2004 Civic Hybrid Online Reference Owner's...

2004 Civic Hybrid Online Reference Owner's Manual Use these links (and links throughout this manual) to navigate through this reference. For a printed owner's manual, click on authorized manuals or go to www.helminc.com. Contents

Owner's Identification Form

Introduction ..................................................................................................................................................... i

A Few Words About Safety .......................................................................................................................... ii

Your Vehicle at a Glance ...............................................................................................................................2

Driver and Passenger Safety .......................................................................................................................5 Important information about proper use and care of your vehicle's seat belts, an overview of Supplemental

Instruments and Controls...........................................................................................................................49Explains the purpose of each instrument panel indicator and gauge, and how to use controls on

Comfort and Convenience Features.........................................................................................................87How to operate the heating and air conditioning system, the audio system, and other convenience

Before Driving .............................................................................................................................................113 What gasoline to use, how to break-in your new vehicle, and how to load luggage and other cargo.

Driving ...........................................................................................................................................................127 The proper way to start the engine, shift the transmission, and park.

Maintenance .................................................................................................................................................143The Maintenance Schedule shows you when you need to take your vehicle to the dealer. There is also

Taking Care of the Unexpected...............................................................................................................177This section covers several problems motorists sometimes experience, and details how to handle them.

Technical Information ...............................................................................................................................201ID numbers, dimensions, capacities, and technical information.

Warranty and Customer Relations (U.S. and Canada only) .............................................................213 A summary of the warranties covering your new Honda, and how to contact us for any reason. Refer to

Authorized Manuals (U.S. only)...............................................................................................................217 How to order manuals and other technical literature.

Index ................................................................................................................................................................. I

Service Information Summary A summary of information you need when you pull up to the fuel pump.

Restraint System, and valuable information on how to protect children with child restraints.

the dashboard and steering column.

features.

a list of things to check and instructions on how to check them.

your warranty manual for detailed information.

The information and specifications includedin this publication were in effect at the timeof approval for printing. Honda Motor Co.,Ltd. reserves the right, however, todiscontinue or change specifications ordesign at any time without notice andwithout incurring any obligation whatsoever.

This Owner’s Manual should be considereda permanent part of the vehicle, and shouldremain with the vehicle when it is sold.

This Owner’s Manual covers all models ofthe Civic Hybrid. You may find descriptionsof equipment and features that are not onyour particular model.

Owner’s Identif ication

OWNER

ADDRESS

V. I. N.

DELIVERY DATE

DEALER NAME DEALER NO.

ADDRESS

OWNER’S SIGNATURE

DEALER’S SIGNATURE

STREET

CITY STATE/PROVINCE ZIP CODE/POSTAL CODE

(Date sold to original retail purchaser)

STREET

CITY STATE/PROVINCE ZIP CODE/POSTAL CODE

One of the best ways to enhance the enjoyment of your new Honda is toread this manual. In it, you will learn how to operate its driving controls andconvenience items. Afterwards, keep this owner’s manual in your vehicle soyou can refer to it at any time.

Several warranties protect your new Honda. Read the warranty bookletthoroughly so you understand the coverages and are aware of your rightsand responsibilities.

California Proposition 65 Warning

This product contains or emits chemicals known to the State ofCalifornia to cause cancer and birth defects or other reproductive harm.

As you read this manual, you willfind information that is preceded bya symbol. Thisinformation is intended to help youavoid damage to your Honda, otherproperty, or the environment.

Maintaining your vehicle according to the schedules given in this manualhelps to keep your driving trouble-free while it preserves your investment.When your vehicle needs maintenance, keep in mind that your Hondadealer’s staff is specially trained in servicing the many systems unique toyour Honda. Your Honda dealer is dedicated to your satisfaction and will bepleased to answer any questions and concerns.

Congratulations! Your selection of a 2004 Honda Civic Hybrid was a wiseinvestment. It will give you years of driving pleasure.

Introduction

WARNING:

i

－

－

－

－

－

－

To help you make informeddecisions about safety, we haveprovided operating procedures andother information on labels and inthis manual. This information alertsyou to potential hazards that couldhurt you or others.

You will find this important safety information in a variety of forms,including:

preceded by a safety alert symbol and one ofthree signal words: , , or .These signal words mean:

such as Important Safety Reminders or ImportantSafety Precautions.

such as Driver and Passenger Safety.

This entire book is filled with important safety information please read itcarefully.

Your safety, and the safety of others,is very important. And operating thisvehicle safely is an importantresponsibility.

Of course, it is not practical orpossible to warn you about all thehazards associated with operating ormaintaining your vehicle. You mustuse your own good judgement.

on the vehicle.

how to use this vehicle correctly and safely.

A Few Words About Safety

Safety Messages

Safety Headings

Safety Section

Safety Labels

Instructions

DANGER WARNING CAUTION

ii

You WILL be KILLED or SERIOUSLYHURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLYHURT if you don’t follow instructions.

You CAN be HURT if you don’t followinstructions.

Your Vehicle at a Glance

2

AIRBAGS

HEATING/COOLING CONTROLS

FUEL FILL DOOR RELEASE

HOOD RELEASEHANDLE

POWER WINDOWSWITCHES

MANUAL TRANSMISSION

TRUNK RELEASE

POWER DOORLOCK SWITCH

INSTRUMENT PANEL

AUTOMATIC TRANSMISSION (CVT)

(P. 73)

(P. 51)

(P. 115)

(P. 74)

(P. 117)(P. 133)

(P. 130)

(P. 88)

(P. 10, 22)

(P. 79)

Your Vehicle at a Glance

3

CRUISE CONTROL SWITCHES

ECON BUTTON

ACCESSORY POWERSOCKET

HORN

HEADLIGHTS/TURN SIGNALS

CRUISE CONTROLMASTER SWITCH

REAR WINDOWDEFOGGER

MIRROR CONTROLS TILT ADJUSTMENT

WINDSHIELD WIPERS/WASHERS

HAZARD WARNING BUTTON(P. 67)

(P. 65)

(P. 66)

(P. 109)

(P. 68)

(P. 69) (P. 109)

(P. 89)

AUDIO SYSTEM(P. 94)

DIGITAL CLOCK(P. 108)

(P. 81)

(P. 85)

－

This section gives you importantinformation about how to protectyourself and your passengers. Itshows you how to use seat beltsproperly. It explains how yourairbags work. And it tells you how toproperly restrain infants andchildren in your vehicle.

.........Important Safety Precautions . 6.......Your Vehicle’s Safety Features . 7

.......................................Seat Belts . 8.........................................Airbags . 10

.........Protecting Adults and Teens . 11.....1. Close and Lock the Doors . 11

...........2. Adjust the Front Seats . 11............3. Adjust the Seat-Backs . 13

...4. Adjust the Head Restraints . 145. Fasten and Position the

...Lap/Shoulder Seat Belts . 14....6. Adjust the Steering Wheel . 16

7. Maintain a Proper Sitting................................Position . 16

.....Advice for Pregnant Women . 17...Additional Safety Precautions . 18

Additional Information About Your.................................Seat Belts . 19

..Seat Belt System Components . 19......................Lap/Shoulder Belt . 19

Automatic Seat Belt...............................Tensioners . 20

...............Seat Belt Maintenance . 21Additional Information About

...........................Your Airbags . 22......Airbag System Components . 22

How Your Front Airbags.........................................Work . 22

...How Your Side Airbags Work . 25..How the SRS Indicator Works . 26

How the Side Airbag Off......................Indicator Works . 27

.............................Airbag Service . 28...Additional Safety Precautions . 28

Protecting Children General................................Guidelines . 29

All Children Must Be...............................Restrained . 29

All Children Should Sit in the.................................Back Seat . 30

The Passenger’s Front Airbag.........Can Pose Serious Risks . 30

If You Must Drive with Several...................................Children . 32

If a Child Requires Close..................................Attention . 32

...Additional Safety Precautions . 33...........................Protecting Infants . 34

.............Protecting Small Children . 35.....................Selecting a Child Seat . 36....................Installing a Child Seat . 37

Installing a Child Seat Using.....................................LATCH . 38

Installing a Child Seat with a..................Lap/shoulder Belt . 40

Installing a Child Seat with a......................................Tether . 41

...........Protecting Larger Children . 42...............Checking Seat Belt Fit . 43

..................Using a Booster Seat . 43...Additional Safety Precautions . 45

.............Carbon Monoxide Hazard . 46...................................Safety Labels . 47

Driver and Passenger Safety

Driver and Passenger Safety 5

You’ll find many safetyrecommendations throughout thissection, and throughout this manual.The recommendations on this pageare the ones we consider to be themost important.

A seat belt is your best protection inall types of collisions. Airbagssupplement seat belts, but airbagsare designed to inflate only in amoderate to severe frontal collision.So even though your vehicle isequipped with airbags, make sureyou and your passenger always wearyour seat belts, and wear themproperly. (See page ).

Children age 12 and under shouldride properly restrained in a backseat. Infants and small childrenshould be restrained in a child seat.Larger children should use a boosterand a lap/shoulder belt until they

can use the belt properly without abooster (see page ). Excessive speed is a major factor in

crash injuries and deaths. Generally,the higher the speed the greater therisk, but serious injuries can alsooccur at lower speeds. Never drivefaster than is safe for currentconditions, regardless of themaximum speed posted.

Having a tire blowout or amechanical failure can be extremelyhazardous. To reduce the possibilityof such problems, check your tirepressures and condition frequently,and perform all regularly scheduledmaintenance (see page ).

While airbags can save lives, theycan cause serious or fatal injuries tooccupants who sit too close to them,or are not properly restrained.Infants, young children, and shortadults are at the greatest risk. Besure to follow all instructions andwarnings in this manual.

Alcohol and driving don’t mix. Evenone drink can reduce your ability torespond to changing conditions, andyour reaction time gets worse withevery additional drink. So don’t drinkand drive, and don’t let your friendsdrink and drive, either.

14

29

147

Important Safety Precautions


Always Wear Your Seat Belt

Restrain All Children

Be Aware of Airbag Hazards

Control Your Speed

Keep Your Vehicle in SafeCondition

Don’t Drink and Drive

6

Some safety features do not requireany action on your part. Theseinclude a strong steel frameworkthat forms a safety cage around thepassenger compartment; front andrear crash zones, a collapsiblesteering column, and seat belttensioners that tighten the front seatbelts in the event of a crash.

Your vehicle is equipped with manyfeatures that work together toprotect you and your passengersduring a crash.

CONTINUED


Your Vehicle’s Safety Features

7

(9)

(2)

(8)

(6)(4)(3)(1)(10)

(8)

(7)

(5)

(2)

(7)

(1) Safety Cage(2) Crush Zone(3) Seats & Seat-Backs(4) Head Restraints(5) Collapsible Steering Column(6) Seat Belts(7) Front Airbags(8) Side Airbags

(U.S.models and optional forCanadian model)

(9) Seat Belt Tensioners(10) Door Locks

However, you and your passengerscan’t take full advantage of thesesafety features unless you remainsitting in a proper position andalways wear your seat belts properly.In fact, some safety features cancontribute to injuries if they are notused properly.

The following pages explain how youcan take an active role in protectingyourself and your passengers.

Seat belts are the single mosteffective safety device for adults andlarger children (Infants and smallerchildren must be properly restrainedin child seats).

In addition, most states and allCanadian provinces require you towear seat belts.

Your vehicle is equipped with seatbelts in all seating positions.

Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, eventhough your vehicle has airbags.

Your seat belt system also includesan indicator on the instrument panelto remind you and your passengersto fasten your seat belts.


Seat Belts Why Wear Seat Belts


8

When properly worn, seat belts:

Help protect you in almost everytype of crash, including frontal,side, and rear impacts androllovers.

Help keep you from being thrownagainst the inside of the vehicleand against other occupants.

Keep you from being thrown outof the vehicle.

Help keep you in a good positionshould the airbags ever deploy. Agood position reduces the risk ofinjury from an inflating airbag, andallows you to get the bestadvantage from the airbag.

Of course, seat belts cannotcompletely protect you in everycrash. But in most cases, seat beltscan reduce your risk of seriousinjury.

Always wear your seat belt, andmake sure you wear it properly.

Keep you connected to the vehicleso you can take advantage of thevehicle’s built-in safety features.


What You Should Do:


9

Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, evenif you have airbags.

Be sure you and yourpassengers always wear seatbelts and wear them properly.

Your vehicle has a SupplementalRestraint System (SRS) with frontairbags to help protect the heads andchests of the driver and a front seatpassenger during a moderate tosevere frontal collision (see page

for more information on howyour front airbags work).

The most important things you needto know about your airbags are:

They are designed to supplementthe seat belts.

To dotheir job, airbags must inflate withtremendous force. So whileairbags help save lives, they cancause minor injuries or moreserious or even fatal injuries ifoccupants are not properlyrestrained or sitting properly.

Always wearyour seat belt properly, and situpright, and as far back from thesteering wheel while allowing fullcontrol of the vehicle. A frontpassenger should move their seat asfar back from the dashboard aspossible.

Your vehicle also has side airbags tohelp protect the upper torso of thedriver or a front seat passengerduring a moderate to severe sideimpact (see page for moreinformation on how your side airbagswork).

2225

Only models equipped with side airbags.


Airbags

Airbags do not replace seat belts.

Airbags offer no protection in rearimpacts, or minor frontal or sidecollisions.Airbags can pose hazards.

What you should do:


10

The rest of this section gives moredetailed information about how youcan maximize your safety.

Remember however, that no safetysystem can prevent all injures ordeaths that can occur in severecrashes, even where seat belts areproperly worn and the airbags deploy.

The following pages provideinstructions on how to properlyprotect the driver, adult passengersand teenage children who are largeenough and mature enough to ride inthe front seat.

See page for important guidelineson how to properly protect infants,small children, and larger childrenwho ride in your vehicle.

After everyone has entered thevehicle, be sure the doors are closedand locked.

Locking the doors reduces thechance of someone being thrown outof the vehicle during a crash and ithelps prevent passengers fromaccidentally opening and falling out.

Locking the doors also helps preventan outsider from unexpectedlyopening a door when you come to astop.

See page for how to lock thedoors.

Adjust the driver’s seat as far to therear as possible while allowing you tomaintain full control of the vehicle.Have a front passenger adjust theirseat as far to the rear as possible.

If you sit too close to the steeringwheel or dashboard, you can beseriously injured by an inflating frontairbag, or by striking the steeringwheel or dashboard.

3073

CONTINUED

Protecting Adults and Teens


Close and Lock the Doors Adjust the Front Seats1. 2.

11

The National Highway Traffic SafetyAdministration and TransportCanada recommend that driversallow at least 10 inches (25 cm)between the center of the steeringwheel and the chest.

If you cannot get far enough awayfrom the steering wheel and stillreach the controls, we recommendthat you investigate whether sometype of adaptive equipment may help.

Once your seat is adjusted correctly,rock it back and forth to make surethe seat is locked into position. Seepage for how to adjust the frontseats.

77


Driver and Passenger Safety12

Sitting too close to a frontairbag can result in seriousinjury or death if the frontairbags inflate.

Always sit as far back from thefront airbags as possible.

Adjust the driver’s seat-back to acomfortable, upright position,leaving ample space between yourchest and the airbag cover in thecenter of the steering wheel.

Passengers with adjustable seat-backs should also adjust their seat-back to a comfortable, uprightposition.

Reclining a seat-back so that theshoulder part of the belt no longerrests against the occupant’s chestreduces the protective capability ofthe belt. It also increases the chanceof sliding under the belt in a crashand being seriously injured. Thefarther a seat-back is reclined, thegreater the risk of injury.

See page for how to adjust seat-backs.

77



Adjust the Seat-Backs3.

13

Reclining the seat-back too farcan result in serious injury ordeath in a crash.

Adjust the seat-back to anupright position, and sit wellback in the seat.

Adjust the driver’s head restraint sothe back of your head rests againstthe center of the restraint.

Have passengers with adjustablerestraints adjust their restraintsproperly as well. Taller personsshould adjust their restraint as highas possible.

Properly adjusted head restraintswill help protect occupants fromwhiplash and other crash injuries.

See page for how to adjust thehead restraints.

Insert the latch plate into the buckle,then tug on the belt to make sure thebelt is securely latched. Also checkthat the belt is not twisted, because atwisted belt can cause seriousinjuries in a crash.

Position the lap part of the belt aslow as possible across your hips,then pull up on the shoulder part ofthe belt so the lap part fits snugly.This lets your strong pelvic bonestake the force of a crash and reducesthe chance of internal injuries.

78



Adjust the Head Restraints Fasten and Position the Lap/Shoulder Seat Belts

4. 5.

14

Improperly positioning headrestraints reduces theireffectiveness and you can beseriously injured in a crash.

Make sure head restraints arein place and positioned properlybefore driving.

If necessary, pull up on the belt againto remove any slack, then check thatthe belt rests across the center ofyour chest and over your shoulder.This spreads the forces of a crashover the strongest bones in yourupper body.

This could causevery serious injuries in a crash.

If the seat belt touches or crossesyour neck, or if it crosses your arminstead of your shoulder, you need toadjust the seat belt anchor height.

To adjust the height of a front seatbelt anchor, press and hold therelease buttons and slide the anchorup or down as needed (it has fourpositions).

CONTINUED



Never place the shoulder portion of alap/shoulder belt under your arm orbehind your back.

15

Improperly positioning the seatbelts can cause serious injuryor death in a crash.

Make sure all seat belts areproperly positioned beforedriving.

If a seat belt does not seem to workas it should, it may not protect theoccupant in a crash.

Using a seatbelt that is not working properly canresult in serious injury or death.Have your Honda dealer check thebelt as soon as possible.

See page for additionalinformation about your seat beltsand how to take care of them.

Adjust the steering wheel, if needed,so that the wheel points toward yourchest, not toward your face. Thisprovides optimal protection from thefront airbag.

See page for how to adjust thesteering wheel.

After all occupants have adjustedtheir seats and put on seat belts, it isvery important that they continue tosit upright, well back in their seats,with their feet on the floor, until thevehicle is parked and the engine isoff.

Sitting improperly can increase thechance of injury during a crash. Forexample, if an occupant slouches,lies down, turns sideways, sitsforward, leans forward or sideways,or puts one or both feet up, thechance of injury during a crash isgreatly increased.

19

69



No one should sit in a seat with aninoperative seat belt.

Adjust the Steering Wheel Maintain a Proper SittingPosition

6. 7.

16

In addition, an occupant who is out ofposition in the front seat can beseriously or fatally injured in a crashby striking interior parts of thevehicle or being struck by aninflating front airbag. Being struckby an inflating side airbag canpossibly result in serious injuries.

If you are pregnant, the best way toprotect yourself and your unbornchild when driving or riding in avehicle is to always wear a seat belt,and keep the lap part of the belt aslow as possible across the hips.

When driving, remember to situpright and adjust the seat as farback as possible while allowing fullcontrol of the vehicle. When ridingas a front passenger, adjust the seatas far back as possible.

This will reduce the risk of injuriesto both you and your unborn childthat can be caused by a crash or aninflating front airbag.

Each time you have a check-up, askyour doctor if it’s okay for you todrive.


Advice for Pregnant Women


Sitting improperly or out ofposition can result in seriousinjury or death.

Always sit upright, well back inthe seat, with your feet on thefloor.

If yourhands or arms are close to anairbag cover, they could be injuredif the airbag inflates.

Carrying hard or sharpobjects on your lap, or driving witha pipe or other sharp objects inyour mouth, can result in injuriesif your front airbag inflates.

Objects onthe covers marked ‘‘SRS AIRBAG’’could interfere with the properoperation of the airbags or if bepropelled inside the vehicle andhurt someone if the airbags inflate.

If they do, theycould be very seriously injured in acrash.

Devices intended to improveoccupant comfort or reposition theshoulder part of a seat belt canreduce the protective capability ofthe seat belt and increase thechance of serious injury in a crash.

If a side airbaginflates, a cup holder or other hardobject attached on or near thedoor could be propelled inside thevehicle and hurt someone.



Keep your hands and arms awayfrom the airbag covers.

Do not place hard or sharp objectsbetween yourself and a frontairbag.

Do not attach or place objects onthe front airbag covers.

Two people should never use thesame seat belt.

Do not put any accessories on seatbelts.

On models with side airbags, donot attach hard objects on or neara front door.

Additional Safety Precautions

18

Your seat belt system includes lap/shoulder belts in all five seatingpositions. The front seat belts arealso equipped with automatic seatbelt tensioners.

The lap and shoulder belt goes overyour shoulder, across your chest,and across your hips.

To fasten the belt, insert the latchplate into the buckle, then tug on thebelt to make sure the buckle islatched (see page for how toproperly position the belt).

To unlock the belt, push the redPRESS button on the buckle. Guidethe belt across your body so that itretracts completely. After exiting thevehicle, be sure the belt is out of theway and will not get closed in thedoor.

All seat belts have an emergencylocking retractor. In normal driving,the retractor lets you move freely inyour seat while it keeps sometension on the belt. During a collisionor sudden stop, the retractorautomatically locks the belt to helprestrain your body.

The seat belts in all positions exceptthe driver’s have an additionallocking mechanism that must beactivated to secure a child seat (seepage ).

If the shoulder part of the belt ispulled all the way out, the lockingmechanism will activate. The beltwill retract, but it will not allow thepassenger to move freely.

The seat belt systemincludes an indicator on the

instrument panel and a beeper toremind you and your passengers tofasten your seat belts.

If you turn the ignition switch to ON(II) before fastening your belt, thebeeper sounds and the indicatorflashes. If you do not fasten yourseat belt before the beeper stops, theindicator stops flashing but remainson.

If you continue driving withoutfastening your seat belt, the beepersounds and the indicator flashesagain at regular intervals.

40

14

CONTINUED

Additional Information About Your Seat Belts


Seat Belt System Components Lap/Shoulder Belt

19

To deactivate the lockingmechanism, unlatch the buckle, andlet the seat belt fully retract. Torefasten the belt, pull it out only asfar as needed.

For added protection, the front seatbelts are equipped with automaticseat belt tensioners. When activated,the tensioners immediately tightenthe belts to help hold the driver anda front passenger in place.

The tensioners are designed toactivate primarily in frontal collisions,and they should activate in anycollision severe enough to causefront-airbag inflation.

When the tensioners are activated,the seat belts will remain tight untilthey are unbuckled in the normalmanner.

However, the tensioners can beactivated during a collision wherethe front airbags do not deploy. Inthis case, the airbags would not beneeded, but the additional restraintcould be helpful.



Automatic Seat Belt Tensioners

20

For safety, you should check thecondition of your seat belts regularly.

Pull each belt out fully and look forfrays, cuts, burns, and wear. Checkthat the latches work smoothly andthe belts retract easily. Any belt thatis not in good condition or notworking properly will not providegood protection and should bereplaced as soon as possible.

Honda provides a lifetime warrantyon seat belts for U.S. models. Seeyourbooklet for details.

If a seat belt is worn during a crash,it must be replaced by the dealer. Abelt that has been worn during acrash may not provide the same levelof protection in a subsequent crash.The dealer should also inspect theanchors for damage and replacethem if needed. If the automatic seatbelt tensioners activate during acrash, they must be replaced.

Honda Warranty Information



Seat Belt Maintenance

21

Not checking or maintainingseat belts can result in seriousinjury or death if the seat beltsdo not work properly whenneeded.

Check your seat belts regularlyand have any problemcorrected as soon as possible.

Your airbag system includes:

Two SRS (Supplemental RestraintSystem) front airbags. The driver’sairbag is stored in the center ofthe steering wheel; the frontpassenger’s airbag is stored in thedashboard. Both are marked ‘‘SRSAIRBAG.’’

A sophisticated electronic systemthat continually monitors andrecords information about thesensors, the control unit, theairbag activators, and driver andfront passenger seat belt use whenthe ignition is in the ON (II)position.

If you ever have a moderate tosevere frontal collision, sensors willdetect the vehicle’s rapiddeceleration. If the rate ofdeceleration is high enough, thecontrol unit will instantly inflate thedriver’s and front passenger’s frontairbags, at the time and with theforce needed.

Sensors that can detect amoderate to severe frontal impactor side impact in models equippedwith side airbags.

Automatic seat belt tensioners(see page ).

one for the driver and one for afront passenger. The airbags arestored in the outer edges of theseat-backs. Both are marked‘‘SIDE AIRBAG’’ (see page ).

Emergency backup power in caseyour vehicle’s electrical system isdisconnected in a crash.

an indicator on the dashboard thatalerts you that the passenger’sside airbag has been turned off(see page ).

An indicator on the instrumentpanel that alerts you to a possibleproblem with your airbags (seepage ).

20

25

26

27

On models equipped with side airbags,

On models equipped with side airbags,

Additional Information About Your Airbags


Airbag System Components How Your Front Airbags Work

22

During a frontal crash, your seat beltrestrains your lower body and torso,and the airbag helps protect yourhead and chest.

This can happen if the severity of acollision is at the margin, orthreshold, that determines whetheror not the airbags will deploy. Insuch cases, the seat belt will providesufficient protection, and thesupplemental protection offered bythe airbag would be minimal.

After inflating, the front airbagsimmediately deflate, so they won’tinterfere with the driver’s visibility,or the ability to steer or operateother controls.

The total time for inflation anddeflation is one-tenth of a second, sofast that most occupants are notaware that the airbags deployed untilthey see them lying in their laps.

After a crash, you may see whatlooks like smoke. This is actuallypowder from the airbag’s surface.Although the powder is not harmful,people with respiratory problemsmay experience some temporarydiscomfort. If this occurs, get out ofthe vehicle as soon as it is safe to doso.

Although both airbags normallyinflate within a split second of eachother, it is possible for only oneairbag to deploy.

CONTINUED



Your front airbags are dual-stageairbags. This means they have twoinflation stages that can be ignitedsequentially or simultaneously,depending on crash severity.

In a crash, both stageswill ignite simultaneously to providethe quickest and greatest protection.

In a crash, one stage willignite first, then the second stagewill ignite a split second later. Thisprovides longer airbag inflation timewith a little less force.

Your front airbags are also dual-threshold airbags. Airbags with thisfeature have two deploymentthresholds that depend on whetheror not the occupant is wearing a seatbelt.

If the occupant’s belt is ,the airbag will deploy at the samethreshold as a conventional airbag,because the occupant would needextra protection.

If the occupant’s belt , theairbag will inflate at a slightly higherthreshold, when the airbag would beneeded to supplement the protectionprovided by the seat belt.


Dual-Stage Airbags

more severe

less severe

Dual-Threshold Airbags

not latched

is latched


(On models equipped)

If you ever have a moderate tosevere side impact, the sensors willdetect rapid deceleration and signalthe control unit to instantly inflateeither the driver’s or the passenger’sside airbag.Only one airbag will deploy during aside impact. If the impact is on thepassenger’s side, the passenger’sside airbag will deploy even if thereis no passenger.

To get the best protection from theside airbags, front seat occupantsshould wear their seat belts and situpright and well back in their seats.

The passenger’s side airbag has acutoff system designed to turn offthe passenger’s front airbag if achild’s head is in the airbag’sdeployment path (see page ).

If the side airbag off indicator comeson, have the passenger sit upright.Once the passenger is out of thedeployment path of the side airbag,the system will turn the airbag backon and the indicator will go out.

A front seat passenger should notuse a cushion or other object as abackrest. It may prevent the cutoffsystem from working properly.

27



How Your Side Airbags Work

25

If the indicator comes on at anyother time, or does not come on at all,you should have the system checkedby your dealer. For example:

If the SRS indicator does not comeon after you turn the ignitionswitch to ON (II).

If the indicator stays on after theengine starts.

If the indicator comes on orflashes on and off while you drive.

If you see any of these indications,the airbags and seat belt tensionersmay not work properly when youneed them.

The SRS indicator alertsyou to a potential problem

with your front airbags, see sideairbags, or front seat belt tensioners(see page ).

When you turn the ignition to ON(II), this indicator will light brieflythen go out. This tells you that thesystem is working properly.

53



How the SRS Indicator Works

26

Ignoring the SRS indicator lightcan result in serious injury ordeath if the airbag systems, ortensioners do not work properly.

Have your vehicle checked by adealer as soon as possible ifthe SRS indicator alerts you toa possible problem.

(On models equipped)

To reduce the risk of injury from aninflating side airbag, your vehicle hasan automatic cutoff system for thepassenger’s side airbag.

Although Honda does not encouragechildren to ride in front, this systemis designed to shut off the sideairbag if a child leans sideways andthe child’s head is in the side airbagdeployment path.

If a short adult leans sideways, or alarger adult slouches and leanssideways into the side airbagdeployment path, the system mayalso shut off the side airbag.

This indicator alerts youthat the passenger’s side

airbag has been automatically shutoff. It does mean there is aproblem with your side airbags.

To get the best protection from theside airbags, front seat occupantsshould wear their seat belts and situpright and well back in their seats.

When you turn the ignition switch toON (II), the indicator should lightbriefly and go out. If it doesn’t light,stays on, or comes on while drivingwithout a passenger in the front seat,have the system checked.



How the Side Airbag OffIndicator Works

not

27

Your airbag systems are virtuallymaintenance-free, and there are noparts you can safely service.However, you must have yourvehicle serviced if:

Any airbagthat has deployed must bereplaced along with the controlunit and other related parts. If afront airbag inflates the seat belttensioners must also be replaced.Do not try to remove or replaceany airbag by yourself. This mustbe done by a Honda dealer or aknowledgeable body shop.

