MANUFACTURER OF FORGEDSTEEL & ALUMINUM PARTS —— Harris Thomas Industries, Inc. ——

HIGH-SPEED SEQUENCEPROGRAM CONTROLLEDPNEUMATIC DIE FORGING LINESCNC VERTICAL MACHININGCENTERSKNUCKLE JOINT PRESSESOBI & GAP FRAME PRESSESBAR SHEARSBLAST CLEANINGENGINE LATHESCNC VERTICAL MILLSVERTICAL MILLS

VERTICAL BAND SAWS

HORIZONTAL BAND SAWS

OD GRINDER

SURFACE GRINDERS

GRINDERS/SANDERS

RADIAL DRILL

DRILL PRESSES

ARBOR PRESS

SHOP PRESS

PIPE & BOLT THREADER

FINISHING EQUIPMENT

WELDING EQUIPMENT

INSPECTION

AIR COMPRESSORS & DRYERS

DUST COLLECTION

OVENS

VEHICLES

ROLLING STOCK

BRIDGE CRANES

COMPACTOR

MISCELLANEOUS

Wednesday, July 26, 2006Beginning at 10:00 A.M. EDT1400 East First StreetDayton, Ohio 45403 USA

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEwww.BIDITUP.com

—— Also for Sale: Harris Thomas Industries, Inc. ——

Real Estate

AUCTIONLIVE ON-SITE& WEBCAST

Chambersburg/Ceco Die Forger, Mdl. 23

Minster Mdl. 90-1200

1999 Okuma MC-VAE Vertical Machining Center

199920 ATC

1,200-TON

10,000 RPM

1999

HIGH-SPEED SEQUENCE PROGRAM CONTROLLED PNEUMATIC DIE FORGING LINE

– 2 –BIDITUP AUCTIONS & APPRAISALS WORLDWIDE

www.BIDITUP.com

HIGH-SPEED SEQUENCEPROGRAM CONTROLLED PNEUMATICDIE FORGING LINES

1999 Chambersburg/Ceco Die Forger, MDL. 23, Falling Weight 5,000 LB,Max Blow Energy 23,800 Foot Pounds, Ram Stroke 19", Cylinder Bore 26", DieSpace Between Guides 27 1/4", Ram 24" F-B, Anvil Cap 36" F-B, Closed DieHeight 12"–16", Gerb Isolation Spring System, 2200 Gallon Brunner AirReceiver, Ceco Mark IV Control, S/N M2941 With Yr 2000 American InductionHeating Vibratory Bowl & Shaker/Loader Table, S/N 28474-2-00; BilletFeeder; Yr 2000 American Induction Heating MDL. PS/CS 10003 1000 KWBillet Heater, S/N 28361-1-00;Yr 1995 150-Ton Verson Gap Frame Press, MDL.OBG150, Stroke 8", SPM 50, Bed 30" x 50", Shut Height 21.88", MotorizedAdjustment 6", Air Clutch & Brake, S/N 29165

1988 Chambersburg/Ceco Die Forger,MDL.23,Falling Weight 5,000 LB,MaxBlow Energy 23,800 Foot Pounds,Ram Stroke 19",Cylinder Bore 26",Die SpaceBetween Guides 27 1/4", Ram 24" F-B, Anvil Cap 36" F-B, Closed Die Height12"–16", Gerb Isolation Spring System, Ceco Mark IV Control, S/N M2877-LWith General Kinnamatics MDL. 12798 Vibratory Feeder Bowl & Shaker/Loader Table, S/N C6051-02; Yr 2000 Heating Induction Systems 1000 KWBillet Heater; 150-Ton Verson Gap Frame Press, MDL. OBG150, Stroke 7", SPM60, Bed 30" x 50", Shut Height 28", Motorized Adjustment 6", Air Clutch& Brake, S/N 23185

1986 (Re-Machined 1992) Chambersburg/Ceco Die Forger, MDL. 14,Falling Weight 3,200 LB, Max Blow Energy 14,400 Foot Pounds, Ram Stroke18", Cylinder Bore 20 1/2", Die Space 23" Between Guides, Ram 20 1/2" F-B,Anvil Capacity 30" F-B, Closed Die Height 10"–14", Gerb Isolation SpringSystem, S/N R93440 (2546-L) With Yr 1997 American Induction MDL. VbF87Feeder Bowl, Diameter 72" & Shaker/Loader Table; Tocco MDL. CS12-700-5.5Induction Heater, 875 KW, S/N 12-9204-13; 88 Ton Minster Gap Frame Press,Air Clutch, S/N 2701

Chambersburg/Ceco Die Forger, MDL.14,Falling Weight 3,200 LB,Max BlowEnergy 14,400 Foot Pounds, Ram Stroke 18", Cylinder Bore 20 1/2", Die Space23" Between Guides, Ram 20 1/2" F-B, Anvil Capacity 30" F-B, Closed DieHeight 10"–14", New Base and Columns.

