• IN-TANK CHECK VALVE

• IN-LINE CHECK VALVE

• BRONZE CHECK VALVE

• UNLOADER PILOT VALVE

• PILOTED UNLOADER VALVE

• COMBINATION PILOTED

DISCHARGE & CHECK VALVE

e

• BULLWHIP THROTTLE CONTROL

• AIRLINE THROTTLE CONTROL

• SAFETY VALVE

• AIR ACTUATED DISCHARGE

• SMART START

• AUTOMATIC DRAIN VALVE

• REPAIR KITS

Conrader Controls Compressors

PH: 814-898-2727

WWW.CONRADE

2008-2009 Price Guid

FXR.COM

: 814-898-3512

Inlet Outlet Part Number Price 3/8” 3/8” CTC3838 $7.69 5/16” 1/2" CTC51612 $8.60 3/8” 1/2" CTC3812 $8.60 1/2" 1/2" CTC1212 $8.60 ½” 3/4" CTC1234 $11.93 3/4" 1/2" CTC3412 $11.93 3/4" 3/4" CTC3434 $11.93 3/4" 1” CTC341 $16.13

Inlet Outlet Part Number Price 3/8” 3/8” CTD3838 $8.65 5/16” 1/2" CTD51612 $9.57 3/8” 1/2" CTD3812 $9.57 1/2" 1/2" CTD1212 $9.57 1/2" 3/4" CTD1234 $12.58 3/4" 1/2" CTD3412 $12.58 3/4" 3/4" CTD3434 $12.58 3/4" 1” CTD341 $17.18

Inlet Outlet Part Number Price 3/8” 1/2" CAC3812-NF $9.89 3/8” 1/2" CAC3812-SU3-T $10.43 1/2" 1/2" CAC1212 $10.21

Inlet Outlet Part Number Price 1/2" 1/2" CTF1212 $12.63 5/8” 1/2" CTF5812 $14.24 5/8” 3/4" CTF5834 $15.86 3/4" 3/4" CTF3434 $15.86 Inlet Outlet Part Number Price 1/2" 1/2" CTG1212 $10.97 3/4" 3/4" CTG3434 $15.80 5/8” 3/4" CTG5834 $15.80 5/8” 3/4" CTG5834-12 $15.80

Inlet Outlet Part Number Price 1/4" 1/2" CTA1412 $7.53 3/8” 1/2" CTA3812 $7.53 1/2" 1/2" CTA1212 $8.60 1/2" 3/4" CTA1234 $11.61 1/2" 1” CTA121 $16.13 3/4" 3/4" CTA3434 $11.93 3/4" 1” CTA341 $16.13 3/4" 1 ½” CTA34112 $81.70 3/4" 1 ½-1” CTA34112-1 $81.70 1” 1” CTA11 $21.39 1” 1 ¼” CTA1114 $44.62 1 ¼” 1 ¼” CTA114114 $44.62 1 ½” 1 ½” CTA112112 $75.25

Inlet Outlet Part Number Price 1/4" 1/2" CTB1412 $8.28 3/8” 1/2" CTB3812 $8.28 1/2" 1/2" CTB1212 $9.57 1/2" 3/4" CTB1234 $12.151/2" 1” CTB121 $16.883/4" 3/4" CTB3434 $13.653/4" 1” CTB341 $17.183/4" 1 ½” CTB34112 $86.001” 1” CTB11 $22.751” 1 ¼” CTB1114 $41.781 ¼” 1 ¼” CTB114114 $41.781 ½” 1 ½” CTB112112 $77.40

CHECK VALVES: IN-TANK CTA Inlet: Female Pipe Outlet: NPT, no unloader port on hex

CTD Inlet: Compression Fitting Outlet: NPT, w/1/8” unloader port

CAC Inlet: Compression Fitting Outlet: NPT, w/1/8” unloader port on hex 120° from inlet

CTC Inlet: Compression Fitting Outlet: NPT, no unloader port on hex

CTG Inlet: Inverted Flare Inlet Outlet: NPT, (2) 1/8” unloader ports, one with inverted flare

