2013 Dts Catalog PDF

5/26/2018 2013 Dts Catalog PDF

1/174

2013 Edition


2/174

Cover by DHL Photographix


3/174

Table of Contents - I

www.oceaneering.com/DTS

Services & Locations .........................................1Services ................................................................................................2

Oceaneering International, Inc. .........................................................2

Deepwater Technical Solutions (DTS) ..............................................3

Subsea Projects ................................................................................4

Remotely Operated Vehicles (ROVs) ................................................5

Subsea Products ...............................................................................6

Asset Integrity ....................................................................................7

Locations ..............................................................................................8

Houston, Texas - USA .......................................................................8Morgan City, Louisiana - USA ...........................................................8

Angola - Luanda ................................................................................8

Australia - Perth .................................................................................9

Brazil - Macae ....................................................................................9

Canada - Mount Pearl, NL .................................................................9

Ghana - Takoradi .............................................................................10

India - Kakinada ...............................................................................10

Nigeria - Port Harcourt ....................................................................10

Norway - Stavanger .........................................................................11

Southeast Asia - Singapore.............................................................11

Scotland - Aberdeen, UK.................................................................11

Table of Contents


4/174

II - Table of Contents

ROV Tooling ....................................................... 13Cleaning Tools ...................................................................................16

Connector Cleaner ..........................................................................16

Multi-Purpose Cleaning Tool (MCT)................................................17

Mooring Line Cleaning Tool .............................................................18

Cutting Tools ......................................................................................19

Hard Line Cutter ..............................................................................19

Intervention Tools .............................................................................20

Alignment Frame .............................................................................20

AX/VX Gasket Tool .........................................................................22

Gasket Removal Tool (GRT) ...........................................................24

Hydraulic Power Unit (HPU) ............................................................25

Impact Wrench.................................................................................26

Reservoir - 9 Gallon .........................................................................27

ROV Spring Release Shackle .........................................................28

TA Cap .............................................................................................29

Winch (Subsea ROV) ......................................................................30Cameras / Lighting / Displays ..........................................................31

Color LED Camera ..........................................................................31

Lighting System - Mid Water (4000W) ............................................32

Single Work Light (4000W) .............................................................33

Subsea Intelligent Display (SID) ......................................................34

Linear Valve Override Tools (LVOT) ................................................36

J-Lock Tool ......................................................................................36

Linear Valve Override Tool (LVOT) .................................................37

Collet Linear Override Tool (CLOT) .................................................38

Simplied Lockout Tool (SLOT).......................................................39

Tree Crack Open Tool (TCOT) ........................................................40

Measurement Tools ...........................................................................41

Caliper Tool ......................................................................................41

Chain Caliper Tool ...........................................................................42

Data Logger (Subsea) .....................................................................44Inclinometer .....................................................................................45

Inclinometer (Digital) ........................................................................46

Intelligent Pressure Transducer .......................................................48

pH Meter (Subsea)...........................................................................49


5/174

Table of Contents - III


Pumps .................................................................................................50

Duplex Pump ...................................................................................50

High-Flow Axial Piston Intervention (HAPI) Pump..........................52Marston Bentley (MB) Pump ...........................................................53

Skids ....................................................................................................54

AHPU Intervention Skid ...................................................................54

Fluid Injection Skid ..........................................................................56

Injection Skid - 4,000 m ...................................................................58

Methanol Injection Skid ...................................................................60

Stabs / EQD / Manifolds / Valves .....................................................62Hot Stabs & Manifolds .....................................................................62

Hot Stabs (2 & 4 Inch) .....................................................................64

Gauge Pack Stab ............................................................................65

Quad Zero Leak Stab ......................................................................66

Emergency Disconnect Hydraulic Hot Stab ....................................67

Failsafe Emergency Quick Disconnect (EQD) ...............................68

Test Manifold ...................................................................................69

Paddle Valve Assembly ...................................................................70Valve Pack (10 Station) ....................................................................71

Valve Pack (5 Station) .....................................................................72

Torque Tools .......................................................................................74

Torque Tool Class 1-4 .....................................................................74

Torque Tool Class 5 .........................................................................76

Torque Tool Gear Adapter ...............................................................77

Flying Lead Orientation Tool (FLOT) ...............................................78Buckets (ISO) ...................................................................................80

Manipulator Tool ..............................................................................81

Pneumatic Torque Tool ....................................................................82

Torque Test Jig (Subsea) .................................................................84

Tooling Control Unit (TCU) ..............................................................85


6/174

IV - Table of Contents

Engineered Solutions .......................................87Custom Solutions ..............................................................................88

Max 8/14 Metrology Tools ...............................................................88

Override Tools .................................................................................89

Riser Disconnect Tool .....................................................................90

Tree Release Tool (TRT) .................................................................91

Pipeline Repair Tools ........................................................................92

FBE & Weldseam Removal Tool .....................................................92

Mechanical Pipe Lift Frames (PLF) .................................................94

Pipe End Prep Tool ..........................................................................96Pipe Recovery Clamp ......................................................................98

Pipe Plugs ...........................................................................................99

Flowline Plug ...................................................................................99

Internal Pipe Plug ..........................................................................100

Max 14 Jumper Plug ......................................................................101

Vibration Inhibitors .........................................................................102

Anti-Vibration Clamp......................................................................102Fairing Installation Tool (FIT) .........................................................103

Pin Pile ...........................................................................................104

Strake Installation Tool (SIT) .........................................................105

Tooling Deployment Frame (TDF) .................................................106

Flow Assurance ............................................... 109

Flowline Remediation System (FRS) ............................................ 110Hydrate Remediation Skid (HRS) .................................................. 111

Pressure Annulus Relief (PAR) Tool ............................................. 112

Subsea Hydraulic Power Unit (SHPU) .......................................... 114

Subsea Reservoir ..........................................................................115

Well Stimulation Tool (WST) ........................................................116

BOP Intervention - Table of Contents ........... 119BOP Intervention Skid & Topside Test Unit ..................................120

High Flow BOP Intervention Panels ..............................................121

Auxiliary Accumulator System (Six Shooter) ...............................122

Subsea Accumulator Module (SAM Unit) .....................................123


7/174

Table of Contents - V


Decommissioning & Dredging ...................... 125

Decommissioning ...........................................................................126Anvil Cutter ....................................................................................126

Chopsaw ........................................................................................128

External Cutting Tool (ECT) ..........................................................130

Internal Cutting Tool (ICT) .............................................................132

Internal Multi-String Cutting Tool (IMCT) ......................................133

Pipe Grapple Tool ..........................................................................134

ROV Diamond Wire Saw ...............................................................135

Sectioning (Guillotine Saws & Drilling Machines) .........................136Subsea Wellhead Removal Tool (Wellhead Picker) .....................138

Super Grinder ................................................................................139

Dredging ...........................................................................................140

Diver Dredge ..................................................................................140

Drill Cuttings Remediation System................................................141

Pile Dredge ....................................................................................142

