2013 Master Product Catalo ueg 2013 Master Product Catalogue · 2013 Master Product Catalogue. 1...

2013 Master Product Catalo gue

7-2, SUEHIROCHO 1-CHOME, OHME, TOKYO, 198-8760, JAPAN

PHONE : (81)-428-32-6118 FAX : (81)-428-32-6145

Email : [email protected]

[email protected]

www.yamabiko-corp.co.jp/shindaiwa-global/

Specifications, descriptions, and illustrative materials in this literature are as accurate as known at the time of publication, but are subject to change without notice.Illustrations may include optional equipment and accessories, and may not include all standard equipment.©2013 YAMABIKO Corporation All Rights Reserved

2 0 1 3 M a s t e r P r o d u c t C a t a l o g u e

1

The World's Best in Traditional and Innovative Technology

1

Japan Technology consistsof three core competencies


Advanced Technology

Vertical Integration and

In-House Manufacturing

Yamabiko Corporation is famous for our many “world’s first” innovations over the years. It started with the first backpack brushcutter in 1960 and has continued ever since. Our focus is on developing world class products which are known for their light weight, power and maneuverability. Recently, global markets have begun demanding products with lower exhaust emissions. We have used our technological capabilities to become the global leader in the development of reduced emissions engines.

Our production philosophy is based on vertical integration, which allows us to control the manufacturing processes from raw materials all the way to finished products. This even applies to internal components such as gears and electronics. We utilize lean manufacturing techniques and the latest equipment to optimize efficiency, which is critical to maintain global competitiveness. Our products are assembled using both state-of-the-art robotics and skilled workers, resulting in the highest, repeatable quality standards, which can only come from Yamabiko.

2 3


Global Production

C O N T E N T S

Find these marks for "New" and "Unique" or "Useful" features.

EZ-Lock system

Adjustable cutter clearance

Model certified for RoHS

Super Anti-Vibration system

Choke with automatic fast idle

Model certified for CCC

Soft-start

Ventilated back pad

Rotatable handle

Digital controlled CDI

Heavy duty air filter

Non-adjustable cutter clearance

Side access chain tensioner

New Model

C4 Technology engine

G-FORCE Engine Air Pre-Cleaner™

Optional spike

Model certified for CE

Low-Tone model

Tip guard

Chain Saws· Top Handle Saws · Rear Handle Saws· Chain Saw Accessories

6

Trimmers / Brushcutters· Trimmers and Brushcutters · Clearing Saw· Backpack Brushcutters· Cutting Heads & Blades Reference Chart

18

Hedge Trimmers· Double-sided Hedge Trimmers· Single-sided Hedge Trimmers · Shafted Hedge Trimmers

30

Blowers · Handheld Blowers · Backpack Blowers

36

Other Products· Multi-tool System· Pole Pruner Pole Pruner Attachments

· Engine Sprayers · Manual Sprayers· Engine Cutter · Spreaders

40

Accessories 47Specifications 48YAMABIKO Information 54

Japan Technology 6, 18, 30, 36

C4 Engine 14

Analysis 46

Special Interview

4 5

Over the years Yamabiko has produced over 55 million engines*. Currently, Yamabiko has three production facilities in Japan, (Morioka, Yokosuka and Hiroshima) one in China (Shenzhen) and one in the United States (Illinois). Production in all plants is based on the same “quality first” standards, resulting in consistent, high quality products. As a result, our worldwide customers have come to rely on the performance and high quality of all Yamabiko products.

*As of March 2011

76

Chain SawsHigh quality and user-friendly performance

The choice of Chain Saws in 2013: "390SX"

n Chrome plated cylinder with Y-port system (Patent Pending) for extremely better durability, lower emissions and better fuel economy

n Great power to weight ration Heavy duty 2-piece crank shaft n Magnesium crank case for light weight and

extended durability n G Force Engine pre air cleaner system

It is engine performance which determines the quality of chain saws. An engine with high displacement will increase engine power proportionally, which, on the other hand, will make it more difficult to confirm to emission regulations. Therefore, we set a target – “Reduced emission and increased power.”While conventional chain saws with equivalent engine displacement have an output of 63ps per liter, we set a target of more than 65ps per liter for “390SX”. We are proud that the “Japan Technology” label represents the highest level engine development. However, from a fundamental viewpoint, we realized we must investigate closely each part for improvement and took various new approaches. As a result, we reduced harmful substances to one-third and, moreover, achieved an output of 67-68ps per liter, which is much higher than our target.Pursuing not only “power” and “conformity to emission regulations”, but also usability remain characteristics of our products. It may be the case that when replacing machines, usability changes between former models and current products become a concern. Taking this into consideration, we worked on maintaining the user friendly features of conventional models as much as possible. We are sure that you will like “390SX” which has the same usability, high power, and speed compared to conventional models.

Takamasa OTSUJIEngineer

Talks about 390SXNever compromise on usability

which does not show up on figures

High Power & Excellent cutting performance

kW

rpm

Power in operation390SX

389S

Aluminum front handle

Dual post front guard

Soft-start

390SX389S

Great power to weight ratio

kW/kg

11%UP!

269TCS

269TS

n Engine displacement : 26.9cm3

n Output : 0.86kW / 1.17ps n Dry weight*1 : 2.9kgn Bar Size : 25, 30cm / 10, 12in (269TS)

25cm / 10in (269TCS)

269TCS

photo / 269TS

320TS


n Output : 1.36kW / 1.85ps n Dry weight*1 : 3.5kgn Bar Size : 30, 35cm / 12, 14in

305S



352S



360n Engine displacement : 35.2cm3

n Output : 1.40kW / 1.90ps n Dry weight*1 : 4.0kgn Bar Size : 40cm / 16in

377n Engine displacement : 37.7cm3


*1 : Without guide bar and saw chain

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

Rear Handle Saws

Top Handle Saws

8 9

n High power & excellent cutting performance

n Newly-designed Stage 2 emission- compliant engine

n Great power to weight ratio n G-FORCE air cleaner system &

Large air filter n Rotating chain catcher n Soft start n Unique chain tensioner

I have tried many different brands in my life. A few years ago, I decided to buy only Shindaiwa since I have found them to be far better than all others. They start when you need them and require almost no maintenance. Just one problem: never lend them to your neighbours, or you will have a lot of difficulties getting them back.

User Comment

Shindaiwa's gear is my best partner.

Yves PouppezPrivate ownerBelgium

BestSeller

n Engine displacement : 38.4cm3 n Output : 1.90kW / 2.58psn Dry weight*1 : 4.5kg n Bar Size : 33, 38cm / 13, 15in

390SX

389S


n Output : 1.70kW / 2.31ps n Dry weight*1 : 4.5kgn Bar Size : 33, 38, 40cm / 13, 15, 16in

photo / 452S

452S


n Output : 2.26kW / 3.07psn Dry weight*1 : 4.6kg (452S), 4.8kg (452GS)

n Bar Size : 33, 38, 40, 45cm / 13, 15, 16, 18in

452GSWith heated handle function

488


n Output : 2.26kW / 3.07ps n Dry weight*1 : 4.9kgn Bar Size : 33, 38, 40, 45, 50cm / 13, 15, 16, 18, 20in

488P



490


n Output : 2.28kW / 3.10ps n Dry weight*1 : 4.8kgn Bar Size : 33, 38, 40, 45, 50cm / 13, 15, 16, 18, 20in



577



598

577P




HD air filter

HD air filter

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

10 11

n Long stroke engine equivalent to 80 cc class saws-durability and torque

n Separately located carburetor and air cleaner case for vibration free carburetion and improved maintenance efficiency

n Aero dynamic air passage and dust discharge for cleaner intake air

n Optional second spike bumper for additional support for tough cutting

I began selling Shindaiwa and ECHO machines a few years ago. In the beginning, I was not really convinced, having a long experience with another European brand. I decided to test just one machine, their top handle saw. The test performed so well that today I sell only these machines. Indeed, these machines are really selling more than any others. I am also very happy with the service. Nice people, really professional and efficient service but in a friendly way and without unnecessary pressure. I feel really at home being part of such a team. Doing business that way is a pleasure.

User Comment

Shindaiwa's gear is my best partner.

NeulebartDealerBelgium

757


n Output : 4.06kW / 5.52ps n Dry weight*1 : 6.8kgn Bar Size : 45, 50, 60, 70cm / 18, 20, 24, 28in

757C


n Output : 4.06kW / 5.52ps n Dry weight*1 : 6.6kgn Bar Size : 45, 50, 60, 70cm / 18, 20, 24, 28in

n Engine displacement : 59.8cm3 n Output : TBDn Dry weight*1 : TBD n Bar Size : 45, 50, 60cm / 18, 20, 24in

600SX


HD air filter

Chain Saw Accessories

Model Parts Number Type

577, 577P22150-97310 Spike bumperC304-000170 Long spike

598, 600 P021-034090 Clutch cover spike

75722169-97320 Double spike22169-97330 Clutch cover spike

• For small gas or electric saws.Good for light firewood cutting.