CTF Inlet: JIC Flare Inlet Outlet: NPT, 1/8” unloader port

CTB Inlet: Female Pipe Outlet: NPT, 1/8” unloader port

CHECK VALVES: IN-LINE

CLA Inlet: Female NPT Outlet: Female NPT, no unloader port

CLB Inlet: Female NPT Outlet: Female NPT, with 1/8” unloader port

Inlet Outlet Part Number Price 1/4" 1/4" CLA14 $11.83 3/8” 3/8” CLA38 $13.33 1/2" 1/2" CLA12 $16.77 3/4" 3/4" CLA34 $21.72 1” 1 CLA1 $45.90 1 1/2” 1 1/2 CLA112 $126.85

Inlet Outlet Part Number Price

1/4" 1/4" CLC14 $14.46

Inlet Part Number SCF1/8” GV18 12 1/4" GV14 12 3/8” GV38 22 1/2" GV12 38 3/4" GV34 60 1” GV1 1151-1/4” GV114 1601/1/2” GV112 1602” GV2 220

CLC14 Inlet: female NPT Outlet: Male NPT Control line check valve

Thread Sealant $1.14

P1: Extra 1/8P2: Extra 1/4

BRONZE CHECK

GV Max PressMax Tem

Inlet Outlet Part Number Price 1/4" 1/4" CLB14 $13.33 3/8” 3/8” CLB38 $14.84 1/2" 1/2" CLB12 $18.17 3/4" 3/4" CLB34 $24.19 1” 1’ CLB1 $48.03 1 ½” 1 ½” CLB112 $132.23

M

SU3-$4.10

” Port $1” Port $1

VAL

ure: 250perature:

Check Valve Options

Start Unloader

.60 .60

VES

Price $15.25 $15.57 $18.62 $24.08 $31.02 $67.23 $99.84 $107.00 $169.52

PSI 450°

PILOTED UNLOADER VALVES

UNLOADER PILOT VALVES

RCB RCT RCL RCL-S

Outlet Pressure Range Other Features Price Female 1/8” Female 20-250 psi Replaceable inlet filter $26.60Male 1/8” Female 20-250 psi Replaceable inlet filter $26.60Female 1/8” Female 20-250 psi 3/8” mounting boss opposite outlet $32.20Female 1/4" Female 20-1200 psi Replaceable inlet filter $56.00Female 1/4" Female 20-1200 psi Removable side mounted strainer $69.00

UNLOADER PILOT OPTIONS

nd er

$2.40 $4.60

CP-Clean Out Port for RCL-S $16.30

DC-Dual Control RCB $6.40 RCL $9.90

SA-Sealed Adjustment $6.00

Inlet

Outlet

Plain Stem

P/N InletRCB 1/4" RCB-M 1/4" RCT 1/4" RCL 3/8” RCL-S 3/8”

HU-HaUnloadRCB RCL

Plain Stem

P

PILOTED UNLOADER OPTIONS

Discharge Inlet ilot Inlet

Vent

Dual Control

Hand Unloader

M-Felt Muffler (for models 1 & 2) $2.60

SA- Sealed Adjustment $6.00

Throttle Port

P/N Discharge Inlet Pilot Inlet Vent Stem SCFM Price B1 1/4" Compression 1/4” Male Direct Unported Plain Stem 20 $40.80 B2 1/4" Female 1/4” Male Direct Unported Plain Stem 20 $40.80 B3 1/4" Compression 1/4” Male 1/4" Female Plain Stem 20 $45.00 B4 1/4" Female 1/4” Male 1/4" Female Plain Stem 20 $45.00 BE1 1/4" Compression 1/4” Male Direct Unported Dual Control 20 $46.20 BE2 1/4" Female 1/4” Male Direct Unported Dual Control 20 $46.20 BE3 1/4" Compression 1/4” Male 1/4" Female Dual Control 20 $50.20 BE4 1/4" Female 1/4” Male 1/4" Female Dual Control 20 $50.20 BG1 1/4" Compression 1/4” Male Direct Unported Hand Unloader 20 $46.20 BG2 1/4" Female 1/4” Male Direct Unported Hand Unloader 20 $46.20 BG3 1/4" Compression 1/4” Male 1/4" Female Hand Unloader 20 $50.20 BG4 1/4" Female 1/4” Male 1/4" Female Hand Unloader 20 $50.20 BL 1/2" Female 1/4" Female 1/2" Female Plain Stem 60 $79.68 BLE 1/2" Female 1/4" Female 1/2" Female Dual Control 60 $86.48 BLG 1/2" Female 1/4" Female 1/2" Female Hand Unloader 60 $86.48