ROV Dredge ..................................................................................143Subsea Dredge ..............................................................................144

Subsea Jack-Hammer ...................................................................145

Index & Acronyms........................................... 147Index ..............................................................................................147

Acronyms .......................................................................................151


8/174

VI - Table of Contents

For Custom & Standard Tools

[email protected]

For Emergency Response

+1 (985) 329 3900



9/174

Services &

Locations

Services&

Locations


10/174

Services & Locations


11/174

Services & Locations - Table of Contents - 1


Services ...............................................................2Oceaneering International, Inc. .............................................................2

Deepwater Technical Solutions (DTS) ...................................................3Subsea Projects .....................................................................................4

Remotely Operated Vehicles (ROVs) ....................................................5

Subsea Products....................................................................................6

Asset Integrity ........................................................................................7

Locations .............................................................8

Houston, Texas - USA ...........................................................................8Morgan City, Louisiana - USA ...............................................................8

Angola - Luanda .....................................................................................8

Australia - Perth .....................................................................................9

Brazil - Macae ........................................................................................9

Canada - Mount Pearl, NL .....................................................................9

Ghana - Takoradi .................................................................................10

India - Kakinada ...................................................................................10

Nigeria - Port Harcourt.........................................................................10

Norway - Stavanger .............................................................................11

South East Asia - Singapore ...............................................................11

Scotland - Aberdeen, UK .....................................................................11

Services & Locations


12/174

ceaneering International, Inc.

Oceaneering is a global oileld

provider of engineered services

and products, primarily to theoffshore oil and gas industry,

with a focus on deepwaterapplications. Through the use of

its applied technology expertise,

Oceaneering also servesthe defense and aerospace

industries.

Divisions of Oceaneering: Remotely Operated Vehicles

(ROV)

Subsea Products Subsea Projects

Asset Integrity

Advanced Technologies

2 - Services & Locations

Oceaneering International, Inc.


13/174

Deepwater Technical Solutions

(DTS), solves subsea

challenges for the Oil & Gasindustry globally. Working

with Oceaneerings ROVsand vessels, and vessels

of opportunity, DTS is able

to provide a broad range ofservices and engineered

products on a fast response or

long lead basis.

DTS Products & Services: Engineered ROV Intervention

Tooling Rental Tooling Packages

Fast-Response Hardware and

Solutions Manage Customer Owned

Tooling (Tool Pool) Project Management and

Engineering

Flow Assurance

Decommissioning Dredging

BOP Intervention

Services & Locations - 3


Deepwater TechnicalSolutions (DTS)


14/174

Oceaneering Subsea Projectsperforms subsea oileld hardware

installation and inspection,maintenance, and repair services.

Multi-Service Vessels (MSVs) Ocean Alliance

Ocean Intervention

Ocean InterventionII Ocean InterventionIII

Olympic Intervention IV

Diving Ocean Inspector

Ocean Patriot Ocean Project

Ocean Quest

M7 SAT System

Field OperationsCommunications & VideoServices Live streaming video

Installation & IMR Services ROV & Diving Support Flowline Installation

Umbilical Installation /Connection Pre-lay & Post-Lay Mats

Well Abandonment / Wireline

Services Hydrate Remediation

Diving Services Subsea Pumping

Inspection Maintenance

Platform Jacket Repair Pipeline Work


Subsea Projects


15/174

Oceaneering is the worlds

largest Work Class ROV

manufacturer and theleading provider of ROVs

to the oil and gas industry.Oceaneering operates about

300 Work Class ROV systems

and employs nearly 2,500ROV offshore personnel

worldwide.

ROV Systems MagnumPlus

MillenniumPlus

Maxximum

Spectrum

Sea Maxx Satellite

ROV Technologies

3D High Denition Videos ROV Training

ROV Simulations



Remotely Operated

Vehicles (ROVs)


16/174

Oceaneering Subsea Products

manufactures built-to-order

specialty subsea oileldproducts. These encompass

production control umbilicals,subsea hardware, and

installation and workover

control systems (IWOCS).

Umbilical Solutions

Subsea Hardware Installation Workover &

Control Systems (IWOCS)

GraylocProducts Rotator Valves

BOP Control Systems

Pipeline Connection & RepairSystems (PCRS)


Subsea Products


17/174

Oceaneering Asset Integrity isone of the largest providers of

asset integritymanagement, corrosion

management, inspection,and non-destructive testing

services principally to the oil

and gas, power generation,and petrochemical industries.

These services are performed

on facilities onshore andoffshore, both topside

and subsea.

Asset Integrity Services: Conductor Stabilization

Solution (CSS) Crane & Lifting Certication

Drilling Rigs & Equipment Inspection & IntegrityManagement

Maintenance Management

Materials Testing Non-Destructive Testing (NDT)

Pipeline Inspection

Pipeline Inspection (In-Service) Rope Access

Subsea Inspection

Vendor Inspection Services


www.oceaneering.com/DTSAsset Integrity


18/174


DTS Worldwide Locations

Houston, Texas - USA

DTS Headquarters

11915 FM 529

Houston, Texas 77041

Phone: +1 (832) 467 7600

Engineering, Rentals &

Fabrication

Morgan City, Louisiana - USA

5004 Railroad Ave.

Morgan City, LA 70380

Phone: +1 (985) 329 3900


Fabrication

Angola - Luanda

Rua Kima Kyenda 309

Boavista Luanda

Base da Sonils, LDA

Republica De Angola, West

Africa

Phone: +244 912 449 406

Rentals


19/174



Australia - Perth

Oceaneering Australia Pty. Ltd.

16 Redemptora Road

Henderson W.A. 6166

Phone: +(61-8) 9499 2500


Fabrication

Brazil - Macae

Marine Production Systems do

Brazil Ltda.

Rua Lady Esteves da

Conceio, 1020 - NovoCavaleiros

Maca, RJ 27933-240 - Brasil

[email protected]

Phone: + 55 (22) 2757 9848

Rentals

Canada - Mount Pearl, NL

Oceaneering Canada Limited

23 Dundee Avenue

Mount Pearl, Newfoundland,

A1N4R6

Canada

Phone: +1 (709) 570 7072

Rentals



20/174



Ghana - Takoradi

Unit 8, Takoradi Oileld Centre

Cape Coast Road

Takoradi

Ghana

Phone: +233 (0) 3321 39051

Rentals

India - Kakinada

Oceaneering International

GmbH

Plot 12 & 13, APIIC,

Vakalpudi, Thammavaram Post,Opp. RIL Yard,District (E.G.),

Kakinada - 533003

India

Phone: +65 65011138

Mobile: +65 92305080

Rentals

Nigeria - Port Harcourt

DTS Nigeria Port Harcourt

28B Trans Amadi Road

Port Harcourt

Nigeria, West Africa

phbasetooling@oceaneering.