Chambersburg/Ceco Die Forger, Mdl. 23

Verson 150 Ton Trim Press Bowl & Shaker/Loader Table

View of Forging Line

View of Forging Line

150-TON

(2) AVAILABLE

(2) AVAILABLE

1999/1988

CNC VERTICAL MACHINING CENTERS, KNUCKLE JOINT PRESSES

– 4 –FOR LEASE & FINANCE SERVICES - BIDITUP CAPITAL CORPORATION

CALL 818-508-7034

CNC VERTICAL MACHINING CENTERS1999 Okuma Vertical Machining Center, MDL. MC-VAE-60HS, 24.8"x 60.24" Table, Travels: X-59.06", Y-24.8", Z-24.02", Table to Spindle9.05"–33.07",10,000 Max RPM Spindle,20-Position Auto Tool Changer,50Taper, Yoshida Chip Conveyer, Mac Coolant, Full Enclosure, RenishawMP10 Work Probe,Okuma OSP 7000M CNC Control,S/N 1106.0640

12/2002 Hurco Vertical Machining Center, MDL.VM1, 14" x 30" Table,Travels: X-24",Y-14", Z-18",Table to Spindle 4"–22", 8,000 RPM Spindle,16-Position Auto Tool Changer,Cat 40,Coolant,Full Enclosure,Hurco MaxCNC Control,S/N H-V10097/VM1-06020122AE

1994 Lagun Vertical Machining Center,MDL.VMC 3516,16" x 35" Table,Travels: X-24",Y-16", Z-20",Table to Spindle 5 3/4"–25 3/4", 18-PositionAuto Tool Changer,Dynapath Delta Autocon CNC Control,S/N 6177

CNC Tooling & Holders, Renishaw MP10 Probe,Huot Tool Holder Trays

KNUCKLE JOINT PRESSES1,200-Ton Minster Knuckle Joint Press, MDL.90-1200, 40" x 37" Bed,Bolster Plate 5 1/2" Thick, 6" Stroke, 33 3/4" Shut Height, 1/2"Adjustment, 25 SPM, Air Clutch & Brake, SSC 3000 Press Control,S/N #3423

1,200-Ton Bliss Knuckle Joint Press,MDL.28,47" x 37" Bed,Bolster Plate6 3/4" Thick, 6" Stroke, 32 1/4" Shut Height, 1/2" Motorized Adjustment,22 SPM, Air Clutch & Brake, S/N 48659 (Brookville, OH Location – ContactOffice to Make Inspection Arrangements)

1,200-Ton Cleveland Knuckle Joint Press, MDL. 12-K, 47" x 36" Bed,Bolster Plate 7" Thick, 6" Stroke, 33 3/4" Shut Height, 1/2" MotorizedAdjustment, 25 SPM, Helm Loadguard Trend Series 4 Control, Air Clutch& Brake,S/N 10674

1,000-Ton Minster Knuckle Joint Press, MDL. 90-1000-32, 42" x 32"Bed, T-Slotted Bolster Plate 10" Thick, 8" Stroke, 28" Shut Height,1/2" Slide Adjustment, 45 SPM, Up-Acting Mechanical Knock-Out Arm,Helm Loadguard #TLG4500 Monitor, Air Clutch & Brake, Minster ControlS/N 23569

1,000-Ton Bliss-Toledo Knuckle Joint Press, MDL. 666, 37" x 31" Bed,Bolster Plate 6" Thick,5" Stroke,18" Shut Height 1/2" Adjustment,30 SPM,Air Clutch & Brake,S/N 29573 (Brookville,OH Location – Contact Office toMake Inspection Arrangements)

800-Ton Bliss Knuckle Joint Press, MDL. 26, 32" x 26" Bed, T-SlottedBolster Plate 6" Thick,5" Stroke,22" Shut Height,1/2" Adjustment,33 SPM,Trabon Lube,Allen Bradley SLC 150,Air Clutch & Brake,S/N T34917

