-SW-aVd CX Dimming Switch, WhiteZ5-SW-Mc CX Master On/Off Switch, White

Wireless lighting controls

PAgE 152

INTUITIVE NETWORK TECHNOLOGY

• Peer-to-peer: All devices are peers and act as

repeaters, forwarding messages to ensure

message delivery

• Self-organizing: Network automatically builds

itself

• Self-healing: Messages automatically reroute

around failed nodes

NETWORK PROTOCOL

• SNAP (Synapse Network Appliance Protocol)

RADIO FREQUENCY

• 902-928 MHz (robust and reliable) ISM band. FCC

Part 14 Certified

• Spread Spectrum Frequency Hopping

• Supported distance between wireless devices:

100 meters

INTELLIGENT SMARTPORTS

• Plug-and-play support for wiHUBB occupancy

sensors, daylight sensors and switch stations.

• Automatically and intelligently provides the most

energy-efficient operation

SECURITY

• Wired: HTTPS/SSL – The wiHUBB Access Point

connects the client browser and wiHUBB network

using Secure Socket Layer (SSL) protocol, the

standard for web security authentication.

The wiHUBB® Distributed Lighting Control system wirelessly controls indoor

and outdoor applications including area/site lighting, parking garage lighting,

and interior facility lighting. It is simple to install and configure, and provides a wireless network that can grow and change

with your building’s needs. While installation of wired systems can be complicated and expensive, wiHUBB is simple to use,

requiring minimal installation time and wiring costs. wiHUBB’s future proof design features a self-organizing and self-healing

wireless mesh network.

Wireless Comes to Light®

WIRELESS COMES TO LIgHT®

®

(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 153


WIH-AP

wiHUBB® Access PointWIRELESS LIgHTINg CONTROLS

Hubbell Building Automation’s wiHUBB® Access Point is a user friendly, web-

based device for commissioning and managing up to 100 devices within the

wiHUBB wireless mesh network. The wiHUBB Access Point’s integrated web server

provides access to the wiHUBB network using any standard web browser – no

special client side PC software required.

The intuitive and easy to use Graphical User Interface (GUI) provides building

owners and facility managers with the ability to schedule and control individual

wiHUBB-enabled devices or groups of devices.

PRODUCT fEATURES

• Web-based commissioning and monitoring of the wiHUBB

lighting control system

• Integrated web server provides connection via standard web browsers

• Easy system access from the local network or Internet

• Intuitive and easy-to-use Graphical User Interface (GUI)

• Ability to schedule wiHUBB-enabled devices or groups of devices via

standard or astronomical time functions

• Provides On/Off and dimming control of wiHUBB-enabled devices

and groups of devices

• View power consumption from each device

• Robust & reliable 900Mhz wireless self-organizing and self-healing

mesh network

• FCC certified


5”

7.5”

902 - 928MHzFrequencyAntenna

WIRELESS


®120VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com

ModEl / dEScrIPtIoN

WIH-aP wiHUBB Access Point



wiHUBB Network Size Supports up to 100 wiHUBB devices. For larger network use wiHUBB Access Point 2.0 (WIH-AP2)

Power Requirements 120VAC - Plug-in power adapter included

RF Frequency 902 - 928MHz Wireless Peer-To-Peer, Self-Organizing and Self-Healing Mesh Network Spread Spectrum Frequency Hopping

RF Range Supported distance between wireless devices: 100 meters (328 feet) Maximum Transmission Output Power: +20 dBm Maximum Receive Sensitivity: -118 dBm

Operating Environment Operating Temperature: 0°C to 40°C (32°F to 104°F) Relative humidity (non-condensing): 0 to 95%

Construction Housing: Flame retardant ABS plastic, UL flame rating of 94-5VA


Weight 6oz

Color Black

Mounting Surface or Wall Mount

Patents Patent(s) Pending

Certifications FCC Certified IC Approved


Device Settings

WIH-aP


WIH-AP2

wiHUBB® Access Point 2.0WIRELESS LIgHTINg CONTROLS

Hubbell Building Automation’s wiHUBB® Access Point 2.0 is a user friendly, web-

based device for commissioning and managing hundreds of devices within the

wiHUBB wireless mesh network. The wiHUBB Access Point’s integrated web server

provides access to the wiHUBB network using any standard web browser – no

special client side PC software required. The intuitive and easy to use Graphical

User Interface (GUI) provides building owners and facility managers with the ability

to schedule and control individual wiHUBB-enabled devices or groups of devices.

PRODUCT fEATURES

• Web-based commissioning and management of the

wiHUBB system

• Integrated web server provides connection via standard

web browsers

• Easy system access from the local network or Internet

• Intuitive and easy to use Graphical User Interface (GUI)

• Ability to schedule wiHUBB-enabled devices or groups

of devices

• Provides On/Off and dimming control of wiHUBB-enabled

devices and groups of devices

• View power consumption from each device

• Robust & reliable 900Mhz wireless self-organizing and

self-healing mesh network

• FCC certified

2.44”

7.5”

8.26”

902 - 928MHzFrequencyAntenna

EthernetPorts

120VAC Power Adapter


®

WIRELESS

120VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


Device Settings


wiHUBB Network Size Supports over 100 wiHUBB devices

Power Requirements 120VAC - Plug-in power adapter included



Operating Environment Operating Temperature: 0°C to 40°C (32°F to 104°F) Relative humidity (non-condensing): 0 to 95%

Construction Housing: Metal enclosure

Dimensions Size: 8.26”L x 7.55”W x 2.44”H

Weight 3lb 6oz

Color Black


Certifications FCC Certified

IC Approved


MODEL WIH-aP2 wiHUBB Access Point 2.0

WIH-aP2



WIH-SP-2RD-1277

wiHUBB® Smart PackWIRELESS LIgHTINg CONTROLS

PRODUCT fEATURES

• Single or dual relay versions for On/Off or High/Low control

• Optional 0 – 10V interface for full range dimming control

• Plug-and-play support for wiHUBB occupancy sensors,daylight

sensors and switch stations

• Device intelligently and automatically responds to sensors

and switches in the most energy- efficient manner

• Schedules are held in the devices themselves – no need

for a master scheduling device

• Retains data during power outages

• Robust & reliable 900MHz wireless self-organizing and self-healing

mesh network

• Future-proof design – firmware updateable over the air

• FCC certified


Hubbell Building Automation’s wiHUBB® Smart Pack is a self-contained intelligent

wireless power pack. It contains either one or two independently controlled outputs.

The two output version can be used for High/Low or alternate circuit switching.

An optional 0-10VDC output is also available for full range dimming control of dimmable

ballasts and LED drivers. Each wiHUBB Smart Pack can control one or more circuits and

can be individually controlled or grouped with other wiHUBB devices.

The wiHUBB Smart Pack also features SmartPORT technology that provides plug-

and-play support for wiHUBB occupancy sensors and manual control switches.

When devices are plugged into the SmartPORTs, the Smart Pack automatically and

intelligently responds to the devices to provide the most energy-efficient operation.

The wiHUBB Smart Pack communicates via 900MHz radio frequency to other devices

within the wiHUBB wireless self-organizing and self-healing mesh network.

1.3”

5.75”

3.85”900MHZRadio Antenna

Plug and Play SmartPORTs

WIRELESS0-10V

DIMMING


®120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


900MHZRadio Antenna

OUTPUT1r 1 SPST Output

1rd 1 SPST Output, 0-10VDC Dimming Output

2r 2 SPST Outputs

2rd 2 SPST Outputs, 0-10VDC Dimming Output

INPUT vOLTAgE1277 120/2777VAC

MODELWIH-SP


Electrical Ratings Input: 120/277VAC, 20A Max, 60Hz Output*: 20A, Tungsten, 120VAC only 20A, Magnetic Ballast 16A, Electronic Ballast 1 H.P. Motor @120V, 3/4 H.P. @277V *For (2) relay models the maximum combined output of both relays: 20A

Low Voltage Ports:

Class 2 24VDC, 150mA MAX (all outputs combined)

Optional Dimming Interface 0-10V, 30mA output For use with low-voltage, two-wire dimming ballast and LED drivers.



Operating Environment Operating Temperature: 0°C to 40°C Relative humidity (non-condensing): 0 to 95%

Construction Housing: GSM UL Rated 94 HB Plastic



Weight 4 oz

Color Gray

Mounting Mounts directly to an external junction box through an extended ½” chase nipple.


Certifications Conforms with UL916 and Certified to CAN/CSA C22.2 No. 205-M1983 FCC Certified IC Approved



WIH-SP 1277


WIH-OS-OMDT2

WIH-OS-LODT

Hubbell Building Automation’s wiHUBB® Ceiling Mount and Wall Mount

Occupancy Sensors employ passive infrared, ultrasonic, and acoustic sensing

technologies to turn lighting on and off based on occupancy. These sensors

represent the state-of-the-art in sensor technology and are designed to provide

accurate turn-on while virtually eliminating false-offs.

The sensors feature Hubbell Building Automation’s patented IntelliDAPT®

technology, which makes all the sensor adjustments automatically. Throughout the

product’s lifespan, smart software analyzes the controlled area and makes digital

adjustments to sensitivity and timer settings. Occupancy sensors with IntelliDAPT

provide a maintenance-free install and forget operation. All wiHUBB Occupancy

Sensors provide plug-and-play integration with the wiHUBB Smart Pack.

PRODUCT fEATURES

• IntelliDAPT® self-adaptive technology – no manual adjustment required



• 500 to 2,000 square-foot coverage area (based on model)

• Optional Isolated Form C relay with N/O + N/C outputs

• Plug and play integration with wiHUBB Smart Pack



wiHUBB® Ceiling Mount and Wall Mount SensorsWIRELESS LIgHTINg CONTROLS


SENSING


®TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


oMdt2 Ceiling Mount, PIR and Ultrasonic, 2000 Sq. Ft. oMdt2r Ceiling Mount, PIR and Ultrasonic, 2000 Sq. Ft., Form C RelayoMdt1 Ceiling Mount, PIR and Ultrasonic, 1000 Sq. Ft. oMdt1r Ceiling Mount, PIR and Ultrasonic, 1000 Sq. Ft., Form C RelayoMdt5 Ceiling Mount, PIR and Ultrasonic, 500 Sq. Ft. oMdt5r Ceiling Mount, PIR and Ultrasonic, 500 Sq. Ft., Form C RelayoMuS2 Ceiling Mount, Ultrasonic, 2000 Sq. Ft. oMuS2r Ceiling Mount, Ultrasonic, 2000 Sq. Ft., Form C RelayoMuS1 Ceiling Mount, Ultrasonic, 1000 Sq. Ft. oMuS1r Ceiling Mount, Ultrasonic, 1000 Sq. Ft., Form C RelayoMuS5 Ceiling Mount, Ultrasonic, 500 Sq. Ft. oMuS5r Ceiling Mount, Ultrasonic, 500 Sq. Ft., Form C RelayoMIr Ceiling Mount, Passive Infrared, 450 Sq. Ft.oMIrr Ceiling Mount, Passive Infrared, 450 Sq. Ft., Form C RelayoMIrl Ceiling Mount, Passive Infrared, 1500 Sq. Ft.oMIrlr Ceiling Mount, Passive Infrared, 1500 Sq. Ft., Form C RelayoMdIa Ceiling Mount, PIR and Acoustic, 450 Sq. Ft.oMdIar Ceiling Mount, PIR and Acoustic, 450 Sq. Ft., Form C Relaylodt Wall Mount, PIR and Ultrasonic, 1600 Sq. Ft.lodtr Wall Mount, PIR and Ultrasonic, 1600 Sq. Ft., Form C RelayloIrWV Wall Mount, Passive Infrared, 2500 Sq. Ft. loIrWVr Wall Mount, Passive Infrared, 2500 Sq. Ft., Form C RelayloIrHb Wall Mount, Passive Infrared, 50’ at 30’ Height loIrHbr Wall Mount, Passive Infrared, 50’ at 30’ Height, Form C RelaylodIa Wall Mount, PIR and Acoustic, 1600 Sq. Ft.lodIar Wall Mount, PIR and Acoustic, 1600 Sq. Ft., Form C Relay