comPhone: +234 (0) 8446 4556

Rentals


21/174


www.oceaneering.com/DTSDTS Worldwide Locations

Norway - Stavanger

Oceaneering AS

Bygg 14

Jttvgen

4020 Stavanger

Norway

Phone: +47 51 82 51 00


Fabrication

Southeast Asia - Singapore

1 Kwong Min Road

Singapore 628704

Phone: +65 65011138

Mobile: +65 92305080

Rentals

Scotland - Aberdeen, UK

Oceaneering Holland House

Pitmedden Road

Dyce

Aberdeen AB210DP

Scotland

Phone: +44 1224 758500


Fabrication


22/174


For Custom & Standard Tools

[email protected]

For Emergency Response

+1 (985) 329 3900



23/174

ROVTooling

ROV

Tooling


24/174

ROV Tooling


25/174

ROV Tooling - Table of Contents - 13


ROV Tooling

Cleaning Tools ................................................... 16Connector Cleaner ..........................................................................16

Multi-Purpose Cleaning Tool (MCT)................................................17Mooring Line Cleaning Tool .............................................................18

Cutting Tools ..................................................... 19Hard Line Cutter ..............................................................................19

Intervention Tools ............................................20Alignment Frame .............................................................................20

AX/VX Gasket Tool .........................................................................22

Gasket Removal Tool (GRT) ...........................................................24

Hydraulic Power Unit (HPU) ............................................................25

Impact Wrench.................................................................................26

Reservoir - 9 Gallon .........................................................................27

ROV Spring Release Shackle .........................................................28

TA Cap .............................................................................................29

Winch (Subsea ROV) ......................................................................30

Cameras / Lighting / Displays .......................... 31Color LED Camera ..........................................................................31

Lighting System - Mid Water (4000W) ............................................32

Single Work Light (4000W) .............................................................33

Subsea Intelligent Display (SID) ......................................................34

Linear Valve Override Tools (LVOT) ................ 36J-Lock Tool ......................................................................................36

Linear Valve Override Tool (LVOT) .................................................37

Collet Linear Override Tool (CLOT) .................................................38

Simplied Lockout Tool (SLOT).......................................................39

Tree Crack Open Tool (TCOT) ........................................................40


26/174

14 - ROV Tooling - Table of Contents

Measurement Tools .......................................... 41Caliper Tool ......................................................................................41

Chain Caliper Tool ...........................................................................42Data Logger (Subsea) .....................................................................44

Inclinometer .....................................................................................45

Inclinometer (Digital) ........................................................................46

Intelligent Pressure Transducer .......................................................48

pH Meter (Subsea)...........................................................................49

Pumps ................................................................50Duplex Pump ...................................................................................50High-Flow Axial Piston Intervention (HAPI) Pump..........................52

Marston Bentley (MB) Pump ...........................................................53

Skids ...................................................................54AHPU Intervention Skid...................................................................54

Fluid Injection Skid ..........................................................................56

Injection Skid - 4,000 m ...................................................................58Methanol Injection Skid ...................................................................60

Stabs / EQD / Manifolds / Valves .....................62Hot Stabs & Manifolds .....................................................................62

Hot Stabs (2 & 4 Inch) .....................................................................64

Gauge Pack Stab ............................................................................65

Quad Zero Leak Stab ......................................................................66

Emergency Disconnect Hydraulic Hot Stab ....................................67

Failsafe Emergency Quick Disconnect (EQD) ...............................68

Test Manifold ...................................................................................69

Paddle Valve Assembly ...................................................................70

Valve Pack (10 Station) ....................................................................71

Valve Pack (5 Station) .....................................................................72


27/174

ROV Tooling - Table of Contents - 15


Torque Tools ...................................................... 74Torque Tool Class 1-4 .....................................................................74

Torque Tool Class 5 .........................................................................76

Torque Tool Gear Adapter ...............................................................77

Flying Lead Orientation Tool (FLOT) ...............................................78

Buckets (ISO) ...................................................................................80

Manipulator Tool ..............................................................................81

Pneumatic Torque Tool ....................................................................82

Torque Test Jig (Subsea) .................................................................84

Tooling Control Unit (TCU) ..............................................................85


28/174

16 - ROV Tooling - Cleaning Tools

Connector Cleaner

The Connector Cleaner allows cleaning of connector seal surfaces while

the connector is installed on a running tool. The tool uses a scissor type

jacking system to access the seal surface. The cleaning module is spring

loaded for uniform contact, and to limit overloading.

Hydraulic Requirements:

Input Pressure from ROV: ..........................................2,000 - 2,750 psiInput Flow from ROV: .............................................................. 3-5 gpm

Materials of Construction: 6061-T6 Aluminum Hard Anodized 316 Stainless Steel

17-4 Stainless Steel

UHMWPE Nickel Aluminum Bronze

Weight:In Air: ......................................................................................... 250 lb

In Saltwater: .............................................................................. 170 lb(Actual Weight Depends on Connector Size)


29/174

ROV Tooling - Cleaning Tools - 17


The Multipurpose Cleaning Tool (MCT) consists of a brush head rotated

by a hydraulic motor. The MCT uses a mild acid cleaning solution

dispensed through the brush head. The MCT is equipped with a handle for

ROV manipulator use.

Dimensions:Length: ............................................................................................15 inWidth: ..........................................................................................12.2 in

Height: ...........................................................................................8.5 in

Weight:In Air: .............................................................................................31 lbIn Saltwater: ................................................................................ 22 lb

Performance Data:Max Output Torque: .......................................................................9 ft-lbMax Input Pressure: ................................................................3,000 psi

Rotation: .......................................................Reversible / Bi-Directional

Interfaces:Hydraulic Fluid: .................................................Shell Tellus 22 or Equal

Acid:........................................................................ Citric or Acetic Acid

Item Weights:In Air: ..............................................................................................31 lb

In Saltwater: ...................................................................................22 lb

Multi-Purpose Cleaning

Tool (MCT)


30/174

18 - ROV Tooling - Cleaning Tools

The Oceaneering Mooring Line Cleaning Tool removes marine growth

without damaging the mooring lines outer protective coating. The tool

can be congured with various combinations of brushes for optimal

performance. The tool is hydraulically opened and closed for the docking

operation and integrated fail-safe locks keep the tool body closed during

operation. The 6-wheel integrated traction system can operate the tool

at any angle, while the suspension system enables the tool to handle

uneven surfaces while cleaning.

Specifcations:Depth Rate: .......................................................................... 3,000 msw

Weight in Air/Water: ........................................................... 169 / 122 kg

Size (LxWxH): ....................................................1,300 x 560 x 900 mmOperational Pressure: ................................................................207 bar

Max Input Flow: ........................................................................20 L/min

Connections Motor: ......................Oceaneering 6L Stab & ReceptacleConnections Cylinders: ................Oceaneering 6L Stab & Receptacle

Transport Case Size (LxWxH): ........................... 1,650 x 750x 670 mm

Mooring Line Cleaning Tool


31/174

ROV Tooling - Cutting Tools - 19


Oceaneerings Hard Line Cutter is a hydraulically-actuated manipulator-

deployed tool designed to cut through wire rope to 1-in thick. It consists

of a hardened tool steel blade and side plates, a hydraulic cylinder, and

a T-handle. The blade is attached to the cylinder ram between the side

plates. One side of each of the plates is open to allow the cutter to be

placed on the rope. When the cylinder is extended, the blade acts as a

guillotine, severing the rope between the blade and the side plates. The

cylinder is then retracted to allow for the next cut.