NS Plain Stem

DP

t

NS-SERIES PILOTED DISCHARGE CHECK VALVES

Top Inle

ischarge ort

NSG Hand Unloader

NSDC Dual Control

*Olocthro

Outlet Fitting

SU3- Start Unloader Installed

$4.10

SA- SeaAdjustm

$6.00

Throttle Port

ptional side inlet ated 180° from ttle port

Inlet Outlet SCFM P/N Price P/N Price P/N Price 1/2" Female Top 1/2" Female 18 NS-1 $55.60 NSDC-1 $62.20 NSG-1 $58.20 1/2" Female Side 1/2" Female 18 NS-2 $55.60 NSDC-2 $62.20 NSG-2 $58.20 1/2" Compression Top 1/2" Female 18 NS-3 $55.60 NSDC-3 $62.20 NSG-3 $58.20 1/2" Compression Side 1/2" Female 18 NS-4 $55.60 NSDC-4 $62.20 NSG-4 $58.20 1/2" Female Top 1/2" Male 18 NS-5 $55.60 NSDC-5 $62.20 NSG-5 $58.20 1/2" Female Side 1/2" Male 18 NS-6 $55.60 NSDC-6 $62.20 NSG-6 $58.20 1/2" Compression Top 1/2" Male 18 NS-7 $55.60 NSDC-7 $62.20 NSG-7 $58.20 1/2" Compression Side 1/2" Male 18 NS-8 $55.60 NSDC-8 $62.20 NSG-8 $58.20 3/8” Female Top 1/2" Female 18 NS-9 $55.60 NSDC-9 $62.20 NSG-9 $58.20 3/8” Female Side 1/2" Female 18 NS-10 $55.60 NSDC-10 $62.20 NSG-10 $58.20 3/8” Compression Top 1/2" Female 18 NS-11 $55.60 NSDC-11 $62.20 NSG-11 $58.20 3/8” Compression Side 1/2" Female 18 NS-12 $55.60 NSDC-12 $62.20 NSG-12 $58.20 3/8” Female Top 1/2" Male 18 NS-13 $55.60 NSDC-13 $62.20 NSG-13 $58.20 3/8” Female Side 1/2" Male 18 NS-14 $55.60 NSDC-14 $62.20 NSG-14 $58.20 3/8” Compression Top 1/2" Male 18 NS-15 $55.60 NSDC-15 $62.20 NSG-15 $58.20 3/8” Compression Side 1/2" Male 18 NS-16 $55.60 NSDC-16 $62.20 NSG-16 $58.20

Other Available Fittings Inlet: ¼” FNPT, ¼” MNPT, 3/8” MNPT, 3/8” FNPT, 3/8” Compression ADD $1.00 TO LIST