WIH-oS

ModEl SENSor tYPE


WIH-oS


IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic and passive infrared thresholds Automatic false-on, false-off corrections

LED Indicators Red: motion detected by Passive Infrared sensing technology Green: motion detected by Ultrasonic sensing technology

Timer Timeout Automatic mode: 8-30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)

Ultrasonic Output Maximum amount of radiation output allowed: 115dB @ 1 ft. from source Frequency: 32.768kHz or 40kHz (based on model)

Passive Infrared Dual element pyrometer and 12 element cylindrical rugged lens

Form C Relay Relay: NO + NC contacts, SPDT, 500 mA rated @ 24VDC, three wire, isolated relay

Coverage Ceiling mount sensor: 500 sq. ft. (Major motion) / 250 sq. ft. (Minor motion) to 2000 sq. ft. (Major motion) / 1000 sq. ft. (Minor motion) –(based on model) Wall mount sensor: 1600 sq. ft. (Major motion) / 800 sq. ft. (Minor motion)

Power Requirements Powered by wiHUBB Smart Pack SmartPORT using plenum rated CAT5 cables (ordered separately)

Operating Environment Indoor use only Operating Temperature: 0°C to +40°C Relative humidity (non-condensing): 0 to 95%

Construction Casing – rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UV-945VA) flame class rating, UV inhibitors

Color Off White

Mounting Mounting base provided Recommended MAX mounting height: 12 ft.

Patents U.S. Patents: 6151529, 5946209, 5699243, 5640143, 6415205, 6078253, D404326, 6222191, 5986357, 6759954 Patent(s) Pending




WIH-SW-OO

WIH-SW-HLO WIH-SW-ORLO

wiHUBB® Switch StationsWIRELESS LIgHTINg CONTROLS

WIH-SW-PRESET

WIH-SW-GAV WIH-SW-RL

PRODUCT fEATURES

• Attractive, architecturally-pleasing decorator style design

• Multiple switch options available

• All switches mount to standard single or multi-gang wall boxes

• Plug-and-play integration with wiHUBB Smart Pack


WIH-SW-TO

Hubbell Building Automation’s wiHUBB® Switch Stations provide manual control

of the wiHUBB System. The wiHUBB Switch Stations include an On/Off switch,

a High/Low/Off switch for multiple level lighting control, an On/Raise/Lower/

Off switch, a 4-button Preset switch for scene control, a General–A/V switch that

enables users to switch between General Lighting and Audio/Visual Lighting, a

Raise/Lower dimmer switch and a Timed On switch. All wiHUBB Switch Stations

provide plug-and-play integration with the wiHUBB Smart Pack.

On/Off Switches

1.6”

4.2”

1.4”


24VDC

LOW

VOLTAGEWIRELESS COMES TO LIgHT®

®


SWItcH tYPEoo On/Off SwitchHlo High/Low/Off Switchorlo On/Raise/Lower/Off SwitchPrESEt Preset/Scene Switch (4-button)gaV General – A/V Mode Switchrl Raise/Lower Switchto Timed On Switch

colorWH White

IV Ivory

la Light Almond

gY Gray

bk Black

ModElWIH-SW


Power Requirements Powered by wiHUBB Smart Pack SmartPORT using plenum rated CAT5 cables (ordered separately)

Operating Environment Indoor use only Operating Temperature: 0°C to 40°C Relative humidity (non-condensing): 0 to 95%

Construction Housing – Rugged, high impact, injection molded plastic


Weight 1.6 oz

Color White, Ivory, Light Almond, Gray, and Black

Mounting Switches may be mounted individually in a single gang switch box or ganged together in a multi-gang switch box Decorator-style wall plates available separately




WIH-SW


WIH-IM-1RDFF-1277

wiHUBB® In-fixture ModuleWIRELESS LIgHTINg CONTROLS

PRODUCT fEATURES

• Single or dual relay versions for On/Off or High/Low control

• Optional 0 – 10V interface for full range dimming control

• Device intelligently and automatically responds to sensors and

switches in the most energy-efficient manner

• Schedules are held in the devices themselves – no need for a

master scheduling device

• Monitors, measures, and records energy consumption and

runtime data

• Retains data during power outages

• Robust & reliable 900MHz wireless self-organizing and self-healing

mesh network

• Future-proof design – firmware updateable over the air

• Multiple antenna options available

• FCC certified


Hubbell Building Automation’s wiHUBB® In-Fixture Module (IFM) is a self-contained

intelligent wireless control module. It contains either one or two independently-

controlled outputs. The two-output version can be used for High/Low or alternate

ballast switching.

An optional 0-10V output is also available for full-range dimming control of

dimmable ballasts and LED drivers. Each wiHUBB IFM can control one or more

fixtures and can be individually controlled or grouped with other wiHUBB devices.

The wiHUBB IFM communicates via 900MHz radio frequency to other devices

within the wiHUBB wireless self-organizing and self-healing mesh network.

1.08”

5.5”

4.5”

1.27”

WIRELESS0-10V

DIMMING


®120277

VAC

347VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

5(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com

outPut1ra 1 SPST Output, Articulating Antenna1rda 1 SPST Output, 0-10VDC Dimming Output, Articulating Antenna1rf 1 SPST Output, Fixed Antenna with 24” Extension Cable1rdf 1 SPST Output, 0-10VDC Dimming Output, Fixed Antenna with 24” Extension Cable2ra 2 SPST Outputs, Articulating Antenna 2rda 2 SPST Outputs, 0-10VDC Dimming Output, Articulating Antenna2rf 2 SPST Outputs, Fixed Antenna with 24” Extension Cable2rdf 2 SPST Outputs, 0-10VDC Dimming Output, Fixed Antenna with 24” Extension Cable

INPut VoltagE1277 120/277VAC347 347VAC

ModElWIH-IM

accessory

accESSorYadaPtEr In-Fixture Module J-Box

Mounting Adapter


Electrical Ratings (-1277 version) Input: 120-277VAC, 10A Max, 60Hz Output: 10A, Tungsten, 120VAC only 10A, Magnetic Ballast 5A, Electronic Ballast (max each relay) ¼ H.P. Motor, 120 & 277VAC For (2) relay models the maximum combined output of both relays: 10A

Electrical Ratings (-347 version) Input: 347VAC, 10A Max, 60Hz Output: 10A, Ballast For (2) relay models the maximum combined output of both relays: 10A

Optional Dimming Interface 0-10V, 30mA output for use with low-voltage, two-wire dimming ballast and LED drivers.



Operating Environment Operating Temperature: -40°C to +90°C Relative humidity (non-condensing): 0 to 95%



Weight 4 oz

Color Gray

Mounting Mounts inside fixture ballast cavity or housing Optional mounting adaptor available (p/n WIH-IM-ADAPTER) for external junction box mounting

Certifications Conforms with UL916 and Certified to CAN/CSA C22.2 No. 205-M1983 FCC Certified IC Approved



WIH-IM

ModElWIH-IM

WIH-IM adaPtEr


WIH-OM-UNV

wiHUBB® ON-fIXTURE MODULEWIRELESS LIgHTINg CONTROLS

Hubbell Building Automation’s wiHUBB® On-Fixture Module (OFM) is a self-

contained intelligent wireless control module that provides On/Off lighting control

for outdoor fixtures.

Each OFM contains an integrated daylight sensor that can be used to turn lighting

ON or OFF based on the amount of natural light available. Each wiHUBB On-

Fixture Module can be individually controlled or grouped with other wiHUBB

devices. The wiHUBB OFM communicates via 900MHz radio frequency to other

devices within the wiHUBB wireless self-organizing and self-healing mesh network.

PRODUCT fEATURES

• On/Off outdoor lighting control

• Compatible with all lighting loads including LED drivers

• Integrated daylight sensor

• Schedules are held in the devices themselves –

master scheduling device not necessary

• Retains device settings during power outages

• Robust & reliable 900MHz wireless self-organizing

and self-healing mesh network

• FCC certified


2.275”

3.50”

Twist Lock Plug

902 - 928MHzFrequency Antenna

Photocell

UV Stabilized Material

WIRELESS


®

120347VAC

480VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Electrical Ratings Input: - WIH-OM-UNV:120-347VAC, 50/60Hz - WIH-OM-480: 480VAC, 50/60Hz Output: 20A, Tungsten, Magnetic and Electronic Ballast



Daylight Sensor ON Level: 1 FC to 5 FC (Default: 5FC) OFF Level: 4 FC to 15 FC (Default: 8FC) ON/OFF Delay Times: 0-120 secs (Default: 60 secs)

Operating Environment Operating Temperature: -40°C to +90°C (-40°F to +194°F)


Dimensions 3.50”DIA x 2.275”HWeight 4 oz

Color Smoked Plastic Housing

Mounting Standard twist lock photo-sensor receptacle


Certifications Conforms with UL916 and Certified to CAN/CSA C22.2 No. 61010-1-04 FCC Certified IC Approved


INPUT vOLTAgEuNV 120-347VAC, 50/60Hz480 480VAC, 50/60HZ

MODELWIH-oM

WIH-oM



WIH-BAS-M

wiHUBB® Building Automation System gateway InterfaceWIRELESS LIgHTINg CONTROLS

Hubbell Building Automation’s wiHUBB® Building Automation System (BAS)

Gateway Interface is an external, high performance, low cost, multi-protocol

gateway for providing control and access from building automation systems to

HBA’s wiHUBB Wireless Lighting Control System. The device provides protocol

translation between wiHUBB and BAS devices using BACnet®, Metasys® N2 by

JCI, and Modbus™. The wiHUBB BAS Gateway is based on the industry leading

FieldServer Technologies™ ProtoCessor ProtoNode technology and is pre-

configured with the wiHUBB system protocol interface.