Specications:

Pressure: ...............................................................................10,000 psiFlow: .............................................................................................1 gpm

Opening: ........................................................................................1-5 in

Connection Type: ....................................................... HP Tube or Hose

Weight in Air: ..................................................................... 14 275 lb

Hard Line Cutter


32/174

20 - ROV Tooling - Intervention Tools

The Alignment Frame mounts to the front of an ROV and provides an

ROV docking interface. Once docked, the ROV is rigidly attached to

the subsea structure. The frame locks onto the tree via two 3-ton rated

docking probes.

The docking probes are hydraulically-actuated and are fail-safe. If ROV

power is lost, the latch dogs will retract under spring load and the ROV

will disconnect from the tree. The frame is designed to interface with the

3-ton docking receptacle interface utilizing a customer specied distance

between docking receptacles.

Alignment Frame


33/174

ROV Tooling - Intervention Tools - 21


Dimensions:Length: .....................................................................................5 ft 6.5 in

Width: ....................................................................................5 ft 3.75 inHeight: ............................................................................................. 7 in

Weight:In Air: ............................................................................................ 107 lb

In Saltwater: ...................................................................................95 lb

Hydraulic Requirements:Max Pressure: .........................................................................3,000 psi

Operating Pressure: ................................................................1,500 psiMax Flow Rate:.............................................................................3 gpm

End connections: ....................................................................... in JIC

Materials of Construction:Frame: ..................................................................... 6061 T6 Aluminum

Docking Probes: ..................................316 Stainless Steel, AMPCO 45

& UHMWPE PolyethyleneFasteners: ................................................................316 Stainless Steel

Specications


34/174


The AX/VX Gasket Tool is used to remove and replace the

18-in AX and VX style gaskets inside the wellhead hub. The tool

engages into the gasket bore and sits ush with the top of the gasketwhere it is energized with the ROV hydraulics. The cylinder forces

2 gripping pads to separate and grasp the inner bore of the gasket.

The bumps on the OD of the pads line up with the groove in the gasket

and prevent the gasket from sliding down.

Two compression springs keep the tool hooked up to the gasket if

hydraulic power is lost or interrupted.

The AX/VX Gasket Tool utilizes a exible T-handle to be positioned bythe ROV manipulator.

AX/VX Gasket Tool


35/174



Dimensions:Diameter: ...................................................................................20.38 in

Height: .......................................................................................20.50 in

Weight:In Air: ........................................................................................... 21.5 lbIn Saltwater: ................................................................................ 15.3 lb

Materials: ASTM A36

Coating:

3-Part Epoxy - Black

Hydraulic Requirements:Working Pressure: ...................................................................... 200 psi

Max Pressure: .........................................................................1,500 psi

Specications


36/174


The Gasket Removal Tool removes gaskets from hub connectors. The

tool ts within the connector and operates without damaging the sealing

surfaces.

SpecicationsHydraulic Requirements: .......................................... 250 psi @


37/174



The Hydraulic Power Unit (HPU) is used to test various types of subsea

tooling prior to deployment. The HPU is intended for usage on-deck or

during System Integration Tests (SIT).

A fan-type oil cooler is included in the HPU, which regulates oil temperature

returning to the tank. The system includes a thermal bypass valve,

allowing some heating of the oil if the unit is used in a cold environment.

The frame is provided with four lifting points, one at each corner. A drip

tray is incorporated underneath the frame to collect any oil spillage.

Dimensions:

Length: ............................................................................................56 inWidth: .............................................................................................42 inHeight: ............................................................................................42 in

Weight:In Air: .........................................................................................1,500 lb

Performance Data:Output Pressure: .................................................... 3,000 psi Maximum

Output Flow: .................................................................................5 gpmElectrical Requirements:

Phase 480 V AC, 60 Hz

The HPU can be customized to meet specic hydraulic power

requirements.

Hydraulic Power Unit (HPU)


38/174


The Oceanering impact wrench minimizes torque transmission to theoperator with its swing hammer design. The tool has proven reliability

and is easily maintained.

Dimensions:Drive Size: ............................................................1-1/2 in Square DriveWeight: ............................................................................ 43 lb / 19.5 kg

Overall Length: ............................................................. 16-1/2in / 41 cm

Width: ............................................................................... 5.1-in / 13 cm

Pressure Range:....................................1800 - 2000 psi / 124 - 140 bar

Flow Range: .....................................................7 - 12 gpm / 26 - 45 lpmOptimum Flow: ...............................................................8 gpm / 30 lpm

System Type: .....................................Open Center, HTMA Type II or III

Porting: ............................................................................8 SAE O-RingOutput Speed (Free Spin):.........................2,000 rpm at 5 gpm / 19 lpm

Input Speed: ..................................................1,200 Impacts per Minute

Connect Size & Type: ..................................... 3/8 in Male Pipe AdapterTorque: .......................................... 800 - 3,500 ft-lb / 1,088 - 4,760 Nm

Impact Wrench


39/174



The 9-Gallon Reservoir is designed to hold uids on an ROV or a skid

and adds greater exibility to subsea operations.

Dimensions:Length: ............................................................................................14 in

Width: .............................................................................................14 inHeight (Full): ..............................................................................14-24 in

Weight:Empty: ............................................................................................40 lb

Reservoir - 9 Gallon


40/174


The ROV Spring Release Shackle is designed to ease the release

of the pin from a shackle by means of a compressed spring.

Once the retaining pin is pulled, the spring forces the pin out of the shacklebody. This reduces time and potential damage to any equipment during

ROV operations.

Features: Custom Sizes Available Manually & Hydraulically Installed Versions Available

Based on Industry Standard Shackle Ratings & Dimensions

ROV Spring ReleaseShackle


41/174



The Oceaneering TA cap protects wellheads and allows ROV intervention.

The ROV can deploy and recover the lightweight aluminum or plastic TA

Cap without additional topside support equipment. Once secured, the

ROV can pump corrosion inhibitor uid into the TA Cap. A check valveensures that water is fully displaced by the corrosion inhibitor uid and

provides visual conrmation. TA caps can be custom built to t most

wellhead types and sizes.

Material: Aluminum / Urethane

API: 17-D/W Receptacle

TA Cap


42/174


The Subsea ROV Winch is lightweight and compact for easy handling.

The winch has 28,660 lb of pull and can operate without wires from

the surface. The Subsea ROV Winch is an independent tool without

mechanical or hydraulic connections to the ROV.