Standard Guide Bars(Description code FSN and PRO)

• For high-speed, light-weighpro chain saws.

• Good for tree harvesting, firewood and pulpwood cutting, and heavy farm use.

Pro-Lite Bars(Description code ProLite)

Bar Selection

• For small gas or electric saws.Good for pruning and light firewood cutting.

Carving Bars(Description code FSN and PRO)

Optional Spikes

Guide Bar Saw Chain

Model Gauge(in) Pitch (in) Length(cm) Parts Number Number of Drive Links Oregon Type Part Number Carlton Type

269TS 0.050 3 / 825 X121-000080 42

91VG X221-000020N1C-BL

91PX X221-00011030 X122-000171 47 91PX X222-000140 N1C-BL

269TCS 0.050 1 / 4 25 X101-000090 60 25AP 431610-10030 −

320TS 0.050 3 / 830 X122-000171 47 91PX X222-000140 N1C-BL35 X123-000271 53 91PX X223-000130 N1C-BL

305S 0.050 3 / 830 X122-000171 47 91VXL X222-000140 N1C-BL35 X123-000271 53 91VXL X223-000080 N1C-BL

352S, 360 0.050 3 / 835 18132-01424 52 91PX X223-000070 N1C-BL

40 X124-000440 5791VG 431011-39530

N1C-BL91PX X224-000080

377 0.050 0.325 40 X124-000450 66 95VPX 431711-60031 K1NK-BL

390SX 0.050 0.32533 X122-000320 56 95VPX X242-000000

K1NK-BL38 X123-000520 64 95VPX X243-000000

389S, 452S, 452GS,488, 488P, 490

0.058 0.325

33 18172-01302 5621BP 431713-30230

K2L21BPX 431713-30231

38 18172-01504 6421BP 431721-30230

K2L21BPX 431721-30231

40 X124-000460 66 21BPX X244-000041 K2L452S, 488, 488P, 490

0.058 0.325 45 X125-000150 72 21BPX 431717-30231 K2L

488, 488P, 490 0.058 0.325 50 X126-000110 7821BP X246-000080

K2L21BPX X246-000081

598, 600 0.058 3 / 8 50 X126-000080 72 73LGX 431012-30831 A2LM

600SX 0.058 3/845 TBD 64 73LPX TBD A2LM-BL50 TBD 72 73LPX TBD A2LM-BL60 TBD 84 73LPX TBD A2LM-BL

577, 577P, 757, 757C

0.058 3 / 845 X125-000160 68 73DP X265-000010 A2EP-BL50 X126-000130 72 73DP 431012-32630 A2EP-BL60 X128-000030 84 73DP 431013-31730 A2EP-BL

757, 757C 0.058 3 / 8 70 X130-000010 89 73DP X270-000030 A2EP-BL

For original fit-ups and replacement – these bar and chain combinations meet CE compliance for low vibration.

Guide Bar & Chain-Chain Saw Models

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

12 13

14 15

C4 ENGI NE Compression - Charged - Clean - Combustion

High power and Lower gas emissionsBy combining the high power-to-weight ratio and compactness of a 2-stroke engine with the precise fuel metering of a 4-stroke, Shindaiwa engineers have successfully developed hybrid engine that delivers the best of both worlds : the lightweight, high-torque, multi-position characteristics and great acceleration of the 2-stroke ; and the low noise, increased fuel economy, and dramatically reduced exhaust gas emissions of 4-stroke.

EngineerKenji SUZUKI

We will develop the world’s first 4-stroke engine that uses mixed fuel. This same commitment motivated us during the 15 years we developed the C4 engine.C4 is a hybrid engine that combines the advantages of both 2-stroke engines and 4-stroke engines. The features of the C4 engine include cleaner emissions, better fuel consumption, higher torque at low speed, and more. Four-stroke engines require more parts than 2-stroke engines, which results in the need for lighter weight components. C4 engines are used in portable machines such as hedge trimmers and brushcutters. Engines need to work steadily without a decrease in performance when used in any condition. Very few manufacturers can develop these small engines. Shindaiwa made huge strides to develop the only engine like it in the world. The C4 engine has a more complex and longer path through which fuel flows to the combustion chamber compared to normal 4-stroke engines. When fuel does not sufficiently lubricate each part or the air-fuel mixture does not go through the route smoothly, the engine does not work properly or, in the worst case, does not even start. The key to success is to make prototypes and move steadily forward even if we sometimes return to the starting point. The best direction cannot be found only by computer simulation. Repeated trials and errors are also essential.In the future, C4 engine applications, which originated in Japan, will expand. We are excited about this prospect.

Aspire to develop engine technology which does not exist today.

1716

Combining the best features of 2 and 4-stroke engines!

Generate wider power bandAs characteristic in a 4-stroke engine, C4 technology engines provide a better power curve for most cutting applications. C4 generates higher torque and a wider power band. Of course, since the C4 engine runs on the 4-stroke principle, its exhaust gas emission level is quite low with better fuel consumption than conventional 2-stroke engines!

Run with fuel mixC4 TechnologyTM

EngineConventional

2-cycle Engine

Power Curve Comparison

T2510XProduct_P.21 Spec._P.51

C2510Product_P.21 Spec._P.51

T3410Product_P.22 Spec._P.51

C3410Product_P.22 Spec._P.51

HT2510-30 / HT2510-40Product_P.33 Spec._P.51

DH2510-24 / DH2510T-30 Product_P.32 Spec._P.51C4 ENGINE

Series

EB8520RTProduct_P.39 Spec._P.53

EB3410Product_P.38 Spec._P.52

EB2510Product_P.38 Spec._P.52

AHS2510Product_P.34 Spec._P.51

M2510Product_P.40 Spec._P.52

AH2510Product_P.35 Spec._P.51

As characteristic in a 2-stroke engine, C4 technology engines are fueled by conventional 50:1 petrol/oil mixture. It is not necessary to check the oil level. Thanks to its lubrication system, a C4 technology engine can be operated in any position, including upside down!

18 19

Compact engine design.

Large tank opening reduces spillage. Easy to refuel.

Ergonomic designed handle for easier, more comfortable operation.

8 mm hollow splined mainshaft. Reduces weight.

All-in-one control handle features convenient On/Off switch & throttle lock-out lever.

4-bolt, closed ported and chrome-plated cylinder for durability, lower emissions, and better fuel economy.

One-piece electronic ignition for fast, easy starts.

Unique Features of Shindaiwa Trimmers / Brushcutters

Trimmers/BrushcuttersHigh quality and user-friendly performance

Seiji ISHIHARAEngineer

Our theme when designing Shindaiwa products is “Machinery for professional users designed by professionals.” It is always top of mind that our products support our customers’ jobs and their lives.There are only a few manufacturers in the world who can develop both 2-stroke and 4-stroke engines which conform to emission regulations for products used by professional users. Designing all parts internally is the biggest advantage of our company. Our development system allows us to quickly incorporate customers’ needs, such as light weight and easy grip handles.Products for professional users must have strength and durability. The added challenge is keeping the balance between power, maneuverability and lightness of weight while pursuing low vibration and low noise, and we have been working on further improvements to provide reliable products which cause less wear on users. Some products require approximately 4 years from development to production. Experiences acquired through repeated tests have provided unique knowledge only our company possesses. “Japan Technology”, accumulated through years of experience, is built into each product. Our staff members in various departments, including engineers, sales reps, and service reps, all work towards the goal of providing “excellent products.” Feedback from customers, such as “very good products”, support our commitment for further advancement.

Keep providing machinery for professional users designed by professionals

Ergonomic design 8° offset handle, with enhanced vibration absorption.