Outlet: 3/8” FNPT, 3/8” MNPT, 1/4” FNPT

led ent

SS- Sealed Male Threads $1.14

NS-SERIES OPTIONS

P1- 1/8” ported cap $1.60 P2- ¼” ported cap $1.60

ADD $1.00 TO LIST

M-Installed Muffler $4.10

N-SERIES PILOTED DISCHARGE CHECK VALVES

Optional Side or Top Inlet

ADD $2.00 TO LIST

SU3- Start Unloader Installed

$4.10

SA- Sealed Adjustment

$6.00

SS- SeaThr$1

N-SE

NG N Plain Stem

NDC

Discharge Port

t

Pilot Port

Hand Unloader Dual Control

Inlet Outlet SCFM P/N Price P/N Price P/N Price 1/2" Female Top 1/2" Female 30 N-1 $65.30 NDC-1 $72.70 NG-1 $67.40 1/2" Female Side 1/2" Female 30 N-2 $65.30 NDC-2 $72.70 NG-2 $67.40 1/2" Compression Top 1/2" Female 30 N-3 $65.30 NDC-3 $72.70 NG-3 $67.40 1/2" Compression Side 1/2" Female 30 N-4 $65.30 NDC-4 $72.70 NG-4 $67.40 1/2" Female Top 1/2" Male 30 N-5 $65.30 NDC-5 $72.70 NG-5 $67.40 1/2" Female Side 1/2" Male 30 N-6 $65.30 NDC-6 $72.70 NG-6 $67.40 1/2" Compression Top 1/2" Male 30 N-7 $65.30 NDC-7 $72.70 NG-7 $67.40 1/2" Compression Side 1/2" Male 30 N-8 $65.30 NDC-8 $72.70 NG-8 $67.40 5/8” Compression Top 1/2" Female 30 N-9 $65.30 NDC-9 $72.70 NG-9 $67.40 5/8” Compression Side 1/2" Female 30 N-10 $65.30 NDC-10 $72.70 NG-10 $67.40 5/8” Compression Top 1/2" Male 30 N-11 $65.30 NDC-11 $72.70 NG-11 $67.40 5/8” Compression Side 1/2" Male 30 N-12 $65.30 NDC-12 $72.70 NG-12 $67.40 5/8” Inverted Flare Top 1/2" Female 30 N-13 $65.30 NDC-13 $72.70 NG-13 $67.40 5/8” Inverted Flare Side 1/2" Female 30 N-14 $65.30 NDC-14 $72.70 NG-14 $67.40 5/8” Inverted Flare Top 1/2" Male 30 N-15 $65.30 NDC-15 $72.70 NG-15 $67.40 5/8” Inverted Flare Side 1/2" Male 30 N-16 $65.30 NDC-16 $72.70 NG-16 $67.40 3/4" Compression Top 1/2" Female 30 N-17 $65.30 NDC-17 $72.70 NG-17 $67.40 3/4" Compression Side 1/2" Female 30 N-18 $65.30 NDC-18 $72.70 NG-18 $67.40 3/4" Compression Top 1/2" Male 30 N-19 $65.30 NDC-19 $72.70 NG-19 $67.40 3/4" Compression Side 1/2" Male 30 N-20 $65.30 NDC-20 $72.70 NG-20 $67.40 Other Available Fittings Inlet: ¼” FNPT, ¼” MNPT, 3/8” MNPT, 3/8” Compression, 1/2” Flare, ¾” MNPT, ¾” FNPT

ADD $2.00 TO LIST Outlet: 1/4” FNPT, 3/8” FNPT, 3/8” MNPT, ¾” MNPT, ¾” FNPT

Outle

led Male eads .14

RIES OPTIONS

M- Installed Muffler $6.60

P1- 1/8” ported cap $1.60 P2- ¼” ported cap $1.60

NL-SERIES PILOTED DISCHARGE CHECK VALVES

NLDC Dual Control

NL Plain Stem

Inlet

NLG Hand Unloader Throttle Port

Inlet Outlet 3/4" Female 3/4” Fe3/4" Compression 3/4" Fe3/4"” Inverted Flare 3/4" Fe1” Female 3/4" Fe3/4” Female 3/4" M3/4” Compression 3/4" M3/4" Inverted Flare 3/4" M1” Female 3/4" M3/4" Female 1” Fem3/4" Compression 1” Fem3/4" Inverted Flare 1” Fem1” Female 1” Fem3/4" Female 1” Mal3/4" Compression 1” Mal3/4" Inverted Flare 1” Mal1” Female 1” Mal

SU3- Start Unloader Installed

$4.10

t

Discharge Por

t

Outlet Por

SCFM P/N Price P/N Price P/N Price male 60 NL-1 $169.75 NLDC-1 172.35 NLG-1 176.75 male 60 NL-2 $169.75 NLDC-2 172.35 NLG-2 176.75 male 60 NL-3 $169.75 NLDC-3 172.35 NLG-3 176.75 male 60 NL-4 $169.75 NLDC-4 172.35 NLG-4 176.75 ale 60 NL-6 $169.75 NLDC-6 172.35 NLG-6 176.75 ale 60 NL-7 $169.75 NLDC-7 172.35 NLG-7 176.75 ale 60 NL-8 $169.75 NLDC-8 172.35 NLG-8 176.75 ale 60 NL-9 $169.75 NLDC-9 172.35 NLG-9 176.75 ale 60 NL-11 $169.75 NLDC-11 172.35 NLG-11 176.75 ale 60 NL-12 $169.75 NLDC-12 172.35 NLG-12 176.75 ale 60 NL-13 $169.75 NLDC-13 172.35 NLG-13 176.75 ale 60 NL-14 $169.75 NLDC-14 172.35 NLG-14 176.75 e 60 NL-16 $169.75 NLDC-16 172.35 NLG-16 176.75 e 60 NL-17 $169.75 NLDC-17 172.35 NLG-17 176.75 e 60 NL-18 $169.75 NLDC-18 172.35 NLG-18 176.75 e 60 NL-19 $169.75 NLDC-19 172.35 NLG-19 176.75