Depth Rate: ............................................................................ 8,200 fsw

Dimensions:Width: ..........................................................................................24.9 inLength: .........................................................................................20.5 in

Height: .........................................................................................43.5 in

Weight:In Air: ................................................................................................507In Saltwater: .................................................................................100 lb

Max Torque:.............................................................................. 562 ft-lbMax Pull: ..................................................................................28,660 lb

Breaking Force: .......................................................................42,990 lb

Interface to Torque Tool: ..................................API 17D Class 4 BucketInterface to Structure: ...................... API 17D Class 4 Lock to Structure

Mechanical Lock w/ Fail-Safe

Winch (Subsea ROV)


43/174

ROV Tooling - Cameras / Lighting / Displays - 31


Oceaneerings Color LED Camera is compact, and suitable

for general purpose viewing and manipulator arm applications.

The integral LED lighting allows the camera to be used in applications

that previously required a separate camera and lamp.

Power: ...................................................................... 24 V DC (200 mA)Video Signal: ................................................................... NTSC / 60 Hz

Horizontal Resolution: ............................................................. 350 lines

Light Sensitivity: ......................................................................... 0.1 Lux

Dimensions:Diameter: ....................................................................................... 1.5 in

Length: ..............................................................................................4 in

Weight:In Air: .............................................................................................0.5 lbIn Saltwater: ................................................................................0.33 lb

Depth Rating:..............................................................................9,842 ft

Color LED Camera


44/174

32 - ROV Tooling - Cameras / Lighting / Displays

The SeaSunMid Water Lighting System supports saturation diving or

ROV operations to 1,100 ft (335 m). The three-light frame is deployed

using an AK 7 double knuckle marine crane with the umbilical winch

mounted on the crane. The crane is supplied with a radio control pack

and an anti-two block system allowing for one man deployment. This

system utilizes modied 4000W lights, pressure compensated ballasts

and a power distribution box.

Features: Three 4000 W Arc Lights

Equivalent to 48,000 W of Incandescent Light

Isolated Power Supply with Integrated Resistance Monitor Greatly Improves Diver Safety

Specications:

Output in Lumens: ................................................................. 1,140,000

Color Temperature: ...................................................6,000 K (Daylight)

Depth Rating: ................................................................1,100 ft / 335 mShallow Water System: .................................................... 300 ft / 90 m

Footprint on deck: ..................................................................8 ft x 20 ftPower Requirements: ...............480 V AC (Ships Power or Generator)

*SeaSunis a registered trademark of HydroFlex Inc.

Lighting System -Mid Water (4000W)


45/174



The SeaSun4000W Lamp is a single work light system. It is built withthe same offshore durability of the SeaSun3 Lamp System, but the

4000W lamp is designed with a very small deck footprint allowing the

diver to bring the light exactly where it is needed. It is a space and cost

saving option that increases safety at dive sites.

Features: 4000 W Arc Light

Equivalent to 16,000 W of Incandescent Light Isolated Power Supply with Integrated Resistance Monitor

Work Light Is Compact & can be Deployed & Recovered by Hand Allows Divers to Place the Light Directly at the Work Site

Rugged PVC Cowling Protects the Light

Greatly Improves Diver Safety Work Light Conforms to UL Std. #1573 & CE Std. #EN60598-2-17

Specications:

Output in Lumens: ................................................................... 380,000Color Temperature: ...................................................6,000 K (Daylight)Depth Rating:..................................................................... 300 ft / 90 m

Power Requirements: ...............480 V AC (Ships Power or Generator)

*SeaSunis a registered trademark of HydroFlex Inc.

Single Work Light (4000W)


46/174

34 - ROV Tooling - Cameras / Lighting / Displays

The Subsea Intelligent Display (SID) is a multi-purpose display that takes

input from various sources, such as pressure, torque and pH. The tool is

primarily used in conjunction with Subsea Torque Test Jigs and Pressure

Displays, but can be used for other applications.

The Subsea Intelligent Display interfaces to an ROV by RS232 link and

can be powered by the ROV. The data can be monitored topside by a

Graphical User Interface (GUI).

Subsea Intelligent Display(SID)


47/174



Features: 5 Digit Multi-Purpose Programmable Display

Self-Powered From Internal Battery User Programmable Display Range

User Programmable Sleep Mode Photo Diode Enables the Device in Presence of Ambient Light

(Power Saving Mode)

Sampling Rate: Programmable

Depth Rating: 10,000 fsw

Material: Stainless Steel

DimensionsLength: ..............................................................................................6 in

Diameter: ..........................................................................................6 in

WeightIn Air: ........................................................................................... 11 lb

Battery Life: Up to 70 Hours Continuous

Specications


48/174

36 - ROV Tooling - Linear Valve Override Tools (LVOT)

The J-Lock Tool provides locking functions to valves with a J-Lock bucket.

The tool consists of a Nickel-Aluminum-Bronze alloy body, a Nitronic 50

Stainless Steel Acme thread screw with pinned -in ROV T-Handle, and

an additional -in ROV T-Handle attached to the body to allow the ROV

to stabilize.

Maximum Load Capacity: 50,000 lbf

Working Load: 30,000 lbf

Dimensions:Stroke .............................................................................7 in (0 to 10 in)

Height: ...................................................................24 in (with T-Handle) of Base: ......................................................................................9.6 in

Width (Maximum): .........................12.93 in (with Stabilizing T-Handle )

Weight:In Air: ........................................................................................... 60 lb

In Saltwater: ................................................................................ 55 lbMaterials of Construction:

Nitronic 50 Stainless Steel

Nickel Aluminum Bronze 316 Stainless Steel Fasteners

Silver Anti-Seize Thread Lubricant

J-Lock Tool


49/174

ROV Tooling - Linear Valve Override Tools (LVOT) - 37


The Linear Valve Override Tool (LVOT) uses ROV hydraulics to actuate a

gate valve stem on subsea equipment. The LVOT interfaces with API 17D

& 17H (ISO 13628-8) and type A, B, or C anges. An optional Lock Outsystem can be added to hold the valve in position for extended periods of

time without hydraulics.

Linear Valve Override Tool

(LVOT)


50/174


The Collet Linear Override Tool (CLOT) operates linear actuated gate

valves on subsea manifolds. The tool allows the user to access API B

interface anges located as deep as 25-in below the manifold cover plate,

provided there is at least a 16-in diameter access hole above the valve.

The CLOT operates on intensied hydraulic power provided by an ROV.

This tool can be ordered for short term or long term subsea use.

Hydraulic Requirements: 1,600 psi @ 3 gpm into Intensier Panel

Cylinder Stroke: To 7 in

Depth Rating: 9,000 ft

Weight:

In Air: ......................................................................................... 540 lbIn Saltwater: .............................................................................. 465 lb

Dimensions:Diameter: ........................................................................................ 14 inLength: ............................................................................................47 in

Design Load: 130,000 lb

Collet Linear Override Tool(CLOT)


51/174

ROV Tooling - Linear Valve Override Tools (LVOT) - 39


The Simplied Lockout Tool (SLOT) provides locking functions to valves

with an API B interface located approximately 25-in below the manifold

cover plate. The tool consists of a Nickel-Aluminum-Bronze alloy body,a Nitronic 50 Stainless Steel Acme thread screw with pinned -in ROV

T-Handle, and an additional -in ROV T-Handle attached to the body to

allow the ROV to stabilize. A cable for attaching the tool to the corrosion

protection system is also provided.

