Toyota Sequoia2008-11

+12 Volt Constant: Lt. Green/ Purple+12 Volt Acessory: Pink/ Black Ground: Black/ Lt. Green Illumination: Lt. Blue/ RedFront Left Positive: Orange/ Lt. GreenFront Left Negative: Lt. Blue/ RedFront Right Positive: White/ Lt. GreenFront Right Negative: Drk. Green/ OrangeRear Left Positive: Gray/ Lt. BlueRear Left Negative:: Tan/ YellowRear Right Positive: Orange/ RedRear Right Negative: Brown/ Pink

OEM COLOR CODES

ABOUT THE VEHICLE

APPLICATIONSSPEAKER NOTES

Make: ToyotaModel: SequoiaYear: 2008-11

STANDARD/ OPTIONAL- AM/FM in-dash multi CD Player/Navigation- Satellite Radio Capable- 3.5mm Aux/mp3/USB/iPod- Bluetooth

Dash Type: New Custom DashAftermarket Type: Single/Double DinAftermarket Kit: TA2073B/TA2108MGBHarness: TA02B/TA07SRAntenna Adapter: Not Required

Auxiliary Input: Under A/C Controls.

Dash: 3 1/2”Upper Door: 1” TweeterLower Door: 6X9”Speaker Adapter: SAT69Speaker Harness: TBASpeaker Assembly: Phillips Head screws.

Dimensions: Dash Upper Door Lower Door L: 3.160 L: 1.493 L: 9.042 W: 3.160 W: 1.493 W: 6.385 D: 1.350 D: 1.153 D: 3.170

Upper Door: 1” TweeterLower Door: 6 1/2”Rear Pillar: 3”Subwoofer: 8”Speaker Adapter: Speaker Harness: TBA Speaker Assembly: Phillips Head Screws.

Dimensions:Upper Door: Lower Door: Pillar: Subwoofer L: 1.493 L: 6.466 L: 3.192 L:8.840 W: 1.493 W: 6.466 W: 3.192 W:8.840 D: 1.153 D: 2.840 D: 1.410 D:4.177

Front Speakers

Rear Speakers FACTORY COLOR CODES(+)12v Battery: Drk. Blue (+)12v Accessory: Gray (-) 12v Ground: White/Black (+)12v Amp Turn On: Gray Left Front Speaker (+): Data Left Front Speaker (-): Data Right Front Speaker (+): Data Right Front Speaker (-): Data Left Rear Speaker (+): Data Left Rear Speaker (-): Data Right Rear Speaker (+): Data Right Rear Speaker (-): Data

Scosche Pro App

+12 Volt Constant: Lt. Green/ Purple+12 Volt Acessory: Pink/ Black Ground: Black/ Lt. Green Rear Right Positive: Orange/ RedRear Right Negative: Brown/ Pink

OEM COLOR CODES

VEHICLE DISASSEMBLY

FRONT DOOR SPEAKERS

RADIO REMOVAL

DASH SPEAKERS

Make: ToyotaModel: SequoiaYear: 2008-11

FRONT DOOR TWEETERS

PRELIMINARY:Disconnect the negative battery cable.

1. With Panel removal Tool, unclip gauge Panel slightly just enough to pull Radio out (Do Not Remove.)2. With panel Removal Tool, unclip Panel under A/C controls and unplug.3. With Panel Removal Tool, unclip A/C control Panel, unplug and remove.4. Extract (4) 10mm screws securing Radio and with Panel Removal Tool, unclip Radio, unplug and remove.

TBA

1. With Panel Removal Tool, unclip Side Mirror/Tweeter Panel and unplug.2. Remove Tweeter by extractin (3) Phillips Head Screws.

1. With panel removal tool, unclip side mirror Panel, unplug and remove.2. With Pick Tool and Panel Removal Tool, extract plastic screw towards the inside of the door.3. With Pick tool, unclip panel inside door handle and extract (1) Phillips Head Screw.4. With Pick Tool, remove carpet mat inside door grip and extract ( 1) Phillips head Screw.5. With panel removal Tool, unclip window control panel, unplug and remove.6. With Panel Removal Tool, unclip Door Panel, unplug and remove.7. Unplug Speaker and remove by extracting (4) Phillips Head Screws securing Speaker.

Scosche Pro App

Toyota Sequoia2008-11

+12 Volt Constant: Lt. Green/ Purple+12 Volt Acessory: Pink/ Black Ground: Black/ Lt. Green Rear Right Positive: Orange/ RedRear Right Negative: Brown/ Pink

OEM COLOR CODES

VEHICLE DISASSEMBLY

SUBWOOFER

REAR DOOR TWEETERS

REAR DOOR SPEAKERS

REAR PILLAR SPEAKERS

PRELIMINARY:Disconnect the negative battery cable.

1. Follow Steps 1-9 of Rear door Speaker Disassembly.2. With Pick Tool, unclip Tweeter from Panel.

1. With Panel Removal Tool, unclip upper Panel above door Panel.2. With Pick Tool, unclip panel inside door handle and extract (1) Phillips Head Screw.3. With Pick Tool, remove the carpet mat inside door grip and extract (1) Phillips Head Screw.4. With Panel removal tool, unclip window control module, unplug and remove.5. With Panel Removal Tool, unclip Door Panel, unplug and remove.6. Unplug Speaker and remove by extracting (3) Phillips Head Screws.

1. With Panel Removal Tool, unclip Speaker Grill.2. Extract (2) T-20 Torx Head Screws, unplug and remove.

1. With Panel Removal Tool, unclip Subwoofer Grill.2. Extract (6) T-20 Torx Head Screws securing Speaker, unplug and remove.

Make: ToyotaModel: SequoiaYear: 2008-11 Scosche Pro App

Toyota Sequoia2008-11

+12 Volt Constant: Lt. Green/ Purple+12 Volt Acessory: Pink/ Black Ground: Black/ Lt. Green Rear Right Positive: Orange/ RedRear Right Negative: Brown/ Pink

OEM COLOR CODES

VEHICLE DISASSEMBLY

SATELLITE MODULE

AMPLIFIER

USB/AUX

REAR ENTERTAINTMENT

PRELIMINARY:Disconnect the negative battery cable.

1. With Panel Removal Tool, unclip Panel covring Amp.2. Extract (4) T-10 Torx Head Screws securing Amp, unplug and remove. TBA.

TBA. TBA.

Make: ToyotaModel: SequoiaYear: 2008-11 Scosche Pro App

Toyota Sequoia2008-11

ta1051 1ta1051 2ta1051 3ta1051 4