800-Ton Bliss Knuckle Joint Press, MDL. 26, 32" x 24" Bed, Bolster Plate4" Thick,5" Stroke,20" Shut Height,1/2" Adjustment,33 SPM,Air Clutch &Brake,S/N 35621

800-Ton Cleveland Knuckle Joint Press, MDL. 8K, 36" x 47" Bed,14" Stroke,26 1/2" Shut Height,1/2" Adjustment,14 SPM,Ortlinghaus AirClutch & Brake,S/N 9745-1 (Pontiac,MI location – Contact Office to MakeInspection Arrangements)

600-Ton Bliss-Toledo Knuckle Joint Press, MDL. 664, 24" x 22" Bed,Bolster Plate 4 1/4" Thick 2 1/2" Stroke, 9 " Shut Height, 1/2" MotorizedAdjustment,33 SPM,Allen Bradley Control,Air Clutch & Brake

1999 Okuma MC-VAE Vertical Machining Center

Lagun VMC 3516 Vertical Machining Center

12/2002 Huro VM1

CNC

CNC

16 ATC

18 ATC

20 ATC10,000 RPM

CNC1999

2002

1994

Can’t make it to the auctionin person? Bid live online at

www.BIDITUP.com

WEBCAST

CNC VERTICAL MACHINING CENTERS, KNUCKLE JOINT PRESSES

– 5 –

Register at www.BIDITUP.com and receive auction updates via email.

Minster Mdl. 90-1200 Cleveland Mdl. 12-KBliss Mdl. 28

Minster Mdl. 90-1000 Bliss Mdl. 26Bliss-Toledo Mdl. 666

Crowne Plaza Dayton Hotel33 East 5th StreetDayton, Ohio937-224-0800

Doubletree Hotel Dayton Downtown11 South Ludlow StreetDayton, Ohio937-461-4700

Marriott HotelDayton1414 South Patterson BoulevardDayton, Ohio937-223-1000

LODGING DIRECTIONS From Dayton International Airport (DAY), follow airport exitto I-70 East. Travel east on I-70 for 1.9 miles to I-75 South.Travel south on I-75 for 7.5 miles to Exit 53/First Street/ThirdStreet (exits from left lane). Follow exit for First Street andtravel 1.6 miles east on First Street to Harshman Street (plantat south-east corner of First Street & Harshman Street).

1,200-TON 1,200-TON 1,200-TON

1,000-TON 1,000-TON 800-TON (2) AVAILABLE

OBI & GAP FRAME PRESSES, BAR SHEARS, BLAST CLEANING, ENGINE LATHES, CNC VERTICAL MILLS

– 6 –TO SCHEDULE AN AUCTION OR APPRAISAL

CALL 818.508.7034

OBI & GAP FRAME PRESSES1995 150-Ton Verson Gap Frame Press, MDL. OBG150, 30" x 50" Bed,8" Stroke, 21.88" Shut Height, 6" Motorized Adjustment, 50SPM, AirClutch & Brake,S/N 29165.

150-Ton Verson Gap Frame Press, MDL. OBG150, Stroke 7", SPM 60,Bed 30" x 50", Shut Height 28", Motorized Adjustment 6, Air Clutch &Brake,S/N 23185.

125-Ton Bliss, MDL. 28 1/2, 28" x 37" Bed, 8" Stroke, 17" Shut Height,3 1/2" Adjustment, 40 SPM, Air Clutch & Brake, S/N H-49798 (OffsiteDayton,OH Location)

110-Ton Bliss,MDL.C-110,27" x 42" Bed,Bolster Plate 4" Thick,4" Stroke,20" Shut Height,6" Slide Adjustment,Air Clutch & Brake,S/N H-53242

110-Ton Niagara, MDL. E-5 1/2, 27" x 42" Bed, Bolster Plate, 6" Stroke,23 1/2" Shut Height , 5" Adjustment, 54SPM, Trabon Mark III MaxiMonitor Lube,Air Clutch & Brake,S/N 34229

95-Ton Bliss, MDL. 28, 28" x 37" Bed, 8" Stroke, 17" Shut Height,3" Adjustment, 40 SPM, Air Clutch & Brake, Air Cushion, S/N H-20180(Offsite Dayton,OH Location)