Maximum Load Capacity: 190,000 lbf

Working Load: 90,000 lbf

Dimensions:Stroke ...............................................................................10 in (0-10 in)

Height: ............................................................. 32.28 in (with T-Handle) of Base: ....................................................................................9.60 in

Width (Maximum): .......................... 12.93 in (with Stabilizing T-Handle)

Weight:

In Air: ......................................................................................... 115 lbIn Saltwater: .............................................................................. 100 lb

Materials of Construction: Nitronic 50 Stainless Steel Nickel Aluminum Bronze

316 Stainless Steel Fasteners

Silver Anti-Seize Thread Lubricant

Simplied Lockout Tool

(SLOT)


52/174


The main application of the Tree Crack Open Tool (TCOT) is to keep

tree valves cracked open during installation. Once subsea, the tool can

be removed from the valve using a standard class 1-4 torque tool. This

tool is a low cost solution compared to standard LVOTs for this type of

application.

Stroke: 0 to 5.8 in Nominal

Crack Open Force:

0 to 60,000 lb

Weight:In Air: ............................................................................................120 lbIn Saltwater: .................................................................................100 lb

Tools Required: Class 4 Torque Tool

Manual Torque Tool

Tree Crack Open Tool(TCOT)


53/174

ROV Tooling - Measurement Tools - 41


The Subsea Caliper Tool is an ROV-operable measurement device. The

tool is easily congured for wide-ranging measurement applications with

accuracy to 0.01 in.


Width: ...............................................................................................6 inHeight: ............................................................................................24 in

Measurement Range: ..............................................................0 to 13 in

Stroke Length: ..................................................................................8 in

Weight:In Air: ..............................................................................................69 lb

In Saltwater: ...................................................................................55 lb

Materials: 6061 Aluminum

Coating: Hard Anodized

Interface:Power Requirements: ........................................................24 V DC, 2 ACommunications Protocol: ..........................................................RS232

Baud Rate: ...................................................................................19,200

Data Bits: ..............................................................................................8Parity: ............................................................................................None

Stop Bits: ..............................................................................................1

Caliper Tool


54/174

42 - ROV Tooling - Measurement Tools

The Oceaneering Subsea Chain Caliper Tool is an ROV deployablemeasurement device. The tool is capable of measuring both grip and

crown chain dimensions. Different size chains can be measured with

simple tool reconguration.

This tool has been certied by Offshore Classication Canada with an

accuracy to 0.02 inches.

Chain Caliper Tool


55/174




Width: ............................................................................................. 17 inHeight: ............................................................................................29 in

Measurement Range: ................................................................... 0-8 inStroke Length: ..................................................................................8 in

Weight:In Air: ............................................................................................ 317 lbIn Saltwater: .................................................................................257 lb

Materials: 6061 Aluminum

Coating: Hard Anodized

Interface:Power Requirements: ........................................................24 V DC, 4 A

Communications Protocol: ..........................................................RS232

Baud Rate: ...................................................................................19,200

Data Bits: ..............................................................................................8Parity: ............................................................................................None

Stop Bits: ..............................................................................................1

Specications


56/174


The Subsea Data Logger monitors pressure and temperature and is

a logging device. The Data Logger is a stand-alone tool powered by

batteries and capable of a low-power sleep mode. Once data logging

is complete, a Graphical User Interface (GUI) on the Topside Controller

Laptop can extract the data in a text le format.

Features: 5 Digit Display Self-Powered from Internal Batteries

Pressure Side has a 17H Dual Port or 17H High Flow Hot Stab

Photo Diode Enables the Device in Presence of Ambient Light(Power Saving Mode)

Stainless Steel Subsea Housing

Specications:

Pressure Range:.................................10,000 or 15,000 psi (Full Scale)Resolution ................................................................................ 0.01 psi

Accuracy ............................................................... < 0.01% of full-scale

Data Sets .......................................... 5,120,000 (Single Channel Mode)2,560,000 (2-Channel Mode)

Sample Rate ..................................................................... 1 sample/sec

Depth Rating ....................................................................... 10,000 fsw

Battery Life: ............................................... Up to 70 Hours Continuous

Data Logger (Subsea)


57/174



Inclinometers can be ush mounted or custom brackets can be designed

to customer specications. Machined graduations are superior to sticker

graduation type designs. Inclinometers are individually packaged for

maximum protection during shipment. As with all Oceaneering products,

these inclinometers are designed, assembled and tested to the highest

industry standards.

Inclinometers:Working Depth: .....................................................................to 4,000 mAvailable Angle Ranges: ........................................... 5, 7, 10 & 15

Slotted Mount Holes Allow for Adjustment & Calibration

Materials: Hard Anodized 6061 Aluminum

Custom Designs Available

Inclinometer


58/174


The Digital Inclinometer is a pitch and roll sensor for use in subsea or

surface applications. It provides an accuracy of 0.05 degrees in both

axes over the full 360 range.

The inclinometer can be used as an ROV connected tool with

data displayed live on a surface laptop or when used in

conjunction with the subsea display and battery pack it can operate as a

stand-alone tool.

Inclinometer (Digital)


59/174



Electrical Requirements:Input Voltage: .....................................................................5 30 V DC

Current Consumption: ............................................


60/174


The Oceaneering subsea Intelligent Pressure Transducer provides high

accuracy pressure and temperature readings at depths to 10,000 fsw.

The output format (RS232) and 24 V DC power requirement allow fast

integration with most ROVs and subsea control systems.

A dedicated, user-friendly, Topside Graphical User Interface (GUI),

displays the data from the Subsea Intelligent Pressure Transducer. From

the GUI, the user can monitor and log pressure data in ASCII format.

Dimension:Diameter: ..........................................................................................2 in

Length: ........................................................................................... 7.2 in

Specications:

Material: ...................................................................316 Stainless Steel

Electric Connector: ....................................................Burton 5500-1508

Hydraulic Port: ........................................................Autoclave .25 in MP

Power Requirement: .............................................. 8-30 V DC, 200 mWOutput: .........................................................................................RS232

Communication: .....................................................RS232 (Full Duplex)Pressure Range:.............................................................0 to 20,000 psi

Static Accuracy:...........................................................0.05% Full Scale

Operating Temperature Range: ..................................... -40C to +85C

Intelligent PressureTransducer


61/174



The subsea pH Meter is a self contained, self-powered tool that reads the

pH in water depths to 10,000 fsw. This tool can be used by a wide range

of ROVs. The pH reading is displayed on an Intelligent Display that can

toggle between awake mode or sleep mode by ashing the ROV lights.

The Intelligent Display also allows the control of the pH measurement

update time, automatic sleep mode, and other features.