Loop handle

LOOP HANDLE

LOOP HANDLE

F220n Engine displacement : 21.1cm3

n Output : 0.69kW / 0.94ps n Dry weight*1 : 4.2kg

F226S



T220n Engine displacement : 21.1cm3


T226S


n Output : 0.70kW / 0.95psn Dry weight*1 : 4.8kg (T226S), 4.9kg (C226S)

C226S

T230XR


n Output : 0.74kW / 1.01psn Dry weight*1 : 4.6kg (T230XR), 4.9kg (C230)

C230

photo / C230

photo / C242S

T242XS



C242S

photo / C226S

*1 : Without cutting attachment and shield

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

LOOP HANDLE LOOP HANDLE

photo / C260

T260X


n Output : 0.90kW / 1.22psn Dry weight*1 : 5.4kg (T260), 5.5kg (C260)

C260

T2510X


n Output : 0.80kW / 1.09psn Dry weight*1 : 5.2kg (T2510X), 5.3kg (C2510)

C2510

photo / C2510

LOOP HANDLE

Trimmers and Brushcutters

20 21

LOOP HANDLE

LOOP HANDLE

LOOP HANDLE

C270


n Output : 1.10kW / 1.50ps (T270,C270)

1.00kW / 1.36ps (C300)

n Dry weight*1 : 5.6kg (T270), 6.2kg (C270), 6.5kg (C300)

C300

T270

T310S


n Output : 1.00kW / 1.36psn Dry weight*1 : 6.1kg (T310S), 6.5kg (C310S)

C310S

C35LAn Engine displacement : 33.6cm3


T350



C350

photo / C270


Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

photo / C310S

photo / C350

T410S


n Output : 1.60kW / 2.18psn Dry weight*1 : 8.1kg (T410S), 8.7kg (B410S)

B410S

LOOP HANDLE

T3410



C3410

LOOP HANDLE

photo / C3410 photo / B410S

photo / B450

B450


n Output : 1.60kW / 2.18ps (B450), 1.70kW / 2.31ps (B450R)

n Dry weight*1 : 7.7kg (B450), 8.1kg (B450R)

B450RB45LAn Engine displacement : 41.5cm3


22 23

Clearing Saw

CL590



RCL590



CL520



B530 n Engine displacement : 53.2cm3

n Output : 1.90kW / 2.58ps (EU), 2.30kW / 3.13ps (Basic)

n Dry weight*1 : 9.5kg (EU), 9.4kg (Basic)

Basic

B530

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

BP35n Engine displacement : 33.6cm3


BP40LAn Engine displacement : 33.6cm3


BP420S



BP520S



BP530



Backpack Brushcutters


Newly designed harness and quicker hook up supports comfortable operation.

Flash Hook Up

Product_P.47

Touch-less Lever

Anchor-Shape 10+35 Degree

24 25

Cutting Heads & Blades Reference Chart

Item Number

For Europe Asia and othersl : Standardu: Optional

F226S T226S C226S T242XS C242S T2510X C2510 T310S C310S T3410 C3410 T350 C350 T410S B410S B530 BP420S BP520S BP530 CL520 CL590 RCL590 SBA-TX24-1 F220 T220 T230XR C230 T260X C260 T270 C270

C300 C350 C35LA B450 B450R B45LA B530 BP35 BP40LA

− − − 7 mm LH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH − − 10 mm LH − − 8 mm LH − − − 7 mm LH 8 mm RH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 8 mm LH 8 mm LH

TAP FEED HEAD

G137 100 X047-000550 l

G138 500 X047-000560 l u

DS-5 M10L X047-000220 l l

Z5

78820-15000 l

X047-000740 u u u u u u

B6 X047-000460 u u

U6 78820-14000 u u l u

UN-34-8L X047-000790 u

UN-34-7L 67000-65010 u u u u u u

TAP FEED HEAD

78820-04000 u u u u u u

78820-05000 u

SPEED-FEED HEAD

SPEED-FEED 375

X047-000632 l l l l u l

(AUS) u u u u

X047-000622

l(AUS,RUS)

SPEED-FEED 450 X047-000581 l l l l l u u u u u u u u u u u

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

26 27

Cutting Heads & Blades Reference Chart

Item Number

For Europe Asia and othersl : Standardu: Optional

F226S T226S C226S T242XS C242S T2510X C2510 T310S C310S T3410 C3410 T350 C350 T410S B410S B530 BP420S BP520S BP530 CL520 CL590 RCL590 SBA-TX24-1 F220 T220 T230XR C230 T260X C260 T270 C270

C300 C350 C35LA B450 B450R B45LA B530 BP35 BP40LA

− − − 7 mm LH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH − − 10 mm LH − − 8 mm LH − − − 7 mm LH 8 mm RH 7 mm LH 7 mm LH 7 mm LH 8 mm LH 8 mm LH 8 mm LH 8 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 10 mm LH 8 mm LH 8 mm LH

3-CUTTER METAL BLADE

Ø230*t3.0*25.4 X405-000320 u l

Ø250*t2.2*25.4 X040-000080 u u u u u u u u u u u u u u u u u u u u u u u u

Ø255*t3.0*25.4 X405-000151 u u u u u u u u u u


Ø255*t2.2*25.4 X405-000330 u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u


Ø255*t2.0*25.4 X405-000350 u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u

CLEARING SAW BLADE

Ø200*t2.0*25.4 695001-51530 l

For use on grasses and weeds

For use on grasses and weeds

Eight-toothed blade offers cleaner cuts.

For use on thick saplings and dense thicket

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

Specialty trimmer line

ARMORLINE trimmer line, available in both round or square configurations, is double-extruded to combine a tough, inner core with a hard outer shell. Result: remarkable cutting properties.

• The pliable inner core is made of high-durability, 100% virgin polyamide to permit the line to flex when necessary.

• The tough outer shell is made of a reinforced composite material that resists impact and abrasion.

Silentwist® trimmer line, reduces wind resistance and noise. Reduced wind resistance means trimmers operate more efficiently for better fuel consumption.

• To ensure quality, Silentwist® line is made with innovative, 100% virgin polyamide monofilaments.

• Use Silentwist® line where noise abate-ment is a requirement.

Warning: A standard trimmer should never be operated with blade-type attachments. A blade-equipped machine must be fitted with barrier bar or a bicycle-type handlebar and a harness or strap.

Brushcutter blades

Best for grass, light brush, and shrubs. Reversible for longer life.

For dense weeds, vines, and undergrowth.

For undergrowth and thinning small saplings.

For undergrowth and thinning medium saplings.

Suitable cutting objects from grass to saplings

Speed-Feed Trimmer Head

• Reload trimmer line in 30 seconds or less!

• Easy to load, no disassembling of head required when loading trimmer line.

• Rugged, reliable semi-automatic head for medium- to heavy-duty applications.

• Index line by tapping the bottom of the head on the ground.

• Smooth bottom enables the head to glide along the ground.

• Head is pre-wound with 2.4 mm Silentwist ® trimmer line.

knob

eyelet

Speed-Feed 450 Trimmer HeadSpeed-feed 450 fits all straight shaft Shindaiwa trimmers and brushcutters. Especially better fit up with a 25 cm3 displacement or bigger engine.

Speed-Feed 375 Trimmer HeadSpeed-feed 375 is smaller in diameter, lighter than speed-feed 450, and provides better fit up with a 25 cm3 displacement or smaller engine.

Feed approximately 4 meters of trimmer line through eyelet.

Step 2

Align arrow on knob with eyelet.

Step 1Reload by simply turning large

knob on top of trimmer head and cutting line to equal lengths.

Step 3

Square trimmer line

Medium Clamshell 525002 C2070191 2.5mm x 31m

Large Clamshell

525001 C2070192 2.5mm x 63m

530001 C2070193 3.0mm x 44m

535001 C2070194 3.5mm x 32m

Super Spool

525003 C2070195 2.5mm x 189m

530003 C2070196 3.0mm x 132m

535003 C2070197 3.5mm x 97m

Giant Spool 530005 C2070198 3.0mm x 219m

Small Clamshell 425015 C2070199 2.5mm x 15m

Medium Clamshell 430002 C2070201 3.0mm x 28m

Large Clamshell

425001 C2070202 2.5mm x 80m

430001 C2070203 3.0mm x 56m

435001 C2070204 3.5mm x41m

Super Spool

425003 C2070206 2.5mm x 241m

430003 C2070207 3.0mm x 168m

435003 C2070208 3.5mm x 123m

Giant Spool 430005 C2070209 3.0mm x 279m

Round trimmer line

Small Clamshell

620015 C2070210 2.0mm x 15m

624015 C2070211 2.4mm x 15m

626515 C2070212 2.65mm x 15m

Medium Clamshell

624001 C2070213 2.4mm x 86m

626501 C2070214 2.65mm x 71m

28 29

3130

Hedge TrimmersHigh quality and user-friendly performance

Hedge trimmers are often used almost all year round regardless of seasons. Especially for Shindaiwa which are products for professional users, ensuring durability is the most important theme. However, simply pursuing durability may result in bigger and heavier products, which will worsen work efficiency. For professional users, work efficiency will be vital.Since our products have been highly rated for durability, we place much value on the idea that “lightweight is power” and promote product developments. We have developed some of the world’s lightest products in the past. In fact, light and easy-to-use products offered many benefits, such as improved accuracy of operation and lessened workloads.We assume that it is common for all industries that the best part of manufacturing is to create values which do not exist in the market. As for hedge trimmers, we can find many tasks to solve, such as reduced vibration and improved environmental performance. With this in mind, creating additional values which will amaze and impress users is our mission and also plays a critical role in Japanese manufacturing. Seeing that we have developed the world-first 4-stroke engine compliant with emission regulations, this culture is built into Shindaiwa. We are determined to keep on producing products which will bring a paradigm shift to our industry, and exceed our customers’ expectations.