88-Ton Minster, MDL.7,SPM 45,22" x 35" Bed,Bolster Plate 3 1/2" Thick,4 1/4" Stroke, 15 1/2" Shut Height, 8" Adjustment, Air Clutch & Brake,S/N 7-3936

(2) 88-Ton Minster, MDL. 8, Stroke 6", SPM 45, 22" x 35" Bed,BolsterPlate 3 1/2" Thick,13" Shut Height,3 1/2" Adjustment,Air Clutch & Brake,SSC 1500 Part Revolution Control,S/N 2168 & 2589

BAR SHEARS1994 AMD Advanced Machine Design Co Bar Shear, 2" RoundCapacity, 75 HP Motor & Hydraulic Pump, Infeed & Runout Conveyor,S/N 9404

1986 Peddinghaus Mechanical Bar Shear, MDL. CADY 50, 2" RoundCapacity/1-9/16" Square, 20’ Bar Bundler & Loader, Air Clutch,S/N 4053044786004

BLAST CLEANING1997 Pangborn Rotoblast Cleaning System, MDL.V518, Rebuilt bySpinblast Division, MDL.GN1M, 37.3 Cu.Ft., 54" Drum Dia.x 70" Length,Bucket Loader,Torit Dust Collector,S/N 34GNIM-762

Pangborn Rotoblast Cleaning System,MDL.GN,24.3 Cu.Ft.,49" DrumDia.x 54" Length,Bucket Loader,Torit Dust Collector,S/N 23GN643

ENGINE LATHESLeBlond Regal Engine Lathe,24" Swing,96" Centers,14" 3 Jaw Chuck,Steady Rest,Tailstock,25–1,000 RPM

1994 Supermax Engine Lathe, MDL. LE-1338, 13"/19" Swing,42" Centers, 6" 3 Jaw Chuck, 35–2,000 RPM, Steady Rest, Tailstock,English/Metric,S/N 18211-124

LeBlond Engine Lathe, 15" Swing, 36" Centers, 12" 4 Jaw Chuck,30–2,000 RPM,Steady Rest,Tailstock,S/N 3C703

LeBlond Engine Lathe, 15" Swing, 36" Centers, 12" 3 Jaw Chuck,60–2,400 RPM Servo Shift, Steady Rest, Tailstock, Spindle, 4-128,.104"–.0032,S/N 6G-885

CNC VERTICAL MILLS(2) 1995 Lagun CNC Vertical Mill, MDL. 250S, 10" x 42" Table, PowerDraw Bar, Spindle, Variable Speed 60–4,200 RPM, Dynapath DeltaAutocon CNC Control S/N 37513 & 37652

Dah-Lih CNC Vertical Mill, MDL. DL-V600, Table 10" x 48" Table,Power Draw Bar,Variable Speed 60–4,200 RPM, Crusader Series M CNCControl,S/N 79057

800-TON 600-TON

110-TON

110-TON125-TON

95-TON

Cleveland Mdl. 8K

Bliss Mdl. 28 1/2

Niagara Mdl. E-5 1/2

Bliss-Toledo Mdl. 664

Bliss Mdl. C-110

Bliss Mdl. 28

VERTICAL MILLS, VERTICAL BAND SAWS, HORIZONTAL BAND SAWS, OD GRINDER, SURFACE GRINDERS, GRINDERS/SANDERS

– 7 –Can’t make it to the auction in person? Bid live online at

www.BIDITUP.com

VERTICAL MILLS Cincinnati Hydrotel Vertical Milling Machine, MDL. 2864, 28" x 96"T-Slotted Table, Acu-Rite 2-Axis DRO, 360 Deg Hydraulic Tracer, S/N1H3V1Z-53

Cincinnati Hydrotel Vertical Milling Machine, 16" x 52" T-SlottedTable, Acu-Rite 2-Axis DRO, S/N 31301V5U-0010

Rockford Planer Mill, 21 1/2" x 72" T-Slotted Table, 26" Vertical HeadTravel, Power Feed Table, Vertical & Side Cutting Heads, Shaping HeadAttachment, S/N 105UH-04

Starrag-Rigid Twin Spindle Vertical Copy Milling Machine, MDL.KF-200, 23 1/2" x 65" Main Table, 23" x 28" Copy Table, Variable Speed63–2,800 RPM, Inch/Metric, Sokki DRO

Bridgeport Series II Vertical Mill, 11" x 58" Table, 4 HP, Sony 2-AxisDRO, Power Feed,Variable Speed 50–3,500 RPM, S/N 1207