Together, airbags andseat belts provide the bestprotection.

Tampering could causethe airbags to deploy, possiblycausing very serious injury.

If water or another liquidsoaks into a seat-back, it canprevent the side airbag cutoffsystem from working properly.

Improperlyreplacing or covering front seat-back covers can prevent your sideairbags from inflating during aside impact.

Take your vehicle to anauthorized Honda dealer as soonas possible. If you ignore thisindication, your airbags may notoperate properly.



Airbag Service Additional Safety Precautions

An airbag ever inflates.

Do not attempt to deactivate yourairbags.

Do not tamper with airbagcomponents or wiring for anyreason.

Do not expose the front seat-backsto liquid.

Do not cover or replace front seat-back covers without consulting aHonda dealer.

The SRS indicator alerts you to aproblem.

28

－

Children depend on adults to protectthem. However, despite their bestintentions many adults do not knowhow to properly protect childpassengers.

Each year, many children are injuredor killed in vehicle crashes becausethey are either unrestrained or notproperly restrained. In fact, vehicleaccidents are the number one causeof death of children ages 12 andunder.

If you have children, or if you everneed to drive with a child in yourvehicle, be sure to read this section.It begins with important generalguidelines, then presents specialinformation for infants, smallchildren, and larger children.

To reduce the number of childdeaths and injuries, every state andCanadian province requires thatinfants and children be properlyrestrained when they ride in avehicle.

CONTINUED


All Children Must Be Restrained

Protecting Children General Guidelines

29

Children who are unrestrainedor improperly restrained can beseriously injured or killed in acrash.

Any child too small for a seatbelt should be properlyrestrained in a child seat. Alarger child should be properlyrestrained with a seat belt anduse a booster if necessary.

－

－

－

(see pages ).

According to accident statistics,children of all ages and sizes aresafer when they are restrained in theback seat. The National HighwayTraffic Safety Administration andTransport Canada recommend thatall children age 12 and under beproperly restrained in the back seat.

Children who ride in back are lesslikely to be injured by strikinginterior vehicle parts during acollision or hard braking. Also,children cannot be injured by aninflating airbag when they ride in theback.

Front airbags have been designed tohelp protect adults in a moderate tosevere frontal collision. To do thisthe passenger’s front airbag is quitelarge and it can inflate with enoughforce to cause very serious injuries.

Ifthe airbag inflates, it can hit the backof the child seat with enough forceto kill or very seriously injure aninfant.

If the vehicle seat is toofar forward, or the child’s head isthrown forward during a collision, aninflating front airbag can strike thechild with enough force to kill orvery seriously injure a small child.

Whenever possible,larger children should sit in the backseat, in a booster seat if needed, andbe properly restrained with a seatbelt (see page for importantinformation about protecting largerchildren).

(see pages ).34 35

42 45

42


Larger children must be restrainedwith a lap/shoulder belt and ride ona booster until the seat belt f its themproperly

Never put a rear-facing child seat inthe front seat of a vehicle equippedwith a passenger’s front airbag.

Placing a forward-facing child seat inthe front seat of a vehicle equippedwith passenger’s front airbag can behazardous.

Children who have outgrown childseats are also at risk of being injuredor killed by an inflating passenger’sfront airbag.

Infants and small children must berestrained in an approved child seatthat is properly secured to thevehicle

All Children Should Sit in theBack Seat

The Passenger’s Front AirbagCan Pose Serious Risks

Infants

Small Children

Larger Children


30

－

To remind you of the passenger’sfront airbag hazards, and thatchildren must be properly restrainedin the back seat, your vehicle haswarning labels on the dashboard andon the driver’s and front passenger’svisors. Please read and follow theinstructions on these labels.

To remind you of the front airbaghazards, your vehicle has warninglabels on the driver’s and frontpassenger’s visors. Please read andfollow the instructions on theselabels.


U.S. Models Canadian Models


31

－

Many parents say they prefer to putan infant or small child in the frontpassenger seat so they can watch thechild, or because the child requiresattention.

Placing a child in the front seatexposes the child to hazards in afrontal collision, and paying closeattention to a child distracts thedriver from the important tasks ofdriving, placing both of you at risk.

If a child requires physical attentionor frequent visual contact, westrongly recommend that anotheradult ride with the child in the backseat. The back seat is far safer for achild than the front.

Place the largest child in the frontseat, provided the child is largeenough to wear the lap/shoulderbelt properly (see page ).

Move the vehicle seat as far to therear as possible (see page ).

Have the child sit upright and wellback in the seat (see page ).

Make sure the seat belt is properlypositioned and secured (see page

).

Your vehicle has three seatingpositions in the back seat wherechildren can be properly restrained.If you ever have to carry fourchildren, and a child must ride infront:

11

14

42

30


If You Must Drive with SeveralChildren

If a Child Requires CloseAttention


32

－

Never hold an infant or child onyour lap. If you are not wearing aseat belt in crash, you could bethrown forward and crush thechild against the dashboard or aseat-back. If you are wearing aseat belt the child can be tornfrom your arms and be seriouslyhurt or killed.

Never let two children use thesame seat belt. If they do, theycould be very seriously injured in acrash.

Use childproof door locks toprevent children from opening thedoors. This can prevent childrenfrom accidentally falling out.

Do not leave children alone in avehicle. Leaving children withoutadult supervision is illegal in moststates and Canadian provinces,and can be very hazardous. Forexample, infants and smallchildren left in a vehicle on a hotday can die from heatstroke. Achild left alone with the key in theignition can accidentally set thevehicle in motion, possibly injuringthemselves or others.

Keep vehicle keys and remotetransmitters out of the reach ofchildren. Even very youngchildren learn how to unlockvehicle doors, turn on the ignition,and open the trunk, which canlead to accidental injury or death.

Lock all doors and trunk whenyour vehicle is not in use. Childrenwho play in vehicles canaccidentally get trapped inside thetrunk. Teach your children not toplay in or around vehicles. Knowhow to operate the emergencytrunk opener and decide if yourchildren should be shown how touse this feature (see page ).

Never put a seat belt over yourselfand a child. During a crash, thebelt could press deep into the childand cause serious or fatal injuries.

74


Additional Safety Precautions


33

In this vehicle, a rear-facing childseat can be placed in any seatingposition in the back seat, but not inthe front.Never put a rear-facing child seat inthe front seat. If the passenger’sfront airbag inflates, it can hit theback of the child seat with enoughforce to kill or seriously injure aninfant.

Two types of seats may be used: aseat designed exclusively for infants,or a convertible seat used in the rear-facing, reclining mode.

If placedfacing forward, an infant could bevery seriously injured during afrontal collision.

When properly installed, a rear-facing child seat may prevent thedriver or a front passenger frommoving the seat as far back asrecommended, or from locking theseat-back in the desired position.In either of these situations, westrongly recommend that you installthe child seat directly behind thefront passenger seat, move the frontseat as far forward as needed, andleave it unoccupied. Or you may wishto get a smaller child seat that allowsyou to safely carry a front passenger.

An infant must be properlyrestrained in a rear-facing, recliningchild seat until the child reaches theseat maker’s weight or height limitfor the seat and the child is at leastone year old.

Only a rear-facing child seat providesproper support for a baby’s head,neck, and back.

Protecting Infants and Small Children


Child Seat Placement

Do not put a rear-facing child seat ina forward-facing position.

Child Seat TypeProtecting Infants

34

Placing a rear-facing child seatin the front seat can result inserious injury or death if thepassenger’s front airbag inflates.

Always place a rear-facing childseat in the back seat, not thefront.

We also recommend that a smallchild stay in the child seat as long aspossible, until the child reaches theweight or height limit for the seat.

If it is necessary to put a forward-facing child seat in the front, movethe vehicle seat as far to the rear aspossible, be sure the child seat isfirmly secured to the vehicle, and thechild is properly strapped in the seat.

Of the different seats available, werecommend those that have a five-point harness system as shown.

A child who is at least one year old,and who fits within the child seatmaker’s weight and height limits,should be restrained in a forward-facing, upright child seat.

We strongly recommend placing aforward-facing child seat in a backseat, not the front.

If the vehicle seat is toofar forward, or the child’s head isthrown forward during a collision, aninflating airbag can strike the childwith enough force to cause veryserious or fatal injuries.


Child Seat Placement

Child Seat Type

Placing a forward-facing child seat inthe front seat of a vehicle equippedwith a passenger’s airbag can behazardous.

Protecting Infants and Small Children

Protecting Small Children

35

Placing a forward-facing childseat in the front seat can resultin serious injury or death if thefront airbag inflates.

If you must place a forward-facing child seat in front, movethe vehicle seat as far back aspossible, and properly restrainthe child.

When buying a child seat, you needto choose between a conventionalchild seat, or one designed for usewith the Lower Anchors and Tethersfor Children (LATCH) system.

Since LATCH-compatible child seatsare easier to install and reduce thepossibility of improper installation,we recommend selecting this style.

We also recommend selecting aLATCH-compatible seat with a rigid,rather than a flexible, anchor (seepage ).

Whatever type of seat you choose, toprovide proper protection, a childseat should meet threerequirements:

Look for FMVSS213 or CMVSS 213 on the box.

Rear-facing for infants, forward-facing for small children.

Before purchasing a conventionalchild seat, or using a previouslypurchased one, we recommend thatyou test the seat in the specificvehicle seating position, or positions,where the seat will be used.

Conventional child seats must besecured to a vehicle with a seat belt,whereas LATCH-compatible seatsare secured by attaching the seat tohardware built into the two outerrear seats.

In seating positions and vehicles notequipped with LATCH, a LATCH-compatible child seat can be installedusing a seat belt.

39


The child seat should meet U.S. orCanadian Motor Vehicle SafetyStandard 213.

The child seat should be of theproper type and size to fit the child.

The child seat should fit thevehicle seating position (orpositions) where it will be used.

1.

2.

3.

Selecting a Child Seat

36

After selecting a proper child seat,and a good place to install the seat,there are three main steps ininstalling the seat:

All child seats must besecured to the vehicle with the lappart of a lap/shoulder belt or withthe LATCH (Lower Anchors andTethers for Children) system. Achild whose seat is not properlysecured to the vehicle can beendangered in a crash.

After installing a childseat, push and pull the seatforward and from side to side toverify that it is secure.

A child seat secured with a seat beltshould be installed as firmly aspossible. However, it does not needto be ‘‘rock solid’’. Some side-to-sidemovement can be expected andshould not reduce the child seat’seffectiveness.

If the child seat is not secure, tryinstalling it in a different seatingposition, or use a different style ofchild seat that can be firmly secured.

Make sure the child is properlystrapped in the child seataccording to the child seat maker’sinstructions. A child who is notproperly secured in a child seatcan be seriously injured in a crash.

The following pages provideguidelines on how to properly installa child seat. A forward-facing childseat is used in all examples, but theinstructions are the same for a rear-facing child seat.

Installing a Child Seat


Properly secure the child seat tothe vehicle.

Make sure the child seat is firmlysecured.

Secure the child in the child seat.

1.

2.

3.

37

Your vehicle is equipped withLATCH (Lower Anchors andTethers for Children) at the outerrear seats. The lower anchors arelocated between the seat-back andseat bottom, and are to be used onlywith a child seat designed for usewith LATCH.

Small marks are positioned toindicate the locations of each anchorpoint.

To install a LATCH-compatible childseat:

Move the seat belt buckle ortongue away from the loweranchors.Make sure there are no objectsnear the anchors that couldprevent a secure connectionbetween the child seat andanchors.

1.

2.



Installing a Child Seat UsingLATCH

38

MARKS

LOWER ANCHORS

Place the child seat on the vehicleseat, and attach the seat to thelower anchors according to thechild seat maker’s instructions.

Other LATCH-compatible seats havea flexible-type connection as shownabove.

Whatever type you have, followthe child seat maker’s instructionsfor adjusting or tightening the fit.

Some LATCH-compatible seatshave a rigid-type connection asshown above.

Lift the rear head restraint, thenroute the tether strap over theseat-back between the legs of thehead restraint, making sure thestrap is not twisted.

Attach the tether strap hook to thetether anchor, then tighten thestrap as instructed by the childseat maker.

Push and pull the child seatforward and from side-to-side toverify that it is secure.

6.

5.

3.

4.7.



ANCHORAGEPOINT

TETHER STRAPHOOK

Rigid type Flexible type

Front

When not using the LATCH system,all child seats must be secured to thevehicle with the lap part of a lap/shoulder belt.

In addition, the lap/shoulder belts inthe back seating positions, and in thefront passenger seat, have a lockingmechanism that must be activated tosecure a child seat.

With the child seat in the desiredseating position, route the beltthrough the child seat accordingto the seat maker’s instructions,then insert the latch plate into thebuckle.

To activate the lockable retractor,slowly pull the shoulder part of thebelt all the way out until it stops,then let the belt feed back into theretractor.

After the belt has retracted, tug onit. If the belt is locked, you will notbe able to pull it out. If you can pullthe belt out, it is not locked andyou will need to repeat these steps.

1. 2.

3.



Installing a Child Seat with a Lap/Shoulder Belt

40

After confirming that the belt islocked, then grab the shoulderpart of the belt near the buckleand pull up to remove any slackfrom the lap part of the belt.Remember, if the lap part of thebelt is not tight, the child seat willnot be secure.

Push and pull the child seatforward and from side to side toverify that it is firmly secured. Ifthe child seat is not secure,unlatch the belt, allow it to retractfully, then repeat these steps.

To deactivate the lockingmechanism and remove a child seat,unlatch the buckle, unroute the seatbelt, and let the belt fully retract.

A child seat with a tether can beinstalled in any seating position inthe back seat, using one of theanchorage points shown above.

Since a tether can provide additionalsecurity to the lap/shoulder beltinstallation, we recommend using atether whenever one is required oravailable. (Tethers are required inCanada.)

To remove slack, it may help toput weight on the child seat, orpush on the back of the seat whilepulling up on the belt.

4. 5.



Installing a Child Seat with aTether

41

COVER

ANCHORAGE POINT

When a child reaches therecommended weight or height limitfor a forward-facing child seat, thechild should sit in a back seat on abooster and wear a lap/shoulder belt.The following pages giveinstructions on how to check properseat belt fit, what kind of boosterseat to use if one is needed, andimportant precautions for a childwho must sit in front.

Lift the anchor point lid, thenattach the tether strap hook to theanchor, making sure the strap isnot twisted.Tighten the strap according to theseat maker’s instructions.

Attach the tether strap hook to theanchor, making sure the strap isnot twisted, then tighten the strapaccording to the seat-maker’sinstructions.

After properly securing the childseat with the lap/shoulder belt(see page ), route the tetherstrap over the top of the seat-back.

After securing the child seat in thedesired position (see pages and

), lift the head restraint, thenroute the tether strap over the topof the seat-back and through thehead restraint legs.

1.

2.

1.

3.

2.

40

3435

Installing a Child Seat, Protecting Larger Children


Using an Outer Anchorage Point Protecting Larger ChildrenUsing the Center AnchoragePoint

42

TETHER STRAPHOOK

ANCHORAGEPOINT

FrontFront TETHER STRAPHOOK

ANCHORAGEPOINT

Allowing a large child age 12 orunder to sit in front can result ininjury or death if the passenger’sfront airbag inflates.

If a large child must ride in front,move the vehicle seat as farback as possible, use a boosterseat if needed, have the childsit up properly and wear theseat belt properly.

To determine if a lap/shoulder beltproperly fits a child, have the childput on the seat belt, then askyourself:

Does the child sit all the way backagainst the seat?

Do the child’s knees bendcomfortably over the edge of theseat?

Does the shoulder belt crossbetween the child’s neck and arm?

Is the lap part of the belt as low aspossible, touching the child’sthighs?

Will the child be able to stayseated like this for the whole trip?

If you answer yes to all thesequestions, the child is ready to wearthe lap/shoulder belt correctly. Ifyou answer no to any question, thechild needs to ride on a booster seat. A child who has outgrown a forward-

facing child seat should ride in aback seat and use a booster seatuntil the lap/shoulder belt fits themproperly without the booster.

1.

2.

3.

4.

5.

CONTINUED

Protecting Larger Children


Checking Seat Belt Fit Using a Booster Seat

43

Some states also require children touse a booster until they reach agiven age or weight (e.g., 6 years or60 lbs). Be sure to check currentlaws in the state or states where youintend to drive.

Booster seats can be high-back orlow-back. Whichever style you select,make sure the booster meets federalsafety standards and that you followthe booster seat maker’s instructions.

The National Highway Traffic SafetyAdministration and TransportCanada recommend that all childrenages 12 and under be properlyrestrained in the back seat.

If the passenger’s front airbaginflates in a moderate to severefrontal collision, the airbag can causeserious injuries to a child who isunrestrained, improperly restrained,sitting too close to the airbag, or outof position.

The side airbag also poses risks. Ifany part of a larger child’s body is inthe path of a deploying side airbag,the child could receive possiblyserious injuries.

A child may continue using a boosterseat until the tops of their ears areeven with the top of the vehicle’s orbooster’s seat-back. A child of thisheight should be tall enough to usethe lap/shoulder belt without abooster.

If a child who uses a booster must bein front, move the vehicle seat as farback as possible and be sure thechild is wearing the seat beltproperly.



When Can a Larger Child Sit in Front

44

If you decide that a child can safelyride up front, be sure to:

Carefully read the owner’s manualand make sure you understand allseat belt instructions and all safetyinformation.

Move the vehicle seat to the rear-most position.

Have the child sit up straight, backagainst the seat, and feet on ornear the floor.

Check that the child’s seat belt isproperly positioned and secured.

This could result inserious neck injuries during a crash.

This could causevery serious injuries during a crash.It also increases the chance that thechild will slide under the belt in acrash and be injured.

If they do, they couldbe very seriously injured in a crash.

Devices intended to improve achild’s comfort or reposition theshoulder part of a seat belt can makethe belt less effective, and increasethe chance of serious injury in acrash.

Of course, children vary widely. Andwhile age may be one indicator ofwhen a child can safely ride in thefront. There are other importantfactors you should consider.

To safely ride in front, a child mustbe able to follow the rules, includingsitting properly, and wearing the seatbelt properly throughout a ride.

Physically, a child must be largeenough for the lap/shoulder belt toproperly fit (see page ). If the seatbelt does not fit properly, with orwithout the child sitting on a booster,the child should not sit in the front. Supervise the child. Even mature

children sometimes need to bereminded to fasten the seat beltsor sit properly.

43



Additional Safety PrecautionsDo not let a child wear a seat beltacross the neck.

Do not let a child put the shoulderpart of a seat belt behind the back orunder the arm.

Two children should never use thesame seat belt.

Do not put any accessories on a seatbelt.

Maturity

Physical Size

45

Your vehicle’s exhaust containscarbon monoxide gas. You shouldhave no problem with carbonmonoxide entering the vehicle innormal driving if you maintain yourvehicle properly.

High levels of carbon monoxide cancollect rapidly in enclosed areas,such as a garage. Do not run theengine with the garage door closed.Even with the door open, run theengine only long enough to move thevehicle out of the garage.

With the trunk lid open, air flow canpull exhaust gas into your vehicle’sinterior and create a hazardouscondition. If you must drive with thetrunk lid open, open all the windowsand set the heating and coolingsystem as shown below.

If you must sit in your parked vehicle,even in an unconfined area, with theengine running, adjust the heatingand cooling system as follows:

Select the Fresh Air mode.Select the mode.Turn the fan on high speed.Set the temperature control to acomfortable setting.

Have the exhaust system inspectedfor leaks whenever:

The vehicle is raised for an oilchange.You notice a change in the soundof the exhaust.The vehicle was in an accidentthat may have damaged the under-side.

1.2.3.4.

Carbon Monoxide Hazard


Carbon monoxide gas is toxic.Breathing it can causeunconsciousness and even killyou.

Avoid any enclosed areas oractivities that expose you tocarbon monoxide.

These labels are in the locationsshown. They warn you of potentialhazards that could cause seriousinjury. Read these labels carefully. Ifa label comes off or becomes hard toread, contact your Honda dealer fora replacement.

CONTINUED

U.S. models

Canadian models

U.S. models only

Safety Labels


RADIATOR CAP

SUN VISORDASHBOARD

On models without side airbags

On models with side airbags

Safety Labels


HOOD

This section gives information aboutthe controls and displays thatcontribute to the daily operation ofyour Honda. All the essentialcontrols are within easy reach.

...........................Control Locations . 50............................Instrument Panel . 51

.............................................Gauges . 59.....................................Odometer . 60...................................Trip Meter . 60

.................Current Fuel Mileage . 60................................Trip Mileage . 60

Turning Off the Mileage.....................................Display . 61

..................................Fuel Gauge . 61.........IMA Battery Level Gauge . 62

................Charge/Assist Gauge . 63...................Temperature Gauge . 63

Controls Near the Steering...........................................Wheel . 64

.Windshield Wipers and Washers . 65...........Turn Signal and Headlights . 66

........Instrument Panel Brightness . 67.................Hazard Warning Button . 67.................Rear Window Defogger . 68

..........Steering Wheel Adjustment . 69...............................Keys and Locks . 70

........................Immobilizer System . 71................................Ignition Switch . 72

......................................Door Locks . 73..................................Door Locks . 73

......................Power Door Locks . 73..............Childproof Door Locks . 73

...........................................Trunk . 74........Emergency Trunk Opener . 74

.......................Remote Transmitter . 75.................................................Seats . 77

..............................Power Windows . 79.............................................Mirrors . 81

.................................Parking Brake . 82

.................................Interior Lights . 83...........Interior Convenience Items . 84

.......................Beverage Holders . 85..........Accessory Power Sockets . 85

....................................Glove Box . 85...............Console Compartment . 85

Instruments and Controls

Instruments and Controls 49

AT model is shown.

Control Locations

Instruments and Controls50

HEATING/COOLING CONTROLS

FUEL FILL DOOR RELEASE

TRUNK RELEASE

CRUISE CONTROL SWITCHES


POWER DOOR LOCKSWITCH

MIRRORCONTROLS

HOOD RELEASEHANDLE

POWER WINDOWSWITCHES

AUDIO SYSTEM

DIGITAL CLOCK

(P. 88)

ACCESSORY POWERSOCKET

(P. 109)

(P. 117)(P. 74)

(P. 115)

(P. 109)

(P. 73)

(P. 94)

(P. 108)

(P. 81)

(P. 79)

(P. 85)

＊

＊The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.

Instrument Panel


Automatic Transmission(CVT)

51

CRUISE CONTROL INDICATOR

SIDE AIRBAG OFF INDICATOR

CHARGING SYSTEMINDICATOR

AUTO IDLE STOPINDICATOR

MALFUNCTION INDICATOR LAMP

ELECTRIC POWER STEERING(EPS)INDICATOR

SHIFT LEVER POSITIONINDICATOR

LOW FUEL INDICATOR

MAINTENANCE REQUIRED INDICATOR

PARKING BRAKE AND BRAKESYSTEM INDICATOR

SUPPLEMENTAL RESTRAINTSYSTEM INDICATOR

IMMOBILIZER SYSTEM INDICATOR

HIGH BEAM INDICATOR

TRUNK-OPEN INDICATOR

IMA SYSTEMINDICATOR

LOW OIL PRESSURE INDICATOR

(P. 56)

(P. 56)

(P. 53)

(P. 53)

(P. 53)

(P. 54, 191)

(P. 137)

(P. 55)

(P. 54, 190)(P. 55)

(P. 133)(P. 56)

(P. 55)

(P. 56)

(P. 54)

(P. 58)

(P. 54)

SEAT BELT INDICATOR

ANTI-LOCK BRAKESYSTEM INDICATOR

(P. 192)

Instrument Panel


Manual Transmission

52

CRUISE CONTROL INDICATOR

SIDE AIRBAG OFF INDICATOR

CHARGING SYSTEMINDICATOR

AUTO IDLE STOPINDICATOR

MALFUNCTION INDICATOR LAMP

LOW OIL PRESSURE INDICATOR ELECTRIC POWER STEERING(EPS)INDICATOR

LOW FUEL INDICATOR

MAINTENANCE REQUIRED INDICATOR

SUPPLEMENTAL RESTRAINTSYSTEM INDICATOR

IMMOBILIZER SYSTEM INDICATOR

HIGH BEAM INDICATOR

TRUNK-OPEN INDICATORSHIFT UP/SHIFT DOWNINDICATORS

IMA SYSTEMINDICATOR

(P. 56)

(P. 56)

(P. 53)

(P. 53)

(P. 53)

(P. 54, 191)

(P. 132)

(P. 55)

(P. 55)

(P. 132)(P. 56)

(P. 55)

(P. 56)

(P. 54)

(P. 58)

(P. 54)

(P. 54, 190)

SEAT BELT INDICATOR

PARKING BRAKE AND BRAKESYSTEM INDICATOR

ANTI-LOCK BRAKESYSTEM INDICATOR

(P. 192)

Only on models equipped with sideairbags

The instrument panel has manyindicators to give you importantinformation about your vehicle. This indicator comes on when you

turn the ignition switch to ON (II). Ifit comes on at any other time, itindicates a potential problem withyour front airbags. This indicator willalso alert you to a potential problemwith your side airbags, passenger’sside airbag automatic cutoff system,or automatic seat belt tensioners.For more information, see page .

This indicator comes on when youturn the ignition switch to ON (II). Ifit comes on at any other time, itindicates that the passenger’s sideairbag has automatically shut off.For more information, see page .

The seat belt system includes anindicator on the instrument paneland a beeper to remind you and yourpassengers to fasten your seat belts.

If you turn the ignition switch to ON(II) before fastening your belt, thebeeper sounds and the indicatorflashes. If you do not fasten yourseat belt before the beeper stops, theindicator stops flashing but remainson.

If you continue driving withoutfastening your seat belt, the beepersounds and the indicator flashesagain at regular intervals.

26

27

Supplemental RestraintSystem Indicator

Side Airbag Off Indicator

Seat Belt Indicator


Instrument Panel

53

The engine can be severely damagedif this indicator flashes or stays onwhen the engine is running. Forcomplete information, see page .

This indicator has two functions:

If it remains lit after you have fullyreleased the parking brake whilethe engine is running, or if itcomes on while driving, therecould be a problem with the brakesystem. For complete information,see page .

It comes on when you turn theignition switch to ON (II). It is areminder to check the parkingbrake. Driving with the parkingbrake not fully released candamage the brakes and tires.

See page .

If this indicator comes on when theengine is running, the 12 volt batteryis not being charged. For completeinformation, see page .

This indicator normally comes on fora few seconds when you turn theignition switch to ON (II), and whenthe ignition switch is turned toSTART (III). If it comes on at anyother time, there is a problem in theABS. If this happens, have yourvehicle checked at a dealer. Withthis indicator on, your vehicle stillhas normal braking ability but noanti-lock. For complete information,see page .

1.

2.190

191

141

193

192

If equipped

Charging SystemIndicator

Low Oil PressureIndicator

Parking Brakeand BrakeSystemIndicator

Anti-lock Brake System(ABS) Indicator

Malfunction IndicatorLamp


Instrument Panel

54

U.S. Canada

This indicator normally comes onwhen you turn the ignition to ON (II)and goes off after the engine starts.If it comes on at any other time,there is a problem in the ElectricPower Steering system. If thishappens, stop the vehicle in a safeplace and turn off the engine. Resetthe system by restarting the engine.The indicator will not turn offimmediately. If it does not go offafter driving a short distance, orcomes back on again while driving,take the vehicle to your dealer tohave it checked. With the indicatoron, the EPS may be turned off,making the vehicle harder to steer.

This indicator normally comes on fora few seconds when you turn theignition switch to ON (II). If it comeson at any other time, it indicates aproblem in the Integrated MotorAssist (IMA) system. With the IMAindicator on, the vehicle may notaccelerate as it normally does. Havethe vehicle checked by the dealer assoon as possible.

See pages and .

If you drive with the systemoverheated continuously orrepeatedly, this can damage thepower steering system.

If the power steering systemoverheats while driving, the assistingpower is reduced and steering mayfeel slightly harder.

This indicator comes on for a fewseconds when you turn the ignitionswitch to ON (II). It will then go offif you have inserted a properly-codedignition key. If it is not a properly-coded key, the indicator will blinkand the engine will not start (seepage ).

This indicator also blinks severaltimes when you turn the ignitionswitch from ON (II) to ACCESSORY(I) or LOCK (0).

71 132 137


Electric Power Steering(EPS) Indicator

IMA System Indicator

Auto Idle Stop Indicator

Immobilizer SystemIndicator

Instrument Panel

55

This indicator comes on with thehigh beam headlights. See page

for information on the headlightcontrols.

On Canadian models, this indicatorcomes on with reduced brightnesswhen the Daytime Running Lights(DRL) are on (see page ).

This indicator comes on if the trunklid is not closed tightly.

This indicator comes on as areminder that you must refuel soon.

This indicator comes on when thewasher fluid level is low. Add washerfluid when you see this indicatorcome on (see page ).

This indicator comes on when youset the cruise control. See page

for information on operating thecruise control.

The left or right turn signal indicatorblinks when you signal a lane changeor turn. If the indicators do not blinkor blink rapidly, it usually means oneof the turn signal bulbs is burned out(see page ). Replace the bulb assoon as possible, since other driverscannot see that you are signaling.

