2012 BIO-CIRCLE Systemh24-files.s3.amazonaws.com/132580/370956-3vdBA.pdf2012 BIO-CIRCLE System...
Transcript of 2012 BIO-CIRCLE Systemh24-files.s3.amazonaws.com/132580/370956-3vdBA.pdf2012 BIO-CIRCLE System...
2012 BIO-CIRCLE System
bio-chem.de • bio-circle.de
MAKING GREEN WORK.
Bio
-Circ
le S
urfa
ce T
echn
olog
y G
mbH
• B
IO-C
IRC
LE k
omb
• Fly
09 •
2012
EN
Subj
ect t
o te
chni
cal a
ltera
tions
. Any
liab
ility
for m
ispr
ints
exc
lude
d. A
ll te
xts
and
illust
ratio
ns c
onta
ined
her
ein
are
copy
right
ed.
free!VOC
The perfect solution to every requirement:Natural, organic parts washing
2 BIO-CIRCLE
Conscious that we bear responsibility for the environment, as long ago as 1996 we implemented a fully integrated environmental management system, which was cer-tified by LRQA in accordance with the globally valid DIN ISO 14.001 standard. As an ecologically oriented enterprise we not only attach greatest importance to optimum product performance but also to optimum environmental compatibility. The certifica-tion attests that we deal sensibly with resources, with raw materials for the produc-tion as well as with energy and water, and that we also handle waste responsibly. “In our opinion, voluntary participation in this environmental management system is the right way towards continuous improvement of environmental protection,” says Birgit Große, GM Germany.
For documentations, certificates, application examples, and videos please referto our web page www.bio-circle.de. We will be happy to provide you with the documents required also by post, fax or E-mail.
Environmental protection and quality
* The solvent regulation governs the requirements concerning surface cleaning devices. The operators of such devices have to give proof of their observing
the established VOC emission limit values because solvent fumes are hazardous to health and pollutive, and they carry a fire- and explosion hazard.
It is easy to use; even heavily contaminated parts are cleaned in a fast, secure and eco-friendly way; the VOC free liquid has a very long lifetime; the BIO-CIRCLE cost-effectiveness cannot be beaten. The BIO-CIRCLE runs without solvents and helps you meet the high requirements of the currently effective solvent regulation* (Germany: 31. BImSchV [31st Federal Immission Control Re-gulation], Austria: VOC-Anlagen-Verordnung [VOC Plant Regu-lation] – VAV). Replace your cold cleaner parts washer with the BIO-CIRCLE and make an active contribution towards increa-sing occupational safety for your staff, and towards protecting the environment.
The trendsetting parts-washing system designed by bio-chem.
The BIO-CIRCLE is comfortable to use and ecofriendly, and it offers the optimal solution to any cleaning requirement.
33
BIO-CIRCLE MaxiBIO-CIRCLE Compact
Parts washing is supposed to be simple and safe. What matters here are reliable aides. BIO-CIRCLE offers an exten-sive range of parts washing devices that meet even the highest requirements on ease of use, reliability, and suitability for daily use.
The advantages: ergonomic, user-friendly design
sturdy, robust device made from synthetic material (PE), no risk of corrosion
triple filter system: coarse filter, fine filter, magnet
particularly maintenance-friendly – the control box contains the entire control- and pump system, and can be exchanged easily and fast in case of malfunctions. Furthermore the electricity is splash-proof.
the tank is double-walled which affects as isolation. Loss of heat is reduced.
free!VOC
BIO-CIRCLE Mini
You’re welcome to benefit from our long experience in the field of natural, biological parts washing. Our trained staff will be happy to assist you competently with their specialist knowledge.
Telephone: +49 (0)5241 9443-0
E-mail: [email protected]
4 BIO-CIRCLE
The compact one The BIO-CIRCLE Compact impresses with its high-performance functions, and its compact design saves space in the plant.
ideally suited for small rooms or confined spaces
the draining device makes the exchange of the BIO-CIRCLE Liquid easier
maintenance-friendly due to its hinged upper section
the three-filter system and an additional fine mesh filter increase the effectiveness of the BIO-CIRCLE cleaning media.
