2005 Prius Navigation- Advanced Functions

8/3/2019 2005 Prius Navigation- Advanced Functions

1/34

ADVANCED FUNCTIONS

61

ADVANCED FUNCTIONS

Descriptions of functions for more effective use

Suspending and resuming guidance 62. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Volume 63. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

User selection 63. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

My places 66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Area to avoid 73. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setup 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Current position calibration 77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Distance unit 79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Estimated travel time 79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Auto reroute 81. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adjusting time zone 81. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Auto voice guidance 82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voice guidance in all modes 83. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notifying traffic restriction 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Intersection guidance 85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Guidance screen on freeway 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Street name on scroll map 87. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Display of building shape 88. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen layout function ( Function) 89. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

POI category change (Show POI Icons) 90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delete previous point 91. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Map color 92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen animation 93. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SECTIONIII


2/34

ADVANCED FUNCTIONS

62

Suspending and resumingguidance

D To suspend guidance

You can suspend route guidance.

Push the MENU button to display theMenu screen and touch the SuspendGuidance switch.

INFORMATION

When you do not have route guidance,

the Suspend Guidance switchcannot be used.

The screen will return to the current posi-tion map without route guidance.

D To resume guidance

You can resume the suspended routeguidance.

Push the MENU button to display theMenu screen and touch the ResumeGuidance switch.

The screen will change to the current posi-

tion map with route guidance.


3/34

ADVANCED FUNCTIONS

63

VolumeYou can use voice guidance when ap-proaching a destination.

You can adjust the volume of the voice or turnoff voice guidance.

Push the MENU button to display theMenu screen, and touch the Volumeswitch.

To adjust the volume, select the desired levelby touching the appropriate number.

If you do not need voice guidance, touch the

Off switch.

The selected item is highlighted in green.

INFORMATION

During route guidance, the voice guid-ance continues even if the navigationscreen is changed to other screens.

Adaptive Volume Control: If you turn theAdaptive Volume Control on, the volume isturned up automatically when the vehiclespeed exceeds 50 mph (80 km/h).

To turn the Adaptive Volume Control systemon, touch the switch. The indicator will be

highlighted.

User selectionThe system can memorize the followingsettings for up to three users.

D Map direction

D Map scale

D Guidance mode

D Setup

D Volume

D Language

Push the MENU button to display theMenu screen. Then touch the SelectUser switch.


4/34

ADVANCED FUNCTIONS

64

D To register

Touch the Memorize switch of yourdesired User number.

The confirmation screen will appear. Toregister, touch the Yes switch. To re-turn to the previous screen, touch theNo or Back switch.

When you touch the switch already regis-tered, this screen appears. To replace,touch the Yes switch. To cancel the re-placement, touch the No or Back

switch.


5/34

ADVANCED FUNCTIONS

65

D To change user

Push the MENU button to display theMenu screen. Then touch the SelectUser switch.

Touch the User number switch youwish to change.

The above message appears, then themap screen will be displayed.

D To delete user

Touch the Delete switch of User num-ber you wish to delete.


6/34

ADVANCED FUNCTIONS

66

The confirmation screen appears. To de-lete, touch the Yes switch. To return tothe previous screen, touch the No orBack switch.

My placesYou can register and keep your ownmemory points (like restaurants, sports fa-cilities, etc.) and use the memory points toinput a destination.

(a) Registering memory points

1. Push the MENU button to displaythe Menu screen and touch the My

Places switch.


7/34

ADVANCED FUNCTIONS

67

2. Touch the Register switch of theMemory Points.

A screen similar to the destination inputscreen appears. Input the desired point in thesame way as inputting a destination. (Seepage 20.)

When you finish memory point registration,the memory point data screen will appear.

You can set the icon, attribute, name, locationand phone number.

Touch your desired switch you want to set.(For details, see (b) Editing memory points.)

INFORMATION

Up to 106 memory points can be regis-tered.
http://../01omsour/2005/05priusn/sec2.pdfhttp://../01omsour/2005/05priusn/sec2.pdf


8/34

ADVANCED FUNCTIONS

68

(b) Editing memory pointsThe icon, attribute, name, location and/ortelephone number of a registered memorypoint can be edited.