When you turn on the HazardWarning button, both turn signalindicators blink. All turn signals onthe outside of the vehicle shouldflash.

56

56

109 157

162

Canadian models only

High Beam Indicator

Cruise Control Indicator

Trunk-open Indicator

Low Fuel Indicator

Washer Level Indicator

Turn Signal andHazard WarningIndicators


Instrument Panel

56

Canadian models onlyManual Transmission

Automatic Transmission (CVT)

This indicator comes on when youturn the ignition switch to ON (II)with the headlight switch off and theparking brake set. It should go off ifyou turn on the headlights or releasethe parking brake. If it comes on atany other time, it means there is aproblem with the DRL. There mayalso be a problem with the highbeam headlights.

See page .

See page .

132

133


‘‘Daytime RunningLights’’ Indicator

Shift Up/Shift Down Indicators

Shift Lever Position Indicator

Instrument Panel

57

Between 8,000 miles (12,800 km)and 10,000 miles (16,000 km), it willcome on for two seconds when youfirst turn the ignition switch to ON(II), and then flash for 10 seconds.

This indicator reminds you that it istime to take your vehicle in forscheduled maintenance.Refer to the Maintenance Schedulesfor Normal and Severe DrivingConditions on pages and .

For the first 8,000 miles (12,800 km)after the Maintenance RequiredIndicator is reset, it will come on fortwo seconds when you turn theignition switch to ON (II).

Your dealer will reset this indicatorafter completing the scheduledmaintenance. If this maintenance isnot done by a Honda dealer, resetthe light as follows.

Press and hold the Select/Resetknob in the instrument panel, thenturn the ignition switch to ON (II).

Hold the knob for about tenseconds until the light goes off.Turn off the engine.

If you exceed 10,000 miles (16,000km) without having the scheduledmaintenance performed, thisindicator will remain on as a constantreminder.

1.

2.

3.

147 148


Maintenance RequiredIndicator

Instrument Panel

58

SELECT/RESET KNOB

Gauges

Automatic Transmission (CVT) is shown


TACHOMETER

SPEEDOMETER

ODOMETER/TRIP METER FUEL GAUGE

IMA CHARGE/ASSIST GAUGE

FUEL MILEAGE DISPLAY

CURRENT FUEL MILEAGE DISPLAY

TEMPERATURE GAUGE

IMA BATTERY LEVEL GAUGE

The U.S. instrument panel is shown

SELECT/RESETKNOB

The trip meter shows the number ofmiles (U.S.) or kilometers (Canada)driven since you last reset it.

There are two trip meters: Trip Aand Trip B. Each trip meter worksindependently, so you can keep trackof two different distances.

To reset a trip meter, display it andthen press and hold the Select/Resetknob until the number resets to ‘‘0.0’’.

The odometer and the trip metersuse the same display. Switch thesedisplays by pressing the Select/Reset knob.

The odometer shows the total dis-tance your vehicle has been driven.It measures miles in U.S. models andkilometers in Canadian models.It is illegal under U.S. federal law andCanadian provincial regulations todisconnect, reset, or alter theodometer with the intent to changethe number of miles or kilometersindicated.

This display shows the current, orinstantaneous fuel mileage you aregetting.

It shows the number of mpg (U.S.)or l/100 km (Canada).

You can turn off this display at anytime. See page .

When a trip meter is displayed, theaverage fuel mileage you have beengetting during that trip is shown inthe Fuel Mileage display. Thisnumber is updated once per tenseconds.

When you reset a trip meter, theaverage fuel mileage for that tripmeter also resets.

61Trip Meter

Current Fuel Mileage

Trip Mileage

Odometer


Gauges

60

TRIP MILEAGE (TRIPA)

U.S. Model is shown

You can temporarily turn off theCurrent Fuel Mileage display.

This shows how much fuel you have.It may show slightly more or lessthan the actual amount.

Turn the ignition switch to ON (II)and make sure the transmission isin Neutral (manual) or Park(automatic) and the parking brakeis set.

Use the Select/Reset button toselect the odometer display.

Press and hold the Select/Resetbutton for about 10 to 15 seconds,then release it. The Current FuelMileage display will turn off.

The display will turn back on whenyou repeat the same procedure instep 3.

1.

3.

2.

Gauges


Turning Off the Mileage Display Fuel Gauge

61

Avoid driving with an extremely lowf uel level. Running out of f uel couldcause the engine to misf ire, damagingthe catalytic converter.

This gauge shows you the state ofcharge of the battery for theIntegrated Motor Assist (IMA). Thisbattery is recharged by the engine,and discharged by the IMA when itis assisting the engine with poweringthe vehicle.

The gauge reading may drop nearthe bottom under driving conditionsthat require assist for a long time,such as prolonged acceleration or

climbing a long hill. The engine willrecharge the battery as you continuedriving.

If the battery is mostly discharged,the Auto Idle Stop function isdisabled (see pages and ).

The battery level gauge does notread the battery level directly. Itcalculates the level by continuouslymeasuring the current flow, voltage,and temperature.

Since the level is not read directly,small sensing errors can, over time,cause the gauge to read higher thanthe actual battery level. The systemwill then perform a correction, andthe battery level gauge reading willdrop suddenly. When this happens,IMA assist and Auto Idle Stop aredisabled until the IMA battery issufficiently recharged by normaldriving. This should take only a fewminutes.

This correction of the battery levelgauge is normal and does notindicate a problem. If the IMAbattery develops a problem orbecomes deteriorated, the IMAsystem indicator will come on. If thishappens, have the vehicle checkedby your dealer as soon as possible.

137131

IMA Battery Level Gauge

Gauges


IMA BATTERY LEVEL GAUGE

If the IMA battery is too hot or toocold, the IMA system shuts down toprotect the battery. This disables theIMA assist and Auto Idle Stop, eventhough the Battery Level Gauge mayshow that the battery is well-charged.Therefore, those functions may notoperate when you first start drivingin very hot or cold weather.

This shows the temperature of theengine’s coolant. During normaloperation, the reading should be inthe middle of the gauge. In severedriving conditions, the reading mayreach near the red mark. If itreaches the red (Hot) mark, pullsafely to the side of the road. Turn topage for instructions andprecautions on checking the engine’scooling system.

The battery temperature willnormalize after a few minutes ofdriving, and the IMA system willwork normally.

This gauge shows you the status ofthe Integrated Motor Assist (IMA).When the IMA battery is beingcharged, the left side of the gaugeilluminates. When the IMA isassisting the engine, the right side ofthe gauge illuminates.

187

Charge/Assist Gauge Temperature Gauge

Gauges


IMA CHARGEGAUGE

IMA ASSISTGAUGE

Controls Near the Steering Wheel


MIRROR CONTROLS

HEADLIGHTS/TURN SIGNALS

CRUISE CONTROLSWITCHES

WINDSHIELDWIPERS/WASHERS

REAR WINDOWDEFOGGER

ECON BUTTON


STEERING WHEELADJUSTMENT

HAZARD WARNINGBUTTON

HORN

－－－

－

－

－

－

－

－

MISTOFFINT IntermittentLO LowHI HighWindshield Washers

Push the right lever up or down toselect a position.

The wipers are not activated.

The wipers run at highspeed until you release the lever.

Pull thewiper control lever toward you andhold it. The washers spray untilyou release the lever. The wipersrun at low speed, then completeone more sweep after you releasethe lever.

The wipers operate everyfew seconds. In low speed andhigh speed, the wipers runcontinuously.

Vary the delay by turning the INTTIME ring.

The wipers run at low speed.

The wipers run at high speed.

1.2.3.4.5.6.

If equipped

OFF

MIST

Windshield Washer

INT

LO

HI

Windshield Wipers and Washers


－－

－

Push down on theleft lever to signal a left turn and upto signal a right turn. To signal a lanechange, push lightly on the lever andhold it. The lever will return tocenter when you release it orcomplete a turn.

To turn on, pushthe lever forward until you hear aclick. The blue high beam indicatorwill light (see page ). Pull it backto return to low beams. To flash thehigh beams, pull the lever backlightly, then release it. The highbeams will stay on as long as youhold the lever back.

The headlights revert to normaloperation when you turn them onwith the switch.

Rotating switchon the left lever controls to the‘‘ ’’ position turns on the parkinglights, taillights, instrument panellights, side-marker lights, and rearlicense plate lights. Turning theswitch to the ‘‘ ’’ position turnson the headlights. If you leave thelights on with the ignition switch inACCESSORY (I) or LOCK (0), youwill hear a reminder tone when youopen the driver’s door.

With the headlight switch off, thehigh beam headlights come on withreduced brightness when you turnthe ignition switch to ON (II) andrelease the parking brake. Theyremain on until you turn the ignitionoff, even if you set the parking brake.

Turn SignalOffParking and interior lightsHeadlight onHigh beamsFlash high beams

1.2.3.4.5.6.

56

Canadian models only

Turn Signal High Beams

Daytime Running Lights

Headlights On

Turn Signal and Headlights


Push the button between the centervents to turn on the hazard warninglights (four-way flashers). Thiscauses all four outside turn signalsand both indicators in the instrumentpanel to flash. Use the hazardwarning lights if you need to park ina dangerous area near heavy traffic,or if your vehicle is disabled.

The knob on the instrument panelcontrols the brightness of the instru-ment panel lights. Turn the knob toadjust the brightness.

When you turn the knob, theodometer/trip meter displaychanges to circles that show you thecurrent level. You will hear a tonewhen you reach the maximum orminimum brightness. The displayreturns to the odometer/trip meter

values five seconds after you stopadjusting the knob.

Adjust the brightness to the desiredlevel with the headlight switch off,and also with the headlight switch on.

To reduce glare at night, theinstrument panel illumination dimswhen you turn the light switch to

or . Turning the Select/Reset knob fully to the right willreturn the instrument panel to thebrightness adjusted with theheadlight switch off and a tone willsound.

Instrument Panel Brightness Hazard Warning Button

Instrument Panel Brightness, Hazard Warning Button


KNOB

Make sure the rear window is clearand you have good visibility beforestarting to drive.

The defogger and antenna wires onthe inside of the rear window can beaccidentally damaged. Whencleaning the glass, always wipe sideto side.

The rear window defogger will clearfog, frost, and thin ice from thewindow. Push the defogger button toturn it on and off. The light in thebutton lights to show the defogger ison. If you do not turn it off, thedefogger will shut itself off afterabout 15 minutes. It also shuts offwhen you turn off the ignition. Youhave to turn it on again when yourestart the vehicle.

Rear Window Defogger


See page for important safetyinformation about how to properlyposition the steering wheel.

16

Make any steering wheel adjustmentbefore you start driving.

To adjust the steering wheel upwardor downward:

Push the lever under the steeringcolumn all the way down.

Push the lever up to lock thesteering wheel in that position.

Make sure you have securelylocked the steering wheel in placeby trying to move it up and down.

Move the steering wheel so itpoints to your chest, not towardyour face. Make sure you can seethe instrument panel gauges andindicators.

1.

4.

2.

3.

Steering Wheel Adjustment


Adjusting the steering wheelposition while driving maycause you to lose control of thevehicle and be seriously injuredin a crash.

Adjust the steering wheel onlywhen the vehicle is stopped.

You should have received a keynumber tag with your set of keys.You will need this key number if youever have to get a key replaced. Useonly Honda-approved key blanks.

These keys contain electroniccircuits that are activated by theImmobilizer System. They will notwork to start the engine if thecircuits are damaged.

Protect the keys from directsunlight, high temperature, andhigh humidity.

Do not drop the keys or set heavyobjects on them.

Keep the keys away from liquids.If they get wet, dry themimmediately with a soft cloth.

The keys do not contain batteries.Do not try to take them apart.

The master key fits all the locks onyour vehicle.

The valet key works only in theignition and the door locks. You cankeep the trunk and trunk releasehandle locked when you leave yourvehicle and the valet key at a parkingfacility.

Keys and Locks


MASTERKEYS(Black)

VALETKEY(Gray)

KEYNUMBERTAG

The Immobilizer System protectsyour vehicle from theft. If animproperly-coded key (or otherdevice) is used, the engine’s fuelsystem is disabled.

If the system repeatedly does notrecognize the coding of your key,contact your Honda dealer.

Do not attempt to alter this systemor add other devices to it. Electricalproblems could result that may makeyour vehicle undriveable.

If you have lost your key and cannotstart your engine, contact a Hondadealer.

When you turn the ignition switch toON (II), the Immobilizer Systemindicator should come on for a fewseconds, then go out. If the indicatorstarts to blink, it means the systemdoes not recognize the coding of thekey. Turn the ignition switch toLOCK (0), remove the key, reinsertit, and turn the switch to ON (II)again.

The system may not recognize yourkey’s coding if another immobilizerkey or other metal object (i.e. keyfob) is near the ignition switch whenyou insert the key.

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.

Immobilizer System


－

－－

－

The ignition switch has fourpositions: LOCK (0), ACCESSORY(I), ON (II), and START (III).

If the front wheels are turned, theanti-theft lock may make it difficultto turn the key. Firmly turn thesteering wheel to the left or right asyou turn the key.

You canoperate the audio system and theaccessory power sockets in thisposition.

Use this positiononly to start the engine. The switchreturns to ON (II) when you let go ofthe key.

You will hear a reminder beeper ifyou leave the key in the ignitionswitch in the LOCK (0) orACCESSORY (I) position and openthe driver’s door. Remove the key toturn off the beeper.

You can insert orremove the key only in this position.To turn the key, you must push thekey in slightly. If your vehicle has anautomatic transmission, the shiftlever must also be in park.

If your vehicle has an automatictransmission, the shift lever must bein Park before you can remove thekey from the ignition switch.

This is the normal keyposition when driving. Several of theindicators on the instrument panelcome on as a test when you turn theignition switch from ACCESSORY(I) to ON (II).

ACCESSORY (I)

START (III)LOCK (0)

ON (II)

Ignition Switch


Removing the key from theignition switch while drivinglocks the steering. This cancause you to lose control.

Remove the key from theignition switch only whenparked.

Each door has a lock tab on the top.Push the tab down to lock the doorand pull it up to unlock.

The childproof door locks aredesigned to prevent children seatedin the rear from accidentally openingthe rear doors. Each rear door has alock lever near the edge. With thelever in the LOCK position, the doorcannot be opened from the insideregardless of the position of the locktab. To open the door, pull the locktab up and use the outside doorhandle.

To lock any passenger’s door whengetting out of the vehicle, push thelock tab down and close the door. Tolock the driver’s door, pull and holdthe outside door handle then pushthe lock tab down. Release thehandle, then close the door.

All doors lock when you push downthe lock tab on the driver’s door, orlock the driver’s door from theoutside with the key. Only the driver’sdoor unlocks when you use the keyor lock tab. To unlock the passen-gers’ doors, use the master door lockswitch or the lock tab on each door.

Door Locks Power Door Locks Childproof Door Locks

Door Locks


Unlock

Lock

Unlock

Lock

MASTER DOOR LOCK SWITCH

LEVER

To open the trunk, pull the trunkrelease handle to the left of thedriver’s seat. To protect items in thetrunk when you need to give the keyto someone else, lock the trunkrelease handle with the master keyand give the other person the valetkey.

To close the trunk, press down onthe trunk lid.

You can also use the master key toopen the trunk lock.

Keep the trunk lid closed at all timeswhile driving to avoid damaging itand to prevent exhaust gas fromgetting into the interior. See CarbonMonoxide Hazard, page .

Parents should decide if theirchildren should be shown how to usethis feature.

As a safety feature, your vehicle hasa release lever on the trunk latch sothe trunk can be opened from inside.To open the trunk, push the releaselever to the left.

46

Trunk Emergency Trunk Opener

Door Locks


TRUNK RELEASE HANDLE

Pull

MASTER KEYMASTER KEY

－

－

－

Press this button onceto unlock the driver’s door. Push ittwice to unlock the other doors. Ifyou do not open any doors within 30seconds, they will automaticallyrelock.

Press this button forabout one second to attract attention;the horn will sound and the exteriorlights will flash for about 30 seconds.To cancel panic mode, press anyother button on the remotetransmitter or turn the ignitionswitch to ON (II).

Avoid dropping or throwing thetransmitter.Protect the transmitter fromextreme temperatures.Do not immerse the transmitter inany liquid.If you lose a transmitter, thereplacement needs to bereprogrammed by a Honda dealer.

Press this button once tolock all doors. Some exterior lightswill flash. When you push LOCKtwice within 5 seconds, you will heara beep to verify that the doors arelocked. You cannot lock it if any dooris not fully closed or the key is in theignition switch.

UNLOCK

PANIC

LOCK

Remote Transmitter Care

Remote Transmitter


UNLOCKBUTTON

LED LOCKBUTTON

PANICBUTTON

＋▽

◎

If it takes several pushes on thebutton to lock or unlock the doors,replace the battery as soon aspossible.Battery type: CR2025

To replace the battery, move theround cover on the back of thetransmitter by turning itcounterclockwise with a coin. Inserta new battery with the side facingup. Align the mark on the coverwith the mark on thetransmitter. Set the cover in placeand turn it clockwise.

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.

Replacing the TransmitterBattery

Remote Transmitter


ROUNDCOVER

CUSHIONRING

BATTERY

－See pages for important safetyinformation and warnings about how toproperly position seats and seat-backs.

11 13

Make all adjustments before youstart driving.

To adjust the seat forward andbackward, pull up on the bar underthe seat cushion’s front edge. Thentry to move the seat to make sure itis locked in position.

To change the seat-back angle of thefront seat, pull up on the lever on theoutside of the seat bottom.

Front Seat Adjustments

Seats


See page for important safetyinformation and a warning about how toproperly position the head restraints.

14The head restraints help protect youand your passengers from whiplashand other injuries. They are mosteffective when you adjust them sothe back of the occupant’s head restsagainst the center of the restraint.

The head restraints in the front andrear outboard seating positionsadjust for height. You need bothhands to adjust the restraint. Toraise it, pull upward. To lower therestraint, push the release buttonsideways and push the restraintdown.

Your vehicle is equipped with headrestraints in the front seats and theoutboard seating positions in therear.

To adjust the height of the driver’sseat, turn the dial on the outside ofthe seat bottom.

Driver’s Seat Height Adjustment Head Restraints

Seats


FRONT

RELEASE BUTTON

－

The master control panel also con-tains these extra features:

To open the driver’swindow fully, push the windowswitch firmly down and release it.The window automatically goes allthe way down. To stop the windowfrom going all the way down, pullback on the window switch briefly.

To open the driver’s window onlypartially, push the window switchdown lightly and hold it. The windowwill stop as soon as you release theswitch.

The AUTO function only works tolower the driver’s window. To raisethe window, you must pull back onthe window switch and hold it untilthe window reaches the desiredposition.

Turn the ignition switch to ON (II)to raise or lower any window. Toopen the window, push the switchdown and hold it. Release the switchwhen you want the window to stop.Pull back on the switch and hold it toclose the window.

CONTINUED

AUTO

Power Windows


DRIVER’S WINDOW SWITCH

MAIN SWITCH

Closing a power window onsomeone’s hands or fingers cancause serious injury.

Make sure your passengers areaway from the windows beforeclosing them.

The light in the AUTO switch comeson when you turn the ignition switchto ON (II).

The MAIN switch controls power tothe passengers’ windows. When youpush in the MAIN switch, thepassengers’ windows cannot beraised or lowered. The MAIN switchdoes not affect the driver’s window.To cancel this feature, push on theswitch again to get it to pop out.Keep the MAIN switch pushed inwhen you have children in thevehicle so they do not injurethemselves by operating thewindows unintentionally.

Power Windows


Keep the inside and outside mirrorsclean and adjusted for best visibility.Be sure to adjust the mirrors beforeyou start driving.

The inside mirror has day and nightpositions. The night position reducesglare from headlights behind you.Flip the tab on the bottom edge ofthe mirror to select the day or nightposition.

Move the selector switch to L(driver’s side) or R (passenger’sside).

Push the appropriate edge of theadjustment switch to move themirror right, left, up, or down.

When you finish, move theselector switch to the center (off)position. This turns off theadjustment switch so you can’tmove a mirror out of position byaccidentally bumping the switch.

1.

2.

3.

CONTINUED

Mirrors


Adjusting the Power Mirrors

81

SELECTOR SWITCH

TAB

ADJUSTMENT SWITCH

The outside mirrors are heated toremove fog and frost. With theignition switch in the ON (II)position, turn on the heaters bypressing the button. The indicator inthe button comes on as a reminder.Press the button again to turn theheaters off.

To apply the parking brake, pull thelever up fully. To release it, pull upslightly, push the button, and lowerthe lever. The parking brake light onthe instrument panel should go outwhen the parking brake is fullyreleased (see page ).54

On Canadian model

Parking Brake

Mirrors, Parking Brake


NOTICE:

PARKING BRAKE LEVER

HEATED MIRROR BUTTON

Driving the vehicle with theparking brake applied can damage therear brakes and axles.

The ceiling light has a three-positionswitch; ON, Door Activated, andOFF.In the Door Activated (center)position, the light comes on whenyou:

Open any door.Remove the key from the ignition.If you do not open a door, the lightfades out in about 10 seconds.Unlock the doors with the key orremote transmitter.

Push on the spotlight lenses to turnthe light on and off.

The lights around the ignition switchcome on when you open any door.After you close the door, the ignitionswitch light stays on for severalseconds.

Ceiling Light Individual Interior Lights

Interior Lights


DOOR ACTIVATED

OFF

ON

FRONT

Interior Convenience Items


VANITY MIRROR

GLOVE BOX

COIN BOX CENTER POCKET

ACCESSORYPOWER SOCKET

COAT HOOK

BEVERAGE HOLDER

CONSOLE COMPARTMENT

Open the glove box by squeezing thehandle. Close it with a firm push.

Be careful when you are using thebeverage holders. A spilled liquidthat is very hot can scald you or yourpassengers. Spilled liquid can alsodamage the upholstery, carpeting,and electrical components in theinterior. Open the front beverageholder by pushing on the top.

Open the rear beverage holder bypushing on the back and pulling theholder all the way out.

This socket is intended to supplypower for 12 volt DC accessoriesthat are rated 120 watts or less (10amps).

To open the console compartment,pull the left lever and lift the lid.

To close, lower the lid and push itdown until it latches.

Beverage Holders Glove Box

Accessory Power Sockets

Console Compartment

Interior Convenience Items


LEVER

CONSOLE COMPARTMENT

An open glove box can causeserious injury to your passengerin a crash, even if thepassenger is wearing the seatbelt.

Always keep the glove boxclosed while driving.

The standard audio system hasmany features. This section de-scribes those features and how touse them. (If you selected anoptional audio system, refer to theoperating instructions that camewith it.)

The heating and air conditioningsystems in your Honda provide acomfortable driving environment inall weather conditions.

Your Honda has an anti-theft audiosystem that requires a code numberto enable it.

...............Vents, Heating, and A/C . 88............................Playing the Radio . 94..........................Radio Reception . 97

....................................Playing a CD . 99..............................CD Changer . 100

................Protecting Your CDs . 101.....CD Player Error Messages . 102

.CD Changer Error Messages . 103...............................Playing a Tape . 104

.................Radio Theft Protection . 107..........................Setting the Clock . 108

...............................Cruise Control . 109

Comfort and Convenience Features

Comfort and Convenience Features 87


Vents, Heating, and A/C

88

MODE CONTROL DIAL

TEMPERATURECONTROL DIAL

FAN CONTROL DIAL RECIRCULATION BUTTON

AIR CONDITIONING BUTTON

ECON BUTTON

CONTINUED

You can manually set the systemcontrols for ventilation, airconditioning, heating, air flowdirection, and fan speed in variouscombinations.

When the ECON button is on:The indicator comes on.The Auto Idle Stop is enabled.The system will not cool as quicklywhen the A/C is on.

If the outside temperature is belowfreezing, the Auto Idle Stop isdisabled, even if the ECON button ison. The heater will continue to warmthe interior with the vehicle stoppedand engine running.

When the ECON button is off:The Auto Idle Stop is disabled.The system turns off the ECONmode when you select or

.

If the fan control dial is off, theECON button will not turn on or off,and the Auto Idle Stop is enabled.


Manual Operation ECON Button


89

The outside air intakes for theheating and cooling system are atthe base of the windshield. Keep thisarea clear of leaves and other debris.

The system should be left in FreshAir mode under almost all conditions.Keeping the system in Recirculationmode, particularly with the A/C off,can cause the windows to fog up.

Switch to Recirculation mode whendriving through dusty or smokyconditions, then return to Fresh Airmode.

This button turns the rear windowdefogger off and on (see page ).

Use the mode control dial to selectthe vents the air flow from. Some airwill flow from the dashboard vents inall modes.

Air flows from the centerand corner vents in the dashboard.

Air flow is divided betweenthe vents in the dashboard and thefloor vents.

Air flows from the floorvents. When you select , thesystem automatically switches toFresh Air mode.

Air flow is divided betweenthe floor vents and the defrostervents at the base of the windshield.

Air flows from the defrostervents at the base of the windshield.

Turn this dial to control fan speedand the air flow.

When the dial is set to AUTO, thesystem controls the fan speedautomatically.

Turning this dial clockwise increasesthe temperature of the airflow.

This button turns the airconditioning on and off. The light inthe button is on when the A/C is on.

When the light in the button is on,air from the vehicle’s interior is sentthroughout the system again. Whenthe light is off, air is brought in fromthe outside of the vehicle (Fresh Airmode).

When you select or ,the system automatically switches toFresh Air mode and turns on theA/C and turns off the ECON mode.

68

Fan Control Dial

Rear Window Defogger Button

Mode Control Dial

Air Conditioning (A/C) Button

Temperature Control Dial

Recirculation Button



90

If the interior is very warm, you cancool it down more rapidly by partiallyopening the windows, turning on theA/C, and setting the fan tomaximum speed in Fresh Air mode.

In AUTO mode, the system controlsthe air flow direction automaticallybetween the dashboard vents andthe floor vents.

The flow-through ventilation systemdraws in outside air, circulates itthrough the interior, then exhausts itthrough vents near the rear sidepanels.

Turn the temperature control dialall the way to the left.Make sure the A/C is off.Select and Fresh Air mode.Set the fan to the desired speed.

The heater uses engine coolant towarm the air. If the engine is cold, itwill be several minutes before youfeel warm air coming through thesystem.

Turn on the A/C by pressing thebutton. The light in the buttoncomes on when a fan speed isselected.Make sure the temperaturecontrol dial is all the way to the left.Select .If the outside air is humid, selectRecirculation mode. If the outsideair is dry, select Fresh Air mode.Set the fan to the desired speed.

Air conditioning places an extra loadon the engine. Watch the enginecoolant temperature gauge (see page

). If it moves near the red zone,turn off the A/C until the gaugereads normally.

Select and Fresh Air mode.Set the fan to the desired speed.Adjust the warmth of the air withthe temperature control dial.

1.

2.3.4.

1.

2.

3.4.

5.

2.3.

1.

63

Ventilation

Using the Heater

Using the A/C



91

To use the heating and coolingsystem in automatic mode, set thesystem as follows.

Set the fan control dial to AUTO.

Set the mode control dial to AUTO.

Set the desired temperature byturning the temperature controldial. Turning this dial clockwiseincreases the temperature of theair flow.

Select Fresh Air mode. Theindicator in the button should beoff.

Turn on the A/C by pressing thebutton for cooling and dehumidi-fying. The indicator in the buttonlights.

To heat or cool the interior faster,select Recirculation mode and setthe temperature control dial to theupper or lower limit.

When you set the temperature to itslower or its upper limit, the systemruns at full cooling or heating only. Itdoes not regulate the interiortemperature.

Turning the fan control dial to OFF.However, a lack of air flow can causethe windows to fog up. It isrecommended that you keep the fanon at all times so stale air andmoisture do not build up in theinterior and cause fogging.

1.

2.

3.

4.

5.


Automatic Operation

To Turn Everything Off


92

Air conditioning, as it cools, removesmoisture from the air. When used incombination with the heater, itmakes the interior warm and dry.

Switch the fan on.Turn on the air conditioning.Select and Fresh Air mode.Adjust the temperature controldial to your preference.

This setting is suitable for all drivingconditions whenever the outsidetemperature is above 32°F (0°C).

To remove fog from the inside of thewindows:

When you switch to another modefrom , the A/C stays on.Press the A/C button to turn it off.

To clear the windows faster, you canclose the dashboard corner vents byrotating the wheel below it. This willsend more warm air to thewindshield defroster vents. Once thewindshield is clear, select the FreshAir mode to avoid fogging thewindows.

For your safety, make sure you havea clear view through all the windowsbefore driving.

Set the fan to the desired speed.Select , the systemautomatically switches to FreshAir mode, turns on the A/C andturns off the ECON mode. (TheA/C indicator will not come on.)Adjust the temperature controldial so the airflow feels warm.Select to help clear therear window (see page ).

Select . The systemautomatically switches to FreshAir mode, turns on the A/C andturns off the ECON mode. (TheA/C indicator will not come on.)Select .Set the fan and temperaturecontrols to maximum level.

1.2.3.4.

1.

2.3.

1.2.

3.