We have been conferredthe 2007 Innovation Award“Environmental Technology”by the Initiative Mittelstand.
Maxi
Compact
The sturdy oneThe BIO-CIRCLE Maxi is a high-performance, sturdy and durable parts washer. It scores with its ease of use and high payload.
large effective surface, plenty of space even for cumbersome parts that can be cleaned perfectly with the long hose on the brush
easy handling with push-button switch
the hinged upper section with its gas spring guarantees easy servicing, maintenance and repair
lid (optional feature) protects from contamination
55
Work surface (W x D)
Payload
Working height
Operating temperature
Heating
Pump
Optimum filling quantity
Material
Empty weight
Power supply
Order number
BIO-CIRCLE Mini610 x 500 mm
90 kg
1010/820 mm
15 – 48 °C, Factory-set
at approx. 41 °C
approx. 700 W
40 W
80 litres
LDPE
approx. 40 kg
230 V, 50 Hz
G70026
BIO-CIRCLE Compact740 x 540 mm
100 kg
1040/900 mm
15 – 48 °C, Factory-set
at approx. 41 °C
approx. 700 W
40 W
90 litres
LDPE
approx. 45 kg
230 V, 50 Hz
G50026
BIO-CIRCLE Maxi880 x 580 mm
220 kg
960/820 mm
15 – 48 °C, Factory-set
at approx. 41 °C
approx. 700 W
40 W
100 litres
LDPE
approx. 60 kg
230 V, 50 Hz
G60026
The flexible oneThe BIO-CIRCLE Mini makes you mobile and flexible, and you can work comfort-ably in changing locations.
tried and tested reliable parts washing system in a flexible design
integrated trolley with two stationary and two steering castors
manoeuvrable and easy to push, can be utilized quickly in changing locations
maximum filling capacity: 80 L
Mini
6 BIO-CIRCLE
The BIO-CIRCLE Turbo stainless steel– the effective combination of fully automated and manual cleaning.A maintenance-friendly high-pressure spray system in combination with the biore-medial cleaning medium BIO-CIRCLE L Turbo provides for thorough cleaning anddegreasing of work pieces. With its powered rotating rack and the high spray pres-sure of 4 bars BIO-CIRCLE L Turbo has an optimal effect on the items to be cleaned.For fast and precise manual cleaning the brush or the nozzle can be used insteadof automatic cleaning.
2 in 1 – automatic and manual cleaning
We have been conferredthe 2008 Industrial Award“Environmental Technology”by the Initiative Mittelstand.
sturdy V2A stainless steel design with a payload of 350 kg, heatable, factory-set at 50 °C
robust stainless steel basket with mechanical rotation, momentary switch for rotating the basket in idle state – for easy loading/unloading and manual cleaning
a circuit breaker prevents the pump motor from running while the lid is open – safe handling guaranteed
ergonomic hand spray gun with quick release fastener for cleaning brush and variable cleaning nozzle (generates a precision jet – removes contaminations from inaccessible spots, or an area jet – cleans smooth surfaces) fast drying possible by means of a pneumatic spray gun
tank with slightly tilted bottom for faster emptying, tank cover with filter elements beneath the basket, with dry running protection
a time switch controls the duration of the automatic cleaning and pro-vides optimal ease of use
Turbo
BIO-CIRCLE Turbo: 2 in 1 – automatic and manual cleaning
77
Stainless steel top piece for BIO-CIRCLE The convincing features of the stainless steel top piece for the BIO-CIRCLE are its large work surface and high payload (up to 500 kg). It is ideally suited for the cleaning of big and heavy parts.
