2013 enamelite dr masek ti implant coated case 030113

29
Dentistry By Design, Inc © Dr Rich Masek Ceramic Spray AEROpaque For Titanium Crowns & Bridges Implant Abutments and Bars

Transcript of 2013 enamelite dr masek ti implant coated case 030113

Dentistry By Design, Inc

© Dr Rich Masek

Ceramic Spray AEROpaque

For

Titanium Crowns & Bridges

Implant Abutments

and Bars

Ceramic Spray AEROpaque

For

Titanium Crowns & Bridges

Implant Abutments

and Bars

Dentistry By Design, Inc

© Dr Rich Masek

Enamelite LLCEnamelite LLC

enamelitellc.com

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

•Sandblast (120

um)

•Steam Clean

•Air Oxidize

Dentistry By Design, Inc

© Dr Rich Masek

Ti Bonder and Opaque Application Technique

Ti Bonder and Opaque Application Technique

Always use a analog holder through all steps to apply ceramic.

Prepare titanium surface to receive ceramic use a Clean Crosscut carbide bur.

Sandblast surface with minimum 120-150 micron aluminous oxide at a 45° degree angle with 20 to 30 pounds of air pressure.

Steam clean the restorations and let rest for minimum of 5-7 minutes to allow for natural oxide growth.

Using the analog holder to spray very light coat of Ti Bonder in front of suction device. Fire according to instructions. Properly applied Ti bonder will appear with a sheen and totally black color when applied properly.

Apply the opaque using same technique as bonder, two (2) coats , fired separately.

Glaze is the last application to make tissue are ideal for complimenting the tissue and etch the upper portion for optimal bonding to restoration.

Dentistry By Design, Inc

© Dr Rich MasekApply Bonder Coat & Fire

Dentistry By Design, Inc

© Dr Rich MasekAnalog Holder

Dentistry By Design, Inc

© Dr Rich Masek

Micro Thin Ceramic Coating of Ti Abutment

Micro Thin Ceramic Coating of Ti Abutment

Pre Coating ThicknessPost Coating

Thickness

Dentistry By Design, Inc

© Dr Rich Masek

Ideal Ti Bonder Coating for Optimal Bonding

Ideal Ti Bonder Coating for Optimal Bonding

Dentistry By Design, Inc

© Dr Rich Masek

Enamelite Titanium Spray Bonder and Opaque

Enamelite Titanium Spray Bonder and Opaque

Ti Bonder Sprayed Coping Ti Sprayed Opaque

Dentistry By Design, Inc

© Dr Rich Masek

AEROpaque Titanium Denture BarAEROpaque Titanium Denture Bar

Uncoated Ti Bar AEROpaqued Ti Bar

Dentistry By Design, Inc

© Dr Rich Masek

Importance Of Spray GlazeImportance Of Spray Glaze

AUFGESPRÜHT AUFGEPINSELT

Dentistry By Design, Inc

© Dr Rich MasekApply Opaquer, Tints &

Glaze

Dentistry By Design, Inc

© Dr Rich MasekOpaqued Abutment

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich MasekEtch & Silanate

Abutment

Dentistry By Design, Inc

© Dr Rich MasekInsert Abutment

Dentistry By Design, Inc

© Dr Rich MasekTry In VITA Mark II

1M1 Crown

Dentistry By Design, Inc

© Dr Rich MasekCharacterize & Glaze

With VITA Akzent

Dentistry By Design, Inc

© Dr Rich MasekCement With Variolink

Veneer

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek

Dentistry By Design, Inc

© Dr Rich Masek