4.68

Dehumidify the Interior To Defog and Defrost To Remove Exterior Frost or IceFrom the Windows



Playing the Radio

Comfort and Convenience Features94

SEEK BAR

SCAN INDICATOR

TUNE KNOB

A.SELBUTTON

SCANBUTTON

AM/FM BUTTON A.SEL INDICATOR

ST INDICATOR

PWR/VOL KNOB PRESET BUTTONS

－

－

－

－The ignition switch must be in theACCESSORY (I) or ON (II) position.Turn the system on by pushing thePWR/VOL knob or the AM/FMbutton. Adjust the volume by turningthe same knob.

The band and frequency that theradio was last tuned to is displayed.To change bands, press the AM/FMbutton. On the FM band, ST will bedisplayed if the station is broadcast-ing in stereo. Stereo reproduction onAM is not available.

You can use any of five methods tofind radio stations on the selectedband: thepreset buttons, and .

Use the TUNE knob totune the radio to a desired frequency.Turn the knob right to tune to ahigher frequency, or left to tune to a

lower frequency.

The SEEK functionsearches up and down from thecurrent frequency to find a stationwith a strong signal. To activate it,press the or side of thebar, then release it.

The SCAN functionsamples all stations with strongsignals on the selected band. Toactivate it, press the SCAN button,then release it. You will see SCAN inthe display. The system will scan fora station with a strong signal. Whenit finds one, it will stop and play thatstation for about five seconds.

If you do nothing, the system willthen scan for the next strong stationand play it for five seconds. When itplays a station you want to listen to,press the SCAN button again.

Each preset button canstore one frequency on AM, and twofrequencies on FM.

Select the desired band, AM orFM. FM1 and FM2 let you storetwo frequencies with each presetbutton.Use the TUNE, SEEK, or SCANfunction to tune the radio to adesired station.Pick a preset button, and hold ituntil you hear a beep.Repeat steps 1 to 3 to store a totalof six stations on AM and twelvestations on FM.

The preset frequencies will be lost ifyour vehicle’s battery goes dead, isdisconnected, or the radio fuse isremoved.

1.

2.

3.

4.

CONTINUED

To Play the Radio

To Select a Station

TUNE, SEEK, SCAN,AUTO SELECT

TUNE

SEEK

SCAN

Preset

Playing the Radio


－

－

－If you aretraveling far from home and can nolonger receive your preset stations,you can use the Auto Select featureto find stations in the local area.

Press the A. SEL Button. ‘‘A.SEL’’flashes in the display, and the systemgoes into scan mode for severalseconds. It stores the frequencies ofsix AM, and twelve FM stations inthe preset buttons.

You will see a ‘‘0’’ displayed afterpressing a preset button if AutoSelect cannot find a strong stationfor every preset button.

If you do not like the stations AutoSelect has stored, you can storeother frequencies on the presetbuttons. Use the TUNE, SEEK, orSCAN functions to find stations, thenstore them in the preset buttons asdescribed.

press theA. SEL button. This restores thepresets you originally set.

You can use the instrument panelbrightness control knob to adjust theillumination of the audio system (seepage ). The audio systemilluminates when the parking lightsare on, even if the radio is off.

Use the TRE/BASmodes to adjust the tone to yourliking.

Each mode is shown in the display asit changes. Turn the SOUND(TUNE) knob to adjust the setting toyour liking. When the level reachesthe center, you will see ‘‘C’’ in thedisplay. The system willautomatically return the display tothe selected audio mode about fiveseconds after you stop adjusting amode.

These twomodes adjust the strength of thesound coming from each speaker.BAL adjusts the side-to-side strength,while FAD adjusts the front-to-backstrength.Press the SOUND (TUNE) knob

repeatedly to display the Bass (BAS),Treble (TRE), Fader (FAD), andBalance (BAL) setting.

67

To turn off Auto Select,AUTO SELECT

Adjusting the Sound

Audio System Lighting

Treble/Bass

Balance/Fader

Playing the Radio


Your Honda’s radio can receive thecomplete AM and FM bands.Those bands cover these frequen-cies:

AM band:530 to 1,710 kilohertzFM band:87.7 to 107.9 megahertz

Radio stations on the AM band areassigned frequencies at least tenkilohertz apart (530, 540, 550).Stations on the FM band areassigned frequencies at least 0.2megahertz apart (87.9, 88.1, 88.3).

Stations must use these exactfrequencies. It is fairly common forstations to round-off the frequency intheir advertising, so your radio coulddisplay a frequency of 100.9 eventhough the announcer may identifythe station as ‘‘FM101.’’

How well your Honda’s radioreceives stations is dependent onmany factors, such as the distancefrom the station’s transmitter,nearby large objects, and atmos-pheric conditions.

A radio station’s signal gets weakeras you get farther away from itstransmitter. If you are listening to anAM station, you will notice the soundvolume becoming weaker, and thestation drifting in and out. If you arelistening to an FM station, you willsee the stereo indicator flickering offand on as the signal weakens.Eventually, the stereo indicator willgo off and the sound will fadecompletely as you get out of range ofthe station’s signal.

Driving very near the transmitter ofa station that is broadcasting on afrequency close to the frequency ofthe station you are listening to canalso affect your radio’s reception.You may temporarily hear bothstations, or hear only the station youare close to.

CONTINUED

Radio Frequencies Radio Reception

Radio Reception


Radio signals, especially on the FMband, are deflected by large objectssuch as buildings and hills. Yourradio then receives both the directsignal from the station’s transmitter,and the deflected signal. This causesthe sound to distort or flutter. This isa main cause of poor radio receptionin city driving.

Radio reception can be affected byatmospheric conditions such asthunderstorms, high humidity, andeven sunspots. You may be able toreceive a distant radio station oneday and not receive it the next daybecause of a change in conditions.

Electrical interference from passingvehicles and stationary sources cancause temporary reception problems.

As required by the FCC:Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

Radio Reception


Playing a CD


EJECT BUTTONCD SLOT

SEEK/SKIP BAR RPT BUTTON

CD BUTTON RDM BUTTONRPT INDICATOR

RDM INDICATORPWR/VOL KNOB

－＋

－

－

With the ignition in theACCESSORY (I) or ON (II) position,insert a CD into the CD slot. Thedrive will pull the CD in the rest ofthe way and begin to play it.You operate the CD player with thesame controls used for the radio.The number of the track playing isshown in the display. The system willcontinuously play a CD until youchange modes.

To select the CD changer, press theCD button. The CD and tracknumbers will be displayed. To selecta different CD, use the preset 5(DISC ) or preset 6 (DISC )button. If you select an empty slot inthe magazine, the changer will, afterfinding that slot empty, try to loadthe CD in the next slot.

Load the desired CDs in themagazine, and load the magazine inthe changer according to theinstructions that came with the unit.

A CD changer is available for yourvehicle. It holds up to six CDs. Youoperate the CD changer with thesame controls used for the in-dashCD player.

If you turn the system off while a CDis playing, either with the PWR/VOLknob or by turning off the ignition,

the CD will stay in the drive. Whenyou turn the system back on, the CDwill begin playing where it left off.

Press the AM/FM button to switchto the radio while a CD is playing.Press the CD button to play the CD.

Press the eject button ( ) toremove the CD. If you eject the CD,but do not remove it from the slot,the system will automatically reloadthe CD after 15 seconds and put it inpause mode. To begin playing, pressthe CD button.

This feature plays thetracks in random order. To activateRandom Play, press and release theRDM button. You will see RDM inthe display. This continues until youpress the RDM button again.

To continuously replaya track, press and release the RPT

button. You will see RPT in thedisplay. Press the RPT button againto turn it off.

Each time you press and release, the player skips forward to

the beginning of the next track.Press and release to skipbackward to the beginning of theprevious track.To move rapidly within a track, pressand hold the or . You willsee CUE or REW in the display.

To Play a CD

Operating the Optional CDChanger

To Stop Playing a CD

RANDOM

REPEAT

To Change Tracks (SKIP)

Playing a CD, CD Changer


When using CD-R discs, use onlyhigh quality CDs labeled for audiouse.

When recording a CD-R, therecording must be closed for it tobe used by the CD players.

CD-RW discs will not work in thisunit.

Play only standard round CDs.Odd-shaped CDs may jam in thedrive or cause other problems.

When a CD is not being played, storeit in its case to protect it from dustand other contamination. To preventwarpage, keep CDs out of directsunlight and extreme heat.

To clean a CD, use a clean soft cloth.Wipe across the CD from the centerto the outside edge.

A new CD may be rough on theinner and outer edges. The smallplastic pieces causing this roughnesscan flake off and fall on the re-cording surface of the CD, causingskipping or other problems. Removethese pieces by rubbing the innerand outer edges with the side of apencil or pen.

Never try to insert foreign objects inthe CD player or the magazine.

Handle a CD by its edges; nevertouch either surface. Do not placestabilizer rings or labels on the CD.These, along with contaminationfrom fingerprints, liquids, and felt-tippens, can cause the CD to not playproperly, or possibly jam in the drive.

Handle your CDs properly toprevent damage and skipping.

General Information Protecting CDs

Protecting Your CDs


Cause SolutionIf you see an error message in thedisplay while playing a CD, find thecause in the chart to the right. If youcannot clear the error message, takeyour vehicle to a Honda dealer.

ErrorMessage

FOCUS Error

Mechanical Error

High temperature

Press the EJECT button and pull out the CD.Check if it is inserted correctly in the CD player.Make sure the CD is not scratched or damaged.Press the EJECT button and pull out the CD.Check the CD for damage or deformation.If the CD cannot be pulled out, or the errormessage does not disappear after the CD isejected, see a Honda dealer.Will disappear when the temperature returns tonormal.

CD Player Error Messages


CauseIf you see an error message in thedisplay while playing a CD, find thecause in the chart to the right. If youcannot clear the error message, takeyour vehicle to a Honda dealer.

ErrorMessage

Solution

FOCUS Error

No CD in the CDmagazine

Mechanical Error

High temperature

No CD magazine in theCD changer

Press the magazine eject button and pull it out,check for an error message, and insert themagazine again. If the message does notdisappear or the magazine cannot be pulled out,see a Honda dealer.Insert CD.

Press the magazine eject button and pull it out.Check for an error message, and insert themagazine again. If the message does notdisappear or the magazine cannot be pulled out,see a Honda dealer.Will disappear when the temperature returns tonormal.Insert CD magazine.


CD Changer Error Messages

103

Playing a Tape


REW BUTTON

PWR/VOL KNOB PLAY/PROG BUTTON

SKIP BAR

FF BUTTON

DOLBY INDICATOR

RPT BUTTON

NR BUTTON

RPT INDICATORTAPE BUTTON

▲

－

－

＊

＊

The tape direction indicator willcome on to show you which side ofthe tape is playing. The indicatesthe side you inserted upward in nowplaying. If you want to play the otherside, press the PLAY/PROG button.When the player reaches the end ofthe tape, it will automatically reversedirection and play the other side.

Dolby noise reduction turns onwhen you insert a tape. The

indicator will light in thedisplay. If the tape was not recordedin Dolby, turn it off by pressing theNR button. Dolby remains off untilyou press the NR button again.

To remove the tape, press theEJECT button. If you want to turnthe player off, press the PWR/VOLknob or turn off the ignition. Thetape will remain in the drive. Whenyou turn the system back on, thetape will begin playing where it leftoff.

To switch to the radio or CD playerwhile a tape is playing, press theAM/FM or CD/TAPE button. Tochange back to the tape player, pressthe CD/TAPE button.

To rewind the tape,push the REW button. You will seeREW in the display. To fast forwardthe tape, push the FF button. Youwill see FF displayed. Press the FF,REW, or PLAY/PROG button totake the system out of rewind or fastforward.

Press button to findthe beginning of the current song orpassage. Press button to findthe beginning of the next song orpassage. When the system reachesthe beginning of a song or passage, itbegins to play it.

The ignition switch must be in theACCESSORY (I) or ON (II) position.Make sure the open side of the tapeis facing right, then insert the tapemost of the way into the slot. Thesystem will pull the tape in the restof the way, and begin to play it. Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing Corpo-ration. ‘‘DOLBY’’ and the double-D symbol

are trademarks of Dolby LaboratoriesLicensing Corporation.

CONTINUED

OptionalTo Play a Tape

To Stop Playing a Tape

Tape Search FunctionsFF/REW

SKIP

Playing a Tape


－ Press the RPT buttonto continuously play a song orpassage. You will see RPT displayed.The track will repeat until you pressthe RPT button again.

The SKIP and REPEATfunctions use silent periods on thetape to find the end of a song orpassage. These features may notwork if there is almost no gapbetween selections, a high noiselevel, or a silent period in the middleof a selection.

The tape player picks up dirt andoxides from the tape. Thiscontamination builds up over timeand cause the sound quality todegrade. To prevent this, you shouldclean the player after every 30 hoursof use.

If the tape is loose, tighten it byturning the hub with a pencil or yourfinger. If the label is peeling off,remove it or it could cause thecassette to jam in the player. Nevertry to insert a warped or damaged

cassette in the player.

Use 100-minute or shorter tapes.Tapes longer than that may break orjam the drive.

If you do not clean the tape playerregularly, it may eventually becomeimpossible to remove thecontamination with a normalcleaning kit. Your Honda dealer hasa cleaning kit available.

Store tapes in their cases to protectthem from dust and moisture. Neverplace tapes where they will beexposed to direct sunlight, high heat,or high humidity. If a tape is exposedto extreme heat or cold, let it reach amoderate temperature beforeinserting it into the player.

Never insert foreign objects into thecassette player.

REPEAT Caring for the Tape and Player


Playing a Tape

106

NOTE:

You will have to store your favoritestations in the Preset buttons afterthe system begins working. Youroriginal settings were lost when thepower was disconnected.

If the code card is lost, a Hondadealer can access your code withyour radio’s serial number. Toaccess the serial number, turn theradio on. It must display ‘‘COdE’’,then turn the radio off. Push thepreset 1, preset 6, and power buttonsat the same time, then quicklyrelease.

Your vehicle’s audio system willdisable itself if it is disconnectedfrom electrical power for any reason.To make it work again, you mustenter a specific five-digit code in thepreset buttons. Because there arehundreds of number combinationspossible from five-digits, making thesystem work without knowing theexact code is nearly impossible.

You should have received a card thatlists your audio system code numberand serial number. It is best to storethis card in a safe place at home. Inaddition, you should write the audiosystem’s serial number in thisOwner’s Manual.

If you should happen to lose the card,you must obtain the code numberfrom a Honda dealer. To do this, youwill need the system’s serial number.

If you make a mistake entering thecode, do not start over; complete thefive-digit sequence, then enter thecorrect code. You have ten tries toenter the correct code. If you areunsuccessful in ten attempts, youmust then leave the system on for 1hour before trying again.

If your vehicle’s battery is discon-nected or goes dead, the audiosystem will disable itself. If thishappens, you will see ‘‘COdE’’ in thefrequency display the next time youturn on the system. Use the Presetbuttons to enter the five-digit code.The code is located on the radio codecard included in your Owner’sManual kit. When it is enteredcorrectly, the radio will start playing.

Radio Theft Protection


If your vehicle’s battery isdisconnected or goes dead, you willneed to set the clock.

For example: 1:06 will reset to 1:001:52 will reset to 2:00

Press and hold the CLOCK buttonuntil you hear a beep. Change thehours by pressing the H (Preset 4)button until the numbers advance tothe desired time. Change theminutes by pressing the M (Preset5) button until the numbers advanceto the desired time. When you arefinished, press the CLOCK buttonagain.

You can quickly set the time to thenearest hour. If the displayed time isbefore the half hour, press and holdthe CLOCK button until you hear abeep, then press the R (Preset 6)button to set the clock back to theprevious hour. If the displayed timeis after the half hour, the clock setsforward to the beginning of the nexthour.

Setting the Clock


M BUTTON

H BUTTON

R BUTTON

CLOCK (SCAN/RPT) BUTTON

Accelerate to the desired cruisingspeed above 25 mph (40 km/h).

Cruise control allows you to maintaina set speed above 25 mph (40 km/h)without keeping your foot on theaccelerator pedal. It should be usedfor cruising on straight, openhighways. It is not recommended forcity driving, winding roads, slipperyroads, heavy rain, or bad weather.

Push in the Cruise Control MasterSwitch. The indicator in the switchwill come on.

Press and release the SET/decelbutton on the steering wheel. TheCRUISE CONTROL indicator onthe instrument panel comes on toshow the system is now activated.

1.

2.

3.

CONTINUED

Using the Cruise Control

Cruise Control


SET/decelBUTTON

RESUME/accelBUTTON

CANCEL BUTTON

Improper use of the cruisecontrol can lead to a crash.

Use the cruise control onlywhen traveling on openhighways in good weather.

The cruise control may not hold theset speed when you are going up anddown hills. If your speed increasesgoing down a hill, use the brakes toslow down. This will cancel thecruise control. To resume the setspeed, press the RESUME/accelbutton. The CRUISE CONTROLlight on the instrument panel willcome back on.

You can increase the set cruisingspeed in any of these ways:

Press and hold the RESUME/accel button. When you reach thedesired cruising speed, release thebutton.

Push on the accelerator pedal.Accelerate to the desired cruisingspeed and press the SET/decelbutton.

You can decrease the set cruisingspeed in any of these ways:

Press and hold the SET/decelbutton. Release the button whenyou reach the desired speed.

To increase your speed in verysmall amounts, tap the RESUME/accel button. Each time you dothis, your vehicle will speed upabout 1 mph (1.6 km/h).

To slow down in very smallamounts, tap the SET/decelbutton. Each time you do this,your vehicle will slow down about1 mph (1.6 km/h).

Tap the brake or clutch pedallightly with your foot. TheCRUISE CONTROL light on theinstrument panel will go out.When the vehicle slows to thedesired speed, press the SET/decel button.

Changing the Set Speed

Cruise Control


Even with the cruise control turnedon, you can still use the acceleratorpedal to speed up for passing. Aftercompleting the pass, take your footoff the accelerator pedal. The vehiclewill return to the set cruising speed.

Resting your foot on the brake orclutch pedal will cause the cruisecontrol to cancel.

You can cancel the cruise control inany of these ways:

Tap the brake or clutch pedal.

Push the CANCEL button on thesteering wheel.

Press the Cruise Control MasterSwitch.

Pressing the Cruise Control MasterSwitch turns the system completelyoff and erases the previous cruisingspeed.

When you push the CANCEL button,or tap the brake or clutch pedal, thesystem remembers the previously-set cruising speed. To return to thatspeed, accelerate to above 25 mph(40 km/h) and then press andrelease the RESUME/accel button.The CRUISE CONTROL light comeson. The vehicle will accelerate to thesame cruising speed as before.

Cancelling the Cruise Control

Cruise Control


Before you begin driving your Honda,you should know what gasoline touse, and how to check the levels ofimportant fluids. You also need toknow how to properly store luggageor packages. The information in thissection will help you. If you plan toadd any accessories to your vehicle,please read the information in thissection first.

.............................Break-in Period . 114...............................Gasoline Type . 114

.........Service Station Procedures . 115...............................Fuel Economy . 119

...Accessories and Modifications . 121.............................Carrying Cargo . 123

Before Driving

Before Driving 113

Help assure your vehicle’s futurereliability and performance by payingextra attention to how you driveduring the first 600 miles (1,000 km).During this period:

Avoid full-throttle starts and rapidacceleration.

Avoid hard braking for the first200 miles (300 km).

Do not change the oil until thescheduled maintenance time.

You should also follow these re-commendations with an overhauledor exchanged engine, or when thebrakes are replaced.

We recommend using gasolinecontaining detergent additives thathelp prevent fuel system and enginedeposits.

Use of gasoline with these additivesmay adversely affect performance,and cause the Malfunction IndicatorLamp on your instrument panel tocome on. If this happens, contactyour authorized Honda dealer forservice.

Your Honda is designed to operateon unleaded gasoline with a pumpoctane number of 86 or higher. Useof a lower octane gasoline can causeoccasional metallic knoking noises inthe engine and will result indecreased engine performance.

Using gasoline containing lead willdamage your vehicle’s emissionscontrols. This contributes to airpollution.

In addition, in order to maintain goodperformance, fuel economy, andemissions control, we stronglyrecommend, in areas where it isavailable, the use of gasoline thatdoes NOT contain manganese-basedfuel additives such as MMT.

If you notice any undesirableoperating symptoms, try anotherservice station or switch to anotherbrand of gasoline.

Some gasoline today is blended withoxygenates such as ethanol orMTBE. Your vehicle is designed tooperate on oxygenated gasolinecontaining up to 10 percent ethanolby volume and up to 15 percentMTBE by volume. Do not usegasoline containing methanol.

For further important fuel-relatedinformation, please refer to yourQuick Start Guide.

Break-in Period, Gasoline Type

Before Driving

Break-in Period Gasoline Type

114

Park with the driver’s side closestto the gas pump.

Open the fuel fill door by pushingon the handle to the left of thedriver’s seat.

The fuel fill cap is attached to thefuel filler with a tether. Insert thetether end on the fuel fill cap intothe slot on the fuel fill door.

Remove the fuel fill cap slowly.You may hear a hissing sound aspressure inside the tank escapes.

1.

2.

3.

CONTINUED

AT-PZEV

Before Driving

Fueling

Service Station Procedures

115

Push

FUEL FILL CAP

TETHER END

TETHER

Gasoline is highly flammableand explosive. You can beburned or seriously injuredwhen handling fuel.

Stop the engine and keepheat, sparks, and flamesaway.Handle fuel only outdoors.Wipe up spills immediately.

Place the cap in the holder on thefuel fill door.

Stop filling the tank after the fuelnozzle automatically clicks off. Donot try to ‘‘top off’’ the tank. Leavesome room for the fuel to expandwith temperature changes.

even though the tank is not full,there may be a problem with yourvehicle’s fuel vapor recoverysystem. The system helps keepfuel vapors from going into theatmosphere. Consult your dealer.

Screw the fuel fill cap back onuntil it clicks at least three times.If you do not properly tighten thecap, the Malfunction IndicatorLamp may come on (see page

).

Push the fuel fill door closed untilit latches.

4.

5.

6.

191

If the fuel nozzle keeps clicking off

ULEV


Before Driving116

HOLDER

FUEL FILL CAP

Park the vehicle, and set theparking brake. Pull the hoodrelease handle located under thelower left corner of the dashboard.The hood will pop up slightly.

Put your fingers between the frontedge of the hood and the frontgrille. The hood latch handle isabove the ‘‘H’’ logo. Push thishandle up until it releases thehood. Lift the hood.

If the hood latch handle movesstiffly, or if you can open the hoodwithout lifting the handle, themechanism should be cleaned andlubricated.

Lift it up slightly to remove thesupport rod from the hole. Put thesupport rod back into its holding clip.Lower the hood to about a foot (30cm) above the fender, then let itdrop. Make sure it is securelylatched.Pull the support rod out of its clip,

and insert the end into the hole onthe front left side of the hood.

2.

1.

3.

Opening the Hood To Close the Hood


Before Driving 117

HOODRELEASEHANDLE

LATCH GRIP

SUPPORT ROD CLIP

Wait a few minutes after turning theengine off before you check the oil.

Remove the dipstick (orange loop).

Wipe the dipstick with a cleancloth or paper towel.

Insert it all the way back in its tube.

Remove the dipstick again andcheck the level. It should bebetween the upper and lowermarks.

If it is near or below the lower mark,see on page .

Look at the coolant level in theradiator reserve tank. Make sure it isbetween the MAX and MIN lines. Ifit is below the MIN line, see

on page forinformation on adding the propercoolant.

Refer toon page for information

on checking other items in yourHonda.

2.

3.

1.

4.

152

155

146

Oil Check

Adding Oil

AddingEngine Coolant

Engine Coolant Check

Owner’s MaintenanceChecks


Before Driving118

DIPSTICK

UPPER MARK

LOWER MARK

RESERVE TANK

MIN

MAX

Always maintain your vehicleaccording to the maintenanceschedule. See

(see page).

an underinflated tirecauses more ‘‘rolling resistance,’’which uses fuel.

Try to maintain a constant speed.Every time you slow down andspeed up, your vehicle uses extrafuel. Use the cruise control whenappropriate.

Combine several short trips intoone.

The air conditioning puts an extraload on the engine which makes ituse more fuel. Use the fresh-airventilation when possible.

Drive moderately. Rapidacceleration, abrupt cornering andhard braking use more fuel.

Always drive in the highest gearpossible.

You may find that your Civic Hybrid’sunique combination of an engine andan electric motor has drivingcharacteristics that are somewhatdifferent from what you are used to.Shift Up and Shift Down indicators(5-speed manual transmission only)on the instrument panel show whento shift to a higher or lower gear. Byshifting as soon as the indicatorcomes on, you will keep the engineoperating in its most economicalrange.

Engine oil also affects fueleconomy. The fuel efficient, low-viscosity 0W-20 oil recommendedfor your Civic Hybrid isformulated to help the engine useless fuel. This oil is available atyour Honda dealer.

The build-up of snow or mud onyour vehicle’s underside addsweight and rolling resistance.Frequent cleaning helps your fuelmileage and reduces the chance ofcorrosion.

146

For example,

CONTINUED

Improving Fuel Economy

Owner’sMaintenance Checks

Fuel Economy

Before Driving 119

If air conditioning is needed, you cansave some fuel by using the A/C in‘‘ECON’’ mode. When the outsidetemperature is above freezing, thismode allows the Auto Idle Stopfunction to shut off the engine whenthe vehicle is stopped, resulting infuel savings.

You may notice that using the A/Ccauses a greater drop in fueleconomy than you are used to inother vehicles. Although the amountof extra fuel used by the A/C load onthe engine is no greater than othervehicles, it is more noticeablebecause of your Civic Hybrid’sexcellent fuel mileage. Using theA/C in hot weather may result infuel economy that is lower thanexpected.

Fuel Economy

Before Driving120

Your dealer has Honda accessoriesthat allow you to personalize yourvehicle. These accessories havebeen designed and approved for yourvehicle, and are covered by warranty.

When properly installed, cellularphones, alarms, two-way radios, andlow-powered audio systems shouldnot interfere with your vehicle’scomputer controlled systems, suchas the SRS and anti-lock brakesystem.

Before installing any accessory:Make sure the accessory does notobscure any lights, or interferewith proper vehicle operation orperformance.

Be sure electronic accessories donot overload electrical circuits(see page ) or interfere withproper operation.

Have the installer contact yourHonda dealer for assistance beforeinstalling any electronic accessory.

Modifying your vehicle, or installingsome non-Honda accessories, canmake your vehicle unsafe. Beforeyou make any modifications or addany accessories, be sure to read thefollowing information.

Although aftermarket accessoriesmay fit on your vehicle, they may notmeet factory specifications, andcould adversely affect your vehicle’shandling and stability (see‘‘Modifications’’ on page foradditional information).

194

122

Accessories

Before Driving

Accessories and Modifications

121

Improper accessories ormodifications can affect yourvehicle’s handling, stability, andperformance, and cause acrash in which you can be hurtor killed.

Follow all instructions in thisowner’s manual regardingaccessories and modifications.

Some examples are:

Raising your vehicle with anaftermarket suspension kit canaffect the handling and stability.

Aftermarket wheels, because theyare a universal design, can causeexcessive stress on suspensioncomponents.

Larger or smaller wheels and tirescan interfere with the operation ofyour vehicle’s anti-lock brakes andother systems.

Do not modify your steering wheelor any other part of yourSupplemental Restraint System.Modifications could make thesystem ineffective. See the safetyprecautions on page .

Removing parts from your vehicle,or replacing components with non-Honda (aftermarket) componentscould seriously affect your vehicle’shandling, stability, and reliability.

Lowering your vehicle with anaftermarket suspension kit thatsignificantly reduces groundclearance can allow theundercarriage to hit speed bumpsor other raised objects, whichcould cause the airbags to deploy.

If you plan to modify your vehicle,consult your Honda dealer.

Improperlyreplacing or covering front seat-back covers can prevent your sideairbags from inflating during acollision.

28

Before Driving

Modifying Your Vehicle Additional Safety Precaution

Accessories and Modifications

Do not cover or replace front seat-back covers without consulting aHonda dealer.

122

Your vehicle has several convenientstorage areas:

Glove boxFront door and seat-back pocketsConsole compartmentTrunk

However, carrying too much cargo,or improperly storing it, can affectyour vehicle’s handling, stability,stopping distance, and tires, andmake it unsafe. Before carrying anytype of cargo, be sure to read thefollowing pages.

Center pocket

Carrying Cargo

Before Driving 123

FRONT DOOR POCKET

TRUNK

GLOVE BOX

CONSOLE COMPARTMENT

SEAT-BACK POCKET

CENTER POCKET

Overloading or improperloading can affect handling andstability and cause a crash inwhich you can be hurt or killed.

Follow all load limits and otherloading guidelines in thismanual.

×

－

To determine the correct cargo andluggage load limit:

Locate the statement, ‘‘thecombined weight of occupants andcargo should never exceed 850 lbs(395 kg)’’ on your vehicle’s placard(on the driver’s doorjamb).

Determine the combined weightof the driver and passengers thatwill be riding in the vehicle.(Five is seating capacity of yourvehicle.)

Subtract the combined weight ofthe driver and passengers from850 lbs (395 kg).

The resulting figure equals theavailable load capacity.

Store or secure all items that couldbe thrown around and hurtsomeone during a crash.