1. Push the MENU button to displaythe Menu screen and touch the MyPlaces switch.

2. Touch the Edit switch of theMemory Points.

The screen lists the memory points.

Date: Touch this switch to list the memorypoints in order of the registered date.

Icon: Touch this switch to list the memory

points in order of the icon type.

Name: Touch this switch to list the memorypoints in alphabetical order.

Attribute: Touch this switch to list thememory points in order of the home and quickaccess number.

Touch the desired memory point switch to dis-play the memory point data screen.

3. Touch the switch which you wish toedit.


9/34

ADVANCED FUNCTIONS

69

D To change Icon

Touch the desired icon.

You can turn the page by touching Page1, Page 2 or With Sound switch.

With Sound: To display sound icons.When your vehicle approaches the memorypoint, the sound which you chose will sound.

Touch the desired sound icon.

The next screen appears when you touch theBell (with direction) switch.

Touch the direction switches and adjust the

direction. Touch the Enter switch. Thebell sounds only when your vehicle ap-

proaches this point in the direction that you

set.


10/34

ADVANCED FUNCTIONS

70

D To change Attribute

For easy destination input, set the attrib-ute of the memory points as Home orQuick access 1 to 5.

Touch the desired attribute. It is possibleto replace a registered attribute.

To replace the attribute, touch the Yesswitch. To return to the previous screen,touch the No or Back switch.

To delete the attribute, touch the Del.switch.


11/34


12/34


13/34

ADVANCED FUNCTIONS

73

Area to AvoidAreas you wish to avoid because of trafficjams, construction work or other reasonscan be registered as areas to avoid.

Push the MENU button to display theMenu screen and then touch the MyPlaces switch to display the followingscreen.

INFORMATION

If a destination is inputted in the area toavoid or the route calculation cannot bemade without running through the areato avoid, a route passing through thearea to avoid may be shown.

(a) Registering area to avoid

1. Touch the Register switch of theAreas to avoid.

2. Enter the location in the same way asinputting a destination, or display the mapof the area you wish to avoid. (See page20.)

INFORMATION

Up to 10 locations can be registered aspoint/area to avoid. If there are 10 loca-tions already registered, the messageUnable to register additional points.Perform operation again after deletingunnecessary points. appears on thescreen.

3. Set the cursor in the center of the areato avoid, and touch the Enter switch.
http://../01omsour/2005/05priusn/sec2.pdfhttp://../01omsour/2005/05priusn/sec2.pdf


14/34

ADVANCED FUNCTIONS

74

4. Touch either or switch to

change the size of the area to avoid.

(b) Editing area to avoid

1. Touch theEdit switch of the Areasto Avoid to display the Edit Area toAvoid screen.

2. To edit an area to avoid, touch the cor-responding switch.

3. Touch the Name, Location orArea Size switch on this screen.


15/34


16/34


17/34


18/34

ADVANCED FUNCTIONS

78

D Position/Direction calibration

1. Touch the scroll arrows to move thecursor to your desired location.

Touch the Enter switch.

2. Touch either the or switch to ad-

just the direction of the current vehicleposition mark.

Touch the Enter switch and the mapscreen will be displayed.

D Tire change calibration

The tire change calibration function will beused when replacing the tires. This func-tion will adjust the mis-calculation causedby the circumference difference betweenthe old tires and new ones. If this proce-dure is not performed when tires are re-placed, the current vehicle position markmay be incorrectly displayed.

To perform a distance calibration procedure,touch the Tire Change switch on theCalibration screen.

The message appears and the quick distancecalibration is automatically started. A fewseconds later, a map screen will be displayed.


19/34

ADVANCED FUNCTIONS

79

Distance unit

1. Push the MENU button.

2. Touch the Setup switch.

3. Touch the km ormiles switch ofDistance to choose the distance unit.

The selected switch is highlighted in green.

4. Touch the OK switch.

Estimated travel time

You can set the speed that is used for thecalculation of the estimated travel time.



20/34


21/34

ADVANCED FUNCTIONS

81

Auto reroute

When the Auto Reroute feature is turnedon, the system will automatically searchfor a new route to the destination if youstrays from the guidance route. This fea-ture does not operate while you are drivingon roads where guidance is not available.