PRODUCT fEATURES

• Web browser based programming

• Intuitive and easy to use Graphical User Interface (GUI)

• Device is field selectable for specific BAS protocol


• Integrates wiHUBB lighting control systems and Building Automation Systems (BAS)

• Supports BACnet®, Metasys® N2 by JCI, Modbus™ and LonWorks® protocols

• Automatically generates all required control points and documentation for

integration with the selected protocol


4.52”

3.25”

1.6”

EthernetPort


®TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


MODEL WIH-baS

WIH-baS



Supported wiHUBB® Access Point Access Point 2.0 required (Ordered Separately)

Supported Serial (RS-485) Protocols BACnet MS/TP Modbus RTUSupported Ethernet Protocols BACnet IP Modbus TCP/IP

JCI Metasys® N2OPEN

Supported Electrical Connections (1) 6 pin Phoenix Connector (1) RS-485 +/- Ground port Power +/- Frame Ground port (1) Ethernet -10/100 Ethernet port

(1) FTT-10 LonWorks® port (LonWorks® Version)

Power Requirements 9-30 VDC or 12-24VAC

Current draw @ 12V = 240 mA

Operating environment Indoor use only -40°C to 75°C (-40°F to 167°F) Relative humidity (non-condensing): 5% to 90%


Approvals BACnet Testing Labs (BTL) B-ASC LonMark 3.4 Certified – WIH-BAS-L Version TUV approved to UL 916 standard and CSA C22-2 RoHS Compliant DNP3 Conformance Tested OPC Self Certified to Compliance CE & FCC Approved


MODEL M wiHUBB Building Automation

System Gateway Interface for Multi-Protocols - BACNET, Modbus, N2

l wiHUBB Building Automation System Gateway Interface for LonWorks®

24 vDC Power

Ethernet Port

LXPWRSPLY Power SupplyWIH-BAS

Mount all components inside HBA p/n LXENDM DIN rail enclosure. (LXENDM is ordered separately)

BASIntegration

Metasys® is a registered trademark of Johnson Controls, Inc. LonWorks® is a registered trademark of Echelon Corp.

BACnet® is a registered trademark of ASHRAE


WIH-AT-FA

wiHUBB® Antennas and CablesWIRELESS LIgHTINg CONTROLS

PRODUCT fEATURES

• Multiple antenna options available

• Excellent performance

• Omni-directional pattern

• Fully weatherized

• Rugged and damage-resistant


WIH-AT-FA

WIH-AT-AA

WIH-AT-FA-HW

Hubbell Building Automation’s wiHUBB® Antennas are designed to be used with

the wiHUBB In-Fixture Module and wiHUBB Smart Pack. The wiHUBB Articulating

Antenna and the wiHUBB Fixed Antenna-HW are ½-wave center-fed DIPole

antennas. The Articulating Antenna’s base allows the antenna to tilt 90 degrees

and rotate 360 degrees.

The Articulating Antenna and Fixed Antenna-HW’s internal counterpoise

eliminates external ground plane dependence and maximizes performance. The

wiHUBB Fixed Antenna is a ¼-wave center-fed monopole antenna that utilizes a

helical element to greatly reduce the physical length of the antenna housing.


®


WIH-at

ModElWIH-at

antenna cables

tYPEcab24IN

cab36IN

cab48IN

Antenna Cable, 24” cable (Includes mounting hardware)



ModElWIH-at

antennas


Antenna Type Dipole – No ground plane required: WIH-AT-AA, WIH-AT-FA-HW Monopole – Requires an external proximity ground plane for proper operation: WIH-AT-FA. NOTE: 4”x4” ground plane centered around the antenna base recommended.

Center Frequency 916MHz

Wavelength ½-wave: WIH-AT-AA, WIH-AT-FA-HW ¼-wave: WIH-AT-FA

Voltage Standard Wave Ration (VSWR) <2.0 typical at center: WIH-AT-AA <1.9 typical at center: WIH-AT-FA-HW, WIH-AT-FA

Impedance 50 ohms

Connector RP-SMA

Dimensions WIH-AT-AA: 5.59”H x 0.32”W with 90° tilt and 360° rotation WIH-AT-FA: 2.00”H x 0.31”W WIH-AT-FA-HW: 4.72”H x 0.32”W

Color Black


aa

fa

fa-36

fa-48

fa-HW

Articulating Antenna, Dipole – No Ground Plane Required, 5.59” H with 90° BendFixed Antenna, Monopole – Requires Ground Plane, 2.00” H, with 24” cable & mounting hardwareFixed Antenna, Monopole – Requires Ground Plane, 2.00” H, with 36” cable & mounting hardwareFixed Antenna, Monopole – Requires Ground Plane, 2.00” H, with 48” cable & mounting hardwareFixed Antenna, Dipole – No Ground Plane Required, 4.72” H


WIH-at



Electrical 4 Terminal Connections

- Red: +24V

- Blue: Occupancy Sensor Input

- Yellow: Photocell/Daylight Sensor Input

- Black: Common

Class 2 device

Max Cable Length Supported: 300-ft from device to control module

Plenum Rated Complies with requirements for use in a plenum area

Construction Material: SABIC NORYL HS2000X


Weight 0.8 oz

Color Gray

Mounting Adapter may be mounted using a zip-tie (not included) or with a #8 or #10 mounting screw (not included)


RJ45 Adapter and CAT5 System CablesWIRELESS LIgHTINg CONTROLS

Hubbell Building Automation’s RJ45 Adapter and CAT5 system cables are designed to be

used with HBA low voltage occupancy and daylight sensors. The adapter replaces the Quick-

To-Install™ (QTI) connectors previously used by the wiHUBB® and Zone5™ occupancy and

daylight sensors and enables devices to connect to HBA control modules (e.g. wiHUBB

Smart Pack, Zone5 Control Module, etc) using standard CAT5 cable.

PRODUCT fEATURES

• Supports wiHUBB and Zone5 occupancy and daylight sensors

• Plenum rated


RJ45Adapter

24VDC

LOW

VOLTAGEWIRELESS COMES TO LIgHT®

®


cat5 System cables

SPEcIal NotES:1. When cutting CAT5 cable to specific lengths, the cable pin out is as follows:

WHITE with ORANGE STRIPEORANGEWHITE with GREEN STRIPEBLUEWHITE with BLUE STRIPEGREENWHITE with BROWN STRIPEBROWN

rJ45adaPtEr

rJ45adaPtEr-10

rJ45adaPtEr-50

RJ45 Adapter

RJ45 Adapter - 10 Pack

RJ45 Adapter - 50 Pack

cat5-3IN-bl

cat5-10f-bl

cat5-50f-bl

cat5-100f-bl

cat5-10f-WH

cat5-50f-WH

cat5-100f-WH

cat5-10f-gN

cat5-50f-gN

cat5-100f-gN

cat5-3IN-Yl

cat5-50f-Yl

cat5-100f-Yl

CAT5 Jumper Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 3in, Blue










CAT5 Jumper Cable for Zone5 Master/Row Control Switches, Plenum Rated, 3in, Yellow



12345678

ModEl/dEScrIPtIoN

ModEl

PIN No. WIrE color


rJ45 adapter


WIH-DS

Hubbell Building Automation’s wiHUBB® Daylight Sensors provide the necessary

daylight-level information to the wiHUBB network. Using a photodiode element,

the daylight sensor continuously measures daylight levels and sends the

information to the network devices which then perform daylight switching or

dimming functionality based on the amount of natural light in the area.


Electrical Four jumper-selectable foot candle ranges: 0.3-30fc; 3-300fc; 30-3,000fc; 60-6,000fc

Powered by wiHUBB Smart Pack SmartPORT using plenum rated CAT5 cables (ordered separately)

Operating Environment WIH-DS: Indoor use only. Operating Temperature: 0°C to +40°C

WIH-DS-O: Outdoor Use - IP54. Operating Temperature: -40°C to +50°C


Dimensions 2”D x 1.2”H



PRODUCT fEATURES

• Indoor and Outdoor models available



• Foot-candle range: 3-6,000fc


• Color coded, plug-and-play integration with wiHUBB Smart Pack




ModEl / dEScrIPtIoNWIH-dS

WIH-dS-owiHUBB Daylight SensorwiHUBB Daylight Sensor for Outdoors

DAYLIGHTHARVESTING

WIRELESS LIgHTINg CONTROLS

wiHUBB® Daylight Sensors


®TESTED & APPROVED


IP54

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

wiSTAR™ is a wireless, self-powered lighting control system designed for stand-alone,

indoor applications such as offices, conference rooms, break rooms, classrooms and much more. From retrofitting

older structures to designing new buildings, wiSTAR is a simple way to ensure flexibility, energy savings, and cost

reductions to almost any space.

Seamless Area Lighting

NO BATTERIES

Utilizing the EnOcean Technology Platform, wiSTAR devices harvest energy from their surroundings – tiny changes

in movement or light are all that is needed. The wall switches use the linear motion of the button push to create the

power needed to send a signal to operate the lights. Sensors have tiny solar cells that convert light into the power

they need to do the same thing. These solar cells work off of any light source and the converted energy is stored for

operation during times with no light.

NO WIRES

wiSTAR devices are self-powered and require no wires to operate. These devices can be freely positioned making

for versatile layouts. Compared to a wired solution, buildings can be planned, constructed and operated with greater

flexibility and at a lower cost.

NO WORRIES

With wireless technology, wiSTAR installs easily into existing buildings without the need to completely rewire the

space. This makes wiSTAR ideal for adding lighting controls to areas that have traditionally been difficult to retrofit,

including historical buildings.

TM



WIS-ISM

TM

PRODUCT fEATURES

• Switches lighting or other electrical loads On/Off

• Installs inside or mounts to electrical box using threaded connector

• Easily links with wireless sensors and switches


A simple solution for wireless control of lighting and appliances. Hubbell Building

Automation’s wiSTAR™ In-line Switch Module uses radio frequency technology

to communicate with other wiSTAR products and provides an amazingly simple

solution for control of lighting and other electrical loads.

The module’s compact size enables flexible installation inside of or next to

electrical boxes and fixtures so it can be easily wired out of sight using standard

wiring practices. Simply link the module to a wiSTAR occupancy sensor, switch or

light sensor and experience levels of efficiency and convenience that can only be

achieved through wireless controls.

2.78”

1.65”

Compact Casing

1.1”

WIRELESS

Device Configuration and Manual Control Buttons with LEDs


120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

wiSTARTM In-line Switch Module



Power Supply 120/277VAC, 50/60Hz

Maximum Load General Purpose – 16A @ 120/277VAC Resistive – 16A @ 120/277VAC Tungsten – 960W @ 120VAC Ballast - 600W @ 120VAC

Motor Load Rating - ½ HP @ 120VAC

Power Consumption 1.1W @ full load, 500mW quiescent

Inputs/Outputs Flying-lead style power input wires 1 normally open relay 1 switched output wire Radio Frequency (RF) transceiver 2 Buttons with LEDs for device configuration and manual control

RF Communications EnOcean 902 MHz

Transmission Range 80ft. (25m)


Weight 3.2 oz.

Mounting Install inside standard electrical box Connect to electrical box and fixutes using 1/2” threaded nipple

Environment Indoor use only 32° to 131° F (0° to 55° C) 20% to 95% relative humidity (non-condensing)

Agency Compliance Conforms to UL Std. 244A and 1472 Certified to CAN/CSA Std. C22.2 NO 184 FCC: SZV-STM300U IC: 5713A-STM300U


Interoperable Products / EEPs Product Name (EEP #)(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0° to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)


MODEL

WIS-ISM-WH wiSTAR In-line Switch Module, 902MHz, White

WIS-ISM-WH


WIS-PSM

PRODUCT fEATURES

• Provides switching of plug-in electrical loads

• Communicates with other devices to enable energy savings

• Plugs into any standard outlet, no wiring required

• Easily links with wireless sensors and switches


A simple solution for wireless control through any standard outlet. Controlling

lamps and electronics in any room is simple when you use Hubbell Building

Automation’s wiSTAR™ Plug-In Switch Module.