Be sure items placed on the floorbehind the front seats cannot rollunder the seats and interfere withthe pedals or seat operation.

Keep the glove box closed whiledriving. If it is open, a passengercould injure their knees during acrash or sudden stop.

For example, if there will be four 150lbs (70 kg) occupants in your vehicle,the amount of available cargo andluggage load capacity is 250 lbs (115kg).4 150 lbs (70 kg) = 600 lbs (280kg)850 lbs (395 kg) 600 lbs (280 kg) =250 lbs (115 kg)

The maximum load for your vehicleis 850 lbs (395 kg). This figureincludes total weight of all occupants,cargo, and accessories.

Do not put any items on top of thetrunk panel. They can block yourview and be thrown around thevehicle during a crash.

Determine the combined weightof accessories, luggage, and cargobeing loaded in the vehicle. Theweight may not safely exceed theavailable cargo and luggage loadcapacity calculated in step 4.

1.

2.

3.

4.

5.

Carrying Cargo

Before Driving

Carrying Items in the PassengerCompartment

124

Do not spill any liquids over the airintake and also do not put any smallforeign objects in it. This maydamage the IMA battery and thepower control unit.

The air intake for the IMA batteryand electronics are located on top ofthe trunk panel. Do not block this airintake, it may cause the IMA batteryand the power control unit tooverheat, causing the IMA system toshut down. It will start working againafter it cools.

Distribute cargo evenly on thefloor of the trunk, placing theheaviest items on the bottom andas far forward as possible.

If you carry large items thatprevent you from closing the trunklid, exhaust gas can enter thepassenger area. To avoid thepossibility of

, follow the instructionson page .46

Carrying Cargo

Before Driving

Air IntakeCarrying Cargo in the Trunk

carbon monoxidepoisoning

125

AIR INTAKE

This section gives you tips onstarting the engine under variousconditions, and how to operate the5-speed manual and automatictransmissions. It also includes impor-tant information on parking yourvehicle, and the braking system.

........................Preparing to Drive . 128.......................Starting the Engine . 129

....5-speed Manual Transmission . 130.Automatic Transmission (CVT) . 133

...........................................Parking . 139.............................Braking System . 140

...............Anti-lock Brakes (ABS) . 141...........................Towing a Trailer . 142

Driving

Driving 127

Make sure all windows, mirrors,and outside lights are clean andunobstructed. Remove frost, snow,or ice.

Check that the hood and trunk arefully closed.

Visually check the tires. If a tirelooks low, use a gauge to check itspressure.

Check that any items you may becarrying are stored properly orfastened down securely.

Check the seat adjustment (seepage ).

Check the adjustment of theinside and outside mirrors (seepage ).

Check the steering wheeladjustment (see page ).

Make sure the doors are securelyclosed and locked.

Fasten your seat belt. Check thatyour passengers have fastenedtheir seat belts (see page ).

When you start the engine, checkthe gauges and indicator lights inthe instrument panel (see page

).

You should do the following checksand adjustments every day beforeyou drive your vehicle.

1.

2.

3.

4. 9.

8.

7.

6.

5.

14

69

51

77

81

Preparing to Drive

Driving128

Apply the parking brake.

In cold weather, turn off allelectrical accessories to reducethe drain on the battery.

Push the clutch pedal down all theway.

Make sure the shift lever is inPark. Press on the brake pedal.

Without touching the acceleratorpedal, turn the ignition key to theSTART (III) position. Do not holdthe key in START for more than15 seconds at a time. If the enginedoes not start right away, pausefor at least 10 seconds beforetrying again.

If the engine does not start within15 seconds, or starts but stallsright away, repeat step 4 with theaccelerator pedal pressed halfwaydown. If the engine starts, releasepressure on the accelerator pedalso the engine does not race.

If the engine fails to start, pressthe accelerator pedal all the waydown and hold it there whilestarting to clear flooding. If theengine still does not start, returnto step 5.

In cold weather, conventional starteris used instead of the IMA systemstarter. This is normal. The engine isalso harder to start at altitudes above8,000 feet (2,400 meters) because ofthe thinner air.

1.

2.

3.

4.

5.

6.

Manual Transmission:


Starting the Engine

Driving

Starting in Cold Weather

129

The manual transmission is syn-chronized in all forward gears forsmooth operation. It has a lockout soyou cannot shift directly from Fifthto Reverse. When shifting up ordown, make sure you push the clutchpedal down all the way, shift to thenext gear, and let the pedal upgradually. When you are not shifting,do not rest your foot on the clutchpedal. This can cause your clutch towear out faster.

Come to a full stop before you shiftinto Reverse. You can damage thetransmission by trying to shift intoReverse with the vehicle moving.Push down the clutch pedal, andpause for a few seconds beforeshifting into Reverse, or shift intoone of the forward gears for amoment. This stops the gears sothey won’t ‘‘grind.’’

When slowing down, you can getextra braking from the engine byshifting to a lower gear. This extrabraking can help you maintain a safespeed and prevent your brakes fromoverheating while going down asteep hill. Before downshifting,make sure the vehicle speed is lowenough that you will not activate theengine speed limiter in the lowergear. Make sure the engine speedwill not go into the tachometer’s redzone in the lower gear beforedownshifting.

If you exceed the maximum speedfor the gear you are in, the enginespeed will enter into the tachometer’sred zone. If this occurs, you may feelthe engine cut in and out. This iscaused by a limiter in the engine’scomputer controls. The engine willrun normally when you reduce theRPM below the red zone.

Before downshifting, make sure theengine will not go into thetachometer’s red zone.

5-speed Manual Transmission

Driving

Engine Speed Limiter

130

Rapid slowing or speeding-upcan cause loss of control onslippery surfaces. If you crash,you can be injured.

Use extra care when driving onslippery surfaces.

To maximize fuel economy, yourCivic Hybrid has an Auto Idle Stopfunction. Under certain conditions,the engine will shut off when youcome to a stop. Those conditions are:

The engine coolant is nearly up tonormal operating temperature.

The vehicle’s speed is below 19mph (30 km/h) and you arepressing on the brake pedal tocome to a stop.

You depress the clutch pedal.

You are not pressing on theaccelerator pedal.

The IMA battery is chargedenough to operate the system.

The Auto Idle Stop function may notactivate if the IMA batterytemperature is too hot or too cold.

During Auto Idle Stop, the IMAcharge and power brake vacuumreserve is monitored by the system.If either drops below a desired level,and the shift lever is in Neutral, theengine will restart so it can rechargethe IMA battery or replenish thevacuum supply.

The ECON mode is selected, andthe outside temperature is abovefreezing, or the fan speed controldial is off (see page ).

There is adequate vacuum reservefor the power brakes.

When these conditions are met, theengine will shut off as you come to astop. It will start again automaticallywhen you depress the clutch pedalfully and move the shift lever to firstgear. There is no need to start theengine with the ignition switch.

It is recommended that you movethe shift lever to Neutral and removeyour foot from the clutch pedal whileyou are stopped. Sitting with theclutch pedal depressed and the shiftlever in gear will cause the engine tocontinue running, defeating the fueleconomy benefits of the Auto IdleStop function.

89


Auto Idle Stop

Driving 131

This indicator will blink, and you willhear a continuous beep, if you openthe door when Auto Stop is active.The beep will stop when you closethe door.

Always turn the ignition switch toLOCK (0) and remove the key if youare getting out of the vehicle.

This indicator comes on as areminder that the engine hasstopped because of the Auto IdleStop function. When the indicator isoff, it means that Auto Idle Stop isnot active. When the indicator is on,but the engine is not running, itmeans the clutch pedal is depressed,but the transmission is not in gear.When the indicator is blinking, itmeans the clutch pedal is notdepressed completely. You cannot

restart the engine with the ignitionswitch when this light is blinking.

Either the Shift Up or Shift Downindicator will light to show the besttime to shift to a higher or lowergear. You can achieve the best fueleconomy by accelerating anddecelerating slowly, and shiftingwhen prompted by the Shift Upindicator.

Road and traffic conditions mayrequire you to shift at times otherthan those indicated.


Auto Idle Stop Indicator Shift Up/Shift Down Indicators

Driving132

AUTO IDLE STOP INDICATOR SHIFT UP INDICATOR

SHIFT DOWN INDICATOR

Honda’s Continuously VariableTransmission’s unique designprovides a smooth, constant flow ofpower. It is electronically controlledfor more precise operation andbetter fuel economy.

These indicators on the instrumentpanel show which position the shiftlever is in.

The ‘‘D’’ indicator comes on for afew seconds when you turn theignition switch to ON (II). If itflashes while driving (in any shiftposition), it indicates a possibleproblem in the transmission. Avoidrapid acceleration and have the trans-mission checked by a Honda dealeras soon as possible.

Continuously VariableTransmission (CVT)

Shift Lever Position Indicators


Driving 133

－To shift from any position, pressfirmly on the brake pedal and pressthe release button on the front of theshift lever. You cannot shift out ofPark when the ignition switch is inLOCK (0) or ACCESSORY (I).

To avoid transmission damage, cometo a complete stop before shiftinginto Park. The shift lever must be inPark before you can remove the keyfrom the ignition switch.

This position mechani-cally locks the transmission. UsePark whenever you are turning off orstarting the engine. To shift out ofPark, you must press on the brakepedal and have your foot off theaccelerator pedal. Press the releasebutton on the front of the shift leverto move it.

If you have done all of the above andstill cannot move the lever out ofPark, see onpage .136

To shift from:P to R

R to PN to RS to LL to SS to DD to ND to SN to DR to N

Do this:Press the brake pedal andpress the release button.

Press the release button.

Move the lever.

Shift Lever Positions

Park (P)

Shift Lock Release


Driving134

SHIFT LEVER

RELEASE BUTTON

－

－

－

－

－

Press the brakepedal and press the release button tothe front of shift lever to shift fromPark to Reverse. To shift fromReverse to Neutral, come to acomplete stop and then shift.

Use Neutral if youneed to restart a stalled engine, or ifit is necessary to stop briefly withthe engine idling. Shift to the Parkposition if you need to leave yourvehicle for any reason. Press on thebrake pedal when you are movingthe shift lever from Neutral toanother gear.

Use this position foryour normal driving. The transmis-sion automatically selects a suitablegear for your speed and acceleration.You may notice the transmissionshifting up at higher speeds whenthe engine is cold. This helps theengine warm up faster.

Selecting Secondshifts the transmission into a lowerrange of ratios for betteracceleration and increased enginebraking. Use Second when you aregoing down a steep hill, or in stop-and-go driving.

To shift to Low, pressthe release button on the front of theshift lever. Use Low to get morepower when climbing, and formaximum engine braking whengoing down steep hills.

For faster acceleration when in D, Sor L, the transmission willautomatically ‘‘kick down’’ to a lowerrange of ratios by pushing theaccelerator pedal to the floor.

When the vehicle reaches themaximum speed in any shift position,you may feel the engine cut in andout. This is caused by a limiter (112mph, 180 km/h) in the engine’scomputer controls. The engine willrun normally when you reduce thespeed to below the maximum.

Reverse (R)

Neutral (N)

Drive (D)

Second (S)

Low (L)

Engine Speed Limiter


Driving 135

Insert the key in the Shift LockRelease slot.

Remove the key from the ShiftLock Release slot, then reinstallthe cover. Make sure the notch onthe cover is on the left side.Return the key to the ignitionswitch, press the brake pedal, andrestart the engine.

If you need to use the Shift LockRelease, it means your vehicle isdeveloping a problem. Have itchecked by a Honda dealer.

Push down on the key while youpress the release button on theshift lever and move the shift leverout of Park to Neutral.

Do this if pushing on the brake pedaland pressing the release button donot shift the transmission out ofPark:

Put a cloth on the edge of the ShiftLock Release slot cover next tothe shift lever. Use a key toremove the cover. Carefully pry onthe edge of the cover.

Remove the key from the ignitionswitch.

Set the Parking brake.1.

2.

3.

4.

5.

6.

Shift Lock Release


Driving136

RELEASE BUTTON

SHIFT LOCKRELEASE SLOTCOVER

To maximize fuel economy, yourCivic Hybrid has an Auto Idle Stopfunction. Under certain conditions,the engine will shut off when youcome to a stop. Those conditions are:

The engine coolant is nearly up tonormal operating temperature.

The shift lever is in D or N.

You are not pressing on theaccelerator pedal.

The IMA battery is chargedenough to operate the system.

The ECON mode is selected, andthe outside temperature is abovefreezing, or the fan speed controldial is off (see page ).

There is adequate vacuum reservefor the power brakes.

When these conditions are met afterthe vehicle speed has exceeded 10mph (16 km/h), the engine will shutoff as you are braking to a stop andthe vehicle speed goes below 5 mph(8 km/h).

The engine will start again when yourelease the brake pedal. It will alsorestart, even if you are still pressingthe brake pedal, under theseconditions:

You move the shift lever from Dor N to R or L.

You are on an incline, and thevehicle begins rolling.

During Auto Idle Stop, the IMAcharge and power brake vacuumreserve is monitored by the system.If the vacuum reserve drops belowan optimal level, the engine willrestart to replenish the vacuumsupply. If the IMA charge dropsbelow an optimal level and the shiftlever is in Neutral or Park (P), theengine will restart to recharge theIMA battery.

The Auto Idle Stop function may notactivate if the IMA batterytemperature is too hot or too cold.

You press the accelerator pedal.

89

Auto Idle Stop


Driving 137

The indicator blinks as a reminderthat the engine has stopped becauseof the Auto Idle Stop function. Youcannot restart the engine with theignition switch when this light isblinking.

If you open the driver’s door whenAuto Stop is active, the indicator willblink and you will hear a continuousbeep. The beep will stop when youclose the door.

With the driver’s door open, you willhear a continuous beep even if theAuto Idle Stop function isdeactivated and the engine restarts.

Always turn the ignition switch toLOCK (0) and remove the key if youare getting out of the vehicle.

Auto Idle Stop Indicator


Driving138

AUTO IDLE STOP INDICATOR

Always use the parking brake whenyou park your vehicle. Make surethe parking brake is set firmly oryour vehicle may roll if it is parkedon an incline.

If your vehicle has an automatictransmission, set the parking brakebefore you put the transmission inPark. This keeps the vehicle frommoving and putting pressure on theparking mechanism in thetransmission.

Make sure the windows are closed.

Turn off the lights.

Place any packages, valuables, etc.in the trunk or take them with you.

Lock the doors.

Never park over dry leaves, tallgrass, or other flammablematerials. The hot three waycatalytic converter could causethese materials to catch on fire.

If the vehicle is facing uphill, turnthe front wheels away from thecurb. If you have a manualtransmission, put it in first gear.

If the vehicle is facing downhill,turn the front wheels toward thecurb. If you have a manualtransmission, put it in reverse gear.

Make sure the parking brake isfully released before driving away.Driving with the parking brakepartially set can overheat ordamage the rear brakes.

Parking Tips

Parking

Driving 139

Check the brakes after drivingthrough deep water. Apply thebrakes moderately to see if they feelnormal. If not, apply them gently andfrequently until they do. Be extracautious in your driving.

The hydraulic system that operatesthe brakes has two separate circuits.Each circuit works diagonally acrossthe vehicle (the left-front brake isconnected with the right-rear brake,

etc.). If one circuit should develop aproblem, you will still have brakingat two wheels.

If the brake pads need replacing, youwill hear a distinctive, metallicscreeching sound when you applythe brake pedal. If you do not havethe brake pads replaced, they willscreech all the time. It is normal forthe brakes to occasionally squeal orsqueak when you apply them.

Your Honda is equipped with frontdisc brakes. The brakes on the rearwheels are drum. A power assisthelps reduce the effort needed onthe brake pedal. The ABS (on somemodels) helps you retain steeringcontrol when braking very hard.

Resting your foot on the pedal keepsthe brakes applied lightly, builds upheat, and reduces their effectiveness.It also keeps your brake lights on allthe time, confusing drivers behindyou.

Constant application of the brakeswhen going down a long hill buildsup heat and reduces their effective-ness. Use the engine to assist thebrakes by taking your foot off theaccelerator and downshifting to alower gear.

Braking System Design

Brake Wear Indicators

Driving

Braking System

140

Front

such as trying to take acorner too fast or making a suddenlane change.

Always steer moderatelywhen you are braking hard. Severeor sharp steering wheel movementcan still cause your vehicle to veerinto oncoming traffic or off the road.

It only helps with steeringcontrol during braking.

on loose oruneven surfaces, such as gravel orsnow, than a vehicle without anti-lock.

The Anti-lock Brake System (ABS)helps prevent the brakes fromlocking up and helps you retainsteering control by pumping thebrakes rapidly; much faster than aperson.

Let the ABS work for you by alwayskeeping firm, steady pressure on thebrake pedal. This is sometimesreferred to as ‘‘stomp and steer.’’

You will feel a pulsation in the brakepedal when the ABS activates, andyou may hear some noise. This isnormal: it is the ABS rapidlypumping the brakes. On drypavement, you will need to press onthe brake pedal very hard before theABS activates. However, you mayfeel the ABS activate immediately ifyou are trying to stop on snow or ice.

If the ABS indicator comes on, theanti-lock function of the brakingsystem has shut down. The brakesstill work like a conventional system,but without anti-lock. You shouldhave the dealer inspect your vehicleas soon as possible.

On models equipped

You should never pump the brake pedal.

Important Safety Reminders

ABS will not prevent a skid thatresults from changing directionabruptly,

ABS cannot prevent a loss ofstability.

ABS does not reduce the time ordistance it takes to stop thevehicle;

A vehicle with ABS may require alonger distance to stop

ABS Indicator

Anti-lock Brakes (ABS)

Driving 141

Your vehicle is not designed to tow atrailer. Attempting to do so can voidyour warranties.

Towing a Trailer

Driving142

This section also includesMaintenance Schedules for normaldriving and severe driving conditions,a Maintenance Record, and instruc-tions for simple maintenance tasksyou may want to take care ofyourself.

If you have the skills and tools to per-form more complex maintenancetasks on your Honda, you may wantto purchase the Service Manual. Seepage for information on how toobtain a copy, or see your Hondadealer.

This section explains why it isimportant to keep your vehicle wellmaintained and how to follow basicmaintenance safety precautions.

......................Maintenance Safety . 144.................Maintenance Schedule . 145

....................Maintenance Record . 149..............................Fluid Locations . 151

........................Adding Engine Oil . 152.........Changing the Oil and Filter . 153

..............................Engine Coolant . 155....................Windshield Washers . 157

.....Automatic Transmission Fluid .158........Manual Transmission Fluid . 159

................Brake and Clutch Fluid . 160....................................Hood Latch . 161

.............................................Lights . 161.......................................Seat Belts . 166.....................................Floor Mats . 166

..................Dust and Pollen Filter . 167.................................Wiper Blades . 168

...............................................Tires . 169...................Checking the Battery . 175

.............................Vehicle Storage . 176

217

Maintenance

Maintenance 143

All service items not detailed in thissection should be performed by aHonda technician or qualifiedmechanic.

To eliminate potential hazards, readthe instructions before you begin,and make sure you have the toolsand skills required.

To clean parts, use a commerciallyavailable degreaser or partscleaner, not gasoline.

To reduce the possibility of fire orexplosion, keep cigarettes, sparks,and flames away from the batteryand all fuel-related parts.

Wear eye protection andprotective clothing when working

with the battery or compressed air.

Be sure there isadequate ventilation whenever youoperate the engine.

Let theengine and exhaust system coolbefore touching any parts.

Donot run the engine unlessinstructed to do so.

Some of the most important safetyprecautions are given here. However,we cannot warn you of everyconceivable hazard that can arise inperforming maintenance. Only youcan decide whether or not youshould perform a given task.

Make sure your vehicle is parkedon level ground, the parking brakeis set, and the engine is off.

Maintenance Safety

Maintenance

Important Safety Precautions

Potential Vehicle HazardsCarbon Monoxide poison fromengine exhaust.

Burns from hot parts.

Injury from moving parts.

144

Failure to properly followmaintenance instructions andprecautions can cause you tobe seriously hurt or killed.

Always follow the proceduresand precautions in this owner’smanual.

Improperly maintaining thisvehicle or failing to correct aproblem before driving cancause a crash in which you canbe seriously hurt or killed.

Always follow the inspectionand maintenancerecommendations, andschedules in this owner’smanual.

－

－

Avoid exceeding your vehicle’sload limit. This puts excess stresson the engine, brakes, and manyother vehicle parts. The load limitis shown on the tire informationlabel on the driver’s doorjamb.

Follow theMaintenance Schedule for SevereConditions if you drive your vehicleMAINLY under one or more of thefollowing conditions.

Driving less than 5 miles (8 km)per trip or, in freezingtemperatures, driving less than 10miles (16 km) per trip.

Driving in extremely hot [over90°F (32°C)] conditions.

Used primarily as a deliveryvehicle or taxi that is drivenmostly in stop-and-go traffic and/or parked with the engine idling.

Driving on muddy, dusty, or de-iced roads.

NOTE: If you onlydrive under a ‘‘severe’’ condition, youshould follow the Normal ConditionsMaintenance Schedule.

The maintenance schedule assumesyou will use your vehicle as normaltransportation for passengers andtheir possessions. You should alsofollow these recommendation:

Operate your vehicle onreasonable roads within the legalspeed limit.

Always use unleaded gasoline withthe proper octane rating (see page

).

Drive your vehicle regularly over adistance of several miles(kilometers).

Service your vehicle according to thetime and mileage periods on one ofthe Maintenance Schedules on thefollowing pages.

Follow theMaintenance Schedule for SevereConditions.

Driving with a roof rack, or drivingin mountainous conditions.

114

OCCASIONALLY

Maintenance Schedule

Maintenance

Which Schedule to Follow

U.S. Owners

Canadian Owners

145

＃

－

－

－

－

－

－

Your authorized Honda dealerknows your vehicle best and canprovide competent, efficient service.However, service at a dealer is notmandatory to keep your warrantiesin effect. Maintenance may be doneby any qualified service facility orskilled person to keep yourwarranties in effect. Keep all thereceipts as proof of completion, andhave the person who does the workfill out the Maintenance Record.Check your warranty booklet formore information.

We recommend the use of Hondaparts and fluids whenever you havemaintenance done.

U.S. Vehicles:

According to state and federalregulations, failure to performmaintenance on the items markedwith will not void your emissionswarranties. However, Hondarecommends that all maintenanceservices be performed at therecommended time or mileageperiod to ensure long-term reliability.

You should check the followingitems at the specified intervals. Ifyou are unsure of how to performany check, turn to the appropriatepage listed.

Engine oil level Check everytime you fill the fuel tank. Seepage .Engine coolant level Check theradiator reserve tank every timeyou fill the fuel tank. See page .

Brakes Check the fluid levelmonthly. See page .Tires Check the tire pressuremonthly. Examine the tread forwear and foreign objects. See page

.Lights Check the operation ofthe headlights, parking lights,taillights, high-mount brake light,and license plate lights monthly.See page .

Automatic transmission (CVT)Check the fluid level monthly. Seepage .

118

118

158

160

169

161

Maintenance Schedule

Maintenance

Servicing Your VehicleMaintenance, replacement, orrepair of emissions controldevices and systems may be doneby any automotive repairestablishment or individual usingparts that are ‘‘certif ied’’ to EPAstandards.

Owner’s Maintenance Checks

146

＃

＊

＊

＃

＃

＊

＊

－

Follow the Normal MaintenanceSchedule if the severe drivingconditions specified in the SevereConditions Maintenance Schedule onthe next page do not apply.

NOTE: If you only OCCASIONALLYdrive under a ‘‘severe’’ condition, youshould follow the Normal ConditionsMaintenance Schedule.


Maintenance

Canadian Owners

147

miles x 1,000km x 1,000

Service the items listed at the indicated distance (or time, if given).

((OOtthheerrwwiissee aaddjjuusstt oonnllyy iiff nnooiissyy))

Every 10,000 miles (16,000 km)((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

Check inflation and condition once a monthCheck oil and coolant at each fuel stop

1016

2032

4064

5080

70112

80128

100160

((OOrr eevveerryy 22 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

130208

140224

((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

Every 160,000 miles (256,000 km)

3048

6096


120192

90144

150240


See information on maintenance and

emission warranty on page .

At 120,000 miles (192,000 km) or 10 years, then every60,000 miles (96,000 km) or 5 years

Every 3 years (independent of mileage)

110176

Check engine oil and coolantCheck tiresReplace engine oil

Rotate tires (follow pattern on page 172 )Replace engine oil filterCheck front and rear brake wearCheck parking brake adjustmentInspect the following items:

Tie rod ends, steering gear box, and bootsSuspension componentsDriveshaft bootsBrake hoses and lines (including ABS)All fluid levels and condition of fluidsExhaust systemFuel lines and connections

Inspect and adjust drive beltsReplace dust and pollen filterReplace air cleaner elementReplace spark plugsInspect valve clearance

Replace CVT fluid

Replace manual transmission fluid

Inspect idle speedInspect idle speedReplace engine coolant

Replace brake fluid

:

1:

2:

For ULEV model

146

For AT-PZEV model

1

2

Main

tenance

Sch

edule

for

Norm

alC

onditio

ns

＊

＊

＊

＃

＊

＃＃

＊

＊

＊

＊

－

Follow the Severe MaintenanceSchedule if you drive your vehicleMAINLY under one or more of thefollowing conditions:

Driving less than 5 miles (8 km) pertrip or, in freezing temperatures,driving less than 10 miles (16 km)per trip.Driving in extremely hot [over 90°F(32°C)] conditions.Extensive idling or long periods ofstop and go driving, such as a taxi ora commercial delivery vehicle.Driving with a roof rack, or drivingin mountainous conditions.Driving on muddy, dusty, or de-icedroads.


Maintenance

Canadian Owners

148

miles x 1,000km x 1,000


1016

2032

4064

5080

70112

80128

100160

Check oil and coolant at each fuel stop

130208

140224

Service the items listed at the indicated distance (or time, if given).

Every 10,000 miles (16,000 km)

Check inflation and condition once a monthEvery 5,000 miles (8,000 km) or every 6 months,

whichever comes first



At 120,000 miles (192,000 km) or 10 years, then every60,000 miles (96,000 km) or 5 years

Every 3 years (independent of mileage)

Every 15,000 miles (24,000 km)

Check engine oil and coolantCheck tiresReplace engine oil

Rotate tires (follow pattern on page 172 )Replace engine oil filterCheck front and rear brake wearLubricate all hinges, locks and latchesInspect the following items:

Tie rod ends, steering gear box, and bootsSuspension components, Driveshaft boots

Check parking brake adjustmentInspect the following items:

Brake hoses and lines (including ABS)All fluid levels and condition of fluidsExhaust system , Fuel lines and connectionsLights and controls/vehicle underbody

Inspect and adjust drive beltsReplace dust and pollen filterReplace air cleaner elementReplace spark plugsInspect valve clearance

Replace CVT fluid

Replace manual transmission fluid

Inspect idle speedInspect idle speedReplace engine coolant

Replace brake fluid

((OOtthheerrwwiissee aaddjjuusstt oonnllyy iiff nnooiissyy))



3048

6096

90144

110176

120192

150240

Every 160,000 miles (256,000 km)

See dust and pollen filter on page for

replacement information under special

driving conditions.

Use normal schedule except in dusty

condition.

See information on maintenance and

emission warranty on page .

1 :

2 :

3 :

:

For ULEV model

4 : For AT-PZEV model

146

167

1

3

4

2

Main

tenance

Sch

edule

for

Seve

reC

onditi

ons

(for Normal and Severe Schedules)

CONTINUED

Maintenance Record

Maintenance 149

5,000 mi

10,000 mi

15,000 mi

20,000 mi

25,000 mi

30,000 mi

35,000 mi

40,000 mi

45,000 mi

50,000 mi

55,000 mi

60,000 mi

65,000 mi

70,000 mi

75,000 mi

80,000 mi

8,000 km

16,000 km

24,000 km

32,000 km(or 1 year)

40,000 km

48,000 km

56,000 km

64,000 km(or 2 years)

Signature or dealer stamp mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

72,000 km

80,000 km

88,000 km


104,000 km

112,000 km

120,000 km



Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page ) or severeconditions (page ). Keep the receipts for all work done on your vehicle.148

147

(for Normal and Severe Schedules)Maintenance Record

Maintenance150

85,000 mi

90,000 mi

95,000 mi

100,000 mi

105,000 mi

110,000 mi

115,000 mi

120,000 mi

125,000 mi

130,000 mi

135,000 mi

140,000 mi

145,000 mi

150,000 mi

155,000 mi

160,000 mi

136,000 km

144,000 km

152,000 km


168,000 km

176,000 km

184,000 km



Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

200,000 km

208,000 km

216,000 km


232,000 km

240,000 km

248,000 km



Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

Fluid Locations

Maintenance 151

RADIATOR CAP

ENGINE OIL DIPSTICK(Orange loop)

ENGINE OILFILL CAP

CONTINUOUSLY VARIABLE TRANSMISSION (CVT)FLUID DIPSTICK (Yellow loop)

BRAKE FLUID(Gray cap)

WASHER FLUID(Blue cap)

ENGINE COOLANTRESERVOIR

CLUTCH FLUID(Manual Transmission only)(Gray cap)

Unscrew and remove the engine oilfill cap on top of the valve cover.Pour in the oil slowly and carefully soyou do not spill. Clean up any spillsimmediately. Spilled oil coulddamage components in the enginecompartment. Install the engine oilfill cap and tighten it securely. Wait afew minutes and recheck the oil level.Do not fill above the upper mark; youcould damage the engine.