To turn the Auto Reroute mode on:



3. Touch the On switch of AutoReroute.


INFORMATIONIf your vehicle strays from the guidanceroute, the system searches for a newroute to the destination. The new routemay or may not take you back to the pre-vious route depending on how far youare off the original guidance route.

Adjusting time zone




22/34

ADVANCED FUNCTIONS

82

3. Touch the Change switch. TheAdjust Time Zone screen appears on thedisplay.

4. Touch the desired time zone.


5. Touch theOK switch on the screenand the Setup screen will be displayed.

Auto voice guidance

When the Auto Voice Guidance featureis turned on, the voice guidance can beheard automatically.

When the Auto Voice Guidance featureis turned off, the voice guidance can beheard only if you push the MAP/VOICE button.

To turn the Auto Voice Guidance modeon:


2. Touch the Setup switch. Then

touch switch to display page 2 of the

Setup screen.


23/34

ADVANCED FUNCTIONS

83

3. Touch theOn switch of Auto VoiceGuidance.

The selected switch is highlighted ingreen.

Voice guidance in all modes

When the Voice Guidance in All Modesfeature is turned on, you can hear thevoice guidance in all modes.

When the Voice Guidance in All Modesfeature is turned off, voice guidance can-not be heard when you using the audiosystem.

To turn the Voice Guidance in All Modeson:

1. Push the MENU button.2. Touch the Setup switch. Then


Setup screen.


24/34

ADVANCED FUNCTIONS

84

3. Touch theOn switch of Voice Guid-ance in All Modes and touch the OKswitch.

Notifying traffic restriction

When the Notify Traffic Restriction fea-ture is turned on, the system notifies youof traffic or seasonal restriction.

To turn the Notify Traffic Restrictionmode on:




Setup screen.


25/34


26/34

ADVANCED FUNCTIONS

86

3. Touch the On switch of Intersec-tion Guidance and touch the OKswitch.

Guidance screen on freeway

When the Guidance Screen on Freewayfeature is turned on, the system will dis-play the lane guidance screen if you driveon a freeway with route guidance.

To turn the Guidance Screen on Free-way mode on:




Setup screen.


27/34

ADVANCED FUNCTIONS

87

3. Touch the On switch of GuidanceScreen on Freeway and touch the OKswitch.

Street name on scroll map

When the Street Name on Scroll Mapfeature is turned on, the system will dis-play the name of a street where the cursor

is positioned on the scroll map.

To turn the Street Name on Scroll Mapmode on:



touch switch twice to display page 3 of

the Setup screen.


28/34

ADVANCED FUNCTIONS

88

3. Touch the On switch of StreetName on Scroll Map and touch the OKswitch.

Display of building shape

When the Display Building Shape fea-ture is turned on, the system will displaythe building shape on the map screen us-ing a scale of 150 feet (50 m) to 300 feet(100 m).

To turn the Display Building Shapemode on:




the Setup screen.


29/34

ADVANCED FUNCTIONS

89

3. Touch the On switch of DisplayBuilding Shape and touch the OKswitch.

Screen layout function

( Function)

You can set display or hide each switchand current street name on the mapscreen.




the Setup screen.

3. Touch the Change switch of the Function.

4. Touch the switch corresponding to thedesired setting. Then touch the OKswitch.


30/34

ADVANCED FUNCTIONS

90

POI category change(Show POI Icons)

You can choose 6 icons displayed on theShow POI Icons top screen, so that youcan easily set which icons to display onthe map screen.




the Setup screen.

3. Touch the Change switch ofShow POI Icons.

4. Touch the category switch you wish tochange.


31/34


32/34

ADVANCED FUNCTIONS

92

4. Touch the switch you want to delete.

For efficient previous point search, pre-vious points can be sorted by the Dateor Name switch.

5. To delete the point, touch the Yesswitch.

To cancel the deletion, touch the Noswitch.

Map color



touch switch three times to displaypage 4 of the Setup screen.


33/34


34/34

ADVANCED FUNCTIONS

94

2005 Prius Navigation- Advanced Functions

Documents

Transcript of 2005 Prius Navigation- Advanced Functions