Hisao KODAMAEngineer

Generate additional value which impresses our customers

Unique Features of Shindaiwa Hedge Trimmers

Heavy-duty gear case

Rotatable rear handle :3 positions.

Blade sharpened on three edges

Light weight but durable engine.

Easy-to-Pull recoil system.

4-stroke engine compliant to emission regulations (DH2510&HT2510).

DH2510 HT2510

30

Double-sided Hedge Trimmers

PRC

Basic

Basic

HT230-30


n Output : 0.75kW / 1.02 ps (HT230)

0.80kW / 1.09ps (HT230-30,HT230-40)

n Dry weight : 5.6kg (HT230), 5.5kg (HT230-30), 6.0kg (HT230-40)

n Effective cutting length : 693mm (HT230,HT230-30)

1008mm (HT230-40)

HT230-40

HT230

HT230

PRC

Basic

DH230-24


n Output : 0.75kW / 1.02 ps (DH230)

0.80kW / 1.09ps (DH230-24,DH230-30)

n Dry weight : 5.7kg (DH230), 5.5kg (DH230-24), 5.8kg (DH230-30)

n Effective cutting length : 519mm (DH230,DH230-24)

659mm (DH230-30)

Basic

DH230-30

DH230

DH230

photo / HT230-30

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

Single-sided Hedge Trimmers

photo / 22DH

DH2200ST


n Output : 0.59kW / 0.80psn Dry weight : 4.6kgn Effective cutting length : 484mm

DH220


n Output : 0.60kW / 0.82ps (DH220)

0.68kW / 0.92ps (22DH)

n Dry weight : 4.7kg (DH220), 4.5kg (22DH)

n Effective cutting length : 428mm (DH220), 521mm (22DH)

22DH

photo / HT2510-30

HT2510-30


n Output : 0.76kW / 1.03psn Dry weight : 5.79kg (HT2510-30), 6.14kg (HT2510-40)

n Effective cutting length : 693mm (HT2510-30), 1008mm (HT2510-40)

HT2510-40

DH2510T-24


n Output : 0.76kW / 1.03psn Dry weight : 6.29kg (DH2510T-24), 6.44kg (DH2510T-30)

n Effective cutting length : 519mm (DH2510T-24), 658mm (DH2510T-30)

DH2510T-30

photo / DH230

photo / DH2510T-24

32 33

Shafted Hedge Trimmers

Short Reach

AH230S


n Output : 0.80kW / 1.09ps n Dry weight : 5.9kgn Overall length : 2355mm n Effective cutting length : 520mm

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

Long Reach

~90°

180°

Foldable arms

(Long Reach only)

Angle adjustment

system works per 15°

~45°

AHS242S



AHS2510



AH242S


n Output : 0.80kW / 1.09psn Dry weight : 6.2kg n Overall length : 2365mm n Effective cutting length : 520mm

AH2510


n Output : 0.80kW / 1.09psn Dry weight : 6.3kg n Overall length : 2365mm n Effective cutting length : 520mm

34 35

3736

The choice of Blowers in 2013: "EB220S"

Heavy duty 2-stage air cleaner

Cruise control throttle system for constant engine speed during operation.

Convenient second handle for operator comfort.

Unique engine layout provides balance and also prevents clothes from being sucked in.

BlowersHigh quality and user-friendly performance

ULTRALight

Masayuki TAKANOEngineer

“EB220S” is the product which has reached a higher level for our manufacturing and put much value on “usability for customers”. The greatest characteristic is considerable weight savings. While conventional models of the same class weigh approximately 4.5kg, the “EB220S”, with “Japan Technology” incorporated, has the weight of approximately 3kg. For not only professional users, but also women and elderly people, it is the product which lessens workloads.The biggest challenge in developing the model was how to maintain power while reducing weight considerably. Then we started to “downsize the engine.” We reviewed the engines installed on the conventional blowers from scratch and developed a new model.We reviewed the “EB220S” design itself by once again investigating closely each part. Introducing a newly designed handle is one example. Adding a second handle at the lower part of the machine allows users to grip firmly with both hands, which improves stability and lessens workloads for users.We know that many users are dissatisfied with compact, but powerless electric blowers. It is the usability and powerful performance of the“EB220S” which satisfies users’ expectations.

Talks about EB220SRealizing considerable weight savings

by reviewing the engine itself

Handheld Blowers

n Ultra lignt handheld blowern Adjustable “cruise control throttle” for

reduced fatiguen Comfortable rubber handle gripn Once you press the switch, the engine

stops! Not necessary to keep pressing the switch

n Flat-nozzle and round-nozzle are available with or without joint pipe to customize work

n Right side air intake location prevents clothes being sucked in

Backpack Blowers

Unique engine layout is for best balance and also prevents clothes from being sucked in.

Covenient sub-grip for operator comfort.

Heavy duty 2-stage air cleaner

Cruise control throttle system for constant engine speed during operation.

n Engine displacement : 21.1cm3 n Output : TBDn Dry weight*1 : TBD n Max air volume*2 : TBD n Max air speed : TBD

EB220S

EB240S


n Output : 0.70kW / 0.95ps n Dry weight*1 : 4.2kgn Max air volume*2 : 522m3 / h n Max air speed : 74.2m / sec

EB8520RT

n Engine displacement : 79.7cm3 n Output : 3.33kW / 4.53psn Dry weight*1 : 12.5kg ( Ø 74pipe), 12.6kg ( Ø 65pipe)n Max air volume*2 : 1260m3 / h ( Ø 74pipe), 1140m3 / h ( Ø 65pipe)n Max air speed : 85m / sec ( Ø 74pipe), 95m / sec ( Ø 65pipe)

EB2510


n Output : 0.86kW / 1.17ps n Dry weight*1 : 5.25kgn Max air volume*2 : 426m3 / h n Max air speed : 79m / sec

EB3410


n Output : 1.10kW / 1.50ps n Dry weight*1 : 5.6kgn Max air volume*2 : 474m3 / h (Round pipe), 486m3 / h (Flat pipe)

n Max air speed : 87m / sec (Round pipe), 86m / sec (Flat pipe)

n Engine displacement : 79.2 cm3 n Output : 3.14kW / 4.27psn Dry weight*1 : 11.4kgn Max air volume*2 : 1181m3 / h ( Ø 74pipe)n Max air speed : 82m / sec ( Ø 74pipe)

EB803

EB803RT

*1 : Unit with blower pipe *2 : At actual usage point

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

photo / EB803RT

38 39

Trimm

ersBrushcutters

Blowers

Chain Saws

Hedge Trimm

ers

4140

Other Products

Trimmer Attachment Hedge Trimmer Attachment

Hedge TrimmerAttachment(Without outer tube)

Pole Pruner AttachmentPole PrunerAttachment(Without outer tube)

Lawn Edger AttachmentPower Broom Attachment

SBA-TX24-1 #65001 SBA-AH2422 #65003 SBA-AHS2422 #78703 ATT-AH230/CE SBA-P24 #65002 ATT-P230/CE SBA-LE24 #65010 SBA-PS24

Configuration EU Basic EU Basic EU Basic − EU Basic − EU Basic EU

Dry weight (kg)

0.8(w / o Cutting

attachment and Shield)

0.8(w / o Cutting

attachment and Shield)

2.2 2.2 2.1 2.1 1.81.8

(w / o Bar and Chain)

1.8(w / o Bar and

Chain)

0.9(w/o Bar and

Chain)

2.2(w / o Blade)

2.2(w / o Blade)

5.2(w / Drum

assemblies)

