OPR

Combining efficient LED light sources with advanced optic technology, Hella marine LED products deliver more light output per watt than traditional bulb lamps and thus provide considerable power saving. Hella marine NaviLED®PRO lamps use less than 10% of the power required to run a 25W incandescent bulb lamp certified to the same visible distance.

Hella marine LED technology has no filaments to break, making the lamps extremely shock and vibration resistant for reliable illumination and safety. Advanced optics deliver optimal horizontal and vertical light according to international standards. They provide enhanced visibility compared to bulb lamps. Cut-off angles are ultra precise, clearly indicating a vessel’s movement and heading.

Each lamp is a completely sealed unit. Proven design, precision engineering, and the use of high impact acrylic materials ensures superior resistance to water, impact, UV and wear and tear.Hella marine LED lamps are also pre-wired with quality marine cable sealed to the lamp body for time saving installations and reliable electrical connection.

Advanced MultivoltTM circuitry provides reliable illumination across a range of DC inputs such as 8-28 volts or 9-33 volts. MultivoltTM LED lamps can be connected to 12 or 24 volt systems providing full light performance even during low battery voltages and voltage drop over long cable runs and connectors.

• Completely sealed

• Ultra low power consumption

• UV, corrosion and impact resistant

• Pre-wired with twin core marine cable

• MultivoltTM 9-33V DC

• Reverse polarity and spike protected

• Ultra secure and time saving installation

• Internationally approved

• Yacht and powerboat certified

Ultra reliable 2 and 3 nautical mile LED Port, Starboard, Stern and Masthead lamps.

• Completely sealed

• Ultra low power consumption

• UV, corrosion and impact resistant

• Pre-wired with marine cable

• MultivoltTM 8-28V DC

• Reverse polarity and spike protected

• Secure and time saving installation

• Internationally approved

• Yacht and powerboat certified

Attractive and compact 2 nautical mile LED Port, Starboard and Stern lamps.

• Completely sealed

• Ultra low power consumption

• UV, corrosion and impact resistant

• Pre-wired with marine cable

• MultivoltTM 9-33V DC

• Reverse polarity and spike protected

• Internationally approved

• Wide range of installation options

Power saving 2 nautical mile LED Anchor and All Round lamps.

Designed and manufactured in New Zealand and proven worldwide, Hella marine LED navigation lamps provide power saving, highly visible and ultra durable lighting for reliability and safety at sea.

RINA

IMOCOL REG 72

A-16ABYC

USCG

BSH

RINA

IMOCOL REG 72

A-16ABYC

USCG

BSH

RINA

IMOCOL REG 72

A-16ABYC

USCG

BSH

• UV resistant

• Impact resistant materials

• Low power consumption

• Completely sealed

• Pre-wired with marine cable

• MultivoltTM 9-30V DC

• Reverse polarity and spike

protected

Ultra reliable LED technology enabled the design of a compact marine floodlight suitable for applications subject to high vibration, impact and shock loads all in a completely sealed, waterproof housing.

Advanced Hella marine Free-Form reflectors and LED technology combine to provide intense white light for close range homogeneous illumination.

Very low power consumption, less then 20% of the energy required to operate a 55W H3 halogen floodlight, thus providing substantial power savings onboard.

Supplied with stainless steel mounting hardware and pre-wired with 2m of marine cable, each lamp is a completely sealed ‘fit and forget’ unit.

The LED Floodlight series are power saving, completely sealed floodlights providing all the reliability advantages of

Hella marine LED technology.

LED Floodlights LED Task Lamps

Power consumption is low at less than 3W, (<0.25A@12V / <0.13A@24V) yet Sea Hawk lamps offer 240 lumens of crisp white light.Manufactured in New Zealand from advanced marine grade materials, Sea Hawk lamps utilise a high performance Grilamid® Polyamide lens for superior strength and resistance to impact and UV. The housing is a tough, proven, high impact plastic offering outstanding UV resistance. The mounting bracket is highly polished 316 marine grade stainless steel. 2.5m of tinned ‘twin core’ marine cable is sealed and pre-wired into each lamp for absolute water tightness and reliable electrical connections. Integrated MultivoltTM electronics provide protection from reverse polarity, voltage spikes and low battery voltages and ensure reliable operation at full brightness across a range of input voltages from 9-33V DC. Hella marine precision optics provide two light pattern options for this series. Spread lamps are suited for illuminating cockpits and transom areas with a close range, wide spread of light. Spot lamps offer a narrower and more concentrated light pattern for applications such as spreader lighting on a yacht’s mast. The low profile 316 stainless mounting bracket secures the lamp body from both sides and allows easy adjustment of the vertical light beam angle. Effective retention in the innovative fastening design will hold the lamp steady at the varying angles without the need to adjust fastenings.Hella marine Sea Hawk series lamps represent the latest in energy efficiency and maintenance free ‘fit and forget’ technology.