particularly large work surface (1500 x 950 mm) that can be used by two operators at the same time
conical drain with a 600 μm sieve filter
easy loading possible by means of a crane
PE grids (optional) for protection maximum load without base frame 250 kg, maximum load with base frame (square tube frame) 500 kg
Overall width (mm) x Depth (mm)
Height, lid closed (mm)
Height, lid open (mm)
Internal diameter basket (mm)
Height basket (mm)
Hight max. pag (mm)
Payload (kg)
Empty weight (kg)
Electric outlet (kW)
Power supply (V/Hz)
Spray pressure (bar)
Heater output (kW)
Tank capacity (L)
Air supply (bar)
Tested in accordance with
Order number
BC Turbo 800
1060 x 1140
1560
1965
775
115
470
150
330
5,5
400 / 50
2,5 / 4,8
4,5
160
max. 6
CE
G40027
BC Turbo 1000
1250 x 1340
1560
1965
975
115
470
250
380
8,5
400 / 50
4 / 12
6
220
max. 6
CE
G42027
BC Turbo 1200
1470 x 1575
1800
2300
1175
115
650
350
430
12
400 / 50
4 / 12
9
385
max. 6
CE
G43027
8 BIO-CIRCLE
The new BIO-CIRCLE Liquid range – the right solution for any application! The BIO-CIRCLE Liquids are specialists in clean solutions. They stand out for their fast and thorough cleaning performance. The natural micro-organisms they contain degrade the oil ingressed and guarantee long durability and a long serviceable life with a constantly high cleaning performance. The aqueous BIO-CIRCLE Liquids do not contain any solvents, thus avoiding VOC emissions, and meet the requirements of the solvent directive. They do not require placarding/labelling under the Ordinance on Hazardous Substances and EU Directive, and are therefore easy and safe to use, store, and transport.
We will be happy to advise you on which BIO-CIRCLE Liquid is the right one for you. We give competent advice and valuable tips on technically correct parts washing.
+
naturalThe BIO-CIRCLE benefits from the powers of nature in order to provide for us-er-friendly, ecofriendly, and economical parts washing. They clean without any solvents or cold cleaners, thus protecting the employee and the environment from highly volatile vapours. The ph-adjusted cleaning medium BIO-CIRCLE L dissolves processing oils, cutting coolants, anti-corrosion products, light greases and similar contaminations as well as particle contaminations from the parts. The easy-to-clean filter system separates coarse and fine contaminations, and the natural micro-organisms biodegrade the greases and oils, thus maintaining the cleaning performance.
simpleThe BIO-CIRCLE Liquids are ready for use, which eliminates the risk of incorrect dilution and variations in quality, and the necessity of regular bath analyses. The aqueous BIO-CIRCLE Liquids do not pit the surfaces; all materials from plastics to steel can be cleaned.
profitableBIO-CIRCLE Liquid features a bath lifetime that is up to four times as long as with cold cleaners. Even with a higher contamination input a constantly good cleaning result is achieved. BIO-CIRCLE Liquid means no hazard to humans and the environ-ment, paired with high efficiency and cost effectiveness.
* The used micro-organism are non-pathogen bacteria of group 1 acc. to Directive 2000/54/EC.
(Group 1 means that it is unlikely to cause human disease).
Dermatologically tested!
NEW:Four high-performance BIO-CIRCLE Liquids guarantee optimum results in parts washing.
free!VOC
Liquid
99
A02026 20 L jerrycanA20026 200 L drum A10026 1000 L IBC
A02098 20 L jerrycanA20098 200 L drum A10098 1000 L IBC
BIO-CIRCLE Liquid optimally adjusted to everyday soiling compatible with oil separators – tested in accordance
with ÖNORM B5105 fresh scent – also neutralizes unpleasant smells
caused by ingress of soiling special corrosion inhibitors guarantee temporary
protection after cleaning NSF certified improved skin protection through panthenol skin-friendliness has been dermatologically tested surfactants on the basis of renewable resource
BIO-CIRCLE Liquid Ultra removes even heavy oils and greases improved cleaning performance especially for tenacious soiling also suited for removing bitumen and
corrosion-preventive waxes fresh scent – also neutralizes unpleasant smells caused
by ingress of soiling special corrosion inhibitors guarantee temporary protection
after cleaning
Optimized formula!