(2) Bridgeport Series I Vertical Mill, 9" x 42" Table, Power Feed, 2 HP,Newall 2-Axis DRO, S/N BR219003 & BR212873

Bridgeport Vertical Mill, 9" x 42" Table, 1 HP,Variable Speed 80–2,700RPM, S/N J-53523

VERTICAL BAND SAWS1994 DoAll 20" Vertical Band Saw, MDL. 2013V, 26" x 26" Tilt Table,Blade Butt Welder, Grind Attachment, S/N 500-94585

DoAll 16" Vertical Band Saw,MDL.16-3,24" x 30 1/2" Table,Blade ButtWelder, Grind Attachment, S/N 50-S-56557

HORIZONTAL BAND SAWSRacine Horizontal Band Saw, 9" x 18" Capacity, 45–110 Cuts PerMinute, High Speed/Low Speed

WF Wells 2-Post Horizontal Band Saw, S/N 801513

OD GRINDER1989 OK MDL. R-6 Optical View Form OD Relieving Grinder,S/N R89329

SURFACE GRINDERSThompson Hydraulic Surface Grinder, MDL. 4B, 14 1/2" x 48"Magnetic Chuck, 15 HP, 18" x 3" Wheel, S/N 4BB56841

Clausing Hydraulic Surface Grinder, MDL. 4020, 10" x 15" MagneticChuck, Power Feed, Neutrofier, S/N 17H-5993

Boyar Schultz Surface Grinder, MDL. 612, 6" x 12" Magnetic Chuck,1 HP, S/N 12094

DoAll Surface Grinder, MDL. D618-7, 6" x 18" Chuck, S/N 219-65187

DoAll Surface Grinder, MDL. DH612, 6" x 12" Chuck, S/N 138-753651

GRINDERS/SANDERSDeckel MDL. SO Carbide Lip Grinder, S/N 80-20125

Sterling MDL. DG2-1/2, Drill Pointer & Grinder, Length 24"

Wilton 6" Belt x 12" Disc Sander, S/N 2060178

Burr King Abrasive Belt Sander

Wilton 20" Disc Sander

Clark 12" Double End Pedestal Grinder

Baldor MDL.B123WD,6" Double End Pedestal Grinder,S/N G8-236-13

Jet MDL. JBG-8A, 6" Double End Pedestal Grinder, S/N 9071231

Baldor MDL. 812RE, Double End Bench Type Grinder, S/N F978

1994 Advanced Machine Bar Shear Pangborn Mdl. GN

1986 Peddinghaus Mdl. CADY 50

2" ROUND

2" ROUND/1-9/16" SQUARE

1997 Pangborn Mdl. V518

1986

1994

1997

RADIAL DRILL, DRILL PRESSES, ARBOR PRESS, SHOP PRESS, PIPE & BOLTTHREADER, FINISHING EQUIPMENT, WELDING EQUIPMENT, INSPECTION

– 8 –TO SCHEDULE AN AUCTION OR APPRAISAL

CALL 818.508.7034

RADIAL DRILLCarlton Radial Arm Drill, MDL. 0A, 3’ Arm x 9" Column,Power Elevation & Clamp, Box Table, Spindle 55–750 RPM,S/N 0A1110

DRILL PRESSESFeeler 24" Drill Press, MDL. S500B, 15" x 19" Table, 1,720RPM, S/N 801110

Wilton 20" Drill Press, MDL. VSG-2025, 80–1,200 RPM,S/N 33108

Enco 20" Drill Press, MDL. 40005, S/N 89-05-0209

DeWalt 20" Drill Press

ARBOR PRESSDake 150 Ton Arbor Press, MDL. 6-650, Air/Hydraulic,Ram Diameter 8", 48" Between Uprights, Adjustable BedHeight, S/N 147451

SHOP PRESSBanner 25 Ton Shop Press, S/N B67621

PIPE & BOLT THREADEROster MDL. 502NE Pipe & Bolt Threader, S/N 1105

FINISHING EQUIPMENTTrinco 3.5 Cubic Foot Vibratory Finisher, MDL. 36x24

Turex 2 Cubic Foot Vibratory Finisher

DC Dry Blast Cabinet, S/N 2662-84

WELDING EQUIPMENTMiller 225 Amp Welder,Portable Base,MDL.Bobcat 2256,AC/DC, 8,000 Watt Auxiliary Power, S/N KC181560