Length (mm) 820 820 1460 1460 840 840 − 1870 1870 − 795 795 480 Drive shaft Diameter (mm) 6 6 6 6 6 6 − 6 6 − 6 6 6Main Pipe Diameter (mm) 24.0 24.0 24.0 24.0 24.0 24.0 − 24.0 24.0 − 24.0 24.0 24.0 Gear reduction ratio 1.29 1.29 6.14 6.14 6.14 6.14 6.14 1.06 1.06 1.06 1.36 1.36 40.0 Effective cutting length / Pitch (mm) − − 520 / 31 520 / 31 520 / 31 520 / 31 520 / 31 − − − − − −Guide Bar Length (inch) − − − − − − − 8, 10, 12 8, 10, 12 8, 10, 12 − − −Saw chain Pitch (inch) − − − − − − − 3 / 8 3 / 8 3 / 8 − − −Cutting Blade Length (mm) − − − − − − − − − − 197 197 −Max. sweeping width (mm) − − − − − − − − − − − − 575

Applicable Power Head M242SM2510 M230 M242S

M2510 M230 M242SM2510 M230 − M242S

M2510 M230 − M242S M230M230

M242SM2510

photo / M242S

photo / M230

photo / M2510

Multi-tool System

M230n Engine displacement : 22.5cm3

n Output : 0.80kW / 1.09psn Dry weight*1 : 3.9kg n Length*1 : 1020mm

M242S



M2510



SBA-P24Bar/Chain not included

SBA-TX24-1Cutting head not included

SBA-PS24

SBA-AH2422

SBA-AHS2422

SBA-LE24Blade not included

Blade Part No. 69601552632

ULTRA Light

*1: Unit without attachment

Positive CouplerThe Multi -tool's easy-to-use coupler provides a positive connection b e t we e n t h e p owe r head and attachments.

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

4342

Manual Sprayers

SP30BPEn Dry weight*1 : 5.2kgn Chemical tank capacity : 11.4Ln Maximum Pressure : 6.3kgf / cm2

SP45BPESn Dry weight*1 : 5.6kgn Chemical tank capacity : 17.0Ln Maximum Pressure : 6.3kgf / cm2

Sprayers

Pole Prunereasy to carry

Guide Bar Saw Chain

Model Gauge (in) Pitch (in) Length (cm) Parts NumberNumber of Drive

LinksOregon Type Part Number

P230SSBA-P24#65002ATT-P230

0.043 3 / 820 X120-000030 33 90SG X260-000000

25 X121-000090 39 90SG X221-00004030 X122-000300 44 90SG X222-000050

These bar and chain combinations are intended for Pole Pruners. Guide bar & chain-pole pruner & multi-tool models

SP20HPSn Dry weight*1 : 2.1kgn Chemical tank capacity : 7.6Ln Maximum Pressure : 3.2kgf / cm2

SP40BPSn Dry weight*1 : 4.8kgn Chemical tank capacity : 15.1Ln Maximum Pressure : 6.3kgf / cm2

Powered by Shindaiwa's legendary 22.5cc durable engine

Engine Sprayer

*1: Unit without spraying hose and nozzle

Easy-to-use coupler provides a positive connection between the power head and attachments.

ES726n Engine displacement : 22.5cm3

n Output : 0.60kW / 0.82ps n Dry weight*1 : 9.1kgn Chemical tank capacity : 26L

High pressure piston pump sprays mist farther and wider

Extra large chemical t ank ho lds up to 26 liters of liquid for longer operation time.

Bar/Chain not included

P230Sn Engine displacement : 22.5cm3

n Output : 0.80kW / 1.09ps n Dry weight*1 : 5.4kgn Over length Lenght with 10"bar assembly : 2805mm

*1: Without cutter attachment

Narrow kerf bar and 3/8 inch pitch low profile chain are standard.Choose 20, 25 or 30 cm bar.

ULTRA Light

Trimm

ersBrushcutters

Other ProductsBlow

ersChain Saw

sHedge Trim

mers

4544

Engine Cutters

Spreaders

Model Cutting wheel diameter Part Number Description

EC350 9 in (230 mm)M618-000040 for MetalM618-000050 for Concrete

EC7500W 12 in (305 mm) M618-000010 for ConcreteEC7600W 14 in (355 mm) M618-000000 for Concrete

EnGinE CuTTEr ABrASivE WHEELS

WATEr KiTComplete kit includes two water-feed nozzles, shut-off valve, quick-disconnect fitting, and all mounting hardware.

M061-000010 12.7mm (1/2 in.) and 16mm (5/8 in.) hoses

“WHEEL” KiTEasy-to-install kit supports the weight of EC7500W and EC7600W cut-off saws, making the saw easier to handle during flush-cutting.CST-EC7500 includes mounting hardware.


n Output : 1.60kW / 2.18ps n Dryweight*1 : 7.5kgn Applicable blade diameter : 9inch / 230inch

EC350

RS60n Dry weight : 10.2kgn Hopper capacity : 36.8L



RS76Sn Dry weight : 12.1kgn Hopper capacity : 36.8L

*1: Unit without specified cutting blade

Transmission isenclosed and sealed

Full 6-point anti-vibration system for reduced operator fatigue

One-step choke and fast-idle mechanism for easy hot and cold restarts

Heavy-duty, multi-ribbed V-belt for constant grip and reduced slippage

photo / EC7600W


n Output : 3.40kW / 4.62ps n Dryweight*1 : 10.2kgn Applicable blade diameter : 12inch / 305inch

EC7500W


n Output : 3.40kW / 4.62ps n Dryweight*1 : 10.6kgn Applicable blade diameter : 14 inch/ 355inch

EC7600W

Cutting blade is not included

2 types of cutting blades are included

Water Kit included

Sealed recoil starter for long service life

Replacement rope guide

46

The new Flash Hook Up system can greatly save your time. It takes less than one second!

FLASH HOOK UP

Accessories

Oil And Lubricants

Shindaiwa OneThis oil is specially formulated to meet ISO-L-EGD and JASO FC standards for use in all 2-cycle and C4 engines. Delivers low smoke, temperature protection, and fuel stabilization.

Shindaiwa highly recom-mends oil that meets ISO-L-EGD and JASO FC standards for use in all 2-cycle and C4 engines.

Gearcase LubricantHandy pump fits five-gallon and 20-liter pails to provide measured quantities of mixing oil with each pump stroke. Delivers 3.38 oz. (100 ml) per stroke.

99909-0010

Gearcase LubrIcantThe best solution for easy gearcase maintenance on all straight-shaft trimmers and brushcutters. Great for flex-ible lubrication. Complete with easy-to-understand in-structions.

13-57 0.8 oz. tube.13-58 10 oz. tube.

80767

80765

Safety GlassesThese stylish safety glasses feature tough impact- and abrasion-resistant lenses. Fully adjustable temples and arms.Thanks to single-piece lenses, these glasses are light weight.

80767 Clear lens.80766 Blue mirror lens.80765 Grey lens.

Protective equipment & Apparel

Face Protector82003 Designed and manufac-tured specifically for the com-mercial end-user.

Durable nylon visor, wire mesh face protector, and ear muffs.

Safety Helmet Set82002 Designed and manufactured specifically for the commercial end-user.

Durable nylon six-point fabric head harness helmet, wire mesh face protector, and ear muffs.

Ergonomic Harness

Part No.C062-000560

80766

Gathering feedback delivers Yamabiko quality and

trust from users

ANALYSISGathering analytical data delivers

Yamabiko quality and trust from users

Phase 1 Before designingPhase 2 During developmentPhase 3 After sales

YAMABIKO Quality

Trust from

USERS

Evolution of Yamabiko which ”ANALYSIS” supports

EngineerDaikiSHIBASAKI

We utilize computer simulations including strength analysis, which determines material strength. Vibration analysis and thermo-fluid analysis analyze flow of combustion in engines and blowing performance of blowers. We quantify performance and quality of all Yamabiko products using computers, analyzing and verifying them from various angles. We analyze not only products on the market, but also new models under development. Take the case of hooks breaking under certain conditions. What kind of new part shape can prevent the problem? If we change shapes or materials, what effects will those changes have on other portions of the product? In these cases, our analysis techniques are useful. When we develop a new model, we study the basis of the current model. What kind of improvements should be made to evolve the model into a lighter, stronger, and easier to use product? Analysis plays a role in deciding the direction of a product.

Analysis improves the quality of Yamabiko products and produces user trust.

In some cases, we are required to interpret invisible phenomena. For example, we cannot visually confirm efficiency of combustion, conduction of heat, and subtle distortion. A little change of a condition can totally change what the user feels. We provide feedback data to designers and utilize users’ opinions from the field for further analysis to maintain quality and improve reliability of products originated in Japan.We will increase areas where analysis can be applied in new product development. The establishment of this system will lead to reduced development timelines and costs, which will translate into product benefits for customers. We are committed to enhancing our skills so we can continue making new and innovative improvements.