The module uses radio frequency technology to communicate wirelessly with

other wiSTAR devices and provides convenient control of lighting and electronic

appliances. Simply plug the module into any standard outlet and then plug the

lamp or other electronic device into the receptacle on the opposite end. Link the

module to a wiSTAR switch or occupancy sensor for convenient wireless control.

4.09”

1.85”

1.26”

WIRELESS

Device Configuration and Manual Control Buttons with LEDs

TM


wiSTARTM Plug-in Switch Module

120VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Power Supply 120VAC, 50/60Hz

Power Consumption 1.1W @ full load, 500mW quiescent

Inputs/Outputs Standard male plug for power input Standard female plug for controlled output 1 normally open relay Input for accessory tabletop rocker pad Radio Frequency (RF) transceiver 2 Buttons with LEDs for device configuration and manual control

Maximum Load General Purpose – 15A @ 120VAC Resistive – 15A @ 120VAC Tungsten – 960W @ 120VAC Ballast - 600W @ 120VAC Motor Load Rating - ½ HP @ 120VAC




Weight 12.3oz. (348g)

Cord Lengths Plug cord: 3ft. (91.4cm)

Outlet cord: 1 ft. (30.5cm)

Mounting Free standing, or mounts to wall using included mounting plate


Agency Compliance Conforms to UL Std. 244A and 1472 Certified to CAN/CSA Std. C22.2 No. 184 FCC: SZV-STM300U IC: 5713A-STM300U


Interoperable Products / EEPs Product Name (EEP #)(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0° to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)


MODEL

WIS-PSM-WH wiSTAR Plug-In Switch Module, 902MHz, White

WIS-PSM-WH


WIS-DSM

Hubbell Building Automation’s wiSTAR™ Wireless Light Sensor has built-in solar

cells that draw on available ambient light to power itself and can operate for up

to 7 days in total darkness. Batteries are not required for continuous operation.

The Light Sensor is designed to operate in closed loop applications for light levels

from 0 to 94.8 footcandles (0 to 1020 LUX).

This is a revolutionary product for daylight harvesting applications to meet energy

saving initiatives. Optimally place the sensor in the desired lighted space, pair

it with a receiver for load control and your installation is complete. The self-

powered wireless light sensor design also overcomes the placement and coverage

challenges of traditional light sensors. They may be mounted wherever needed

without moving or installing new wiring or conduit.

PRODUCT fEATURES

• Daylight Harvesting with both switched and dimmed capabilities

• Self-Powered & Self-Charging

• No Batteries or External Power Required

• Quick Charge Time to Operation

• Up to 7 days of Stored Power


WIRELESSDAYLIGHT

HARVESTINGNO BATTERIES OR POWER REQUIRED

Solar Cells

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

TM


wiSTARTM Light Sensor



Frequency 902 MHz

Photocell 0 to 94.8FC (0 to 1020 LUX)

Transmission Interval Upon > 20FC (200LUX) changes

Minimum Light Required 4FC (40 LUX)

Solar Cell Operating Range 4 to 100FC (40 to 1000 LUX)

Minimum Charge Time to Begin Operation 1 minute @ 20FC (200 LUX)

Full Charge Time ~8 hours @ 100FC (1000 LUX)

Maintain Charge Time 3 hours per 24 hours @ 20FC (200 LUX)

Operation Life at Full Charge 7 Days

Optional Battery Life 10 Years

Operating Temperature Range 32°F to 104°F (0°C to 40°C)

Storage Temperature Range -4°F to 158°F (-20°C to 70°C)

Relative Humidity 0% to 95%, non-condensing

Usage Indoor use only

Mounting Height 8-12 feet



MODEL

WIS-dSM-WH wiSTAR Daylight Sensor Module, 902MHz, White

WIS-dSM-WH


WIS-OSC

Saving energy without sacrificing comfort can be effortless with occupancy based

controls. Hubbell Building Automation’s wiSTAR™ Ceiling Mounted Occupancy

Sensor enables a new level of energy saving control for rooms, hallways and

other common areas. The occupancy sensor uses radio frequency technology to

communicate wirelessly with other wiSTAR devices to turn off lights and electrical

loads when a space has been unoccupied for a set period of time.

Because the sensor is wireless there is no need to run additional wiring and

installation can be completed in a matter of minutes. The sensor is self-powered

by harvesting light energy, eliminating the need for periodic battery changes. The

clean, contemporary styling makes the sensor an attractive addition to any décor.

WIRELESSOCCUPANCY

SENSINGNO BATTERIES OR POWER REQUIRED

PRODUCT fEATURES

• Sends messages to other devices when motion is detected

• Harvests light energy to power the sensor

• Mounts easily on any ceiling or material

• Works with other sensors for enhanced occupancy tracking

• Built-in tests to confirm operation

• Alternate power supply options for extreme low light conditions


6.5”

1.47”

PIRMotion Sensor

Integrated Solar Cells

2.36”

TM


wiSTARTM Ceiling Mounted Occupancy Sensor

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


0-1’ 3.1’ 4.6’ 7.5’ 9.3’ 16.8’14.2’13.’10.9’

10’

0


MODEL

WIS-oSc-WH wiSTAR Occupancy Sensor - Ceiling Mount, 902MHz, White

WIS-oSc-WH


Power Supply Indoor light energy harvesting (Optional supplemental battery or 2-wire connector for external power or remote solar cell)



Motion Detection Range 40ft. (25m) diameter

Minimum Operating Light 50 lux (for auto-off only)

Startup Charge Times (from empty) Linking = 4 min @ 100 lux 1.5 min @200 lux Motion Transmission = 6 min @ 100 lux 3.5 min @ 200 lux Note: Bright light or battery can be temporarily used to shorten initial startup charge times

Charge Time to Full 9 hrs @ 200 lux

Sustaining Charge Time 3 hours per 24 hours @ 200 lux

Motion Transmission Interval 60 - 300 seconds (based on real-time charge rate) 60 sec @ 200 lux - 300 sec @ 50 lux

Heartbeat Transmission Interval 120 - 600 seconds (based on real-time charge rate) 120 sec @ 200 lux - 600 sec @ 50 lux

Operating Life in Darkness 48 hours (after full charge)

EnOcean Equipment Profile (EEP) A05-07-02

Dimensions 6.5”H x 2.36”W x 1.47” D

Mounting Height 7 - 10 feet (recommended)

Agency Compliance FCC: SZV-EOSC05 IC: 5713-EOSC05


Interoperable Products / EEPs Product Name (EEP #)

(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 - 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)

Top view of sensor coverage based on 10ft mounting height Side view of sensor coverage based on 10ft mounting height



wiSTARTM Wall Mounted Occupancy Sensor

WIS-OSW

Saving energy without sacrificing comfort can be effortless with occupancy based

controls. Hubbell Building Automation’s wiSTAR™ Wall-Mounted Occupancy

Sensors are wireless and self-powered making them one of the most cost-effective

ways to control energy-use in unoccupied rooms. They can be installed in minutes

because there are no additional wires to run and they require no batteries so on-

going maintenance costs are eliminated.

The sensor harvests solar energy from indoor light and uses radio frequency

technology to communicate wirelessly with other wiSTAR devices, turning off lights

and electrical loads when it detects that a space has been unoccupied for a set

period of time. The wall-mounted occupancy sensors feature clean contemporary

styling, making them an attractive addition that’s sure to compliment any décor.

PRODUCT fEATURES

• Sends messages to other devices when motion is detected

• Harvests light energy to power the sensor

• Mounts flush on wall or in a corner

• Works with other sensors for enhanced occupancy tracking

• Interchangeable lenses for tailored sensor coverage

• Built-in tests to confirm operation

• Alternate power supply options for extreme low light conditions


WIRELESSOCCUPANCY

SENSINGNO BATTERIES OR POWER REQUIRED

PIRMotion Sensor

Integrated Solar Cells

5.83”

2.52”1.8”

TMTITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


Long Range Coverage Top View

16ft

8ft

0

77°

21.5° 14°6 .5°

29°

16ft

8ft

center line

6.8ft(2.1m)

3ft(1m)

7ft(2.2m)

10ft(3m)

60ft(18.3m)

100ft(30.5m)

35ft(10.7m)

Side View

Wide Angle Coverage Top View

16ft (5m)

33ft (10m)

33ft (10m)

16ft (5m)

0

50ft(15.2m)

6ft(1.2m)

Side View

15ft(4.6m)

25ft(7.6m)

6.8ft(2.1m)


Power Supply Indoor light energy harvesting (Optional supplemental battery or 2-wire connector for external power or remote solar cell)



Motion Detection Range 50ft. wide angle lens / 100ft. long range lens

Minimum Operating Light 50 lux (for auto-off only)

Startup Charge Times (from empty) Linking = 4 min @ 100 lux

1.5 min @200 lux Motion Transmission = 6 min @ 100 lux 3.5 min @ 200 lux Light/Walk Test Modes + 5.5 hrs @ 200 lux

Note: Bright light or battery can be temporarily used to shorten initial startup charge times

Charge Time to Full 9 hrs @ 200 lux

Sustaining Charge Time 3 hours per 24 hours @ 200 lux

Motion Transmission Interval 60 - 300 seconds (based on real-time charge rate) 60 sec @ 200 lux - 300 sec @ 50 lux

Heartbeat Transmission Interval 120 - 600 seconds (based on real-time charge rate) 120 sec @ 200 lux - 600 sec @ 50 lux

Operating Life in Darkness 48 hours (after full charge)

EnOcean Equipment Profile (EEP) A05-07-02


Mounting Height 6 - 8 feet (recommended)

Agency Compliance FCC: SZV-EOSC05 IC: 5713-EOSC05


Inter-operable Products / EEPs Product Name (EEP #)

(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01)

Central Gateway (A5-38-08)


MODEL

WIS-oSW-WH wiSTAR Occupancy Sensor - Wall Mount, 902MHz, White

WIS-oSW-WH


WIS-KCS

Take the first step toward significant energy savings. Hubbell Building Automation’s

wiSTAR™ Key Card Switch is one of the simplest, most economical ways to save

energy through occupancy based control of lighting, HVAC and miscellaneous

electric loads.

The switch is self-powered and the simple act of inserting or removing the card

generates enough kinetic energy to send a wireless signal to other wiSTAR devices

within the room. To operate the switch, guests simply insert their key card in the

slot when they enter the room and then remove it when they leave. The key card

switch is wireless and can be installed in minutes without having to drill into the

wall or run additional wiring. The switch features a clean contemporary styling,

making it an attractive addition that’s sure to compliment any décor.