The oil viscosity or weight isprovided on the container’s label.A very low-viscosity, fuel-efficient0W-20 oil is the preferred enginelubricant for your Civic Hybrid. Thisspecial oil is formulated to help yourengine use less fuel. It is available atyour Honda dealer. A 5W-20 oil maybe used if 0W-20 is not available.

Oil is a major contributor to yourengine’s performance and longevity.Always use a premium-grade 0W-20detergent oil displaying the APICertification Seal. This seal indicatesthe oil is energy conserving, and thatit meets the American PetroleumInstitute’s latest requirements.

Honda Motor Oil is the preferred0W-20 lubricant for your vehicle. It ishighly recommended that you useHonda Motor Oil in your vehicle for

optimum engine protection. Makesure the API Certification Seal says‘‘For Gasoline Engines’’.

Adding Engine Oil

Maintenance

Recommended Engine Oil

152

API CERTIFICATION SEAL

ENGINE OILFILL CAP

Ambient Temperature

Run the engine until it reachesnormal operating temperature,then shut it off.

Always change the oil and filteraccording to the recommendations inthe maintenance schedule. The oiland filter collect contaminants thatcan damage your engine if they arenot removed regularly.

Changing the oil and filter requiresspecial tools and access fromunderneath the vehicle. The vehicleshould be raised on a service station-type hydraulic lift for this service.Unless you have the knowledge andproper equipment, you should havethis maintenance done by a skilledmechanic.

You may use a synthetic motor oil ifit meets the same requirementsgiven for a conventional motor oil: itdisplays the API Certification Sealand it is the proper weight. You mustfollow the oil and filter changeintervals given on the maintenanceschedule.

Your Honda does not require any oiladditives. Additives may adverselyaffect your engine’s or transmission’sperformance and durability.

Open the hood and remove theengine oil fill cap.

Remove the nine holding clipswith a flat-tipped screwdriver, thenpull the under-cover down.

1.

2.

3.

CONTINUED

Changing the Oil and FilterSynthetic Oil

Engine Oil Additives

Adding Engine Oil, Changing the Oil and Filter

Maintenance 153

HOLDING CLIP

Remove the oil drain bolt andwasher from the bottom of theengine. Drain the oil into anappropriate container.

Remove the oil filter and let theremaining oil drain. A specialwrench (available from yourHonda dealer) is required.

Install a new oil filter according tothe instructions that come with it.

Put a new washer on the drain bolt,then reinstall the drain bolt.Tighten it to:

Refill the engine with the recom-mended oil.

Engine oil change capacity(including filter):

Replace the engine oil fill cap.Start the engine. The oil pressureindicator light should go out within5 seconds. If it does not, turn offthe engine and check your work.

Let the engine run for severalminutes, then check the drain boltand oil filter for leaks.

7.

8.

9.

10.

4. 5.

6.

Changing the Oil and Filter

Maintenance154

DRAIN BOLT

WASHER

OIL FILTER

3.4 US qt (3.2 )

29 lbf·ft (39 N·m , 4.0 kgf·m)

If Honda antifreeze/coolant is notavailable, you may use anothermajor-brand non-silicate coolant as atemporary replacement. Make sure itis a high-quality coolantrecommended for aluminum engines.Continued use of any non-Hondacoolant can result in corrosion,causing the cooling system tomalfunction or fail. Have the coolingsystem flushed and refilled withHonda antifreeze/coolant as soon aspossible.

If the coolant level in the reservetank is at or below the MIN line, addcoolant to bring it up to the MAX line.Inspect the cooling system for leaks.Always use Honda All SeasonAntifreeze/Coolant Type 2. Thiscoolant is pre-mixed with 50 percentantifreeze and 50 percent water.Never add straight antifreeze orplain water.

Turn off the engine, let it sit forseveral minutes, then check the oillevel on the dipstick. If necessary,add more oil.

Put the under-cover back in placeand reinstall the nine holding clips.Lock the clips securely by pushingon the center of each clip.

11.

12.

CONTINUED

Maintenance

Adding Engine Coolant

Changing the Oil and Filter, Engine Coolant

155

NOTICE:

RESERVE TANK

Improper disposal of engineoil can be harmf ul to the environment.If you change your own oil, pleasedispose of the used oil properly. Put itin a sealed container and take it to arecycling center. Do not discard it in atrash bin or dump it on the ground.

If the reserve tank is completelyempty, you should also check thecoolant level in the radiator.

When the radiator and engine arecool, relieve any pressure in thecooling system by turning theradiator cap counterclockwise,without pressing down.

Remove the radiator cap bypushing down and turningcounterclockwise.

The coolant level should be up tothe base of the filler neck. Addcoolant if it is low.Pour the coolant slowly andcarefully so you do not spill. Cleanup any spill immediately; it coulddamage components in the enginecompartment.

Put the radiator cap back on andtighten it.

Pour coolant into the reserve tank.Fill it to halfway between the MAXand MIN marks. Put the cap backon the reserve tank.

Do not add any rust inhibitors orother additives to your vehicle’scooling system. They may not becompatible with the coolant orengine components.

1.

2.

3.

4.

5.

Engine Coolant

Maintenance156

RADIATOR CAP

Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.

Check the fluid level in thewindshield washer reservoir at leastmonthly during normal use.

The low washerlevel indicator will light when thelevel is low.

Fill the reservoir with a good-qualitywindshield washer fluid. Thisincreases the cleaning capability andprevents freezing in cold weather.When you refill the reservoir, cleanthe edges of the windshield wiperblades with windshield washer fluidon a clean cloth. This will help tocondition them.

On Canadian models:

Windshield Washers

Maintenance 157

NOTICE: Do not use engine antif reezeor a vinegar/water solution in thewindshield washer reservoir. Antif reezecan damage your vehicle’s paint, whilea vinegar/water solution can damagethe windshield washer pump. Use onlycommercially-available windshieldwasher f luid.

Always use Honda ATF-Z1(Automatic Transmission Fluid). Ifit’s not available, you may use aDEXRON III automatictransmission fluid as a temporaryreplacement. However, continueduse can affect the shift quality.Have the transmission flushed andrefilled with Honda ATF-Z1 assoon as it is convenient.

Insert the dipstick all the way backin the transmission.

The transmission should be drainedand refilled with new fluid accordingto the time and distance recommen-dations in the maintenance schedule.

To thoroughly flush thetransmission, the technicianshould drain and refill it withHonda ATF-Z1, then drive thevehicle for a short distance. Dothis three times. Then drain andrefill the transmission a final time.

Remove the dipstick (yellow loop)from the transmission, and wipe itwith a clean cloth.

Check the fluid level with the engineat normal operating temperature.

Remove the dipstick and checkthe fluid level. It should bebetween the upper and lowermarks within the HOT range.

Park the vehicle on level ground.Shut off the engine.

Insert the dipstick all the way intothe transmission securely.

If the level is below the lowermark, add fluid into the filler holeto bring it to the level between theupper and lower marks.

3.

4.

5.

1.

2.6.

Automatic Transmission Fluid

Maintenance

Continuously VariableTransmission (CVT)

158

DIPSTICK

UPPERMARK

LOWERMARK

HOTRange

Check the fluid level with thetransmission at normal operatingtemperature and the vehicle sittingon level ground. Remove the under-cover to access the transmissionhousing (see page ). Remove thetransmission filler bolt and carefullyfeel inside the bolt hole with yourfinger. The fluid level should be upto the edge of the bolt hole. If it isnot, add Honda Manual Transmis-sion Fluid (MTF) until it starts to

run out of the hole. Reinstall thefiller bolt and tighten it securely.

If Honda MTF is not available, youmay use an SAE 10W-30 or 10W-40viscosity motor oil with the APICertification seal that says ‘‘FORGASOLINE ENGINES’’ as atemporary replacement. However,motor oil does not contain the properadditives, and continued use cancause stiffer shifting. Replace assoon as it is convenient.

The transmission should be drainedand refilled with new fluid accordingto the time and distance recommen-dations in the maintenance schedule.

153

Maintenance


Manual Transmission Fluid

159

Correct Level

FILLER BOLT

Check the brake fluid level in thereservoirs monthly.

Replace it according to the timerecommendation in the maintenanceschedule.

Always use Honda Heavy DutyBrake Fluid DOT 3. If it is notavailable, you should use only DOT 3or DOT 4 fluid, from a sealedcontainer, as a temporaryreplacement.Using any non-Honda brake fluid cancause corrosion and decrease the lifeof the system. Have the brakesystem flushed and refilled withHonda Heavy Duty Brake FluidDOT 3 as soon as possible.

The fluid level should be betweenthe MIN and MAX marks on the sideof the reservoir. If the level is at orbelow the MIN mark, your brakesystem needs attention. Have thebrake system inspected for leaks orworn brake pads.

The fluid level should be betweenthe MIN and MAX marks on the sideof the reservoir. If it is not, addbrake fluid to bring it up to that level.Use the same fluid specified for thebrake system.

Low fluid level can indicate a leak inthe clutch system. Have this systeminspected as soon as possible.

Brake fluid marked DOT 5 is notcompatible with your vehicle’sbraking system and can causeextensive damage.

Manual Transmission onlyBrake System Clutch System

Brake and Clutch Fluid

Maintenance160

MAX

MIN

MAX

MIN

The headlights were properly aimedwhen your vehicle was new. If youregularly carry heavy items in thetrunk, readjustment may be required.Adjustments should be performed bya Honda dealer or other qualifiedmechanic.

NOTE: Halogen headlight bulbs getvery hot when lit. Oil, perspiration,or a scratch on the glass can causethe bulb to overheat and shatter.

Clean the hood latch assembly with amild cleaner, then lubricate it with amultipurpose grease. Lubricate allthe moving parts (as shown),including the pivot. Follow the timeand distance recommendations inthe Maintenance Schedule. If youare not sure how to clean and greasethe latch, contact your Honda dealer.

Your vehicle has halogen headlightbulb. Handle it by its plastic case andprotect the glass from contact withyour skin or hard objects. If youtouch the glass, clean it withdenatured alcohol and a clean cloth.

CONTINUED

Headlight Aiming Replacing a Headlight Bulb

Maintenance

Hood Latch, Lights

161

PIVOTS

LATCHASSEMBLY

Remove the bulb by turning it one-quarter turn counterclockwise.

Remove the electrical connectorfrom the bulb by pushing on thetab and pulling the connectordown.

Insert the new bulb into the holeand turn it one-quarter turn clock-wise to lock it in place.

Push the electrical connector backonto the bulb. Make sure it is onall the way.

Turn on the headlights to test thenew bulb.

(Driver’s side)Reinstall the upper part of thewindshield washer reservoir.Install the holding clip on the stayand lock it by pushing on thecenter of clip.

Open the hood.If you need to change theheadlight bulb on the driver’s side,remove the holding clip from thestay with a flat-tipped screwdriver,then remove the upper part of thewasher fluid reservoir tank bypulling it out.

2.

4.

5.

6.

1.

3.

7.

Lights

Maintenance162

HOLDING CLIP

BULB

CONNECTOR

TAB

If you are changing the bulb onthe driver’s side, start the engine,turn the steering wheel all the wayto the right, and turn off theengine. If you are changing thebulb on the passenger’s side, turnthe steering wheel to the left.

Use a flat-tipped screwdriver toremove the holding clip from theinner fender, and pull the innerfender cover back.

Remove the socket from theheadlight assembly by turning itone-quarter turn counterclockwise.

Remove the bulb from the socketby pushing it in and turning thebulb counterclockwise until itunlocks.

Install the new bulb in the socket.Turn it clockwise to lock it in place.

Insert the socket back into theheadlight assembly. Turn itclockwise to lock it in place.

Test the lights to make sure thenew bulb is working.

Put the inner fender cover in place.Install the holding clip. Lock it inplace by pushing on the center.

2.

4.

5.

6.

1.

3.

7.

8.

Lights

Maintenance

Replacing the Front Side Marker/Turn Signal and Parking LightBulb

163

HOLDING CLIP

SOCKETBULB

Open the trunk.

Remove the screws in the centerof each of the two fasteners on theside of the trunk lining. Pull thelining back.

Determine which of the two bulbsis burned out: stop/taillight/sidemarker light or turn signal light.

Remove the socket by turning itone-quarter turn counterclockwise.


Pull the bulb straight out of itssocket.Push the new bulb straight intothe socket until it bottoms.

Reinstall the socket into the lightassembly by turning it clockwiseuntil it locks.

Reinstall the trunk lining. Makesure it is installed under the edgeof the trunk seal.

Put the fasteners into the holes onthe side of the trunk lining.Reinstall the screws.

1. 2.

3.

4.

5.

6.

7.

8.

Lights

Maintenance

Replacing Rear Bulbs(in Fenders)

164

FASTENERS

BULBS

SOCKETS

Open the trunk.

Determine which of the two bulbsis burned out: taillight or back-uplight.

Remove the socket by turning itone-quarter turn counterclockwise.


Insert the socket back into thelight assembly. Turn it clockwiseto lock it in place.


Open the trunk and remove thesocket from the light assembly byturning it one-quarter turn counter-clockwise.


4.

5.

6.

1.

2.

3.

1.

2.

CONTINUED

Lights

Maintenance

Replacing Rear Bulbs(in Trunk Lid)

Replacing a High-mount BrakeLight Bulb

165

BULBS

SOCKETS

BULB

SOCKET

Reinstall the socket. Turn itclockwise until it locks. Make surethe new bulb is working.

If your seat belts get dirty, use a softbrush with a mixture of mild soapand warm water to clean them. Donot use bleach, dye, or cleaningsolvents. Let the belts air dry beforeyou use the vehicle.Dirt build-up in the loops of the seatbelt anchors can cause the belts toretract slowly. Wipe the insides ofthe loops with a clean clothdampened in mild soap and warmwater or isopropyl alcohol.

The driver’s floor mat that camewith your vehicle hooks over thefloor mat anchor. This keeps thefloor mat from sliding forward andpossibly interfering with the pedals.

If you remove the driver’s floor mat,make sure to re-anchor it when youput it back in your vehicle.

3.

On models equipped

Maintenance

Floor MatsSeat Belts

Lights, Seat Belts, Floor Mats

166

LOOP

If you use a non-Honda floor mat,make sure it fits properly and that itcan be used with the floor matanchor. Do not put additional floormats on top of the anchored mat.

This filter removes the dust andpollen that is brought in from theoutside through the heating andcooling system.

Have your Honda dealer replace thisfilter every 30,000 miles (48,000 km)under normal conditions. It shouldbe replaced every 15,000 miles(24,000 km) if you drive primarily inurban areas that have highconcentrations of soot in the air, or ifthe flow from the heating andcooling system becomes less thanusual.

Maintenance

Floor Mats, Dust and Pollen Filter

Dust and Pollen Filter

167

Check the condition of the wiperblades at least every six months.Replace them if you find signs ofcracking in the rubber, areas that aregetting hard, or if they leave streaksand unwiped areas when used.

Raise the wiper arm off thewindshield.

Disconnect the blade assemblyfrom the wiper arm by pushing inthe lock tab. Hold the lock tab inwhile you push the blade assemblytoward the base of the arm.

Remove the blade from its holderby grasping the tabbed end of theblade. Pull firmly until the tabscome out of the holder.

2.

1.

3.

Wiper Blades

Maintenance168

LOCK TAB BLADE

Examine the new wiper blades. Ifthey have no plastic or metal rein-forcement along the back edge,remove the metal reinforcementstrips from the old wiper blade,and install them in the slots alongthe edge of the new blade.

Slide the new wiper blade into theholder until the tabs lock.

Slide the wiper blade assemblyonto the wiper arm. Make sure itlocks in place.

Lower the wiper arm down againstthe windshield.

To safely operate your vehicle, yourtires must be the proper type andsize, in good condition with adequatetread, and correctly inflated.

The following pages give moredetailed information on how to takecare of your tires and what to dowhen they need to be replaced.

4.

5.

6.

7.

Wiper Blades, Tires

Maintenance

Tires

169

BLADE

REINFORCEMENT

Using tires that are excessivelyworn or improperly inflated cancause a crash in which you canbe seriously hurt or killed.

Follow all instructions in thisowner’s manual regarding tireinflation and maintenance.

The following chart shows therecommended cold tire pressures formost normal driving conditions andspeed.

Keeping the tires properly inflatedprovides the best combination ofhandling, tread life, and ridingcomfort.

Underinflated tires wear unevenly,adversely affect handling and fueleconomy, and are more likely tofail from being overheated.

We recommend that you visuallycheck your tires every day. If youthink a tire might be low, check itimmediately with a tire gauge.

Overinflated tires can make yourvehicle ride more harshly, aremore prone to damage from roadhazards, and wear unevenly.

The compact spare tire pressure is:

Honda strongly recommends thatyou not drive faster than postedspeed limits and conditions allow. Ifyou decide it is safe to drive at highspeeds, be sure to adjust the cold tirepressures as shown in the nextcolumn. If you do not adjust the tirepressure, excessive heat can build upand cause sudden tire failure.

Tire Size Cold Tire Pressurefor Normal Driving

Tire Size Cold Tire Pressurefor Speed over 100mph (160 km/h)

Tires

Maintenance

Recommended Tire Pressures forNormal Driving

Tire Pressure Adjustment for HighSpeed Driving

Inflation

170

P185/70R14 87S

P185/70R14 87S

30 psi (210 kPa , 2.1kgf/cm )

35 psi (240 kPa , 2.4kgf/cm )

60 psi (420 kPa , 4.2 kgf/cm )

For convenience, the recommendedtire sizes and cold air pressures areon a label on the driver’s doorjamb.

For additional technical information,see page .

Use a gauge to measure the airpressure at least once a month. Eventires that are in good condition maylose one to two psi (10 to 20 kPa, 0.1to 0.2 kgf/cm ) per month.Remember to check the spare tire atthe same time.

Check the pressure in the tires whenthey are cold. This means the vehiclehas been parked for at least threehours, or driven less than 1 mile (1.6km).

Add or release air, if needed, tomatch the recommended cold tirepressures on page .

If you check the pressure when thetires are hot (driven for severalmiles), you will see readings 4 to 6psi (30 to 40 kPa, 0.3 to 0.4 kgf/cm )higher than the cold reading. This isnormal; do not release air to matchthe cold pressure.

Tubeless tires have some ability toself-seal if they are punctured. Youshould look closely for punctures if atire starts losing pressure.

You should get your own tirepressure gauge and use it wheneveryou check your tire pressures. Thiswill make it easier for you to tell if apressure loss is due to a tire problemand not due to a variation betweengauges.

Every time you check inflation, youshould also examine the tires fordamage, foreign objects, and wear.You should look for:

Bumps or bulges in the tread orside of the tire. Replace the tire ifyou find either or these conditions.

Cuts, splits, or cracks in the sideof the tire. Replace the tire if youcan see fabric or cord.

Excessive tread wear.

206

170

CONTINUED

Tires

Maintenance

Tire Inspection

171

In addition to proper inflation,correct wheel alignment helps todecrease tire wear. If you find a tireis worn unevenly, have your dealercheck the wheel alignment.

Have your dealer check the tires ifyou feel a consistent vibration whiledriving. A tire should always berebalanced if it is removed from thewheel. When you have new tiresinstalled, make sure they arebalanced. This increases ridingcomfort and tire life. For best results,have the installer perform a dynamicbalance.

To help increase tire life anddistribute wear more evenly, rotatethe tires every 10,000 miles (16,000km). Move the tires to the positionsshown in the chart each time theyare rotated. If you purchasedirectional tires, rotate only front-to-back.

Your vehicle’s tires have wear indica-tors molded into the tread. When thetread wears down to that point, youwill see a 1/2 inch (12.7 mm) wideband running across the tread. Thisshows there is less than 1/16 inch(1.6 mm) of tread left on the tire. Atire that is this worn gives very littletraction on wet roads. You shouldreplace the tire if you can see thetread wear indicator in three or moreplaces around the tire.

Tires

Maintenance

Tire Maintenance Tire Rotation

172

INDICATOR LOCATION MARKS

TREAD WEAR INDICATOR

Front Front

(Front Non-directionalTires and Wheels)

(Front DirectionalTires and Wheels)

＋

Wheels:

If you ever replace a wheel, makesure that the wheel’s specificationsmatch those of the original wheels.

See page for DOT tire qualitygrading information, and page

for tire size explanation.

Tires marked ‘‘M S’’ or ‘‘AllSeason’’ on the sidewall have an all-weather tread design suitable formost winter driving conditions.

For the best performance in snowyor icy conditions, you should installsnow tires or tire chains. They maybe required by local laws undercertain conditions.

If you mount snow tires on yourHonda, make sure they are radialtires of the same size and load rangeas original tires. Mount snow tires onall four wheels. The tractionprovided by snow tires on dry roadsmay be lower than your original tires.Check with the tire dealer formaximum speed recommendations.

Replace your tires with radial tires ofthe same size, load range, speedrating and maximum cold tirepressure rating (as shown on thetire’s side wall).Mixing radial and bias-ply tires onyour vehicle can reduce brakingability, traction, and steeringaccuracy. Using tires of a differentsize or construction can cause theABS to work inconsistently.

It is best to replace all four tires atthe same time. If that is not possibleor necessary, replace the two fronttires or two rear tires as a pair.Replacing just one tire can seriouslyaffect your vehicle’s handling.

Tires:

206

207

Wheel and Tire Specifications

Replacing Tires

Winter Driving

Snow Tires

Maintenance

Tires

173

14 x 5 1/2 JJ

P185/70R14 87S

Installing improper tires on yourvehicle can affect handling andstability. This can cause a crashin which you can be seriouslyhurt or killed.

Always use the size and type oftires recommended in thisowner’s manual.

Because your Honda has limited tireclearance, mount only SAE Class ‘‘S’’cable-type traction devices, withrubber chain tensioners on the fronttires. Use traction devices only whenrequired by driving condition or locallaws. Make sure they are the correctsize for your tires. Metal link-type‘‘chains’’ should not be used.

When installing cables, follow themanufacturer’s instructions, andmount them as tight as you can.Make sure they are not contactingthe brake lines or suspension. Driveslowly with them installed. If youhear them coming into contact withthe body or chassis, stop andinvestigate. Remove them as soon asyou begin driving on cleared roads.

Tires

Tire Chains

Maintenance174

NOTICE: Traction devices that are thewrong size or improperly installed candamage your vehicle’s brake lines,suspension, body, and wheels. Stopdriving if they are hitting any part ofthe vehicle.

－

Check the condition of the batterymonthly by looking at the testindicator window. The label on thebattery explains the test indicator’scolors.

If additional battery maintenance isneeded, see your Honda dealer or aqualified technician.

Battery posts,terminals, and related accessoriescontain lead and lead compounds.

Check the terminals for corrosion (awhite or yellowish powder). Toremove it, cover the terminals with asolution of baking soda and water. Itwill bubble up and turn brown. Whenthis stops, wash it off with plainwater. Dry off the battery with acloth or paper towel. Coat theterminals with grease to help preventfurther corrosion.

If you need to connect the battery toa charger, disconnect both cables toprevent damaging your vehicle’selectrical system. Always disconnectthe negative ( ) cable first, andreconnect it last.

Maintenance

WARNING:

Wash your hands after handling.

Checking the Battery

175

TEST INDICATOR WINDOW

The battery gives off explosivehydrogen gas during normaloperation.

A spark or flame can cause thebattery to explode with enoughforce to kill or seriously hurt you.

Wear protective clothing and aface shield, or have a skilledmechanic do the batterymaintenance.

Fill the fuel tank.

Change the engine oil and filter.

Block the rear wheels.

If the vehicle is to be stored for alonger period, it should besupported on jackstands so thetires are off the ground.

Wash and dry the exteriorcompletely.

Clean the interior. Make sure thecarpeting, floor mats, etc. arecompletely dry.

If you need to park your vehicle foran extended period (more than onemonth), there are several things youshould do to prepare it for storage.Proper preparation helps preventdeterioration and makes it easier toget your vehicle back on the road. Ifpossible, store your vehicle indoors. Leave one window open slightly (if

the vehicle is being storedindoors).

Cover the vehicle with a‘‘breathable’’ cover, one madefrom a porous material such ascotton. Non-porous materials, suchas plastic sheeting, trap moisture,which can damage the paint.

To minimize sticking, apply asilicone spray lubricant to all doorand trunk seals. Also, apply avehicle body wax to the paintedsurfaces that mate with the doorand trunk seals.

Support the front wiper bladearms with a folded towel or rag sothey do not touch the windshield.

If you store your vehicle for 12months or longer, have your Hondadealer perform the inspections calledfor in the 24 months/30,000 milesmaintenance schedule (NormalConditions) as soon as you take itout of storage (see page ). Thereplacements called for in themaintenance schedule are notneeded unless the vehicle hasactually reached that time or mileage.

Leave the parking brake off. Putthe transmission in Reverse (5-speed manual) or Park (CVT).

Disconnect the 12 volt battery.

Reconnect the 12 volt battery anddrive your vehicle every month forabout 30 minutes. This will keepthe IMA battery charged and ingood condition.

147

Maintenance

Vehicle Storage

176

This section covers the morecommon problems that motoristsexperience with their vehicles. Itgives you information about how tosafely evaluate the problem and whatto do to correct it. If the problem hasstranded you on the side of the road,you may be able to get going again.If not, you will also find instructionson getting your vehicle towed.

......................Compact Spare Tire . 178....................Changing a Flat Tire . 179

.............If the Engine Won’t Start . 184................................Jump Starting . 186

..............If the Engine Overheats . 187.........Low Oil Pressure Indicator . 190..........Charging System Indicator . 191

.......Malfunction Indicator Lamp . 192...............Brake System Indicator . 193

..............................................Fuses . 194..............................Fuse Locations . 197

......................Emergency Towing . 199

Taking Care of the Unexpected

Taking Care of the Unexpected 177

Check the inflation pressure of thecompact spare tire every time youcheck the other tires. It should beinflated to:

Follow these precautions:

Never exceed 50 mph (80 km/h).

This tire gives a harsher ride andless traction on some road sur-faces. Use greater caution whiledriving.

Do not mount snow chains on it.

Use the compact spare tire as atemporary replacement only. Getyour regular tire repaired or replacedand put it back on your vehicle assoon as you can.

Do not use your compact sparetire on another vehicle unless it isthe same make and model. Replace the tire when you can see

the tread wear indicator bars. Thereplacement should be the same sizeand design tire, mounted on thesame wheel. The spare tire is notdesigned to be mounted on a regularwheel, and the spare wheel is notdesigned for mounting a regular tire.

Compact Spare Tire

Taking Care of the Unexpected178

INDICATOR LOCATION MARK

TREAD WEAR INDICATOR BAR

60 psi (420 kPa , 4.2 kgf/cm )

If you have a flat tire while driving,stop in a safe place to change it.Drive slowly along the shoulder untilyou get to an exit or an area to stopthat is far away from the traffic lanes.

Open the trunk. Raise the trunkfloor mat and the trunk floor bylifting up on the back edge.

Take the tool kit out of the trunk.

Unscrew the wing bolt and takethe spare tire out of its well.

Turn on the hazard warning lights,and turn the ignition switch toLOCK (0). Have all thepassengers get out of the vehiclewhile you change the tire.

Park the vehicle on firm, level andnon-slippery ground. Put thetransmission in Park (automatic)or Reverse (manual). Apply theparking brake.

5.

4.

3.

2.

1.

CONTINUED

Changing a Flat Tire


SPARE TIRE TRUNK FLOOR

JACKTOOL KIT

The vehicle can easily roll offthe jack, seriously injuringanyone underneath.

Follow the directions forchanging a tire exactly, andnever get under the vehiclewhen it is supported only by thejack.

Turn the jack’s endcounterclockwise to loosen it, thenremove the jack.

Loosen each wheel nut 1/2 turnwith the wheel wrench.

Place the jack under the jackingpoint. Turn the end bracketclockwise until the top of the jackcontacts the jacking point. Makesure the jacking point tab isresting in the jack notch.

6. 7. 8.



JACK

WHEEL WRENCH

JACKING POINTS

Use the extension and wheelwrench as shown to raise thevehicle until the flat tire is off theground.

Remove the flat tire. Place the flattire on the ground with the outsidesurface facing up.

Before mounting the spare tire,wipe any dirt off the mountingsurface of the wheel and hub witha clean cloth. Wipe the hubcarefully; it may be hot fromdriving.

9. 11.10.

CONTINUED



WHEEL WRENCH EXTENSION

BRAKE HUB

Put on the spare tire. Put thewheel nuts back on finger-tight,then tighten them in a crisscrosspattern with the wheel wrenchuntil the wheel is firmly againstthe hub. Do not try to tightenthem fully.

Lower the vehicle to the groundand remove the jack.

Tighten the wheel nuts securely inthe same crisscross pattern. Havethe wheel nut torque checked atthe nearest automotive servicefacility.Tighten the wheel nuts to:

Remove the center cap beforestoring the flat tire in the trunkwell.

Place the flat tire face down in thespare tire well.

Remove the spacer cone from thewing bolt, turn it over, and put itback on the bolt.

Secure the flat tire by screwingthe wing bolt back into its hole.

12.

