2012HW#2 Assignment

2
ME 3227 Elements of Machine Design Homework #2, Due on Thursday, Feb. 7, 2013 3-7 For the beam illustrated in the figure, find the reactions at the supports and plot the shear-force and bending-moment diagrams. Label the diagrams properly and provide values at all key points. 3-8 For the beam illustrated in the figure, find the reactions at the supports and plot the shear-force and bending-moment diagrams. Label the diagrams properly and provide values at all key points. 3-15 For each of the plane stress states listed below, draw a Mohr's circle diagram properly labeled, find the principal normal and shear stresses, and determine the angle from the x axis to 1 . Draw stress elements as in Fig. 3-11c and d and label all details. (b) x =16 kpsi, y =9 kpsi, xy =5 kpsi ccw (d) x =-12 kpsi, y =22 kpsi, xy =12 kpsi cw 1

description

Thermodynamics homework

Transcript of 2012HW#2 Assignment

Page 1: 2012HW#2 Assignment

ME 3227 Elements of Machine Design

Homework #2, Due on Thursday, Feb. 7, 2013

3-7 For the beam illustrated in the figure, find the reactions at the supports and plot the shear-force and bending-moment diagrams. Label the diagrams properly and provide values at all key points.

3-8 For the beam illustrated in the figure, find the reactions at the supports and plot the shear-force and bending-moment diagrams. Label the diagrams properly and provide values at all key points.

3-15 For each of the plane stress states listed below, draw a Mohr's circle diagram properly labeled, find the principal normal and shear stresses, and determine the angle from the x axis to 1. Draw stress elements as in Fig. 3-11c and d and label all details. (b) x=16 kpsi, y=9 kpsi, xy=5 kpsi ccw(d) x=-12 kpsi, y=22 kpsi, xy=12 kpsi cw

3-37 For the beam illustrated in the figure, find the locations and magnitudes of the maximum tensile bending stress due to M and the maximum shear stress due to V.

3-38 For the beam illustrated in the figure, find the locations and magnitudes of the maximum tensile bending stress due to M and the maximum shear stress due to V.

1