2010 Firmware Upgrade Instruction for PDP T-VALAUSC
-
Upload
litow-cuebo -
Category
Documents
-
view
223 -
download
1
Transcript of 2010 Firmware Upgrade Instruction for PDP T-VALAUSC
-
7/22/2019 2010 Firmware Upgrade Instruction for PDP T-VALAUSC
1/4
-
7/22/2019 2010 Firmware Upgrade Instruction for PDP T-VALAUSC
2/4
Model List
PDP TV
6 series :
PN50C6400TF, PN58C6400TF,
PN50C6500TF, PN58C6500TF
7 series :
PN50C7000YF, PN58C7000YF, PN63C7000YF
8 series :
PN50C8000YF, PN58C8000YF, PN63C8000YF
-
7/22/2019 2010 Firmware Upgrade Instruction for PDP T-VALAUSC
3/4
Step1. How to prepare the USB Memory Drive
2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file onto the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file.
1. Save the firmware file onto your computer.
File Name : T-VALAUSC.exe
4. Click on the Unzipbutton. 5. Unzipping is in progress.
6. After completing, click on the
OKand Closebuttons.
7. A folder containing the firmware files
has been added to the USB memory drive.
Folder name : T-VALAUSC
8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
Safely Remove.
OK
-
7/22/2019 2010 Firmware Upgrade Instruction for PDP T-VALAUSC
4/4
[Step 1] Turn the TV on
[Step 2] Insert the USB Memory Drive
containing the Software into the USB1
or 2 port on the side of the TV
[Step 3] Press the or buttonon Remote to select Software Upgrade,
then press the ENTER button [Step 6] When the Software upgradeis complete; the TV will turn off and
then back on by itself.
[Step 4] The message Scanning for USB.
This may take more 1 min. is displayed.
And then software is upgradedautomatically.
[Step 5] The message below is displayed.Select OK, then press the ENTER
button.
If Software Upgrade is not activated,
please wait for 1~2 minutes. [Step 7] The TV runs System
Optimizing then it will turn off and
then back on by itself.
Step2. How to upgrade the firmware