13.

14.

15.

16.

17.

18.



WING BOLT SPACERCONE

80 lbf·ft (108 N·m , 11 kgf·m)

Store the jack in the trunk with theend bracket on the left side. Turnthe jack’s end bracket to lock it inplace. Store the tool kit.

Store the wheel cover or centercap in the trunk. Make sure it doesnot get scratched or damaged.

Lower the trunk floor and trunkfloor mat, then close the trunk lid.

19.

20.

21.



Loose items can fly around theinterior in a crash and couldseriously injure the occupants.

Store the wheel, jack, and toolssecurely before driving.

Diagnosing why your engine won’tstart falls into two areas, dependingon what you hear when you turn thekey to START (III):

You hear nothing, or almostnothing. The engine’s startermotor does not operate at all, oroperates very slowly.

You can hear the starter motoroperating normally, or the startermotor sounds like it is spinningfaster than normal, but the enginedoes not start up and run.

When you turn the ignition switch toSTART (III), you do not hear thenormal noise of the engine trying tostart. You may hear a clicking soundor series of clicks, or nothing at all.

Check the transmission interlock.If you have a manual transmission,the clutch pedal must be pushedall the way to the floor or thestarter will not operate. With anautomatic transmission, it must bein Park or Neutral.

Turn the ignition switch to ON (II).Turn on the headlights and checktheir brightness. If the headlightsare very dim or don’t light at all,the battery is discharged. See

on page .

Turn the ignition switch to START(III). If the headlights do not dim,check the condition of the fuses. Ifthe fuses are OK, there isprobably something wrong withthe electrical circuit for theignition switch or starter motor.You will need a qualifiedtechnician to determine theproblem (seeon page ).

Check these things:

If the headlights dim noticeably orgo out when you try to start theengine, either the battery is dis-charged or the connections arecorroded. Check the condition ofthe battery and terminal connec-tions (see page ). You canthen try jump starting the vehiclefrom a booster battery (see page

).

199

175

186186

If the Engine Won’t Start


Nothing Happens or the StarterMotor Operates Very Slowly

Jump Starting

Emergency Towing

184

In this case, the starter motor’sspeed sounds normal, or even fasterthan normal, when you turn theignition switch to START (III), butthe engine does not run.

Are you using a properly codedkey? An improperly coded key willcause the immobilizer systemindicator in the instrument panelto blink rapidly (see page ).

Are you using the proper startingprocedure? Refer to

on page .

Do you have fuel? Check the fuelgauge; the low fuel indicator maynot be working.

There may be an electricalproblem, such as no power to thefuel pump. Check all the fuses(see page ).

If you find nothing wrong, you willneed a qualified technician to findthe problem. See

on page .

71

129

199

194

If the Engine Won’t Start

The Starter Operates Normally

Starting theEngine

EmergencyTowing


－

＋

＋

Although this seems like a simpleprocedure, you should take severalprecautions.

If the booster battery is in anothervehicle, have an assistant startthat vehicle and run it at a fast idle.

Connect the second jumper cableto the negative ( ) terminal onthe booster battery. Connect theother end to the metal projectionas shown. Do not connect thisjumper cable to any other part ofthe engine.

You cannot start a Honda with anautomatic transmission (CVT) bypushing or pulling it.

Open the hood, and check thephysical condition of the 12 voltbattery. In very cold weather,check the condition of theelectrolyte. If it seems slushy orlike ice, do not try jump startinguntil it thaws.

Connect one jumper cable to thepositive ( ) terminal on yourbattery. Connect the other end tothe positive ( ) terminal on thebooster battery.

Turn off all the electrical acces-sories: heater, A/C, stereo system,lights, etc. Put the transmission inNeutral or Park, and set theparking brake.

1.

2.

3.

4.

5.

Jump Starting


To Jump Start Your Vehicle:

186

NOTICE:

A battery can explode if you donot follow the correct procedure,seriously injuring anyonenearby.

Keep all sparks, open flames,and smoking materials awayfrom the battery.

If a battery sits in extremecold, the electrolyte inside can f reeze.Attempting to jump start with a f rozenbattery can cause it to rupture.

Start your vehicle. If the startermotor still operates slowly, checkthat the jumper cables have goodmetal-to-metal contact.

Once your vehicle is running,disconnect the negative cable fromyour vehicle, then from thebooster battery. Disconnect thepositive cable from your vehicle,and then from the booster battery.

Keep the ends of the jumper cablesaway from each other and any metalon the vehicle until everything isdisconnected. Otherwise, you maycause an electrical short.

If your vehicle’s 12 volt battery isdisconnected or goes dead, the IMAbattery level gauge reading may notbe correct the next time you turn theignition switch to ON (II). It mayshow less than the actual leveltemporarily. It will show the correctlevel after you drive for at least 30

minutes.

The reading on your vehicle’stemperature gauge should stay inthe midrange. If it climbs to the redmark, you should determine thereason (hot day, driving up a steephill, etc.).

If your vehicle overheats, you shouldtake immediate action. The onlyindication may be the temperaturegauge climbing to or above the redmark. Or you may see steam orspray coming from under the hood.

7.

6.

CONTINUED


Jump Starting, If the Engine Overheats

If the Engine Overheats

187

NOTICE:

Steam and spray from anoverheated engine canseriously scald you.

Do not open the hood if steamis coming out.

Driving with thetemperature gauge pointer at the redmark can cause serious damage toyour engine.

Safely pull to the side of the road.Put the transmission in Neutral orPark, and set the parking brake.Turn off all the accessories, andturn on the hazard indicator.

If you see steam and/or spraycoming from under the hood, turnoff the engine. Wait until you seeno more signs of steam or spray,then open the hood.

If you do not see steam or spray,leave the engine running andwatch the temperature gauge. Ifthe high heat is due to overloading,the engine should start to cooldown almost immediately. If itdoes, wait until the temperaturegauge comes down to the midpoint,then continue driving.

If the temperature gauge stays atthe red mark, turn off the engine.

Look for any obvious coolant leaks,such as a split radiator hose.Everything is still extremely hot,so use caution. If you find a leak, itmust be repaired before youcontinue driving (see

on page ).

If you don’t find an obvious leak,check the coolant level in theradiator reserve tank. Add coolantif the level is below the MIN mark.

1.

2.

3.

4.

5.

6.

199



EmergencyTowing

188

Using gloves or a large heavycloth, turn the radiator capcounterclockwise without pushingdown to the first stop. After thepressure releases, push down onthe cap, and turn it until it comesoff.

Start the engine, and set thetemperature control dial tomaximum. Add coolant to theradiator up to the base of the fillerneck. If you do not have theproper coolant mixture available,you can add plain water.Remember to have the coolingsystem drained and refilled withthe proper mixture as soon as youcan.

Put the radiator cap back ontightly. Run the engine and watchthe temperature gauge. If it goesback to the red mark, the engineneeds repair (see

on page ).

If the temperature stays normal,check the coolant level in theradiator reserve tank. If it hasgone down, add coolant to theMAX mark. Put the cap back ontightly.

If there was no coolant in thereserve tank, you may need to addcoolant to the radiator. Let theengine cool down until the readingreaches the middle of thetemperature gauge, or lower,before checking the radiator.

8.

9.

10.

11.

7.

199



EmergencyTowing

189

Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.

The engine running generates the oilpressure. When the Auto Idle Stop isactivated, the engine is stopped, theoil pressure is dropped, and the lowoil pressure indicator does not light.

Start the engine, and watch the oilpressure indicator. If it does not goout within 10 seconds, turn off theengine. There is a mechanicalproblem that needs to be repairedbefore you can continue driving.(See on page

).

If necessary, add oil to bring thelevel back to the full mark on thedipstick (see page ).

Let the vehicle sit for a minute.Open the hood, and check the oillevel (see page ). An enginevery low on oil can lose pressureduring cornering and other drivingmaneuvers.

Safely pull off the road, and shutoff the engine. Turn on the hazardwarning indicators.

This light should nevercome on when the engine isrunning. If it starts flashing

or stays on, the oil pressure hasdropped very low or lost pressure.Serious engine damage is possibleand you should take immediateaction.

1.

2.

3.

4.

118

199

152


Low Oil Pressure Indicator

Emergency Towing

190

NOTICE: Running the engine with lowoil pressure can cause seriousmechanical damage almost immediately.Turn of f the engine as soon as you cansaf ely get the vehicle stopped.

－－

If the Auto Idle Stop is active for anextended period, the chargingsystem indicator may come on. If ithappens, start the engine.

The charging system indicator mayalso come on if the Integrated MotorAssist (IMA) battery charge dropsbelow a desired level and the enginestarts to recharge the battery.

This indicator may blink after youstart the vehicle in the morningwhen the temperature is below 20°F ( 30°C). It will stop blinkingwhen the IMA battery warms up.

If the charging systemindicator comes on brightlywhen the engine is running,

the 12 volt battery is not beingcharged.

Immediately turn off all electricalaccessories. Try not to use otherelectrically operated controls such asthe power windows and rear windowdefogger. Keep the engine running;starting the engine will discharge thebattery rapidly.

Go to a service station or garagewhere you can get technicalassistance.


Charging System Indicator

191

If your vehicle battery has beendisconnected or gone dead, thesecodes are erased. It takes at leastthree days of driving under variousconditions to set the codes again.

To check if they are set, turn theignition to ON (II), without startingthe engine. The MalfunctionIndicator Lamp will come on for 20seconds. If it then goes off, thereadiness codes are set. If it blinks 5times, the readiness codes are notset. If possible, do not take yourvehicle for a state emissions testuntil the readiness codes are set.Refer to State Emissions Testing formore information (see page ).

If the indicator comes on repeatedly,even though it may turn off as youcontinue driving, have the vehiclechecked by the dealer as soon aspossible.

Your vehicle has certain ‘‘readinesscodes’’ that are part of the on-boarddiagnostics for the emissionssystems. In some states, part of theemissions testing is to make surethese codes are set. If they are notset, the test cannot be completed.

If the indicator comes onwhile driving, it means oneof the engine’s emission

control systems may have a problem.Even though you may feel nodifference in your vehicle’sperformance, it can reduce your fueleconomy and cause increasedemissions. Continued operation maycause serious damage.

If you have recently refueled yourvehicle, the indicator coming oncould be a loose or missing fuel fillcap. Tighten the cap until it clicks atleast three times. Tightening the capwill not turn the indicator turn offimmediately; it takes at least threedays of normal driving.

211


Malfunction Indicator Lamp

Readiness Code

192

NOTICE: If you keep driving with theMalf unction Indicator Lamp on, youcan damage your vehicle’s emissioncontrols and the engine. Those repairsmay not be covered by your vehicle’swarranties.

The brake system indicatornormally comes on whenyou turn the ignition switchON (II) and as a reminderto check the parking brake.It will stay lit if you do notfully release the parkingbrake.

If the brake system indicator comeson while driving, the brake fluid levelis probably low. Press lightly on thebrake pedal to see if it feels normal.If it does, check the brake fluid levelthe next time you stop at a servicestation (see page ).

If the fluid level is low, take yourvehicle to the dealer and have thebrake system inspected for leaks orworn brake pads.

However, if the brake pedal does notfeel normal, you should takeimmediate action. A problem in onepart of the system’s dual circuit

design will still give you braking attwo wheels. You will feel the brakepedal go down much farther beforethe vehicle begins to slow down andyou will have to press harder on thepedal.

Slow down by shifting to a lowergear, and pull to the side of the roadwhen it is safe. Because of the longdistance needed to stop, it ishazardous to drive the vehicle. Youshould have it towed and repaired assoon as possible (see

on page ).

If you must drive the vehicle a shortdistance in this condition, driveslowly and carefully.

If the ABS indicator comes on withthis indicator, have the vehicleinspected by your Honda dealerimmediately.

199160

On models equipped with ABS

Brake System Indicator


EmergencyTowing

193

Canada

U.S.

The vehicle’s fuses are located inthree fuse boxes. The interior fusebox is located underneath thesteering column. To open it, turn theknobs as shown.

The under-hood fuse box is locatedin the engine compartment on thedriver’s side.

The secondary fuse box is located inthe engine compartment.

If something electrical in yourvehicle stops working, check for ablown fuse first. Determine from thechart on pages and or thediagram on the fuse box lid, whichfuses control that device. Checkthose fuses first, but check all thefuses before deciding that a blownfuse is the cause. Replace any blownfuses, and check if the device works.

197 198

Checking and Replacing Fuses

Fuses


TABTAB

UNDER-HOOD FUSE BOX SECONDARY FUSE BOXINTERIOR

If you cannot drive the vehiclewithout fixing the problem, and youdo not have a spare fuse, take a fuseof the same rating or a lower ratingfrom one of the other circuits. Makesure you can do without that circuittemporarily (such as the accessorypower socket or radio).

If you replace the blown fuse with aspare fuse that has a lower rating, itmight blow out again. This does notindicate anything wrong. Replace thefuse with one of the correct rating assoon as you can.

Check the smaller fuses in theunder-hood fuse box and all thefuses in the interior fuse box bypulling out each fuse with the fusepuller provided in the under-hoodfuse box.

Look for a burned wire inside thefuse. If it is burned, replace it withone of the spare fuses of the samerating or lower.

Turn the ignition switch to LOCK(0). Make sure the headlights andall other accessories are off.

Remove the cover from the fusebox.

Check each of the large fuses inthe under-hood fuse box bylooking through the top at the wireinside. Remove the screws with aphillips-head screwdriver.

5.

4.1.

2.

3.

Fuses


NOTICE:

BLOWNFUSE

BLOWN

Replacing a f use with onethat has a higher rating greatlyincreases the chances of damaging theelectrical system. If you do not have areplacement f use with the proper ratingf or the circuit, install one with a lowerrating.

If the radio fuse is removed, theaudio system will disable itself. Thenext time you turn on the radio youwill see ‘‘COdE’’ in the frequencydisplay. Use the Preset buttons toenter the five-digit code (see page

).

When the audio system is disabled,the clock setting in the audio systemwill be canceled. You will need toreset the clock according to theinstructions in the audio systemsection on this owner’s manual.

If the replacement fuse of thesame rating blows in a short time,there is probably a seriouselectrical problem in your vehicle.Leave the blown fuse in thatcircuit and have your vehiclechecked by a qualified mechanic.

6.

107

Fuses


－－No. Amps. Circuits Protected

No. Amps. Circuits Protected

1 20 A Cooling Fan

123456789

1011121314151617181920

20 A10 A10 A20 A10 A15 A15 A20 A10 A40 A30 A40 A40 A40 A20 A20 A20 A60 A80 A50 A

Condenser FanIMASmall LightCooling FanHazardFI ECUHorn, StopABS F/SBack UpABS MotorRear DefrosterHeater MotorPower WindowOptionLeft HeadlightDoor LockRight HeadlightEPSBatteryIgnition 1Spare Fuses21 25 7.5A 30A


Fuse Locations

197

UNDER-HOOD AND SECONDARY FUSE BOXES

－

－

＊

＊

＊

＊＊

No. Amps.

No. Amps. Circuits Protected

Circuits Protected

12345

15 A20 A

(10 A)10 A

6789

1011121314151617181920212223242526

7.5 A

7.5 A15 A

7.5 A7.5 A

(7.5 A)10 A10 A

(10 A)7.5 A15 A15 A

7.5 A20 A

7.5 A20 A20 A20 A20 A

7.5 A

Power Window RelayNot UsedAccessory, RadioIgnition Coil EXMeterABS(Daytime running lights )SRSRemote Control Mirrors(SCTY )IMAFuel PumpAccessory Power SocketTurn Signal LightsFront WiperSTS (Steering Switch)Front Right Power WindowFront Left Power WindowRear Left Power WindowRear Right Power WindowCooling Fan Relay

Ignition Coil INLAF Heater(Daytime running lights )FI-ECUNot Used

1 : On Canadian models2 : Optional Security System

1

2

1


Fuse Locations

198

INTERIOR FUSE BOX

－

－

The towtruck uses two pivoting arms that gounder the tires (front or rear) and liftthem off the ground. The other twotires remain on the ground.

If your vehicle needs to be towed,call a professional towing service ororganization. Never tow your vehiclewith just a rope or chain. It is verydangerous.

The operatorloads your vehicle on the back of atruck.

With the front wheels on the ground,it is best to tow the car no fartherthan 50 miles (80 km), and keep thespeed below 35 mph (55 km/h).

If your vehicle is equipped with afront spoiler, remove it beforetowing so it is not damaged.

There are two ways to tow yourvehicle.

If, due to damage, your vehicle mustbe towed with the front wheels onthe ground, do the following:

Release the parking brake.Shift the transmission to Neutral.

Release the parking brake.Start the engine.Shift to D, then to N.Turn off the engine.

5-speed Manual Transmission:

Automatic Transmission (CVT):

Wheel-lif t Equipment

Flat-bed Equipment

This isan acceptable way to tow yourHonda.

This is the best way to trans-port your Honda.

Emergency Towing


NOTICE:

NOTICE:

Improper towing preparationwill damage the transmission. Followthe above procedure exactly. If youcannot shif t the transmission or startthe engine (automatic transmission),your vehicle must be transported withthe f ront wheels of f the ground.

Trying to lif t or tow yourvehicle by the bumpers will causeserious damage. The bumpers are notdesigned to support the vehicle’s weight.

The diagrams in this section giveyou the dimensions and capacities ofyour Honda, and the locations of theidentification numbers. It alsoincludes information you shouldknow about your vehicle’s tires andemissions control systems.

................Identification Numbers . 202................................Specifications . 204

DOT Tire Quality Grading......................(U.S. Vehicles) . 206

Uniform Tire Quality..................................Grading . 206.................................Treadwear . 206

......................................Traction . 206.............................Temperature . 207

.................................Tire Labeling . 207

.......................Emissions Controls . 208.....................The Clean Air Act . 208

Crankcase Emissions Control....................................System . 208

Evaporative Emissions Control....................................System . 208

Onboard Refueling Vapor................................Recovery . 208

...Exhaust Emissions Controls . 209....................PGM-FI System . 209

Ignition Timing Control................................System . 209

Exhaust Gas Recirculation...................(EGR) System . 209

Three Way Catalytic...........................Converter . 209

....................Replacement Parts . 209..Three Way Catalytic Converter . 210

..............State Emissions Testing . 211

Technical Information

Technical Information 201

The Vehicle Identification Number(VIN) is the 17-digit number yourHonda dealer uses to register yourvehicle for warranty purposes. It isalso necessary for licensing andinsuring your vehicle. The easiestplace to find the VIN is on a platefastened to the top of the dashboard.You can see it by looking throughthe windshield on the driver’s side. Itis also on the Certification label at-tached to the driver’s doorjamb, andis stamped on the engine com-partment bulkhead. The VIN is alsoprovided in bar code on theCertification label.

Your vehicle has several identifyingnumbers in various places.

Identif ication Numbers

Technical Information202

VEHICLE IDENTIFICATION NUMBER

CERTIFICATION LABEL

The Engine Number is stamped intothe engine block.

The Transmission Number is on alabel on top of the transmission.

The IMA Motor Number is stampedon the motor housing.

Identif ication Numbers


ENGINE NUMBER

TRANSMISSIONNUMBER

IMA MOTORNUMBER

＊

＊

＊

＊


Specifications

204

Dimensions

Weights

Engine

Capacities

174.8 in (4,440 mm)67.5 in (1,715 mm)56.3 in (1,430 mm)103.1 in (2,620 mm)57.9 in (1,470 mm)57.9 in (1,470 mm)

2.87 x 3.15 in (73.0 x 80.0 mm)82 cu-in (1.339 cm )

10.8

13.2 US gal (50 )11.9 US gal (45 )

1.08 US gal (4.1 )1.06 US gal (4.0 )

1.37 US gal (5.2 )1.35 US gal (5.1 )

3.4 US qt (3.2 )3.2 US qt (3.0 )4.0 US qt (3.8 )1.6 US qt (1.5 )1.7 US qt (1.6 )3.4 US qt (3.2 )5.7 US qt (5.4 )

4.8 US qt (4.5 )2.6 US qt (2.5 )

0.11 US gal (0.4 )

LengthWidthHeightWheelbaseTrack

Gross vehicle weight rating See the certification label attachedto the driver’s doorjamb.

Type

Bore x StrokeDisplacementCompression ratioSpark plugs

Water cooled 4-stroke SOHC VTEC4-cylinder gasoline engine

IFR5G-11KSK16PR-L11

Fuel tank

Enginecoolant

Engine oil

Automatictransmissionfluid (CVT)

Including the coolant in the reserve tank and that remaining in theengine.Reserve tank capacity:Excluding the oil remaining in the engine.

FrontRear

Approx.

1 :

2 :

(NGK)(DENSO)

ULEVAT-PZEV

ChangeManualCVT

TotalManualCVT

Change

Without filterTotalChangeTotalChangeTotal

U.S. VehiclesCanada Vehicles

Manual trans-mission fluid

Including filter

Windshieldwasher reservoir

1

2

－－

－－

＊＊

－－－

－－

－－－－－－－

－

＊

＊

Specifications


Air Conditioning

12 Volt Battery

Fuses

Alignment

Tires

Lights

HFC-134a (R-134a)17.6 19.4 oz (500 550 g)

SP-10

12 V 60 W

12 V 8 W12 V 3 CP12 V 21 W12 V 3 CP12 V 21 W

12 V 21/5 W12 V 21 W

2°20’1°

0°12’

0.00 in (0.0 mm)

P185/70R14 87S

0.08 in (2.0 mm)

12 V12 V

8 W5 W

12 V 35 AH/20 HR

T115/70D14 88M

30 psi (210 kPa , 2.1 kgf/cm )60 psi (420 kPa , 4.2 kgf/cm )

T125/70D15 95M

Refrigerant typeCharge quantityLubricant oil type

Capacity

Interior

Under-hood

Toe-in

Camber

Caster

Size

Pressure

12 V 24/2.2 CP12 V 51 W

Headlights

Front Parking/Front turnsignal/side marker lightsRear turn signal lightsBrake/Taillights/Rear sidemarker lightsBack-up lightsTaillightsHigh-mount brake lightLicense plate lightsCeiling lightSpotlightsTrunk light

See page 198 or the fuse labelattached to the inside of the fusebox door under the steeringcolumn.See page 197 or the fuse boxcover.

FrontRearFrontRearFront

Front/RearSpare

Front/RearSpare

1 : Without ABS2 : With ABS

HighLow

(HB3)(HB4)

1

2

－

Quality grades can be found whereapplicable on the tire sidewallbetween the tread shoulder and themaximum section width. Forexample:

All passenger car tires must conformto Federal Safety Requirements inaddition to these grades.

The treadwear grade is a compara-tive rating based on the wear rate ofthe tire when tested under controlledconditions on a specified governmenttest course. For example, a tiregraded 150 would wear one and one-half (1 1/2) times as well on thegovernment course as a tire graded100. The relative performance oftires depends upon the actual condi-tions of their use, however, and maydepart significantly from the normdue to variations in driving habits,service practices and differences inroad characteristics and climate.

The traction grades, from highest tolowest, are AA, A, B, and C. Thosegrades represent the tire’s ability tostop on wet pavement as measuredunder controlled conditions onspecified government test surfacesof asphalt and concrete. A tiremarked C may have poor tractionperformance.

Warning: The traction gradeassigned to this tire is based onstraight-ahead braking traction tests,and does not include acceleration,cornering, hydroplaning, or peaktraction characteristics.

The tires on your vehicle meet allU.S. Federal Safety Requirements.All tires are also graded fortreadwear, traction, and temperatureperformance according toDepartment of Transportation(DOT) standards. The followingexplains these gradings.

Uniform Tire Quality Grading

Treadwear 200Traction AATemperature A

Treadwear Traction AA, A, B, C


DOT Tire Quality Grading (U.S. Vehicles)

206

－

－

－－

－

－－

－

－

－

－－

The temperature grades are A (thehighest), B, and C, representing thetire’s resistance to the generation ofheat and its ability to dissipate heatwhen tested under controlledconditions on a specified indoorlaboratory test wheel. Sustained hightemperature can cause the materialof the tire to degenerate and reducetire life, and excessive temperaturecan lead to sudden tire failure. Thegrade C corresponds to a level ofperformance, which all passengervehicle tires must meet under theFederal Motor Vehicle SafetyStandard No. 109. Grades B and Arepresent higher levels ofperformance on the laboratory testwheel than the minimum required bylaw.Warning: The temperature grade forthis tire is established for a tire thatis properly inflated and not over-loaded. Excessive speed, underinfla-tion, or excessive loading, either

separately or in combination, cancause heat buildup and possible tirefailure.

Date of manufacture.Tire type code.

Manufacturer’sidentification mark.

This indicates that the tiremeets all requirements ofthe U.S. Department ofTransportation.

Tire Identification Number (TIN) isa group of numbers and letters thatlook like the following example TIN.

Speed symbol (analphabetical code indicatingthe maximum speed rating).

Load index (a numerical codeassociated with the maximumload the tire can carry).

Rim diameter in inches.

Tire construction code (Rindicates radial).

Whenever tires are replaced, theyshould be replaced with tires of thesame size. Following is an exampleof tire size with an explanation ofwhat each component means.

Aspect ratio (the tire’s sectionheight as a percentage of itswidth).

Tire width in millimeters.

Vehicle type (P indicatespassenger vehicle).

The tires that came on your vehiclehave a number of markings. Thoseyou should be aware of are describedbelow.

P

22555

R

1694

V

DOT

B97R

FW6X2202

Temperature A, B, C

Tire Labeling

DOT Tire Quality Grading (U.S. Vehicles), Tire Labeling

Tire Identif ication NumberTire Size


DOT B97R FW6X 2202

P225/55R16 94V

＊

＊

The United States Clean Air Actsets standards for automobileemissions. It also requires thatautomobile manufacturers explain toowners how their emissions controlswork and what to do to maintainthem. This section summarizes howthe emissions controls work.Scheduled maintenance is on page

.

As gasoline evaporates in the fueltank, an evaporative emissionscontrol canister filled with charcoaladsorbs the vapor. It is stored in thiscanister while the engine is off. Afterthe engine is started and warmed up,the vapor is drawn into the engineand burned during driving.

The Onboard Refueling VaporRecovery (ORVR) system capturesthe fuel vapors during refueling. Thevapors are adsorbed in a canisterfilled with activated carbon. Whiledriving, the fuel vapors are drawninto the engine and burned off.

In Canada, Honda vehicles complywith the Canadian Motor VehicleSafety Standards (CMVSS) forEmissions valid at the time they aremanufactured.

The burning of gasoline in yourvehicle’s engine produces several by-products. Some of these are carbonmonoxide (CO), oxides of nitrogen(NOx) and hydrocarbons (HC).Gasoline evaporating from the tankalso produces hydrocarbons. Con-trolling the production of NOx, CO,and HC is important to the environ-ment. Under certain conditions ofsunlight and climate, NOx and HCreact to form photochemical ‘‘smog.’’Carbon monoxide does not contri-bute to smog creation, but it is apoisonous gas.

Your vehicle has a PositiveCrankcase Ventilation System. Thiskeeps gasses that build up in theengine’s crankcase from going intothe atmosphere. The Positive Crank-case Ventilation valve routes them

from the crankcase back to theintake manifold. They are thendrawn into the engine and burned.

145

Crankcase Emissions ControlSystem

Evaporative Emissions ControlSystem

Onboard Refueling VaporRecovery

The Clean Air Act

Emissions Controls


The emissions control systems aredesigned and certified to work to-gether in reducing emissions tolevels that comply with the Clean AirAct. To make sure the emissionsremain low, you should use only newHonda replacement parts or theirequivalent for repairs. Using lowerquality parts may increase theemissions from your vehicle.

The emissions control systems arecovered by warranties separate fromthe rest of your vehicle. Read yourwarranty manual for more informa-tion.

The exhaust emissions controlsinclude four systems: PGM-FI,Ignition Timing Control, ExhaustGas Recirculation and Three WayCatalytic Converter. These foursystems work together to control theengine’s combustion and minimizethe amount of HC, CO, and NOx thatcomes out the tailpipe. The exhaustemissions control systems areseparate from the crankcase andevaporative emissions controlsystems.

The PGM-FI System uses sequentialmultiport fuel injection.It has three subsystems: Air Intake,Engine Control, and Fuel Control.The Engine Control Module (ECM)uses various sensors to determinehow much air is going into theengine. It then controls how muchfuel to inject under all operating con-ditions.

This system constantly adjusts theignition timing, reducing the amountof HC, CO, and NOx produced.

The Exhaust Gas Recirculation(EGR) system takes some of theexhaust gas and routes it back intothe intake manifold. Adding exhaustgas to the air/fuel mixture reducesthe amount of NOx produced whenthe fuel is burned.

The three way catalytic converter isin the exhaust system. Throughchemical reactions, it converts HC,CO, and NOx in the engine’s exhaustto carbon dioxide (CO ), nitrogen(N ), and water vapor.

2

2

Exhaust Emissions Controls Replacement Parts

PGM-FI System

Ignition Timing Control System

Exhaust Gas Recirculation (EGR)System

Three Way Catalytic Converter

Emissions Controls


The three way catalytic convertercontains precious metals that serveas catalysts, promoting chemicalreactions to convert the exhaustgasses without affecting the metals.The catalytic converter is referred toas a three-way catalyst, since it actson HC, CO, and NOx. A replacementunit must be an original Honda partor its equivalent.