Completely sealed and weighing a mere 250 grams (including cable), Sea Hawk LED lamps are a brand new class of energy saving, compact, lightweight, and ultra durable luminaires that can be installed almost anywhere onboard, interior or exterior.

Deck Floodlights / Underwater

Hella marine ‘Sea Vision’ products are designed and manufactured by Underwater Lights USA, a market leading specialist supplier of underwater and exterior lighting systems to the world’s super yacht industry.

Underwater Lighting

Purpose designed for permanent submersion below the waterline, Hella marine Sea Vision lights provide class leading luminous intensity and attractive ambient colours, whether the goal be attracting bait fish or enhancing a vessel in a pool of light whilst at anchor.

LED Navigation Lamps LED Interior Lighting LED Deck Floodlights LED Utility Lighting

The Hella marine vision is to provide world leading marine lighting products that set benchmarks for quality, reliability, safety and energy efficiency and to meet customer expectations for outstanding service and support.

Light up your life

LED Courtesy Lighting

At sea, power is often a scarce resource. Highly efficient LED lighting has a substantial role to play in conserving energy and enhancing a vessel without sacrificing functionality or compromising safety.

Hella marine ‘fit and forget’ LED lighting is firmly established as the solution of choice that meets long term reliability and economic considerations for astute owners and operators.

S-H

MB

RO

INT0

2

www.hellamarine.comwww.hellamarine.comwww.hellamarine.com

Certified LED Navigation Lamps

Designed and manufactured in New Zealand and consuming less than 0.8W per lamp (<0.07A@12V / <0.03A@24V), Hella marine Rakino and Tiri series LED downlights feature industry leading efficiency. The lamps also run very cool due to their low current draw to provide substantial power saving benefits compared to incandescent lighting. Both series offer a viable alternative to 10W incandescent lamps.Advanced Hella marine lens and optic designs provide intense light without glare or eye strain. Two beam angle options are available, a 15° Spot or 32° Spread beam.

The Spot lamp (Peak light angle at 15°) is ideal for installations where the first surface requiring illumination is 1 metre or more from the lamp. Spread lamps (Peak light angle at 32°) are ideal for softer light where the first surface to be illuminated is less than 1 metre from the lamp.Each lamp is completely sealed and can thus be installed almost anywhere on board, interior or exterior, wet or dry. The ultra low heat signature will not cause damage to surrounding materials.

Available in 12V or 24V DC versions, these LED lamps can be dimmed and controlled with the Hella marine 2 Group Light Dimmer for ambient lighting effects.

Hella marine LED downlights represent the class leading energy efficiency and maintenance free ‘fit and forget’ technology.

Compact LED downlights offering class leading efficiency and durability

LED Downlights

• < 0.8W power consumption

• Completely sealed

• Pre-wired with marine cable

• UV resistant

• Impact resistant materials

• 12V DC or 24V DC

• Stainless steel screws

included

Power consumption is very low at less than 2.0W (<0.17A@12V / <0.08A@24V) offering substantial energy saving compared to incandescent lighting. The surface temperature is very cool due to their low current draw.

Three different housing designs are available, ideal for direct or indirect illumination duties. The attractive polished 316 marine grade stainless steel bezel version offers many innovative design possibilities while the wide rim and ultra narrow lamps can be integrated into different shapes and spaces on board. All Waiheke series lamps provide comfortable colour temperatures in white and warm white with excellent colour rendering performance.

The light colour matches an equivalent Hella marine Rakino series LED downlight for consistent illumination and coordinated ambience throughout a vessel. 500mm of marine tinned ‘twin core’ cable is pre-wired and sealed into each lamp for absolute water tightness and reliable electrical connections. Hella marine Waiheke series lamps represent the latest in class leading energy efficiency and maintenance free ‘fit and forget’ technology.

Hella marine Waiheke series LED lamps are completely sealed energy saving devices suitable for a wide variety of lighting applications, from interior downlighting to cockpit illumination.