PRODUCT fEATURES

• Determines occupancy based on guest room key being inserted or removed

• Harvests kinetic energy from the card action - no batteries

• Installs easily in new or existing rooms - no wiring

• Transmits room occupancy status wirelessly


WIRELESSNO BATTERIES OR POWER REQUIRED

4.72”

3.8”0.43”

Key Card Slot

TM


wiSTARTM Key Card Switch



Power Supply Mechanical energy harvesting (power is generated by the motion of key card moving in or out)

Inputs/Outputs Slot for standard hotel key card (2.125” W x 3.375” H x 0.034” D) Radio Frequency (RF) transmitter



RF Transmission On key card insertion or removal

EEP (EnOcean Equipment Profile) F6-04-01

Installation Surface mounted on wall (using included mounting screws)

Dimensions 4.72”H x 3.8”W x .43”D

Weight 3.5 oz. (99 g)


Agency Compliance FCC: SZV-PTM33XU IC: 5713A-PTM33XU


Interoperable Products / EEPs Product Name (EEP #)

(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01)

Central Gateway (A5-38-08)


MODEL

WIS-kcS-WH wiSTAR Key Card Switch, 902MHz, White

WIS-kcS-WH



wiSTARTM Wall Switches

WIS-SRPWIS-DRP

PRODUCT fEATURES

• User interface for controlling lighting loads

• Harvests energy from linear motion - no batteries

• Transmits unique RF message each time pressed or released


4.9”

Mechanical EnergyHarvesting

1 or 2 Button Rocker Switches

EnOcean 902MHz Frequency

Self-powered wireless controls are simple to install. Hubbell Building Automation’s

wiSTAR™ Single and Double Rocker Switches use EnOcean energy harvesting

technology to communicate wirelessly with other wireless devices and provide

convenient control of lighting, temperature and miscellaneous electric loads.

The rocker switches are self-powered and never require batteries. The action of

pressing the rocker generates enough energy to send a wireless signal to other

wiSTAR devices. Use them in conjunction with sensors and controls to maximize

efficiency and provide a level of comfort and convenience you cannot achieve with

traditional switches. The rocker switches feature a clean contemporary styling,

making them an attractive addition that’s sure to compliment any décor.

WIRELESS

4.52”

3.21”

0.72”0.74”

WIS-SRPWIS-DRP

NO BATTERIES OR POWER REQUIRED

TM



Power Supply Mechanical Energy Harvesting (power is generated by the motion of pressing the switch)

Inputs/Outputs 1 or 2 button rocker switch options Radio Frequency (RF) transmitter



RF Transmission On press and release of rocker button

EEP (EnOcean Equipment Profile) F6-02-02

Dimensions Single: 4.95”H x 3.21”W x 0.74”D Double: 4.95”H x 4.52”W x 0.72”D

Weight Single: 3.98oz. Double: 5.3oz.

Mounting Surface mounted on wall (using included mounting screws) Can also be flush mounted by optional use of electrical wall box or low-voltage ring


Agency Compliance FCC: SZV-PTM210U IC: 5713A-PTM210U


Inter-operable Products / EEPs Product Name (EEP #)

(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 - 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)


MODEL

WIS-SrP-WH wiSTAR Single Rocker Pad, 902MHz, White

WIS-drP-WH wiSTAR Double Rocker Pad, 902MHz, White

wiSCAPE GATEWAYS

wiSCAPE Gateways are used to combine up to 1000 wiSCAPE

Fixture Modules into a single wireless network. Although each

Fixture Module is functionally autonomous, the Gateway also

acts as an access point through which the modules can be

managed, monitored, and metered through wiSCAPE View™

software.

wiSCAPETM uses a combination of fixture modules and gateways to create a wireless

street lighting controls solution. wiSCAPE components are adaptable to ALL fixture

types and ALL voltages in new and retrofit street lighting environments. These

components create a secure peer-to-peer, self-organizing and self-healing mesh network infrastructure that allows for distances

of 300ft or 1,000ft between devices*. wiSCAPE allows users to manage, monitor, and meter individual fixtures or groups of

fixtures over-the-air with the click of a mouse.

*Dependant on choice of module.

THREE SERVER OPTIONSThere are three ways to host wiSCAPE on a server:

1. Local PC tied directly to the Gateway(s).

2. Local PC connected to remote Gateway(s) via

the Internet.

3. Cloud based server connected to remote

Gateway(s) via the Internet.

Smart Street Lighting

wiSCAPE FIXTURE MODULES • Dry contact inputs for low voltage devices.

• Dry contact output for driving external contactors.

• 0-10V output control for Pre-set levels,

Ramp speed (Up-Down), Smooth transition, Minimum

and Maximum Dimming levels, Minimum On-time before

dimming, and Demand/ Response load shedding settings.

• Unlimited number of schedules based on Sunrise/Sunset,

Time of Day, Day of Week, Predefined periods and Holidays.

• Real latitude and longitude location information.

• Unique serial number bar code.

• Works with all lighting fixtures types including:

• LED,

• Induction,

• MH-HPS-LPS

• Incandescent

• Halogen, and Plasma.

PAgE 19 0

wiSCAPE REDUCES THE OvERALL AMOUNT Of ENERgY USED BY STREET LIgHTSOne of the best ways to save energy from street lighting is to dim or switch fixtures off when they are not needed. wiSCAPE offers a variety of features to facilitate this:

Photocells, Light Sensors, Standard Time Clock, Astronomical Time Clock Lights can be dimmed* or switched based on daylight levels, time schedules and/or sunrise and sunset. For example, streetlights could be turned on 15 minutes before sunset, dimmed to 50% at 11 p.m., set to full at 5 a.m., and turn off 15 minutes after sunrise.

wiSCAPE performs every function municipal engineers and control electricians are looking for:

*Dimming solutions are only available when used with a 0-10V dimmable fixture.

WISCAPE IS AffORDABLE TO INSTALLThe cost of the fix is always a concern as municipalities and utilities have limited budgets to work with.

Wireless and ModularWhether cities choose to retrofit existing fixtures or go with something new, wiSCAPE modules are compatible with all types of lighting fixtures and aren’t limited to any specific fixture manufacturer. The wireless technology allows for a cost effective installation, eliminating the need for trenching and wiring – practices that can make controls an expensive solution. Due to the modular nature of wiSCAPE, additional fixtures and streets can be added to the system at any time or as funds become available.

WISCAPE LIgHTS STREETS BASED ON ACTIvITY LEvEL Some street locations have such random use at night that trying to set light levels based on a schedule is nearly impossible.

Motion Sensors Motion sensors would allow each individual streetlight to dim* or switch on or off based upon whether motion is detected from either a vehicle or a pedestrian.

WISCAPE ENABLES MUNICIPALITIES TO PAY fOR ACTUAL ENERgY CONSUMED Because streetlights are not always metered, cities are often charged a tariff per streetlight currently installed. While this method is rarely accurate due to fixtures requiring maintenance at any given time, it’s difficult to prove exactly how much energy was really consumed.

Monitoring and Metering wiSCAPE allows the city to monitor and meter each fixture’s energy use and create an energy usage report for an individual fixture, a zone or the entire city.

WISCAPE ALLOWS fOR STREAMLINED AND ECONOMICAL STREET LIgHTINg NETWORKS Keeping city fixtures in working order is costly. Oftentimes, maintenance departments are unaware of an outage until they get a call or incur the cost of sending maintenance crews out each night to visually identify lamp failures.

Alarms and NotificationswiSCAPE can be set to trigger alarm notifications for streetlight problems such as burned lamps, over/under voltage, and cycling. Not only does wiSCAPE report the exact problem fixture and fixture location (GPS), the system also gives the information needed for maintenance crews to prioritize repairs and schedule the most efficient repair routes.

WISCAPE ASSISTS IN MINIMIZINg LIgHT POLLUTIONLight pollution is an issue that’s gaining greater attention across the country as more and more cities are passing Dark Sky legislation.

Dimming, Scheduling, and Motion Control wiSCAPE allows for control down to the granularity of a single fixture and can utilize a combined strategy of dimming*, scheduling, and motion control to dim or turn lights off when they are not needed.

wiSCAPETM is a Wireless Street Lighting Controls Solution that enables utilities and

municipalities to manage, monitor and meter each individual streetlight throughout the city.



PRODUCT fEATURES

• Scales to any network size

• Solid-state disks withstand temperature, shock and vibrations

• Surge protected

• Module/Gateway ratio:1000 modules per Gateway

• Fail-safe operation- defaults to photocell control

• Gateways are in NEMA 4X (IP66) cabinets

• Data storage supports up to six months of rolling data storage

• 128-bit AES encryption14”

6”

wiSCAPE™ gateway WIRELESS STREET LIgHTINg CONTROLS

12”

WIRELESS

WIR-GATEWAY

Hubbell Building Automation's wiSCAPE™ Gateway is used to combine up to 1000 wiSCAPE

Fixture Modules into a single wireless network. Although each Fixture Module is functionally

autonomous, the Gateway acts as an access point through which the modules can be

managed, monitored and metered through wiSCAPE View™ software.

Using the robust 2.4GHz ISM (Industrial, Scientific and Medical) radio band, the wiSCAPE

Gateway's wireless control technology adapts easily to complex automation situations for

quick, simple and economical commissioning and operation.

120VAC

RATED


IP66


MODELWIr-gatEWaY

MODEMblank None

cM Cellular Modem


Voltage 120-240VAC; 50/60Hz

Power consumption 18 watts

Fused supply 5 amps

Surge protection 190 Joules (10,000 surge current rating measured using industry standard 8/20 µSec wave)

50/60 HZ, Consumption: max 26 VA

Ambient temperature range -400F to 1850F (-400C to 850C)

Relative Humidity Up to 99% non-condensing (fully waterproof enclosure NEMA 4x)

Dimensions 12”L x 14”W x 6”H

Construction Compression molded fiberglass reinforced polyester construction with flush, solid/opaque cover IP66 Rated

Certifications FCC/IC Certified, RoHS Compliant

Warranty Five-year limited warranty


WIr-gatEWaY

STEPDOWN TRANSfORMERWIr-StPdNXfMr-277 wiSCAPE Gateway 277V to 120V Stepdown

WIr-StPdNXfMr-347 wiSCAPE Gateway 347V to 120V Stepdown

accessory


Hubbell Building Automation's wiSCAPE™ Fixture Module is a bidirectional wireless RF

device that allows an individual fixture to be managed, monitored and metered. The wiSCAPE

Module can switch loads of up to 3 Amps and is available for the following voltages: 120,

208, 277 and 347VAC. Built-in 0-10V outputs also allow fixtures to be dimmed. The Fixture

Module works with all fixture types including: LED, Induction, MH-HPS-LPS, Incandescent,

Halogen and Plasma. Digital and analog inputs and outputs make sending and receiving

signals from additional control devices simple and easy.

wiSCAPE Fixture Modules communicates wirelessly over a robust 2.4GHz ISM (Industrial,

Scientific and Medical) certified radio signal.

The wiSCAPE Fixture Module drastically simplifies control and automation of projects,

especially in retrofit environments and challenges the legacy world of wired-systems.

wiSCAPE wireless control technology adapts easily to complex automation situations for

quick, simple and economical commissioning.