The three way catalytic convertermust operate at a high temperaturefor the chemical reactions to takeplace. It can set on fire any com-bustible materials that come near it.Park your vehicle away from highgrass, dry leaves, or other flamma-bles.

A defective three way catalyticconverter contributes to air pollution,and can impair your engine’s per-formance. Follow these guidelines toprotect your vehicle’s three waycatalytic converter.

Always use unleaded gasoline.Even a small amount of leadedgasoline can contaminate thecatalyst metals, making the threeway catalytic converter ineffective.

Keep the engine tuned-up.

Have your vehicle diagnosed andrepaired if it is misfiring, back-firing, stalling, or otherwise notrunning properly.

Three Way Catalytic Converter


THREE WAY CATALYTIC CONVERTER

Make sure the gas tank is nearly,but not completely, full (around3/4).

Make sure the ambienttemperature is between 20° and95°F.

Without touching the acceleratorpedal, start the engine, and let itidle for 20 seconds.

If you take your vehicle for a stateemissions test shortly after thebattery has been disconnected orgone dead, it may not pass the test.This is because of certain ‘‘readinesscodes’’ that must be set in the on-board diagnostics for the emissionssystems. These codes are erasedwhen the battery is disconnected,and set again only after several daysof driving under a variety ofconditions.

If the testing facility determines thatthe readiness codes are not set, youwill be requested to return at a laterdate to complete the test. If you mustget the vehicle re-tested within thenext two or three days, you cancondition the vehicle for re-testingby doing the following.

Make sure the vehicle has beenparked with the engine off for 8hours or more.

Keep the vehicle in Park(automatic transmission) orNeutral (manual transmission).Increase the engine speed to 2,000rpm and hold it there until thetemperature gauge rises to at least1/4 of the scale (approximately 3minutes).

CONTINUED

Testing of Readiness Codes

State Emissions Testing


Then drive in city/suburbantraffic for at least 10 minutes.When traffic conditions allow, letthe vehicle coast for severalseconds without using theaccelerator pedal or the brakepedal.

If the testing facility determines thereadiness codes are still not set, seeyour Honda dealer.

Select a nearby lightly traveledmajor highway where you canmaintain a speed of 50 to 60 mph(80 to 97 km/h) for at least 20minutes. Drive on the highway inD (CVT) or 5th (M/T). Do not usethe cruise control. When trafficallows, drive for 90 secondswithout moving the acceleratorpedal. (Vehicle speed may varyslightly; this is okay.) If you cannotdo this for a continuous 90seconds because of trafficconditions, drive for at least 30seconds, then repeat it two moretimes (for a total of 90 seconds).

State Emissions Testing


....Customer Service Information . 214....................Warranty Coverages . 215

Reporting Safety Defects..........................(U.S. Vehicles) . 216

.....................Authorized Manuals . 217

Warranty and Customer Relations

Warranty and Customer Relations 213

Honda dealership personnel aretrained professionals. They shouldbe able to answer all your questions.If you encounter a problem that yourdealership does not solve to yoursatisfaction, please discuss it withthe dealership’s management. TheService Manager or GeneralManager can help. Almost allproblems are solved in this way.

If you are dissatisfied with thedecision made by the dealership’smanagement, contact your HondaCustomer Service Office.

U.S. Owners:

Canadian Owners:

In Puerto Rico and the U.S. VirginIslands:

When you call or write, please giveus this information:

Vehicle Identification Number(see page )Name and address of the dealerwho services your vehicleDate of purchaseMileage on your vehicleYour name, address, and tele-phone numberA detailed description of theproblemName of the dealer who sold thevehicle to you

202

Customer Service Information

Warranty and Customer Relations214

CUSTOMER RELATIONSRELATIONS AVEC LA CLIENTÈLE

American Honda Motor Co., Inc.Honda Automobile Customer ServiceMail Stop 500-2N-7A1919 Torrance BoulevardTorrance, California 90501-2746

Tel: (800) 999-1009

Honda Canada Inc.715 Milner AvenueToronto, ONM1B 2K8

Tel: 1-888-9-HONDA-9Fax: Toll-free 1-877-939-0909

Toronto (416) 287-4776

Bella InternationalP.O. Box 190816San Juan, Puerto Rico 00919-0816

Tel: (787) 250-4318

－

－

－

－

－

－

－

－

－

Your new Honda is covered by thesewarranties:

covers your new vehicle, except forthe battery, emissions controlsystems, and accessories, againstdefects in materials andworkmanship.

provides proratedcoverage for a replacement batterypurchased from a Honda dealer.

these twowarranties cover your vehicle’s emis-sions control systems. Time, mileage,and coverage are conditional. Pleaseread the warranty manual for exactinformation.

this warranty gives upto 100 percent credit toward areplacement battery.

a seatbelt that fails to function properly iscovered for the useful life of thevehicle.

all exterior body panels arecovered for rust-through from theinside for the specified time periodwith no mileage limit.

Honda Accessories are coveredunder this warranty. Time andmileage limits depend on the type ofaccessory and other factors. Pleaseread your warranty manual fordetails.

covers all Hondareplacement parts against defects inmaterials and workmanship.

providescoverage for as long as the pur-chaser of the muffler owns thevehicle.

Restrictions and exclusions apply toall these warranties. Please read the2004 Honda Warranty Informationbooklet that came with your vehiclefor precise information on warrantycoverages. Your Honda’s originaltires are covered by theirmanufacturer. Tire warranty infor-mation is in a separate booklet.

Please refer to the 2004 WarrantyManual that came with your vehicle.

Warranty Coverages

U.S. Owners

Canadian Owners

New Vehicle Limited Warranty

Replacement Battery LimitedWarranty

Emissions Control Systems DefectsWarranty and EmissionsPerformance Warranty

Original Equipment Battery LimitedWarranty

Seat Belt Limited Warranty

Rust Perforation Limited Warranty

Accessory Limited Warranty

Replacement Parts LimitedWarranty

Replacement Muffler LifetimeLimited Warranty

Warranty and Customer Relations 215

If NHTSA receives similar com-plaints, it may open an investigation,and if it finds that a safety defectexists in a group of vehicles, it mayorder a recall and remedy campaign.However, NHTSA cannot becomeinvolved in individual problemsbetween you, your dealer, orAmerican Honda Motor Co., Inc.

If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform theNational Highway Traffic SafetyAdministration (NHTSA) in additionto notifying American Honda MotorCo., Inc.

To contact NHTSA, you may eithercall the Auto Safety Hotline toll-freeat 1-800-424-9393 (or 366-0123 inWashington D.C. area) or write to:NHTSA, U.S. Department ofTransportation, Washington,D.C. 20590. You can also obtainother information about motorvehicle safety from the Hotline.

Warranty and Customer Relations

Reporting Safety Defects (U.S. Vehicles)

216

＊

＊

＊

－

－

＊２００４

ＨＯＮ

Valid only for sales within the U.S. Canadian owners shouldcontact their authorized Honda dealer.

The publications shown below can be purchased from HelmIncorporated. You can order in any of three ways:

Detach and mail the order form on the right half of this pageCall Helm Inc. at 1-800-782-4356Go online at

If you are interested in other years or models, contact Helm Inc.at 1-800-782-4356

(credit card orders only)

Purchasing Factory Authorized Manuals(U.S. only)

Authorized Manuals

217

ORDER TOLL FREE: 1-800-782-4356

OR

(NOTE: For Credit Card Holder Orders Only)

MINIMUM CREDIT CARD PURCHASE $10.00

Form Description

2004 Honda Civic Hybrid

Service Manual


Electrical Troubleshooting Manual

2001 2004 Honda Civic

Body Repair Manual


Owner’s Manual


Quick Start Guide

Order Form for Previous Years-

Indicate Year and Model Desired

Price

Each

$70.00

$50.00

$44.00

$34.00

$12.00

FREE

Publication

Form Number

61S5B02

61S5B02EL

61S5A30

31S5B620

31S5BQ10

HON-R

PUBLICATION NUMBERVEHICLE MODEL

Name YearQty

Price

Each

Total

Price

GRAND TOTAL

HANDLING CHARGE

Mich. Purchases

Add 6% Sales Tax

TOTAL MATERIAL

$6.95

Prices are subject to change without notice and without incurringobligation.

Monday-Friday 8:00 A.M. 6:00 P.M. EST

By completing this form you can order the materials desired. You canpay by check or money order, or charge to your credit card. Mail toHelm Incorporated at the address shown on the back of the order form.

Prices are subject to change withoutnotice and without incurring obligation.

Orders are mailed within 10 days. Pleaseallow adequate time for delivery.

www. helminc. com

－

－

－

ＳＨＩＰ

ＴＯ

ＰＡＹＭＥＮＴ

This manual covers maintenance and recommendedprocedures for repair to engine and chassis components.It is written for the journeyman mechanic, but is simpleenough for most mechanically-inclined owners to under-stand.

This manual describes the procedures involved in thereplacement of damaged body parts.

This manual complements the Service Manual byproviding in-depth troubleshooting information for eachelectrical circuit in your vehicle.

Authorized Manuals

Service Manual:

Electrical Troubleshooting Manual:

Body Repair Manual:

218

NOTE: Dealers and Companies please provide dealer or company name,and also the name of the person to whose attention the shipment shouldbe sent. For purchases outside U.S.A. please write to the address shownbelow for a quotation.

P.O. BOX 07280·DETROIT, MICHIGAN 48207·1-800-782-4356

Customer Name Attention

Apartment Number

State & Zip CodeCity

Daytime Telephone Number

Check or money order enclosed payable to Helm Inc U.S. funds only.Do not send cash

MasterCard

VISA Check here if your billing address is differentfrom the shipping address shown above.

Account Number Expiration: Mo. Yr.

CUSTOMER SIGNATURE DATE

Street Address No P.O. Box Number

( )

These Publications cannot be returned for credit without receiving advance authorization within 14days of delivery. On returns, a restocking fee may be applied against the original order.

CONTINUED

....................................Accessories . 121ACCESSORY (Ignition Key

.......................................Position) . 72...............Accessory Power Socket . 85

....................Additives, Engine Oil . 153.............................Airbag (SRS) . 10, 22

...Airbags, Additional Information . 22

...Additional Safety Precautions . 28.............................Airbag Service . 28

How the Side Airbag Cutoff......................Indicator Works . 27

..How the SRS Indicator Works . 26How Your Front Airbags

.........................................Work . 22...How Your Side Airbags Work . 25

........................SRS Components . 22................Air Conditioning System . 88

.......................Air Pressure, Tires . 170..................High Speed Driving . 170

.........................Normal Driving . 170......................................Antifreeze . 155

Anti-lock Brakes (ABS)...............................Indicator . 54, 141

...................................Operation . 141

..............Anti-theft, Audio System . 107Anti-theft Steering Column

..............................................Lock . 72..................................Audio System . 94........................Auto Idle Stop . 131, 137

...Automatic Seat Belt Tensioners . 20.............Automatic Speed Control . 109..............Automatic Transmission . 133

..........................Capacity, Fluid . 204...............Checking Fluid Level . 158

.......................................Shifting . 133.Shift Lever Position Indicator . 133

................Shift Lever Positions . 133....................Shift Lock Release . 136

BatteryCharging System

...........................Indicator . 54, 191............................Jump Starting . 186

..............................Maintenance . 175............................Specifications . 205

..............................Before Driving . 113....................................Belts, Seat . 8, 19

.............................Beverage Holder . 85

..................................Booster Seats . 43Brakes

...........Anti-lock System (ABS) . 141.............Break-in, New Linings . 114

....................Bulb Replacement . 161...........................................Fluid . 160

.........................................Parking . 82.................System Indicator . 54, 193........................Wear Indicators . 140

.............................Braking System . 140.................Break-in, New Vehicle . 114

..Brightness Control, Instruments . 67........................Brights, Headlights . 66

Bulb Replacement..........................Back-up Lights . 165

..............................Brake Lights . 164................Front Parking Lights . 163

........Front Side Marker Lights . 163.................................Headlights . 161

.........High-mount Brake Light . 165

.........Rear Side Marker Lights . 164............................Specifications . 205

Bulb Replacement....................Turn Signal Lights . 163

..............................Bulbs, Halogen . 161

Index

A

B

I

＊

............................Capacities Chart . 204.............Carbon Monoxide Hazard . 46

.............................Carrying Cargo . 123Cassette Player

............................................Care . 106...................................Operation . 105

..............CAUTION, Explanation of . ii.........................................CD Care . 101

...................................CD Changer . 100.......CD Changer Error Message . 103

.......................CD Error Message . 102.........................................CD Player . 99

....................................Ceiling Light . 83........................Certification Label . 202

............................................Chains . 174....................Changing a Flat Tire . 179

Changing Oil........................................How to . 153......................................When to . 147

...Charging System Indicator . 54, 191............Checklist, Before Driving . 128

.....................................Child Safety . 29..............................Booster Seats . 43

...................................Child Seats . 29

.....Important Safety Reminders . 29..........................................Infants . 34

............................Large Children . 42.........................................LATCH . 38

...........................Lower Anchors . 37.....................Risks With Airbags . 30

.............................Small Children . 35.........................................Tethers . 41

........Where Should A Child Sit? . 30..................Childproof Door Locks . 73

.........................Clock, Setting the . 108...................................Clutch Fluid . 160

........................CO in the Exhaust . 208............Cold Weather, Starting in . 129

..............................Compact Spare . 178...............Consumer Information . 214

.............Controls, Instruments and . 49Coolant

........................................Adding . 155....................................Checking . 118

.........................Proper Solution . 155...................Temperature Gauge . 63

Crankcase Emissions Control........................................System . 209

................Cruise Control Indicator . 56

............Cruise Control Operation . 109................Cup (Beverage) Holders . 85

..........Customer Relations Office . 216

................DANGER, Explanation of . ii...................................Dashboard . 2, 50

................Daytime Running Lights . 66Daytime Running Lights

.......................................Indicator . 66.................................Dead Battery . 186

............Defects, Reporting Safety . 216..........................Defog and Defrost . 93

................Defogger, Rear Window . 68

................Defrosting the Windows . 93....................................Dimensions . 204

...............Dimming the Headlights . 66Dipstick

..........Automatic Transmission . 158..................................Engine Oil . 118

..........................Directional Signals . 66........Disc Brake Wear Indicators . 140

.....................Disposal of Used Oil . 155Doors

..............Locking and Unlocking . 73

Index

C

D

II

CONTINUED

......................Power Door Locks . 73..........DOT Tire Quality Grading . 206

Downshifting, 5-speed Manual.............................Transmission . 130

...........Driver and Passenger Safety . 5...........................................Driving . 127

....................................Economy . 119..................Dust and Pollen Filter . 167

..............................Economy, Fuel . 119.................Electric Power Steering . 55

..................................Emergencies . 177............................Jump Starting . 186

.......................................Towing . 199.............Hazard Warning Button . 67

............Emergencies on the Road . 177.............Battery, Jump Starting . 186...........Brake System Indicator . 193

................Changing a Flat Tire . 179.....Charging System Indicator . 191

..................Checking the Fuses . 194.....Low Oil Pressure Indicator . 190...Malfunction Indicator Lamp . 191

..................Overheated Engine . 187

...........................Emergency Brake . 82......................Emergency Flashers . 67

......................Emergency Towing . 199............Emergency Trunk Opener . 74

.......................Emissions Controls . 208.............Emissions Testing, State . 211

Engine....Coolant Temperature Gauge . 63

......Engine Speed Limiter . 130, 135..........................If it won’t Start . 184

Malfunction Indicator................................Lamp . 54, 191

........Oil Pressure Indicator . 54, 190

..............Oil, What Kind to Use . 152...............................Overheating . 187

............................Specifications . 204.......................................Starting . 129

.Evaporative Emissions Controls . 208...............................Exhaust Fumes . 46

Expectant Mothers, Use of Seat........................................Belts by . 17

.....................................Fan, Interior . 90

Features, Comfort and................................Convenience . 87

....................Filling the Fuel Tank . 115Filters

.........................Dust and Pollen . 167...............................................Oil . 153

5-speed Manual Transmission...............Checking Fluid Level . 159

................................Shifting the . 130.............Flashers, Hazard Warning . 67

...................Flat Tire, Changing a . 179Fluids

..........Automatic Transmission . 158..........................................Brake . 160.........................................Clutch . 160

..............Manual Transmission . 159..................Windshield Washer . 157

FM Stereo Radio.....................................Reception . 97

..........................Four-way Flashers . 67............................Front Airbags . 10, 22

........................................Front Seat . 77......................................Adjusting . 77

.........................................Airbags . 22

Index

F

E

III

.................................................Fuel . 114......................Fill Door and Cap . 115

...........................................Gauge . 59................Octane Requirement . 114

........................Reserve Indicator . 56........................Tank, Filling the . 115

.....................Fuses, Checking the . 194

...............Gas Mileage, Improving . 119.........................................Gasoline . 114

...............Fuel Reserve Indicator . 56...........................................Gauge . 59

................Octane Requirement . 114........................Tank, Filling the . 115

................Gas Station Procedures . 115Gauges

...Engine Coolant Temperature . 63...............................................Fuel . 59

Gearshift Lever Positions..........Automatic Transmission . 133

5-speed Manual.........................Transmission . 130

........................................Glove Box . 85

.............Halogen Headlight Bulbs . 161..............Hazard Warning Flashers . 67

Headlights........................................Aiming . 161

............Daytime Running Lights . 66..................High Beam Indicator . 56

........................Reminder Beeper . 66........Replacing Halogen Bulbs . 161

...................................Turning on . 66..............................Head Restraints . 78

.......................Heating and Cooling . 88.............High Altitude, Starting at . 129

.................High-Low Beam Switch . 66..............High-mount Brake Light . 165

....................................Hood Latch . 161.......................Hood, Opening the . 117

..................................................Horn . 64...........................Hydraulic Clutch . 160

...Identification Number, Vehicle . 202Ignition

..............................................Keys . 70

...........................................Switch . 72............Timing Control System . 209

...................................................IMA . 55.........Important Safety Precautions . 6

.........................................Indicators . 53...................Auto Idle Stop . 131, 137

..............ABS (Anti-Lock Brake) . 54Brake (Parking and Brake

....................................System) . 54.................................Brake Lamp . 54

........................Charging System . 54.............................Cruise Control . 56

DRL (Daytime Running......................................Lights) . 57

.Electric Power Steering (EPS) . 55...................................High Beam . 56

...............................................IMA . 55........Key (Immobilizer System) . 55

......................................Low Fuel . 56........................Low Oil Pressure . 54

...............Maintenance Required . 58.......................................Seat Belt . 53

...........................Side Airbag Off . 53...............................................SRS . 53

Turn Signal and Hazard...................................Warning . 56

Index

I

H

G

IV

CONTINUED

..............................Washer Level . 56.........Indicators, Instrument Panel . 53

...............................Infant Restraint . 34Infant Seats

......LATCH Anchorage System . 37...........................Lower Anchors . 37

..........Tether Anchorage Points . 41...................Inflation, Proper Tire . 170..................High Speed Driving . 170

.........................Normal Driving . 170...................................Inside Mirror . 81

.............................Inspection, Tire . 171........................Instrument Panel . 2, 51

................Instrument Panel Lights . 53........Instrument Panel Brightness . 67

.................................Interior Lights . 83........................................Introduction . i

.................Jacking up the Vehicle . 180.......................................Jack, Tire . 179

................................Jump Starting . 186

..................................................Keys . 70

.......................Label, Certification . 202.................Lane Change, Signaling . 66

..................Lap/Shoulder Belts . 14, 19...........LATCH Anchorage System . 37

Lights....................Bulb Replacement . 161

.......................................Indicator . 53.........................................Parking . 54

..................................Turn Signal . 56.....................................Load Limit . 124

......LOCK (Ignition Key Position) . 72Locks

.......Anti-theft Steering Column . 72............................Fuel Fill Door . 115

.................................Power Door . 73...........................................Trunk . 74

........................Low Coolant Level . 118.........................Low Fuel Indicator . 56

................................Lower Anchors . 38...Lower Gear, Downshifting to a . 130

...Low Oil Pressure Indicator . 54, 190...Lubricant Specifications Chart . 204

.........................................Luggage . 123...Luggage Cover (Cargo Cover) . 123

..................................Maintenance . 143...Owner Maintenance Checks . 146

.................................Record . 149-150......................Required Indicator . 58

..........................................Safety . 144.............................Schedule . 145-148

.Malfunction Indicator Lamp . 54, 191...................Manual Transmission . 130

........Manual Transmission Fluid . 158...............................Meters, Gauges . 59

..........................Mirrors, Adjusting . 81...............Modifying Your Vehicle . 122

Index

M

J

K

L

V

...................Neutral Gear Position . 135..................New Vehicle Break-in . 114

.....................Normal Shift Speeds . 130...................NOTICE, Explanation of . i

...............Numbers, Identification . 202

...Octane Requirement, Gasoline . 114.........................................Odometer . 60

...............................Odometer, Trip . 60Oil

........................Change, How to . 153......................Change, When to . 147......................Checking Engine . 118..............Pressure Indicator . 54, 190

Selecting Proper Viscosity......................................Chart . 152

...........ON (Ignition Key Position) . 72Onboard Refueling Vapor

....................................Recovery . 208..............................Outside Mirrors . 81

....................Overheating, Engine . 187.......Owner Maintenance Checks . 146

..............Panel Brightness Control . 67........................Park Gear Position . 134

...........................................Parking . 139.................................Parking Brake . 82

Parking Brake and Brake.................System Indicator . 54, 193

.................................Parking Lights . 66..Parking Over Things that Burn . 210

.............................PGM-FI System . 209............................Playing the Radio . 94

....................................Playing a CD . 99..........................Power Door Locks . 73

.................Power Socket Locations . 85..............................Power Windows . 79

.........Pregnancy, Using Seat Belts . 17

.........Protecting Adults and Teens . 11...Additional Safety Precautions . 18

.....Advice for Pregnant Women . 17........................Protecting Children . 29

.....................General Guidelines . 29...........................Protecting Infants . 34

.............Protecting Small Children . 34......................Selecting Child Seats . 36....................Installing a Child Seat . 37

...........Protecting Larger Children . 42

...................Radiator Overheating . 187Radio/CD/Cassette

..............................Sound System . 94...................Readiness Codes . 191, 211

Rear Lights, Bulb......................Replacement . 164, 165

............................Rear View Mirror . 81.................Rear Window Defogger . 68...............Reclining the Seat Backs . 77

.......Recommended Shift Speeds . 128.............................Reminder Lights . 53

.......................Remote Transmitter . 75Replacement Information

..............Dust and Pollen Filter . 167................Engine Oil and Filter . 153

.................................Floor Mats . 166..........................................Fuses . 194

................................Light Bulbs . 161....................................Schedule . 145...................................Seat Belts . 166

...........................................Tires . 169.............................Wiper Blades . 168

Index

N

O

P

R

VI

＊

＊

CONTINUED

Replacing Seat Belts After a............................................Crash . 21

Reserve Tank, Engine...............................Coolant . 118, 155

...............................Restraint, Child . 29..................Reverse Gear Position . 135

................................Rotation, Tire . 172

..................................Safety Belts . 8, 19.........Safety Defects, Reporting . 218

.................................Safety Features . 7.........................................Airbags . 10

.......................................Seat Belts . 8.............Safety Labels, Location of . 47

...............................Safety Messages . ii.....................................Seat Belts . 8, 19

...............Additional Information . 19Automatic Seat Belt

...............................Tensioners . 20................Lap/Shoulder Belt . 14, 19

........................Maintenance . 21, 166Reminder Light and

................................Beeper . 19, 53...................System Components . 19

...............Use During Pregnancy . 17...Wearing a Lap/Shoulder Belt . 14

........................Seats, Adjusting the . 77...............................Serial Number . 202

....................Service Intervals . 147-148

...........................Service Manual . 217.........Service Station Procedures . 115

..........................Setting the Clock . 108.....Shift Lever Position Indicator . 133

........................Shift Lock Release . 136..............................Side Airbags . 10, 25

....................Cutoff Indicator . 27, 53Side Marker Lights, Bulb

..............................Replacement . 163...............................Signaling Turns . 66

.....................................Snow Tires . 173..................................Sound System . 94

Spare Tire......................................Inflating . 178

............................Specifications . 205....................Specifications Charts . 204

................................Speed Control . 109.........................................Spotlights . 83

..........SRS, Additional Information . 22...Additional Safety Precautions . 28

.............................Airbag Service . 28

How the Side Airbag Off......................Indicator Works . 27

How the SRS Indicator.......................................Works . 26

How Your Front Airbags.........................................Work . 22

...How Your Side Airbags Work . 25........................SRS Components . 22

.............................SRS Indicator . 26, 53....START (Ignition Key Position) . 72

..............State Emissions Testing . 211.......................Starting the Engine . 129

In Cold Weather at High..................................Altitude . 129

................With a Dead Battery . 184........Steam Coming from Engine . 188

Steering Wheel..................................Adjustment . 69

.............Anti-theft Column Lock . 72.....................Stereo Sound System . 94

....................Storing Your Vehicle . 176

Index

S

VII

Supplemental Restraint................................System . 10, 22......................................Servicing . 28

.........................SRS Indicator . 26, 53...................System Components . 22

..................................Synthetic Oil . 153

Unexpected, Taking Care..........................................of the . 177

....Uniform Tire Quality Grading . 206........................Unleaded Gasoline . 114

.......Used Oil, How to Dispose of . 155

Taillights, Changing..........................................Bulbs . 164

.Taking Care of the Unexpected . 177....................................Tape Player . 104

Technical Descriptions......DOT Tire Quality Grading . 206.....Emissions Control Systems . 208

..........State Emissions Testing . 212Three Way Catalytic

...............................Converter . 210.................................Tire Labeling . 207

.......................Temperature Gauge . 63..............Tether Anchorage Points . 42

............................Theft Protection . 107..Three Way Catalytic Converter . 210

..................Tilt the Steering Wheel . 69..........................Time, Setting the . 108

....................................Tire Chains . 174.........Tire, How to Change a Flat . 179

...........................Tire Information . 206...............................................Tires . 169

..............................Air Pressure . 170.........................Checking Wear . 171..........................Compact Spare . 178

......DOT Tire Quality Grading . 206......................................Inflation . 170

..................................Inspection . 171..............................Maintenance . 172

...................................Replacing . 173......................................Rotating . 172

...........................................Snow . 173............................Specifications . 205

................................Tire Chains . 174...................Tools, Tire Changing . 179

Towing.....................................A Trailer . 142

..................Emergency Towing . 199...........................Traction Devices . 174

TransmissionChecking Fluid Level,

..............................Automatic . 158Checking Fluid Level,

...................................Manual . 159

..................Fluid Selection . 158, 159..............Identification Number . 203.............Shifting the Automatic . 166

..................Shifting the Manual . 162.....................................Treadwear . 206.......................................Trip Meter . 60

................................................Trunk . 74........................................Opening . 74

...................Open Monitor Light . 56....................................Turn Signals . 66

..................................Vanity Mirror . 84.................Vehicle Capacity Load . 124

......................Vehicle Dimensions . 204....Vehicle Identification Number . 202

.............................Vehicle Storage . 176

Index

T

U

V

VIII

＊

＊

........................................Ventilation . 91.................................................VIN . 202

..................................Viscosity, Oil . 152

.............WARNING, Explanation of . ii.........Warning Labels, Location of . 47

..................Warranty Coverages . 215Washer, Windshield

........Checking the Fluid Level . 157.......................................Indicator . 56.....................................Operation . 65

Wheels...............Adjusting the Steering . 69............Alignment and Balance . 172

..........................Compact Spare . 178......................................Wrench . 180

Windows..................Operating the Power . 79

...........................Rear, Defogger . 68Windshield

.......................................Cleaning . 65.....................................Defroster . 93

.......................................Washers . 65

Wipers, Windshield.......................Changing Blades . 168

.....................................Operation . 65....................................Worn Tires . 172

.....Wrecker, Emergency Towing . 199

: U.S. and Canada only

Index

W

IX

Service Information Summary

Gasoline:

Fuel Tank Capacity:

Recommended Engine Oil:

Brake Fluid:

Tire Pressure (measured cold):

Automatic Transmission Fluid(CVT):

5-speed Manual TransmissionFluid:

30 psi (210 kPa , 2.1 kgf/cm )

60 psi (420 kPa , 4.2 kgf/cm )

13.2 US gal (50 )

3.4 US qt (3.2 )

11.9 US gal (45 )

Unleaded gasoline, pump octanenumber of 86 or higher.

API Premium grade 0W-20detergent oil (see page ).

Oil change capacity (includingfilter):

Honda Heavy Duty Brake FluidDOT 3 preferred, or a DOT 3 orDOT 4 brake fluid as a temporaryreplacement (see page ).

Use Honda ATF-Z1 (AutomaticTransmission Fluid) only

1.6 US qt (1.5 )Capacity (including differential):

Honda Manual TransmissionFluid preferred, or an SAE 10W-30or 10W-40 motor oil as atemporary replacement (see page

).

3.4 US qt (3.2 )Capacity:

Front/Rear:

Spare Tire:

152

159

160ULEV

AT-PZEV

2004 Civic Hybrid Online Reference Owner's...

Documents

Transcript of 2004 Civic Hybrid Online Reference Owner's...