Airco Heliwelder 400 Amp Arc Welder, MDL. 4A/DPR224HPA/B-D, AC/DC Weld, S/N R383396

Lincoln Idealarc 250 Tig Welder, S/N AC-627827

INSPECTION2001 Mitutoyo Crysta Apex Bridge Type CoordinateMeasuring Machine, MDL. CRT-A710, Probe Area 33"x 59", Measuring Range: X-27.75", Y-39.56", Z-23.82",Granite Surface Plate 39.37" x 67.72", Measuring Speed1–8 mm/sec, Renishaw TP20 Probe, Max Work PieceWeight 2,200 Lbs, R-Axis Control, Mitutoyo Checkmate6000 Software, IBM PC, Printer, S/N 0178302

1999 Brown & Sharpe Bridge Type CoordinateMeasuring Machine, MDL. Microxcel PFX-4-5-4,Measuring Range: X-18",Y-20",Z-16",Renishaw MIP ProbeHead, PC, Printer, PC Dimas, S/N 1199-1935

Sheffield Cordax 1805 Coordinate Measuring Machine

Mituyoto Optical Comparator, Code 172-804A,MDL.PH-14LS, 14" Screen, QM-Data200 Control, S/N 200133

MicroVu Spectra Series Optical Comparator, MDL. S14,14" Screen, Q-16 2-Axis Digital Positioning Unit, S/N 5456

Brown & Sharpe “Master View” 14" OpticalComparator & Measuring Machine

Tesa 16" Optical Comparator,MDL.355H,TS200 Control.

LeBlond Regal Engine Lathe

1994 Supermax Mdl. LE-1338

LeBlond Engine Lathe

(2) AVAILABLE

24" SWING 96" CENTERS

1994

2001 Mituyoto Crysta Apex

1999 Brown & Sharpe Mdl. PFX-4-5-4

Inspection

Microview Mdl. 514

Mitutoyo OpticalComparator

Hardness Tester

Tesa OpticalComparator

1999

2001

INSPECTION, AIR COMPRESSORS & DRYERS, DUST COLLECTION, OVENS, VEHICLES

– 9 –Can’t make it to the auction in person? Bid live online at

www.BIDITUP.com

INSPECTION, cont.Faro Gold Model Portable Coordinate Measuring Machine, MDL.G08-02, S/N G080202302

Magwerks Black Light Inspection Machine, MDL. 2426, Parts Conveyor,Super Flood UV Lamp, Spectroline MDL. UV-400, Magwerks MDL. CD1212Demagnetizer, S/N 020801

Ircon Black Body Calibration Unit, MDL. 54332-IRCON, InfraredThermometer

Granite Surface Plates: Starrett Pink 60" x 36" x 10";Rohn 24" x 18" x 3 1/2";(3) 36" x 24" x 4"

GSE 10,000 LB Precision Counting Scale,MDL.675,Platform 48" x 48",Printer

GSE MDL. 574 Digital Platform Scale

Mitutoyo Height Master Gauge, Pin Gauges, Calipers, Dial Gauges,Micrometers

Clark Hardness Tester, MDL. C-12, S/N 15916

Brinelli Hardness Tester

AIR COMPRESSORS & DRYERS(2) 2002 335 HP Kaeser Air Compressors, MDL. FS440, 125 PSI,Summer/Winter Mode, Reversible Cooling Fan, S/N 1001 & 1002 (One WithNewer Air End)

Ingersoll Rand MDL. XLE, Oil/Water Separator, S/N JH4214,

Joy Twistair, MDL. 720, S/N 117344

(3) 25 HP Ingersoll Rand, MDL. SSR-EP25SE, 95 CFM, 125 PSI, IntellisysControl, S/N KE 5461U97336

2003 15 HP Kaeser Compressor, MDL. SK19, 110 PSI

(2) 2002 15 HP Kaeser Air Dryer Units, Variable Dewpoint Control,S/N 6007 & 6040

5 HP Quincy, MDL. 325, S/N 393186

25 HP Worthington

2003 New in Box Ingersoll Rand, MDL. Thermo Star 150 Air Dryer, AirCooled, Max 175 PSI, S/N DR10014394-051303

2003 Kaeser Air Dryer, MDL.TB-19

1988 Ingersoll Rand, MDL.TM-300 Refrigerated Air Dryer, S/N 98DTM166

(2) 1997 & 1998 Silvan Industries Air Receivers, S/N & Natl BD308568& BD218449

Conservair 3000 Gallon Air Receiver

DUST COLLECTION(4) Torit Dust Collection Systems, MDL.T3-18, 15 HP, S/N IG467613-001