PRODUCT fEATURES

• Inputs for low-voltage switch, motion and photo sensor

• Outputs 0-10V for dimming ballasts (Sink+Source)

• Dry contact output for driving external contactors

• Bidirectional wireless RF Mesh communications

• Individual addresses providing unique serial numbers

• Can work as a fully autonomous system, or remotely managed from a central

system. No central panel required

• Multi-level grouping and multiple scenarios

• Adjustable minimum and maximum dimming levels

• Programmable state after blackout, with peak shaving options

• Blink warning and override before scheduled lights off

• Both locally and remotely controllable with status and metering reporting

• Smart daylight harvesting and motion sensing functions, with occupied and

unoccupied levels including a lamp saver function

• Demand response (load shedding) and emergency mode ready

.86”

2.65”

wiSCAPE™ fixture ModuleWIRELESS STREET LIgHTINg CONTROLS

WIRELESS

4.75”

WIR-RM

0-10VDIMMING

120, 208 277, 347

VAC

1.52”


MODELWIr-rMS wiSCAPE Wireless

Relay - Standard Range

WIr-rMl wiSCAPE Wireless Relay - Long Range

vOLTAgE24 24VAC*

120 120VAC208 208/240VAC277 277VAC347 347VAC


Voltage 120, 208-240, 277, 347; 50/60Hz Less than 2 watts standby consumption

Maximum Load Amperage 3 amps

Phase-cut Dimming Continuous retroactive trailing-edge

Output Status Monitoring Standard feature

Power Metering Amperage - Voltage - Power (2% accuracy), Power Factor, Cumulative Energy - Burn-time counters

Options Hi-Lo: Control for HID (Core & Coil) Dual-capacitors

0-10V Dimming For all types of 0-10V drivers & ballasts requiring either to be sunk (up to 200mA) or sourced (20mA standalone or higher w/ext. source)

Standard Inputs 3 Digital: ex: Motion sensor and switch top/bottom buttons (max : 48V) + 1 Analog 0-10V

Additional Outputs 2 Digital (Open-collector up to 48V—max: 20 mA total)

Standard Radio Up to 300 ft between modules

Long Range Radio Up to 1000 ft between modules

Ambient Temperature Range -400F to 1850F (-400C to +850C)

Relative Humidity 0% to 100% non-condensing (fully waterproof packaging option)

Certifications ETL 3192455, UL508 & CSA C22.2 No.14 U.S. FCC Part 15.247 : OUR-XBEE / OUR-XBEE UL94V-0 Flame retardant ABS or Epoxy molding



INPUT/OUTPUTblank None

Io Input/Output

ENCLOSUREblank NoneN4 NEMA 4

* Requires Power Pack/ Includes IO Option


Hubbell Building Automation's wiSCAPE™ Fixture Module is a bidirectional wireless

RF device that allows an individual fixture to be managed, monitored and metered. The

wiSCAPE Module can switch loads of up to 6 Amps and is available for 480VAC. Built-in

0-10V outputs also allow fixtures to be dimmed. The Fixture Module works with all fixture

types including: LED, Induction, MH-HPS-LPS, Incandescent, Halogen and Plasma. Digital

and analog inputs and outputs make sending and receiving signals from additional control

devices simple and easy.

wiSCAPE Fixture Modules communicate wirelessly over a robust 2.4GHz ISM (Industrial,

Scientific and Medical) certified meshed radio signal.

The wiSCAPE Fixture Module drastically simplifies control and automation of projects,

especially in retrofit environments and challenges the legacy world of wired-systems.

wiSCAPE wireless control technology adapts easily to complex automation situations for

quick, simple and economical commissioning.

PRODUCT fEATURES

• Inputs for low-voltage switches, motion and photo sensors

• Outputs 0-10V for dimming ballasts (Sink+Source)

• Dry contact output for driving external contactors

• Bidirectional wireless RF Mesh communications

• Individual addresses of unique serial numbers

• Can work as a fully autonomous system, or remotely managed from a central

system. No central panel required

• Multi-level grouping and multiple scenarios

• Adjustable minimum and maximum dimming levels

• Programmable state after blackout, with peak shaving options

• Blink warning and override before scheduled lights off

• Both locally and remotely controllable with status and metering reporting

• Smart daylight harvesting and motion sensing functions, with occupied and

unoccupied levels including a lamp saver function

• Demand response (load shedding) and emergency mode ready

3.15”

wiSCAPETM 480v fixture ModuleWIRELESS STREET LIgHTINg CONTROLS

WIRELESS

WIR-RM 480

0-10VDIMMING

480VAC

6.3”

3.35”


MODELWIr-rMS wiSCAPE Wireless

Relay - StandardWIr-rMl wiSCAPE Wireless

Relay - Long Range

vOLTAgE480 480VAC


Voltage 480V; 60Hz Less than 2 watts standby consumption

Maximum Load Amperage 6 amps

Phase-cut Dimming Continuous retroactive trailing-edge

Output Status Monitoring Standard feature

Power Metering Amperage - Voltage - Power (2% accuracy), PF, Cum. Energy - Burn-time counters

Options Hi-Lo: Control for HID (Core & Coil) Dual-capacitors

0-10V Dimming For all types of 0-10V drivers & ballasts requiring either to be sunk (up to 200mA) or sourced (20mA standalone or higher w/ext. source)

Standard Inputs 3 Digital: ex: Motion sensor and switch top/bottom buttons (max : 48V) + 1 Analog 0-10V

Additional Outputs 2 Digital (Open-collector up to 48V—max: 20 mA total)

Standard Radio Up to 300 ft between modules

Long Range Radio Up to 1000 ft between modules

Ambient Temperature Range -400F to 1850F (-400C to +850C)

Relative Humidity 0% to 100% non-condensing (fully waterproof packaging option)

Certifications ETL 3192455, UL508 & CSA C22.2 No.14 U.S. FCC Part 15.247 : OUR-XBEE / OUR-XBEE UL94V-0 Flame retardant ABS or Epoxy molding



INPUT/OUTPUTIo Input/

Output

ENCLOSUREN4 NEMA 4

N4480 Io


Hubbell Building Automation's wiSCAPE™ PLC is a communication interface between the

wiSCAPE Keypad and the wiSCAPE Wireless Street Lighting Controls which allows for the

activation of sophisticated lighting scenarios.

PRODUCT fEATURES

• Weatherproof NEMA 4 IP66 enclosure.

• Can be wired up to 75’ from the wiSCAPE Keypad

• Communicates wirelessly with wiSCAPE Fixture Modules.

RATED


IP66

8”

4”

wiSCAPE™ PLCWIRELESS STREET LIgHTINg CONTROLS

WIRELESS

120347VAC

8”

WIR-PLC


MODELWIr-Plc

vOLTAgE120 120 VAC208 208/240VAC277 277VAC347 347VAC


XB RF mesh Signal 2.4GHz – 802.15.4 ISM

Supply Voltage 120, 208, 240, 277 or 347 VAC

PLC Central Carrier Frequency 262kHz

Operating Temperature -4°F to 122°F (-20°C to +50°C)

Construction Rugged design enabling installation in a weatherproof NEMA 4 enclosure

Dimensions 8”L x 8”W x 4”H



WIr-Plc


Hubbell Building Automation's wiSCAPE View™ is an intuitive software platform that can configure, manage, monitor and meter a wiSCAPE Lighting

Control System, all in one easy to use software platform. Using wiSCAPE View the user is able to remotely access multiple wiSCAPE Gateways

individually from one location.

wiSCAPE view™ Graphical System Management Software

• Secured multi-concurrent users login and tractability

• Module configuration and control

• Creation/Editing of the user-defined library of Scenarios - Commands

- Groups - Schedules

• Database management

• Historical data logging of power use, data acquisition modules (pulse

counters, analog and digital sensors and instruments) and history of

commands and scenarios

wiSCAPE™ Software Suite WIRELESS STREET LIgHTINg CONTROLS

wiSCAPE™ Wireless Street Lighting Controls offers a suite of software to man-

age, monitor, and meter your wireless street lighting network.

• Software Configuration of modules

• Scheduling

• Zone Design (Virtual assignment of Relays to Zones)

• Power Monitoring


Data storage: MySQL databaseOperating System: Windows Server 64-bitOperating System: User Desktops, Tablets or LaptopsDesktop Browser and Settings Any browser, no special setting (Active X, registry settings, etc.) and Operating System: Reporting Tools: Exports to Excel and CSV Formats

Hubbell Building Automation's wiSCAPE Enterprise™ is an add on module to wiSCAPE View that allows the user to conveniently combine all of their

Gateways into a single database. wiSCAPE Enterprise allows single sign-on and access to all installed Gateways and provides all of the functionality

of wiSCAPE View.

wiSCAPE Enterprise™ Software


MODELWIr-SS wiSCAPE Software Suite

SOfTWAREVIEW

ENtErPrISEbacNEt

aPP


WIr-SS

HBA offers a web based Graphical User interface for IPOD®, IPAD®, IPHONE®, Android™, Blackberry® or any other Smartphone with a browser.

The wiSCAPE-APP provides control of wiSCAPE devices including:

• Wireless intelligent relays

• Wireless RF controls

• BACnet objects

• Preconfigured Scenarios

wiSCAPE APP

• The interface is web based so it doesn’t require any installation on the client device and is always up to date,

reducing maintenance and support cost to a minimum.

• Being linked to the same SQL database as the wiSCAPE Building Automation System, changes are immediately

reflected on all clients connected.


APP Requirements: wiSCAPE View software. Server running Microsoft IIS Internet or local area network connection

IPOD®, IPAD®, and IPHONE® are registered trademarks of Apple Inc., registered in the U.S. and other countries.

Android™ is a trademark of Google Inc.

BlackBerry® is the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Used under licence from Research In Motion Limited.

Hubbell Building Automation's wiSCAPE BACnet software module allows easy interfacing of wiSCAPE control system and modules with the

Building Automation Systems BACnet.

BACnet was chosen as the integration platform, for integrating with traditional building automating systems, while promoting the use of intelligent

addressable wireless controls & sensors that do not require dedicated control wiring, making it ideal for both new and retrofit projects.

wiSCAPE BACnet Software Module


The wiSCAPE Gateway Cellular Modem is a secure Ethernet gateway ideal for customers

requiring 24/7 broadband connectivity. With simple installation and configuration

requirements, the Gateway Cellular Modem is designed to handle robust, fixed applications

requiring broadband communication speeds and bandwidth.

PRODUCT fEATURES

• Persistent 3G Network

• Connectivity

• Low Power Consumption

• Compact Size for Easy Integration

• Rugged Aluminum Case

• Remote Management and Configuration

• Five-year limited1.1”

wiSCAPETM gateway Cellular Modem WIRELESS STREET LIgHTINg CONTROLS

3”

WIRELESS

WIR-MOD-GPRS

3.7”


MODELWIr-Mod-gPrS GPRS Cell Modem add-on option for

wiSCAPE Gateways


Security IPsec VPN GRE Tunneling Events Reporting Engine Routing Protocols Highly Configurable

Technology HSUPA with fallback to: HSDPA, UMTS, EDGE, GPRS, GSM EV-DO Rev. A with fallback to: CDMA, EV-DO Rev. 0, CDMA 1x, CDMA IS-95

Bands Tri-Band UMTS/HSDPA/HSUPA, 850, 1900, 2100 MHz Quad-Band GPRS/EDGE, 850, 900, 1800, 1900 MHz Dual-Band EV-DO Rev. A, 800, 1900 MHz

Quad-Band UMTS/HSDPA/HSUPA, 850, 900, 1900, 2100 MHz

Host Interfaces Ethernet: 10/100 BASE-T RJ-45 USB Type B5 Pin Mini

Antenna Connections Cellular - 50 Ohm SMA Receive Diversity 50 Ohm SMA

I/O Ports 2

LED Indicators Network Signal Activity Power

Operating Temperature -22°F to 158°F (-30° to +70°C)

Storage Temperature -40°F to 185°F (-40° to +85°C)

Dimensions 3.0”W x 1.1”H x 3.7”L

Weight 7.1 oz

Certifications FCC RoHS PTCRB CE



WIr-Mod-gPrS


The wiSCAPE™ Modem allows the user to wirelessly connect their notebook or

desktop PC to the wiSCAPE wireless street lighting system via their computer’s

USB port. The wiSCAPE Modem allows the user to remotely manage, monitor, and

meter their wiSCAPE System through wiSCAPE View™ software on their computer.