Dimensions:Diameter: .......................................................................................6.5 in

Length: ......................................................................................... 37.5 in

Material 17-4 Stainless Steel

pH Lexan

PH Range: ................................................................................1 to 14

Battery Life (Awake Mode): ...................................72 hours (Maximum)

Display Time: ..................................................................Programmable

Sampling Rate: ...............................................................Programmable

pH Meter (Subsea)


62/174

50 - ROV Tooling - Pumps

Oceaneering has designed and built a range of Duplex Pumps. These

pumps are based upon a reciprocating piston intensier with xed

displacement.

Hydraulically powered by the host ROV, the pumps are available in two

sizes, the 15 hp Series and the 50 hp Series, with a wide range of pressure

ratios available in each series.

These pumps are the basis for multiple tooling applications,including subsea hydrotesting, hydrate remediation, and general

uid intervention. These pumps are not compatible with methanol.

For methanol-compatible pumping, use the Duplex Plunger Pump.

Duplex Pump


63/174

ROV Tooling - Pumps - 51


Standard 15 hp Series:Hydraulic Supply:......................................................3,000 psi to 8 gpm

Weight in Air: ............................................................................... 40 lbWeight in Saltwater: .................................................................... 30 Ib

OI Part # Input / Output Max Output Max Output

Ratio Pressure psi Flow gpm

0025594 ...........1.94:1 .........................5,500 ............................3.50027012 ............3.76:1 ........................10,500 ...........................1.8

0026646 ........... 6.11:1 .........................17,500 ............................ 1.1

Standard 50 hp Series:Hydraulic Supply: ...................................................3,000 psi to 24 gpm

Weight in Air: ............................................................................... 85 Ib

Weight in Saltwater: ................................................................... 70 Ib

OI Part # Input / Output Max Output Max Output

Ratio Pressure psi Flow gpm0031802 ............1.56:1 .........................4,400 ...........................12.0

0277359 ...........4.22:1 ........................12,000 ...........................4.5

Manual / piloted version available for ne control of discharge pressure

when pressurizing small volumes.

Fluid Compatibility: Saltwater

Hydraulic Fluids Control Fluids (HW 525, 1443 etc)

Specications


64/174

52 - ROV Tooling - Pumps

The Oceaneering High-ow Axial Piston Intervention (HAPI) pump

delivers high pressure (0-5,000 psi) at ow rates of approximately 10 gpm.

The pump is coupled to a bent axis hydraulic motor that is driven by the

ROV and is activated by a pilot operated control valve. The stainless steel

pump functions using water based control uid subsea for long periods

of time.Specications:

Hydraulic Supply:................................................... 3,000 psi @ 30 gpm

Weight in Air: ................................................................................ 150 lb

Weight in Water: ............................................................................ 90 lb

High-Flow Axial Piston Intervention(HAPI) Pump


65/174

ROV Tooling - Pumps - 53


The Marston Bentley (MB) Pump provides an isolated hydraulic power

supply to operate subsea tools without compromising ROV hydraulic

uids.

Pressure (Maximum Input): .....................................................2,850 psi

Flow (Maximum Input): .................................................................6 gpmMarston Bentley Output:

1,500 psi @ 3.5 gpm 2,500 psi @ 3.5 gpm

3,000 psi @ 3 gpm

Marston Bentley Output with Intensier:

1,500 psi @ 3.5 gpm 2,500 psi @ 3.5 gpm

10,000 psi @ 1.5 gpm

Marston Bentley (MB)

Pump


66/174

54 - ROV Tooling - Skids

The Auxiliary Hydraulic Power Unit (AHPU) skid is designed for complete

uid intervention between the ROV system and subsea equipment via

multiple client specied hot stabs. The neutrally buoyant skid is mounted

under the host ROV, with hydraulic and electrical power supplied by the

ROV.

The Skid is operated from a topside computer mounted in the ROV control

room. Custom software provides the user with real-time information on

pressure, ow and available reservoir volume, along with critical system

information such as water ingress alarms.

AHPU Intervention Skid


67/174

ROV Tooling - Skids - 55


Hydraulic Supply: 2,850 psi @ 10 gpm (Nominal)

Glycol / TransAqua HT Circuit: 15 gal Storage

Reservoir with Volume Indicator Discharge & Return Flowmeters

5,000 psi Pump / 3.5 gpm

15,000 psi Pump / 0.5 gpm Manifold with 3 Bi-Directional Outputs (5,000 psi)

Digital Pressure Transducers

Corrosion Inhibitor Circuit : 15 gal Storage Reservoir with Volume Indicator

200 psi Output Pressure / 2 gpm

Hydraulic Tooling Functions: 4 Bi-Directional Functions 3,000 psi @ up to 10 gpm each

Each with Proportional Pressure & Flow Each with Differential Digital Pressure Transducers

Weight:In Air Dry: ...................................................................................1250 lb

In Air with Fluids: .......................................................................1,380 lb


Width: .............................................................................................60 in

Height: ............................................................................................26 in

Specications


68/174


The Fluid Injection Skid is ROV-mountable to carry and supply injected

uids. The skid is equipped with two or four sixteen-gallon uid reservoirs

and a hydraulic pumping system that can pump the uid at low or high

pressure.

The reservoir uid contained in the injection skid is isolated from the

ROVs hydraulic system. Fluid can be pumped from or returned to the

uid reservoirs. The maximum pressure of the returning uid is 150 psi.

Fluids used with the Injection Skid can be any type of petroleum-based or

water-glycol-based hydraulic uid.

Fluid Injection Skid


69/174




Width: .............................................................................................58 inHeight: ............................................................................................20 in

Weight:In Air: ............................................................................................850 lb

In Saltwater: .................................................................................600 lb

Performance Data:Reservoir Capacity: .......................................................... 32 or 64 gal *

Output Pressure: ......................................................100 to 15,000 psi *Output Flow: ...................................................................0.5 to 3 gpm **

Input Pressure: ..........................................................1,000 to 3,000 psiInput Flow: .............................................................................4 to 6 gpm

Fluid Compatibility:ROV Input Fluid: ................................ Petroleum Based Hydraulic Fluid

High Pressure Output Fluid: ..............................................Petroleum orWater Based Hydraulic Fluid

Materials:Frame: ..................................................................... 6061-T6 Aluminum

Fasteners: ................................................................316 Stainless SteelBumpers: ..................................................................... Black UHMWPE

Reservoirs: .......................................................Spun Fiberglass Tubing

* These values are variable and can be specic to client requirements.

** Flow rates are inverse to pressure outputs, high pressure outputs

have lower ow rates.

Specications


70/174


The 4,000 meter Injection Skid is an ROV mountable skid capable of

carrying 96 gallons of product and able to inject product at 5K and 15Kpsi via two duplex pumps and hot stabs. The ROV manually actuates the

isolation valves as the skid is non-electronic. The skid is equipped with

2 API docking cones for interfacing with subsea equipment.

The reservoir uid contained in the injection skid is isolated from the

ROV's hydraulic system. Fluid may either be pumped from or returned to

the uid reservoirs.