OVENSChromalloy Electric Oven

(2) Four Door Compartment Gas Pre-Heating Furnaces

VEHICLES1998 Ford Super Duty Truck & Box Trailer, 7.3 L Power Stroke Diesel,Automatic, VIN 1FDXE47FXWHA32199, 15' Supreme Corp Trailer,S/N IA15084096FV17130

2001 Pontiac Grand Prix, 4-Door, Automatic,VIN 1G2WP52K21F271484

1997 Buick LeSabre, 4-Door, Leather Interior, Automatic, VIN 1G4HP5-2K9VH588074

1995 Lagun Mdl. 250S Dah-Lil Mdl. DL-V600

Cincinnati Hydrotel Mdl. 2864 Cincinnati Hydrotel 16" x 52"

Bridgeport Series II Rockford Planer Mill

Bridgeport Series I Starrag Twin Spindle

CNC CNC

(2) AVAILABLE

1995

ROLLING STOCK, BRIDGE CRANES, COMPACTOR, MISCELLANEOUS

– 10 –BIDITUP AUCTIONS & APPRAISALS WORLDWIDE

www.BIDITUP.com

ROLLING STOCK40,000 LB Clark Forklift, MDL. A-90100, LPG,Enclosed Cab,120" Lift Height,S/N CY400-22384-9606,800 LB Clark Forklift, MDL. C500120, LPG, Lift189",S/N 915 3 42356,300 LB Hyster Forklift, MDL. H60SM, LPG, Lift181.5",S/N D177B448445,000 LB Clark Forklift,Type E,Electric,Lift 188",S/NA25C2207733,000 LB Mitsubishi Forklift, MDL.FGC15,LPG,Lift189",S/N AF81A-519382,800 LB Clark Forklift,MDL.TM15/Type E,ThreeWheel Type, Electric, Lift 170", S/N TM145-1387-GEF5280(2) 1,500 LB Economy Pallet Lifts, MDL.CWAF-60,Lift 60",Electric,S/N CB45766AExide Battery Charger, MDL. ES3-24-550, AH 24Cells,Battery Size 550,S/N HR-92080-3-2-1KLifeGuard Battery Charger,MDL.LG18-1050F3B,18Cells,S/N 99M12984Ravens Flatbed, w/Side Kit and Tarp TrailerDorsey Doublee Drop Deck TrailerAMC Drop Deck TrailerFruehauf Flatbed Trailer

BRIDGE CRANES5-Ton MPH Bridge Crane,20' Span(2) 2-Ton P&H Bridge Cranes(4) 1-Ton Yale Bridge Cranes

COMPACTORMac Trash Compactor,MDL.300-2,Horizontal Type,S/N 3112015

MISCELLANEOUS(2) Process Equipment Co CNC Drills,Allen Bradley550 Control,Enclosures,Bliss Press Clutch Assembly;Bliss Press Drive Disc & Flywheel Shaft; MinsterBrake Disc & Connecting Rod;Pangborn CleanerWear Plates; (6) Allen Bradley ProgrammableControllers;(2) Baltimore Air Coil Cooling Towers,MDL. F1342, S/N U0021774; Baltimore Air CoilCooling Tower, MDL.V1-150-1,Four Stage,S/N 74-8523; Evapco Water Circulation Cooling Tower;Dayton 8" Hand Operated Plate Shear,Automated Inclined Conveyor System,Motorized Conveyors, 6' x 8" Wide; (2) HartzellExhaust Fans;Frame 54" x 54",Angled Vent Chute;Peerless Electric Air Blower Vent,MDL.182DS,S/NR2816;New Vibro Dynamics Micro Level Isolators;(2) Crystal Clean Wash Tanks;Parts Washer Tanks;1/2 Yd & 1 Yard Self Dumping Hoppers; TaperNose Stackable Parts Bins; Stackable DropBottom Boxes; Collapsible Wire Bins; Die Racks;Landa Pressure Washer;Enerpac Hydraulic Jacks;Kurt Vises; Grinding Wheels; Collets; C-Clamps;Hand Tools;Number Punch Sets;Lyon,Cleveland,Waterloo 4–12 Drawer Tool Chests; Steel BarStock;Desks;Chairs;Filing Cabinets;Refrigerator;Lockers; 1998 Hewlett Packard Design Jet 700Plotter; Fans;Two Door Combination Safe,ClassB Fire,U-L Lab Inspected,S/N 17637