LED Strip Lamps

• Completely sealed

• < 0.5W power consumption

• UV and impact resistant acrylic

• Pre-wired with marine cable

• MultivoltTM and single voltage options

• Step lamps with 30 degree

down angle optics

• Stainless steel rim options

• Recess mount

• Completely sealed

• < 0.5W power consumption

• 13mm mounting depth

• Recess or surface mount

• UV and impact resistant

• Pre-wired with marine cable

• 12V or 24V DC

• Enhanced brightness white or

warm white options

• Stainless steel rim options

Designed and manufactured in New Zealand, EuroLED® lamps provide reliable and power saving lighting for a range of interior and exterior applications.

Advanced EuroLED®Touch versions use the latest completely sealed touch sensitive technology to make lighting control beautifully simple. Touch the colour pad for red or blue light, the white pad for white light. On the dual colour versions, hold your finger on the pad for more than two seconds and the lamp will cycle through dimming levels. Release your finger on the light level required.

Dual colour EuroLED®Touch lamps can also be remotely operated and synchronised with common momentary switches. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the colour intensity previously set, regardless of power interruption.EuroLED®Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) for significant power savings.

Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.

Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life and suitable for a variety of recreational and commercial applications.

Rim Finish

LED Light Colour

EuroLED®Touch lamps with on/off switching, dimmable and remote momentary switch control. Also available with

dual colour options

EuroLED® lamps without touch control, available in white or warm white.

• Completely sealed

• UV and impact resistant

• Pre-wired

• 12V or 24V DC

• < 2W power consumption

Slim Line LED Courtesy Lamps

Easy Fit LED Courtesy Lamps

• Completely sealed

• UV and impact resistant acrylic

• Pre-wired with marine cable

• MultivoltTM 12-24V DC

• < 0.5W power consumption

• Recess mount into 25mm hole

LED Courtesy Strip Lamps

LED Courtesy and Step Lighting

Ultra durable and power saving LED strip lighting.Recess or surface mount models.

Ultra compact, power saving and attractive LED lamps for a wide variety of interior and exterior lighting applications.

Stylish, compact and power saving Hella marine LED courtesy and step lamps.

Attractive, power saving and completely sealed LED lighting for enhancing interiors and exteriors.

Rim Finish

LED Light Colour

Rim Finish

LED Light Colour

Advanced LED lamps with touch sensitive switching.Power saving and ultra durable.

DuraLed® lamps provide powerful white light and a safe, energy efficient and reliable alternative to incandescent and fluorescent lighting. Purposely designed for engine rooms, storage lockers, lazarettes and many heavy duty applications where reliability must not be compromised. Advanced Hella marine lens and optic engineering ensures an ultra wide spread of light without glare or harsh point sources. The range offers three peak intensity levels, all with a very wide spread of light. Product reliability is second to none, proven worldwide in thousands of highly demanding applications. Each lamp is completely sealed, impact resistant and shock resistant, ensuring an ultra long service life. Each lamp is pre-wired with twin core marine cable for time saving and completely sealed electrical connections.Hella marine MultivoltTM circuitry provides constant illumination and circuit protection

from 9-33V DC, even under severe voltage fluctuations. Spike protection, reverse polarity protection and over voltage protection are all built-in benefits of the sophisticated electronics inside each lamp.DuraLed® lamps carry ISO Ignition Protection approvals for safe and certified installations when lamps are located near flammable gas sources such as machinery spaces, tender garages and fuel storage areas.DuraLed® lamps are surface mounted and feature a unique installation system where the fastening load is taken up by a heavy duty nylon bush to eliminate possible stress on the lamp housing.

Heavy duty marine lamps. Outstanding light intensity, class leading efficiency and proven durability

Interior or Exterior LED LightingInterior or Exterior LED Lighting

Recessed Surface Mount

Recessed Surface Mount

Timeless quality brass housings and highly energy efficient Hella marine LED technology combine to offer a range of attractive and safe ‘cool to touch’ LED reading lamps.

• < 0.8W power consumption

• 12V DC or 24V DC

• 5000K (White) / 3000K (Warm White)

• Brass housing

• Bright Chrome, Satin Nickle Chrome or Gold Plated

• Dimmed via Hella marine 2 Group Dimmer 5XA 998 572-001

• Cool operating temperature and safe to touch

LED Reading Lamps

Surface finish options include bright chrome, satin nickle chrome or gold plated brass. The brass arm and knuckle offers adjustable swing and pitch to achieve optimum light angles. Each light engine is a completely sealed unit, pre-wired with tinned marine cable.

Rim Finish

LED Light Colour

www.hellamarine.comwww.hellamarine.com www.hellamarine.com

Attractive LED Courtesy Lighting