PRODUCT fEATURES

• Low Power Consumption

• Compact Size for Easy Integration

• Rugged Case

• Remote Management and Configuration

• Five-year limited

1.5”

wiSCAPETM Modem WIRELESS STREET LIgHTINg CONTROLS

WIRELESS

WIR-MODEM

2.25”


MODELWIr-ModEM wiSCAPE Modem with USB

Connection


Operating Voltages Powered from USB port

Connector Type USB 2.0 Type B

Communication Type Wireless RF MESH 2.4GHz – 802.15.4 ISM FCC compliant (FCC ID: OUR-XBEE)

Range RF Mesh : 300 ft per hop

LED Indicators Green = Power OK Yellow = Transmitting Red = Receiving

Dimensions 4”L x 2.25”W x 1.5”H



WIr-ModEM


wiSCAPETM Photo SensorWIRELESS STREET LIgHTINg CONTROLS

Hubbell Building Automation’s wiSCAPETM Photo Sensor provides the necessary

daylight-level information to the wiSCAPE Fixture Modules. Using a photodiode

element, this sensor continuously measures daylight levels and sends the information

to the module. The applicable foot-candle range is selected by using a jumper

beneath the front cover.

PRODUCT fEATURES

• Interfaces with Energy Management Systems

• Foot-candle range: 50 - 750FC

• Mounts horizontally




DAYLIGHTHARVESTING

DLCPCO

Correct orientation shown

1.85”

1.35”

24VDC

LOW

VOLTAGE

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC


MODELdlcPco Outdoor Photocell Sensor, 50 - 750FC



Accuracy +/-1% at 70°F (21°C Derated to +/-5% at 120°F or at) F (-18°C to 49°C)

Operating Temperature 13°F to 140°F (-11°C to 60°C)

Sensor Type Blue-enhanced photo diode

Sensor Ranges 50-750FC

Input Voltage 24VDC

Output Voltage 10V full output

Output Offset 0VDC or 1VDC - total darkness

Wiring Three conductors 18-gauge standard cable Red: Pos. DC input Black: DC common Yellow: Output to EMS

Certifications ETL/UL 916 Listed Title 24 Listed RoHS compliant


dlcPco


PRODUCT fEATURES

wiSCAPE™ KeypadWIRELESS STREET LIgHTINg CONTROLS

WIR-KP

• 6 programmable buttons for a total of 6 possible scenarios

• Sends any user-programmable commands to an unlimited number

of receivers

• Compact design to be easily installed in standard electrical boxes

• Fits standard Decorator Style wallplate (sold separately)


Operating Voltage 15-30VDC

Mounting Standard single gang electrical box


Other Requirements: Requires appropriate wiSCAPE PLC for system operation


• Low power consumption

• LED Feedback on each button

• Reprogrammable over the air


MODELWIr-SW-kP6-WH wiSCAPE Keypad

WIr-SW-kP6-WH

The wiSCAPE™ Keypad is designed to be integrated with wiSCAPE Wireless

Street Lighting Controls. The compact and versatile design features 6 buttons,

each capable of being programmed to activate sophisticated lighting scenarios.

In conjunction with wiSCAPE enabled fixtures, a scenario could include a single

fixture or entire groups of fixtures.

As with all wiSCAPE Fixture Modules, the keypad is configured through wiSCAPE

View™ software. Once configured, the keypad will not require the presence of a

computer or central controller on the network.

24VDC

LOW

VOLTAGE


WIRELESS STREET LIgHTINg CONTROLS

End Mount wiSCAPE WASP2 Sensor with Lens option

Hubbell Building Automation’s wiSCAPETM WASP2TM Motion Sensor is specifically

designed for ON/OFF control of street lighting. The motion sensor is also

available for low-mount applications when using the appropriate lens. The sensor

is available in end-mount and surface-mount versions with either single or dual

outputs.

PRODUCT fEATURES


• Supported maximum mounting heights:

• High mount lens: up to 30 ft outdoors; 45 ft indoors

• Multiple (single and dual) output versions

• Unique Smart Cycling™ for improved lamp life

• End-mount and surface-mount versions

• Withstands low temperature and conforms to IP65 water-tight

standards



4.0”



1.5”

wiSCAPE WASP2TM Motion Sensor

OCCUPANCYSENSING

SMART CYCLING

DAYLIGHTHARVESTING

RATED


IP65

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



Power Requirements Low Voltage sensors: 24VDC

User Interface (1) Twelve pin DIP switch

Time Delay Primary: 8-second test mode - 4, 8, 16 and 30 minute timeouts Secondary: Can be disabled (switches off with primary timer) - 30, 60 and 90 minute timeouts

Passive Infrared Dual element pyrometer and spherical Fresnel lens designed for robust detection of a walking person. When used with program start ballast, a 1-2 second delay from occupancy detection to lamp turn-on may be experienced.)

Daylight Sensor Range: 30 – 2500FC End mount sensor: Downward and upward looking daylight sensors (Direction selectable via DIP switch) Surface mount sensor: Downward looking daylight sensor only

Interchangeable Lens Options Lens options: (Lenses sold separately – not included with sensor module) Low Mount/High Mount Indoor/Outdoor Coverage: 360°, 180°, Aisle, Half Aisle

Operating Environment Relative humidity (non-condensing): 0% to 95% Low-temperature/Water-tight/Indoor-Outdoor version: -40° to 149°F (-40° to 65°C)

Construction Sensor Module and Lens Assembly – high impact, injection-molded plastic


Weight 7 oz.

Color White, Black and Gray

Mounting End mount sensor: Mounts directly to end of fixture through extended ½” chase nipple For deeper body fixtures, an optional Extender Adapter (available separately) positions the sensor flush or below the bottom of the reflector for a full field-of-view. Surface mount sensor: Mounts directly to fixture or j-box via (2) 1.25” stainless steel screws and locking nuts

Certifications Conforms to UL STD 508, UL STD 244A Conforms to IP65 (Low-temperature/Water-tight version)



Sensor Lens Coverage and Detection Patterns When Mounted at 30ft


Example: WSP EM 24V LWO – Wasp End Mount Sensor, 24V, Low Temp/Water Tight, White

SENSOR MODELWSP

MOUNTINgEM - End MountSM - Surface Mount

INPUT vOLTAgE 24V - 24VDC (Low Voltage)

LOW-TEMP/ WATER TIgHTlWo - Low-Temp/Water Tight/ Indoor/Outdoor

WSP


for appropriate lens options please reference WASP2 Occupancy Sensor Lens Specification Sheet.

COLORblank - Whitebk - BlackgY - Gray

WSP 24V

Emergency lighting bypass controls

PAgE 212

Emergency lighting is a critical component when laying out a lighting system. The system requirements are defined by local

codes which determine the amount of emergency lighting required to meet minimum lighting levels during a loss of power.

How these levels are attained is dependent on the design of the lighting system. Hubbell Building Automation’s emergency

lighting bypass lighting controls offer several options for emergency lighting applications. All HBA products are specifically

UL listed and labeled for use in emergency lighting.

Providing Safety and Savings


hubbell-automation.comPAgE 214

EMERgENCY LIgHTINg BYPASS CONTROLS

UL924 Enclosed 20 AMP Bypass Shunt Relay

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA 120277

VAC

Hubbell Building Automation’s enclosed 20 Amp electrically held UL 924 Bypass

Shunt Relays provide an isolated normally closed contact that can be used to

provide bypass shunt to power emergency egress lighting directly from the

emergency generator source. The coil in these relays is powered by a normal

power supply.

When the loss of commercial power occurs, the contact returns to its normally

closed state and bypasses control to the emergency egress lighting. These fixtures

will remain connected directly to generator emergency source until transfer back

to normal power occurs.

PRODUCT fEATURES

• 20 Amp 120/277VAC Relay

• N/C isolated contacts

• UL listed



UL924SR

3.75”

1.75”



# Relays & Contact Type One (1) SPST Continuous Duty Electrically Held Coil

Contact Ratings 1500 VA Tungsten @ 120VAC 20 Amp Ballast @ 120/277VAC 2 HP @ 277VAC 1 HP @ 120VAC

Coil Current 0.06 A @ 120VAC 0.06 A @ 277VAC

Coil Voltage Input UL924SR1: 120VAC; 60Hz

UL924SR2: 277VAC; 60Hz

Operating Environment Indoor use only 32° to 140°F Relative humidity (non-condensing): 0% to 95%

Dimensions 3.75”L x 1.75”W x 1.25”H with mounting ears for 1-gang box


Flame Rating UL94V-0

Wires 7”, 105° C, 600V Rated

Certifications UL Listed, UL924


ModElul924Sr1 UL924 N/C Shunt Relay 120/277V, 20A SPST with 120VAC Coilul924Sr2 UL924 N/C Shunt Relay 120/277V, 20A SPST with 277VAC Coil




UL924 Enclosed 20 AMP Bypass Relay with Remote Emergency Control

120277

VAC

Hubbell Building Automation’s enclosed 20 Amp electrically held UL 924 Bypass

Relay is specifically designed for projects requiring bypass utilizing an unswitched

emergency circuit that is not controlled by a relay in a panel or power pack. The

control of the lighting on the emergency circuit is switched ON and OFF based on

the normal circuit switching input to the unit. When the loss of commercial power

occurs, the contact returns to its normally closed state and bypasses control to the

emergency egress lighting.

The unit includes an automatic test function that simulates utility power failure

and holds emergency lighting on for 2.5 seconds each time the switched input is

turned OFF.

PRODUCT fEATURES


• Available with Dual Tap 120VAC or 277VAC Coil


• UL listed



UL924BRUNV

3.75”

1.75”

1.25”

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC



# Relays & Contact Type One (1) SPST Continuous Duty Electrically Held Coil

Contact Ratings 1500 VA Tungsten @ 120VAC 20 Amp Ballast @ 120/277VAC 2 HP @ 277VAC 1 HP @ 120VAC


Coil Voltage Input UL924BRUNV: 120 or 277VAC; 60Hz

Operating Environment Indoor use only 32° to 140°F Relative humidity (non-condensing): 0% to 95%

Dimensions 3.75”L x 1.75”W x 1.25”H with mounting ears for 1-gang box






ModElul924bruNV UL924 Emergency Control Relay (Shunt or Bypass) with

auto test 120-277VAC Coil


ul924bruNV



UL924 Enclosed 20 AMP Automatic Power Transfer Control Relay

Hubbell Building Automation’s enclosed 20 Amp Emergency Power Transfer

Control Relay is a versatile, cost-effective unit, specifically designed for projects

requiring hot and neutral switching of the load from normal circuit to emergency

circuit or that include the requirement that 0-10V dimming circuits be brought to

full brightness during the emergency transfer event.