Optimized formula!
A02099 20 L jerrycanA20099 200 L drum A10099 1000 L IBC
A02082 20 L jerrycanA20082 200 L drum A10082 1000 L IBC
BIO-CIRCLE Liquid Alu for the cleaning of sensitive materials, such as aluminium virtually residue-free without scent – can be added as required NSF certification pending surfactants on the basis of renewable resources
BIO-CIRCLE Liquid Turbo low foaming for mechanical cleaning in the
BIO-CIRCLE Turbo for temperatures of up to 50 °C with corrosion protection
CLEANING CONSISTENCY
CONSTANCE DU NETTOYAGE
10 BIO-CIRCLE
BIO-CIRCLE accessories
Brushes (flooded with cleaning agent solution)
G28526 Washing brush, angled Supports cleaning in angular and hard-to-reach corners.
G20726 Washing brush Supports cleaning
G27326 Washing brush with soft bristles (nylon 0.3 mm) With this washing brush sensitive parts can be cleaned without harming the material.
Hose
G29126 Liquid hose for BIO-CIRCLE, sold by the metre, 8 mm interior The feed line to the washing brush can be extended for big parts.
Filters Inserts for filter casings (nylon filter, washable; Wound cartridge filter, non-washable)G22026 Nylon filter support core
Holds the replaceable nylon filterG28326 Nylon filter 100 μm, blue G28726 Nylon filter 150 μm, brownG28426 Nylon filter 200 μm, greenG21926 Nylon filter 350 μm, grey G22726 Wound cartridge filter 100 μm
Trading unit: 6 pieces
G22826 Wound cartridge filter 200 μm Trading
unit: 6 pieces
Foot switch For comfortable and easy handling. The washing process is initiated by means of a foot switch.G26126 Foot switch (electro-pneumatic) Floating spheres (polypropylene)To reduce evaporation losses They are afloat on the cleaner surface.G27726 1000 g in a 10 L pail
Tube cleaning nozzles (Application in all BIO-CIRCLE units)For uniform wetting, rinsing, and cleaning of inte-rior tube surfaces.G21226 approx. 600 mm with hose attachment
G21326 approx. 600 mm with quick-action coupling
G21426 approx. 800 mm with brush head
and hose attachment
G21526 approx. 800 mm with brush head
and quick-action coupling
Pumps BC pump for 230 V
G29826 Pump with increased flow rate. Recommended with extended liquid hose. 170 W
G27926 Pump for acidic media With this pump and an acidic cleaner (e.g. bio-chem Power Cleaner) in the BIO-CIRCLE you can derust and/or descale parts, or remove other mineral contaminations from the parts. 45 W
Filter accessoriesFor Mini, Compact and Maxi.G54126 Opening key for filter casings Filter bagsThe filter bags are fastened under the basin discharge by means of a bracket. G54626 Filter bag nylon 50 µm washableG54726 Filter bag nylon 100 µm washable G54426 Filter bag polypropylene needle felting 5 µmG54526 Filter bag polypropylene needle felting 25 µm G54826 Add-on bracket for filter bags on
Compact and Maxi, with 3 screws
BIO-CIRCLE – general
1111
BIO-CIRCLE Mini
BIO-CIRCLE Turbo
Lid Protects from pollution and reduces evaporation of the cleaning liquid.G552039 for Mini Inox protection gridMade from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts.G70326 for Mini
Lid Protects from pollution and reduces evaporation of the cleaning liquid.G5520323 for Maxi Inox protection gridMade from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts.G60226 for Maxi TrolleyThe sturdy trolley makes the device mobile and hence versatile.G60326 for Maxi
galvanized (W 1000 x D 1000 x H 200 mm)
BIO-CIRCLE Compact
BIO-CIRCLE Maxi
Advice:The corrosion protection provided does not meet the requirements of your application? The bio-chem corrosion protection for aqueous systems is the solution. It can be added to the BIO-CIRCLE parts washers at any time. Contains 100 % active ingredients Very economical – a low application concentration is sufficient Nitrite-free