Fluids used with the injection skid may be any type of petroleum based,water glycol based hydraulic uid or methanol.

Injection Skid - 4,000 m


71/174



Dimensions:Length: ....................................................................................... 131.5 in

Width: .............................................................................................62 inHeight: .......................................................................................32.25 in

Weight:In Air Empty: ..............................................................................2,425 lb

In Air Full: ..................................................................................3,225 lb

In Water: .......................................................................100 lb (Buoyant)

Performance Data:

Reservoir Capacity: ......................................................................96 galOutput Pressure: ............................................................... to 15,000 psi

Output Flow: .......................................................................0.5 to 2 gpmInput Pressure: ..........................................................1,000 to 3,000 psi

Input Flow: .............................................................................0 to 5 gpm

Depth Rating:.............................................................................4,000 m

Fluid Compatibility:ROV Input Fluid: ................................ Petroleum Based Hydraulic Fluid

High Pressure Output Fluid: ............................Petroleum, Water BasedHydraulic Fluid or Methanol


Fasteners: ................................................................316 Stainless Steel

Reservoirs: .......................................................Spun Fiberglass Tubing

Specications


72/174


The Methanol Injection Skid is mounted beneath the ROV and supplies

32 or 64 gallons of uid for methanol injection. The skid consists of an

aluminum frame, two or four uid reservoirs, and a hydraulic pump for

discharging the methanol uid.

The methanol is contained in two or four sixteen-gallon uid reservoirs,

which are compensated to external pressure. The reservoir uid contained

in the injection skid is isolated from the ROVs hydraulic system.

Since methanol is not injected at high pressures, the skid uses a low-

pressure pump instead of a high-pressure intensier. The seals used in

the reservoirs and pumping systems are also compatible with methanol

service.

Methanol Injection Skid


73/174




Width: .............................................................................................58 inHeight: ............................................................................................20 in

Weight:In Air: ............................................................................................850 lb

In Saltwater: .................................................................................600 lb

Performance Data:Reservoir Capacity: ........................................................... 32 or 64 gal*

Output Pressure: ........................................................................100 psiOutput Flow: .................................................................................3 gpm

Input Pressure: ........................................................................2,800 psiInput Flow: .............................................................................4 to 6 gpm


Fasteners: ................................................................316 Stainless SteelBumpers: ..................................................................... Black UHMWPE

Reservoirs: ................................. Spun Fiberglass Tubing, Painted Red

*These values can be changed to meet client requirements.

Specications


74/174

62 - ROV Tooling - Stabs / EQD / Manifolds / Valves

Oceaneering API 17D, API 17H and high ow hot stabs and receptacles are

manufactured and tested to the highest industry standards. These stabs

are used for uid injection. All products are supplied with test certicates,

Certicate of Conformity (COC), and are individually packaged to protect

critical sealing surfaces.

Hot Stabs & Manifolds


75/174

ROV Tooling - Stabs / EQD / Manifolds / Valves - 63


Specications for 17H High Flow:

Pressures: ..............Up to 10,000 psi (17H Single Port High Flow Stab)

Flow: ....................................... 2 bpm (17H Single Port High Flow Stab)Connection Types: ........................Various Sizes in JIC, NPT, MP & HP

Materials: Nitronic 50 & 60, 316 Stainless Steel, & 17-4 Stainless Steel

ROV Interface: .............................Compliant & Rigid Handles Available

Specications for 17D Dual Port:

Pressures: ......................................................................... to 10,000 psi

Flow: .......................................................................................to 10 gpmConnection, Stabs: ............................................................... 0.25 in JIC

Connection, Manifolds: .....................................Various Porting OptionsSingle & Dual Port Confgurations Available

Pressure Retaining & Non-Pressure Retaining Dummies are Available

Materials: ...................................Nitronic 50 & 60 & 316 Stainless SteelROV Interface: ..........................316 Stainless Steel, Compliant & Rigid

T- Handles, D-Rings & Fishtail Types Available

Specications for 17H Dual Port:Pressures: ...............................................................10,000 - 15,000 psi

Flow: .......................................................................................to 10 gpm

Connection, Stabs: ............................................................... 0.25 in JICConnection, Manifolds: .....................................Various Porting Options

Single & Dual Port Confgurations Available

Pressure Retaining & Non-Pressure Retaining Dummies are Available

Materials: ...................................Nitronic 50 & 60 & 316 Stainless Steel

ROV Interface: ..........................316 Stainless Steel, Compliant & RigidT- Handles, D-Rings & Fishtail Types Available

Custom Designs Available

Specications


76/174


Oceaneering 2 & 4 inch hot stabs are used for ooding, dewatering and

pigging. All Standard Hot Stabs and Receptacles are manufactured and

tested to the highest industry standards. They are individually packaged

to protect critical sealing surfaces. All products are supplied with test

certicate and COC.

2 Inch:Pressures: ...........................................................................to 5,000 psi

Flow: .....................................................................................to 200 gpm

Connection Types: Grayloc

Custom Connections Available

Materials:

316 Stainless Steel 17-4 Stainless Steel

4 Inch:Pressure: ....................................................... 3,000 psi Maximum InputConnection Type: ...................................................... 4 in GraylocHub

Size & Weight - Male Stab:

Diameter: ....................................................................................... 7.5 in

Length: ........................................................................................17.75 in

Weight: ...........................................................................................45 lb

Size & Weight - Female Receptacle:

Width: ............................................................................................9.5 in

Length: .......................................................................................10.25 inHeight: .........................................................................................12.0 in

Weight: ......................................................................................... 172 lb

Hot Stabs (2 & 4 Inch)


77/174

ROV Tooling - Stabs / EQD / Manifolds / Valves - 65


The Oceaneering Gauge Pack Stab is a Standard 17H dual port stab,

with added isolation valves and gauges. The Gauge pack stab is used

to pressure test systems, so that the pressure can be isolated between

the subsea equipment and the stab. This compact design eliminates the

need for extra hardware on the ROV.

Specications:Pressures: ................................................................... Up to 10,000 psiConnection Types: .................................................................... in JIC

Materials: Nitronic 50 & 60

316 Stainless Steel 17-4 Stainless Steel

Aluminum

ROV Interface: Compliant Handles

Custom Designs Available.

Gauge Pack Stab


78/174


The Oceaneering Quad Zero Leak Stab and Receptacle offers a quick

disconnect type connection for 1 to 4 ports. The stab can be congured

for 2-position directional control as well. Porting on the male side is routed

out and away from the body to aid in hose management. The recessed

male connectors are protected by an impact-resistant nose and the

stab body is hard-anodized aluminum, reducing weight and simplifying

manipulation.

Specication 1/4 inch:Pressure (Maximum Input): .....................................................3,000 psi

Flow: ...............................................................................5 gpm per portConnection Type: ..................................................... in JIC (pictured)

Size & Weight:

2013 Dts Catalog PDF

Documents

Transcript of 2013 Dts Catalog PDF