DoAll Vertical Band Saws Wells 2-Post Horizontal Band Saw

Dake Shop Press

2002 Kaeser Mdl. FS440

2002 Kaeser 15 HP Air Dryers

2003 Kaeser TB-19Compressor & Air Dryer

Thompson 14" x 48"

1989 Okk Mdl. R-6

DoAll Surface Grinders

Radial Drill

1998 Ingersoll TM-300

1998 Air Receivers

4-Door Lang Furnaces

(2) AVAILABLE (2) AVAILABLE

(2) AVAILABLE

2002

1998

2003

2002 1988

150-TON

335 HP

NOTICE OF UPCOMING AUCTIONCOMPLETE SLITTING & CUT TO LENGTH LINES

FEATURING 60" x 1/4" CINCINNATI SLITTING LINE, 72"x 3/8" CINCINNATI/HERR VOSS CUT TO LENGTH LINE,84" PAXSON LEVELER, ROLL FORMERS & PRESS BRAKE

LOCATION: Galesburg, Illinois DATE: Tuesday, July 25, 2006

VISIT www.BIDITUP.com FOR MORE INFORMATION

Cincinnati 60" x 1/4" Slitting Line

Herr Voss/CincinnatiLeveler Straightener

Cincinnati Shear

ROLLING STOCK, BRIDGE CRANES, COMPACTOR, MISCELLANEOUS

– 11 –Can’t make it to the auction in person? Bid live online at

www.BIDITUP.com

1997 Buick LeSabre 2001 Pontiac Grand Prix

Ravens Flatbed, w/Side Kit and Tarp Trailer

Ford 7.3 L Super Duty Truck& Box Trailer

FOR SALEWAREHOUSE/MANUFACTURING BUILDING

DAYTON, OHIO 45403

Torit DustCollectors

Finishing Mill

Drop Bottom Boxes PE CNC Drills

Clark Forklift 40,000 LB Forklift

Yale Bridge Crane 5-Ton MPH Bridge Crane

6,800 LB 40,000 LB

6,300 LB Hyster Forklift

5-TON1-TON

(4) AVAILABLE

(4) AVAILABLE

(2) AVAILABLE

CNC

200

6,300 LB

AUCTIONWednesday, July 26, 2006Beginning at 10:00 A.M. EDT

PREVIEWTuesday, July 25, 20069:00 A.M. to 4:00 P.M. EDT

LOCATION1400 East First StreetDayton, Ohio 45403See Page 5 for Directions and Lodging

FOR THE COMPLETE TERMS& CONDITIONS OF THIS AUCTION

Please visit our website — www.BIDITUP.comand click on HARRIS THOMAS INDUSTRIES

LIVEON-SITE &WEBCAST

MACHINERY AUCTIONJuly 26, 2006

NOW OFFERING IN-HOUSE FINANCING & LEASING. Call 818.508.7034

MANUFACTURER OF FORGED STEEL & ALUMINUM PARTS—— Harris Thomas Industries, Inc. ——

Also for Sale: Harris Thomas Industries, Inc. - Real Estate

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

11426 Ventura BoulevardStudio City, California 91604Phone: 818.508.7034Fax: 818.508.3025info@biditup.comSteven R. Mattes, Auctioneer License #2005000217

BIDITUP Auctions Worldwide CorporationLicense #2005000218

MACHINERY AUCTION, LOOK INSIDE!

ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER

Minster Mdl.90-1200

1999 DieForger

Advanced Ma-chine Bar Shear

For a Complete Listing of Upcoming

Auctions,Visit www.BIDITUP.com.

Register Online and Receive

Auction Updates & Information via E-Mail.

IP-6206065

WEBCASTCan’t attend the auction inperson? You can participateand bid in real time via theInternet. Preview assets withdetailed digital photos, lotcatalogs, and in-depthdescriptions.

For more information, visitwww.BIDITUP.com

Please note, all webcast participants must submit a25% deposit and signed registration forms no laterthan 24 hours before a sale.

1999 Okuma MC-VAEVertical Machining Center

FEATURED AUCTIONWednesday, July 26, 2006 • Dayton, Ohio

MANUFACTURER OF FORGED STEEL & ALUMINUM PARTS—— Harris Thomas Industries, Inc. ——