Corrosion protection for aqueous systems
A00111 1000 ml plastic bottle Packaging unit: 12 x 1000 ml (1 cardboard box)
A01011 10 L jerrycanA03011 30 L jerrycanA12011 120 L drum
Lid Protects from pollution and reduces evaporation of the cleaning liquid.G55B028 for Compact Inox protection gridMade from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts.G53226 for Compact
TrolleyThe sturdy trolley makes the device mobile and hence versatile.G53126 for Compact
galvanized (W 766 x D 522 x H 140 mm) Gloves
G42207 Gloves size 11
12 BIO-CIRCLE
Bio-Circle Surface Technology GmbHBio-Circle Surface Technology GmbHBerensweg 200D-33334 GüterslohTelefon: +49 (0)5241 9443-0Telefax: +49 (0)5241 9443-44
E-Mail: [email protected]
We put the BIO-CIRCLE parts cleaner into motion – and it comes directly to your door. Get an idea on site and assure yourself of the functionality, and its excellent cleaning performance paired with best possible user- and envi-ronmental protection. Examine the high-quality workmanship and optimized ease of use, and compare your demands on a parts cleaner with integrated brush to the BIO-CIRCLE system. Experience the BIO-CIRCLE at first hand during an application test on your premises. Rent-a-BIO-CIRCLE? You can also rent BIO-CIRCLE.For more detailed information on renting conditions please call the number below.
Are you interested? We’ll be happy to make an appointment with you.
Telephone: +49 (0)5241 9443-0
E-mail: [email protected]
Our BIO-CIRCLE systems distinguish themselves for the following: excellent cleaning performance thanks to an optimum combi-
nation of mechanics, temperature, chemistry and nature
no solvents, no cold cleaners
no fire hazard – aqueous cleaning medium
no hazardous substance, no hazardous material, hence no spe-cial regulations regarding storage, handling, and transportation
cleaned parts are protected from corrosion
long service life because of biological oil degradation
White Biotechnology squares human economic management with the natural cycles of materials. There are plenty of prod-ucts the application of which helps improve our quality of life. The BIO-CIRCLE is a representative example of the success story of White Biotechnology.www.weisse-biotechnologie.net
BIO-CIRCLE on the road
Comparison between a conventional parts cleaner with cold cleaner and BIO-CIRCLE
What happens in case of increased pollution input?
What contaminations can be removed? Organic, unpolar (greases, oils) Inorganic, polar (salts) Inorganic, unpolar (chippings, dust)
What materials can be cleaned? Stainless steelSteel Aluminium Non-ferrous metals
Occupational safety and health
Saturation of the rinsing solution Deterioration of cleaning performance
Excellent Modest Modest
ExcellentExcellentExcellentExcellent
Results remain the same over the entire period
Excellent Excellent Good
ExcellentExcellentExcellentExcellent
Parts cleaner with cold cleaner
BIO-CIRCLEBIO-CIRCLE L
Nerve damage
Skin damage
Liver damage
Kidney damage
Blood cell damage
Mutagenic and fecundity-endangering effects
Carcinogenic effects
Toluene, xylene, trichloroethylene, n-hexane, petroleum ethers (hexanal isomers, pentane, heptane, octane) Yes
Methylene chloride, trichloroeth-ylene, toluene, xylene, methanol, ethanol
Trichloroethylene, petroleum, fuel mixtures, hexane, heptane, toluene, xylene, alcohols
Toluene, benzene
Organic solvents
Benzene
Parts cleaner with cold cleaner
BIO-CIRCLEBIO-CIRCLE L
None
None
None
None
None
None
None
Impairments to health(Source: Gefahrstoffe Kaltreiniger, M043, 02/2007, BG Chemie))