SA- Sealed Adjustment

$6.00

SS- Sealed Male Threads $1.14

NL-SERIES OPTIONS

P1- 1/8” ported cap $1.60 P2- ¼” ported cap $1.60

TC-SERIES THROTTLE CONTROLS

CABLE STYLE

(TCP/TCLP) CABLE STYLE

(TCI-TCLI) AIRLINE STYLE

(TCSP)

P/N For Engines Inlet Where Used Price TCP 8HP and below 1/8” MNPT Systems w/external unloaders $13.96* TCI 8HP and below 1/8” MNPT Systems w/external unloaders $17.10* TCLP Above 8HP 1/8” MNPT Systems w/intake unloaders $26.74* TCLI Above 8HP 1/8” MNPT Systems w/intake unloaders $29.84* TCSP-H-5565-B Honda 4/5.5/6.5 HP 1/4” Compression Systems with int/ext unloaders $14.80 TCSP-H-0809-B Honda 8/9 HP 1/4" Compression Systems with int/ext unloaders $25.08 TCSP-H-1113-B Honda 11/13 HP 1/4" Compression Systems with int/ext unloaders $25.08 TCSP-R-456-B Robin EX 4.5/6 HP 1/4" Compression Systems with int/ext unloaders $15.84 TCSP-R-0811-B Robin EX 9/11 HP 1/4" Compression Systems with int/ext unloaders $23.18

0546-Vangaurd Connection

*Prices for the Bullwhip cable style throttles are based on 12” versions. For every 1” beyond 12”, add $.10 to the list price.

CABLE STYLE ACCESSORIES

3203- Honda Bushing

0139- Swivel Clamp $8.90/10

0750- Brigss/Honda C-Style Clamp $8.10/10

0817- Threaded Casing Clamp $6.60/10

$1.93

AIRLINE STYLE ACCESSORIES

Included with all Airline Style models are all the mounting hardware needed for installation.

0751-Cable Clamp w/ Locking Tab $6.60/10

$4.10/10

SAFETY VALVES

Vent

t

DISCHARGE VALVES

Part Number D D1 D2 D3 D4 DL D6-M

SRV UV & NB ASME Code Silicone Seal Max Temperature: 250°

SRH UV & NB ASME Code Stainless Steel Ball Max Temperature: 350°

Pilot Inle

P/N NPT SCFM PSI Range Price SRV187 1/8” 17-118 25-250 $5.09 SRV250 SRV250

1/4" 3/8”

31-214 31-214

25-250 25-250

$5.09 $7.00

SRV390 1/2" 66-449 25-250 $15.43 SRV530 3/4" 143-970 25-250 $34.52 SRV765 1” 304-2066 25-250 $50.39

Discharge Inlet Pilot In1/8” Male 1/8” Fem1/4" Compression 1/8” Fem1/4" Female 1/8” Fem1/4" Compression 1/8” Fem1/4" Female 1/8” Fem1/2" Female 1/8” Fem1/8" Male 1/8” Fem

D-SERIE M-Muffler aon D1 & D2$2.60

P/N NPT SCFM PSI Range Price SRH250 1/4" 51-289 50-350 $12.22 SRH375 1/2" 118-670 50-350 $21.67 SRH580 3/4" 145-1152 25-350 $51.16 SRH580 1” 145-1152 25-350 $51.16

Discharge Inlet

let Vent Size Price ale 1/4"Female $27.50 ale Direct Unported $25.90 ale Direct Unported $25.90 ale 1/4" Female $27.50 ale 1/4" Female $27.50 ale 1/2" Female $54.20 ale Direct Unported $27.50

S OPTIONS

vailable only

SMART START

Inlet

AIC • Replaces standard Inlet Filter • Reduces the time needed to achieve run amperage from