47

Top Handle Saws Rear Handle Saws269TS 269TCS 320TS 305S 352S 352S 360 377 390SX 389S 452S 452GS 488

Configuration EU EU EU EU RUS AUS EU AUS, RUS Basic RUS, Korea EU EU, AUS EU, TUR RUS PRC, Basic EU EU, TUR RUSEngine displacement (cm3) 26.9 26.9 32.3 30.5 30.5 30.5 35.2 35.2 35.2 37.7 38.4 38.9 45.1 45.1 45.1 45.1 47.9 47.9Output (kW / ps) 0.86 / 1.17 0.86 / 1.17 1.36 / 1.85 1.10 / 1.50 1.10 / 1.50 1.10 / 1.50 1.42 / 1.93 1.40 / 1.90 1.40 / 1.90 1.65 / 2.24 1.90 / 2.58 1.70 / 2.31 2.26 / 3.07 2.26 / 3.07 2.26 / 3.07 2.26 / 3.07 2.26 / 3.07 2.20 / 2.99 Dry weight*1 (kg) 2.9 2.9 3.5 4.0 4.0 4.0 4.2 4.2 4.0 4.3 4.5 4.5 4.6 4.6 4.6 4.8 4.9 4.9Fuel tank capacity (L) 0.24 0.24 0.37 0.25 0.25 0.25 0.40 0.40 0.40 0.40 0.42 0.46 0.54 0.54 0.54 0.54 0.60 0.60 Fuel consumption at maximum engine power (kg / h) 0.55 0.55 0.76 0.59 0.75 0.56 0.94 0.94 − − TBD 1.06 1.09 1.09 1.09 1.09 1.05 1.05Chain oil tank capacity (L) 0.16 0.16 0.23 0.26 0.26 0.26 0.25 0.25 0.25 0.25 0.215 0.25 0.27 0.27 0.27 0.27 0.30 0.30 Priming pump ¡ ¡ − ¡ ¡ ¡ − − − − - − − − − − − −Ignition system CDI CDI CDI CDI CDI CDI CDI CDI TCI TCI CDI CDI CDI CDI CDI CDI CDI CDIStart assist system Soft start Soft start Soft start Soft start Soft start Soft start Soft start Soft start − − Soft start Soft start Soft start Soft start Soft start Soft start − −Chain brake Inertia Inertia Inertia Inertia Inertia Inertia Inertia Inertia Manual Manual Inertia Inertia Inertia Inertia Inertia Inertia Inertia InertiaChoke w / automatic fast idle release ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ − − ¡ ¡ ¡ ¡ ¡ ¡ − −Chain Tensioner Side Side Side Side Side Side Front Front Front Front Front Front Front Front Front Front Front FrontSaw chain pitch (inch) 3 / 8 1 / 4 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 0.325 0.325 0.325 0.325 0.325 0.325 0.325 0.325 Guide bar gauge (inch) 0.050 0.050 0.050 0.050 0.050 (0.043) 0.050 (0.043) 0.050 0.050 0.050 0.050 0.050 0.058 0.058 0.058 0.058 0.058 0.058 0.058

Applicable bar length (cm / inch) 25, 30 / 10, 12 25 / 10 30, 35

/ 12, 1430, 35

/ 12, 1430, 35

/ 12, 1430, 35

/ 12, 1435, 40

/ 14, 1635, 40

/ 14, 16 40 / 16 40 / 16 33, 38 / 13, 15

33, 38, 40 / 13, 15, 16

33, 38, 40, 45 / 13, 15, 16, 18 38 / 15 40, 45

/ 16, 1833, 38, 40, 45 / 13, 15, 16, 18

33, 38, 40, 45, 50 / 13, 15, 16, 18, 20

38, 45 / 16, 18

Rear Handle Saws488 488P 490 577 577P 598 600SX 757 757C

Configuration PRC Basic Basic EU AUS Basic Basic RUS EU RUS AUS, Basic BasicEngine displacement (cm3) 47.9 47.9 47.9 47.9 47.9 57.3 57.3 59.8 59.8 73.5 73.5 73.5Output (kW / ps) 2.20 / 2.99 2.20 / 2.99 2.20 / 2.99 2.28 / 3.10 2.28 / 3.10 2.60 / 3.54 2.60 / 3.54 3.00 / 4.08 TBD 4.06 / 5.52 4.06 / 5.52 4.06 / 5.52Dry weight*1 (kg) 4.9 4.9 5.2 4.8 4.8 5.8 6.1 6.1 TBD 6.8 6.8 6.6Fuel tank capacity (L) 0.60 0.60 0.60 0.60 0.60 0.77 0.77 0.64 0.64 0.77 0.77 0.77Fuel consumption at maximum engine power (kg / h) 1.05 1.05 − 1.07 1.07 − − 1.47 TBD − − −Chain oil tank capacity (L) 0.30 0.30 0.30 0.30 0.30 0.32 0.32 0.30 0.30 0.36 0.36 0.36Priming pump − − − − − − − − − − − −Ignition system CDI CDI CDI CDI CDI CDI CDI CDI CDI CDI CDI CDIStart assist system − − − − − − − Decomp Decomp − − −Chain brake Inertia Inertia Inertia Inertia Inertia Manual Manual Inertia Inertia Manual Manual ManualChoke w / automatic fast idle release − − − ¡ ¡ − − ¡ ¡ − − −Chain Tensioner Front Front Front Side Side Front Front Side Side Front Front FrontSaw chain pitch (inch) 0.325 0.325 0.325 0.325 0.325 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8Guide bar gauge (inch) 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058

Applicable bar length (cm / inch) 45, 50 / 18, 20

40, 45, 50 / 16, 18, 20

40, 45, 50 / 16, 18, 20

33, 38, 40, 45, 50 / 13, 15, 16, 18, 20

40, 45, 50 / 16, 18, 20

45, 50, 60 / 18, 20, 24

45, 50, 60 / 18, 20, 24 40 / 16 45,50,60

/18,20,24 50 / 20 45, 50, 60, 70 / 18,20, 24, 28

45, 50, 60, 70 / 18, 20, 24, 28

Specifications

Chain Saws

Chain Saws



Not all models are available in all markets throughout the world. Also, specifications may change without notice.

Curved Shaft Trimmers Trimmers BrushcuttersF220 F226S T220 T226S T230XR T242XS T260 T270 T310S T350 T410S C226S C230 C242S C260 C270

Configuration AUS RUS EU AUS EU AUS EU AUS AUS EU EU, AUS EU EU AUS RUS EU AUS AUSHandle type*1 L L L L L L L L L L L L U U U U U UEngine displacement (cm3) 21.1 21.1 21.2 21.1 21.2 22.5 23.9 24.1 27.2 28.9 33.6 41.5 21.2 22.5 22.5 23.9 24.1 27.2Output (kW / ps) 0.69 / 0.94 0.69 / 0.94 0.70 / 0.95 0.69 / 0.94 0.70 / 0.95 0.74 / 1.01 0.80 / 1.09 0.90 / 1.22 1.10 / 1.50 1.00 / 1.36 1.30 / 1.77 1.60 / 2.18 0.70 / 0.95 0.74 / 1.01 0.74 / 1.01 0.80 / 1.09 0.90 / 1.22 1.10 / 1.50 Dry weight*2 (kg) 4.2 4.3 4.2 4.1 4.8 4.6 5.1 5.4 5.6 6.1 7.0 8.1 4.9 4.9 4.9 5.1 5.5 6.2Fuel tank capacity (L) 0.53 0.53 0.4 0.53 0.4 0.54 0.62 0.6 0.67 0.75 0.9 0.7 0.4 0.54 0.54 0.62 0.6 0.67Fuel consumption at maximum engine power (L / h) 0.66 0.66 0.46 − 0.46 0.73 0.58 − 0.87 0.71 1.08 TBD 0.46 0.73 0.73 0.58 − 0.87Carburetor Type Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm DiaphragmStart assist system − − Soft Start − Soft Start − Soft Start − − Soft Start − Soft Start Soft Start − − Soft Start − −

Drive shaftType Flexible Flexible Flexible Solid Flexible Solid Solid Solid Solid Solid Solid Solid Flexible Solid Solid Solid Solid SolidDiameter (mm) 6 6 6 6 6 6 6 7 7 8 8 8 6.15 6 6 6 7 7

Main Pipe Diameter (mm) 22.2 22.2 25.0 24.0 25.0 24.0 24.0 24.0 26.0 26.0 26.0 28.0 25.0 24.0 24.0 24.0 24.0 26.0 Gear reduction ratio − − 1.0 1.29 1.36 1.29 1.36 1.36 1.36 1.4 1.24 1.33 1.36 1.29 1.29 1.36 1.36 1.36