The unit senses loss or voltage drop of the normal utility source and within 1.5

seconds transfers the load including the neutral to the emergency source. When

power is restored, the unit transfers the load back to normal utility power within 1.5

seconds. An integral momentary test switch simulates utility power failure and can

be activated at any time. Any interruption of normal utility power will automatically

transfer designated emergency lights to full bright regardless of current dim level

or ON/OFF state of the system.

PRODUCT fEATURES



• 0-10V Dimming Control to Full upon Transfer

• UL listed



UL924BRLN

120277

VAC

TITLE

24

CO

MP

LIAN

T

CA

LIFO

RN

IA

CEC

5.25”

2.25”5.25”



# Relays & Contact Type Six (6) SPST Continuous Duty Electrically Held Coil with Time Delay

Contact Ratings 1800 VA Tungsten @ 120VAC 20 Amp Ballast @ 120/277VAC


Coil Voltage Input UL924BRLN1: 120VAC; 60Hz

UL924BRLN2: 277VAC; 60Hz

Operating environment Indoor use only 32° to 140°F Relative humidity (non-condensing): 0% to 95%

Dimensions 5.125”H x 5.125”W x 2.25”D with mounting holes for 4 11/16” deep box






ModElul924brlN1 UL924 Emergency Transfer Control Relay with manual test 120V Coil,

0-10V control

ul924brlN2 UL924 Emergency Transfer Control Relay with manual test 277V Coil, 0-10V control


for use with lX, cX Panels, Power Packs and wiHubb™ Smart Packs.

1 Switched with Normal Load when Normal Power is available. Held ON when Normal Power is not available and Emergency Power is available.

2 Switched with Normal Load when Normal Power is available. Not powered when Normal Power is not available.

INDEXVacaNcY & occuPaNcY SENSorS

LightHawk2™—Dual Technology Wall Switch Sensor featuring IntelliDAPT® ....................................................................................................... 10

LightHawk2—Ultrasonic Wall Switch Sensor featuring IntelliDAPT .......................................................................................................................... 12

LightHawk2—Passive Infrared Wall Switch Sensor featuring IntelliDAPT ................................................................................................................ 14

LightHawk2— Night Light Passive Infrared Wall Switch Sensor featuring IntelliDAPT ........................................................................................... 16

LightHawk2— Dimming Passive Infrared Wall Switch Sensor featuring IntelliDAPT .............................................................................................. 18

OMNI™ Dual Technology Ultrasonic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ........................................................................... 20

OMNI Ultrasonic Ceiling Sensor featuring IntelliDAPT .............................................................................................................................................. 22

OMNI Passive Infrared Ceiling Sensor featuring IntelliDAPT .................................................................................................................................... 24

OMNI Dual Technology Acoustic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ................................................................................. 26

OMNI-BPTM Dual Technology Ultrasonic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ..................................................................... 28

OMNI-BP Ultrasonic Ceiling Sensor featuring IntelliDAPT ........................................................................................................................................ 30

OMNI-BP Passive Infrared Ceiling Sensor featuring IntelliDAPT .............................................................................................................................. 32

OMNI Dual Technology Acoustic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ................................................................................. 34

LightOWL™ Dual Technology Ultrasonic and PIR Wall Sensor featuring IntelliDAPT ........................................................................................... 36

LightOWL Passive Infrared Wall Sensor featuring IntelliDAPT .................................................................................................................................. 38

LightOWL Dual Technology Passive Infrared and Acoustic Sensor featuring IntelliDAPT ..................................................................................... 40

Manual ON | Automatic OFF Passive Infrared Wall Switch Sensor ........................................................................................................................... 42

Automatic Passive Infrared Wall Switch Sensor ........................................................................................................................................................... 44

Digital Programmable Timer ....................................................................................................................................................................................... 46

LVS Series Low Voltage Switches .................................................................................................................................................................................. 48

HBA Tracker ..................................................................................................................................................................................................................... 49

Universal Voltage Power Packs ...................................................................................................................................................................................... 50

Universal Voltage Power Pack with Manual ON|OFF Control ................................................................................................................................... 52

RR1 Line Voltage Auxiliary Relays ................................................................................................................................................................................. 54

RRU—Line Voltage Auxiliary Relays .............................................................................................................................................................................. 56

Ceiling and Wall Mount Sensor Accessories ............................................................................................................................................................... 57

HBA WASP2 Occupancy Sensor ................................................................................................................................................................................... 59

Dimming WASP Occupancy Sensor ............................................................................................................................................................................. 62

WASP Lens Options ....................................................................................................................................................................................................... 65

daYlIgHtINg coNtrolSZone5™ Control Module ............................................................................................................................................................................................... 68

Zone5 Ceiling and Wall Mount Occupancy Sensors .................................................................................................................................................. 70

Zone5 Low Voltage Wall Switches ................................................................................................................................................................................ 72

Zone5 RJ45 Adapter ....................................................................................................................................................................................................... 74

Zone5 Daylight Sensor ................................................................................................................................................................................................... 76

DLC7 Continuous Dimming Control ............................................................................................................................................................................ 78

Photocell Sensors ........................................................................................................................................................................................................... 80

Photocell Controller ......................................................................................................................................................................................................... 82

Luxstat Dimming Control Module ................................................................................................................................................................................ 84

Luxstat ON/OFF Control Module ................................................................................................................................................................................. 86

Luxstat Power Pack ......................................................................................................................................................................................................... 88

Luxstat Single Zone ON/OFF Control Module ........................................................................................................................................................... 90

Luxstat Day/Night Control Module with Clock ........................................................................................................................................................... 92

Luxstat Light Sensor ....................................................................................................................................................................................................... 94

Luxstat Low Voltage Wall Switches ............................................................................................................................................................................... 96

lIgHtINg coNtrol PaNElS LX Lighting Control Panels ........................................................................................................................................................................................... 100

LX Relays ......................................................................................................................................................................................................................... 102

LX Breaker Control Panels ............................................................................................................................................................................................ 104

LX Circuit Relays and Circuit Breakers for LXBC ......................................................................................................................................................... 106

LX Touch Tablet Graphical User Interface ................................................................................................................................................................... 108

LX Terminator ................................................................................................................................................................................................................. 109

LX Building Automation ProtoNode ........................................................................................................................................................................... 110

LX JENsys........................................................................................................................................................................................................................ 112

LX Networked Switch Stations ..................................................................................................................................................................................... 114

LX Keyed Switch Station ............................................................................................................................................................................................... 116

LX Occupancy Sensor featuring IntelliDAPT .............................................................................................................................................................. 118

LX Photo Sensor Control Module and Sensors .......................................................................................................................................................... 120

LX Dry Contact Interface Module ................................................................................................................................................................................ 122

LX Automatic Line Voltage Switches ........................................................................................................................................................................... 124

LX Link Power Module ................................................................................................................................................................................................... 126

LX Router Repeater ....................................................................................................................................................................................................... 128

LX Power Supply ............................................................................................................................................................................................................ 130

LX Enclosure for DIN Rail Modules .............................................................................................................................................................................. 132

LX Panel Wire Way Divider Accessory Kit ................................................................................................................................................................... 133

LX Networked Cable|Riser Rated—Riser Rated Belden 8471 Cable ....................................................................................................................... 134

LX Networked Cable|Plenum Rated—Plenum Rated Windy city Wire 104500 Cable ........................................................................................... 136

CX Series Commercial Lighting Control Panels ......................................................................................................................................................... 140

CX Series Commercial Lighting Control Panel Relays ............................................................................................................................................... 142

CX Dimming Option Card ............................................................................................................................................................................................ 144

CX Series Low Voltage Switches .................................................................................................................................................................................. 145

CX Light Sensor.............................................................................................................................................................................................................. 146

CX Line V Automatic Line Voltage Switches ............................................................................................................................................................... 148

CX Occupancy Sensors ................................................................................................................................................................................................. 150

WIrElESS coNtrolSwiHUBB® Access Point ...................................................................................................................................................................................................154

wiHUBB Access Point 2.0 ...............................................................................................................................................................................................156

wiHUBB Smart Pack ........................................................................................................................................................................................................158

wiHUBB Ceiling and Wall Mount Occupancy Sensors ...............................................................................................................................................160

wiHUBB Switch Stations .................................................................................................................................................................................................162

wiHUBB In-Fixture Module ............................................................................................................................................................................................164

wiHUBB On-Fixture Module ..........................................................................................................................................................................................166

wiHUBB Building Automation System Gateway Interface .........................................................................................................................................168

wiHUBB Antennas and Cables ......................................................................................................................................................................................170

wiHUBB RJ45 Adapter and Cables ...............................................................................................................................................................................172

wiHUBB Daylight Sensors ..............................................................................................................................................................................................174

wiSTAR™ In-Line Switch Module ..................................................................................................................................................................................176

wiSTAR Plug-In Switch Module .....................................................................................................................................................................................178

wiSTAR Light Sensor .......................................................................................................................................................................................................180

wiSTAR Ceiling Mount Sensor .......................................................................................................................................................................................182

wiSTAR Wall Mount Ceiling Sensor ..............................................................................................................................................................................184

wiSTAR Key Card Switch ................................................................................................................................................................................................186

wiSTAR Wall Switch .........................................................................................................................................................................................................188

wiSCAPE™ Gateway ......................................................................................................................................................................................................192

wiSCAPE Fixture Module ...............................................................................................................................................................................................194

wiSCAPE 480V Fixture Module .....................................................................................................................................................................................196

wiSCAPE PLC ..................................................................................................................................................................................................................198

wiSCAPE Software Suite ................................................................................................................................................................................................200

wiSCAPE Cellular Modem .............................................................................................................................................................................................202

wiSCAPE Desktop Modem ............................................................................................................................................................................................204

wiSCAPE Photo Sensor ..................................................................................................................................................................................................206

wiSCAPE Key Pad ...........................................................................................................................................................................................................208

wiSCAPE WASP2 Motion Sensor ..................................................................................................................................................................................209

EMErgENcY bYPaSS coNtrolS

UL924 Enclosed 20 AMP Bypass Shunt Relay ............................................................................................................................................................ 214

UL924 Enclosed 20 AMP Bypass Relay with Remote Emergency Control ............................................................................................................. 216

UL924 Enclosed 20 AMP Automatic Power Transfer Control Relay ....................................................................................................................... 218

Alera Lighting

Architectural Area Lighting

Beacon Products

Columbia Lighting

Compass Life Safety

Devine Lighting

Dual-Lite

Hubbell Building Automation

Hubbell Industrial

Hubbell Outdoor

Kim Lighting

Kurt versen

LiteControl

Norlux/TRP

Prescolite

Progress Lighting

Security Lighting Systems

Spaulding Lighting

Sportsliter Solutions

Sterner

Whiteway

701 Millennium Blvd.greenville, SC 29607hubbelllighting.com

9601 Dessau Road | Building One | Austin, Texas 78754 | 512-450-1100 | 512-450-1215 fax | www. hubbell-automation.com

2014 HBA Product Catalog

Documents

Transcript of 2014 HBA Product Catalog