MISCELLANEOUS ITEMS

t

start up and eliminates tripped circuit breakers • Compensates for starting voltage drops and allows the use

of multiple tools on the same circuit • Improves cold weather and extension cord starting

characteristics • Integral inlet filter provides a barrier between worksite

contamination and your compressor

Outle

SCV-1: Control Line Check Valve $24.24

WV-1: Automatic Drain Valve $34.75

Tank Inlet Outlet Pilot Inlet

Inlet

P/N Inlet Price AIC38 3/8” $21.99 AIC12 1/2" $21.99

WV-1-Special: Automatic Drain Valve with complete installation accessories $36.75*

*No discounts apply

WVS-1: Strainer with screen for use with WV-1 drain valve $15.72

REPAIR KITS

P/N Description Price RCB-RK Rebuild kit for RCB’s and RCT’s 6.63 RCL-RK Rebuild kit for RCL’s 14.05 RCL-S-RK Rebuild kit for RCL-S’s 19.67 D-RK Rebuild kit for all D series 6.15 DL-RK Rebuild kit for DL’s 13.78 B-RK Rebuild kit for B series 15.90 B-M-RK Muffler Kit for B series 2.37 BL-RK Rebuild kit for BL series 37.48 N-RK Rebuild kit for all N series 29.14 NL-RK Rebuild kit for all NL series 45.79 OM-AM-RK Rebuild for Dewalt Panel Line $14.29 OM-8PREG-RK Rebuild for Dewalt Panel Line $20.82 OM-8PS-RK Rebuild for Dewalt Panel Line $11.66 OM-8PDC-RK Rebuild for Dewalt Panel Line $10.70 OM-8PCS-RK Rebuild for Dewalt Panel Line $10.64

Conrader Controls Compressors

749 East 18th Street P.O. Box 924

Erie, PA 16512-0924 PH: 814-898-2727 FX: 814-898-3512

www.conrader.com sales@conrader.com

TERMS, CONDITIONS & WARRANTY PRICES This price list supersedes all previous offerings. Prices are subject to change without notice. Invoices will reflect prices at the time of shipment. TAXES Prices do no include any federal, state or local taxes or other governmental charges. Any taxes or governmental charges, which R. CONRADER CO. may be required to pay or collect, will be invoiced to the purchaser. TERMS OF PAYMENT Terms shall be net 30 days, including shipments of partial orders. A 1¼” per month service charge will be added to the invoice amount on all past due accounts. FREIGHT All shipments are F.O.B. Erie, PA unless otherwise stated. Delivery of material to a common carrier shall be considered to be delivery to purchaser. CLAIMS FOR LOSS OF OR DAMAGE TO MATERIAL IN TRANSIT SHALL BE FILED BY THE PURCHASER DIRECTLY WITH THE CARRIER. DELIVERIES All scheduled shipments are determined by the best judgment of R. Conrader Co. Schedules will be adhered to with the best efforts of R. Conrader Co., but are not guaranteed. R. Conrader Co. will not be responsible for delays in delivery or failure to deliver due to causes beyond its control, including without limitations, acts of God, acts of purchaser, fire, flood, accidents, riots, strikes, transportation delays, labor or material shortages or any other causes beyond its control. RETURNS No material is to be returned without our written permission. A minimum inspection and handling charge of 20%, plus freight both ways will be assessed on approved returned goods. Obsolete material and material made on special orders are not returnable. CANCELLATION Orders for special merchandise, modifications of regular merchandise or abnormal quantities of regular merchandise are not subject to cancellation or change in specifications without our written consent and upon terms that will indemnify R. Conrader Co. against consequential loss. MINIMUM CHARGE ORDERS FOR VALVES AND FITTINGS TOTALING LESS THEN $25.00 NET WILL BE BILLED AT A MINIMUM CHARGE OF $25.00. DESIGN Design may be changed without prior notice. WARRANTY All products are guaranteed for one year from date of shipment against manufacturing defects in material and workmanship, provided that in each case the product is properly installed and is used in the service for which the seller recommends. Material claimed to be defective which is returned to our factory within one year after writer prior written approval by R. Conrader Co., transportation prepaid, will be repaired or replaced at the discretion of R. Conrader Co., provided that after inspection the product is found to be defective. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INLCUDING THOSE OF MERCAHNTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.