StandardizedCutting Device

Type(Item Number)

SPEED-FEED 375

(X047-000622)

SPEED-FEED 375

(X047-000622)G137 100

(X047-000550)SPEED-FEED

375(X047-000632)

G138 500(X047-000560) −

SPEED-FEED 375

(X047-000632)− −

SPEED-FEED 450

(X047-000581)Z5

(78820-15000)DS-5 M10L

(X047-000220)3-cutter metal

blade(X405-000320)

−SPEED-FEED

375(X047-000632)

SPEED-FEED 375

(X047-000632)− −

Type(Item Number) − − − − − − − − − − − − − −

4-cutter metal blade

(X405-000330)− − −

Trimmers /Brushcutters

*1 : Handle type L : loop handle U : U shaped handle *2 : Without cutting attachment and shield

48 49

BrushcuttersC300 C310S C350 C35LA B450 B450 B450R B45LA B410S CL520 B530 CL590

Configuration RUS EU EU RUS AUS Basic EU RUSAUS, Basicw/o swivel

hanger

AUS, Basicw/ swivel

hangerBasic EU EU EU Basic TUR EU

Handle type*1 U U U U U U U U U U U U U U U UEngine displacement (cm3) 27.2 28.9 33.6 33.6 33.6 33.6 41.5 41.5 41.5 41.5 41.5 41.5 51.7 53.2 53.2 53.2 58.2Output (kW / ps) 1.00 / 1.36 1.00 / 1.36 1.30 / 1.77 1.37 / 1.86 1.37 / 1.86 1.34 / 1.82 1.60 / 2.18 1.70 / 2.31 1.70 / 2.31 1.70 / 2.31 1.69 / 2.30 1.60 / 2.18 1.80 / 2.45 1.90 / 2.58 2.30 / 3.13 1.90 / 2.58 2.40 / 3.26 Dry weight*2 (kg) 6.5 6.5 7.7 7.6 7.6 8.0 7.7 7.6 7.8 8.1 8.1 8.7 10.5 9.5 9.4 9.5 10.4Fuel tank capacity (L) 0.69 0.75 0.90 0.76 0.76 0.76 0.9 0.76 0.76 0.76 0.76 0.7 1.0 1.2 1.2 1.2 0.75Fuel consumption at maximum engine power (L / h) 0.87 0.71 1.08 1.14 1.14 1.14 1.39 1.26 1.36 1.26 1.26 TBD 1.15 ? ? ? 1.77Carburetor Type Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm DiaphragmStart assist system − Soft Start − − − − − − − − − Soft Start − − − − −

Drive shaftType Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid SolidDiameter (mm) 7 8 8 8 8 8 10 10 10 10 10 8 10 10 10 10 10

Main Pipe Diameter (mm) 26.0 26.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 35.0 28.0 28.0 28.0 35.0 Gear reduction ratio 1.36 1.4 1.36 1.36 1.36 1.36 1.36 1.36 1.36 1.36 1.36 1.33 1.4 1.36 1.36 1.36 1.4


Type(Item Number)

SPEED-FEED 450

(X047-000581)

SPEED-FEED 450

(X047-000581)

SPEED-FEED 450

(X047-000581)

SPEED-FEED 450

(X047-000581)− −

SPEED-FEED 450

(X047-000581)− − −


(X405-000151)− U6

(78820-14000) − − −

Type(Item Number)


(X405-000350)− −


(X405-000350)− −


(X405-000350)− − − − − − − − −

Backpack brushcutters Clearing saw Trimmers (C4 Engine) Brushcutters (C4 Engine)BP35 BP40LA BP420S BP520S BP530 RCL590 T2510X T3410 C2510 C3410

Configuration Basic Basic EU EU EU TUR EU EU AUS EU EU EUHandle type*1 L L L L L L U L L L U UEngine displacement (cm3) 33.6 33.6 42.7 51.7 53.2 53.2 58.2 24.5 24.5 34.0 24.5 34.0 Output (kW / ps) 1.24 / 1.69 1.50 / 2.04 1.70 / 2.31 1.90 / 2.58 1.60 / 2.18 1.90 / 2.58 2.40 / 3.26 0.80 / 1.09 0.80 / 1.09 1.10 / 1.50 0.80 / 1.09 1.10 / 1.50 Dry weight*2 (kg) 9.7 8.9 11.5 11.6 11.8 12.8 10.2 5.2 5.2 6.0 5.3 6.4Fuel tank capacity (L) 1.2 1.2 1.2 1.2 1.2 1.2 0.75 0.59 0.59 0.75 0.59 0.75Fuel consumption at maximum engine power (L / h) 1.14 0.95 1.20 1.15 1.31 − 1.77 0.54 0.54 0.65 0.54 0.65Carburetor Type Float Float Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm DiaphragmStart assist system − − Soft Start Soft Start − − − Decomp Decomp Decomp Decomp Decomp

Drive shaftType Flexible Flexible Solid Solid Flexible Flexible Solid Solid Solid Solid Solid SolidDiameter (mm) 8 8 8 8 8.2 8 10 6 6 7 6 7

Main Pipe Diameter (mm) 26.0 26.0 28.0 28.0 26.0 26.0 35.0 24.0 24.0 26.0 24.0 26.0 Gear reduction ratio 1.24 1.24 1.33 1.33 1.24 1.24 1.4 1.29 1.29 1.36 1.29 1.36


Type(Item Number)

− −3-cutter metal

blade(X405-000151)


(X405-000151)− −

Clearing saw blade

(695001-51530)

SPEED-FEED 375

(X047-000632)−

SPEED-FEED 450

(X047-000581)

SPEED-FEED 375

(X047-000632)

SPEED-FEED 450

(X047-000581)

Type(Item Number)

− − − − − − − − − − − −

Specifications






Double-sided Hedge Trimmers Single-sided Hedge Trimmers Shafted Hedge Trimmers DH220 22DH DH2200ST DH230 DH230-24 DH230-30 DH2510T-24 DH2510T-30 HT230 HT230-30 HT230-40 HT2510-30 HT2510-40 AH230S AH242S AHS242S AH2510 AHS2510

Configuration EU Basic EU, AUS EU PRC Basic EU, AUS EU PRC Basic EU Basic EU EU EU EUEngine displacement (cm3) 21.1 21.1 21.1 22.5 22.5 22.5 24.5 22.5 22.5 22.5 24.5 22.5 23.9 23.9 24.5 24.5Output (kW / ps) 0.60 / 0.82 0.68 / 0.92 0.59 / 0.80 0.75 / 1.02 0.75 / 1.02 0.80 / 1.09 0.76 / 1.03 0.75 / 1.02 0.75 / 1.02 0.80 / 1.09 0.76 / 1.03 0.80 / 1.09 0.80 / 1.09 0.80 / 1.09 0.80 / 1.09 0.80 / 1.09 Dry weight (kg) 4.7 4.5 4.6 5.7 5.7 5.5 5.8 6.29 6.44 5.6 5.6 5.5 6.0 5.79 6.14 5.9 6.2 6.1 6.3 6.2Overall length (mm) − − − − − − − − − − − 2355 2365 1660 2365 1660Fuel tank capacity (L) 0.4 0.4 0.4 0.6 0.6 0.6 0.55 0.6 0.6 0.7 0.55 0.55 0.62 0.62 0.6 0.59Fuel consumption at maximum engine power (L / h) 0.62 0.53 0.55 0.64 0.64 0.67 0.53 0.64 0.64 0.67 0.67 0.53 0.69 0.54 0.54 0.56 0.56Start assist system − − Soft start − − − Decomp − − − Decomp Soft Start Soft Start Soft Start Decomp DecompRotatable handle − − ¡ − − − ¡ − − − − − − − − −Anti-vibration system − − ¡ − − − ¡ − − − − ¡ ¡ ¡ ¡ ¡

Gear reduction ratio 6.14 6.14 4.60 4.89 4.89 4.89 4.89 3.73 4.89 4.89 4.89 4.89 3.73 6.14 6.14 6.14 6.14 6.14

Blade

Cutter Type Double Double Double Double Double Double Double Single Single Single Single Double Double Double Double DoubleEffective cutting length (mm) 428 521 484 519 519 519 659 519 658 693 693 693 1008 693 1008 520 520 520 520 520Pitch (mm) 31 31 35 35 35 35 35 35 35 35 35 35 35 31 31 31 31 31

Cutter Clearance Adjustable Adjustable Non-Adjustable Adjustable Adjustable Adjustable Adjustable Non-Adjustable Adjustable Adjustable Adjustable Adjustable Non-Adjustable　　 Adjustable Adjustable Adjustable Adjustable Adjustable

Hedge Trimmers

50 51

Handheld Blowers Handheld Blowers(C4 Engine) Backpack BlowersBackpack Blowers(C4 Engine)

EB220S EB240S EB2510 EB3410 EB803 EB803RT EB8520RTConfiguration EU AUS EU EU EU, AUS AUS, Basic AUS, Basic EUEngine displacement (cm3) 21.1 21.1 24.0 24.5 34.0 79.2 79.2 79.7Output (kW / ps) TBD 0.60 / 0.82 0.70 / 0.95 0.86 / 1.17 1.10 / 1.50 3.14 / 4.27 3.14 / 4.27 3.33 / 4.53

Dry weight*1 (kg) TBD 3.36 4.2 5.25 5.6 11.4 11.4 12.5(Ø74 pipe)12.6(Ø65 pipe)

Fuel tank capacity (L) 0.6 0.6 0.5 0.6 0.6 2.02 2.02 2.02Fuel consumption at maximum engine power (L / h) TBD 0.59 0.64 0.58 0.67 1.67 1.67 1.63

Max air volume (m3 / h) at actual usage point TBD 600 522 426 474(Round pipe)486(Flat pipe) 1181(Ø74 pipe) 1181(Ø74 pipe) 1260(Ø74 pipe)

1140(Ø65 pipe)

Max air speed (m / sec) TBD 59 74.2 79 87(Round pipe)86(Flat pipe) 82(Ø74 pipe) 82(Ø74 pipe) 85(Ø74 pipe)

95(Ø65 pipe)Start Assist System Soft Start Soft Start − Decomp Decomp − − DecompThrottle Lock ¡ ¡ − ¡ ¡ − ¡ ¡

Nozzle typeRound

Straight + Flat

Round Straight +

FlatRound

StraightRound

StraightRound

Straight + Flat

Round Straight(Ø65, 74)



Specifications

Blowers

*1 : Unit with blower pipe

*4 : Unit without spraying hose and nozzle

M230 M242S M2510Configuration AUS EU EUEngine displacement (cm3) 22.5 23.9 24.5Output (kW / ps) 0.80 / 1.09 0.80 / 1.09 0.80 / 1.09 Dry weight*2 (kg) 3.9 4.5 4.6Length*1 (mm) 1020 1040 1040 Fuel tank capacity (L) 0.55 0.62 0.60Fuel consumption at maximum engine power (L / h) 0.73 0.53 0.54Start Assist System − Soft Start Decomp

ES726Configuration AUS, BasicEngine displacement (cm3) 22.5Output (kW / ps) 0.60 / 0.82 Dry weight*4 (kg) 9.1Fuel tank capacity (L) 0.60 Fuel consumption at maximum engine power (L / h) 0.48Chemical tank capacity (L) 26Carburetor Type diaphragm

Pump

Type PistonMaximum Pressure (kgf / cm2) 25Max. discharge (L / min) 7.0

Multi-ToolPower Heads

Engine Sprayer

*2 : Unit without attachment


P230SConfiguration BasicEngine displacement (cm3) 22.5Output (kW / ps) 0.80 / 1.09 Dry weight*3 (kg) 5.4Overall length (mm) Length with 10"bar assembly 2805Fuel tank capacity (L) 0.55Fuel consumption at maximum engine power (L / h) 0.73Chain oil tank (L) 0.11Start assist system Soft StartGuide bar length (inch) 8, 10, 12Guide bar gauge (inch) 0.043Saw chain pitch (inch) 3 / 8

Pole Pruner

*3 : Unit without attachment

*5 : Unit without spraying hose and nozzle

SP20HPS SP30BPE SP40BPS SP45BPSConfiguration AUS, Basic AUS, Basic AUS, Basic AUS, BasicDry weight*5 (kg) 2.1 5.2 4.8 5.6Chemical tank capacity (L) 7.6 11.4 15.1 17.0 Pump type Piston Piston Piston PistonMaximum Pressure (kgf / cm2) 3.2 6.3 6.3 6.3

Manual Sprayers

RS41 RS60 RS76 RS76SConfiguration EU, AUS, Basic EU, AUS, Basic EU, AUS, Basic EU, AUS, BasicDry weight (kg) 6.2 10.2 12.1 12.1Hopper capacity (L) 21.2 36.8 36.8 36.8Handle Length (cm) 78.7 78.7 91.4 78.7Tires (mm/ inch) 254 / 10 305 / 12 305 / 12 305 / 12

Spreaders

EC350 EC7500W EC7600WConfiguration Basic EU EU, AUSEngine displacement (cm3) 35.5 73.5 73.5Output (kW / ps) 1.60 / 2.18 3.40 / 4.62 3.40 / 4.62 Dry weight*6 (kg) 7.5 10.2 10.6Fuel tank capacity (L) 0.65 0.8 0.8Fuel consumption at maximum engine power (L / h) − 2.45 2.45Ignition system TCI CDI CDIStart assist system − Decomp DecompApplicable blade diameter (inch / mm) 9 / 230 12 / 305 14 / 355Installable size of blade inner diameter (mm) 22 20, 22, 25.4 20, 22, 25.4

Engine Cutters

*5 : Unit without specified cutting blade

52 53

54 55

1955Shindaiwa's first chain saw "Hurricane"

1963Electric chain saw A33 generated nationwide sales

1973A105 electric chain saw for the "Do It Yourself" market.

1978Electric chain saw A100, introduced to USA market.

1985EB45 creates blower market

1994PB270E World's first power broom

1999AH230 long reach trimmer equipped with easy head angle adjustment system

1999E1039S Evolutional chain saw with vertical mount engine layout

1962Electric chain saw A88 moves Shindaiwa into the construction equipment industry.

1965Thousands of deck saws are exported to Peru

1977E305AV, Shindaiwa's first engine chain saw

1979The historical successful model, A 104P, equipped with automatic filing system.

1993ECD488, the first engine cutter with dust correction system

1995MCD260 wins the "Good Design Award"

1999AH230 wins the "OEM-mie award"

2002T2500 equipped with the first 4-cycle engine developed by Shindaiwa

Product History

Today’s Technology for Tomorrow’s Nature

4Significant

Beliefs Support people and companies committed to sustaining nature

and the environment.

Provide a sense of fulfillment for all persons affiliated with

Yamabiko.

Offer the best products and service in the world.

Lead the industry through creation of new markets and

customers, ultimately resulting in growth for tomorrow.

YAMABIKO Corporation’s corporate mission is to “create the bridge that bonds people and nature with the future”. The company’s essence, that which expresses the key attributes which describe YAMABIKO as a company, is stated as:

YAMABIKO’S essence is composed of four Significant Beliefs.

We, the Yamabiko Corporation,would like to be known as a company

that grows its business by striving to sustaina healthy environment today and for the future,

for people all over the world

Yamabiko Europe

Echo machinery (shenzhen) Co.,Ltd.

Echo taiwan Co.,Ltd.

Yamabiko corporation

Crary industry, Inc.

Echo incorporated

56 57

YAMABIKO Corporation sources its products from three factories in Japan and two factories overseas . Al l the company’s fac tor ie s car r y the same quality standards and systems needed to manufacture the highest quality products in a consistent manner. In addition, YAMABIKO Corporation is one of the few

manufacturers in its industry that produces most key components in house or through affiliated companies, extending greater control over product integrity and quality. Its factories operate with an environmental conscience and strive to continually produce environment-friendly products for global use.

We keep the world’s landscape healthy and green with the latest environment-friendly technology

YAMABIKO CORPORATION Head office

MORIOKA PLANT AGRICULTURAL MACHINERY DIVISION

YOKOSUKA PLANT PRODUCTION ENGENEERING DEPT.

HIROSHIMA PLANT INDUSTRIAL MACHINERY DIVISION

ECHO INCORPORATED (USA) ECHO MACHINERY CO., Ltd. (PRC)

YAMABIKO Corporation’s Global OperationFor over half a century, YAMABIKO Corporation has been serving the professional landscaping market. Advanced engineering along with a global manufacturing footprint have helped position the company as a leader both now and into the future.Quality product is only part of the equation. YAMABIKO Corporation serves the global outdoor power equipment market through thousands of Shindaiwa dealers in more than 80 countries. These well-trained dealers provide unparalleled customer support with the highest level of satisfaction. Millions of Shindaiwa units are in use today tending agricultural fields, forests, gardens and homes.

2013 Master Product Catalo ueg 2013 Master Product Catalogue · 2013 Master Product Catalogue. 1...

Documents

Transcript of 2013 Master Product Catalo ueg 2013 Master Product Catalogue · 2013 Master Product Catalogue. 1...